| Message ID | 20240417131909.7925-7-Jonathan.Cameron@huawei.com |
|---|---|
| State | New |
| Headers | show |
| Series | ACPI/arm64: add support for virtual cpu hotplug | expand |
> From: Jonathan Cameron <jonathan.cameron@huawei.com> > Sent: Wednesday, April 17, 2024 2:19 PM > > From: James Morse <james.morse@arm.com> > > The arm64 specific arch_register_cpu() call may defer CPU registration until > the ACPI interpreter is available and the _STA method can be evaluated. > > If this occurs, then a second attempt is made in acpi_processor_get_info(). > Note that the arm64 specific call has not yet been added so for now this will > be called for the original hotplug case. > > For architectures that do not defer until the ACPI Processor driver loads > (e.g. x86), for initially present CPUs there will already be a CPU device. If > present do not try to register again. > > Systems can still be booted with 'acpi=off', or not include an ACPI > description at all as in these cases arch_register_cpu() will not have > deferred registration when first called. > > This moves the CPU register logic back to a subsys_initcall(), while the > memory nodes will have been registered earlier. > Note this is where the call was prior to the cleanup series so there should be > no side effects of moving it back again for this specific case. > > [PATCH 00/21] Initial cleanups for vCPU HP. > https://lore.kernel.org/all/ZVyz%2FVe5pPu8AWoA@shell.armlinux.org.uk/ > > e.g. 5b95f94c3b9f ("x86/topology: Switch over to GENERIC_CPU_DEVICES") > > Signed-off-by: James Morse <james.morse@arm.com> > Reviewed-by: Gavin Shan <gshan@redhat.com> > Tested-by: Miguel Luis <miguel.luis@oracle.com> > Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> > Tested-by: Jianyong Wu <jianyong.wu@arm.com> > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> > Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Signed-off-by: Joanthan Cameron <Jonathan.Cameron@huawei.com> > --- > v6: Squash the two paths for conventional CPU Hotplug and arm64 > vCPU HP. > v5: Update commit message to make it clear this is moving the > init back to where it was until very recently. > > No longer change the condition in the earlier registration point > as that will be handled by the arm64 registration routine > deferring until called again here. > --- > drivers/acpi/acpi_processor.c | 12 +++++++++++- > 1 file changed, 11 insertions(+), 1 deletion(-) > > diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c > index 7ecb13775d7f..0cac77961020 100644 > --- a/drivers/acpi/acpi_processor.c > +++ b/drivers/acpi/acpi_processor.c > @@ -356,8 +356,18 @@ static int acpi_processor_get_info(struct > acpi_device *device) > * > * NOTE: Even if the processor has a cpuid, it may not be present > * because cpuid <-> apicid mapping is persistent now. > + * > + * Note this allows 3 flows, it is up to the arch_register_cpu() > + * call to reject any that are not supported on a given architecture. > + * A) CPU becomes present. > + * B) Previously invalid logical CPU ID (Same as becoming present) > + * C) CPU already present and now being enabled (and wasn't > registered > + * early on an arch that doesn't defer to here) > */ > - if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) { > + if ((!invalid_logical_cpuid(pr->id) && cpu_present(pr->id) && > + !get_cpu_device(pr->id)) || > + invalid_logical_cpuid(pr->id) || > + !cpu_present(pr->id)) { Logic is clear but it is ugly. We should turn them into macro or inline. Thanks Salil.
On Wed, 17 Apr 2024 16:03:51 +0100 Salil Mehta <salil.mehta@huawei.com> wrote: > > From: Jonathan Cameron <jonathan.cameron@huawei.com> > > Sent: Wednesday, April 17, 2024 2:19 PM > > > > From: James Morse <james.morse@arm.com> > > > > The arm64 specific arch_register_cpu() call may defer CPU registration until > > the ACPI interpreter is available and the _STA method can be evaluated. > > > > If this occurs, then a second attempt is made in acpi_processor_get_info(). > > Note that the arm64 specific call has not yet been added so for now this will > > be called for the original hotplug case. > > > > For architectures that do not defer until the ACPI Processor driver loads > > (e.g. x86), for initially present CPUs there will already be a CPU device. If > > present do not try to register again. > > > > Systems can still be booted with 'acpi=off', or not include an ACPI > > description at all as in these cases arch_register_cpu() will not have > > deferred registration when first called. > > > > This moves the CPU register logic back to a subsys_initcall(), while the > > memory nodes will have been registered earlier. > > Note this is where the call was prior to the cleanup series so there should be > > no side effects of moving it back again for this specific case. > > > > [PATCH 00/21] Initial cleanups for vCPU HP. > > https://lore.kernel.org/all/ZVyz%2FVe5pPu8AWoA@shell.armlinux.org.uk/ > > > > e.g. 5b95f94c3b9f ("x86/topology: Switch over to GENERIC_CPU_DEVICES") > > > > Signed-off-by: James Morse <james.morse@arm.com> > > Reviewed-by: Gavin Shan <gshan@redhat.com> > > Tested-by: Miguel Luis <miguel.luis@oracle.com> > > Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> > > Tested-by: Jianyong Wu <jianyong.wu@arm.com> > > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> > > Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > Signed-off-by: Joanthan Cameron <Jonathan.Cameron@huawei.com> > > --- > > v6: Squash the two paths for conventional CPU Hotplug and arm64 > > vCPU HP. > > v5: Update commit message to make it clear this is moving the > > init back to where it was until very recently. > > > > No longer change the condition in the earlier registration point > > as that will be handled by the arm64 registration routine > > deferring until called again here. > > --- > > drivers/acpi/acpi_processor.c | 12 +++++++++++- > > 1 file changed, 11 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c > > index 7ecb13775d7f..0cac77961020 100644 > > --- a/drivers/acpi/acpi_processor.c > > +++ b/drivers/acpi/acpi_processor.c > > @@ -356,8 +356,18 @@ static int acpi_processor_get_info(struct > > acpi_device *device) > > * > > * NOTE: Even if the processor has a cpuid, it may not be present > > * because cpuid <-> apicid mapping is persistent now. > > + * > > + * Note this allows 3 flows, it is up to the arch_register_cpu() > > + * call to reject any that are not supported on a given architecture. > > + * A) CPU becomes present. > > + * B) Previously invalid logical CPU ID (Same as becoming present) > > + * C) CPU already present and now being enabled (and wasn't > > registered > > + * early on an arch that doesn't defer to here) > > */ > > - if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) { > > + if ((!invalid_logical_cpuid(pr->id) && cpu_present(pr->id) && > > + !get_cpu_device(pr->id)) || > > + invalid_logical_cpuid(pr->id) || > > + !cpu_present(pr->id)) { > > Hi Salil, Thanks for quick review! > Logic is clear but it is ugly. We should turn them into macro or inline. You've found the 'ugly' in this approach vs keeping them separate. For this version I wanted to keep it clear that indeed this condition is a complex mess of different things (and to let people compare it easily with the two paths in v5 to convinced themselves this is the same) It's also a little tricky to do, so will need some thought. I don't think a simple acpi_cpu_is_hotplug() condition is useful as it just moves the complexity away from where a reader is looking and it would only be used in this one case. It doesn't separate well into finer grained subconditions because (C) is a messy case of the vCPU HP case and a not done something else earlier. The disadvantage of only deferring for arm64 and not other architectures. The best I can quickly come up with is something like this: #define acpi_cpu_not_present(cpu) \ (invalid_logical_cpuid(cpu) || !cpu_present(cpu)) #define acpi_cpu_not_enabled(cpu) \ (!invalid_logical_cpuid(cpu) || cpu_present(cpu)) if ((apci_cpu_not_enabled(pr->id) && !get_cpu_device(pr->id) || acpi_cpu_not_present(pr->id)) Which would still need the same amount of documentation. The code still isn't enough for me to immediately be able to see what is going on. So maybe worth it... I'm not sure. Rafael, you get to keep this fun, what would you prefer? Jonathan > > > Thanks > Salil.
On Wed, Apr 17, 2024 at 5:38 PM Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote: > > On Wed, 17 Apr 2024 16:03:51 +0100 > Salil Mehta <salil.mehta@huawei.com> wrote: > > > > From: Jonathan Cameron <jonathan.cameron@huawei.com> > > > Sent: Wednesday, April 17, 2024 2:19 PM > > > > > > From: James Morse <james.morse@arm.com> > > > > > > The arm64 specific arch_register_cpu() call may defer CPU registration until > > > the ACPI interpreter is available and the _STA method can be evaluated. > > > > > > If this occurs, then a second attempt is made in acpi_processor_get_info(). > > > Note that the arm64 specific call has not yet been added so for now this will > > > be called for the original hotplug case. > > > > > > For architectures that do not defer until the ACPI Processor driver loads > > > (e.g. x86), for initially present CPUs there will already be a CPU device. If > > > present do not try to register again. > > > > > > Systems can still be booted with 'acpi=off', or not include an ACPI > > > description at all as in these cases arch_register_cpu() will not have > > > deferred registration when first called. > > > > > > This moves the CPU register logic back to a subsys_initcall(), while the > > > memory nodes will have been registered earlier. > > > Note this is where the call was prior to the cleanup series so there should be > > > no side effects of moving it back again for this specific case. > > > > > > [PATCH 00/21] Initial cleanups for vCPU HP. > > > https://lore.kernel.org/all/ZVyz%2FVe5pPu8AWoA@shell.armlinux.org.uk/ > > > > > > e.g. 5b95f94c3b9f ("x86/topology: Switch over to GENERIC_CPU_DEVICES") > > > > > > Signed-off-by: James Morse <james.morse@arm.com> > > > Reviewed-by: Gavin Shan <gshan@redhat.com> > > > Tested-by: Miguel Luis <miguel.luis@oracle.com> > > > Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> > > > Tested-by: Jianyong Wu <jianyong.wu@arm.com> > > > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> > > > Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > > Signed-off-by: Joanthan Cameron <Jonathan.Cameron@huawei.com> > > > --- > > > v6: Squash the two paths for conventional CPU Hotplug and arm64 > > > vCPU HP. > > > v5: Update commit message to make it clear this is moving the > > > init back to where it was until very recently. > > > > > > No longer change the condition in the earlier registration point > > > as that will be handled by the arm64 registration routine > > > deferring until called again here. > > > --- > > > drivers/acpi/acpi_processor.c | 12 +++++++++++- > > > 1 file changed, 11 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c > > > index 7ecb13775d7f..0cac77961020 100644 > > > --- a/drivers/acpi/acpi_processor.c > > > +++ b/drivers/acpi/acpi_processor.c > > > @@ -356,8 +356,18 @@ static int acpi_processor_get_info(struct > > > acpi_device *device) > > > * > > > * NOTE: Even if the processor has a cpuid, it may not be present > > > * because cpuid <-> apicid mapping is persistent now. > > > + * > > > + * Note this allows 3 flows, it is up to the arch_register_cpu() > > > + * call to reject any that are not supported on a given architecture. > > > + * A) CPU becomes present. > > > + * B) Previously invalid logical CPU ID (Same as becoming present) > > > + * C) CPU already present and now being enabled (and wasn't > > > registered > > > + * early on an arch that doesn't defer to here) > > > */ > > > - if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) { > > > + if ((!invalid_logical_cpuid(pr->id) && cpu_present(pr->id) && > > > + !get_cpu_device(pr->id)) || > > > + invalid_logical_cpuid(pr->id) || > > > + !cpu_present(pr->id)) { > > > > > Hi Salil, > > Thanks for quick review! > > > Logic is clear but it is ugly. We should turn them into macro or inline. > > You've found the 'ugly' in this approach vs keeping them separate. > > For this version I wanted to keep it clear that indeed this condition > is a complex mess of different things (and to let people compare > it easily with the two paths in v5 to convinced themselves this > is the same) > > It's also a little tricky to do, so will need some thought. > > I don't think a simple acpi_cpu_is_hotplug() condition is useful > as it just moves the complexity away from where a reader is looking > and it would only be used in this one case. > > It doesn't separate well into finer grained subconditions because > (C) is a messy case of the vCPU HP case and a not done > something else earlier. The disadvantage of only deferring for > arm64 and not other architectures. > > The best I can quickly come up with is something like this: > #define acpi_cpu_not_present(cpu) \ > (invalid_logical_cpuid(cpu) || !cpu_present(cpu)) > #define acpi_cpu_not_enabled(cpu) \ > (!invalid_logical_cpuid(cpu) || cpu_present(cpu)) > > if ((apci_cpu_not_enabled(pr->id) && !get_cpu_device(pr->id) || > acpi_cpu_not_present(pr->id)) > > Which would still need the same amount of documentation. The > code still isn't enough for me to immediately be able to see > what is going on. > > So maybe worth it... I'm not sure. Rafael, you get to keep this > fun, what would you prefer? I would use a static inline function returning bool to carry out these checks with comments explaining the different cases in which 'true' needs to be returned.
On Wed, 17 Apr 2024 17:59:36 +0200 "Rafael J. Wysocki" <rafael@kernel.org> wrote: > On Wed, Apr 17, 2024 at 5:38 PM Jonathan Cameron > <Jonathan.Cameron@huawei.com> wrote: > > > > On Wed, 17 Apr 2024 16:03:51 +0100 > > Salil Mehta <salil.mehta@huawei.com> wrote: > > > > > > From: Jonathan Cameron <jonathan.cameron@huawei.com> > > > > Sent: Wednesday, April 17, 2024 2:19 PM > > > > > > > > From: James Morse <james.morse@arm.com> > > > > > > > > The arm64 specific arch_register_cpu() call may defer CPU registration until > > > > the ACPI interpreter is available and the _STA method can be evaluated. > > > > > > > > If this occurs, then a second attempt is made in acpi_processor_get_info(). > > > > Note that the arm64 specific call has not yet been added so for now this will > > > > be called for the original hotplug case. > > > > > > > > For architectures that do not defer until the ACPI Processor driver loads > > > > (e.g. x86), for initially present CPUs there will already be a CPU device. If > > > > present do not try to register again. > > > > > > > > Systems can still be booted with 'acpi=off', or not include an ACPI > > > > description at all as in these cases arch_register_cpu() will not have > > > > deferred registration when first called. > > > > > > > > This moves the CPU register logic back to a subsys_initcall(), while the > > > > memory nodes will have been registered earlier. > > > > Note this is where the call was prior to the cleanup series so there should be > > > > no side effects of moving it back again for this specific case. > > > > > > > > [PATCH 00/21] Initial cleanups for vCPU HP. > > > > https://lore.kernel.org/all/ZVyz%2FVe5pPu8AWoA@shell.armlinux.org.uk/ > > > > > > > > e.g. 5b95f94c3b9f ("x86/topology: Switch over to GENERIC_CPU_DEVICES") > > > > > > > > Signed-off-by: James Morse <james.morse@arm.com> > > > > Reviewed-by: Gavin Shan <gshan@redhat.com> > > > > Tested-by: Miguel Luis <miguel.luis@oracle.com> > > > > Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> > > > > Tested-by: Jianyong Wu <jianyong.wu@arm.com> > > > > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> > > > > Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > > > Signed-off-by: Joanthan Cameron <Jonathan.Cameron@huawei.com> > > > > --- > > > > v6: Squash the two paths for conventional CPU Hotplug and arm64 > > > > vCPU HP. > > > > v5: Update commit message to make it clear this is moving the > > > > init back to where it was until very recently. > > > > > > > > No longer change the condition in the earlier registration point > > > > as that will be handled by the arm64 registration routine > > > > deferring until called again here. > > > > --- > > > > drivers/acpi/acpi_processor.c | 12 +++++++++++- > > > > 1 file changed, 11 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c > > > > index 7ecb13775d7f..0cac77961020 100644 > > > > --- a/drivers/acpi/acpi_processor.c > > > > +++ b/drivers/acpi/acpi_processor.c > > > > @@ -356,8 +356,18 @@ static int acpi_processor_get_info(struct > > > > acpi_device *device) > > > > * > > > > * NOTE: Even if the processor has a cpuid, it may not be present > > > > * because cpuid <-> apicid mapping is persistent now. > > > > + * > > > > + * Note this allows 3 flows, it is up to the arch_register_cpu() > > > > + * call to reject any that are not supported on a given architecture. > > > > + * A) CPU becomes present. > > > > + * B) Previously invalid logical CPU ID (Same as becoming present) > > > > + * C) CPU already present and now being enabled (and wasn't > > > > registered > > > > + * early on an arch that doesn't defer to here) > > > > */ > > > > - if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) { > > > > + if ((!invalid_logical_cpuid(pr->id) && cpu_present(pr->id) && > > > > + !get_cpu_device(pr->id)) || > > > > + invalid_logical_cpuid(pr->id) || > > > > + !cpu_present(pr->id)) { > > > > > > > > Hi Salil, > > > > Thanks for quick review! > > > > > Logic is clear but it is ugly. We should turn them into macro or inline. > > > > You've found the 'ugly' in this approach vs keeping them separate. > > > > For this version I wanted to keep it clear that indeed this condition > > is a complex mess of different things (and to let people compare > > it easily with the two paths in v5 to convinced themselves this > > is the same) > > > > It's also a little tricky to do, so will need some thought. > > > > I don't think a simple acpi_cpu_is_hotplug() condition is useful > > as it just moves the complexity away from where a reader is looking > > and it would only be used in this one case. > > > > It doesn't separate well into finer grained subconditions because > > (C) is a messy case of the vCPU HP case and a not done > > something else earlier. The disadvantage of only deferring for > > arm64 and not other architectures. > > > > The best I can quickly come up with is something like this: > > #define acpi_cpu_not_present(cpu) \ > > (invalid_logical_cpuid(cpu) || !cpu_present(cpu)) > > #define acpi_cpu_not_enabled(cpu) \ > > (!invalid_logical_cpuid(cpu) || cpu_present(cpu)) > > > > if ((apci_cpu_not_enabled(pr->id) && !get_cpu_device(pr->id) || > > acpi_cpu_not_present(pr->id)) > > > > Which would still need the same amount of documentation. The > > code still isn't enough for me to immediately be able to see > > what is going on. > > > > So maybe worth it... I'm not sure. Rafael, you get to keep this > > fun, what would you prefer? > > I would use a static inline function returning bool to carry out these > checks with comments explaining the different cases in which 'true' > needs to be returned. The following makes a subtle logic change (I'll retest tomorrow) but I think that get_cpu_device(cpu) can never succeed in a path where hotadd makes sense. +/* + * Identify if the state transition indicates that hotadd_init + * should be called. + * + * For acpi_processor_add() to be called, the reported state must + * now be enabled and present. Conditions reflect prior state. + */ +static inline bool acpi_processor_should_hotadd_init(int cpu) +{ + /* Already register, initial registration was not deferred */ + if (get_cpu_device(cpu)) + return false; + + /* Processor has become present */ + if (!cpu_present(cpu)) + return true; + + /* Logical cpuid currently invalid indicates hotadd */ + if (invalid_logical_cpuid(cpu)) + return true; + + /* + * Previously present and the logical cpu id is valid. + * Deferred registration now _STA can be queries, or + * Hotadd due to enabled becoming true on an online capable + * CPU. + */ + if (cpu_present(cpu)) + return true; + + return false; +} + static int acpi_processor_get_info(struct acpi_device *device) { union acpi_object object = { 0 }; @@ -356,18 +388,8 @@ static int acpi_processor_get_info(struct acpi_device *device) * * NOTE: Even if the processor has a cpuid, it may not be present * because cpuid <-> apicid mapping is persistent now. - * - * Note this allows 3 flows, it is up to the arch_register_cpu() - * call to reject any that are not supported on a given architecture. - * A) CPU becomes present. - * B) Previously invalid logical CPU ID (Same as becoming present) - * C) CPU already present and now being enabled (and wasn't registered - * early on an arch that doesn't defer to here) */ - if ((!invalid_logical_cpuid(pr->id) && cpu_present(pr->id) && - !get_cpu_device(pr->id)) || - invalid_logical_cpuid(pr->id) || - !cpu_present(pr->id)) { + if (acpi_processor_should_hotadd_init(pr->id)) { ret = acpi_processor_hotadd_init(pr, device);
On Wed, Apr 17, 2024 at 7:09 PM Jonathan Cameron <Jonathan.Cameron@huawei.com> wrote: > > On Wed, 17 Apr 2024 17:59:36 +0200 > "Rafael J. Wysocki" <rafael@kernel.org> wrote: > > > On Wed, Apr 17, 2024 at 5:38 PM Jonathan Cameron > > <Jonathan.Cameron@huawei.com> wrote: > > > > > > On Wed, 17 Apr 2024 16:03:51 +0100 > > > Salil Mehta <salil.mehta@huawei.com> wrote: > > > > > > > > From: Jonathan Cameron <jonathan.cameron@huawei.com> > > > > > Sent: Wednesday, April 17, 2024 2:19 PM > > > > > > > > > > From: James Morse <james.morse@arm.com> > > > > > > > > > > The arm64 specific arch_register_cpu() call may defer CPU registration until > > > > > the ACPI interpreter is available and the _STA method can be evaluated. > > > > > > > > > > If this occurs, then a second attempt is made in acpi_processor_get_info(). > > > > > Note that the arm64 specific call has not yet been added so for now this will > > > > > be called for the original hotplug case. > > > > > > > > > > For architectures that do not defer until the ACPI Processor driver loads > > > > > (e.g. x86), for initially present CPUs there will already be a CPU device. If > > > > > present do not try to register again. > > > > > > > > > > Systems can still be booted with 'acpi=off', or not include an ACPI > > > > > description at all as in these cases arch_register_cpu() will not have > > > > > deferred registration when first called. > > > > > > > > > > This moves the CPU register logic back to a subsys_initcall(), while the > > > > > memory nodes will have been registered earlier. > > > > > Note this is where the call was prior to the cleanup series so there should be > > > > > no side effects of moving it back again for this specific case. > > > > > > > > > > [PATCH 00/21] Initial cleanups for vCPU HP. > > > > > https://lore.kernel.org/all/ZVyz%2FVe5pPu8AWoA@shell.armlinux.org.uk/ > > > > > > > > > > e.g. 5b95f94c3b9f ("x86/topology: Switch over to GENERIC_CPU_DEVICES") > > > > > > > > > > Signed-off-by: James Morse <james.morse@arm.com> > > > > > Reviewed-by: Gavin Shan <gshan@redhat.com> > > > > > Tested-by: Miguel Luis <miguel.luis@oracle.com> > > > > > Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> > > > > > Tested-by: Jianyong Wu <jianyong.wu@arm.com> > > > > > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> > > > > > Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > > > > Signed-off-by: Joanthan Cameron <Jonathan.Cameron@huawei.com> > > > > > --- > > > > > v6: Squash the two paths for conventional CPU Hotplug and arm64 > > > > > vCPU HP. > > > > > v5: Update commit message to make it clear this is moving the > > > > > init back to where it was until very recently. > > > > > > > > > > No longer change the condition in the earlier registration point > > > > > as that will be handled by the arm64 registration routine > > > > > deferring until called again here. > > > > > --- > > > > > drivers/acpi/acpi_processor.c | 12 +++++++++++- > > > > > 1 file changed, 11 insertions(+), 1 deletion(-) > > > > > > > > > > diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c > > > > > index 7ecb13775d7f..0cac77961020 100644 > > > > > --- a/drivers/acpi/acpi_processor.c > > > > > +++ b/drivers/acpi/acpi_processor.c > > > > > @@ -356,8 +356,18 @@ static int acpi_processor_get_info(struct > > > > > acpi_device *device) > > > > > * > > > > > * NOTE: Even if the processor has a cpuid, it may not be present > > > > > * because cpuid <-> apicid mapping is persistent now. > > > > > + * > > > > > + * Note this allows 3 flows, it is up to the arch_register_cpu() > > > > > + * call to reject any that are not supported on a given architecture. > > > > > + * A) CPU becomes present. > > > > > + * B) Previously invalid logical CPU ID (Same as becoming present) > > > > > + * C) CPU already present and now being enabled (and wasn't > > > > > registered > > > > > + * early on an arch that doesn't defer to here) > > > > > */ > > > > > - if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) { > > > > > + if ((!invalid_logical_cpuid(pr->id) && cpu_present(pr->id) && > > > > > + !get_cpu_device(pr->id)) || > > > > > + invalid_logical_cpuid(pr->id) || > > > > > + !cpu_present(pr->id)) { > > > > > > > > > > > Hi Salil, > > > > > > Thanks for quick review! > > > > > > > Logic is clear but it is ugly. We should turn them into macro or inline. > > > > > > You've found the 'ugly' in this approach vs keeping them separate. > > > > > > For this version I wanted to keep it clear that indeed this condition > > > is a complex mess of different things (and to let people compare > > > it easily with the two paths in v5 to convinced themselves this > > > is the same) > > > > > > It's also a little tricky to do, so will need some thought. > > > > > > I don't think a simple acpi_cpu_is_hotplug() condition is useful > > > as it just moves the complexity away from where a reader is looking > > > and it would only be used in this one case. > > > > > > It doesn't separate well into finer grained subconditions because > > > (C) is a messy case of the vCPU HP case and a not done > > > something else earlier. The disadvantage of only deferring for > > > arm64 and not other architectures. > > > > > > The best I can quickly come up with is something like this: > > > #define acpi_cpu_not_present(cpu) \ > > > (invalid_logical_cpuid(cpu) || !cpu_present(cpu)) > > > #define acpi_cpu_not_enabled(cpu) \ > > > (!invalid_logical_cpuid(cpu) || cpu_present(cpu)) > > > > > > if ((apci_cpu_not_enabled(pr->id) && !get_cpu_device(pr->id) || > > > acpi_cpu_not_present(pr->id)) > > > > > > Which would still need the same amount of documentation. The > > > code still isn't enough for me to immediately be able to see > > > what is going on. > > > > > > So maybe worth it... I'm not sure. Rafael, you get to keep this > > > fun, what would you prefer? > > > > I would use a static inline function returning bool to carry out these > > checks with comments explaining the different cases in which 'true' > > needs to be returned. > > The following makes a subtle logic change (I'll retest tomorrow) but > I think that get_cpu_device(cpu) can never succeed in a path where > hotadd makes sense. > > +/* > + * Identify if the state transition indicates that hotadd_init > + * should be called. > + * > + * For acpi_processor_add() to be called, the reported state must > + * now be enabled and present. Conditions reflect prior state. > + */ > +static inline bool acpi_processor_should_hotadd_init(int cpu) > +{ > + /* Already register, initial registration was not deferred */ "Already registered." I think. > + if (get_cpu_device(cpu)) > + return false; > + > + /* Processor has become present */ > + if (!cpu_present(cpu)) > + return true; > + > + /* Logical cpuid currently invalid indicates hotadd */ > + if (invalid_logical_cpuid(cpu)) > + return true; > + > + /* > + * Previously present and the logical cpu id is valid. > + * Deferred registration now _STA can be queries, or > + * Hotadd due to enabled becoming true on an online capable > + * CPU. > + */ > + if (cpu_present(cpu)) > + return true; It returns true for both the cpu_present(cpu) and !cpu_present(cpu) cases, so will it ever return false except for when get_cpu_device(cpu) returns true? > + > + return false; > +} > + > static int acpi_processor_get_info(struct acpi_device *device) > { > union acpi_object object = { 0 }; > @@ -356,18 +388,8 @@ static int acpi_processor_get_info(struct acpi_device *device) > * > * NOTE: Even if the processor has a cpuid, it may not be present > * because cpuid <-> apicid mapping is persistent now. > - * > - * Note this allows 3 flows, it is up to the arch_register_cpu() > - * call to reject any that are not supported on a given architecture. > - * A) CPU becomes present. > - * B) Previously invalid logical CPU ID (Same as becoming present) > - * C) CPU already present and now being enabled (and wasn't registered > - * early on an arch that doesn't defer to here) > */ > - if ((!invalid_logical_cpuid(pr->id) && cpu_present(pr->id) && > - !get_cpu_device(pr->id)) || > - invalid_logical_cpuid(pr->id) || > - !cpu_present(pr->id)) { > + if (acpi_processor_should_hotadd_init(pr->id)) { > ret = acpi_processor_hotadd_init(pr, device); >
On Wed, 17 Apr 2024 19:59:50 +0200 "Rafael J. Wysocki" <rafael@kernel.org> wrote: > On Wed, Apr 17, 2024 at 7:09 PM Jonathan Cameron > <Jonathan.Cameron@huawei.com> wrote: > > > > On Wed, 17 Apr 2024 17:59:36 +0200 > > "Rafael J. Wysocki" <rafael@kernel.org> wrote: > > > > > On Wed, Apr 17, 2024 at 5:38 PM Jonathan Cameron > > > <Jonathan.Cameron@huawei.com> wrote: > > > > > > > > On Wed, 17 Apr 2024 16:03:51 +0100 > > > > Salil Mehta <salil.mehta@huawei.com> wrote: > > > > > > > > > > From: Jonathan Cameron <jonathan.cameron@huawei.com> > > > > > > Sent: Wednesday, April 17, 2024 2:19 PM > > > > > > > > > > > > From: James Morse <james.morse@arm.com> > > > > > > > > > > > > The arm64 specific arch_register_cpu() call may defer CPU registration until > > > > > > the ACPI interpreter is available and the _STA method can be evaluated. > > > > > > > > > > > > If this occurs, then a second attempt is made in acpi_processor_get_info(). > > > > > > Note that the arm64 specific call has not yet been added so for now this will > > > > > > be called for the original hotplug case. > > > > > > > > > > > > For architectures that do not defer until the ACPI Processor driver loads > > > > > > (e.g. x86), for initially present CPUs there will already be a CPU device. If > > > > > > present do not try to register again. > > > > > > > > > > > > Systems can still be booted with 'acpi=off', or not include an ACPI > > > > > > description at all as in these cases arch_register_cpu() will not have > > > > > > deferred registration when first called. > > > > > > > > > > > > This moves the CPU register logic back to a subsys_initcall(), while the > > > > > > memory nodes will have been registered earlier. > > > > > > Note this is where the call was prior to the cleanup series so there should be > > > > > > no side effects of moving it back again for this specific case. > > > > > > > > > > > > [PATCH 00/21] Initial cleanups for vCPU HP. > > > > > > https://lore.kernel.org/all/ZVyz%2FVe5pPu8AWoA@shell.armlinux.org.uk/ > > > > > > > > > > > > e.g. 5b95f94c3b9f ("x86/topology: Switch over to GENERIC_CPU_DEVICES") > > > > > > > > > > > > Signed-off-by: James Morse <james.morse@arm.com> > > > > > > Reviewed-by: Gavin Shan <gshan@redhat.com> > > > > > > Tested-by: Miguel Luis <miguel.luis@oracle.com> > > > > > > Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> > > > > > > Tested-by: Jianyong Wu <jianyong.wu@arm.com> > > > > > > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> > > > > > > Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > > > > > > Signed-off-by: Joanthan Cameron <Jonathan.Cameron@huawei.com> > > > > > > --- > > > > > > v6: Squash the two paths for conventional CPU Hotplug and arm64 > > > > > > vCPU HP. > > > > > > v5: Update commit message to make it clear this is moving the > > > > > > init back to where it was until very recently. > > > > > > > > > > > > No longer change the condition in the earlier registration point > > > > > > as that will be handled by the arm64 registration routine > > > > > > deferring until called again here. > > > > > > --- > > > > > > drivers/acpi/acpi_processor.c | 12 +++++++++++- > > > > > > 1 file changed, 11 insertions(+), 1 deletion(-) > > > > > > > > > > > > diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c > > > > > > index 7ecb13775d7f..0cac77961020 100644 > > > > > > --- a/drivers/acpi/acpi_processor.c > > > > > > +++ b/drivers/acpi/acpi_processor.c > > > > > > @@ -356,8 +356,18 @@ static int acpi_processor_get_info(struct > > > > > > acpi_device *device) > > > > > > * > > > > > > * NOTE: Even if the processor has a cpuid, it may not be present > > > > > > * because cpuid <-> apicid mapping is persistent now. > > > > > > + * > > > > > > + * Note this allows 3 flows, it is up to the arch_register_cpu() > > > > > > + * call to reject any that are not supported on a given architecture. > > > > > > + * A) CPU becomes present. > > > > > > + * B) Previously invalid logical CPU ID (Same as becoming present) > > > > > > + * C) CPU already present and now being enabled (and wasn't > > > > > > registered > > > > > > + * early on an arch that doesn't defer to here) > > > > > > */ > > > > > > - if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) { > > > > > > + if ((!invalid_logical_cpuid(pr->id) && cpu_present(pr->id) && > > > > > > + !get_cpu_device(pr->id)) || > > > > > > + invalid_logical_cpuid(pr->id) || > > > > > > + !cpu_present(pr->id)) { > > > > > > > > > > > > > > Hi Salil, > > > > > > > > Thanks for quick review! > > > > > > > > > Logic is clear but it is ugly. We should turn them into macro or inline. > > > > > > > > You've found the 'ugly' in this approach vs keeping them separate. > > > > > > > > For this version I wanted to keep it clear that indeed this condition > > > > is a complex mess of different things (and to let people compare > > > > it easily with the two paths in v5 to convinced themselves this > > > > is the same) > > > > > > > > It's also a little tricky to do, so will need some thought. > > > > > > > > I don't think a simple acpi_cpu_is_hotplug() condition is useful > > > > as it just moves the complexity away from where a reader is looking > > > > and it would only be used in this one case. > > > > > > > > It doesn't separate well into finer grained subconditions because > > > > (C) is a messy case of the vCPU HP case and a not done > > > > something else earlier. The disadvantage of only deferring for > > > > arm64 and not other architectures. > > > > > > > > The best I can quickly come up with is something like this: > > > > #define acpi_cpu_not_present(cpu) \ > > > > (invalid_logical_cpuid(cpu) || !cpu_present(cpu)) > > > > #define acpi_cpu_not_enabled(cpu) \ > > > > (!invalid_logical_cpuid(cpu) || cpu_present(cpu)) > > > > > > > > if ((apci_cpu_not_enabled(pr->id) && !get_cpu_device(pr->id) || > > > > acpi_cpu_not_present(pr->id)) > > > > > > > > Which would still need the same amount of documentation. The > > > > code still isn't enough for me to immediately be able to see > > > > what is going on. > > > > > > > > So maybe worth it... I'm not sure. Rafael, you get to keep this > > > > fun, what would you prefer? > > > > > > I would use a static inline function returning bool to carry out these > > > checks with comments explaining the different cases in which 'true' > > > needs to be returned. > > > > The following makes a subtle logic change (I'll retest tomorrow) but > > I think that get_cpu_device(cpu) can never succeed in a path where > > hotadd makes sense. > > > > +/* > > + * Identify if the state transition indicates that hotadd_init > > + * should be called. > > + * > > + * For acpi_processor_add() to be called, the reported state must > > + * now be enabled and present. Conditions reflect prior state. > > + */ > > +static inline bool acpi_processor_should_hotadd_init(int cpu) > > +{ > > + /* Already register, initial registration was not deferred */ > > "Already registered." I think. > > > + if (get_cpu_device(cpu)) > > + return false; > > + > > + /* Processor has become present */ > > + if (!cpu_present(cpu)) > > + return true; > > + > > + /* Logical cpuid currently invalid indicates hotadd */ > > + if (invalid_logical_cpuid(cpu)) > > + return true; > > + > > + /* > > + * Previously present and the logical cpu id is valid. > > + * Deferred registration now _STA can be queries, or > > + * Hotadd due to enabled becoming true on an online capable > > + * CPU. > > + */ > > + if (cpu_present(cpu)) > > + return true; > > It returns true for both the cpu_present(cpu) and !cpu_present(cpu) > cases, so will it ever return false except for when > get_cpu_device(cpu) returns true? It indeed looks suspicious. My logic is probably wrong. Will check - I guess maybe pulling out the get_cpu_device(cpu) indeed flattens this as you point out. Kind of makes sense if true. Jonathan > > > + > > + return false; > > +} > > + > > static int acpi_processor_get_info(struct acpi_device *device) > > { > > union acpi_object object = { 0 }; > > @@ -356,18 +388,8 @@ static int acpi_processor_get_info(struct acpi_device *device) > > * > > * NOTE: Even if the processor has a cpuid, it may not be present > > * because cpuid <-> apicid mapping is persistent now. > > - * > > - * Note this allows 3 flows, it is up to the arch_register_cpu() > > - * call to reject any that are not supported on a given architecture. > > - * A) CPU becomes present. > > - * B) Previously invalid logical CPU ID (Same as becoming present) > > - * C) CPU already present and now being enabled (and wasn't registered > > - * early on an arch that doesn't defer to here) > > */ > > - if ((!invalid_logical_cpuid(pr->id) && cpu_present(pr->id) && > > - !get_cpu_device(pr->id)) || > > - invalid_logical_cpuid(pr->id) || > > - !cpu_present(pr->id)) { > > + if (acpi_processor_should_hotadd_init(pr->id)) { > > ret = acpi_processor_hotadd_init(pr, device); > >
diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index 7ecb13775d7f..0cac77961020 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -356,8 +356,18 @@ static int acpi_processor_get_info(struct acpi_device *device) * * NOTE: Even if the processor has a cpuid, it may not be present * because cpuid <-> apicid mapping is persistent now. + * + * Note this allows 3 flows, it is up to the arch_register_cpu() + * call to reject any that are not supported on a given architecture. + * A) CPU becomes present. + * B) Previously invalid logical CPU ID (Same as becoming present) + * C) CPU already present and now being enabled (and wasn't registered + * early on an arch that doesn't defer to here) */ - if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) { + if ((!invalid_logical_cpuid(pr->id) && cpu_present(pr->id) && + !get_cpu_device(pr->id)) || + invalid_logical_cpuid(pr->id) || + !cpu_present(pr->id)) { ret = acpi_processor_hotadd_init(pr, device); if (ret)