mbox series

[00/17] HSI2, UFS & UFS phy support for Tensor GS101

Message ID 20240404122559.898930-1-peter.griffin@linaro.org
Headers show
Series HSI2, UFS & UFS phy support for Tensor GS101 | expand

Message

Peter Griffin April 4, 2024, 12:25 p.m. UTC 
Hi folks,

This series adds support for the High Speed Interface (HSI) 2 clock
management unit, UFS controller and UFS phy calibration/tuning for GS101.

With this series applied, UFS is now functional! The SKhynix HN8T05BZGKX015
can be enumerated, partitions mounted etc. This then allows us to move away
from the initramfs rootfs we have been using for development so far.

The intention is this series will be merged via Krzysztofs Samsung Exynos
tree(s). This series is rebased on next-20240404.

The series is broadly split into the following parts:
1) dt-bindings documentation updates
2) gs101 device tree updates
3) Prepatory patches for samsung-ufs driver
4) GS101 ufs-phy support
5) Prepatory patches for ufs-exynos driver
6) GS101 ufs-exynos support

Question
========

Currently the link comes up in Gear 3 due to ufshcd_init_host_params()
host_params initialisation. If I update that to use UFS_HS_G4 for
negotiation then the link come up in Gear 4. I propose (in a future patch)
to use VER register offset 0x8 to determine whether to set G4 capability
or not (if major version is >= 3).

The bitfield of VER register in gs101 docs is

RSVD [31:16] Reserved
MJR [15:8] Major version number
MNR [7:4] Minor version number
VS [3:0] Version Suffix

Can anyone confirm if other Exynos platforms supported by this driver have
the same register, and if it conforms to the bitfield described above?

I'm also open to suggestions on how else to detect and set G4 if others
have a better idea. It looks like MTK and QCOM drivers both use a version
field, hence the proposal above.

fyi I'm out of office until Monday 12th April, so I will deal with any
review feedback upon my return :-)

For anyone wishing to try out the upstream kernel on their Pixel 6 device
you can find the README on how to build / flash the kernel here
https://git.codelinaro.org/linaro/googlelt/pixelscripts

kind regards,

Peter

Peter Griffin (17):
  dt-bindings: clock: google,gs101-clock:  add HSI2 clock management
    unit
  dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg
    compatible
  dt-bindings: ufs: exynos-ufs: Add gs101 compatible
  dt-bindings: phy: samsung,ufs-phy: Add dedicated gs101-ufs-phy
    compatible
  arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  arm64: dts: exynos: gs101: Add the hsi2 sysreg node
  arm64: dts: exynos: gs101: Add ufs, ufs-phy and ufs regulator dt nodes
  clk: samsung: gs101: add support for cmu_hsi2
  phy: samsung-ufs: use exynos_get_pmu_regmap_by_phandle() to obtain PMU
    regmap
  phy: samsung-ufs: ufs: Add SoC callbacks for calibration and clk data
    recovery
  phy: samsung-ufs: ufs: Add support for gs101 UFS phy tuning
  scsi: ufs: host: ufs-exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
  scsi: ufs: host: ufs-exynos: add EXYNOS_UFS_OPT_TIMER_TICK_SELECT
    option
  scsi: ufs: host: ufs-exynos: allow max frequencies up to 267Mhz
  scsi: ufs: host: ufs-exynos: add some pa_dbg_ register offsets into
    drvdata
  scsi: ufs: host: ufs-exynos: Add support for Tensor gs101 SoC
  MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.

 .../bindings/clock/google,gs101-clock.yaml    |  30 +-
 .../bindings/phy/samsung,ufs-phy.yaml         |   1 +
 .../soc/samsung/samsung,exynos-sysreg.yaml    |   2 +
 .../bindings/ufs/samsung,exynos-ufs.yaml      |  51 +-
 MAINTAINERS                                   |   1 +
 .../boot/dts/exynos/google/gs101-oriole.dts   |  17 +
 arch/arm64/boot/dts/exynos/google/gs101.dtsi  |  53 ++
 drivers/clk/samsung/clk-gs101.c               | 558 ++++++++++++++++++
 drivers/phy/samsung/Makefile                  |   1 +
 drivers/phy/samsung/phy-exynos7-ufs.c         |   1 +
 drivers/phy/samsung/phy-exynosautov9-ufs.c    |   1 +
 drivers/phy/samsung/phy-fsd-ufs.c             |   1 +
 drivers/phy/samsung/phy-gs101-ufs.c           | 182 ++++++
 drivers/phy/samsung/phy-samsung-ufs.c         |  21 +-
 drivers/phy/samsung/phy-samsung-ufs.h         |   6 +
 drivers/ufs/host/ufs-exynos.c                 | 197 ++++++-
 drivers/ufs/host/ufs-exynos.h                 |  24 +-
 include/dt-bindings/clock/google,gs101.h      |  63 ++
 18 files changed, 1179 insertions(+), 31 deletions(-)
 create mode 100644 drivers/phy/samsung/phy-gs101-ufs.c

Comments

Vinod Koul April 6, 2024, 9:19 a.m. UTC | #1 
On Thu, 04 Apr 2024 13:25:42 +0100, Peter Griffin wrote:
> This series adds support for the High Speed Interface (HSI) 2 clock
> management unit, UFS controller and UFS phy calibration/tuning for GS101.
> 
> With this series applied, UFS is now functional! The SKhynix HN8T05BZGKX015
> can be enumerated, partitions mounted etc. This then allows us to move away
> from the initramfs rootfs we have been using for development so far.
> 
> [...]

Applied, thanks!

[04/17] dt-bindings: phy: samsung,ufs-phy: Add dedicated gs101-ufs-phy compatible
        commit: 724e4fc053fe217d0ed477517ae68db11feab1f5
[09/17] phy: samsung-ufs: use exynos_get_pmu_regmap_by_phandle() to obtain PMU regmap
        commit: f2c6d0fa197a1558f4ef50162bb87e6644af232d
[10/17] phy: samsung-ufs: ufs: Add SoC callbacks for calibration and clk data recovery
        commit: a4de58a9096b471f9dc1c2bc6bfaa8aa48110c31
[11/17] phy: samsung-ufs: ufs: Add support for gs101 UFS phy tuning
        commit: c1cf725db1065153459f0deb69bd4d497a5fd183
[17/17] MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.
        commit: 0338e1d2f933a4ec7ae96ed1f40c39b899e357d7

Best regards,
Alim Akhtar April 8, 2024, 8:30 a.m. UTC | #2 
Hi Peter

> -----Original Message-----
> From: Peter Griffin <peter.griffin@linaro.org>
> Sent: Thursday, April 4, 2024 5:56 PM
> To: mturquette@baylibre.com; sboyd@kernel.org; robh@kernel.org;
> krzk+dt@kernel.org; conor+dt@kernel.org; vkoul@kernel.org;
> kishon@kernel.org; alim.akhtar@samsung.com; avri.altman@wdc.com;
> bvanassche@acm.org; s.nawrocki@samsung.com; cw00.choi@samsung.com;
> jejb@linux.ibm.com; martin.petersen@oracle.com;
> chanho61.park@samsung.com; ebiggers@kernel.org
> Cc: linux-scsi@vger.kernel.org; linux-phy@lists.infradead.org;
> devicetree@vger.kernel.org; linux-clk@vger.kernel.org; linux-samsung-
> soc@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; tudor.ambarus@linaro.org;
> andre.draszik@linaro.org; saravanak@google.com;
> willmcvicker@google.com; Peter Griffin <peter.griffin@linaro.org>
> Subject: [PATCH 00/17] HSI2, UFS & UFS phy support for Tensor GS101
> 
> Hi folks,
> 
> 
> Question
> ========
> 
> Currently the link comes up in Gear 3 due to ufshcd_init_host_params()
> host_params initialisation. If I update that to use UFS_HS_G4 for
negotiation
> then the link come up in Gear 4. I propose (in a future patch) to use VER
> register offset 0x8 to determine whether to set G4 capability or not (if
major
> version is >= 3).
> 
> The bitfield of VER register in gs101 docs is
> 
> RSVD [31:16] Reserved
> MJR [15:8] Major version number
> MNR [7:4] Minor version number
> VS [3:0] Version Suffix
> 
> Can anyone confirm if other Exynos platforms supported by this driver have
> the same register, and if it conforms to the bitfield described above?
> 

VER (offset 0x8) is standard UFS HCI spec, so all vendor need to have this
(unless something really wrong with the HW)
Yes, Exynos and FSD SoC has these bitfield implemented.
 
> 
> 2.44.0.478.gd926399ef9-goog
Peter Griffin April 16, 2024, 10:28 a.m. UTC | #3 
Hi Krzysztof,

On Fri, 5 Apr 2024 at 08:45, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On 04/04/2024 14:25, Peter Griffin wrote:
> > Hi folks,
> >
> > This series adds support for the High Speed Interface (HSI) 2 clock
> > management unit, UFS controller and UFS phy calibration/tuning for GS101.
> >
> > With this series applied, UFS is now functional! The SKhynix HN8T05BZGKX015
> > can be enumerated, partitions mounted etc. This then allows us to move away
> > from the initramfs rootfs we have been using for development so far.
> >
> > The intention is this series will be merged via Krzysztofs Samsung Exynos
> > tree(s). This series is rebased on next-20240404.
> >
> > The series is broadly split into the following parts:
> > 1) dt-bindings documentation updates
> > 2) gs101 device tree updates
> > 3) Prepatory patches for samsung-ufs driver
> > 4) GS101 ufs-phy support
> > 5) Prepatory patches for ufs-exynos driver
> > 6) GS101 ufs-exynos support
>
> UFS phy and host should go through their trees. What is the
> reason/need/requirement to put it into this patchset and merge via
> Samsung SoC tree?

Good point, there is no requirement for it to all go via Samsung SoC
tree I will remove that from the cover letter in future versions.
I see Vinod has already queued the phy parts of the series which is great :-)

regards,

Peter
Peter Griffin April 16, 2024, 10:29 a.m. UTC | #4 
Hi Alim,

Thanks for your review feedback.

On Mon, 8 Apr 2024 at 09:30, Alim Akhtar <alim.akhtar@samsung.com> wrote:
>
> Hi Peter
>
> > -----Original Message-----
> > From: Peter Griffin <peter.griffin@linaro.org>
> > Sent: Thursday, April 4, 2024 5:56 PM
> > To: mturquette@baylibre.com; sboyd@kernel.org; robh@kernel.org;
> > krzk+dt@kernel.org; conor+dt@kernel.org; vkoul@kernel.org;
> > kishon@kernel.org; alim.akhtar@samsung.com; avri.altman@wdc.com;
> > bvanassche@acm.org; s.nawrocki@samsung.com; cw00.choi@samsung.com;
> > jejb@linux.ibm.com; martin.petersen@oracle.com;
> > chanho61.park@samsung.com; ebiggers@kernel.org
> > Cc: linux-scsi@vger.kernel.org; linux-phy@lists.infradead.org;
> > devicetree@vger.kernel.org; linux-clk@vger.kernel.org; linux-samsung-
> > soc@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-
> > kernel@lists.infradead.org; tudor.ambarus@linaro.org;
> > andre.draszik@linaro.org; saravanak@google.com;
> > willmcvicker@google.com; Peter Griffin <peter.griffin@linaro.org>
> > Subject: [PATCH 00/17] HSI2, UFS & UFS phy support for Tensor GS101
> >
> > Hi folks,
> >
> >
> > Question
> > ========
> >
> > Currently the link comes up in Gear 3 due to ufshcd_init_host_params()
> > host_params initialisation. If I update that to use UFS_HS_G4 for
> negotiation
> > then the link come up in Gear 4. I propose (in a future patch) to use VER
> > register offset 0x8 to determine whether to set G4 capability or not (if
> major
> > version is >= 3).
> >
> > The bitfield of VER register in gs101 docs is
> >
> > RSVD [31:16] Reserved
> > MJR [15:8] Major version number
> > MNR [7:4] Minor version number
> > VS [3:0] Version Suffix
> >
> > Can anyone confirm if other Exynos platforms supported by this driver have
> > the same register, and if it conforms to the bitfield described above?
> >
>
> VER (offset 0x8) is standard UFS HCI spec, so all vendor need to have this
> (unless something really wrong with the HW)
> Yes, Exynos and FSD SoC has these bitfield implemented.

Thanks for confirming! I will look to propose something once this
series is merged.

Peter.