diff mbox series

[v5,15/16] qcom_defconfig: enable USB

Message ID 20240328-b4-qcom-livetree-v5-15-4e98228b3d03@linaro.org
State Superseded
Headers show
Series Qualcomm platform USB support | expand

Commit Message

Caleb Connolly March 28, 2024, 5:59 p.m. UTC
Enable support for the DWC3 USB controller and required dependencies for
Qualcomm boards, specifically the DB845c:
* IOMMU / SMMU
* USB high-speed PHYs
* Mass storage and ACM gadgets

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---
 configs/qcom_defconfig | 52 ++++++++++++++++++++++++++++----------------------
 1 file changed, 29 insertions(+), 23 deletions(-)

Comments

Sumit Garg April 1, 2024, 4:50 a.m. UTC | #1
On Thu, 28 Mar 2024 at 23:29, Caleb Connolly <caleb.connolly@linaro.org> wrote:
>
> Enable support for the DWC3 USB controller and required dependencies for
> Qualcomm boards, specifically the DB845c:
> * IOMMU / SMMU
> * USB high-speed PHYs
> * Mass storage and ACM gadgets
>
> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
> ---
>  configs/qcom_defconfig | 52 ++++++++++++++++++++++++++++----------------------
>  1 file changed, 29 insertions(+), 23 deletions(-)
>

Reviewed-by: Sumit Garg <sumit.garg@linaro.org>

-Sumit

> diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
> index 8c4402e8f780..1abb57345ff1 100644
> --- a/configs/qcom_defconfig
> +++ b/configs/qcom_defconfig
> @@ -17,10 +17,16 @@ CONFIG_LOG_MAX_LEVEL=9
>  CONFIG_LOG_DEFAULT_LEVEL=4
>  # CONFIG_DISPLAY_CPUINFO is not set
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
>  CONFIG_CMD_BOOTMENU=y
> +CONFIG_CMD_EEPROM=y
> +CONFIG_SYS_I2C_EEPROM_BUS=2
> +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
> +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
> +# CONFIG_CMD_BIND is not set
>  CONFIG_CMD_CLK=y
>  CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_UFS=y
>  CONFIG_CMD_USB=y
>  CONFIG_CMD_CAT=y
> @@ -32,20 +38,39 @@ CONFIG_CLK=y
>  CONFIG_CLK_QCOM_QCS404=y
>  CONFIG_CLK_QCOM_SDM845=y
>  CONFIG_MSM_GPIO=y
>  CONFIG_QCOM_PMIC_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_QUP=y
> +CONFIG_I2C_MUX=y
>  CONFIG_DM_KEYBOARD=y
>  CONFIG_BUTTON_KEYBOARD=y
> +CONFIG_IOMMU=y
> +CONFIG_QCOM_HYP_SMMU=y
> +CONFIG_MISC=y
> +CONFIG_NVMEM=y
> +CONFIG_I2C_EEPROM=y
>  CONFIG_MMC_HS200_SUPPORT=y
>  CONFIG_MMC_SDHCI=y
>  CONFIG_MMC_SDHCI_ADMA=y
>  CONFIG_MMC_SDHCI_MSM=y
> +CONFIG_PHY_MICREL=y
> +CONFIG_PHY_MICREL_KSZ90X1=y
> +CONFIG_DM_MDIO=y
> +CONFIG_DM_ETH_PHY=y
> +CONFIG_DWC_ETH_QOS=y
> +CONFIG_DWC_ETH_QOS_QCOM=y
> +CONFIG_RGMII=y
>  CONFIG_PHY=y
> +CONFIG_PHY_QCOM_QUSB2=y
> +CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
>  CONFIG_PINCTRL=y
>  CONFIG_PINCTRL_QCOM_QCS404=y
>  CONFIG_PINCTRL_QCOM_SDM845=y
>  CONFIG_DM_PMIC=y
>  CONFIG_PMIC_QCOM=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
>  CONFIG_SCSI=y
>  CONFIG_MSM_SERIAL=y
>  CONFIG_MSM_GENI_SERIAL=y
>  CONFIG_SPMI_MSM=y
> @@ -54,8 +79,12 @@ CONFIG_SYSINFO_SMBIOS=y
>  CONFIG_USB=y
>  CONFIG_USB_XHCI_HCD=y
>  CONFIG_USB_XHCI_DWC3=y
>  CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GENERIC=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_DOWNLOAD=y
> +CONFIG_USB_FUNCTION_MASS_STORAGE=y
>  CONFIG_UFS=y
>  CONFIG_VIDEO=y
>  # CONFIG_VIDEO_FONT_8X16 is not set
>  CONFIG_VIDEO_FONT_16X32=y
> @@ -64,27 +93,4 @@ CONFIG_NO_FB_CLEAR=y
>  CONFIG_VIDEO_SIMPLE=y
>  CONFIG_HEXDUMP=y
>  # CONFIG_GENERATE_SMBIOS_TABLE is not set
>  CONFIG_LMB_MAX_REGIONS=64
> -CONFIG_CMD_DHCP=y
> -CONFIG_CMD_EEPROM=y
> -CONFIG_CMD_I2C=y
> -CONFIG_CMD_PING=y
> -CONFIG_DM_ETH=y
> -CONFIG_DM_ETH_PHY=y
> -CONFIG_DM_MDIO=y
> -CONFIG_DWC_ETH_QOS=y
> -CONFIG_DWC_ETH_QOS_QCOM=y
> -CONFIG_RGMII=y
> -CONFIG_PHY_MICREL=y
> -CONFIG_PHY_MICREL_KSZ90X1=y
> -CONFIG_MISC=y
> -CONFIG_NVMEM=y
> -CONFIG_DM_I2C=y
> -CONFIG_I2C_SUPPORT=y
> -CONFIG_I2C_MUX=y
> -CONFIG_I2C_EEPROM=y
> -CONFIG_SYS_I2C=y
> -CONFIG_SYS_I2C_QUP=y
> -CONFIG_SYS_I2C_EEPROM_BUS=2
> -CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
> -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
>
> --
> 2.44.0
>
diff mbox series

Patch

diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
index 8c4402e8f780..1abb57345ff1 100644
--- a/configs/qcom_defconfig
+++ b/configs/qcom_defconfig
@@ -17,10 +17,16 @@  CONFIG_LOG_MAX_LEVEL=9
 CONFIG_LOG_DEFAULT_LEVEL=4
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_BUS=2
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
+# CONFIG_CMD_BIND is not set
 CONFIG_CMD_CLK=y
 CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_UFS=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CAT=y
@@ -32,20 +38,39 @@  CONFIG_CLK=y
 CONFIG_CLK_QCOM_QCS404=y
 CONFIG_CLK_QCOM_SDM845=y
 CONFIG_MSM_GPIO=y
 CONFIG_QCOM_PMIC_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_QUP=y
+CONFIG_I2C_MUX=y
 CONFIG_DM_KEYBOARD=y
 CONFIG_BUTTON_KEYBOARD=y
+CONFIG_IOMMU=y
+CONFIG_QCOM_HYP_SMMU=y
+CONFIG_MISC=y
+CONFIG_NVMEM=y
+CONFIG_I2C_EEPROM=y
 CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ADMA=y
 CONFIG_MMC_SDHCI_MSM=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_QCOM=y
+CONFIG_RGMII=y
 CONFIG_PHY=y
+CONFIG_PHY_QCOM_QUSB2=y
+CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_QCOM_QCS404=y
 CONFIG_PINCTRL_QCOM_SDM845=y
 CONFIG_DM_PMIC=y
 CONFIG_PMIC_QCOM=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_SCSI=y
 CONFIG_MSM_SERIAL=y
 CONFIG_MSM_GENI_SERIAL=y
 CONFIG_SPMI_MSM=y
@@ -54,8 +79,12 @@  CONFIG_SYSINFO_SMBIOS=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_MASS_STORAGE=y
 CONFIG_UFS=y
 CONFIG_VIDEO=y
 # CONFIG_VIDEO_FONT_8X16 is not set
 CONFIG_VIDEO_FONT_16X32=y
@@ -64,27 +93,4 @@  CONFIG_NO_FB_CLEAR=y
 CONFIG_VIDEO_SIMPLE=y
 CONFIG_HEXDUMP=y
 # CONFIG_GENERATE_SMBIOS_TABLE is not set
 CONFIG_LMB_MAX_REGIONS=64
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PING=y
-CONFIG_DM_ETH=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_DM_MDIO=y
-CONFIG_DWC_ETH_QOS=y
-CONFIG_DWC_ETH_QOS_QCOM=y
-CONFIG_RGMII=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_MISC=y
-CONFIG_NVMEM=y
-CONFIG_DM_I2C=y
-CONFIG_I2C_SUPPORT=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C=y
-CONFIG_SYS_I2C_QUP=y
-CONFIG_SYS_I2C_EEPROM_BUS=2
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5