@@ -95,7 +95,6 @@ struct admv1013_state {
struct clk *clkin;
/* Protect against concurrent accesses to the device and to data */
struct mutex lock;
- struct regulator *reg;
struct notifier_block nb;
unsigned int input_mode;
unsigned int quad_se_mode;
@@ -342,14 +341,9 @@ static int admv1013_update_quad_filters(struct admv1013_state *st)
FIELD_PREP(ADMV1013_QUAD_FILTERS_MSK, filt_raw));
}
-static int admv1013_update_mixer_vgate(struct admv1013_state *st)
+static int admv1013_update_mixer_vgate(struct admv1013_state *st, int vcm)
{
unsigned int mixer_vgate;
- int vcm;
-
- vcm = regulator_get_voltage(st->reg);
- if (vcm < 0)
- return vcm;
if (vcm <= 1800000)
mixer_vgate = (2389 * vcm / 1000000 + 8100) / 100;
@@ -443,7 +437,7 @@ static const struct iio_chan_spec admv1013_channels[] = {
ADMV1013_CHAN_CALIB(1, Q),
};
-static int admv1013_init(struct admv1013_state *st)
+static int admv1013_init(struct admv1013_state *st, int vcm_uv)
{
int ret;
unsigned int data;
@@ -483,7 +477,7 @@ static int admv1013_init(struct admv1013_state *st)
if (ret)
return ret;
- ret = admv1013_update_mixer_vgate(st);
+ ret = admv1013_update_mixer_vgate(st, vcm_uv);
if (ret)
return ret;
@@ -498,11 +492,6 @@ static int admv1013_init(struct admv1013_state *st)
st->input_mode);
}
-static void admv1013_reg_disable(void *data)
-{
- regulator_disable(data);
-}
-
static void admv1013_powerdown(void *data)
{
unsigned int enable_reg, enable_reg_msk;
@@ -557,11 +546,6 @@ static int admv1013_properties_parse(struct admv1013_state *st)
else
return -EINVAL;
- st->reg = devm_regulator_get(&spi->dev, "vcm");
- if (IS_ERR(st->reg))
- return dev_err_probe(&spi->dev, PTR_ERR(st->reg),
- "failed to get the common-mode voltage\n");
-
ret = devm_regulator_bulk_get_enable(&st->spi->dev,
ARRAY_SIZE(admv1013_vcc_regs),
admv1013_vcc_regs);
@@ -578,7 +562,7 @@ static int admv1013_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
struct admv1013_state *st;
- int ret;
+ int ret, vcm_uv;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
@@ -597,16 +581,11 @@ static int admv1013_probe(struct spi_device *spi)
if (ret)
return ret;
- ret = regulator_enable(st->reg);
- if (ret) {
- dev_err(&spi->dev, "Failed to enable specified Common-Mode Voltage!\n");
+ ret = devm_regulator_get_enable_get_voltage(&spi->dev, "vcm");
+ if (ret < 0)
return ret;
- }
- ret = devm_add_action_or_reset(&spi->dev, admv1013_reg_disable,
- st->reg);
- if (ret)
- return ret;
+ vcm_uv = ret;
st->clkin = devm_clk_get_enabled(&spi->dev, "lo_in");
if (IS_ERR(st->clkin))
@@ -620,7 +599,7 @@ static int admv1013_probe(struct spi_device *spi)
mutex_init(&st->lock);
- ret = admv1013_init(st);
+ ret = admv1013_init(st, vcm_uv);
if (ret) {
dev_err(&spi->dev, "admv1013 init failed\n");
return ret;
We can reduce boilerplate code by using devm_regulator_get_enable_get_voltage(). The common mode voltage is now passed as a parameter in the init functions so we can avoid adding a state member that is only used during init. Signed-off-by: David Lechner <dlechner@baylibre.com> --- drivers/iio/frequency/admv1013.c | 37 ++++++++----------------------------- 1 file changed, 8 insertions(+), 29 deletions(-)