diff mbox series

[v2] arm64: dts: qcom: sm6350: Add Crypto Engine

Message ID 20240219-sm6350-qce-v2-1-7acb8838f248@fairphone.com
State Accepted
Commit fd5afa5d7e5259cb2320fbe2cf60250f7336f439
Headers show
Series [v2] arm64: dts: qcom: sm6350: Add Crypto Engine | expand

Commit Message

Luca Weiss Feb. 19, 2024, 10:16 a.m. UTC
Add crypto engine (CE) and CE BAM related nodes and definitions for this
SoC.

For reference:

  [    2.297419] qcrypto 1dfa000.crypto: Crypto device found, version 5.5.1

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
Add the compatible and nodes for the QCE found on SM6350 SoC.

Not completely sure how to fully test it but "kcapi-speed --all" shows
no issues. Let me know if I can/should test this more.
---
Changes in v2:
- Drop applied patch
- Sort iommu entries & drop extra leading zeroes from mask
- Link to v1: https://lore.kernel.org/r/20240105-sm6350-qce-v1-0-416e5c7319ac@fairphone.com
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)


---
base-commit: 6af5a37dbe961391c3c357c0799d76dcd7c280e4
change-id: 20240105-sm6350-qce-c6233abbf54f

Best regards,

Comments

Bjorn Andersson March 19, 2024, 2:48 a.m. UTC | #1
On Mon, 19 Feb 2024 11:16:02 +0100, Luca Weiss wrote:
> Add crypto engine (CE) and CE BAM related nodes and definitions for this
> SoC.
> 
> For reference:
> 
>   [    2.297419] qcrypto 1dfa000.crypto: Crypto device found, version 5.5.1
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: sm6350: Add Crypto Engine
      commit: fd5afa5d7e5259cb2320fbe2cf60250f7336f439

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 43cffe8e1247..7a14b040d140 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1202,6 +1202,37 @@  ufs_mem_phy: phy@1d87000 {
 			status = "disabled";
 		};
 
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <16>;
+			qcom,num-ees = <4>;
+			iommus = <&apps_smmu 0x426 0x11>,
+				 <&apps_smmu 0x432 0x0>,
+				 <&apps_smmu 0x436 0x11>,
+				 <&apps_smmu 0x438 0x1>,
+				 <&apps_smmu 0x43f 0x0>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm6350-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x426 0x11>,
+				 <&apps_smmu 0x432 0x0>,
+				 <&apps_smmu 0x436 0x11>,
+				 <&apps_smmu 0x438 0x1>,
+				 <&apps_smmu 0x43f 0x0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+		};
+
 		ipa: ipa@1e40000 {
 			compatible = "qcom,sm6350-ipa";