@@ -211,6 +211,17 @@ config ARM_CHARLCD
line and the Linux version on the second line, but that's
still useful.
+config SEG_LED_GPIO
+ tristate "Generic 7-segment LED display"
+ depends on GPIOLIB || COMPILE_TEST
+ select LINEDISP
+ help
+ This driver supports a generic 7-segment LED display made up
+ of GPIO pins connected to the individual segments.
+
+ This driver can also be built as a module. If so, the module
+ will be called seg-led-gpio.
+
menuconfig PARPORT_PANEL
tristate "Parallel port LCD/Keypad Panel support"
depends on PARPORT
@@ -15,3 +15,4 @@ obj-$(CONFIG_PARPORT_PANEL) += panel.o
obj-$(CONFIG_LCD2S) += lcd2s.o
obj-$(CONFIG_LINEDISP) += line-display.o
obj-$(CONFIG_MAX6959) += max6959.o
+obj-$(CONFIG_SEG_LED_GPIO) += seg-led-gpio.o
new file mode 100644
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for a 7-segment LED display
+ *
+ * The decimal point LED present on some devices is currently not
+ * supported.
+ *
+ * Copyright (C) Allied Telesis Labs
+ */
+
+#include <linux/bitmap.h>
+#include <linux/container_of.h>
+#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/map_to_7segment.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include "line-display.h"
+
+struct seg_led_priv {
+ struct linedisp linedisp;
+ struct delayed_work work;
+ struct gpio_descs *segment_gpios;
+};
+
+static void seg_led_update(struct work_struct *work)
+{
+ struct seg_led_priv *priv = container_of(work, struct seg_led_priv, work.work);
+ struct linedisp *linedisp = &priv->linedisp;
+ struct linedisp_map *map = linedisp->map;
+ DECLARE_BITMAP(values, 8) = { 0 };
+
+ bitmap_set_value8(values, map_to_seg7(&map->map.seg7, linedisp->buf[0]), 0);
+
+ gpiod_set_array_value_cansleep(priv->segment_gpios->ndescs, priv->segment_gpios->desc,
+ priv->segment_gpios->info, values);
+}
+
+static int seg_led_linedisp_get_map_type(struct linedisp *linedisp)
+{
+ struct seg_led_priv *priv = container_of(linedisp, struct seg_led_priv, linedisp);
+
+ INIT_DELAYED_WORK(&priv->work, seg_led_update);
+ return LINEDISP_MAP_SEG7;
+}
+
+static void seg_led_linedisp_update(struct linedisp *linedisp)
+{
+ struct seg_led_priv *priv = container_of(linedisp, struct seg_led_priv, linedisp);
+
+ schedule_delayed_work(&priv->work, 0);
+}
+
+static const struct linedisp_ops seg_led_linedisp_ops = {
+ .get_map_type = seg_led_linedisp_get_map_type,
+ .update = seg_led_linedisp_update,
+};
+
+static int seg_led_probe(struct platform_device *pdev)
+{
+ struct seg_led_priv *priv;
+ struct device *dev = &pdev->dev;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+
+ priv->segment_gpios = devm_gpiod_get_array(dev, "segment", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->segment_gpios))
+ return PTR_ERR(priv->segment_gpios);
+
+ if (priv->segment_gpios->ndescs < 7)
+ return -EINVAL;
+
+ return linedisp_register(&priv->linedisp, dev, 1, &seg_led_linedisp_ops);
+}
+
+static int seg_led_remove(struct platform_device *pdev)
+{
+ struct seg_led_priv *priv = platform_get_drvdata(pdev);
+
+ cancel_delayed_work_sync(&priv->work);
+ linedisp_unregister(&priv->linedisp);
+
+ return 0;
+}
+
+static const struct of_device_id seg_led_of_match[] = {
+ { .compatible = "gpio-7-segment"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, seg_led_of_match);
+
+static struct platform_driver seg_led_driver = {
+ .probe = seg_led_probe,
+ .remove = seg_led_remove,
+ .driver = {
+ .name = "seg-led-gpio",
+ .of_match_table = seg_led_of_match,
+ },
+};
+module_platform_driver(seg_led_driver);
+
+MODULE_AUTHOR("Chris Packham <chris.packham@alliedtelesis.co.nz>");
+MODULE_DESCRIPTION("7 segment LED driver");
+MODULE_LICENSE("GPL");
Add a driver for a 7-segment LED display. At the moment only one character is supported but it should be possible to expand this to support more characters and/or 14-segment displays in the future. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- Notes: Changes in v5: - Add depends on GPIOLIB || COMPILE_TEST - Validate that we get enough GPIOs Changes in v4: - Fix one more usage of 7 segment - Move ASCII art diagram to DT binding - Include map_to_7segment.h for map_to_seg7() - Use initialiser for values in seg_led_update Changes in v3: - "7 segment" -> "7-Segment" in Kconfig help text - Update after feedback from Andy - Use compatible = "gpio-7-segment" as suggested by Rob Changes in v2: - Rebased on top of auxdisplay/for-next dropping unnecessary code for 7 segment maps. - Update for new linedisp_register() API - Include headers based on actual usage - Allow building as module - Use compatible = "generic-gpio-7seg" to keep checkpatch.pl happy drivers/auxdisplay/Kconfig | 11 +++ drivers/auxdisplay/Makefile | 1 + drivers/auxdisplay/seg-led-gpio.c | 112 ++++++++++++++++++++++++++++++ 3 files changed, 124 insertions(+) create mode 100644 drivers/auxdisplay/seg-led-gpio.c