Message ID | 20240223010328.2826774-4-jthies@google.com |
---|---|
State | New |
Headers | show |
Series | usb: typec: ucsi: Expand SOP/SOP' Discovery | expand |
On Fri, 23 Feb 2024 at 03:04, Jameson Thies <jthies@google.com> wrote: > > Register SOP and SOP' Discover Identity responses with the USB Type-C > Connector Class as partner and cable identities, respectively. Discover > Identity responses are requested from the PPM using the GET_PD_MESSAGE > UCSI command. > > Signed-off-by: Jameson Thies <jthies@google.com> > --- > Tested on v6.6 kernel. GET_PD_MESSAGE responses from the PPM populate > partner and cable identity in sysfs. > redrix-rev3 /sys/class/typec # ls port2-partner/identity/ > cert_stat id_header product product_type_vdo1 product_type_vdo2 > product_type_vdo3 > redrix-rev3 /sys/class/typec # ls port2-cable/identity/ > cert_stat id_header product product_type_vdo1 product_type_vdo2 > product_type_vdo3 > > drivers/usb/typec/ucsi/ucsi.c | 77 +++++++++++++++++++++++++++++++++++ > drivers/usb/typec/ucsi/ucsi.h | 29 +++++++++++++ > 2 files changed, 106 insertions(+) > > diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c > index 15e82f5fab37..6d6443e61faa 100644 > --- a/drivers/usb/typec/ucsi/ucsi.c > +++ b/drivers/usb/typec/ucsi/ucsi.c > @@ -646,6 +646,73 @@ static int ucsi_get_src_pdos(struct ucsi_connector *con) > return ret; > } > > +static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient, struct usb_pd_identity *id) > +{ > + struct ucsi *ucsi = con->ucsi; > + struct ucsi_pd_message_disc_id resp = {}; > + u64 command; > + int ret; > + > + /* > + * Skip identity discovery and registration if UCSI version is less than > + * v2.0. Before v2.0 MESSAGE_IN is 16 bytes which cannot fit a complete > + * 24 byte identity response. Please consider using two commands to retrieve the data. This will allow you to support UCSI 1.x too. > + */ > + if (ucsi->version < UCSI_VERSION_2_0) > + return -EPROTO; > + > + command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) | UCSI_CONNECTOR_NUMBER(con->num); > + command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient); > + /* VDM Header + 6 VDOs (0x1c bytes) without an offset */ > + command |= UCSI_GET_PD_MESSAGE_OFFSET(0); > + command |= UCSI_GET_PD_MESSAGE_BYTES(0x1c); > + command |= UCSI_GET_PD_MESSAGE_TYPE(UCSI_GET_PD_MESSAGE_TYPE_IDENTITY); > + > + ret = ucsi_send_command(ucsi, command, &resp, sizeof(resp)); > + if (ret < 0) { > + dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n", ret); > + return ret; > + } > + > + id->id_header = resp.id_header; > + id->cert_stat = resp.cert_stat; > + id->product = resp.product; > + id->vdo[0] = resp.vdo[0]; > + id->vdo[1] = resp.vdo[1]; > + id->vdo[2] = resp.vdo[2]; > + return 0; > +} > + > +static int ucsi_get_partner_identity(struct ucsi_connector *con) > +{ > + int ret; > + > + ret = ucsi_read_identity(con, UCSI_RECIPIENT_SOP, &con->partner_identity); > + if (ret < 0) > + return ret; > + > + ret = typec_partner_set_identity(con->partner); > + if (ret < 0) > + dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n", ret); > + > + return ret; > +} > + > +static int ucsi_get_cable_identity(struct ucsi_connector *con) > +{ > + int ret; > + > + ret = ucsi_read_identity(con, UCSI_RECIPIENT_SOP_P, &con->cable_identity); > + if (ret < 0) > + return ret; > + > + ret = typec_cable_set_identity(con->cable); > + if (ret < 0) > + dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n", ret); > + > + return ret; > +} > + > static int ucsi_check_altmodes(struct ucsi_connector *con) > { > int ret, num_partner_am; > @@ -754,6 +821,7 @@ static int ucsi_register_cable(struct ucsi_connector *con) > break; > } > > + desc.identity = &con->cable_identity; > desc.active = !!(UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE & con->cable_prop.flags); > desc.pd_revision = UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(con->cable_prop.flags); > > @@ -776,6 +844,7 @@ static void ucsi_unregister_cable(struct ucsi_connector *con) > > typec_unregister_cable(con->cable); > con->cable = NULL; > + memset(&con->cable_identity, 0, sizeof(con->cable_identity)); Nit: I'd probably call memset before setting con->cable to NULL. > } > > static void ucsi_pwr_opmode_change(struct ucsi_connector *con) > @@ -825,6 +894,7 @@ static int ucsi_register_partner(struct ucsi_connector *con) > break; > } > > + desc.identity = &con->partner_identity; > desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD; > desc.pd_revision = UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags); > > @@ -854,6 +924,7 @@ static void ucsi_unregister_partner(struct ucsi_connector *con) > ucsi_unregister_cable(con); > typec_unregister_partner(con->partner); > con->partner = NULL; > + memset(&con->partner_identity, 0, sizeof(con->partner_identity)); And the same here. > } > > static void ucsi_partner_change(struct ucsi_connector *con) > @@ -971,6 +1042,10 @@ static int ucsi_check_cable(struct ucsi_connector *con) > if (ret < 0) > return ret; > > + ret = ucsi_get_cable_identity(con); > + if (ret < 0) > + return ret; > + > return 0; > } > > @@ -1015,6 +1090,7 @@ static void ucsi_handle_connector_change(struct work_struct *work) > ucsi_register_partner(con); > ucsi_partner_task(con, ucsi_check_connection, 1, HZ); > ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ); > + ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ); > ucsi_partner_task(con, ucsi_check_cable, 1, HZ); > > if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) == > @@ -1414,6 +1490,7 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con) > ucsi_register_partner(con); > ucsi_pwr_opmode_change(con); > ucsi_port_psy_changed(con); > + ucsi_get_partner_identity(con); > ucsi_check_cable(con); > } > > diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h > index f0aabef0b7c6..b89fae82e8ce 100644 > --- a/drivers/usb/typec/ucsi/ucsi.h > +++ b/drivers/usb/typec/ucsi/ucsi.h > @@ -106,6 +106,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); > #define UCSI_GET_CABLE_PROPERTY 0x11 > #define UCSI_GET_CONNECTOR_STATUS 0x12 > #define UCSI_GET_ERROR_STATUS 0x13 > +#define UCSI_GET_PD_MESSAGE 0x15 > > #define UCSI_CONNECTOR_NUMBER(_num_) ((u64)(_num_) << 16) > #define UCSI_COMMAND(_cmd_) ((_cmd_) & 0xff) > @@ -159,6 +160,18 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); > #define UCSI_MAX_PDOS (4) > #define UCSI_GET_PDOS_SRC_PDOS ((u64)1 << 34) > > +/* GET_PD_MESSAGE command bits */ > +#define UCSI_GET_PD_MESSAGE_RECIPIENT(_r_) ((u64)(_r_) << 23) > +#define UCSI_GET_PD_MESSAGE_OFFSET(_r_) ((u64)(_r_) << 26) > +#define UCSI_GET_PD_MESSAGE_BYTES(_r_) ((u64)(_r_) << 34) > +#define UCSI_GET_PD_MESSAGE_TYPE(_r_) ((u64)(_r_) << 42) > +#define UCSI_GET_PD_MESSAGE_TYPE_SNK_CAP_EXT 0 > +#define UCSI_GET_PD_MESSAGE_TYPE_SRC_CAP_EXT 1 > +#define UCSI_GET_PD_MESSAGE_TYPE_BAT_CAP 2 > +#define UCSI_GET_PD_MESSAGE_TYPE_BAT_STAT 3 > +#define UCSI_GET_PD_MESSAGE_TYPE_IDENTITY 4 > +#define UCSI_GET_PD_MESSAGE_TYPE_REVISION 5 > + > /* -------------------------------------------------------------------------- */ > > /* Error information returned by PPM in response to GET_ERROR_STATUS command. */ > @@ -338,6 +351,18 @@ struct ucsi_connector_status { > ((get_unaligned_le32(&(_p_)[5]) & GENMASK(16, 1)) >> 1) > } __packed; > > +/* > + * Data structure filled by PPM in response to GET_PD_MESSAGE command with the > + * Response Message Type set to Discover Identity Response. > + */ > +struct ucsi_pd_message_disc_id { > + u32 vdm_header; > + u32 id_header; > + u32 cert_stat; > + u32 product; > + u32 vdo[3]; > +} __packed; > + > /* -------------------------------------------------------------------------- */ > > struct ucsi_debugfs_entry { > @@ -428,6 +453,10 @@ struct ucsi_connector { > struct usb_power_delivery_capabilities *partner_sink_caps; > > struct usb_role_switch *usb_role_sw; > + > + /* USB PD identity */ > + struct usb_pd_identity partner_identity; > + struct usb_pd_identity cable_identity; > }; > > int ucsi_send_command(struct ucsi *ucsi, u64 command, > -- > 2.44.0.rc0.258.g7320e95886-goog >
On Fri, Feb 23, 2024 at 01:03:27AM +0000, Jameson Thies wrote: > Register SOP and SOP' Discover Identity responses with the USB Type-C > Connector Class as partner and cable identities, respectively. Discover > Identity responses are requested from the PPM using the GET_PD_MESSAGE > UCSI command. > > Signed-off-by: Jameson Thies <jthies@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > --- > Tested on v6.6 kernel. GET_PD_MESSAGE responses from the PPM populate > partner and cable identity in sysfs. > redrix-rev3 /sys/class/typec # ls port2-partner/identity/ > cert_stat id_header product product_type_vdo1 product_type_vdo2 > product_type_vdo3 > redrix-rev3 /sys/class/typec # ls port2-cable/identity/ > cert_stat id_header product product_type_vdo1 product_type_vdo2 > product_type_vdo3 > > drivers/usb/typec/ucsi/ucsi.c | 77 +++++++++++++++++++++++++++++++++++ > drivers/usb/typec/ucsi/ucsi.h | 29 +++++++++++++ > 2 files changed, 106 insertions(+) > > diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c > index 15e82f5fab37..6d6443e61faa 100644 > --- a/drivers/usb/typec/ucsi/ucsi.c > +++ b/drivers/usb/typec/ucsi/ucsi.c > @@ -646,6 +646,73 @@ static int ucsi_get_src_pdos(struct ucsi_connector *con) > return ret; > } > > +static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient, struct usb_pd_identity *id) > +{ > + struct ucsi *ucsi = con->ucsi; > + struct ucsi_pd_message_disc_id resp = {}; > + u64 command; > + int ret; > + > + /* > + * Skip identity discovery and registration if UCSI version is less than > + * v2.0. Before v2.0 MESSAGE_IN is 16 bytes which cannot fit a complete > + * 24 byte identity response. > + */ > + if (ucsi->version < UCSI_VERSION_2_0) > + return -EPROTO; > + > + command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) | UCSI_CONNECTOR_NUMBER(con->num); > + command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient); > + /* VDM Header + 6 VDOs (0x1c bytes) without an offset */ > + command |= UCSI_GET_PD_MESSAGE_OFFSET(0); > + command |= UCSI_GET_PD_MESSAGE_BYTES(0x1c); > + command |= UCSI_GET_PD_MESSAGE_TYPE(UCSI_GET_PD_MESSAGE_TYPE_IDENTITY); > + > + ret = ucsi_send_command(ucsi, command, &resp, sizeof(resp)); > + if (ret < 0) { > + dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n", ret); > + return ret; > + } > + > + id->id_header = resp.id_header; > + id->cert_stat = resp.cert_stat; > + id->product = resp.product; > + id->vdo[0] = resp.vdo[0]; > + id->vdo[1] = resp.vdo[1]; > + id->vdo[2] = resp.vdo[2]; > + return 0; > +} > + > +static int ucsi_get_partner_identity(struct ucsi_connector *con) > +{ > + int ret; > + > + ret = ucsi_read_identity(con, UCSI_RECIPIENT_SOP, &con->partner_identity); > + if (ret < 0) > + return ret; > + > + ret = typec_partner_set_identity(con->partner); > + if (ret < 0) > + dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n", ret); > + > + return ret; > +} > + > +static int ucsi_get_cable_identity(struct ucsi_connector *con) > +{ > + int ret; > + > + ret = ucsi_read_identity(con, UCSI_RECIPIENT_SOP_P, &con->cable_identity); > + if (ret < 0) > + return ret; > + > + ret = typec_cable_set_identity(con->cable); > + if (ret < 0) > + dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n", ret); > + > + return ret; > +} > + > static int ucsi_check_altmodes(struct ucsi_connector *con) > { > int ret, num_partner_am; > @@ -754,6 +821,7 @@ static int ucsi_register_cable(struct ucsi_connector *con) > break; > } > > + desc.identity = &con->cable_identity; > desc.active = !!(UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE & con->cable_prop.flags); > desc.pd_revision = UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(con->cable_prop.flags); > > @@ -776,6 +844,7 @@ static void ucsi_unregister_cable(struct ucsi_connector *con) > > typec_unregister_cable(con->cable); > con->cable = NULL; > + memset(&con->cable_identity, 0, sizeof(con->cable_identity)); > } > > static void ucsi_pwr_opmode_change(struct ucsi_connector *con) > @@ -825,6 +894,7 @@ static int ucsi_register_partner(struct ucsi_connector *con) > break; > } > > + desc.identity = &con->partner_identity; > desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD; > desc.pd_revision = UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags); > > @@ -854,6 +924,7 @@ static void ucsi_unregister_partner(struct ucsi_connector *con) > ucsi_unregister_cable(con); > typec_unregister_partner(con->partner); > con->partner = NULL; > + memset(&con->partner_identity, 0, sizeof(con->partner_identity)); > } > > static void ucsi_partner_change(struct ucsi_connector *con) > @@ -971,6 +1042,10 @@ static int ucsi_check_cable(struct ucsi_connector *con) > if (ret < 0) > return ret; > > + ret = ucsi_get_cable_identity(con); > + if (ret < 0) > + return ret; > + > return 0; > } > > @@ -1015,6 +1090,7 @@ static void ucsi_handle_connector_change(struct work_struct *work) > ucsi_register_partner(con); > ucsi_partner_task(con, ucsi_check_connection, 1, HZ); > ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ); > + ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ); > ucsi_partner_task(con, ucsi_check_cable, 1, HZ); > > if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) == > @@ -1414,6 +1490,7 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con) > ucsi_register_partner(con); > ucsi_pwr_opmode_change(con); > ucsi_port_psy_changed(con); > + ucsi_get_partner_identity(con); > ucsi_check_cable(con); > } > > diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h > index f0aabef0b7c6..b89fae82e8ce 100644 > --- a/drivers/usb/typec/ucsi/ucsi.h > +++ b/drivers/usb/typec/ucsi/ucsi.h > @@ -106,6 +106,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); > #define UCSI_GET_CABLE_PROPERTY 0x11 > #define UCSI_GET_CONNECTOR_STATUS 0x12 > #define UCSI_GET_ERROR_STATUS 0x13 > +#define UCSI_GET_PD_MESSAGE 0x15 > > #define UCSI_CONNECTOR_NUMBER(_num_) ((u64)(_num_) << 16) > #define UCSI_COMMAND(_cmd_) ((_cmd_) & 0xff) > @@ -159,6 +160,18 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); > #define UCSI_MAX_PDOS (4) > #define UCSI_GET_PDOS_SRC_PDOS ((u64)1 << 34) > > +/* GET_PD_MESSAGE command bits */ > +#define UCSI_GET_PD_MESSAGE_RECIPIENT(_r_) ((u64)(_r_) << 23) > +#define UCSI_GET_PD_MESSAGE_OFFSET(_r_) ((u64)(_r_) << 26) > +#define UCSI_GET_PD_MESSAGE_BYTES(_r_) ((u64)(_r_) << 34) > +#define UCSI_GET_PD_MESSAGE_TYPE(_r_) ((u64)(_r_) << 42) > +#define UCSI_GET_PD_MESSAGE_TYPE_SNK_CAP_EXT 0 > +#define UCSI_GET_PD_MESSAGE_TYPE_SRC_CAP_EXT 1 > +#define UCSI_GET_PD_MESSAGE_TYPE_BAT_CAP 2 > +#define UCSI_GET_PD_MESSAGE_TYPE_BAT_STAT 3 > +#define UCSI_GET_PD_MESSAGE_TYPE_IDENTITY 4 > +#define UCSI_GET_PD_MESSAGE_TYPE_REVISION 5 > + > /* -------------------------------------------------------------------------- */ > > /* Error information returned by PPM in response to GET_ERROR_STATUS command. */ > @@ -338,6 +351,18 @@ struct ucsi_connector_status { > ((get_unaligned_le32(&(_p_)[5]) & GENMASK(16, 1)) >> 1) > } __packed; > > +/* > + * Data structure filled by PPM in response to GET_PD_MESSAGE command with the > + * Response Message Type set to Discover Identity Response. > + */ > +struct ucsi_pd_message_disc_id { > + u32 vdm_header; > + u32 id_header; > + u32 cert_stat; > + u32 product; > + u32 vdo[3]; > +} __packed; > + > /* -------------------------------------------------------------------------- */ > > struct ucsi_debugfs_entry { > @@ -428,6 +453,10 @@ struct ucsi_connector { > struct usb_power_delivery_capabilities *partner_sink_caps; > > struct usb_role_switch *usb_role_sw; > + > + /* USB PD identity */ > + struct usb_pd_identity partner_identity; > + struct usb_pd_identity cable_identity; > }; > > int ucsi_send_command(struct ucsi *ucsi, u64 command, > -- > 2.44.0.rc0.258.g7320e95886-goog
On Thu, Feb 22, 2024 at 5:04 PM Jameson Thies <jthies@google.com> wrote: > > Register SOP and SOP' Discover Identity responses with the USB Type-C > Connector Class as partner and cable identities, respectively. Discover > Identity responses are requested from the PPM using the GET_PD_MESSAGE > UCSI command. > > Signed-off-by: Jameson Thies <jthies@google.com> I've reviewed this internally already [1], and it looks good to me: Reviewed-by: Prashant Malani <pmalani@chromium.org> [1] https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/5260256
> Please consider using two commands to retrieve the data. This will > allow you to support UCSI 1.x too. > Nit: I'd probably call memset before setting con->cable to NULL. > And the same here. Thanks for your feedback. I'll apply these changes in a v2 version of this series.
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index 15e82f5fab37..6d6443e61faa 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -646,6 +646,73 @@ static int ucsi_get_src_pdos(struct ucsi_connector *con) return ret; } +static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient, struct usb_pd_identity *id) +{ + struct ucsi *ucsi = con->ucsi; + struct ucsi_pd_message_disc_id resp = {}; + u64 command; + int ret; + + /* + * Skip identity discovery and registration if UCSI version is less than + * v2.0. Before v2.0 MESSAGE_IN is 16 bytes which cannot fit a complete + * 24 byte identity response. + */ + if (ucsi->version < UCSI_VERSION_2_0) + return -EPROTO; + + command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) | UCSI_CONNECTOR_NUMBER(con->num); + command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient); + /* VDM Header + 6 VDOs (0x1c bytes) without an offset */ + command |= UCSI_GET_PD_MESSAGE_OFFSET(0); + command |= UCSI_GET_PD_MESSAGE_BYTES(0x1c); + command |= UCSI_GET_PD_MESSAGE_TYPE(UCSI_GET_PD_MESSAGE_TYPE_IDENTITY); + + ret = ucsi_send_command(ucsi, command, &resp, sizeof(resp)); + if (ret < 0) { + dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n", ret); + return ret; + } + + id->id_header = resp.id_header; + id->cert_stat = resp.cert_stat; + id->product = resp.product; + id->vdo[0] = resp.vdo[0]; + id->vdo[1] = resp.vdo[1]; + id->vdo[2] = resp.vdo[2]; + return 0; +} + +static int ucsi_get_partner_identity(struct ucsi_connector *con) +{ + int ret; + + ret = ucsi_read_identity(con, UCSI_RECIPIENT_SOP, &con->partner_identity); + if (ret < 0) + return ret; + + ret = typec_partner_set_identity(con->partner); + if (ret < 0) + dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n", ret); + + return ret; +} + +static int ucsi_get_cable_identity(struct ucsi_connector *con) +{ + int ret; + + ret = ucsi_read_identity(con, UCSI_RECIPIENT_SOP_P, &con->cable_identity); + if (ret < 0) + return ret; + + ret = typec_cable_set_identity(con->cable); + if (ret < 0) + dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n", ret); + + return ret; +} + static int ucsi_check_altmodes(struct ucsi_connector *con) { int ret, num_partner_am; @@ -754,6 +821,7 @@ static int ucsi_register_cable(struct ucsi_connector *con) break; } + desc.identity = &con->cable_identity; desc.active = !!(UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE & con->cable_prop.flags); desc.pd_revision = UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(con->cable_prop.flags); @@ -776,6 +844,7 @@ static void ucsi_unregister_cable(struct ucsi_connector *con) typec_unregister_cable(con->cable); con->cable = NULL; + memset(&con->cable_identity, 0, sizeof(con->cable_identity)); } static void ucsi_pwr_opmode_change(struct ucsi_connector *con) @@ -825,6 +894,7 @@ static int ucsi_register_partner(struct ucsi_connector *con) break; } + desc.identity = &con->partner_identity; desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD; desc.pd_revision = UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags); @@ -854,6 +924,7 @@ static void ucsi_unregister_partner(struct ucsi_connector *con) ucsi_unregister_cable(con); typec_unregister_partner(con->partner); con->partner = NULL; + memset(&con->partner_identity, 0, sizeof(con->partner_identity)); } static void ucsi_partner_change(struct ucsi_connector *con) @@ -971,6 +1042,10 @@ static int ucsi_check_cable(struct ucsi_connector *con) if (ret < 0) return ret; + ret = ucsi_get_cable_identity(con); + if (ret < 0) + return ret; + return 0; } @@ -1015,6 +1090,7 @@ static void ucsi_handle_connector_change(struct work_struct *work) ucsi_register_partner(con); ucsi_partner_task(con, ucsi_check_connection, 1, HZ); ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ); + ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ); ucsi_partner_task(con, ucsi_check_cable, 1, HZ); if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) == @@ -1414,6 +1490,7 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con) ucsi_register_partner(con); ucsi_pwr_opmode_change(con); ucsi_port_psy_changed(con); + ucsi_get_partner_identity(con); ucsi_check_cable(con); } diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h index f0aabef0b7c6..b89fae82e8ce 100644 --- a/drivers/usb/typec/ucsi/ucsi.h +++ b/drivers/usb/typec/ucsi/ucsi.h @@ -106,6 +106,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); #define UCSI_GET_CABLE_PROPERTY 0x11 #define UCSI_GET_CONNECTOR_STATUS 0x12 #define UCSI_GET_ERROR_STATUS 0x13 +#define UCSI_GET_PD_MESSAGE 0x15 #define UCSI_CONNECTOR_NUMBER(_num_) ((u64)(_num_) << 16) #define UCSI_COMMAND(_cmd_) ((_cmd_) & 0xff) @@ -159,6 +160,18 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); #define UCSI_MAX_PDOS (4) #define UCSI_GET_PDOS_SRC_PDOS ((u64)1 << 34) +/* GET_PD_MESSAGE command bits */ +#define UCSI_GET_PD_MESSAGE_RECIPIENT(_r_) ((u64)(_r_) << 23) +#define UCSI_GET_PD_MESSAGE_OFFSET(_r_) ((u64)(_r_) << 26) +#define UCSI_GET_PD_MESSAGE_BYTES(_r_) ((u64)(_r_) << 34) +#define UCSI_GET_PD_MESSAGE_TYPE(_r_) ((u64)(_r_) << 42) +#define UCSI_GET_PD_MESSAGE_TYPE_SNK_CAP_EXT 0 +#define UCSI_GET_PD_MESSAGE_TYPE_SRC_CAP_EXT 1 +#define UCSI_GET_PD_MESSAGE_TYPE_BAT_CAP 2 +#define UCSI_GET_PD_MESSAGE_TYPE_BAT_STAT 3 +#define UCSI_GET_PD_MESSAGE_TYPE_IDENTITY 4 +#define UCSI_GET_PD_MESSAGE_TYPE_REVISION 5 + /* -------------------------------------------------------------------------- */ /* Error information returned by PPM in response to GET_ERROR_STATUS command. */ @@ -338,6 +351,18 @@ struct ucsi_connector_status { ((get_unaligned_le32(&(_p_)[5]) & GENMASK(16, 1)) >> 1) } __packed; +/* + * Data structure filled by PPM in response to GET_PD_MESSAGE command with the + * Response Message Type set to Discover Identity Response. + */ +struct ucsi_pd_message_disc_id { + u32 vdm_header; + u32 id_header; + u32 cert_stat; + u32 product; + u32 vdo[3]; +} __packed; + /* -------------------------------------------------------------------------- */ struct ucsi_debugfs_entry { @@ -428,6 +453,10 @@ struct ucsi_connector { struct usb_power_delivery_capabilities *partner_sink_caps; struct usb_role_switch *usb_role_sw; + + /* USB PD identity */ + struct usb_pd_identity partner_identity; + struct usb_pd_identity cable_identity; }; int ucsi_send_command(struct ucsi *ucsi, u64 command,
Register SOP and SOP' Discover Identity responses with the USB Type-C Connector Class as partner and cable identities, respectively. Discover Identity responses are requested from the PPM using the GET_PD_MESSAGE UCSI command. Signed-off-by: Jameson Thies <jthies@google.com> --- Tested on v6.6 kernel. GET_PD_MESSAGE responses from the PPM populate partner and cable identity in sysfs. redrix-rev3 /sys/class/typec # ls port2-partner/identity/ cert_stat id_header product product_type_vdo1 product_type_vdo2 product_type_vdo3 redrix-rev3 /sys/class/typec # ls port2-cable/identity/ cert_stat id_header product product_type_vdo1 product_type_vdo2 product_type_vdo3 drivers/usb/typec/ucsi/ucsi.c | 77 +++++++++++++++++++++++++++++++++++ drivers/usb/typec/ucsi/ucsi.h | 29 +++++++++++++ 2 files changed, 106 insertions(+)