[1/3] mmc: dw_mmc: add support for hi3798mv200

Message ID	20240216-b4-mmc-hi3798mv200-v1-1-7d46db845ae6@outlook.com
State	Superseded
Headers	show Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 36EFA13475D; Thu, 15 Feb 2024 17:46:42 +0000 (UTC) From: Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@kernel.org> Date: Fri, 16 Feb 2024 01:46:42 +0800 Subject: [PATCH 1/3] mmc: dw_mmc: add support for hi3798mv200 Precedence: bulk MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20240216-b4-mmc-hi3798mv200-v1-1-7d46db845ae6@outlook.com> References: <20240216-b4-mmc-hi3798mv200-v1-0-7d46db845ae6@outlook.com> In-Reply-To: <20240216-b4-mmc-hi3798mv200-v1-0-7d46db845ae6@outlook.com> To: Ulf Hansson <ulf.hansson@linaro.org>, Jaehoon Chung <jh80.chung@samsung.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: Igor Opaniuk <igor.opaniuk@linaro.org>, tianshuliang <tianshuliang@hisilicon.com>, David Yang <mmyangfl@gmail.com>, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, devicetree@vger.kernel.org, Yang Xiwen <forbidden405@outlook.com> Reply-To: <forbidden405@outlook.com>
Series	mmc: add hi3798mv200 specific extensions of DWMMC \| expand [0/3] mmc: add hi3798mv200 specific extensions of DWMMC [1/3] mmc: dw_mmc: add support for hi3798mv200 [2/3] dt-bindings: mmc: dw-mshc-hi3798cv200: convert to YAML [3/3] dt-bindings: mmc: dw-mshc-hi3798cv200: rename to dw-mshc-histb

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 81f2c4e05287..aebc587f77a7 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -798,6 +798,15 @@ config MMC_DW_HI3798CV200 Synopsys DesignWare Memory Card Interface driver. Select this option for platforms based on HiSilicon Hi3798CV200 SoC. +config MMC_DW_HI3798MV200 + tristate "Hi3798MV200 specific extensions for Synopsys DW Memory Card Interface" + depends on MMC_DW + select MMC_DW_PLTFM + help + This selects support for HiSilicon Hi3798MV200 SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. Select this option + for platforms based on HiSilicon Hi3798MV200 SoC. + config MMC_DW_K3 tristate "K3 specific extensions for Synopsys DW Memory Card Interface" depends on MMC_DW diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index d0be4465f3ec..f53f86d200ac 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o obj-$(CONFIG_MMC_DW_BLUEFIELD) += dw_mmc-bluefield.o obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o obj-$(CONFIG_MMC_DW_HI3798CV200) += dw_mmc-hi3798cv200.o +obj-$(CONFIG_MMC_DW_HI3798MV200) += dw_mmc-hi3798mv200.o obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o obj-$(CONFIG_MMC_DW_ROCKCHIP) += dw_mmc-rockchip.o diff --git a/drivers/mmc/host/dw_mmc-hi3798mv200.c b/drivers/mmc/host/dw_mmc-hi3798mv200.c new file mode 100644 index 000000000000..ebbeccecf5b7 --- /dev/null +++ b/drivers/mmc/host/dw_mmc-hi3798mv200.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Modified from dw_mmc-hi3798cv200.c + * + * Copyright (c) 2024 Yang Xiwen <forbidden405@outlook.com> + * Copyright (c) 2018 HiSilicon Technologies Co., Ltd. + */ + +#include <linux/clk.h> +#include <linux/mfd/syscon.h> +#include <linux/mmc/host.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "dw_mmc.h" +#include "dw_mmc-pltfm.h" + +#define SDMMC_TUNING_CTRL 0x118 +#define SDMMC_TUNING_FIND_EDGE BIT(5) + +#define ALL_INT_CLR 0x1ffff + +/* DLL ctrl reg */ +#define SAP_DLL_CTRL_DLLMODE BIT(16) + +struct dw_mci_hi3798mv200_priv { + struct clk *sample_clk; + struct clk *drive_clk; + struct regmap *sap_dll_reg; + struct mmc_clk_phase_map phase_map; +}; + +static void dw_mci_hi3798mv200_set_ios(struct dw_mci *host, struct mmc_ios *ios) +{ + struct dw_mci_hi3798mv200_priv *priv = host->priv; + struct mmc_clk_phase phase = priv->phase_map.phase[ios->timing]; + u32 val; + + val = mci_readl(host, ENABLE_SHIFT); + if (ios->timing == MMC_TIMING_MMC_DDR52 + || ios->timing == MMC_TIMING_UHS_DDR50) + val |= SDMMC_ENABLE_PHASE; + else + val &= ~SDMMC_ENABLE_PHASE; + mci_writel(host, ENABLE_SHIFT, val); + + val = mci_readl(host, DDR_REG); + if (ios->timing == MMC_TIMING_MMC_HS400) + val |= SDMMC_DDR_HS400; + else + val &= ~SDMMC_DDR_HS400; + mci_writel(host, DDR_REG, val); + + if (clk_set_rate(host->ciu_clk, ios->clock)) + dev_warn(host->dev, "Failed to set rate to %u\n", ios->clock); + else + // CLK_MUX_ROUND_NEAREST is enabled for this clock + // The actual clock rate is not what we setted, but a rounded value + // so we should get the rate once again + host->bus_hz = clk_get_rate(host->ciu_clk); + + if (phase.valid) { + clk_set_phase(priv->drive_clk, phase.out_deg); + clk_set_phase(priv->sample_clk, phase.in_deg); + } else { + dev_warn(host->dev, + "The phase entry for timing mode %d is missing in device tree.\n", + ios->timing); + } +} + +static inline int dw_mci_hi3798mv200_enable_tuning(struct dw_mci_slot *slot) +{ + struct dw_mci_hi3798mv200_priv *priv = slot->host->priv; + struct regmap *dll_reg = priv->sap_dll_reg; + + return regmap_clear_bits(dll_reg, 0, SAP_DLL_CTRL_DLLMODE); +} + +static inline int dw_mci_hi3798mv200_disable_tuning(struct dw_mci_slot *slot) +{ + struct dw_mci_hi3798mv200_priv *priv = slot->host->priv; + struct regmap *dll_reg = priv->sap_dll_reg; + + return regmap_set_bits(dll_reg, 0, SAP_DLL_CTRL_DLLMODE); +} + +static int dw_mci_hi3798mv200_execute_tuning_mix_mode(struct dw_mci_slot *slot, + u32 opcode) +{ + static const int degrees[] = { 0, 45, 90, 135, 180, 225, 270, 315 }; + struct dw_mci *host = slot->host; + struct dw_mci_hi3798mv200_priv *priv = host->priv; + int raise_point = -1, fall_point = -1; + int err, prev_err = -1; + int found = 0; + int regval; + int i; + int ret; + + // enable tuning + ret = dw_mci_hi3798mv200_enable_tuning(slot); + if (ret < 0) + return ret; + for (i = 0; i < ARRAY_SIZE(degrees); i++) { + clk_set_phase(priv->sample_clk, degrees[i]); + mci_writel(host, RINTSTS, ALL_INT_CLR); + + err = mmc_send_tuning(slot->mmc, opcode, NULL); + if (!err) { + regval = mci_readl(host, TUNING_CTRL); + if (regval & SDMMC_TUNING_FIND_EDGE) + err = 1; + else + found = 1; + }; + + if (i > 0) { + if (err && !prev_err) + fall_point = i - 1; + if (!err && prev_err) + raise_point = i; + } + + if (raise_point != -1 && fall_point != -1) + goto tuning_out; + + prev_err = err; + err = 0; + } + +tuning_out: + ret = dw_mci_hi3798mv200_disable_tuning(slot); + if (ret < 0) + return ret; + if (found) { + if (raise_point == -1) + raise_point = 0; + if (fall_point == -1) + fall_point = ARRAY_SIZE(degrees) - 1; + if (fall_point < raise_point) { + if ((raise_point + fall_point) > + (ARRAY_SIZE(degrees) - 1)) + i = fall_point / 2; + else + i = (raise_point + ARRAY_SIZE(degrees) - 1) / 2; + } else { + i = (raise_point + fall_point) / 2; + } + + // use the same phase table for both HS200 and HS400 + priv->phase_map.phase[MMC_TIMING_MMC_HS200].in_deg = degrees[i]; + priv->phase_map.phase[MMC_TIMING_MMC_HS400].in_deg = degrees[i]; + + clk_set_phase(priv->sample_clk, degrees[i]); + dev_dbg(host->dev, "Tuning clk_sample[%d, %d], set[%d]\n", + raise_point, fall_point, degrees[i]); + } else { + dev_err(host->dev, "No valid clk_sample shift! use default\n"); + err = -EINVAL; + } + + mci_writel(host, RINTSTS, ALL_INT_CLR); + return err; +} + +static int dw_mci_hi3798mv200_init(struct dw_mci *host) +{ + struct dw_mci_hi3798mv200_priv *priv; + struct device_node *np = host->dev->of_node; + + priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mmc_of_parse_clk_phase(host->dev, &priv->phase_map); + + priv->sample_clk = devm_clk_get_enabled(host->dev, "ciu-sample"); + if (IS_ERR(priv->sample_clk)) { + dev_err(host->dev, "failed to get enabled ciu-sample clock\n"); + return PTR_ERR(priv->sample_clk); + } + + priv->drive_clk = devm_clk_get_enabled(host->dev, "ciu-drive"); + if (IS_ERR(priv->drive_clk)) { + dev_err(host->dev, "failed to get enabled ciu-drive clock\n"); + return PTR_ERR(priv->drive_clk); + } + + priv->sap_dll_reg = syscon_regmap_lookup_by_phandle(np, "hisilicon,sap-dll-reg"); + if (IS_ERR(priv->sap_dll_reg)) { + dev_err(host->dev, "failed to get sap-dll-reg\n"); + return PTR_ERR(priv->sap_dll_reg); + } + + host->priv = priv; + return 0; +} + +static const struct dw_mci_drv_data hi3798mv200_data = { + .common_caps = MMC_CAP_CMD23, + .init = dw_mci_hi3798mv200_init, + .set_ios = dw_mci_hi3798mv200_set_ios, + .execute_tuning = dw_mci_hi3798mv200_execute_tuning_mix_mode, +}; + +static const struct of_device_id dw_mci_hi3798mv200_match[] = { + { .compatible = "hisilicon,hi3798mv200-dw-mshc" }, + {}, +}; + +static int dw_mci_hi3798mv200_probe(struct platform_device *pdev) +{ + return dw_mci_pltfm_register(pdev, &hi3798mv200_data); +} + +static void dw_mci_hi3798mv200_remove(struct platform_device *pdev) +{ + dw_mci_pltfm_remove(pdev); +} + +MODULE_DEVICE_TABLE(of, dw_mci_hi3798mv200_match); +static struct platform_driver dw_mci_hi3798mv200_driver = { + .probe = dw_mci_hi3798mv200_probe, + .remove_new = dw_mci_hi3798mv200_remove, + .driver = { + .name = "dwmmc_hi3798mv200", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .of_match_table = dw_mci_hi3798mv200_match, + }, +}; +module_platform_driver(dw_mci_hi3798mv200_driver); + +MODULE_DESCRIPTION("HiSilicon Hi3798MV200 Specific DW-MSHC Driver Extension"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:dwmmc_hi3798mv200");

[1/3] mmc: dw_mmc: add support for hi3798mv200

Commit Message

Comments

Patch