@@ -30,6 +30,7 @@
#include "atomisp_common.h"
#include "atomisp_compat.h"
#include "atomisp_fops.h"
+#include "atomisp_ioctl.h"
#include "atomisp_internal.h"
const struct atomisp_in_fmt_conv atomisp_in_fmt_conv[] = {
@@ -634,8 +635,59 @@ static void isp_subdev_init_params(struct atomisp_sub_device *asd)
}
/* media operations */
+static int atomisp_link_setup(struct media_entity *entity,
+ const struct media_pad *local,
+ const struct media_pad *remote, u32 flags)
+{
+ struct v4l2_subdev *sd = container_of(entity, struct v4l2_subdev,
+ entity);
+ struct atomisp_sub_device *asd = v4l2_get_subdevdata(sd);
+ struct atomisp_device *isp = asd->isp;
+ int i, csi_idx, ret;
+
+ /* ISP's source is immutable */
+ if (local != &asd->pads[ATOMISP_SUBDEV_PAD_SINK]) {
+ v4l2_err(sd, "Error pad %d does not support changing flags\n",
+ local->index);
+ return -EINVAL;
+ }
+
+ for (csi_idx = 0; csi_idx < ATOMISP_CAMERA_NR_PORTS; csi_idx++) {
+ if (&isp->csi2_port[csi_idx].pads[CSI2_PAD_SOURCE] == remote)
+ break;
+ }
+
+ if (csi_idx == ATOMISP_CAMERA_NR_PORTS) {
+ v4l2_err(sd, "Error cannot find CSI receiver for remote pad\n");
+ return -EINVAL;
+ }
+
+ /* Ignore disables, input_curr should only be updated on enables */
+ if (!(flags & MEDIA_LNK_FL_ENABLED))
+ return 0;
+
+ for (i = 0; i < isp->input_cnt; i++) {
+ if (isp->inputs[i].camera == isp->sensor_subdevs[csi_idx])
+ break;
+ }
+
+ if (i == isp->input_cnt) {
+ v4l2_err(sd, "Error no sensor for CSI receiver %d\n", csi_idx);
+ return -EINVAL;
+ }
+
+ mutex_lock(&isp->mutex);
+ ret = atomisp_pipe_check(&asd->video_out, true);
+ if (ret == 0)
+ asd->input_curr = i;
+ mutex_unlock(&isp->mutex);
+
+ return ret;
+}
+
static const struct media_entity_operations isp_subdev_media_ops = {
.link_validate = v4l2_subdev_link_validate,
+ .link_setup = atomisp_link_setup,
/* .set_power = v4l2_subdev_set_power, */
};
The atomisp driver's Android heritage makes it weird in that even though it uses MC + subdev-s it is designed to primarily be controlled through its /dev/video# node. It implements s_input on /dev/video# to select which sensor to use, while ignoring setup_link calls to enable a link to another sensor. Add support for selecting the active sensor the MC way by adding setup_link support. The implementation is a bit convoluted due to the atomisp driver's heritage. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- .../media/atomisp/pci/atomisp_subdev.c | 52 +++++++++++++++++++ 1 file changed, 52 insertions(+)