Message ID | 20240129174703.1175426-8-andre.draszik@linaro.org |
---|---|
State | Superseded |
Headers | show |
Series | gs101 oriole: peripheral block 1 (peric1) and i2c12 support | expand |
On Mon, Jan 29, 2024 at 11:47 AM André Draszik <andre.draszik@linaro.org> wrote: > > This bus has three USB-related devices attached to it: > 0x25: Maxim 77759 Type-C port controller > 0x35: Maxim 20339EWB Surge protection IC > 0x36: Maxim 77759 Fuel gauge > 0x57: NXP PCA9468 Battery charger > 0x66: Maxim 77759 PMIC > 0x69: Maxim 77759 Charger > where the Maxim 77759 has multiple i2c slave addresses. > > These don't have (upstream) Linux drivers yet, but nevertheless we can > enable the bus so as to allow working on them (and to make i2cdetect / > i2cdump / etc. work). > > Signed-off-by: André Draszik <andre.draszik@linaro.org> > Reviewed-by: Peter Griffin <peter.griffin@linaro.org> > > --- Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> > v2: > * add short summary of devices attached to this bus & add TODO > * collect Reviewed-by: tags > --- > arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts > index cb4d17339b6b..6ccade2c8cb4 100644 > --- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts > +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts > @@ -72,6 +72,11 @@ eeprom: eeprom@50 { > }; > }; > > +&hsi2c_12 { > + status = "okay"; > + /* TODO: add the devices once drivers exist */ > +}; > + > &pinctrl_far_alive { > key_voldown: key-voldown-pins { > samsung,pins = "gpa7-3"; > @@ -113,6 +118,11 @@ &usi8 { > status = "okay"; > }; > > +&usi12 { > + samsung,mode = <USI_V2_I2C>; > + status = "okay"; > +}; > + > &watchdog_cl0 { > timeout-sec = <30>; > status = "okay"; > -- > 2.43.0.429.g432eaa2c6b-goog >
On 1/29/24 17:46, André Draszik wrote: > This bus has three USB-related devices attached to it: > 0x25: Maxim 77759 Type-C port controller > 0x35: Maxim 20339EWB Surge protection IC > 0x36: Maxim 77759 Fuel gauge > 0x57: NXP PCA9468 Battery charger > 0x66: Maxim 77759 PMIC > 0x69: Maxim 77759 Charger > where the Maxim 77759 has multiple i2c slave addresses. > > These don't have (upstream) Linux drivers yet, but nevertheless we can > enable the bus so as to allow working on them (and to make i2cdetect / > i2cdump / etc. work). > > Signed-off-by: André Draszik <andre.draszik@linaro.org> > Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> > > --- > v2: > * add short summary of devices attached to this bus & add TODO > * collect Reviewed-by: tags > --- > arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts > index cb4d17339b6b..6ccade2c8cb4 100644 > --- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts > +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts > @@ -72,6 +72,11 @@ eeprom: eeprom@50 { > }; > }; > > +&hsi2c_12 { > + status = "okay"; > + /* TODO: add the devices once drivers exist */ > +}; > + > &pinctrl_far_alive { > key_voldown: key-voldown-pins { > samsung,pins = "gpa7-3"; > @@ -113,6 +118,11 @@ &usi8 { > status = "okay"; > }; > > +&usi12 { > + samsung,mode = <USI_V2_I2C>; > + status = "okay"; > +}; > + > &watchdog_cl0 { > timeout-sec = <30>; > status = "okay";
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts index cb4d17339b6b..6ccade2c8cb4 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts @@ -72,6 +72,11 @@ eeprom: eeprom@50 { }; }; +&hsi2c_12 { + status = "okay"; + /* TODO: add the devices once drivers exist */ +}; + &pinctrl_far_alive { key_voldown: key-voldown-pins { samsung,pins = "gpa7-3"; @@ -113,6 +118,11 @@ &usi8 { status = "okay"; }; +&usi12 { + samsung,mode = <USI_V2_I2C>; + status = "okay"; +}; + &watchdog_cl0 { timeout-sec = <30>; status = "okay";