Message ID | 20240123-sa8295p-gpu-v3-0-d5b4474c8f33@quicinc.com |
---|---|
Headers | show |
Series | arm64: dts: qcom: sa8295p: Enable GPU | expand |
On Thu, Jan 25, 2024 at 08:39:15AM +0100, Krzysztof Kozlowski wrote: > On 24/01/2024 22:21, Bjorn Andersson wrote: > > On Wed, Jan 24, 2024 at 07:31:34AM +0100, Krzysztof Kozlowski wrote: > >> On 24/01/2024 05:25, Bjorn Andersson wrote: > >>> +# Allow either power-domains or vdd-gfx-supply, not both > >>> +oneOf: > >>> + - required: > >>> + - power-domains > >>> + - required: > >>> + - vdd-gfx-supply > >>> + - not: > >>> + anyOf: > >>> + - required: > >>> + - power-domains > >>> + - required: > >>> + - vdd-gfx-supply > >> > >> I don't fully understand what you want to achieve here. If only "allow > >> either", so not a "require either", then simpler: > >> > >> https://lore.kernel.org/all/20230118163208.GA117919-robh@kernel.org/ > >> > > > > As discussed in v2, power-domains is currently an optional property in > > this binding and I'm adding vdd-gfx-supply as an alternative to that. > > > > Then go with Rob's syntax - not:required: Much easier code. > I looked at it, but was not able to understand that it expressed my desired result. Now I do, and I agree with you, so will update it. Thanks, Bjorn
Due to the different PMIC configuration found in the SA8295P platform, compared to SC8280XP, the VDD_GFX pads are supplied by an dedicated MAX20411 LDO. Support for expressing the regulator supply is added to the binding, the support for enabling the parent supply for GX is added, the missing gfx.lvl power-domain is dropped, and the DeviceTree is wired up to enable the GPU in this configuration. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> --- Changes in v3: - Removed one unnecessary empty line in DT node - Rebased series to v6.8-rc1 - Link to v2: https://lore.kernel.org/r/20231220-sa8295p-gpu-v2-0-4763246b72c0@quicinc.com Changes in v2: - Made gpucc binding accept either power-domain or vdd-gfx-supply - Updated comment in gdsc_gx_do_nothing_enable() - Added a comment for the /delete-property/ power-domains - Fixed node and property sort order in dts - Switched zap firmware to use mbn file - Link to v1: https://lore.kernel.org/r/20231220-sa8295p-gpu-v1-0-d8cdf2257f97@quicinc.com --- Bjorn Andersson (8): dt-bindings: clock: qcom: Allow VDD_GFX supply to GX clk: qcom: gdsc: Enable supply reglator in GPU GX handler clk: qcom: gpucc-sc8280xp: Add external supply for GX gdsc soc: qcom: rpmhpd: Drop SA8540P gfx.lvl arm64: dts: qcom: sa8540p: Drop gfx.lvl as power-domain for gpucc arm64: dts: qcom: sa8295p-adp: add max20411 arm64: dts: qcom: sa8295p-adp: Enable GPU arm64: defconfig: Enable MAX20411 regulator driver .../devicetree/bindings/clock/qcom,gpucc.yaml | 16 +++++ arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 68 ++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sa8540p.dtsi | 3 + arch/arm64/configs/defconfig | 1 + drivers/clk/qcom/gdsc.c | 12 +++- drivers/clk/qcom/gpucc-sc8280xp.c | 1 + drivers/pmdomain/qcom/rpmhpd.c | 1 - 7 files changed, 99 insertions(+), 3 deletions(-) --- base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d change-id: 20231220-sa8295p-gpu-51c5f343e3ec Best regards,