Message ID | 20240122092225.2083191-2-peng.fan@oss.nxp.com |
---|---|
State | New |
Headers | show |
Series | None | expand |
Hi Peng, On 24-01-22, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@nxp.com> > > To i.MX95 System counter module, we use Read register space to get > the counter, not the Control register space to get the counter, because > System Manager firmware not allow Linux to read Control register space. > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- > drivers/clocksource/timer-imx-sysctr.c | 16 +++++++++++++--- > 1 file changed, 13 insertions(+), 3 deletions(-) > > diff --git a/drivers/clocksource/timer-imx-sysctr.c b/drivers/clocksource/timer-imx-sysctr.c > index 5a7a951c4efc..3d3bc16388ed 100644 > --- a/drivers/clocksource/timer-imx-sysctr.c > +++ b/drivers/clocksource/timer-imx-sysctr.c > @@ -8,9 +8,12 @@ > #include "timer-of.h" > > #define CMP_OFFSET 0x10000 > +#define RD_OFFSET 0x20000 > > #define CNTCV_LO 0x8 > #define CNTCV_HI 0xc > +#define CNTCV_LO_IMX95 (RD_OFFSET + 0x8) > +#define CNTCV_HI_IMX95 (RD_OFFSET + 0xc) > #define CMPCV_LO (CMP_OFFSET + 0x20) > #define CMPCV_HI (CMP_OFFSET + 0x24) > #define CMPCR (CMP_OFFSET + 0x2c) > @@ -22,6 +25,8 @@ > > static void __iomem *sys_ctr_base __ro_after_init; > static u32 cmpcr __ro_after_init; > +static u32 cntcv_hi = CNTCV_HI; > +static u32 cntcv_lo = CNTCV_LO; > > static void sysctr_timer_enable(bool enable) > { > @@ -43,9 +48,9 @@ static inline u64 sysctr_read_counter(void) > u32 cnt_hi, tmp_hi, cnt_lo; > > do { > - cnt_hi = readl_relaxed(sys_ctr_base + CNTCV_HI); > - cnt_lo = readl_relaxed(sys_ctr_base + CNTCV_LO); > - tmp_hi = readl_relaxed(sys_ctr_base + CNTCV_HI); > + cnt_hi = readl_relaxed(sys_ctr_base + cntcv_hi); > + cnt_lo = readl_relaxed(sys_ctr_base + cntcv_lo); > + tmp_hi = readl_relaxed(sys_ctr_base + cntcv_hi); > } while (tmp_hi != cnt_hi); > > return ((u64) cnt_hi << 32) | cnt_lo; > @@ -139,6 +144,11 @@ static int __init sysctr_timer_init(struct device_node *np) > to_sysctr.of_clk.rate /= SYS_CTR_CLK_DIV; > } > > + if (of_device_is_compatible(np, "nxp,imx95-sysctr-timer")) { > + cntcv_hi = CNTCV_HI_IMX95; > + cntcv_lo = CNTCV_LO_IMX95; > + } I'm not a fan of this, since TIMER_OF_DECLARE() can do the compat check. So instead of using fallback bindings just use the correct binding within the dts file. Also I'm not a fan of this clobal variable setting albeit there is just one instance _yet_ we really should instead rework this driver a bit and instead provide a i.MX95 specific sysctr_read_counter() function. This is clearly a bit more work but IMO a cleaner approach. Also afterwards once you add i.MX9x which is again a bit different would gain from this work. Regards, Marco > + > sys_ctr_base = timer_of_base(&to_sysctr); > cmpcr = readl(sys_ctr_base + CMPCR); > cmpcr &= ~SYS_CTR_EN; > -- > 2.37.1 > > >
diff --git a/drivers/clocksource/timer-imx-sysctr.c b/drivers/clocksource/timer-imx-sysctr.c index 5a7a951c4efc..3d3bc16388ed 100644 --- a/drivers/clocksource/timer-imx-sysctr.c +++ b/drivers/clocksource/timer-imx-sysctr.c @@ -8,9 +8,12 @@ #include "timer-of.h" #define CMP_OFFSET 0x10000 +#define RD_OFFSET 0x20000 #define CNTCV_LO 0x8 #define CNTCV_HI 0xc +#define CNTCV_LO_IMX95 (RD_OFFSET + 0x8) +#define CNTCV_HI_IMX95 (RD_OFFSET + 0xc) #define CMPCV_LO (CMP_OFFSET + 0x20) #define CMPCV_HI (CMP_OFFSET + 0x24) #define CMPCR (CMP_OFFSET + 0x2c) @@ -22,6 +25,8 @@ static void __iomem *sys_ctr_base __ro_after_init; static u32 cmpcr __ro_after_init; +static u32 cntcv_hi = CNTCV_HI; +static u32 cntcv_lo = CNTCV_LO; static void sysctr_timer_enable(bool enable) { @@ -43,9 +48,9 @@ static inline u64 sysctr_read_counter(void) u32 cnt_hi, tmp_hi, cnt_lo; do { - cnt_hi = readl_relaxed(sys_ctr_base + CNTCV_HI); - cnt_lo = readl_relaxed(sys_ctr_base + CNTCV_LO); - tmp_hi = readl_relaxed(sys_ctr_base + CNTCV_HI); + cnt_hi = readl_relaxed(sys_ctr_base + cntcv_hi); + cnt_lo = readl_relaxed(sys_ctr_base + cntcv_lo); + tmp_hi = readl_relaxed(sys_ctr_base + cntcv_hi); } while (tmp_hi != cnt_hi); return ((u64) cnt_hi << 32) | cnt_lo; @@ -139,6 +144,11 @@ static int __init sysctr_timer_init(struct device_node *np) to_sysctr.of_clk.rate /= SYS_CTR_CLK_DIV; } + if (of_device_is_compatible(np, "nxp,imx95-sysctr-timer")) { + cntcv_hi = CNTCV_HI_IMX95; + cntcv_lo = CNTCV_LO_IMX95; + } + sys_ctr_base = timer_of_base(&to_sysctr); cmpcr = readl(sys_ctr_base + CMPCR); cmpcr &= ~SYS_CTR_EN;