diff mbox series

[1/1] spi: nxp-fspi: Adjust LUT debug output alignment

Message ID 20240118121016.3734770-1-alexander.stein@ew.tq-group.com
State Accepted
Commit 50c4f8172dbf9fdf152eae5179e233879a72dd47
Headers show
Series [1/1] spi: nxp-fspi: Adjust LUT debug output alignment | expand

Commit Message

Alexander Stein Jan. 18, 2024, 12:10 p.m. UTC
Ensure the command value and LUT entry values have a fixed width. This
way consecutive output lines can be read much easier.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 drivers/spi/spi-nxp-fspi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Han Xu Jan. 18, 2024, 3:43 p.m. UTC | #1
On 24/01/18 01:10PM, Alexander Stein wrote:
> Ensure the command value and LUT entry values have a fixed width. This
> way consecutive output lines can be read much easier.
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>

Acked-by: Han Xu <han.xu@nxp.com>

> ---
>  drivers/spi/spi-nxp-fspi.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
> index e13f678f23952..88397f712a3b5 100644
> --- a/drivers/spi/spi-nxp-fspi.c
> +++ b/drivers/spi/spi-nxp-fspi.c
> @@ -591,7 +591,7 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
>  	for (i = 0; i < ARRAY_SIZE(lutval); i++)
>  		fspi_writel(f, lutval[i], base + FSPI_LUT_REG(i));
>  
> -	dev_dbg(f->dev, "CMD[%x] lutval[0:%x \t 1:%x \t 2:%x \t 3:%x], size: 0x%08x\n",
> +	dev_dbg(f->dev, "CMD[%02x] lutval[0:%08x 1:%08x 2:%08x 3:%08x], size: 0x%08x\n",
>  		op->cmd.opcode, lutval[0], lutval[1], lutval[2], lutval[3], op->data.nbytes);
>  
>  	/* lock LUT */
> -- 
> 2.34.1
>
Mark Brown Jan. 22, 2024, 4:49 p.m. UTC | #2
On Thu, 18 Jan 2024 13:10:16 +0100, Alexander Stein wrote:
> Ensure the command value and LUT entry values have a fixed width. This
> way consecutive output lines can be read much easier.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: nxp-fspi: Adjust LUT debug output alignment
      commit: 50c4f8172dbf9fdf152eae5179e233879a72dd47

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index e13f678f23952..88397f712a3b5 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -591,7 +591,7 @@  static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
 	for (i = 0; i < ARRAY_SIZE(lutval); i++)
 		fspi_writel(f, lutval[i], base + FSPI_LUT_REG(i));
 
-	dev_dbg(f->dev, "CMD[%x] lutval[0:%x \t 1:%x \t 2:%x \t 3:%x], size: 0x%08x\n",
+	dev_dbg(f->dev, "CMD[%02x] lutval[0:%08x 1:%08x 2:%08x 3:%08x], size: 0x%08x\n",
 		op->cmd.opcode, lutval[0], lutval[1], lutval[2], lutval[3], op->data.nbytes);
 
 	/* lock LUT */