Message ID | 20231227123257.1170590-5-enachman@marvell.com |
---|---|
State | Accepted |
Commit | 5d40213347480e3ab903d5438dbd0d6b0110e6b8 |
Headers | show |
Series | mmc: xenon: add AC5 support | expand |
On 27/12/23 14:32, Elad Nachman wrote: > From: Elad Nachman <enachman@marvell.com> > > AC5/X/IM SOCs has a variant of the Xenon eMMC controller, > in which only 31-bit of addressing pass from the controller > on the AXI bus. > Since we cannot guarantee that only buffers from the first 2GB > of memory will reach the driver, the driver is configured for > SDMA mode, without 64-bit mode, overriding the DMA mask to 34-bit > to support the DDR memory mapping, which starts at offset 8GB. > > Signed-off-by: Elad Nachman <enachman@marvell.com> One minor comment below otherwise: Acked-by: Adrian Hunter <adrian.hunter@intel.com> > --- > drivers/mmc/host/sdhci-xenon.c | 33 ++++++++++++++++++++++++++++++++- > drivers/mmc/host/sdhci-xenon.h | 3 ++- > 2 files changed, 34 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c > index 25ba7aecc3be..4d6df1815da1 100644 > --- a/drivers/mmc/host/sdhci-xenon.c > +++ b/drivers/mmc/host/sdhci-xenon.c > @@ -18,6 +18,8 @@ > #include <linux/of.h> > #include <linux/pm.h> > #include <linux/pm_runtime.h> > +#include <linux/mm.h> > +#include <linux/dma-mapping.h> > > #include "sdhci-pltfm.h" > #include "sdhci-xenon.h" > @@ -422,6 +424,7 @@ static int xenon_probe_params(struct platform_device *pdev) > struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); > u32 sdhc_id, nr_sdhc; > u32 tuning_count; > + struct sysinfo si; > > /* Disable HS200 on Armada AP806 */ > if (priv->hw_version == XENON_AP806) > @@ -450,6 +453,23 @@ static int xenon_probe_params(struct platform_device *pdev) > } > priv->tuning_count = tuning_count; > > + /* > + * AC5/X/IM HW has only 31-bits passed in the crossbar switch. > + * If we have more than 2GB of memory, this means we might pass > + * memory pointers which are above 2GB and which cannot be properly > + * represented. In this case, disable ADMA, 64-bit DMA and allow only SDMA. > + * This effectively will enable bounce buffer quirk in the > + * generic SDHCI driver, which will make sure DMA is only done > + * from supported memory regions: > + */ > + if (priv->hw_version == XENON_AC5) { > + si_meminfo(&si); > + if (si.totalram * si.mem_unit > SZ_2G) { > + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; > + host->quirks2 |= SDHCI_QUIRK2_BROKEN_64_BIT_DMA; > + } > + } > + > return xenon_phy_parse_params(dev, host); > } > > @@ -562,7 +582,17 @@ static int xenon_probe(struct platform_device *pdev) > goto remove_sdhc; > > pm_runtime_put_autosuspend(&pdev->dev); > - > + /* > + * If we previously detected AC5 with over 2GB of memory, > + * then we disable ADMA and 64-bit DMA. > + * This means generic SDHCI driver has set the DMA mask to > + * 32-bit. Since DDR starts at 0x2_0000_0000, we must use > + * 34-bit DMA mask to access this DDR memory: > + */ > + if (priv->hw_version == XENON_AC5) { > + if (host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA) Kernel style is to avoid nested if-statements i.e. if (priv->hw_version == XENON_AC5 && host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA) dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(34)); > + dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(34)); > + } > return 0; > > remove_sdhc: > @@ -680,6 +710,7 @@ static const struct of_device_id sdhci_xenon_dt_ids[] = { > { .compatible = "marvell,armada-ap807-sdhci", .data = (void *)XENON_AP807}, > { .compatible = "marvell,armada-cp110-sdhci", .data = (void *)XENON_CP110}, > { .compatible = "marvell,armada-3700-sdhci", .data = (void *)XENON_A3700}, > + { .compatible = "marvell,ac5-sdhci", .data = (void *)XENON_AC5}, > {} > }; > MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids); > diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h > index 3e9c6c908a79..0460d97aad26 100644 > --- a/drivers/mmc/host/sdhci-xenon.h > +++ b/drivers/mmc/host/sdhci-xenon.h > @@ -57,7 +57,8 @@ enum xenon_variant { > XENON_A3700, > XENON_AP806, > XENON_AP807, > - XENON_CP110 > + XENON_CP110, > + XENON_AC5 > }; > > struct xenon_priv {
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c index 25ba7aecc3be..4d6df1815da1 100644 --- a/drivers/mmc/host/sdhci-xenon.c +++ b/drivers/mmc/host/sdhci-xenon.c @@ -18,6 +18,8 @@ #include <linux/of.h> #include <linux/pm.h> #include <linux/pm_runtime.h> +#include <linux/mm.h> +#include <linux/dma-mapping.h> #include "sdhci-pltfm.h" #include "sdhci-xenon.h" @@ -422,6 +424,7 @@ static int xenon_probe_params(struct platform_device *pdev) struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); u32 sdhc_id, nr_sdhc; u32 tuning_count; + struct sysinfo si; /* Disable HS200 on Armada AP806 */ if (priv->hw_version == XENON_AP806) @@ -450,6 +453,23 @@ static int xenon_probe_params(struct platform_device *pdev) } priv->tuning_count = tuning_count; + /* + * AC5/X/IM HW has only 31-bits passed in the crossbar switch. + * If we have more than 2GB of memory, this means we might pass + * memory pointers which are above 2GB and which cannot be properly + * represented. In this case, disable ADMA, 64-bit DMA and allow only SDMA. + * This effectively will enable bounce buffer quirk in the + * generic SDHCI driver, which will make sure DMA is only done + * from supported memory regions: + */ + if (priv->hw_version == XENON_AC5) { + si_meminfo(&si); + if (si.totalram * si.mem_unit > SZ_2G) { + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; + host->quirks2 |= SDHCI_QUIRK2_BROKEN_64_BIT_DMA; + } + } + return xenon_phy_parse_params(dev, host); } @@ -562,7 +582,17 @@ static int xenon_probe(struct platform_device *pdev) goto remove_sdhc; pm_runtime_put_autosuspend(&pdev->dev); - + /* + * If we previously detected AC5 with over 2GB of memory, + * then we disable ADMA and 64-bit DMA. + * This means generic SDHCI driver has set the DMA mask to + * 32-bit. Since DDR starts at 0x2_0000_0000, we must use + * 34-bit DMA mask to access this DDR memory: + */ + if (priv->hw_version == XENON_AC5) { + if (host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA) + dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(34)); + } return 0; remove_sdhc: @@ -680,6 +710,7 @@ static const struct of_device_id sdhci_xenon_dt_ids[] = { { .compatible = "marvell,armada-ap807-sdhci", .data = (void *)XENON_AP807}, { .compatible = "marvell,armada-cp110-sdhci", .data = (void *)XENON_CP110}, { .compatible = "marvell,armada-3700-sdhci", .data = (void *)XENON_A3700}, + { .compatible = "marvell,ac5-sdhci", .data = (void *)XENON_AC5}, {} }; MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids); diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h index 3e9c6c908a79..0460d97aad26 100644 --- a/drivers/mmc/host/sdhci-xenon.h +++ b/drivers/mmc/host/sdhci-xenon.h @@ -57,7 +57,8 @@ enum xenon_variant { XENON_A3700, XENON_AP806, XENON_AP807, - XENON_CP110 + XENON_CP110, + XENON_AC5 }; struct xenon_priv {