@@ -2304,6 +2304,12 @@ F: include/sysemu/rng*.h
F: backends/rng*.c
F: tests/qtest/virtio-rng-test.c
+vhost-user-stubs
+M: Alex Bennée <alex.bennee@linaro.org>
+S: Maintained
+F: hw/virtio/vhost-user-base.c
+F: hw/virtio/vhost-user-device*
+
vhost-user-rng
M: Mathieu Poirier <mathieu.poirier@linaro.org>
S: Supported
similarity index 71%
rename from include/hw/virtio/vhost-user-device.h
rename to include/hw/virtio/vhost-user-base.h
@@ -6,8 +6,8 @@
* SPDX-License-Identifier: GPL-2.0-or-later
*/
-#ifndef QEMU_VHOST_USER_DEVICE_H
-#define QEMU_VHOST_USER_DEVICE_H
+#ifndef QEMU_VHOST_USER_BASE_H
+#define QEMU_VHOST_USER_BASE_H
#include "hw/virtio/vhost.h"
#include "hw/virtio/vhost-user.h"
@@ -17,11 +17,13 @@
OBJECT_DECLARE_TYPE(VHostUserBase, VHostUserBaseClass, VHOST_USER_BASE)
struct VHostUserBase {
- VirtIODevice parent;
+ VirtIODevice parent_obj;
+
/* Properties */
CharBackend chardev;
uint16_t virtio_id;
uint32_t num_vqs;
+ uint32_t vq_size; /* can't exceed VIRTIO_QUEUE_MAX */
uint32_t config_size;
/* State tracking */
VhostUserState vhost_user;
@@ -31,16 +33,17 @@ struct VHostUserBase {
bool connected;
};
- /* needed so we can use the base realize after specialisation
- tweaks */
+/*
+ * Needed so we can use the base realize after specialisation
+ * tweaks
+ */
struct VHostUserBaseClass {
- /*< private >*/
VirtioDeviceClass parent_class;
- /*< public >*/
+
DeviceRealize parent_realize;
};
-/* shared for the benefit of the derived pci class */
+
#define TYPE_VHOST_USER_DEVICE "vhost-user-device"
-#endif /* QEMU_VHOST_USER_DEVICE_H */
+#endif /* QEMU_VHOST_USER_BASE_H */
new file mode 100644
@@ -0,0 +1,346 @@
+/*
+ * Base vhost-user-base implementation. This can be used to derive a
+ * more fully specified vhost-user backend either generically (see
+ * vhost-user-device) or via a specific stub for a device which
+ * encapsulates some fixed parameters.
+ *
+ * Copyright (c) 2023 Linaro Ltd
+ * Author: Alex Bennée <alex.bennee@linaro.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/qdev-properties.h"
+#include "hw/virtio/virtio-bus.h"
+#include "hw/virtio/vhost-user-base.h"
+#include "qemu/error-report.h"
+
+static void vub_start(VirtIODevice *vdev)
+{
+ BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
+ VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+ VHostUserBase *vub = VHOST_USER_BASE(vdev);
+ int ret, i;
+
+ if (!k->set_guest_notifiers) {
+ error_report("binding does not support guest notifiers");
+ return;
+ }
+
+ ret = vhost_dev_enable_notifiers(&vub->vhost_dev, vdev);
+ if (ret < 0) {
+ error_report("Error enabling host notifiers: %d", -ret);
+ return;
+ }
+
+ ret = k->set_guest_notifiers(qbus->parent, vub->vhost_dev.nvqs, true);
+ if (ret < 0) {
+ error_report("Error binding guest notifier: %d", -ret);
+ goto err_host_notifiers;
+ }
+
+ vub->vhost_dev.acked_features = vdev->guest_features;
+
+ ret = vhost_dev_start(&vub->vhost_dev, vdev, true);
+ if (ret < 0) {
+ error_report("Error starting vhost-user-base: %d", -ret);
+ goto err_guest_notifiers;
+ }
+
+ /*
+ * guest_notifier_mask/pending not used yet, so just unmask
+ * everything here. virtio-pci will do the right thing by
+ * enabling/disabling irqfd.
+ */
+ for (i = 0; i < vub->vhost_dev.nvqs; i++) {
+ vhost_virtqueue_mask(&vub->vhost_dev, vdev, i, false);
+ }
+
+ return;
+
+err_guest_notifiers:
+ k->set_guest_notifiers(qbus->parent, vub->vhost_dev.nvqs, false);
+err_host_notifiers:
+ vhost_dev_disable_notifiers(&vub->vhost_dev, vdev);
+}
+
+static void vub_stop(VirtIODevice *vdev)
+{
+ VHostUserBase *vub = VHOST_USER_BASE(vdev);
+ BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
+ VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+ int ret;
+
+ if (!k->set_guest_notifiers) {
+ return;
+ }
+
+ vhost_dev_stop(&vub->vhost_dev, vdev, true);
+
+ ret = k->set_guest_notifiers(qbus->parent, vub->vhost_dev.nvqs, false);
+ if (ret < 0) {
+ error_report("vhost guest notifier cleanup failed: %d", ret);
+ return;
+ }
+
+ vhost_dev_disable_notifiers(&vub->vhost_dev, vdev);
+}
+
+static void vub_set_status(VirtIODevice *vdev, uint8_t status)
+{
+ VHostUserBase *vub = VHOST_USER_BASE(vdev);
+ bool should_start = virtio_device_should_start(vdev, status);
+
+ if (vhost_dev_is_started(&vub->vhost_dev) == should_start) {
+ return;
+ }
+
+ if (should_start) {
+ vub_start(vdev);
+ } else {
+ vub_stop(vdev);
+ }
+}
+
+/*
+ * For an implementation where everything is delegated to the backend
+ * we don't do anything other than return the full feature set offered
+ * by the daemon (module the reserved feature bit).
+ */
+static uint64_t vub_get_features(VirtIODevice *vdev,
+ uint64_t requested_features, Error **errp)
+{
+ VHostUserBase *vub = VHOST_USER_BASE(vdev);
+ /* This should be set when the vhost connection initialises */
+ g_assert(vub->vhost_dev.features);
+ return vub->vhost_dev.features & ~(1ULL << VHOST_USER_F_PROTOCOL_FEATURES);
+}
+
+/*
+ * To handle VirtIO config we need to know the size of the config
+ * space. We don't cache the config but re-fetch it from the guest
+ * every time in case something has changed.
+ */
+static void vub_get_config(VirtIODevice *vdev, uint8_t *config)
+{
+ VHostUserBase *vub = VHOST_USER_BASE(vdev);
+ Error *local_err = NULL;
+
+ /*
+ * There will have been a warning during vhost_dev_init, but lets
+ * assert here as nothing will go right now.
+ */
+ g_assert(vub->config_size && vub->vhost_user.supports_config == true);
+
+ if (vhost_dev_get_config(&vub->vhost_dev, config,
+ vub->config_size, &local_err)) {
+ error_report_err(local_err);
+ }
+}
+
+/*
+ * When the daemon signals an update to the config we just need to
+ * signal the guest as we re-read the config on demand above.
+ */
+static int vub_config_notifier(struct vhost_dev *dev)
+{
+ virtio_notify_config(dev->vdev);
+ return 0;
+}
+
+const VhostDevConfigOps vub_config_ops = {
+ .vhost_dev_config_notifier = vub_config_notifier,
+};
+
+static void vub_handle_output(VirtIODevice *vdev, VirtQueue *vq)
+{
+ /*
+ * Not normally called; it's the daemon that handles the queue;
+ * however virtio's cleanup path can call this.
+ */
+}
+
+static void do_vhost_user_cleanup(VirtIODevice *vdev, VHostUserBase *vub)
+{
+ vhost_user_cleanup(&vub->vhost_user);
+
+ for (int i = 0; i < vub->num_vqs; i++) {
+ VirtQueue *vq = g_ptr_array_index(vub->vqs, i);
+ virtio_delete_queue(vq);
+ }
+
+ virtio_cleanup(vdev);
+}
+
+static int vub_connect(DeviceState *dev)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VHostUserBase *vub = VHOST_USER_BASE(vdev);
+ struct vhost_dev *vhost_dev = &vub->vhost_dev;
+
+ if (vub->connected) {
+ return 0;
+ }
+ vub->connected = true;
+
+ /*
+ * If we support VHOST_USER_GET_CONFIG we must enable the notifier
+ * so we can ping the guest when it updates.
+ */
+ if (vub->vhost_user.supports_config) {
+ vhost_dev_set_config_notifier(vhost_dev, &vub_config_ops);
+ }
+
+ /* restore vhost state */
+ if (virtio_device_started(vdev, vdev->status)) {
+ vub_start(vdev);
+ }
+
+ return 0;
+}
+
+static void vub_disconnect(DeviceState *dev)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VHostUserBase *vub = VHOST_USER_BASE(vdev);
+
+ if (!vub->connected) {
+ return;
+ }
+ vub->connected = false;
+
+ if (vhost_dev_is_started(&vub->vhost_dev)) {
+ vub_stop(vdev);
+ }
+}
+
+static void vub_event(void *opaque, QEMUChrEvent event)
+{
+ DeviceState *dev = opaque;
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VHostUserBase *vub = VHOST_USER_BASE(vdev);
+
+ switch (event) {
+ case CHR_EVENT_OPENED:
+ if (vub_connect(dev) < 0) {
+ qemu_chr_fe_disconnect(&vub->chardev);
+ return;
+ }
+ break;
+ case CHR_EVENT_CLOSED:
+ vub_disconnect(dev);
+ break;
+ case CHR_EVENT_BREAK:
+ case CHR_EVENT_MUX_IN:
+ case CHR_EVENT_MUX_OUT:
+ /* Ignore */
+ break;
+ }
+}
+
+static void vub_device_realize(DeviceState *dev, Error **errp)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VHostUserBase *vub = VHOST_USER_BASE(dev);
+ int ret;
+
+ if (!vub->chardev.chr) {
+ error_setg(errp, "vhost-user-base: missing chardev");
+ return;
+ }
+
+ if (!vub->virtio_id) {
+ error_setg(errp, "vhost-user-base: need to define device id");
+ return;
+ }
+
+ if (!vub->num_vqs) {
+ vub->num_vqs = 1; /* reasonable default? */
+ }
+
+ if (!vub->vq_size) {
+ vub->vq_size = 64;
+ }
+
+ /*
+ * We can't handle config requests unless we know the size of the
+ * config region, specialisations of the vhost-user-base will be
+ * able to set this.
+ */
+ if (vub->config_size) {
+ vub->vhost_user.supports_config = true;
+ }
+
+ if (!vhost_user_init(&vub->vhost_user, &vub->chardev, errp)) {
+ return;
+ }
+
+ virtio_init(vdev, vub->virtio_id, vub->config_size);
+
+ /*
+ * Disable guest notifiers, by default all notifications will be via the
+ * asynchronous vhost-user socket.
+ */
+ vdev->use_guest_notifier_mask = false;
+
+ /* Allocate queues */
+ vub->vqs = g_ptr_array_sized_new(vub->num_vqs);
+ for (int i = 0; i < vub->num_vqs; i++) {
+ g_ptr_array_add(vub->vqs,
+ virtio_add_queue(vdev, vub->vq_size,
+ vub_handle_output));
+ }
+
+ vub->vhost_dev.nvqs = vub->num_vqs;
+ vub->vhost_dev.vqs = g_new0(struct vhost_virtqueue, vub->vhost_dev.nvqs);
+
+ /* connect to backend */
+ ret = vhost_dev_init(&vub->vhost_dev, &vub->vhost_user,
+ VHOST_BACKEND_TYPE_USER, 0, errp);
+
+ if (ret < 0) {
+ do_vhost_user_cleanup(vdev, vub);
+ }
+
+ qemu_chr_fe_set_handlers(&vub->chardev, NULL, NULL, vub_event, NULL,
+ dev, NULL, true);
+}
+
+static void vub_device_unrealize(DeviceState *dev)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VHostUserBase *vub = VHOST_USER_BASE(dev);
+ struct vhost_virtqueue *vhost_vqs = vub->vhost_dev.vqs;
+
+ /* This will stop vhost backend if appropriate. */
+ vub_set_status(vdev, 0);
+ vhost_dev_cleanup(&vub->vhost_dev);
+ g_free(vhost_vqs);
+ do_vhost_user_cleanup(vdev, vub);
+}
+
+static void vub_class_init(ObjectClass *klass, void *data)
+{
+ VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
+
+ vdc->realize = vub_device_realize;
+ vdc->unrealize = vub_device_unrealize;
+ vdc->get_features = vub_get_features;
+ vdc->get_config = vub_get_config;
+ vdc->set_status = vub_set_status;
+}
+
+static const TypeInfo vub_types[] = {
+ {
+ .name = TYPE_VHOST_USER_BASE,
+ .parent = TYPE_VIRTIO_DEVICE,
+ .instance_size = sizeof(VHostUserBase),
+ .class_init = vub_class_init,
+ .class_size = sizeof(VHostUserBaseClass),
+ .abstract = true
+ }
+};
+
+DEFINE_TYPES(vub_types)
@@ -9,21 +9,18 @@
#include "qemu/osdep.h"
#include "hw/qdev-properties.h"
-#include "hw/virtio/vhost-user-device.h"
+#include "hw/virtio/vhost-user-base.h"
#include "hw/virtio/virtio-pci.h"
struct VHostUserDevicePCI {
VirtIOPCIProxy parent_obj;
+
VHostUserBase vub;
};
-typedef struct VHostUserDevicePCI VHostUserDevicePCI;
-
#define TYPE_VHOST_USER_DEVICE_PCI "vhost-user-device-pci-base"
-DECLARE_INSTANCE_CHECKER(VHostUserDevicePCI,
- VHOST_USER_DEVICE_PCI,
- TYPE_VHOST_USER_DEVICE_PCI)
+OBJECT_DECLARE_SIMPLE_TYPE(VHostUserDevicePCI, VHOST_USER_DEVICE_PCI)
static void vhost_user_device_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
{
@@ -39,6 +36,10 @@ static void vhost_user_device_pci_class_init(ObjectClass *klass, void *data)
DeviceClass *dc = DEVICE_CLASS(klass);
VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass);
PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass);
+
+ /* Reason: stop users confusing themselves */
+ dc->user_creatable = false;
+
k->realize = vhost_user_device_pci_realize;
set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
@@ -1,7 +1,10 @@
/*
- * Generic vhost-user stub. This can be used to connect to any
- * vhost-user backend. All configuration details must be handled by
- * the vhost-user daemon itself
+ * Generic vhost-user-device implementation for any vhost-user-backend
+ *
+ * This is a concrete implementation of vhost-user-base which can be
+ * configured via properties. It is useful for development and
+ * prototyping. It expects configuration details (if any) to be
+ * handled by the vhost-user daemon itself.
*
* Copyright (c) 2023 Linaro Ltd
* Author: Alex Bennée <alex.bennee@linaro.org>
@@ -13,329 +16,9 @@
#include "qapi/error.h"
#include "hw/qdev-properties.h"
#include "hw/virtio/virtio-bus.h"
-#include "hw/virtio/vhost-user-device.h"
+#include "hw/virtio/vhost-user-base.h"
#include "qemu/error-report.h"
-static void vub_start(VirtIODevice *vdev)
-{
- BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
- VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
- VHostUserBase *vub = VHOST_USER_BASE(vdev);
- int ret, i;
-
- if (!k->set_guest_notifiers) {
- error_report("binding does not support guest notifiers");
- return;
- }
-
- ret = vhost_dev_enable_notifiers(&vub->vhost_dev, vdev);
- if (ret < 0) {
- error_report("Error enabling host notifiers: %d", -ret);
- return;
- }
-
- ret = k->set_guest_notifiers(qbus->parent, vub->vhost_dev.nvqs, true);
- if (ret < 0) {
- error_report("Error binding guest notifier: %d", -ret);
- goto err_host_notifiers;
- }
-
- vub->vhost_dev.acked_features = vdev->guest_features;
-
- ret = vhost_dev_start(&vub->vhost_dev, vdev, true);
- if (ret < 0) {
- error_report("Error starting vhost-user-device: %d", -ret);
- goto err_guest_notifiers;
- }
-
- /*
- * guest_notifier_mask/pending not used yet, so just unmask
- * everything here. virtio-pci will do the right thing by
- * enabling/disabling irqfd.
- */
- for (i = 0; i < vub->vhost_dev.nvqs; i++) {
- vhost_virtqueue_mask(&vub->vhost_dev, vdev, i, false);
- }
-
- return;
-
-err_guest_notifiers:
- k->set_guest_notifiers(qbus->parent, vub->vhost_dev.nvqs, false);
-err_host_notifiers:
- vhost_dev_disable_notifiers(&vub->vhost_dev, vdev);
-}
-
-static void vub_stop(VirtIODevice *vdev)
-{
- VHostUserBase *vub = VHOST_USER_BASE(vdev);
- BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
- VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
- int ret;
-
- if (!k->set_guest_notifiers) {
- return;
- }
-
- vhost_dev_stop(&vub->vhost_dev, vdev, true);
-
- ret = k->set_guest_notifiers(qbus->parent, vub->vhost_dev.nvqs, false);
- if (ret < 0) {
- error_report("vhost guest notifier cleanup failed: %d", ret);
- return;
- }
-
- vhost_dev_disable_notifiers(&vub->vhost_dev, vdev);
-}
-
-static void vub_set_status(VirtIODevice *vdev, uint8_t status)
-{
- VHostUserBase *vub = VHOST_USER_BASE(vdev);
- bool should_start = virtio_device_should_start(vdev, status);
-
- if (vhost_dev_is_started(&vub->vhost_dev) == should_start) {
- return;
- }
-
- if (should_start) {
- vub_start(vdev);
- } else {
- vub_stop(vdev);
- }
-}
-
-/*
- * For an implementation where everything is delegated to the backend
- * we don't do anything other than return the full feature set offered
- * by the daemon (module the reserved feature bit).
- */
-static uint64_t vub_get_features(VirtIODevice *vdev,
- uint64_t requested_features, Error **errp)
-{
- VHostUserBase *vub = VHOST_USER_BASE(vdev);
- /* This should be set when the vhost connection initialises */
- g_assert(vub->vhost_dev.features);
- return vub->vhost_dev.features & ~(1ULL << VHOST_USER_F_PROTOCOL_FEATURES);
-}
-
-/*
- * To handle VirtIO config we need to know the size of the config
- * space. We don't cache the config but re-fetch it from the guest
- * every time in case something has changed.
- */
-static void vub_get_config(VirtIODevice *vdev, uint8_t *config)
-{
- VHostUserBase *vub = VHOST_USER_BASE(vdev);
- Error *local_err = NULL;
-
- /*
- * There will have been a warning during vhost_dev_init, but lets
- * assert here as nothing will go right now.
- */
- g_assert(vub->config_size && vub->vhost_user.supports_config == true);
-
- if (vhost_dev_get_config(&vub->vhost_dev, config,
- vub->config_size, &local_err)) {
- error_report_err(local_err);
- }
-}
-
-/*
- * When the daemon signals an update to the config we just need to
- * signal the guest as we re-read the config on demand above.
- */
-static int vub_config_notifier(struct vhost_dev *dev)
-{
- virtio_notify_config(dev->vdev);
- return 0;
-}
-
-const VhostDevConfigOps vub_config_ops = {
- .vhost_dev_config_notifier = vub_config_notifier,
-};
-
-static void vub_handle_output(VirtIODevice *vdev, VirtQueue *vq)
-{
- /*
- * Not normally called; it's the daemon that handles the queue;
- * however virtio's cleanup path can call this.
- */
-}
-
-static void do_vhost_user_cleanup(VirtIODevice *vdev, VHostUserBase *vub)
-{
- vhost_user_cleanup(&vub->vhost_user);
-
- for (int i = 0; i < vub->num_vqs; i++) {
- VirtQueue *vq = g_ptr_array_index(vub->vqs, i);
- virtio_delete_queue(vq);
- }
-
- virtio_cleanup(vdev);
-}
-
-static int vub_connect(DeviceState *dev)
-{
- VirtIODevice *vdev = VIRTIO_DEVICE(dev);
- VHostUserBase *vub = VHOST_USER_BASE(vdev);
- struct vhost_dev *vhost_dev = &vub->vhost_dev;
-
- if (vub->connected) {
- return 0;
- }
- vub->connected = true;
-
- /*
- * If we support VHOST_USER_GET_CONFIG we must enable the notifier
- * so we can ping the guest when it updates.
- */
- if (vub->vhost_user.supports_config) {
- vhost_dev_set_config_notifier(vhost_dev, &vub_config_ops);
- }
-
- /* restore vhost state */
- if (virtio_device_started(vdev, vdev->status)) {
- vub_start(vdev);
- }
-
- return 0;
-}
-
-static void vub_disconnect(DeviceState *dev)
-{
- VirtIODevice *vdev = VIRTIO_DEVICE(dev);
- VHostUserBase *vub = VHOST_USER_BASE(vdev);
-
- if (!vub->connected) {
- return;
- }
- vub->connected = false;
-
- if (vhost_dev_is_started(&vub->vhost_dev)) {
- vub_stop(vdev);
- }
-}
-
-static void vub_event(void *opaque, QEMUChrEvent event)
-{
- DeviceState *dev = opaque;
- VirtIODevice *vdev = VIRTIO_DEVICE(dev);
- VHostUserBase *vub = VHOST_USER_BASE(vdev);
-
- switch (event) {
- case CHR_EVENT_OPENED:
- if (vub_connect(dev) < 0) {
- qemu_chr_fe_disconnect(&vub->chardev);
- return;
- }
- break;
- case CHR_EVENT_CLOSED:
- vub_disconnect(dev);
- break;
- case CHR_EVENT_BREAK:
- case CHR_EVENT_MUX_IN:
- case CHR_EVENT_MUX_OUT:
- /* Ignore */
- break;
- }
-}
-
-static void vub_device_realize(DeviceState *dev, Error **errp)
-{
- VirtIODevice *vdev = VIRTIO_DEVICE(dev);
- VHostUserBase *vub = VHOST_USER_BASE(dev);
- int ret;
-
- if (!vub->chardev.chr) {
- error_setg(errp, "vhost-user-device: missing chardev");
- return;
- }
-
- if (!vub->virtio_id) {
- error_setg(errp, "vhost-user-device: need to define device id");
- return;
- }
-
- if (!vub->num_vqs) {
- vub->num_vqs = 1; /* reasonable default? */
- }
-
- /*
- * We can't handle config requests unless we know the size of the
- * config region, specialisations of the vhost-user-device will be
- * able to set this.
- */
- if (vub->config_size) {
- vub->vhost_user.supports_config = true;
- }
-
- if (!vhost_user_init(&vub->vhost_user, &vub->chardev, errp)) {
- return;
- }
-
- virtio_init(vdev, vub->virtio_id, vub->config_size);
-
- /*
- * Disable guest notifiers, by default all notifications will be via the
- * asynchronous vhost-user socket.
- */
- vdev->use_guest_notifier_mask = false;
-
- /* Allocate queues */
- vub->vqs = g_ptr_array_sized_new(vub->num_vqs);
- for (int i = 0; i < vub->num_vqs; i++) {
- g_ptr_array_add(vub->vqs,
- virtio_add_queue(vdev, 4, vub_handle_output));
- }
-
- vub->vhost_dev.nvqs = vub->num_vqs;
- vub->vhost_dev.vqs = g_new0(struct vhost_virtqueue, vub->vhost_dev.nvqs);
-
- /* connect to backend */
- ret = vhost_dev_init(&vub->vhost_dev, &vub->vhost_user,
- VHOST_BACKEND_TYPE_USER, 0, errp);
-
- if (ret < 0) {
- do_vhost_user_cleanup(vdev, vub);
- }
-
- qemu_chr_fe_set_handlers(&vub->chardev, NULL, NULL, vub_event, NULL,
- dev, NULL, true);
-}
-
-static void vub_device_unrealize(DeviceState *dev)
-{
- VirtIODevice *vdev = VIRTIO_DEVICE(dev);
- VHostUserBase *vub = VHOST_USER_BASE(dev);
- struct vhost_virtqueue *vhost_vqs = vub->vhost_dev.vqs;
-
- /* This will stop vhost backend if appropriate. */
- vub_set_status(vdev, 0);
- vhost_dev_cleanup(&vub->vhost_dev);
- g_free(vhost_vqs);
- do_vhost_user_cleanup(vdev, vub);
-}
-
-static void vub_class_init(ObjectClass *klass, void *data)
-{
- VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
-
- vdc->realize = vub_device_realize;
- vdc->unrealize = vub_device_unrealize;
- vdc->get_features = vub_get_features;
- vdc->get_config = vub_get_config;
- vdc->set_status = vub_set_status;
-}
-
-static const TypeInfo vub_info = {
- .name = TYPE_VHOST_USER_BASE,
- .parent = TYPE_VIRTIO_DEVICE,
- .instance_size = sizeof(VHostUserBase),
- .class_init = vub_class_init,
- .class_size = sizeof(VHostUserBaseClass),
- .abstract = true
-};
-
-
/*
* The following is a concrete implementation of the base class which
* allows the user to define the key parameters via the command line.
@@ -349,6 +32,7 @@ static const VMStateDescription vud_vmstate = {
static Property vud_properties[] = {
DEFINE_PROP_CHR("chardev", VHostUserBase, chardev),
DEFINE_PROP_UINT16("virtio-id", VHostUserBase, virtio_id, 0),
+ DEFINE_PROP_UINT32("vq_size", VHostUserBase, vq_size, 64),
DEFINE_PROP_UINT32("num_vqs", VHostUserBase, num_vqs, 1),
DEFINE_PROP_UINT32("config_size", VHostUserBase, config_size, 0),
DEFINE_PROP_END_OF_LIST(),
@@ -358,6 +42,9 @@ static void vud_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
+ /* Reason: stop inexperienced users confusing themselves */
+ dc->user_creatable = false;
+
device_class_set_props(dc, vud_properties);
dc->vmsd = &vud_vmstate;
set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
@@ -366,14 +53,11 @@ static void vud_class_init(ObjectClass *klass, void *data)
static const TypeInfo vud_info = {
.name = TYPE_VHOST_USER_DEVICE,
.parent = TYPE_VHOST_USER_BASE,
- .instance_size = sizeof(VHostUserBase),
.class_init = vud_class_init,
- .class_size = sizeof(VHostUserBaseClass),
};
static void vu_register_types(void)
{
- type_register_static(&vub_info);
type_register_static(&vud_info);
}
@@ -17,6 +17,7 @@ if have_vhost
if have_vhost_user
# fixme - this really should be generic
specific_virtio_ss.add(files('vhost-user.c'))
+ system_virtio_ss.add(files('vhost-user-base.c'))
system_virtio_ss.add(files('vhost-user-device.c'))
system_virtio_ss.add(when: 'CONFIG_VIRTIO_PCI', if_true: files('vhost-user-device-pci.c'))
endif
Lets keep a cleaner split between the base class and the derived vhost-user-device which we can use for generic vhost-user stubs. This includes an update to introduce the vq_size property so the number of entries in a virtq can be defined. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> --- v5 - s/parent/parent_obj/ - remove left over vhost-user-device.h - use DEFINE_TYPES v6 - rebase and set .abstract = true for vhost-user-device v7 - checkpatch line length + MAINTAINERS - s/abstract = true/dc->user_creatable = false/ for both mmio and pci --- MAINTAINERS | 6 + ...{vhost-user-device.h => vhost-user-base.h} | 21 +- hw/virtio/vhost-user-base.c | 346 ++++++++++++++++++ hw/virtio/vhost-user-device-pci.c | 13 +- hw/virtio/vhost-user-device.c | 338 +---------------- hw/virtio/meson.build | 1 + 6 files changed, 383 insertions(+), 342 deletions(-) rename include/hw/virtio/{vhost-user-device.h => vhost-user-base.h} (71%) create mode 100644 hw/virtio/vhost-user-base.c