diff mbox series

[3/3] arm64: dts: rockchip: Add support for NanoPi R6C

Message ID 923b4d9bb60fecd080e7c348ec0d4630392eb091.1702647349.git.efectn@protonmail.com
State New
Headers show
Series Add Support for NanoPi R6S and R6C boards | expand

Commit Message

Muhammed Efe Cetin Dec. 15, 2023, 1:55 p.m. UTC
From: Muhammed Efe Cetin <efectn@protonmail.com>

NanoPi R6C is mostly same as R6S variant. It has M2 port instead of a
NIC port and different led labeling.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile              |  3 ++-
 .../arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 14 ++++++++++++++
 2 files changed, 16 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts

Comments

Krzysztof Kozlowski Dec. 18, 2023, 7:24 a.m. UTC | #1
On 15/12/2023 14:55, efectn@6tel.net wrote:
> From: Muhammed Efe Cetin <efectn@protonmail.com>
> 
> NanoPi R6C is mostly same as R6S variant. It has M2 port instead of a
> NIC port and different led labeling.
> 
> Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile              |  3 ++-
>  .../arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 14 ++++++++++++++
>  2 files changed, 16 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index ed2583dcd..261505081 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -114,4 +114,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
> -dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb
> \ No newline at end of file
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
> \ No newline at end of file

Still warnings...

> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
> new file mode 100644
> index 000000000..8031098c3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
> @@ -0,0 +1,14 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "rk3588s-nanopi-r6s.dts"
> +
> +/ {
> +	model = "FriendlyElec NanoPi R6C";
> +	compatible = "friendlyelec,nanopi-r6c", "rockchip,rk3588s";

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).



Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index ed2583dcd..261505081 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -114,4 +114,5 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb
\ No newline at end of file
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
new file mode 100644
index 000000000..8031098c3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
@@ -0,0 +1,14 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588s-nanopi-r6s.dts"
+
+/ {
+	model = "FriendlyElec NanoPi R6C";
+	compatible = "friendlyelec,nanopi-r6c", "rockchip,rk3588s";
+};
+
+&lan2_led {
+	label = "user_led";
+};