| Message ID | 20231214062847.2215542-6-quic_ipkumar@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | [01/10] dt-bindings: clock: Add separate clocks for PCIe and USB for Combo PHY | expand |
On 14/12/2023 07:28, Praveenkumar I wrote: > Qualcomm IPQ5332 has single-lane and dual-lane PCIe UNIPHY > with Gen 3 support. This UNIPHY is similar to the one found > on Qualcomm IPQ5018. Hence add the bindings in qcom,uniphy-pcie. > > Clocks and resets are different for IPQ5332. Update the > bindings to support both IPQ5018 and IPQ5332. > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > --- > This patch depends on the below series which adds PCIe support in > Qualcomm IPQ5018 > https://lore.kernel.org/all/20231003120846.28626-1-quic_nsekar@quicinc.com/ > > .../bindings/phy/qcom,uniphy-pcie-28lp.yaml | 65 +++++++++++++++++-- > 1 file changed, 58 insertions(+), 7 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml b/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml > index 6b2574f9532e..205eaec2291e 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml > @@ -20,19 +20,20 @@ properties: > maxItems: 1 > > clocks: > - maxItems: 1 > + minItems: 1 > + maxItems: 4 > > clock-names: > - items: > - - const: pipe_clk > + minItems: 1 > + maxItems: 4 > > resets: > - maxItems: 2 > + minItems: 2 > + maxItems: 3 > > reset-names: > - items: > - - const: phy > - - const: phy_phy > + minItems: 2 > + maxItems: 3 > > "#phy-cells": > const: 0 > @@ -54,6 +55,56 @@ required: > - "#clock-cells" > - clock-output-names > > +allOf: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,ipq5018-uniphy-pcie-gen2x1 > + - qcom,ipq5018-uniphy-pcie-gen2x2 > + then: > + properties: > + clocks: > + minItems: 1 Drop > + maxItems: 1 > + clock-names: > + items: > + - const: pipe_clk > + resets: > + minItems: 2 Drop > + maxItems: 2 > + reset-name: Typo > + items: > + - const: phy > + - const: phy_phy > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,ipq5332-uniphy-pcie-gen3x1 > + - qcom,ipq5332-uniphy-pcie-gen3x2 There are no such compatibles. > + then: > + properties: > + clocks: > + minItems: 4 > + maxItems: 4 > + clock-names: > + items: > + - const: pipe > + - const: lane_m > + - const: lane_s > + - const: phy_ahb > + resets: > + minItems: 2 > + maxItems: 2 So where are three items? > + reset-name: Typo This patch is so confusing, it looks like it does not make any sense. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml b/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml index 6b2574f9532e..205eaec2291e 100644 --- a/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,uniphy-pcie-28lp.yaml @@ -20,19 +20,20 @@ properties: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + maxItems: 4 clock-names: - items: - - const: pipe_clk + minItems: 1 + maxItems: 4 resets: - maxItems: 2 + minItems: 2 + maxItems: 3 reset-names: - items: - - const: phy - - const: phy_phy + minItems: 2 + maxItems: 3 "#phy-cells": const: 0 @@ -54,6 +55,56 @@ required: - "#clock-cells" - clock-output-names +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5018-uniphy-pcie-gen2x1 + - qcom,ipq5018-uniphy-pcie-gen2x2 + then: + properties: + clocks: + minItems: 1 + maxItems: 1 + clock-names: + items: + - const: pipe_clk + resets: + minItems: 2 + maxItems: 2 + reset-name: + items: + - const: phy + - const: phy_phy + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq5332-uniphy-pcie-gen3x1 + - qcom,ipq5332-uniphy-pcie-gen3x2 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: pipe + - const: lane_m + - const: lane_s + - const: phy_ahb + resets: + minItems: 2 + maxItems: 2 + reset-name: + items: + - const: phy + - const: phy_ahb + additionalProperties: false examples:
Qualcomm IPQ5332 has single-lane and dual-lane PCIe UNIPHY with Gen 3 support. This UNIPHY is similar to the one found on Qualcomm IPQ5018. Hence add the bindings in qcom,uniphy-pcie. Clocks and resets are different for IPQ5332. Update the bindings to support both IPQ5018 and IPQ5332. Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> --- This patch depends on the below series which adds PCIe support in Qualcomm IPQ5018 https://lore.kernel.org/all/20231003120846.28626-1-quic_nsekar@quicinc.com/ .../bindings/phy/qcom,uniphy-pcie-28lp.yaml | 65 +++++++++++++++++-- 1 file changed, 58 insertions(+), 7 deletions(-)