diff mbox series

[v1,1/2] backlight: mp3309c: Make use of device properties

Message ID 20231214195158.1335727-2-andriy.shevchenko@linux.intel.com
State New
Headers show
Series backlight: mp3309c: Allow to use on non-OF platforms | expand

Commit Message

Andy Shevchenko Dec. 14, 2023, 7:51 p.m. UTC 
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Add mod_devicetable.h include.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/video/backlight/mp3309c.c | 38 ++++++++++++-------------------
 1 file changed, 15 insertions(+), 23 deletions(-)

Comments

Flavio Suligoi Dec. 15, 2023, 2:13 p.m. UTC | #1 
> Subject: [PATCH v1 1/2] backlight: mp3309c: Make use of device
> properties
> 
> Convert the module to be property provider agnostic and allow
> it to be used on non-OF platforms.
> 
> Add mod_devicetable.h include.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/video/backlight/mp3309c.c | 38 ++++++++++++-------------------
>  1 file changed, 15 insertions(+), 23 deletions(-)

Hi Andy,

I tested the patch in both pwm and analog-ic dimming-mode and everything is ok.
Thanks for the optimizations!

Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Daniel Thompson Dec. 15, 2023, 4:11 p.m. UTC | #2 
On Thu, Dec 14, 2023 at 09:51:13PM +0200, Andy Shevchenko wrote:
> Convert the module to be property provider agnostic and allow
> it to be used on non-OF platforms.
>
> Add mod_devicetable.h include.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/video/backlight/mp3309c.c | 38 ++++++++++++-------------------
>  1 file changed, 15 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/video/backlight/mp3309c.c b/drivers/video/backlight/mp3309c.c
> index 34d71259fac1..d9b08f191999 100644
> --- a/drivers/video/backlight/mp3309c.c
> +++ b/drivers/video/backlight/mp3309c.c
> @@ -15,6 +15,8 @@
>  #include <linux/delay.h>
>  #include <linux/gpio/consumer.h>
>  #include <linux/i2c.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/property.h>
>  #include <linux/pwm.h>
>  #include <linux/regmap.h>
>
> @@ -202,15 +204,12 @@ static const struct backlight_ops mp3309c_bl_ops = {
>  static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,

Pretty minor... but I wonder if it should be renamed:
mp3309c_parse_fwnode().


Daniel.
Andy Shevchenko Dec. 15, 2023, 4:28 p.m. UTC | #3 
On Fri, Dec 15, 2023 at 04:11:02PM +0000, Daniel Thompson wrote:
> On Thu, Dec 14, 2023 at 09:51:13PM +0200, Andy Shevchenko wrote:

...

> >  static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
> 
> Pretty minor... but I wonder if it should be renamed:
> mp3309c_parse_fwnode().

I am fine with either. Lee, do you want this be incorporated?

P.S> Flavio, thanks for testing!
Flavio Suligoi Dec. 18, 2023, 7:58 a.m. UTC | #4 
Hi Daniel,

...

> Subject: Re: [PATCH v1 1/2] backlight: mp3309c: Make use of device
> properties
> > +++ b/drivers/video/backlight/mp3309c.c
> > @@ -15,6 +15,8 @@
> >  #include <linux/delay.h>
> >  #include <linux/gpio/consumer.h>
> >  #include <linux/i2c.h>
> > +#include <linux/mod_devicetable.h>
> > +#include <linux/property.h>
> >  #include <linux/pwm.h>
> >  #include <linux/regmap.h>
> >
> > @@ -202,15 +204,12 @@ static const struct backlight_ops mp3309c_bl_ops
> = {
> >  static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
> 
> Pretty minor... but I wonder if it should be renamed:
> mp3309c_parse_fwnode().

Right! It was my oversight!
Thanks!

> 
> 
> Daniel.

Flavio
diff mbox series

Patch

diff --git a/drivers/video/backlight/mp3309c.c b/drivers/video/backlight/mp3309c.c
index 34d71259fac1..d9b08f191999 100644
--- a/drivers/video/backlight/mp3309c.c
+++ b/drivers/video/backlight/mp3309c.c
@@ -15,6 +15,8 @@ 
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
 
@@ -202,15 +204,12 @@  static const struct backlight_ops mp3309c_bl_ops = {
 static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
 				 struct mp3309c_platform_data *pdata)
 {
-	struct device_node *node = chip->dev->of_node;
-	struct property *prop_pwms;
-	struct property *prop_levels = NULL;
-	int length = 0;
 	int ret, i;
 	unsigned int num_levels, tmp_value;
+	struct device *dev = chip->dev;
 
-	if (!node) {
-		dev_err(chip->dev, "failed to get DT node\n");
+	if (!dev_fwnode(dev)) {
+		dev_err(dev, "failed to get firmware node\n");
 		return -ENODEV;
 	}
 
@@ -224,8 +223,7 @@  static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
 	 * found in the backlight node, the mode switches to PWM mode.
 	 */
 	pdata->dimming_mode = DIMMING_ANALOG_I2C;
-	prop_pwms = of_find_property(node, "pwms", &length);
-	if (prop_pwms) {
+	if (device_property_present(dev, "pwms")) {
 		chip->pwmd = devm_pwm_get(chip->dev, NULL);
 		if (IS_ERR(chip->pwmd))
 			return dev_err_probe(chip->dev, PTR_ERR(chip->pwmd),
@@ -257,11 +255,9 @@  static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
 		/*
 		 * PWM control mode: check for brightness level in DT
 		 */
-		prop_levels = of_find_property(node, "brightness-levels",
-					       &length);
-		if (prop_levels) {
+		if (device_property_present(dev, "brightness-levels")) {
 			/* Read brightness levels from DT */
-			num_levels = length / sizeof(u32);
+			num_levels = device_property_count_u32(dev, "brightness-levels");
 			if (num_levels < 2)
 				return -EINVAL;
 		} else {
@@ -275,10 +271,9 @@  static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
 				     sizeof(*pdata->levels), GFP_KERNEL);
 	if (!pdata->levels)
 		return -ENOMEM;
-	if (prop_levels) {
-		ret = of_property_read_u32_array(node, "brightness-levels",
-						 pdata->levels,
-						 num_levels);
+	if (device_property_present(dev, "brightness-levels")) {
+		ret = device_property_read_u32_array(dev, "brightness-levels",
+						     pdata->levels, num_levels);
 		if (ret < 0)
 			return ret;
 	} else {
@@ -288,8 +283,7 @@  static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
 
 	pdata->max_brightness = num_levels - 1;
 
-	ret = of_property_read_u32(node, "default-brightness",
-				   &pdata->default_brightness);
+	ret = device_property_read_u32(dev, "default-brightness", &pdata->default_brightness);
 	if (ret)
 		pdata->default_brightness = pdata->max_brightness;
 	if (pdata->default_brightness > pdata->max_brightness) {
@@ -310,8 +304,8 @@  static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
 	 * If missing, the default value for OVP is 35.5V
 	 */
 	pdata->over_voltage_protection = REG_I2C_1_OVP1;
-	if (!of_property_read_u32(node, "mps,overvoltage-protection-microvolt",
-				  &tmp_value)) {
+	ret = device_property_read_u32(dev, "mps,overvoltage-protection-microvolt", &tmp_value);
+	if (!ret) {
 		switch (tmp_value) {
 		case 13500000:
 			pdata->over_voltage_protection = 0x00;
@@ -328,9 +322,7 @@  static int pm3309c_parse_dt_node(struct mp3309c_chip *chip,
 	}
 
 	/* Synchronous (default) and non-synchronous mode */
-	pdata->sync_mode = true;
-	if (of_property_read_bool(node, "mps,no-sync-mode"))
-		pdata->sync_mode = false;
+	pdata->sync_mode = !device_property_read_bool(dev, "mps,no-sync-mode");
 
 	return 0;
 }