| Message ID | 20231215-x1e80100-dts-missing-nodes-v2-2-5a6efc04d00c@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: Add missing nodes to X1E80100 base dtsi and CRD dts | expand |
On 23-12-15 00:35:38, Abel Vesa wrote: > Enable touchscreen, touchpad, keyboard, display, pcie and usb > and all related nodes. Urgh, type in subject. I'll rephrase it anyway in the next version. Please ignore this version. > > Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com> > Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> > Co-developed-by: Rajendra Nayak <quic_rjendra@quicinc.com> > Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 221 ++++++++++++++++++++++++++++++ > 1 file changed, 221 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts > index 7532d8eca2de..d44898453315 100644 > --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts > +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts > @@ -401,10 +401,144 @@ vreg_l3j_0p8: ldo3 { > }; > }; > > +&i2c0 { > + clock-frequency = <400000>; > + > + status = "okay"; > + > + touchpad@15 { > + compatible = "hid-over-i2c"; > + reg = <0x15>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&tpad_default>; > + > + wakeup-source; > + }; > + > + keyboard@3a { > + compatible = "hid-over-i2c"; > + reg = <0x3a>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&kybd_default>; > + wakeup-source; > + }; > +}; > + > +&i2c8 { > + clock-frequency = <400000>; > + > + status = "okay"; > + > + touchscreen@10 { > + compatible = "hid-over-i2c"; > + reg = <0x10>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&ts0_default>; > + }; > +}; > + > +&mdss { > + status = "okay"; > +}; > + > +&mdss_dp3 { > + compatible = "qcom,x1e80100-dp"; > + /delete-property/ #sound-dai-cells; > + > + data-lanes = <0 1 2 3>; > + > + status = "okay"; > + > + aux-bus { > + panel { > + compatible = "edp-panel"; > + power-supply = <&vreg_edp_3p3>; > + > + port { > + edp_panel_in: endpoint { > + remote-endpoint = <&mdss_dp3_out>; > + }; > + }; > + }; > + }; > + > + ports { > + port@1 { > + reg = <1>; > + mdss_dp3_out: endpoint { > + remote-endpoint = <&edp_panel_in>; > + }; > + }; > + }; > +}; > + > +&mdss_dp3_phy { > + vdda-phy-supply = <&vreg_l3j_0p8>; > + vdda-pll-supply = <&vreg_l2j_1p2>; > + > + status = "okay"; > +}; > + > +&pcie4 { > + status = "okay"; > +}; > + > +&pcie4_phy { > + vdda-phy-supply = <&vreg_l3j_0p8>; > + vdda-pll-supply = <&vreg_l3e_1p2>; > + > + status = "okay"; > +}; > + > +&pcie6a { > + status = "okay"; > +}; > + > +&pcie6a_phy { > + vdda-phy-supply = <&vreg_l3j_0p8>; > + vdda-pll-supply = <&vreg_l2j_1p2>; > + > + status = "okay"; > +}; > + > +&qupv3_0 { > + status = "okay"; > +}; > + > +&qupv3_1 { > + status = "okay"; > +}; > + > &qupv3_2 { > status = "okay"; > }; > > +&remoteproc_adsp { > + firmware-name = "qcom/x1e80100/adsp.mbn", > + "qcom/x1e80100/adsp_dtb.mbn"; > + > + status = "okay"; > +}; > + > +&remoteproc_cdsp { > + firmware-name = "qcom/x1e80100/cdsp.mbn", > + "qcom/x1e80100/cdsp_dtb.mbn"; > + > + status = "okay"; > +}; > + > &tlmm { > gpio-reserved-ranges = <34 2>, /* Unused */ > <44 4>, /* SPI (TPM) */ > @@ -416,9 +550,96 @@ edp_reg_en: edp-reg-en-state { > drive-strength = <16>; > bias-disable; > }; > + > + kybd_default: kybd-default-state { > + pins = "gpio67"; > + function = "gpio"; > + bias-disable; > + }; > + > + tpad_default: tpad-default-state { > + pins = "gpio3"; > + function = "gpio"; > + bias-disable; > + }; > + > + ts0_default: ts0-default-state { > + int-n-pins { > + pins = "gpio51"; > + function = "gpio"; > + bias-disable; > + }; > + > + reset-n-pins { > + pins = "gpio48"; > + function = "gpio"; > + output-high; > + drive-strength = <16>; > + }; > + }; > }; > > &uart21 { > compatible = "qcom,geni-debug-uart"; > status = "okay"; > }; > + > +&usb_1_ss0_hsphy { > + vdd-supply = <&vreg_l2e_0p8>; > + vdda12-supply = <&vreg_l3e_1p2>; > + > + status = "okay"; > +}; > + > +&usb_1_ss0_qmpphy { > + status = "okay"; > +}; > + > +&usb_1_ss0 { > + status = "okay"; > +}; > + > +&usb_1_ss0_dwc3 { > + dr_mode = "host"; > + usb-role-switch; > +}; > + > +&usb_1_ss1_hsphy { > + vdd-supply = <&vreg_l2e_0p8>; > + vdda12-supply = <&vreg_l3e_1p2>; > + > + status = "okay"; > +}; > + > +&usb_1_ss1_qmpphy { > + status = "okay"; > +}; > + > +&usb_1_ss1 { > + status = "okay"; > +}; > + > +&usb_1_ss1_dwc3 { > + dr_mode = "host"; > + usb-role-switch; > +}; > + > +&usb_1_ss2_hsphy { > + vdd-supply = <&vreg_l2e_0p8>; > + vdda12-supply = <&vreg_l3e_1p2>; > + > + status = "okay"; > +}; > + > +&usb_1_ss2_qmpphy { > + status = "okay"; > +}; > + > +&usb_1_ss2 { > + status = "okay"; > +}; > + > +&usb_1_ss2_dwc3 { > + dr_mode = "host"; > + usb-role-switch; > +}; > > -- > 2.34.1 >
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index 7532d8eca2de..d44898453315 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -401,10 +401,144 @@ vreg_l3j_0p8: ldo3 { }; }; +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; + wakeup-source; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + data-lanes = <0 1 2 3>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_dp3_out: endpoint { + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + &qupv3_2 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/adsp.mbn", + "qcom/x1e80100/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/cdsp.mbn", + "qcom/x1e80100/cdsp_dtb.mbn"; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <34 2>, /* Unused */ <44 4>, /* SPI (TPM) */ @@ -416,9 +550,96 @@ edp_reg_en: edp-reg-en-state { drive-strength = <16>; bias-disable; }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; + + ts0_default: ts0-default-state { + int-n-pins { + pins = "gpio51"; + function = "gpio"; + bias-disable; + }; + + reset-n-pins { + pins = "gpio48"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; }; &uart21 { compatible = "qcom,geni-debug-uart"; status = "okay"; }; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; + usb-role-switch; +}; + +&usb_1_ss2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1_ss2_qmpphy { + status = "okay"; +}; + +&usb_1_ss2 { + status = "okay"; +}; + +&usb_1_ss2_dwc3 { + dr_mode = "host"; + usb-role-switch; +};