| Message ID | 20231002-sc7280-venus-pas-v2-2-bd2408891317@fairphone.com |
|---|---|
| State | New |
| Headers | show |
| Series | Enable venus on Fairphone 5 / non-ChromeOS sc7280 venus support | expand |
On 10/2/2023 7:50 PM, Luca Weiss wrote: > If the video-firmware node is present, the venus driver assumes we're on > a system that doesn't use TZ for starting venus, like on ChromeOS > devices. > > Move the video-firmware node to chrome-common.dtsi so we can use venus > on a non-ChromeOS devices. > > At the same time also disable the venus node by default in the dtsi, > like it's done on other SoCs. > > Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > --- > arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 8 ++++++++ > arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++---- > 2 files changed, 10 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > index 5d462ae14ba1..cd491e46666d 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > @@ -104,6 +104,14 @@ &scm { > dma-coherent; > }; > > +&venus { > + status = "okay"; > + > + video-firmware { > + iommus = <&apps_smmu 0x21a2 0x0>; > + }; > +}; > + > &watchdog { > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 66f1eb83cca7..fa53f54d4675 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -3740,6 +3740,8 @@ venus: video-codec@aa00000 { > <&apps_smmu 0x2184 0x20>; > memory-region = <&video_mem>; > > + status = "disabled"; > + > video-decoder { > compatible = "venus-decoder"; > }; > @@ -3748,10 +3750,6 @@ video-encoder { > compatible = "venus-encoder"; > }; > > - video-firmware { > - iommus = <&apps_smmu 0x21a2 0x0>; > - }; > - > venus_opp_table: opp-table { > compatible = "operating-points-v2"; > > Changes look good. Is this tested on SC7280 ? Regards, Vikash
On 11/22/2023 7:50 PM, Luca Weiss wrote: > On Wed Nov 22, 2023 at 2:17 PM CET, Vikash Garodia wrote: >> >> On 10/2/2023 7:50 PM, Luca Weiss wrote: >>> If the video-firmware node is present, the venus driver assumes we're on >>> a system that doesn't use TZ for starting venus, like on ChromeOS >>> devices. >>> >>> Move the video-firmware node to chrome-common.dtsi so we can use venus >>> on a non-ChromeOS devices. >>> >>> At the same time also disable the venus node by default in the dtsi, >>> like it's done on other SoCs. >>> >>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> >>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> >>> --- >>> arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 8 ++++++++ >>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++---- >>> 2 files changed, 10 insertions(+), 4 deletions(-) >>> >>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi >>> index 5d462ae14ba1..cd491e46666d 100644 >>> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi >>> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi >>> @@ -104,6 +104,14 @@ &scm { >>> dma-coherent; >>> }; >>> >>> +&venus { >>> + status = "okay"; >>> + >>> + video-firmware { >>> + iommus = <&apps_smmu 0x21a2 0x0>; >>> + }; >>> +}; >>> + >>> &watchdog { >>> status = "okay"; >>> }; >>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi >>> index 66f1eb83cca7..fa53f54d4675 100644 >>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi >>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi >>> @@ -3740,6 +3740,8 @@ venus: video-codec@aa00000 { >>> <&apps_smmu 0x2184 0x20>; 0x2184 is a secure SID. I think qcm6490-fairphone-fp5.dts needs to override the iommus property as well to retain only the non secure SID i.e 0x2180 ? I am seeing below crash Call trace: [ 47.663593] qcom_smmu_write_s2cr+0x64/0xa4 [ 47.663616] arm_smmu_attach_dev+0x120/0x284 [ 47.663647] __iommu_attach_device+0x24/0xf8 [ 47.676845] __iommu_device_set_domain+0x70/0xd0 [ 47.681632] __iommu_group_set_domain_internal+0x60/0x1b4 [ 47.687218] iommu_setup_default_domain+0x358/0x418 [ 47.692258] __iommu_probe_device+0x3e4/0x404 Could you please reconfirm if Video SID 0x2184 (and mask) is allowed by the qcm6490-fairphone-fp5 hardware having TZ ? >>> memory-region = <&video_mem>; >>> >>> + status = "disabled"; >>> + >>> video-decoder { >>> compatible = "venus-decoder"; >>> }; >>> @@ -3748,10 +3750,6 @@ video-encoder { >>> compatible = "venus-encoder"; >>> }; >>> >>> - video-firmware { >>> - iommus = <&apps_smmu 0x21a2 0x0>; >>> - }; >>> - >>> venus_opp_table: opp-table { >>> compatible = "operating-points-v2"; >>> >>> >> Changes look good. Is this tested on SC7280 ? > > Hi Vikash, > > I didn't test it myself on sc7280 (just qcm6490-fp5) but dtx_diff > reports no differences except for status = okay property being added, so > there should be no change on those boards. See below. > > Regards > Luca I tested on SC7280 (herobrine) and all good. Regards, Vikash
On Fri Nov 24, 2023 at 7:38 AM CET, Vikash Garodia wrote: > > On 11/22/2023 7:50 PM, Luca Weiss wrote: > > On Wed Nov 22, 2023 at 2:17 PM CET, Vikash Garodia wrote: > >> > >> On 10/2/2023 7:50 PM, Luca Weiss wrote: > >>> If the video-firmware node is present, the venus driver assumes we're on > >>> a system that doesn't use TZ for starting venus, like on ChromeOS > >>> devices. > >>> > >>> Move the video-firmware node to chrome-common.dtsi so we can use venus > >>> on a non-ChromeOS devices. > >>> > >>> At the same time also disable the venus node by default in the dtsi, > >>> like it's done on other SoCs. > >>> > >>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > >>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > >>> --- > >>> arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 8 ++++++++ > >>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++---- > >>> 2 files changed, 10 insertions(+), 4 deletions(-) > >>> > >>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > >>> index 5d462ae14ba1..cd491e46666d 100644 > >>> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > >>> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > >>> @@ -104,6 +104,14 @@ &scm { > >>> dma-coherent; > >>> }; > >>> > >>> +&venus { > >>> + status = "okay"; > >>> + > >>> + video-firmware { > >>> + iommus = <&apps_smmu 0x21a2 0x0>; > >>> + }; > >>> +}; > >>> + > >>> &watchdog { > >>> status = "okay"; > >>> }; > >>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > >>> index 66f1eb83cca7..fa53f54d4675 100644 > >>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > >>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > >>> @@ -3740,6 +3740,8 @@ venus: video-codec@aa00000 { > >>> <&apps_smmu 0x2184 0x20>; > 0x2184 is a secure SID. I think qcm6490-fairphone-fp5.dts needs to override the > iommus property as well to retain only the non secure SID i.e 0x2180 ? I am > seeing below crash > > Call trace: > [ 47.663593] qcom_smmu_write_s2cr+0x64/0xa4 > [ 47.663616] arm_smmu_attach_dev+0x120/0x284 > [ 47.663647] __iommu_attach_device+0x24/0xf8 > [ 47.676845] __iommu_device_set_domain+0x70/0xd0 > [ 47.681632] __iommu_group_set_domain_internal+0x60/0x1b4 > [ 47.687218] iommu_setup_default_domain+0x358/0x418 > [ 47.692258] __iommu_probe_device+0x3e4/0x404 > > Could you please reconfirm if Video SID 0x2184 (and mask) is allowed by the > qcm6490-fairphone-fp5 hardware having TZ ? Hi, On FP5 it seems it's no problem to have both SIDs in there, probe and using venus appears to work fine. Are you using different firmware than QCM6490.LA.3.0 on the device where you tested this? > > >>> memory-region = <&video_mem>; > >>> > >>> + status = "disabled"; > >>> + > >>> video-decoder { > >>> compatible = "venus-decoder"; > >>> }; > >>> @@ -3748,10 +3750,6 @@ video-encoder { > >>> compatible = "venus-encoder"; > >>> }; > >>> > >>> - video-firmware { > >>> - iommus = <&apps_smmu 0x21a2 0x0>; > >>> - }; > >>> - > >>> venus_opp_table: opp-table { > >>> compatible = "operating-points-v2"; > >>> > >>> > >> Changes look good. Is this tested on SC7280 ? > > > > Hi Vikash, > > > > I didn't test it myself on sc7280 (just qcm6490-fp5) but dtx_diff > > reports no differences except for status = okay property being added, so > > there should be no change on those boards. See below. > > > > Regards > > Luca > > I tested on SC7280 (herobrine) and all good. Great, thanks! Regards Luca > > Regards, > Vikash
On 11/24/2023 5:05 PM, Luca Weiss wrote: > On Fri Nov 24, 2023 at 7:38 AM CET, Vikash Garodia wrote: >> >> On 11/22/2023 7:50 PM, Luca Weiss wrote: >>> On Wed Nov 22, 2023 at 2:17 PM CET, Vikash Garodia wrote: >>>> >>>> On 10/2/2023 7:50 PM, Luca Weiss wrote: >>>>> If the video-firmware node is present, the venus driver assumes we're on >>>>> a system that doesn't use TZ for starting venus, like on ChromeOS >>>>> devices. >>>>> >>>>> Move the video-firmware node to chrome-common.dtsi so we can use venus >>>>> on a non-ChromeOS devices. >>>>> >>>>> At the same time also disable the venus node by default in the dtsi, >>>>> like it's done on other SoCs. >>>>> >>>>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> >>>>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> >>>>> --- >>>>> arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 8 ++++++++ >>>>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++---- >>>>> 2 files changed, 10 insertions(+), 4 deletions(-) >>>>> >>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi >>>>> index 5d462ae14ba1..cd491e46666d 100644 >>>>> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi >>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi >>>>> @@ -104,6 +104,14 @@ &scm { >>>>> dma-coherent; >>>>> }; >>>>> >>>>> +&venus { >>>>> + status = "okay"; >>>>> + >>>>> + video-firmware { >>>>> + iommus = <&apps_smmu 0x21a2 0x0>; >>>>> + }; >>>>> +}; >>>>> + >>>>> &watchdog { >>>>> status = "okay"; >>>>> }; >>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi >>>>> index 66f1eb83cca7..fa53f54d4675 100644 >>>>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi >>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi >>>>> @@ -3740,6 +3740,8 @@ venus: video-codec@aa00000 { >>>>> <&apps_smmu 0x2184 0x20>; >> 0x2184 is a secure SID. I think qcm6490-fairphone-fp5.dts needs to override the >> iommus property as well to retain only the non secure SID i.e 0x2180 ? I am >> seeing below crash >> >> Call trace: >> [ 47.663593] qcom_smmu_write_s2cr+0x64/0xa4 >> [ 47.663616] arm_smmu_attach_dev+0x120/0x284 >> [ 47.663647] __iommu_attach_device+0x24/0xf8 >> [ 47.676845] __iommu_device_set_domain+0x70/0xd0 >> [ 47.681632] __iommu_group_set_domain_internal+0x60/0x1b4 >> [ 47.687218] iommu_setup_default_domain+0x358/0x418 >> [ 47.692258] __iommu_probe_device+0x3e4/0x404 >> >> Could you please reconfirm if Video SID 0x2184 (and mask) is allowed by the >> qcm6490-fairphone-fp5 hardware having TZ ? > > Hi, > > On FP5 it seems it's no problem to have both SIDs in there, probe and > using venus appears to work fine. > > Are you using different firmware than QCM6490.LA.3.0 on the device where > you tested this? I was testing this on RB3 board which uses firmware [1]. Regards, Vikash [1] https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/qcom/vpu-2.0 >> >>>>> memory-region = <&video_mem>; >>>>> >>>>> + status = "disabled"; >>>>> + >>>>> video-decoder { >>>>> compatible = "venus-decoder"; >>>>> }; >>>>> @@ -3748,10 +3750,6 @@ video-encoder { >>>>> compatible = "venus-encoder"; >>>>> }; >>>>> >>>>> - video-firmware { >>>>> - iommus = <&apps_smmu 0x21a2 0x0>; >>>>> - }; >>>>> - >>>>> venus_opp_table: opp-table { >>>>> compatible = "operating-points-v2"; >>>>> >>>>> >>>> Changes look good. Is this tested on SC7280 ? >>> >>> Hi Vikash, >>> >>> I didn't test it myself on sc7280 (just qcm6490-fp5) but dtx_diff >>> reports no differences except for status = okay property being added, so >>> there should be no change on those boards. See below. >>> >>> Regards >>> Luca >> >> I tested on SC7280 (herobrine) and all good. > > Great, thanks! > > Regards > Luca > >> >> Regards, >> Vikash >
On Fri, 24 Nov 2023 at 14:30, Vikash Garodia <quic_vgarodia@quicinc.com> wrote: > > On 11/24/2023 5:05 PM, Luca Weiss wrote: > > On Fri Nov 24, 2023 at 7:38 AM CET, Vikash Garodia wrote: > >> > >> On 11/22/2023 7:50 PM, Luca Weiss wrote: > >>> On Wed Nov 22, 2023 at 2:17 PM CET, Vikash Garodia wrote: > >>>> > >>>> On 10/2/2023 7:50 PM, Luca Weiss wrote: > >>>>> If the video-firmware node is present, the venus driver assumes we're on > >>>>> a system that doesn't use TZ for starting venus, like on ChromeOS > >>>>> devices. > >>>>> > >>>>> Move the video-firmware node to chrome-common.dtsi so we can use venus > >>>>> on a non-ChromeOS devices. > >>>>> > >>>>> At the same time also disable the venus node by default in the dtsi, > >>>>> like it's done on other SoCs. > >>>>> > >>>>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > >>>>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > >>>>> --- > >>>>> arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 8 ++++++++ > >>>>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++---- > >>>>> 2 files changed, 10 insertions(+), 4 deletions(-) > >>>>> > >>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > >>>>> index 5d462ae14ba1..cd491e46666d 100644 > >>>>> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > >>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > >>>>> @@ -104,6 +104,14 @@ &scm { > >>>>> dma-coherent; > >>>>> }; > >>>>> > >>>>> +&venus { > >>>>> + status = "okay"; > >>>>> + > >>>>> + video-firmware { > >>>>> + iommus = <&apps_smmu 0x21a2 0x0>; > >>>>> + }; > >>>>> +}; > >>>>> + > >>>>> &watchdog { > >>>>> status = "okay"; > >>>>> }; > >>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > >>>>> index 66f1eb83cca7..fa53f54d4675 100644 > >>>>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > >>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > >>>>> @@ -3740,6 +3740,8 @@ venus: video-codec@aa00000 { > >>>>> <&apps_smmu 0x2184 0x20>; > >> 0x2184 is a secure SID. I think qcm6490-fairphone-fp5.dts needs to override the > >> iommus property as well to retain only the non secure SID i.e 0x2180 ? I am > >> seeing below crash > >> > >> Call trace: > >> [ 47.663593] qcom_smmu_write_s2cr+0x64/0xa4 > >> [ 47.663616] arm_smmu_attach_dev+0x120/0x284 > >> [ 47.663647] __iommu_attach_device+0x24/0xf8 > >> [ 47.676845] __iommu_device_set_domain+0x70/0xd0 > >> [ 47.681632] __iommu_group_set_domain_internal+0x60/0x1b4 > >> [ 47.687218] iommu_setup_default_domain+0x358/0x418 > >> [ 47.692258] __iommu_probe_device+0x3e4/0x404 > >> > >> Could you please reconfirm if Video SID 0x2184 (and mask) is allowed by the > >> qcm6490-fairphone-fp5 hardware having TZ ? > > > > Hi, > > > > On FP5 it seems it's no problem to have both SIDs in there, probe and > > using venus appears to work fine. > > > > Are you using different firmware than QCM6490.LA.3.0 on the device where > > you tested this? > I was testing this on RB3 board which uses firmware [1]. There is something wrong here. RB3 board uses venus-5.2 RB5 board uses vpu-1.0 Only sc7280 uses vpu-2.0 > > Regards, > Vikash > > [1] > https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/qcom/vpu-2.0 > > >> > >>>>> memory-region = <&video_mem>; > >>>>> > >>>>> + status = "disabled"; > >>>>> + > >>>>> video-decoder { > >>>>> compatible = "venus-decoder"; > >>>>> }; > >>>>> @@ -3748,10 +3750,6 @@ video-encoder { > >>>>> compatible = "venus-encoder"; > >>>>> }; > >>>>> > >>>>> - video-firmware { > >>>>> - iommus = <&apps_smmu 0x21a2 0x0>; > >>>>> - }; > >>>>> - > >>>>> venus_opp_table: opp-table { > >>>>> compatible = "operating-points-v2"; > >>>>> > >>>>> > >>>> Changes look good. Is this tested on SC7280 ? > >>> > >>> Hi Vikash, > >>> > >>> I didn't test it myself on sc7280 (just qcm6490-fp5) but dtx_diff > >>> reports no differences except for status = okay property being added, so > >>> there should be no change on those boards. See below. > >>> > >>> Regards > >>> Luca > >> > >> I tested on SC7280 (herobrine) and all good. > > > > Great, thanks! > > > > Regards > > Luca > > > >> > >> Regards, > >> Vikash > > >
On 11/24/2023 6:23 PM, Dmitry Baryshkov wrote: > On Fri, 24 Nov 2023 at 14:30, Vikash Garodia <quic_vgarodia@quicinc.com> wrote: >> >> On 11/24/2023 5:05 PM, Luca Weiss wrote: >>> On Fri Nov 24, 2023 at 7:38 AM CET, Vikash Garodia wrote: >>>> >>>> On 11/22/2023 7:50 PM, Luca Weiss wrote: >>>>> On Wed Nov 22, 2023 at 2:17 PM CET, Vikash Garodia wrote: >>>>>> >>>>>> On 10/2/2023 7:50 PM, Luca Weiss wrote: >>>>>>> If the video-firmware node is present, the venus driver assumes we're on >>>>>>> a system that doesn't use TZ for starting venus, like on ChromeOS >>>>>>> devices. >>>>>>> >>>>>>> Move the video-firmware node to chrome-common.dtsi so we can use venus >>>>>>> on a non-ChromeOS devices. >>>>>>> >>>>>>> At the same time also disable the venus node by default in the dtsi, >>>>>>> like it's done on other SoCs. >>>>>>> >>>>>>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> >>>>>>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> >>>>>>> --- >>>>>>> arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 8 ++++++++ >>>>>>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++---- >>>>>>> 2 files changed, 10 insertions(+), 4 deletions(-) >>>>>>> >>>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi >>>>>>> index 5d462ae14ba1..cd491e46666d 100644 >>>>>>> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi >>>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi >>>>>>> @@ -104,6 +104,14 @@ &scm { >>>>>>> dma-coherent; >>>>>>> }; >>>>>>> >>>>>>> +&venus { >>>>>>> + status = "okay"; >>>>>>> + >>>>>>> + video-firmware { >>>>>>> + iommus = <&apps_smmu 0x21a2 0x0>; >>>>>>> + }; >>>>>>> +}; >>>>>>> + >>>>>>> &watchdog { >>>>>>> status = "okay"; >>>>>>> }; >>>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi >>>>>>> index 66f1eb83cca7..fa53f54d4675 100644 >>>>>>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi >>>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi >>>>>>> @@ -3740,6 +3740,8 @@ venus: video-codec@aa00000 { >>>>>>> <&apps_smmu 0x2184 0x20>; >>>> 0x2184 is a secure SID. I think qcm6490-fairphone-fp5.dts needs to override the >>>> iommus property as well to retain only the non secure SID i.e 0x2180 ? I am >>>> seeing below crash >>>> >>>> Call trace: >>>> [ 47.663593] qcom_smmu_write_s2cr+0x64/0xa4 >>>> [ 47.663616] arm_smmu_attach_dev+0x120/0x284 >>>> [ 47.663647] __iommu_attach_device+0x24/0xf8 >>>> [ 47.676845] __iommu_device_set_domain+0x70/0xd0 >>>> [ 47.681632] __iommu_group_set_domain_internal+0x60/0x1b4 >>>> [ 47.687218] iommu_setup_default_domain+0x358/0x418 >>>> [ 47.692258] __iommu_probe_device+0x3e4/0x404 >>>> >>>> Could you please reconfirm if Video SID 0x2184 (and mask) is allowed by the >>>> qcm6490-fairphone-fp5 hardware having TZ ? >>> >>> Hi, >>> >>> On FP5 it seems it's no problem to have both SIDs in there, probe and >>> using venus appears to work fine. >>> >>> Are you using different firmware than QCM6490.LA.3.0 on the device where >>> you tested this? >> I was testing this on RB3 board which uses firmware [1]. > > There is something wrong here. > > RB3 board uses venus-5.2 > RB5 board uses vpu-1.0 > Only sc7280 uses vpu-2.0 Tested on QCM6490 IDP board, which is QCOM internal board similar to RB3 gen2. >> >> Regards, >> Vikash >> >> [1] >> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/qcom/vpu-2.0 >> >>>> >>>>>>> memory-region = <&video_mem>; >>>>>>> >>>>>>> + status = "disabled"; >>>>>>> + >>>>>>> video-decoder { >>>>>>> compatible = "venus-decoder"; >>>>>>> }; >>>>>>> @@ -3748,10 +3750,6 @@ video-encoder { >>>>>>> compatible = "venus-encoder"; >>>>>>> }; >>>>>>> >>>>>>> - video-firmware { >>>>>>> - iommus = <&apps_smmu 0x21a2 0x0>; >>>>>>> - }; >>>>>>> - >>>>>>> venus_opp_table: opp-table { >>>>>>> compatible = "operating-points-v2"; >>>>>>> >>>>>>> >>>>>> Changes look good. Is this tested on SC7280 ? >>>>> >>>>> Hi Vikash, >>>>> >>>>> I didn't test it myself on sc7280 (just qcm6490-fp5) but dtx_diff >>>>> reports no differences except for status = okay property being added, so >>>>> there should be no change on those boards. See below. >>>>> >>>>> Regards >>>>> Luca >>>> >>>> I tested on SC7280 (herobrine) and all good. >>> >>> Great, thanks! >>> >>> Regards >>> Luca >>> >>>> >>>> Regards, >>>> Vikash >>> >> > >
On Fri Nov 24, 2023 at 2:35 PM CET, Vikash Garodia wrote: > > > On 11/24/2023 6:23 PM, Dmitry Baryshkov wrote: > > On Fri, 24 Nov 2023 at 14:30, Vikash Garodia <quic_vgarodia@quicinc.com> wrote: > >> > >> On 11/24/2023 5:05 PM, Luca Weiss wrote: > >>> On Fri Nov 24, 2023 at 7:38 AM CET, Vikash Garodia wrote: > >>>> > >>>> On 11/22/2023 7:50 PM, Luca Weiss wrote: > >>>>> On Wed Nov 22, 2023 at 2:17 PM CET, Vikash Garodia wrote: > >>>>>> > >>>>>> On 10/2/2023 7:50 PM, Luca Weiss wrote: > >>>>>>> If the video-firmware node is present, the venus driver assumes we're on > >>>>>>> a system that doesn't use TZ for starting venus, like on ChromeOS > >>>>>>> devices. > >>>>>>> > >>>>>>> Move the video-firmware node to chrome-common.dtsi so we can use venus > >>>>>>> on a non-ChromeOS devices. > >>>>>>> > >>>>>>> At the same time also disable the venus node by default in the dtsi, > >>>>>>> like it's done on other SoCs. > >>>>>>> > >>>>>>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > >>>>>>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > >>>>>>> --- > >>>>>>> arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 8 ++++++++ > >>>>>>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++---- > >>>>>>> 2 files changed, 10 insertions(+), 4 deletions(-) > >>>>>>> > >>>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > >>>>>>> index 5d462ae14ba1..cd491e46666d 100644 > >>>>>>> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > >>>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > >>>>>>> @@ -104,6 +104,14 @@ &scm { > >>>>>>> dma-coherent; > >>>>>>> }; > >>>>>>> > >>>>>>> +&venus { > >>>>>>> + status = "okay"; > >>>>>>> + > >>>>>>> + video-firmware { > >>>>>>> + iommus = <&apps_smmu 0x21a2 0x0>; > >>>>>>> + }; > >>>>>>> +}; > >>>>>>> + > >>>>>>> &watchdog { > >>>>>>> status = "okay"; > >>>>>>> }; > >>>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > >>>>>>> index 66f1eb83cca7..fa53f54d4675 100644 > >>>>>>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > >>>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > >>>>>>> @@ -3740,6 +3740,8 @@ venus: video-codec@aa00000 { > >>>>>>> <&apps_smmu 0x2184 0x20>; > >>>> 0x2184 is a secure SID. I think qcm6490-fairphone-fp5.dts needs to override the > >>>> iommus property as well to retain only the non secure SID i.e 0x2180 ? I am > >>>> seeing below crash > >>>> > >>>> Call trace: > >>>> [ 47.663593] qcom_smmu_write_s2cr+0x64/0xa4 > >>>> [ 47.663616] arm_smmu_attach_dev+0x120/0x284 > >>>> [ 47.663647] __iommu_attach_device+0x24/0xf8 > >>>> [ 47.676845] __iommu_device_set_domain+0x70/0xd0 > >>>> [ 47.681632] __iommu_group_set_domain_internal+0x60/0x1b4 > >>>> [ 47.687218] iommu_setup_default_domain+0x358/0x418 > >>>> [ 47.692258] __iommu_probe_device+0x3e4/0x404 > >>>> > >>>> Could you please reconfirm if Video SID 0x2184 (and mask) is allowed by the > >>>> qcm6490-fairphone-fp5 hardware having TZ ? > >>> > >>> Hi, > >>> > >>> On FP5 it seems it's no problem to have both SIDs in there, probe and > >>> using venus appears to work fine. > >>> > >>> Are you using different firmware than QCM6490.LA.3.0 on the device where > >>> you tested this? > >> I was testing this on RB3 board which uses firmware [1]. > > > > There is something wrong here. > > > > RB3 board uses venus-5.2 > > RB5 board uses vpu-1.0 > > Only sc7280 uses vpu-2.0 > > Tested on QCM6490 IDP board, which is QCOM internal board similar to RB3 gen2. In any case, I don't know much about the venus & iommu setup here. I can try removing the 0x2184 SID and test if venus still works on FP5. Also should the chromebooks keep that iommu entry or not? Regards Luca > > >> > >> Regards, > >> Vikash > >> > >> [1] > >> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/qcom/vpu-2.0 > >> > >>>> > >>>>>>> memory-region = <&video_mem>; > >>>>>>> > >>>>>>> + status = "disabled"; > >>>>>>> + > >>>>>>> video-decoder { > >>>>>>> compatible = "venus-decoder"; > >>>>>>> }; > >>>>>>> @@ -3748,10 +3750,6 @@ video-encoder { > >>>>>>> compatible = "venus-encoder"; > >>>>>>> }; > >>>>>>> > >>>>>>> - video-firmware { > >>>>>>> - iommus = <&apps_smmu 0x21a2 0x0>; > >>>>>>> - }; > >>>>>>> - > >>>>>>> venus_opp_table: opp-table { > >>>>>>> compatible = "operating-points-v2"; > >>>>>>> > >>>>>>> > >>>>>> Changes look good. Is this tested on SC7280 ? > >>>>> > >>>>> Hi Vikash, > >>>>> > >>>>> I didn't test it myself on sc7280 (just qcm6490-fp5) but dtx_diff > >>>>> reports no differences except for status = okay property being added, so > >>>>> there should be no change on those boards. See below. > >>>>> > >>>>> Regards > >>>>> Luca > >>>> > >>>> I tested on SC7280 (herobrine) and all good. > >>> > >>> Great, thanks! > >>> > >>> Regards > >>> Luca > >>> > >>>> > >>>> Regards, > >>>> Vikash > >>> > >> > > > >
On Tue Nov 28, 2023 at 9:14 AM CET, Vikash Garodia wrote: > > On 11/24/2023 9:26 PM, Luca Weiss wrote: > > On Fri Nov 24, 2023 at 2:35 PM CET, Vikash Garodia wrote: > >> > >> > >> On 11/24/2023 6:23 PM, Dmitry Baryshkov wrote: > >>> On Fri, 24 Nov 2023 at 14:30, Vikash Garodia <quic_vgarodia@quicinc.com> wrote: > >>>> > >>>> On 11/24/2023 5:05 PM, Luca Weiss wrote: > >>>>> On Fri Nov 24, 2023 at 7:38 AM CET, Vikash Garodia wrote: > >>>>>> > >>>>>> On 11/22/2023 7:50 PM, Luca Weiss wrote: > >>>>>>> On Wed Nov 22, 2023 at 2:17 PM CET, Vikash Garodia wrote: > >>>>>>>> > >>>>>>>> On 10/2/2023 7:50 PM, Luca Weiss wrote: > >>>>>>>>> If the video-firmware node is present, the venus driver assumes we're on > >>>>>>>>> a system that doesn't use TZ for starting venus, like on ChromeOS > >>>>>>>>> devices. > >>>>>>>>> > >>>>>>>>> Move the video-firmware node to chrome-common.dtsi so we can use venus > >>>>>>>>> on a non-ChromeOS devices. > >>>>>>>>> > >>>>>>>>> At the same time also disable the venus node by default in the dtsi, > >>>>>>>>> like it's done on other SoCs. > >>>>>>>>> > >>>>>>>>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > >>>>>>>>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> > >>>>>>>>> --- > >>>>>>>>> arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 8 ++++++++ > >>>>>>>>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++---- > >>>>>>>>> 2 files changed, 10 insertions(+), 4 deletions(-) > >>>>>>>>> > >>>>>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > >>>>>>>>> index 5d462ae14ba1..cd491e46666d 100644 > >>>>>>>>> --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > >>>>>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi > >>>>>>>>> @@ -104,6 +104,14 @@ &scm { > >>>>>>>>> dma-coherent; > >>>>>>>>> }; > >>>>>>>>> > >>>>>>>>> +&venus { > >>>>>>>>> + status = "okay"; > >>>>>>>>> + > >>>>>>>>> + video-firmware { > >>>>>>>>> + iommus = <&apps_smmu 0x21a2 0x0>; > >>>>>>>>> + }; > >>>>>>>>> +}; > >>>>>>>>> + > >>>>>>>>> &watchdog { > >>>>>>>>> status = "okay"; > >>>>>>>>> }; > >>>>>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > >>>>>>>>> index 66f1eb83cca7..fa53f54d4675 100644 > >>>>>>>>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > >>>>>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > >>>>>>>>> @@ -3740,6 +3740,8 @@ venus: video-codec@aa00000 { > >>>>>>>>> <&apps_smmu 0x2184 0x20>; > >>>>>> 0x2184 is a secure SID. I think qcm6490-fairphone-fp5.dts needs to override the > >>>>>> iommus property as well to retain only the non secure SID i.e 0x2180 ? I am > >>>>>> seeing below crash > >>>>>> > >>>>>> Call trace: > >>>>>> [ 47.663593] qcom_smmu_write_s2cr+0x64/0xa4 > >>>>>> [ 47.663616] arm_smmu_attach_dev+0x120/0x284 > >>>>>> [ 47.663647] __iommu_attach_device+0x24/0xf8 > >>>>>> [ 47.676845] __iommu_device_set_domain+0x70/0xd0 > >>>>>> [ 47.681632] __iommu_group_set_domain_internal+0x60/0x1b4 > >>>>>> [ 47.687218] iommu_setup_default_domain+0x358/0x418 > >>>>>> [ 47.692258] __iommu_probe_device+0x3e4/0x404 > >>>>>> > >>>>>> Could you please reconfirm if Video SID 0x2184 (and mask) is allowed by the > >>>>>> qcm6490-fairphone-fp5 hardware having TZ ? > >>>>> > >>>>> Hi, > >>>>> > >>>>> On FP5 it seems it's no problem to have both SIDs in there, probe and > >>>>> using venus appears to work fine. > >>>>> > >>>>> Are you using different firmware than QCM6490.LA.3.0 on the device where > >>>>> you tested this? > >>>> I was testing this on RB3 board which uses firmware [1]. > >>> > >>> There is something wrong here. > >>> > >>> RB3 board uses venus-5.2 > >>> RB5 board uses vpu-1.0 > >>> Only sc7280 uses vpu-2.0 > >> > >> Tested on QCM6490 IDP board, which is QCOM internal board similar to RB3 gen2. > > > > In any case, I don't know much about the venus & iommu setup here. I can > > try removing the 0x2184 SID and test if venus still works on FP5. > > Please remove 0x2184 SID and confirm specifically encoder works. This SID is for > encoder. > > > Also should the chromebooks keep that iommu entry or not? > Chrome-common can have 0x2184 since its no-TZ based solution. So in sc7280.dtsi, > you can keep the default SID i.e 0x2180 (with respective mask) and in > chrome-common, we can override the iommus property with 0x2180 and 0x2184. Hi Vikash, I'm moving 0x2184 to chrome-common in v3 but I couldn't test venus encoding myself since I just don't know *how* to test it. Would be nice if you could share how you test venus (decoding & encoding) since seemingly nobody (at least in the postmarketOS community) seems to know how to test/use it properly. See also https://wiki.postmarketos.org/wiki/Hardware_video_acceleration Regards Luca > > Regards, > Vikash > > > Regards > > Luca > > > >> > >>>> > >>>> Regards, > >>>> Vikash > >>>> > >>>> [1] > >>>> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/qcom/vpu-2.0 > >>>> > >>>>>> > >>>>>>>>> memory-region = <&video_mem>; > >>>>>>>>> > >>>>>>>>> + status = "disabled"; > >>>>>>>>> + > >>>>>>>>> video-decoder { > >>>>>>>>> compatible = "venus-decoder"; > >>>>>>>>> }; > >>>>>>>>> @@ -3748,10 +3750,6 @@ video-encoder { > >>>>>>>>> compatible = "venus-encoder"; > >>>>>>>>> }; > >>>>>>>>> > >>>>>>>>> - video-firmware { > >>>>>>>>> - iommus = <&apps_smmu 0x21a2 0x0>; > >>>>>>>>> - }; > >>>>>>>>> - > >>>>>>>>> venus_opp_table: opp-table { > >>>>>>>>> compatible = "operating-points-v2"; > >>>>>>>>> > >>>>>>>>> > >>>>>>>> Changes look good. Is this tested on SC7280 ? > >>>>>>> > >>>>>>> Hi Vikash, > >>>>>>> > >>>>>>> I didn't test it myself on sc7280 (just qcm6490-fp5) but dtx_diff > >>>>>>> reports no differences except for status = okay property being added, so > >>>>>>> there should be no change on those boards. See below. > >>>>>>> > >>>>>>> Regards > >>>>>>> Luca > >>>>>> > >>>>>> I tested on SC7280 (herobrine) and all good. > >>>>> > >>>>> Great, thanks! > >>>>> > >>>>> Regards > >>>>> Luca > >>>>> > >>>>>> > >>>>>> Regards, > >>>>>> Vikash > >>>>> > >>>> > >>> > >>> > >
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index 5d462ae14ba1..cd491e46666d 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -104,6 +104,14 @@ &scm { dma-coherent; }; +&venus { + status = "okay"; + + video-firmware { + iommus = <&apps_smmu 0x21a2 0x0>; + }; +}; + &watchdog { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 66f1eb83cca7..fa53f54d4675 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -3740,6 +3740,8 @@ venus: video-codec@aa00000 { <&apps_smmu 0x2184 0x20>; memory-region = <&video_mem>; + status = "disabled"; + video-decoder { compatible = "venus-decoder"; }; @@ -3748,10 +3750,6 @@ video-encoder { compatible = "venus-encoder"; }; - video-firmware { - iommus = <&apps_smmu 0x21a2 0x0>; - }; - venus_opp_table: opp-table { compatible = "operating-points-v2";