| Message ID | 20231117101817.4401-15-quic_tengfan@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: qcom: add sm8550-aim300 board support | expand |
On 17/11/2023 11:18, Tengfei Fan wrote: > Add the sound card node with tested playback over WSA8845 speakers and > WCD9385 headset over USB Type-C. > > Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 82 ++++++++++++++++++++++ > 1 file changed, 82 insertions(+) > NAK, it's initial submission. Stop useless splitting of work which is done. You cannot have "release late, release often". The rule is: "release early, release often". Best regards, Krzysztof
在 11/17/2023 6:33 PM, Krzysztof Kozlowski 写道: > On 17/11/2023 11:18, Tengfei Fan wrote: >> Add the sound card node with tested playback over WSA8845 speakers and >> WCD9385 headset over USB Type-C. >> >> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 82 ++++++++++++++++++++++ >> 1 file changed, 82 insertions(+) >> > > NAK, it's initial submission. > > Stop useless splitting of work which is done. You cannot have "release > late, release often". The rule is: "release early, release often". > > Best regards, > Krzysztof > Hi Krzysztof, In next version patch series, I'm going to combine all the splited functions into one patch.
diff --git a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts index e7035f57ce44..6dc3040b9f76 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts @@ -107,6 +107,88 @@ }; }; + sound { + compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; + model = "SM8550-AIM300"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "TX DMIC0", "MIC BIAS1", + "TX DMIC1", "MIC BIAS2", + "TX DMIC2", "MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&north_spkr>, <&south_spkr>, + <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr";
Add the sound card node with tested playback over WSA8845 speakers and WCD9385 headset over USB Type-C. Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> --- arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 82 ++++++++++++++++++++++ 1 file changed, 82 insertions(+)