diff mbox series

[v9,4/5] documentation: media: add documentation for Toshiba Visconti Video Input Interface driver

Message ID 20231012071329.2542003-5-yuji2.ishikawa@toshiba.co.jp
State New
Headers show
Series Add Toshiba Visconti Video Input Interface driver | expand

Commit Message

Yuji Ishikawa Oct. 12, 2023, 7:13 a.m. UTC 
Added basic description of Video Input Interface driver of
Toshiba Visconti architecture.
It includes hardware organization, structure of the driver
and description of vendor specific V4L2 controls
to configure the embedded image signal processor.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
---
Changelog v3:
- Newly add documentation to describe SW and HW

Changelog v4:
- no change

Changelog v5:
- no change

Changelog v6:
- add description of CSI2RX subdevice
- add ordering of ioctl(S_FMT) and ioctl(S_EXT_CTRLS)

Changelog v7:
- no change

Changelog v8:
- add usage of V4L2_CTRL_TYPE_VISCONTI_ISP

Changelog v9:
- fix warning: set reference target for keyword V4L2_CTRL_TYPE_VISCONTI_ISP

 .../driver-api/media/drivers/index.rst        |   1 +
 .../media/drivers/visconti-viif.rst           | 462 ++++++++++++++++++
 .../media/v4l/vidioc-g-ext-ctrls.rst          |   4 +
 .../media/v4l/vidioc-queryctrl.rst            |   5 +
 .../media/videodev2.h.rst.exceptions          |   1 +
 5 files changed, 473 insertions(+)
 create mode 100644 Documentation/driver-api/media/drivers/visconti-viif.rst

Comments

Hans Verkuil Nov. 14, 2023, 8:49 a.m. UTC | #1 
On 12/10/2023 09:13, Yuji Ishikawa wrote:
> Added basic description of Video Input Interface driver of
> Toshiba Visconti architecture.
> It includes hardware organization, structure of the driver
> and description of vendor specific V4L2 controls
> to configure the embedded image signal processor.
> 
> Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
> ---
> Changelog v3:
> - Newly add documentation to describe SW and HW
> 
> Changelog v4:
> - no change
> 
> Changelog v5:
> - no change
> 
> Changelog v6:
> - add description of CSI2RX subdevice
> - add ordering of ioctl(S_FMT) and ioctl(S_EXT_CTRLS)
> 
> Changelog v7:
> - no change
> 
> Changelog v8:
> - add usage of V4L2_CTRL_TYPE_VISCONTI_ISP
> 
> Changelog v9:
> - fix warning: set reference target for keyword V4L2_CTRL_TYPE_VISCONTI_ISP
> 
>  .../driver-api/media/drivers/index.rst        |   1 +
>  .../media/drivers/visconti-viif.rst           | 462 ++++++++++++++++++
>  .../media/v4l/vidioc-g-ext-ctrls.rst          |   4 +
>  .../media/v4l/vidioc-queryctrl.rst            |   5 +
>  .../media/videodev2.h.rst.exceptions          |   1 +
>  5 files changed, 473 insertions(+)
>  create mode 100644 Documentation/driver-api/media/drivers/visconti-viif.rst
> 
> diff --git a/Documentation/driver-api/media/drivers/index.rst b/Documentation/driver-api/media/drivers/index.rst
> index c4123a16b5f9..5592bd99ae5c 100644
> --- a/Documentation/driver-api/media/drivers/index.rst
> +++ b/Documentation/driver-api/media/drivers/index.rst
> @@ -24,6 +24,7 @@ Video4Linux (V4L) drivers
>  	sh_mobile_ceu_camera
>  	tuners
>  	vimc-devel
> +	visconti-viif
>  	zoran
>  	ccs/ccs
>  
> diff --git a/Documentation/driver-api/media/drivers/visconti-viif.rst b/Documentation/driver-api/media/drivers/visconti-viif.rst
> new file mode 100644
> index 000000000000..fd2480cbde46
> --- /dev/null
> +++ b/Documentation/driver-api/media/drivers/visconti-viif.rst
> @@ -0,0 +1,462 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +============================================
> +Visconti Video Input Interface (VIIF) Driver
> +============================================
> +
> +Overview
> +========
> +
> +The Visconti VIIF Hardware
> +--------------------------
> +
> +The Visconti Video Input Interface (VIIF) hardware is  a proprietary videocapture device of Toshiba.
> +Following function modules are integrated:
> +
> +* MIPI CSI2 receiver (CSI2RX)
> +* L1 Image Signal Processor (L1ISP)
> +
> +  * Correction, enhancement, adjustment on RAW pictures.
> +
> +* L2 Image Signal Processor (L2ISP)
> +
> +  * Lens distortion correction
> +  * Scaling
> +  * Cropping
> +
> +* Video DMAC
> +
> +  * format picture (RGB, YUV, Grayscale, ...)
> +  * write picture into DRAM
> +
> +Visconti5 SoC has two VIIF hardware instances.
> +
> +software architecture
> +---------------------
> +
> +The Visconti VIIF driver is composed of following components:
> +
> +* (image sensor driver)
> +* MIPI CSI2 receiver subdevice driver
> +
> +  * corresponding to CSI2RX
> +
> +* Visconti ISP subdevice driver
> +
> +  * corresponding to L1ISP, L2ISP (Lens distortion correction, Scaling)
> +
> +* Visconti Capture V4L2 device driver
> +
> +  * corresponding to L2ISP (Cropping) and Video DMAC
> +  * multiple output videobuf queues
> +
> +    * main path0 (RGB, YUV, Grayscale, ...)
> +    * main path1 (RGB, YUV, Grayscale, ...)
> +    * sub path (RAW picture)
> +
> +::
> +
> +  +-----------+      +-----------+     +----------------+       +-------------------------+
> +  | Sensor    |      | CSI2RX    |     | ISP            |       | Capture MAIN PATH0      |
> +  | subdevice | ---- | subdevice | --- | subdevice      | --+-- | V4L2 device             |
> +  | (IMX219)  |      | (CSI2RX)  |     | (L1ISP, L2ISP) |   |   | (L2ISP crop, VideoDMAC) |
> +  +-----------+      +-----------+     +----------------+   |   +-------------------------+
> +                                                            |
> +                                                            |   +-------------------------+
> +                                                            |   | Capture MAIN PATH1      |
> +                                                            +-- | V4L2 device             |
> +                                                            |   | (L2ISP crop, VideoDMAC) |
> +                                                            |   +-------------------------+
> +                                                            |
> +                                                            |   +-------------------------+
> +                                                            |   | Capture SUB PATH        |
> +                                                            +-- | V4L2 device             |
> +                                                                | (VideoDMAC)             |
> +                                                                +-------------------------+
> +
> +
> +The VIIF driver provides following device nodes for Visconti5 SoC:
> +
> +* VIIF0
> +
> +  * /dev/media0
> +  * /dev/video0 (main path0)
> +  * /dev/video1 (main path1)
> +  * /dev/video2 (sub path)
> +
> +* VIIF1
> +
> +  * /dev/media1
> +  * /dev/video3 (main path0)
> +  * /dev/video4 (main path1)
> +  * /dev/video5 (sub path)
> +
> +Use of coherent memory
> +----------------------
> +
> +Visconti5 SoC has two independent DDR SDRAM controllers.
> +Each controller is mapped to 36bit address space.
> +
> +Accelerator bus masters have two paths to access memory;
> +one is directly connected to SDRAM controller,
> +the another is connected via a cache coherency bus
> +which keeps coherency among CPUs.
> +
> +From acclerators and CPUs, the address map is following:

acclerators -> accelerators

> +
> +* 0x0_8000_0000 DDR0 direct access
> +* 0x4_8000_0000 DDR0 coherency bus
> +* 0x8_8000_0000 DDR1 direct access
> +* 0xC_8000_0000 DDR1 coherency bus
> +
> +The base address can be specified with "memory" and "reserved-memory" elements
> +in a device tree description.
> +It's not recommended to mix direct address and coherent address.
> +
> +The Visconti5 VIIF driver always use only direct address to configure Video DMACs of the hardware.
> +This design is to avoid great performance loss at coherency bus caused by massive memory access.
> +You should not put the dma_coherent attribute to viif element in device tree.
> +Cache operations are done automatically by videobuf2 driver.
> +
> +Tested environment
> +------------------
> +
> +The Visconti VIIF driver was tested with following items:
> +
> +* IMX219 image sensor
> +* IMX335 image sensor
> +
> +IOCTLs
> +======
> +
> +Following public IOCTLs are supported
> +
> +* VIDIOC_QUERYCAP
> +* VIDIOC_ENUM_FMT
> +* VIDIOC_TRY_FMT
> +* VIDIOC_S_FMT
> +* VIDIOC_G_FMT
> +* VIDIOC_ENUM_FRAMESIZES
> +* VIDIOC_G_EXT_CTRLS
> +* VIDIOC_S_EXT_CTRLS
> +* VIDIOC_REQBUFS
> +* VIDIOC_QUERYBUF
> +* VIDIOC_QBUF
> +* VIDIOC_EXPBUF
> +* VIDIOC_DQBUF
> +* VIDIOC_CREATE_BUFS
> +* VIDIOC_PREPARE_BUF
> +* VIDIOC_STREAMON
> +* VIDIOC_STREAMOFF

I would not mention these, this is all standard stuff.

The list is also incomplete :-)

> +
> +Vendor specific v4l2 controls
> +(except for V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE and
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE) should be called
> +after ioctl(S_FMT) because setting the frame format may affect
> +valid range of parameters of the controls.

What happens if I do this the other way around? I.e., set a control,
then set the format. Will the control values/ranges be updated automatically?
If not, what will happen if I try to stream?

Generally setting the format should modify all affected controls if
they are no longer matching the format requirements.

> +
> +Vendor specific v4l2 controls
> +=============================
> +
> +.. _V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE:
> +
> +V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE
> +--------------------------------------------
> +
> +This control sets the format to pack multiple RAW pixel values into a word.
> +
> +This control accepts a __u32 value defined as `enum viif_rawpack_mode`.
> +
> +This control should be set before ioctl(S_FMT) and should not be changed after that.

Why not? What happens if I do?

Typically you should be able to make changes to the configuration until the
moment you allocate buffers (VIDIOC_REQBUFS): that locks the configuration into
place and attempts to make changes will return -EBUSY. Until all buffers are
released, then you can make changes again.

> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE
> +--------------------------------------------
> +
> +This control sets L1ISP preprocessing mode for RAW input images.
> +
> +This control accepts a `struct viif_l1_input_mode_config` instance.
> +
> +This control should be set before ioctl(S_FMT) and should not be changed after that.

Same comment here.

> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RGB_TO_Y_COEF:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RGB_TO_Y_COEF
> +-----------------------------------------------
> +
> +This control sets parameters to yield Y value from RGB pixel values.
> +
> +This control accepts a `struct viif_l1_rgb_to_y_coef_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE
> +-----------------------------------------
> +
> +This control sets rules of generating analog gains for each feature in L1ISP.
> +Related features are:
> +
> +* Optical Black Clamp Correction (OBCC)
> +* Defect Pixel Correction (DPC)
> +* RAW Color Noise Reduction (RCNR)
> +* Lens Shading Correction (LSC)
> +* Color matrix correction (MPRO)
> +* Image quality adjustment (VPRO)
> +
> +The base gain is set with V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG control.
> +
> +This control accepts a `struct viif_l1_ag_mode_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG
> +------------------------------------
> +
> +This control sets base analog gain commonly used in L1ISP features.
> +Analog gain for each L1ISP feature is generated
> +from the base analog gain and a configuration via V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE control.
> +
> +This control accepts a `struct viif_l1_ag_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRE:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRE
> +--------------------------------------
> +
> +This controls sets parameters for HDR Expansion feature.
> +
> +This control accepts a `struct viif_l1_hdre_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_EXTRACTION:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_EXTRACTION
> +------------------------------------------------
> +
> +This control sets black level parameters for L1ISP inputs.
> +
> +This control accepts a `struct viif_l1_img_extraction_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_DPC:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_DPC
> +-------------------------------------
> +
> +This control sets parameters for Defect Pixel Correction.
> +
> +This control accepts a `struct viif_l1_dpc_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_PRESET_WHITE_BALANCE:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_PRESET_WHITE_BALANCE
> +------------------------------------------------------
> +
> +This control sets parameters for white balance.
> +
> +This control accepts a `struct viif_l1_preset_white_balance_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RAW_COLOR_NOISE_REDUCTION:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RAW_COLOR_NOISE_REDUCTION
> +-----------------------------------------------------------
> +
> +This control sets parameters for RAW color noise reduction (RCNR) feature.
> +
> +This control accepts a `struct viif_l1_raw_color_noise_reduction_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRS:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRS
> +--------------------------------------
> +
> +This control sets parameters for HDR synthesis.
> +
> +This control accepts a `struct viif_l1_hdrs_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_BLACK_LEVEL_CORRECTION:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_BLACK_LEVEL_CORRECTION
> +--------------------------------------------------------
> +
> +This control sets parameters for black level correction feature.
> +
> +This control accepts a `struct viif_l1_black_level_correction_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_LSC:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_LSC
> +-------------------------------------
> +
> +This control sets parameters for Lens Shading Correction feature.
> +L1ISP supports 2 correction methods:
> +
> +* parabola shading
> +* grid shading
> +
> +This control accepts a `struct viif_l1_lsc_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_MAIN_PROCESS:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_MAIN_PROCESS
> +----------------------------------------------
> +
> +This controls sets parameter for the MAIN PROCESS feature which is composed of:
> +
> +* demosaic
> +* color matrix correction
> +
> +This control accepts a `struct viif_l1_main_process_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AWB:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AWB
> +-------------------------------------
> +
> +This control sets parameter for auto white balance feature.
> +
> +This control accepts a `struct viif_l1_awb_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_LOCK_AWB_GAIN:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_LOCK_AWB_GAIN
> +-------------------------------------------
> +
> +This control requests enable/disable of lock for AWB gain.
> +
> +This control accepts a u32 value; 0 for disable lock, 1 for enable lock.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC
> +--------------------------------------
> +
> +This control sets parameter for HDR Compression feature.
> +
> +This control accepts a `struct viif_l1_hdrc_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC_LTM:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC_LTM
> +------------------------------------------
> +
> +This control sets parameter for HDR Compression Local Tone Mapping feature.
> +
> +This control accepts a `struct viif_l1_hdrc_ltm_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_GAMMA:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_GAMMA
> +---------------------------------------
> +
> +This control sets parameter for gamma correction at L1ISP.
> +
> +This control accepts a `struct viif_l1_gamma_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_QUALITY_ADJUSTMENT:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_QUALITY_ADJUSTMENT
> +--------------------------------------------------------
> +
> +This control sets parameter for VPRO feature which is composed of:
> +
> +* luminance adjustment:
> +
> + * brightness adjustment
> + * linear contrast adjusment
> + * nonlinear contrast adjustment
> + * luminance noise reduction
> + * edge enhancement
> +
> +* chroma adjustment:
> +
> + * chroma suppression
> + * color level adjustment
> + * chroma noise reduction
> + * coring suppression
> + * edge chroma suppression
> + * color noise reduction
> +
> +This control accepts a `struct viif_l1_img_quality_adjustment_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AVG_LUM_GENERATION:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AVG_LUM_GENERATION
> +----------------------------------------------------
> +
> +This control sets parameter for average luminance statistics feature.
> +
> +This control accepts a `struct viif_l1_avg_lum_generation_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_UNDIST:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_UNDIST
> +----------------------------------------
> +
> +This control sets parameter for the lens undistortion feature of L2ISP.
> +Lens undistortion parameters are defined as either or combination of polinomial parameter and grid table.
> +
> +This control accepts a `struct viif_l2_undist_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_ROI:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_ROI
> +-------------------------------------
> +
> +This control sets dimensions of intermediate images and scaling parameter of L2ISP.
> +If you want to crop the output image,
> +you should set crop parameter to the corresponding source pad of the ISP subdevice with media-ctl tool.
> +
> +This control accepts a `struct viif_l2_roi_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_GAMMA:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_GAMMA
> +---------------------------------------
> +
> +This control sets gamma parameter for L2ISP.
> +
> +This control accepts a `struct viif_l2_gamma_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_CALIBRATION_STATUS:
> +
> +V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_CALIBRATION_STATUS
> +----------------------------------------------------
> +
> +This control provides CSI2 receiver calibration status.
> +
> +This control fills a `struct viif_csi2rx_cal_status` instance with current status.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_ERR_STATUS:
> +
> +V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_ERR_STATUS
> +--------------------------------------------
> +
> +This control provides CSI2 receiver error description.
> +
> +This control fills a `struct viif_csi2rx_err_status` instance with accumerated error status.
> +Note that internal accumerated status is cleared after reading.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_GET_LAST_CAPTURE_STATUS:
> +
> +V4L2_CID_VISCONTI_VIIF_GET_LAST_CAPTURE_STATUS
> +----------------------------------------------
> +
> +This control provides status information for the last captured frame.
> +
> +This control fills a `struct viif_l1_info` instance with current status.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_GET_REPORTED_ERRORS:
> +
> +V4L2_CID_VISCONTI_VIIF_GET_REPORTED_ERRORS
> +------------------------------------------
> +
> +This control provides error information since the last read of this control.
> +
> +This control fills a `struct viif_reported_errors` instance with accumerated error status.
> +Note that internal accumerated status is cleared after reading.
> +
> +Structures
> +==========
> +
> +.. kernel-doc:: include/uapi/linux/visconti_viif.h
> +
> diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> index f9f73530a6be..2f0e4f955167 100644
> --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> @@ -295,6 +295,10 @@ still cause this situation.
>        - ``p_av1_film_grain``
>        - A pointer to a struct :c:type:`v4l2_ctrl_av1_film_grain`. Valid if this control is
>          of type ``V4L2_CTRL_TYPE_AV1_FILM_GRAIN``.
> +    * - void *
> +      - ``ptr``
> +      - A pointer to Visconti ISP control specific structure. Valid if this control is
> +        of type ``V4L2_CTRL_TYPE_VISCONTI_ISP``
>      * - void *
>        - ``ptr``
>        - A pointer to a compound type which can be an N-dimensional array
> diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> index 4d38acafe8e1..cd57fac8bbf9 100644
> --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> @@ -549,6 +549,11 @@ See also the examples in :ref:`control`.
>        - n/a
>        - A struct :c:type:`v4l2_ctrl_av1_film_grain`, containing AV1 Film Grain
>          parameters for stateless video decoders.
> +    * - ``V4L2_CTRL_TYPE_VISCONTI_ISP``
> +      - n/a
> +      - n/a
> +      - n/a
> +      - Structs specific for Visconti ISP configuration controls.
>  
>  .. raw:: latex
>  
> diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> index 3e58aac4ef0b..dbab7527445e 100644
> --- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> +++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> @@ -165,6 +165,7 @@ replace symbol V4L2_CTRL_TYPE_AV1_SEQUENCE :c:type:`v4l2_ctrl_type`
>  replace symbol V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY :c:type:`v4l2_ctrl_type`
>  replace symbol V4L2_CTRL_TYPE_AV1_FRAME :c:type:`v4l2_ctrl_type`
>  replace symbol V4L2_CTRL_TYPE_AV1_FILM_GRAIN :c:type:`v4l2_ctrl_type`
> +replace symbol V4L2_CTRL_TYPE_VISCONTI_ISP :c:type:`v4l2_ctrl_type`
>  
>  # V4L2 capability defines
>  replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities

Regards,

	Hans
Sakari Ailus Nov. 22, 2023, 11:40 a.m. UTC | #2 
Hi Yuji,

Thank you for the update and my apologies for not reviewing this properly
earlier. Please see my commens below.

On Thu, Oct 12, 2023 at 04:13:28PM +0900, Yuji Ishikawa wrote:
> Added basic description of Video Input Interface driver of
> Toshiba Visconti architecture.
> It includes hardware organization, structure of the driver
> and description of vendor specific V4L2 controls
> to configure the embedded image signal processor.
> 
> Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
> ---
> Changelog v3:
> - Newly add documentation to describe SW and HW
> 
> Changelog v4:
> - no change
> 
> Changelog v5:
> - no change
> 
> Changelog v6:
> - add description of CSI2RX subdevice
> - add ordering of ioctl(S_FMT) and ioctl(S_EXT_CTRLS)
> 
> Changelog v7:
> - no change
> 
> Changelog v8:
> - add usage of V4L2_CTRL_TYPE_VISCONTI_ISP
> 
> Changelog v9:
> - fix warning: set reference target for keyword V4L2_CTRL_TYPE_VISCONTI_ISP
> 
>  .../driver-api/media/drivers/index.rst        |   1 +
>  .../media/drivers/visconti-viif.rst           | 462 ++++++++++++++++++
>  .../media/v4l/vidioc-g-ext-ctrls.rst          |   4 +
>  .../media/v4l/vidioc-queryctrl.rst            |   5 +
>  .../media/videodev2.h.rst.exceptions          |   1 +
>  5 files changed, 473 insertions(+)
>  create mode 100644 Documentation/driver-api/media/drivers/visconti-viif.rst
> 
> diff --git a/Documentation/driver-api/media/drivers/index.rst b/Documentation/driver-api/media/drivers/index.rst
> index c4123a16b5f9..5592bd99ae5c 100644
> --- a/Documentation/driver-api/media/drivers/index.rst
> +++ b/Documentation/driver-api/media/drivers/index.rst
> @@ -24,6 +24,7 @@ Video4Linux (V4L) drivers
>  	sh_mobile_ceu_camera
>  	tuners
>  	vimc-devel
> +	visconti-viif
>  	zoran
>  	ccs/ccs
>  
> diff --git a/Documentation/driver-api/media/drivers/visconti-viif.rst b/Documentation/driver-api/media/drivers/visconti-viif.rst
> new file mode 100644
> index 000000000000..fd2480cbde46
> --- /dev/null
> +++ b/Documentation/driver-api/media/drivers/visconti-viif.rst
> @@ -0,0 +1,462 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +============================================
> +Visconti Video Input Interface (VIIF) Driver
> +============================================
> +
> +Overview
> +========
> +
> +The Visconti VIIF Hardware
> +--------------------------
> +
> +The Visconti Video Input Interface (VIIF) hardware is  a proprietary videocapture device of Toshiba.
> +Following function modules are integrated:
> +
> +* MIPI CSI2 receiver (CSI2RX)
> +* L1 Image Signal Processor (L1ISP)
> +
> +  * Correction, enhancement, adjustment on RAW pictures.
> +
> +* L2 Image Signal Processor (L2ISP)
> +
> +  * Lens distortion correction
> +  * Scaling
> +  * Cropping
> +
> +* Video DMAC
> +
> +  * format picture (RGB, YUV, Grayscale, ...)
> +  * write picture into DRAM
> +
> +Visconti5 SoC has two VIIF hardware instances.
> +
> +software architecture
> +---------------------
> +
> +The Visconti VIIF driver is composed of following components:
> +
> +* (image sensor driver)
> +* MIPI CSI2 receiver subdevice driver
> +
> +  * corresponding to CSI2RX
> +
> +* Visconti ISP subdevice driver
> +
> +  * corresponding to L1ISP, L2ISP (Lens distortion correction, Scaling)
> +
> +* Visconti Capture V4L2 device driver
> +
> +  * corresponding to L2ISP (Cropping) and Video DMAC
> +  * multiple output videobuf queues
> +
> +    * main path0 (RGB, YUV, Grayscale, ...)
> +    * main path1 (RGB, YUV, Grayscale, ...)
> +    * sub path (RAW picture)
> +
> +::
> +
> +  +-----------+      +-----------+     +----------------+       +-------------------------+
> +  | Sensor    |      | CSI2RX    |     | ISP            |       | Capture MAIN PATH0      |
> +  | subdevice | ---- | subdevice | --- | subdevice      | --+-- | V4L2 device             |
> +  | (IMX219)  |      | (CSI2RX)  |     | (L1ISP, L2ISP) |   |   | (L2ISP crop, VideoDMAC) |
> +  +-----------+      +-----------+     +----------------+   |   +-------------------------+
> +                                                            |
> +                                                            |   +-------------------------+
> +                                                            |   | Capture MAIN PATH1      |
> +                                                            +-- | V4L2 device             |
> +                                                            |   | (L2ISP crop, VideoDMAC) |
> +                                                            |   +-------------------------+
> +                                                            |
> +                                                            |   +-------------------------+
> +                                                            |   | Capture SUB PATH        |
> +                                                            +-- | V4L2 device             |
> +                                                                | (VideoDMAC)             |
> +                                                                +-------------------------+
> +
> +
> +The VIIF driver provides following device nodes for Visconti5 SoC:
> +
> +* VIIF0
> +
> +  * /dev/media0
> +  * /dev/video0 (main path0)
> +  * /dev/video1 (main path1)
> +  * /dev/video2 (sub path)
> +
> +* VIIF1
> +
> +  * /dev/media1
> +  * /dev/video3 (main path0)
> +  * /dev/video4 (main path1)
> +  * /dev/video5 (sub path)
> +
> +Use of coherent memory
> +----------------------
> +
> +Visconti5 SoC has two independent DDR SDRAM controllers.
> +Each controller is mapped to 36bit address space.
> +
> +Accelerator bus masters have two paths to access memory;
> +one is directly connected to SDRAM controller,
> +the another is connected via a cache coherency bus
> +which keeps coherency among CPUs.
> +
> +From acclerators and CPUs, the address map is following:
> +
> +* 0x0_8000_0000 DDR0 direct access
> +* 0x4_8000_0000 DDR0 coherency bus
> +* 0x8_8000_0000 DDR1 direct access
> +* 0xC_8000_0000 DDR1 coherency bus
> +
> +The base address can be specified with "memory" and "reserved-memory" elements
> +in a device tree description.
> +It's not recommended to mix direct address and coherent address.
> +
> +The Visconti5 VIIF driver always use only direct address to configure Video DMACs of the hardware.
> +This design is to avoid great performance loss at coherency bus caused by massive memory access.
> +You should not put the dma_coherent attribute to viif element in device tree.
> +Cache operations are done automatically by videobuf2 driver.
> +
> +Tested environment
> +------------------
> +
> +The Visconti VIIF driver was tested with following items:
> +
> +* IMX219 image sensor
> +* IMX335 image sensor
> +
> +IOCTLs
> +======
> +
> +Following public IOCTLs are supported
> +
> +* VIDIOC_QUERYCAP
> +* VIDIOC_ENUM_FMT
> +* VIDIOC_TRY_FMT
> +* VIDIOC_S_FMT
> +* VIDIOC_G_FMT
> +* VIDIOC_ENUM_FRAMESIZES
> +* VIDIOC_G_EXT_CTRLS
> +* VIDIOC_S_EXT_CTRLS
> +* VIDIOC_REQBUFS
> +* VIDIOC_QUERYBUF
> +* VIDIOC_QBUF
> +* VIDIOC_EXPBUF
> +* VIDIOC_DQBUF
> +* VIDIOC_CREATE_BUFS
> +* VIDIOC_PREPARE_BUF
> +* VIDIOC_STREAMON
> +* VIDIOC_STREAMOFF
> +
> +Vendor specific v4l2 controls
> +(except for V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE and
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE) should be called
> +after ioctl(S_FMT) because setting the frame format may affect
> +valid range of parameters of the controls.
> +
> +Vendor specific v4l2 controls
> +=============================
> +
> +.. _V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE:
> +
> +V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE
> +--------------------------------------------
> +
> +This control sets the format to pack multiple RAW pixel values into a word.
> +
> +This control accepts a __u32 value defined as `enum viif_rawpack_mode`.
> +
> +This control should be set before ioctl(S_FMT) and should not be changed after that.

Why do you need this? Doesn't the V4L2 pixelformat already explicitly
define the format, including packing?

> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE
> +--------------------------------------------
> +
> +This control sets L1ISP preprocessing mode for RAW input images.
> +
> +This control accepts a `struct viif_l1_input_mode_config` instance.
> +
> +This control should be set before ioctl(S_FMT) and should not be changed after that.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RGB_TO_Y_COEF:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RGB_TO_Y_COEF
> +-----------------------------------------------
> +
> +This control sets parameters to yield Y value from RGB pixel values.
> +
> +This control accepts a `struct viif_l1_rgb_to_y_coef_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE
> +-----------------------------------------
> +
> +This control sets rules of generating analog gains for each feature in L1ISP.
> +Related features are:
> +
> +* Optical Black Clamp Correction (OBCC)
> +* Defect Pixel Correction (DPC)
> +* RAW Color Noise Reduction (RCNR)
> +* Lens Shading Correction (LSC)
> +* Color matrix correction (MPRO)
> +* Image quality adjustment (VPRO)
> +
> +The base gain is set with V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG control.
> +
> +This control accepts a `struct viif_l1_ag_mode_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG
> +------------------------------------
> +
> +This control sets base analog gain commonly used in L1ISP features.
> +Analog gain for each L1ISP feature is generated
> +from the base analog gain and a configuration via V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE control.
> +
> +This control accepts a `struct viif_l1_ag_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRE:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRE
> +--------------------------------------
> +
> +This controls sets parameters for HDR Expansion feature.
> +
> +This control accepts a `struct viif_l1_hdre_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_EXTRACTION:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_EXTRACTION
> +------------------------------------------------
> +
> +This control sets black level parameters for L1ISP inputs.
> +
> +This control accepts a `struct viif_l1_img_extraction_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_DPC:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_DPC
> +-------------------------------------
> +
> +This control sets parameters for Defect Pixel Correction.
> +
> +This control accepts a `struct viif_l1_dpc_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_PRESET_WHITE_BALANCE:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_PRESET_WHITE_BALANCE
> +------------------------------------------------------
> +
> +This control sets parameters for white balance.
> +
> +This control accepts a `struct viif_l1_preset_white_balance_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RAW_COLOR_NOISE_REDUCTION:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RAW_COLOR_NOISE_REDUCTION
> +-----------------------------------------------------------
> +
> +This control sets parameters for RAW color noise reduction (RCNR) feature.
> +
> +This control accepts a `struct viif_l1_raw_color_noise_reduction_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRS:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRS
> +--------------------------------------
> +
> +This control sets parameters for HDR synthesis.
> +
> +This control accepts a `struct viif_l1_hdrs_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_BLACK_LEVEL_CORRECTION:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_BLACK_LEVEL_CORRECTION
> +--------------------------------------------------------
> +
> +This control sets parameters for black level correction feature.
> +
> +This control accepts a `struct viif_l1_black_level_correction_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_LSC:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_LSC
> +-------------------------------------
> +
> +This control sets parameters for Lens Shading Correction feature.
> +L1ISP supports 2 correction methods:
> +
> +* parabola shading
> +* grid shading
> +
> +This control accepts a `struct viif_l1_lsc_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_MAIN_PROCESS:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_MAIN_PROCESS
> +----------------------------------------------
> +
> +This controls sets parameter for the MAIN PROCESS feature which is composed of:
> +
> +* demosaic
> +* color matrix correction
> +
> +This control accepts a `struct viif_l1_main_process_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AWB:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AWB
> +-------------------------------------
> +
> +This control sets parameter for auto white balance feature.
> +
> +This control accepts a `struct viif_l1_awb_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_LOCK_AWB_GAIN:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_LOCK_AWB_GAIN
> +-------------------------------------------
> +
> +This control requests enable/disable of lock for AWB gain.
> +
> +This control accepts a u32 value; 0 for disable lock, 1 for enable lock.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC
> +--------------------------------------
> +
> +This control sets parameter for HDR Compression feature.
> +
> +This control accepts a `struct viif_l1_hdrc_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC_LTM:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC_LTM
> +------------------------------------------
> +
> +This control sets parameter for HDR Compression Local Tone Mapping feature.
> +
> +This control accepts a `struct viif_l1_hdrc_ltm_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_GAMMA:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_GAMMA
> +---------------------------------------
> +
> +This control sets parameter for gamma correction at L1ISP.
> +
> +This control accepts a `struct viif_l1_gamma_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_QUALITY_ADJUSTMENT:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_QUALITY_ADJUSTMENT
> +--------------------------------------------------------
> +
> +This control sets parameter for VPRO feature which is composed of:
> +
> +* luminance adjustment:
> +
> + * brightness adjustment
> + * linear contrast adjusment
> + * nonlinear contrast adjustment
> + * luminance noise reduction
> + * edge enhancement
> +
> +* chroma adjustment:
> +
> + * chroma suppression
> + * color level adjustment
> + * chroma noise reduction
> + * coring suppression
> + * edge chroma suppression
> + * color noise reduction
> +
> +This control accepts a `struct viif_l1_img_quality_adjustment_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AVG_LUM_GENERATION:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AVG_LUM_GENERATION
> +----------------------------------------------------
> +
> +This control sets parameter for average luminance statistics feature.
> +
> +This control accepts a `struct viif_l1_avg_lum_generation_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_UNDIST:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_UNDIST
> +----------------------------------------
> +
> +This control sets parameter for the lens undistortion feature of L2ISP.
> +Lens undistortion parameters are defined as either or combination of polinomial parameter and grid table.
> +
> +This control accepts a `struct viif_l2_undist_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_ROI:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_ROI
> +-------------------------------------
> +
> +This control sets dimensions of intermediate images and scaling parameter of L2ISP.
> +If you want to crop the output image,
> +you should set crop parameter to the corresponding source pad of the ISP subdevice with media-ctl tool.
> +
> +This control accepts a `struct viif_l2_roi_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_GAMMA:
> +
> +V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_GAMMA
> +---------------------------------------
> +
> +This control sets gamma parameter for L2ISP.
> +
> +This control accepts a `struct viif_l2_gamma_config` instance.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_CALIBRATION_STATUS:
> +
> +V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_CALIBRATION_STATUS
> +----------------------------------------------------
> +
> +This control provides CSI2 receiver calibration status.
> +
> +This control fills a `struct viif_csi2rx_cal_status` instance with current status.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_ERR_STATUS:
> +
> +V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_ERR_STATUS
> +--------------------------------------------
> +
> +This control provides CSI2 receiver error description.
> +
> +This control fills a `struct viif_csi2rx_err_status` instance with accumerated error status.
> +Note that internal accumerated status is cleared after reading.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_GET_LAST_CAPTURE_STATUS:
> +
> +V4L2_CID_VISCONTI_VIIF_GET_LAST_CAPTURE_STATUS
> +----------------------------------------------
> +
> +This control provides status information for the last captured frame.
> +
> +This control fills a `struct viif_l1_info` instance with current status.
> +
> +.. _V4L2_CID_VISCONTI_VIIF_GET_REPORTED_ERRORS:
> +
> +V4L2_CID_VISCONTI_VIIF_GET_REPORTED_ERRORS
> +------------------------------------------
> +
> +This control provides error information since the last read of this control.
> +
> +This control fills a `struct viif_reported_errors` instance with accumerated error status.
> +Note that internal accumerated status is cleared after reading.
> +
> +Structures
> +==========
> +
> +.. kernel-doc:: include/uapi/linux/visconti_viif.h

Instead of using controls, all ISP drivers merged within five or so years
use a parameter buffer. This could be said as being the best known approach
to pass the parameters to the ISP. Could you do the same here?

> +
> diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> index f9f73530a6be..2f0e4f955167 100644
> --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> @@ -295,6 +295,10 @@ still cause this situation.
>        - ``p_av1_film_grain``
>        - A pointer to a struct :c:type:`v4l2_ctrl_av1_film_grain`. Valid if this control is
>          of type ``V4L2_CTRL_TYPE_AV1_FILM_GRAIN``.
> +    * - void *
> +      - ``ptr``
> +      - A pointer to Visconti ISP control specific structure. Valid if this control is
> +        of type ``V4L2_CTRL_TYPE_VISCONTI_ISP``
>      * - void *
>        - ``ptr``
>        - A pointer to a compound type which can be an N-dimensional array
> diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> index 4d38acafe8e1..cd57fac8bbf9 100644
> --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> @@ -549,6 +549,11 @@ See also the examples in :ref:`control`.
>        - n/a
>        - A struct :c:type:`v4l2_ctrl_av1_film_grain`, containing AV1 Film Grain
>          parameters for stateless video decoders.
> +    * - ``V4L2_CTRL_TYPE_VISCONTI_ISP``
> +      - n/a
> +      - n/a
> +      - n/a
> +      - Structs specific for Visconti ISP configuration controls.
>  
>  .. raw:: latex
>  
> diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> index 3e58aac4ef0b..dbab7527445e 100644
> --- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> +++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> @@ -165,6 +165,7 @@ replace symbol V4L2_CTRL_TYPE_AV1_SEQUENCE :c:type:`v4l2_ctrl_type`
>  replace symbol V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY :c:type:`v4l2_ctrl_type`
>  replace symbol V4L2_CTRL_TYPE_AV1_FRAME :c:type:`v4l2_ctrl_type`
>  replace symbol V4L2_CTRL_TYPE_AV1_FILM_GRAIN :c:type:`v4l2_ctrl_type`
> +replace symbol V4L2_CTRL_TYPE_VISCONTI_ISP :c:type:`v4l2_ctrl_type`
>  
>  # V4L2 capability defines
>  replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities
Yuji Ishikawa Nov. 27, 2023, 12:39 a.m. UTC | #3 
Hello Hans,

Thank you for the review.

> -----Original Message-----
> From: Hans Verkuil <hverkuil@xs4all.nl>
> Sent: Tuesday, November 14, 2023 5:50 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@toshiba.co.jp>; Laurent Pinchart
> <laurent.pinchart@ideasonboard.com>; Mauro Carvalho Chehab
> <mchehab@kernel.org>; Rob Herring <robh+dt@kernel.org>; Krzysztof
> Kozlowski <krzysztof.kozlowski+dt@linaro.org>; Conor Dooley
> <conor+dt@kernel.org>; iwamatsu nobuhiro(岩松 信洋 ○ＤＩＴＣ□ＤＩＴ○
> ＯＳＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>
> Cc: linux-media@vger.kernel.org; devicetree@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v9 4/5] documentation: media: add documentation for
> Toshiba Visconti Video Input Interface driver
> 
> On 12/10/2023 09:13, Yuji Ishikawa wrote:
> > Added basic description of Video Input Interface driver of Toshiba
> > Visconti architecture.
> > It includes hardware organization, structure of the driver and
> > description of vendor specific V4L2 controls to configure the embedded
> > image signal processor.
> >
> > Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
> > ---
> > Changelog v3:
> > - Newly add documentation to describe SW and HW
> >
> > Changelog v4:
> > - no change
> >
> > Changelog v5:
> > - no change
> >
> > Changelog v6:
> > - add description of CSI2RX subdevice
> > - add ordering of ioctl(S_FMT) and ioctl(S_EXT_CTRLS)
> >
> > Changelog v7:
> > - no change
> >
> > Changelog v8:
> > - add usage of V4L2_CTRL_TYPE_VISCONTI_ISP
> >
> > Changelog v9:
> > - fix warning: set reference target for keyword
> > V4L2_CTRL_TYPE_VISCONTI_ISP
> >
> >  .../driver-api/media/drivers/index.rst        |   1 +
> >  .../media/drivers/visconti-viif.rst           | 462
> ++++++++++++++++++
> >  .../media/v4l/vidioc-g-ext-ctrls.rst          |   4 +
> >  .../media/v4l/vidioc-queryctrl.rst            |   5 +
> >  .../media/videodev2.h.rst.exceptions          |   1 +
> >  5 files changed, 473 insertions(+)
> >  create mode 100644
> > Documentation/driver-api/media/drivers/visconti-viif.rst
> >
> > diff --git a/Documentation/driver-api/media/drivers/index.rst
> > b/Documentation/driver-api/media/drivers/index.rst
> > index c4123a16b5f9..5592bd99ae5c 100644
> > --- a/Documentation/driver-api/media/drivers/index.rst
> > +++ b/Documentation/driver-api/media/drivers/index.rst
> > @@ -24,6 +24,7 @@ Video4Linux (V4L) drivers
> >  	sh_mobile_ceu_camera
> >  	tuners
> >  	vimc-devel
> > +	visconti-viif
> >  	zoran
> >  	ccs/ccs
> >
> > diff --git a/Documentation/driver-api/media/drivers/visconti-viif.rst
> > b/Documentation/driver-api/media/drivers/visconti-viif.rst
> > new file mode 100644
> > index 000000000000..fd2480cbde46
> > --- /dev/null
> > +++ b/Documentation/driver-api/media/drivers/visconti-viif.rst
> > @@ -0,0 +1,462 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +============================================
> > +Visconti Video Input Interface (VIIF) Driver
> > +============================================
> > +
> > +Overview
> > +========
> > +
> > +The Visconti VIIF Hardware
> > +--------------------------
> > +
> > +The Visconti Video Input Interface (VIIF) hardware is  a proprietary
> videocapture device of Toshiba.
> > +Following function modules are integrated:
> > +
> > +* MIPI CSI2 receiver (CSI2RX)
> > +* L1 Image Signal Processor (L1ISP)
> > +
> > +  * Correction, enhancement, adjustment on RAW pictures.
> > +
> > +* L2 Image Signal Processor (L2ISP)
> > +
> > +  * Lens distortion correction
> > +  * Scaling
> > +  * Cropping
> > +
> > +* Video DMAC
> > +
> > +  * format picture (RGB, YUV, Grayscale, ...)
> > +  * write picture into DRAM
> > +
> > +Visconti5 SoC has two VIIF hardware instances.
> > +
> > +software architecture
> > +---------------------
> > +
> > +The Visconti VIIF driver is composed of following components:
> > +
> > +* (image sensor driver)
> > +* MIPI CSI2 receiver subdevice driver
> > +
> > +  * corresponding to CSI2RX
> > +
> > +* Visconti ISP subdevice driver
> > +
> > +  * corresponding to L1ISP, L2ISP (Lens distortion correction,
> > + Scaling)
> > +
> > +* Visconti Capture V4L2 device driver
> > +
> > +  * corresponding to L2ISP (Cropping) and Video DMAC
> > +  * multiple output videobuf queues
> > +
> > +    * main path0 (RGB, YUV, Grayscale, ...)
> > +    * main path1 (RGB, YUV, Grayscale, ...)
> > +    * sub path (RAW picture)
> > +
> > +::
> > +
> > +  +-----------+      +-----------+     +----------------+
> +-------------------------+
> > +  | Sensor    |      | CSI2RX    |     | ISP            |       |
> Capture MAIN PATH0      |
> > +  | subdevice | ---- | subdevice | --- | subdevice      | --+-- | V4L2 device
> |
> > +  | (IMX219)  |      | (CSI2RX)  |     | (L1ISP, L2ISP) |   |   | (L2ISP
> crop, VideoDMAC) |
> > +  +-----------+      +-----------+     +----------------+   |
> +-------------------------+
> > +                                                            |
> > +                                                            |
> +-------------------------+
> > +                                                            |   |
> Capture MAIN PATH1      |
> > +                                                            +-- |
> V4L2 device             |
> > +                                                            |   |
> (L2ISP crop, VideoDMAC) |
> > +                                                            |
> +-------------------------+
> > +                                                            |
> > +                                                            |
> +-------------------------+
> > +                                                            |   |
> Capture SUB PATH        |
> > +                                                            +-- |
> V4L2 device             |
> > +                                                                |
> (VideoDMAC)             |
> > +
> > + +-------------------------+
> > +
> > +
> > +The VIIF driver provides following device nodes for Visconti5 SoC:
> > +
> > +* VIIF0
> > +
> > +  * /dev/media0
> > +  * /dev/video0 (main path0)
> > +  * /dev/video1 (main path1)
> > +  * /dev/video2 (sub path)
> > +
> > +* VIIF1
> > +
> > +  * /dev/media1
> > +  * /dev/video3 (main path0)
> > +  * /dev/video4 (main path1)
> > +  * /dev/video5 (sub path)
> > +
> > +Use of coherent memory
> > +----------------------
> > +
> > +Visconti5 SoC has two independent DDR SDRAM controllers.
> > +Each controller is mapped to 36bit address space.
> > +
> > +Accelerator bus masters have two paths to access memory; one is
> > +directly connected to SDRAM controller, the another is connected via
> > +a cache coherency bus which keeps coherency among CPUs.
> > +
> > +From acclerators and CPUs, the address map is following:
> 
> acclerators -> accelerators
> 
> > +
> > +* 0x0_8000_0000 DDR0 direct access
> > +* 0x4_8000_0000 DDR0 coherency bus
> > +* 0x8_8000_0000 DDR1 direct access
> > +* 0xC_8000_0000 DDR1 coherency bus
> > +
> > +The base address can be specified with "memory" and "reserved-memory"
> > +elements in a device tree description.
> > +It's not recommended to mix direct address and coherent address.
> > +
> > +The Visconti5 VIIF driver always use only direct address to configure Video
> DMACs of the hardware.
> > +This design is to avoid great performance loss at coherency bus caused by
> massive memory access.
> > +You should not put the dma_coherent attribute to viif element in device
> tree.
> > +Cache operations are done automatically by videobuf2 driver.
> > +
> > +Tested environment
> > +------------------
> > +
> > +The Visconti VIIF driver was tested with following items:
> > +
> > +* IMX219 image sensor
> > +* IMX335 image sensor
> > +
> > +IOCTLs
> > +======
> > +
> > +Following public IOCTLs are supported
> > +
> > +* VIDIOC_QUERYCAP
> > +* VIDIOC_ENUM_FMT
> > +* VIDIOC_TRY_FMT
> > +* VIDIOC_S_FMT
> > +* VIDIOC_G_FMT
> > +* VIDIOC_ENUM_FRAMESIZES
> > +* VIDIOC_G_EXT_CTRLS
> > +* VIDIOC_S_EXT_CTRLS
> > +* VIDIOC_REQBUFS
> > +* VIDIOC_QUERYBUF
> > +* VIDIOC_QBUF
> > +* VIDIOC_EXPBUF
> > +* VIDIOC_DQBUF
> > +* VIDIOC_CREATE_BUFS
> > +* VIDIOC_PREPARE_BUF
> > +* VIDIOC_STREAMON
> > +* VIDIOC_STREAMOFF
> 
> I would not mention these, this is all standard stuff.
> 
> The list is also incomplete :-)
> 

I'll remove standard ones.

> > +
> > +Vendor specific v4l2 controls
> > +(except for V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE and
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE) should be called
> after
> > +ioctl(S_FMT) because setting the frame format may affect valid range
> > +of parameters of the controls.
> 
> What happens if I do this the other way around? I.e., set a control, then set the
> format. Will the control values/ranges be updated automatically?
> If not, what will happen if I try to stream?
> 
> Generally setting the format should modify all affected controls if they are no
> longer matching the format requirements.
> 

Currently, control values are not updated even if they are not compatible to newly set format value.
I now understand a general idea for handling control values.
I'll firstly check if parameter buffer works fine for passing ISP parameters.
If that is not successful, I'll add some rules to modify control values.

> > +
> > +Vendor specific v4l2 controls
> > +=============================
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE:
> > +
> > +V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE
> > +--------------------------------------------
> > +
> > +This control sets the format to pack multiple RAW pixel values into a word.
> > +
> > +This control accepts a __u32 value defined as `enum viif_rawpack_mode`.
> > +
> > +This control should be set before ioctl(S_FMT) and should not be changed
> after that.
> 
> Why not? What happens if I do?
> 
> Typically you should be able to make changes to the configuration until the
> moment you allocate buffers (VIDIOC_REQBUFS): that locks the configuration
> into place and attempts to make changes will return -EBUSY. Until all buffers
> are released, then you can make changes again.
> 

I understand the constraint among ioctl calls.
I'll firstly check if parameter buffer works fine for passing ISP parameters.
If that is not successful, I'll fix current implementation.

> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE
> > +--------------------------------------------
> > +
> > +This control sets L1ISP preprocessing mode for RAW input images.
> > +
> > +This control accepts a `struct viif_l1_input_mode_config` instance.
> > +
> > +This control should be set before ioctl(S_FMT) and should not be changed
> after that.
> 
> Same comment here.
> 
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RGB_TO_Y_COEF:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RGB_TO_Y_COEF
> > +-----------------------------------------------
> > +
> > +This control sets parameters to yield Y value from RGB pixel values.
> > +
> > +This control accepts a `struct viif_l1_rgb_to_y_coef_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE
> > +-----------------------------------------
> > +
> > +This control sets rules of generating analog gains for each feature in L1ISP.
> > +Related features are:
> > +
> > +* Optical Black Clamp Correction (OBCC)
> > +* Defect Pixel Correction (DPC)
> > +* RAW Color Noise Reduction (RCNR)
> > +* Lens Shading Correction (LSC)
> > +* Color matrix correction (MPRO)
> > +* Image quality adjustment (VPRO)
> > +
> > +The base gain is set with V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG
> control.
> > +
> > +This control accepts a `struct viif_l1_ag_mode_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG
> > +------------------------------------
> > +
> > +This control sets base analog gain commonly used in L1ISP features.
> > +Analog gain for each L1ISP feature is generated from the base analog
> > +gain and a configuration via
> V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE control.
> > +
> > +This control accepts a `struct viif_l1_ag_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRE:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRE
> > +--------------------------------------
> > +
> > +This controls sets parameters for HDR Expansion feature.
> > +
> > +This control accepts a `struct viif_l1_hdre_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_EXTRACTION:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_EXTRACTION
> > +------------------------------------------------
> > +
> > +This control sets black level parameters for L1ISP inputs.
> > +
> > +This control accepts a `struct viif_l1_img_extraction_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_DPC:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_DPC
> > +-------------------------------------
> > +
> > +This control sets parameters for Defect Pixel Correction.
> > +
> > +This control accepts a `struct viif_l1_dpc_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_PRESET_WHITE_BALANCE:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_PRESET_WHITE_BALANCE
> > +------------------------------------------------------
> > +
> > +This control sets parameters for white balance.
> > +
> > +This control accepts a `struct viif_l1_preset_white_balance_config`
> instance.
> > +
> > +..
> _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RAW_COLOR_NOISE_REDUCTION:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RAW_COLOR_NOISE_REDUCTION
> > +-----------------------------------------------------------
> > +
> > +This control sets parameters for RAW color noise reduction (RCNR) feature.
> > +
> > +This control accepts a `struct viif_l1_raw_color_noise_reduction_config`
> instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRS:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRS
> > +--------------------------------------
> > +
> > +This control sets parameters for HDR synthesis.
> > +
> > +This control accepts a `struct viif_l1_hdrs_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_BLACK_LEVEL_CORRECTION:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_BLACK_LEVEL_CORRECTION
> > +--------------------------------------------------------
> > +
> > +This control sets parameters for black level correction feature.
> > +
> > +This control accepts a `struct viif_l1_black_level_correction_config`
> instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_LSC:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_LSC
> > +-------------------------------------
> > +
> > +This control sets parameters for Lens Shading Correction feature.
> > +L1ISP supports 2 correction methods:
> > +
> > +* parabola shading
> > +* grid shading
> > +
> > +This control accepts a `struct viif_l1_lsc_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_MAIN_PROCESS:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_MAIN_PROCESS
> > +----------------------------------------------
> > +
> > +This controls sets parameter for the MAIN PROCESS feature which is
> composed of:
> > +
> > +* demosaic
> > +* color matrix correction
> > +
> > +This control accepts a `struct viif_l1_main_process_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AWB:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AWB
> > +-------------------------------------
> > +
> > +This control sets parameter for auto white balance feature.
> > +
> > +This control accepts a `struct viif_l1_awb_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_LOCK_AWB_GAIN:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_LOCK_AWB_GAIN
> > +-------------------------------------------
> > +
> > +This control requests enable/disable of lock for AWB gain.
> > +
> > +This control accepts a u32 value; 0 for disable lock, 1 for enable lock.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC
> > +--------------------------------------
> > +
> > +This control sets parameter for HDR Compression feature.
> > +
> > +This control accepts a `struct viif_l1_hdrc_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC_LTM:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC_LTM
> > +------------------------------------------
> > +
> > +This control sets parameter for HDR Compression Local Tone Mapping
> feature.
> > +
> > +This control accepts a `struct viif_l1_hdrc_ltm_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_GAMMA:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_GAMMA
> > +---------------------------------------
> > +
> > +This control sets parameter for gamma correction at L1ISP.
> > +
> > +This control accepts a `struct viif_l1_gamma_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_QUALITY_ADJUSTMENT:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_QUALITY_ADJUSTMENT
> > +--------------------------------------------------------
> > +
> > +This control sets parameter for VPRO feature which is composed of:
> > +
> > +* luminance adjustment:
> > +
> > + * brightness adjustment
> > + * linear contrast adjusment
> > + * nonlinear contrast adjustment
> > + * luminance noise reduction
> > + * edge enhancement
> > +
> > +* chroma adjustment:
> > +
> > + * chroma suppression
> > + * color level adjustment
> > + * chroma noise reduction
> > + * coring suppression
> > + * edge chroma suppression
> > + * color noise reduction
> > +
> > +This control accepts a `struct viif_l1_img_quality_adjustment_config`
> instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AVG_LUM_GENERATION:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AVG_LUM_GENERATION
> > +----------------------------------------------------
> > +
> > +This control sets parameter for average luminance statistics feature.
> > +
> > +This control accepts a `struct viif_l1_avg_lum_generation_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_UNDIST:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_UNDIST
> > +----------------------------------------
> > +
> > +This control sets parameter for the lens undistortion feature of L2ISP.
> > +Lens undistortion parameters are defined as either or combination of
> polinomial parameter and grid table.
> > +
> > +This control accepts a `struct viif_l2_undist_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_ROI:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_ROI
> > +-------------------------------------
> > +
> > +This control sets dimensions of intermediate images and scaling parameter
> of L2ISP.
> > +If you want to crop the output image, you should set crop parameter
> > +to the corresponding source pad of the ISP subdevice with media-ctl tool.
> > +
> > +This control accepts a `struct viif_l2_roi_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_GAMMA:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_GAMMA
> > +---------------------------------------
> > +
> > +This control sets gamma parameter for L2ISP.
> > +
> > +This control accepts a `struct viif_l2_gamma_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_CALIBRATION_STATUS:
> > +
> > +V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_CALIBRATION_STATUS
> > +----------------------------------------------------
> > +
> > +This control provides CSI2 receiver calibration status.
> > +
> > +This control fills a `struct viif_csi2rx_cal_status` instance with current
> status.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_ERR_STATUS:
> > +
> > +V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_ERR_STATUS
> > +--------------------------------------------
> > +
> > +This control provides CSI2 receiver error description.
> > +
> > +This control fills a `struct viif_csi2rx_err_status` instance with accumerated
> error status.
> > +Note that internal accumerated status is cleared after reading.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_GET_LAST_CAPTURE_STATUS:
> > +
> > +V4L2_CID_VISCONTI_VIIF_GET_LAST_CAPTURE_STATUS
> > +----------------------------------------------
> > +
> > +This control provides status information for the last captured frame.
> > +
> > +This control fills a `struct viif_l1_info` instance with current status.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_GET_REPORTED_ERRORS:
> > +
> > +V4L2_CID_VISCONTI_VIIF_GET_REPORTED_ERRORS
> > +------------------------------------------
> > +
> > +This control provides error information since the last read of this control.
> > +
> > +This control fills a `struct viif_reported_errors` instance with accumerated
> error status.
> > +Note that internal accumerated status is cleared after reading.
> > +
> > +Structures
> > +==========
> > +
> > +.. kernel-doc:: include/uapi/linux/visconti_viif.h
> > +
> > diff --git
> > a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> > b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> > index f9f73530a6be..2f0e4f955167 100644
> > --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> > +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> > @@ -295,6 +295,10 @@ still cause this situation.
> >        - ``p_av1_film_grain``
> >        - A pointer to a struct :c:type:`v4l2_ctrl_av1_film_grain`. Valid if this
> control is
> >          of type ``V4L2_CTRL_TYPE_AV1_FILM_GRAIN``.
> > +    * - void *
> > +      - ``ptr``
> > +      - A pointer to Visconti ISP control specific structure. Valid if this
> control is
> > +        of type ``V4L2_CTRL_TYPE_VISCONTI_ISP``
> >      * - void *
> >        - ``ptr``
> >        - A pointer to a compound type which can be an N-dimensional
> > array diff --git
> > a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> > b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> > index 4d38acafe8e1..cd57fac8bbf9 100644
> > --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> > +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> > @@ -549,6 +549,11 @@ See also the examples in :ref:`control`.
> >        - n/a
> >        - A struct :c:type:`v4l2_ctrl_av1_film_grain`, containing AV1 Film
> Grain
> >          parameters for stateless video decoders.
> > +    * - ``V4L2_CTRL_TYPE_VISCONTI_ISP``
> > +      - n/a
> > +      - n/a
> > +      - n/a
> > +      - Structs specific for Visconti ISP configuration controls.
> >
> >  .. raw:: latex
> >
> > diff --git
> > a/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> > b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> > index 3e58aac4ef0b..dbab7527445e 100644
> > --- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> > +++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> > @@ -165,6 +165,7 @@ replace symbol V4L2_CTRL_TYPE_AV1_SEQUENCE
> > :c:type:`v4l2_ctrl_type`  replace symbol
> > V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY :c:type:`v4l2_ctrl_type`
> replace
> > symbol V4L2_CTRL_TYPE_AV1_FRAME :c:type:`v4l2_ctrl_type`  replace
> > symbol V4L2_CTRL_TYPE_AV1_FILM_GRAIN :c:type:`v4l2_ctrl_type`
> > +replace symbol V4L2_CTRL_TYPE_VISCONTI_ISP :c:type:`v4l2_ctrl_type`
> >
> >  # V4L2 capability defines
> >  replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities
> 
> Regards,
> 
> 	Hans

Regards,
Yuji
Yuji Ishikawa Dec. 4, 2023, 4:32 a.m. UTC | #4 
Hello Sakari,
Thank you for your review.

> -----Original Message-----
> From: Sakari Ailus <sakari.ailus@iki.fi>
> Sent: Wednesday, November 22, 2023 8:40 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@toshiba.co.jp>
> Cc: Hans Verkuil <hverkuil@xs4all.nl>; Laurent Pinchart
> <laurent.pinchart@ideasonboard.com>; Mauro Carvalho Chehab
> <mchehab@kernel.org>; Rob Herring <robh+dt@kernel.org>; Krzysztof
> Kozlowski <krzysztof.kozlowski+dt@linaro.org>; Conor Dooley
> <conor+dt@kernel.org>; iwamatsu nobuhiro(岩松 信洋 ○ＤＩＴＣ□ＤＩＴ○
> ＯＳＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>; linux-media@vger.kernel.org;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v9 4/5] documentation: media: add documentation for
> Toshiba Visconti Video Input Interface driver
> 
> Hi Yuji,
> 
> Thank you for the update and my apologies for not reviewing this properly
> earlier. Please see my commens below.
> 
> On Thu, Oct 12, 2023 at 04:13:28PM +0900, Yuji Ishikawa wrote:
> > Added basic description of Video Input Interface driver of Toshiba
> > Visconti architecture.
> > It includes hardware organization, structure of the driver and
> > description of vendor specific V4L2 controls to configure the embedded
> > image signal processor.
> >
> > Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
> > ---
> > Changelog v3:
> > - Newly add documentation to describe SW and HW
> >
> > Changelog v4:
> > - no change
> >
> > Changelog v5:
> > - no change
> >
> > Changelog v6:
> > - add description of CSI2RX subdevice
> > - add ordering of ioctl(S_FMT) and ioctl(S_EXT_CTRLS)
> >
> > Changelog v7:
> > - no change
> >
> > Changelog v8:
> > - add usage of V4L2_CTRL_TYPE_VISCONTI_ISP
> >
> > Changelog v9:
> > - fix warning: set reference target for keyword
> > V4L2_CTRL_TYPE_VISCONTI_ISP
> >
> >  .../driver-api/media/drivers/index.rst        |   1 +
> >  .../media/drivers/visconti-viif.rst           | 462
> ++++++++++++++++++
> >  .../media/v4l/vidioc-g-ext-ctrls.rst          |   4 +
> >  .../media/v4l/vidioc-queryctrl.rst            |   5 +
> >  .../media/videodev2.h.rst.exceptions          |   1 +
> >  5 files changed, 473 insertions(+)
> >  create mode 100644
> > Documentation/driver-api/media/drivers/visconti-viif.rst
> >
> > diff --git a/Documentation/driver-api/media/drivers/index.rst
> > b/Documentation/driver-api/media/drivers/index.rst
> > index c4123a16b5f9..5592bd99ae5c 100644
> > --- a/Documentation/driver-api/media/drivers/index.rst
> > +++ b/Documentation/driver-api/media/drivers/index.rst
> > @@ -24,6 +24,7 @@ Video4Linux (V4L) drivers
> >  	sh_mobile_ceu_camera
> >  	tuners
> >  	vimc-devel
> > +	visconti-viif
> >  	zoran
> >  	ccs/ccs
> >
> > diff --git a/Documentation/driver-api/media/drivers/visconti-viif.rst
> > b/Documentation/driver-api/media/drivers/visconti-viif.rst
> > new file mode 100644
> > index 000000000000..fd2480cbde46
> > --- /dev/null
> > +++ b/Documentation/driver-api/media/drivers/visconti-viif.rst
> > @@ -0,0 +1,462 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +============================================
> > +Visconti Video Input Interface (VIIF) Driver
> > +============================================
> > +
> > +Overview
> > +========
> > +
> > +The Visconti VIIF Hardware
> > +--------------------------
> > +
> > +The Visconti Video Input Interface (VIIF) hardware is  a proprietary
> videocapture device of Toshiba.
> > +Following function modules are integrated:
> > +
> > +* MIPI CSI2 receiver (CSI2RX)
> > +* L1 Image Signal Processor (L1ISP)
> > +
> > +  * Correction, enhancement, adjustment on RAW pictures.
> > +
> > +* L2 Image Signal Processor (L2ISP)
> > +
> > +  * Lens distortion correction
> > +  * Scaling
> > +  * Cropping
> > +
> > +* Video DMAC
> > +
> > +  * format picture (RGB, YUV, Grayscale, ...)
> > +  * write picture into DRAM
> > +
> > +Visconti5 SoC has two VIIF hardware instances.
> > +
> > +software architecture
> > +---------------------
> > +
> > +The Visconti VIIF driver is composed of following components:
> > +
> > +* (image sensor driver)
> > +* MIPI CSI2 receiver subdevice driver
> > +
> > +  * corresponding to CSI2RX
> > +
> > +* Visconti ISP subdevice driver
> > +
> > +  * corresponding to L1ISP, L2ISP (Lens distortion correction,
> > + Scaling)
> > +
> > +* Visconti Capture V4L2 device driver
> > +
> > +  * corresponding to L2ISP (Cropping) and Video DMAC
> > +  * multiple output videobuf queues
> > +
> > +    * main path0 (RGB, YUV, Grayscale, ...)
> > +    * main path1 (RGB, YUV, Grayscale, ...)
> > +    * sub path (RAW picture)
> > +
> > +::
> > +
> > +  +-----------+      +-----------+     +----------------+
> +-------------------------+
> > +  | Sensor    |      | CSI2RX    |     | ISP            |       |
> Capture MAIN PATH0      |
> > +  | subdevice | ---- | subdevice | --- | subdevice      | --+-- | V4L2 device
> |
> > +  | (IMX219)  |      | (CSI2RX)  |     | (L1ISP, L2ISP) |   |   | (L2ISP
> crop, VideoDMAC) |
> > +  +-----------+      +-----------+     +----------------+   |
> +-------------------------+
> > +                                                            |
> > +                                                            |
> +-------------------------+
> > +                                                            |   |
> Capture MAIN PATH1      |
> > +                                                            +-- |
> V4L2 device             |
> > +                                                            |   |
> (L2ISP crop, VideoDMAC) |
> > +                                                            |
> +-------------------------+
> > +                                                            |
> > +                                                            |
> +-------------------------+
> > +                                                            |   |
> Capture SUB PATH        |
> > +                                                            +-- |
> V4L2 device             |
> > +                                                                |
> (VideoDMAC)             |
> > +
> > + +-------------------------+
> > +
> > +
> > +The VIIF driver provides following device nodes for Visconti5 SoC:
> > +
> > +* VIIF0
> > +
> > +  * /dev/media0
> > +  * /dev/video0 (main path0)
> > +  * /dev/video1 (main path1)
> > +  * /dev/video2 (sub path)
> > +
> > +* VIIF1
> > +
> > +  * /dev/media1
> > +  * /dev/video3 (main path0)
> > +  * /dev/video4 (main path1)
> > +  * /dev/video5 (sub path)
> > +
> > +Use of coherent memory
> > +----------------------
> > +
> > +Visconti5 SoC has two independent DDR SDRAM controllers.
> > +Each controller is mapped to 36bit address space.
> > +
> > +Accelerator bus masters have two paths to access memory; one is
> > +directly connected to SDRAM controller, the another is connected via
> > +a cache coherency bus which keeps coherency among CPUs.
> > +
> > +From acclerators and CPUs, the address map is following:
> > +
> > +* 0x0_8000_0000 DDR0 direct access
> > +* 0x4_8000_0000 DDR0 coherency bus
> > +* 0x8_8000_0000 DDR1 direct access
> > +* 0xC_8000_0000 DDR1 coherency bus
> > +
> > +The base address can be specified with "memory" and "reserved-memory"
> > +elements in a device tree description.
> > +It's not recommended to mix direct address and coherent address.
> > +
> > +The Visconti5 VIIF driver always use only direct address to configure Video
> DMACs of the hardware.
> > +This design is to avoid great performance loss at coherency bus caused by
> massive memory access.
> > +You should not put the dma_coherent attribute to viif element in device
> tree.
> > +Cache operations are done automatically by videobuf2 driver.
> > +
> > +Tested environment
> > +------------------
> > +
> > +The Visconti VIIF driver was tested with following items:
> > +
> > +* IMX219 image sensor
> > +* IMX335 image sensor
> > +
> > +IOCTLs
> > +======
> > +
> > +Following public IOCTLs are supported
> > +
> > +* VIDIOC_QUERYCAP
> > +* VIDIOC_ENUM_FMT
> > +* VIDIOC_TRY_FMT
> > +* VIDIOC_S_FMT
> > +* VIDIOC_G_FMT
> > +* VIDIOC_ENUM_FRAMESIZES
> > +* VIDIOC_G_EXT_CTRLS
> > +* VIDIOC_S_EXT_CTRLS
> > +* VIDIOC_REQBUFS
> > +* VIDIOC_QUERYBUF
> > +* VIDIOC_QBUF
> > +* VIDIOC_EXPBUF
> > +* VIDIOC_DQBUF
> > +* VIDIOC_CREATE_BUFS
> > +* VIDIOC_PREPARE_BUF
> > +* VIDIOC_STREAMON
> > +* VIDIOC_STREAMOFF
> > +
> > +Vendor specific v4l2 controls
> > +(except for V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE and
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE) should be called
> after
> > +ioctl(S_FMT) because setting the frame format may affect valid range
> > +of parameters of the controls.
> > +
> > +Vendor specific v4l2 controls
> > +=============================
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE:
> > +
> > +V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE
> > +--------------------------------------------
> > +
> > +This control sets the format to pack multiple RAW pixel values into a word.
> > +
> > +This control accepts a __u32 value defined as `enum viif_rawpack_mode`.
> > +
> > +This control should be set before ioctl(S_FMT) and should not be changed
> after that.
> 
> Why do you need this? Doesn't the V4L2 pixelformat already explicitly define
> the format, including packing?
> 

This control value affects the unpacker between CSI2 receiver and ISP.
The rawpack mode is an option to receive from Wide-Dynamic-Range image sensors,
whose output bit width is larger than standard format (RAW20, RAW24).
For example, some WDR image sensors split 20 bit value into upper/lower 10bit values,
then put them into consective pixels to make a double-width RAW10 format image.

This option is only related to the interpretation of CSI2 input data.
Therefore, I think V4L2 pixel format (for resulting image) is not related to it.
The media bus format seems more relevant, but there is no corresponding definition to this case.

> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE
> > +--------------------------------------------
> > +
> > +This control sets L1ISP preprocessing mode for RAW input images.
> > +
> > +This control accepts a `struct viif_l1_input_mode_config` instance.
> > +
> > +This control should be set before ioctl(S_FMT) and should not be changed
> after that.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RGB_TO_Y_COEF:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RGB_TO_Y_COEF
> > +-----------------------------------------------
> > +
> > +This control sets parameters to yield Y value from RGB pixel values.
> > +
> > +This control accepts a `struct viif_l1_rgb_to_y_coef_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE
> > +-----------------------------------------
> > +
> > +This control sets rules of generating analog gains for each feature in L1ISP.
> > +Related features are:
> > +
> > +* Optical Black Clamp Correction (OBCC)
> > +* Defect Pixel Correction (DPC)
> > +* RAW Color Noise Reduction (RCNR)
> > +* Lens Shading Correction (LSC)
> > +* Color matrix correction (MPRO)
> > +* Image quality adjustment (VPRO)
> > +
> > +The base gain is set with V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG
> control.
> > +
> > +This control accepts a `struct viif_l1_ag_mode_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG
> > +------------------------------------
> > +
> > +This control sets base analog gain commonly used in L1ISP features.
> > +Analog gain for each L1ISP feature is generated from the base analog
> > +gain and a configuration via
> V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE control.
> > +
> > +This control accepts a `struct viif_l1_ag_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRE:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRE
> > +--------------------------------------
> > +
> > +This controls sets parameters for HDR Expansion feature.
> > +
> > +This control accepts a `struct viif_l1_hdre_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_EXTRACTION:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_EXTRACTION
> > +------------------------------------------------
> > +
> > +This control sets black level parameters for L1ISP inputs.
> > +
> > +This control accepts a `struct viif_l1_img_extraction_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_DPC:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_DPC
> > +-------------------------------------
> > +
> > +This control sets parameters for Defect Pixel Correction.
> > +
> > +This control accepts a `struct viif_l1_dpc_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_PRESET_WHITE_BALANCE:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_PRESET_WHITE_BALANCE
> > +------------------------------------------------------
> > +
> > +This control sets parameters for white balance.
> > +
> > +This control accepts a `struct viif_l1_preset_white_balance_config`
> instance.
> > +
> > +..
> _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RAW_COLOR_NOISE_REDUCTION:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RAW_COLOR_NOISE_REDUCTION
> > +-----------------------------------------------------------
> > +
> > +This control sets parameters for RAW color noise reduction (RCNR) feature.
> > +
> > +This control accepts a `struct viif_l1_raw_color_noise_reduction_config`
> instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRS:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRS
> > +--------------------------------------
> > +
> > +This control sets parameters for HDR synthesis.
> > +
> > +This control accepts a `struct viif_l1_hdrs_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_BLACK_LEVEL_CORRECTION:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_BLACK_LEVEL_CORRECTION
> > +--------------------------------------------------------
> > +
> > +This control sets parameters for black level correction feature.
> > +
> > +This control accepts a `struct viif_l1_black_level_correction_config`
> instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_LSC:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_LSC
> > +-------------------------------------
> > +
> > +This control sets parameters for Lens Shading Correction feature.
> > +L1ISP supports 2 correction methods:
> > +
> > +* parabola shading
> > +* grid shading
> > +
> > +This control accepts a `struct viif_l1_lsc_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_MAIN_PROCESS:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_MAIN_PROCESS
> > +----------------------------------------------
> > +
> > +This controls sets parameter for the MAIN PROCESS feature which is
> composed of:
> > +
> > +* demosaic
> > +* color matrix correction
> > +
> > +This control accepts a `struct viif_l1_main_process_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AWB:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AWB
> > +-------------------------------------
> > +
> > +This control sets parameter for auto white balance feature.
> > +
> > +This control accepts a `struct viif_l1_awb_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_LOCK_AWB_GAIN:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_LOCK_AWB_GAIN
> > +-------------------------------------------
> > +
> > +This control requests enable/disable of lock for AWB gain.
> > +
> > +This control accepts a u32 value; 0 for disable lock, 1 for enable lock.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC
> > +--------------------------------------
> > +
> > +This control sets parameter for HDR Compression feature.
> > +
> > +This control accepts a `struct viif_l1_hdrc_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC_LTM:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC_LTM
> > +------------------------------------------
> > +
> > +This control sets parameter for HDR Compression Local Tone Mapping
> feature.
> > +
> > +This control accepts a `struct viif_l1_hdrc_ltm_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_GAMMA:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_GAMMA
> > +---------------------------------------
> > +
> > +This control sets parameter for gamma correction at L1ISP.
> > +
> > +This control accepts a `struct viif_l1_gamma_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_QUALITY_ADJUSTMENT:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_QUALITY_ADJUSTMENT
> > +--------------------------------------------------------
> > +
> > +This control sets parameter for VPRO feature which is composed of:
> > +
> > +* luminance adjustment:
> > +
> > + * brightness adjustment
> > + * linear contrast adjusment
> > + * nonlinear contrast adjustment
> > + * luminance noise reduction
> > + * edge enhancement
> > +
> > +* chroma adjustment:
> > +
> > + * chroma suppression
> > + * color level adjustment
> > + * chroma noise reduction
> > + * coring suppression
> > + * edge chroma suppression
> > + * color noise reduction
> > +
> > +This control accepts a `struct viif_l1_img_quality_adjustment_config`
> instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AVG_LUM_GENERATION:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AVG_LUM_GENERATION
> > +----------------------------------------------------
> > +
> > +This control sets parameter for average luminance statistics feature.
> > +
> > +This control accepts a `struct viif_l1_avg_lum_generation_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_UNDIST:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_UNDIST
> > +----------------------------------------
> > +
> > +This control sets parameter for the lens undistortion feature of L2ISP.
> > +Lens undistortion parameters are defined as either or combination of
> polinomial parameter and grid table.
> > +
> > +This control accepts a `struct viif_l2_undist_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_ROI:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_ROI
> > +-------------------------------------
> > +
> > +This control sets dimensions of intermediate images and scaling parameter
> of L2ISP.
> > +If you want to crop the output image, you should set crop parameter
> > +to the corresponding source pad of the ISP subdevice with media-ctl tool.
> > +
> > +This control accepts a `struct viif_l2_roi_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_GAMMA:
> > +
> > +V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_GAMMA
> > +---------------------------------------
> > +
> > +This control sets gamma parameter for L2ISP.
> > +
> > +This control accepts a `struct viif_l2_gamma_config` instance.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_CALIBRATION_STATUS:
> > +
> > +V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_CALIBRATION_STATUS
> > +----------------------------------------------------
> > +
> > +This control provides CSI2 receiver calibration status.
> > +
> > +This control fills a `struct viif_csi2rx_cal_status` instance with current
> status.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_ERR_STATUS:
> > +
> > +V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_ERR_STATUS
> > +--------------------------------------------
> > +
> > +This control provides CSI2 receiver error description.
> > +
> > +This control fills a `struct viif_csi2rx_err_status` instance with accumerated
> error status.
> > +Note that internal accumerated status is cleared after reading.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_GET_LAST_CAPTURE_STATUS:
> > +
> > +V4L2_CID_VISCONTI_VIIF_GET_LAST_CAPTURE_STATUS
> > +----------------------------------------------
> > +
> > +This control provides status information for the last captured frame.
> > +
> > +This control fills a `struct viif_l1_info` instance with current status.
> > +
> > +.. _V4L2_CID_VISCONTI_VIIF_GET_REPORTED_ERRORS:
> > +
> > +V4L2_CID_VISCONTI_VIIF_GET_REPORTED_ERRORS
> > +------------------------------------------
> > +
> > +This control provides error information since the last read of this control.
> > +
> > +This control fills a `struct viif_reported_errors` instance with accumerated
> error status.
> > +Note that internal accumerated status is cleared after reading.
> > +
> > +Structures
> > +==========
> > +
> > +.. kernel-doc:: include/uapi/linux/visconti_viif.h
> 
> Instead of using controls, all ISP drivers merged within five or so years use a
> parameter buffer. This could be said as being the best known approach to pass
> the parameters to the ISP. Could you do the same here?
> 

I'll try implement parameter buffer.

> > +
> > diff --git
> > a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> > b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> > index f9f73530a6be..2f0e4f955167 100644
> > --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> > +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
> > @@ -295,6 +295,10 @@ still cause this situation.
> >        - ``p_av1_film_grain``
> >        - A pointer to a struct :c:type:`v4l2_ctrl_av1_film_grain`. Valid if this
> control is
> >          of type ``V4L2_CTRL_TYPE_AV1_FILM_GRAIN``.
> > +    * - void *
> > +      - ``ptr``
> > +      - A pointer to Visconti ISP control specific structure. Valid if this
> control is
> > +        of type ``V4L2_CTRL_TYPE_VISCONTI_ISP``
> >      * - void *
> >        - ``ptr``
> >        - A pointer to a compound type which can be an N-dimensional
> > array diff --git
> > a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> > b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> > index 4d38acafe8e1..cd57fac8bbf9 100644
> > --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> > +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
> > @@ -549,6 +549,11 @@ See also the examples in :ref:`control`.
> >        - n/a
> >        - A struct :c:type:`v4l2_ctrl_av1_film_grain`, containing AV1 Film
> Grain
> >          parameters for stateless video decoders.
> > +    * - ``V4L2_CTRL_TYPE_VISCONTI_ISP``
> > +      - n/a
> > +      - n/a
> > +      - n/a
> > +      - Structs specific for Visconti ISP configuration controls.
> >
> >  .. raw:: latex
> >
> > diff --git
> > a/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> > b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> > index 3e58aac4ef0b..dbab7527445e 100644
> > --- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> > +++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
> > @@ -165,6 +165,7 @@ replace symbol V4L2_CTRL_TYPE_AV1_SEQUENCE
> > :c:type:`v4l2_ctrl_type`  replace symbol
> > V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY :c:type:`v4l2_ctrl_type`
> replace
> > symbol V4L2_CTRL_TYPE_AV1_FRAME :c:type:`v4l2_ctrl_type`  replace
> > symbol V4L2_CTRL_TYPE_AV1_FILM_GRAIN :c:type:`v4l2_ctrl_type`
> > +replace symbol V4L2_CTRL_TYPE_VISCONTI_ISP :c:type:`v4l2_ctrl_type`
> >
> >  # V4L2 capability defines
> >  replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities
> 
> --
> Kind regards,
> 
> Sakari Ailus

Regards,
Yuji
diff mbox series

Patch

diff --git a/Documentation/driver-api/media/drivers/index.rst b/Documentation/driver-api/media/drivers/index.rst
index c4123a16b5f9..5592bd99ae5c 100644
--- a/Documentation/driver-api/media/drivers/index.rst
+++ b/Documentation/driver-api/media/drivers/index.rst
@@ -24,6 +24,7 @@  Video4Linux (V4L) drivers
 	sh_mobile_ceu_camera
 	tuners
 	vimc-devel
+	visconti-viif
 	zoran
 	ccs/ccs
 
diff --git a/Documentation/driver-api/media/drivers/visconti-viif.rst b/Documentation/driver-api/media/drivers/visconti-viif.rst
new file mode 100644
index 000000000000..fd2480cbde46
--- /dev/null
+++ b/Documentation/driver-api/media/drivers/visconti-viif.rst
@@ -0,0 +1,462 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================
+Visconti Video Input Interface (VIIF) Driver
+============================================
+
+Overview
+========
+
+The Visconti VIIF Hardware
+--------------------------
+
+The Visconti Video Input Interface (VIIF) hardware is  a proprietary videocapture device of Toshiba.
+Following function modules are integrated:
+
+* MIPI CSI2 receiver (CSI2RX)
+* L1 Image Signal Processor (L1ISP)
+
+  * Correction, enhancement, adjustment on RAW pictures.
+
+* L2 Image Signal Processor (L2ISP)
+
+  * Lens distortion correction
+  * Scaling
+  * Cropping
+
+* Video DMAC
+
+  * format picture (RGB, YUV, Grayscale, ...)
+  * write picture into DRAM
+
+Visconti5 SoC has two VIIF hardware instances.
+
+software architecture
+---------------------
+
+The Visconti VIIF driver is composed of following components:
+
+* (image sensor driver)
+* MIPI CSI2 receiver subdevice driver
+
+  * corresponding to CSI2RX
+
+* Visconti ISP subdevice driver
+
+  * corresponding to L1ISP, L2ISP (Lens distortion correction, Scaling)
+
+* Visconti Capture V4L2 device driver
+
+  * corresponding to L2ISP (Cropping) and Video DMAC
+  * multiple output videobuf queues
+
+    * main path0 (RGB, YUV, Grayscale, ...)
+    * main path1 (RGB, YUV, Grayscale, ...)
+    * sub path (RAW picture)
+
+::
+
+  +-----------+      +-----------+     +----------------+       +-------------------------+
+  | Sensor    |      | CSI2RX    |     | ISP            |       | Capture MAIN PATH0      |
+  | subdevice | ---- | subdevice | --- | subdevice      | --+-- | V4L2 device             |
+  | (IMX219)  |      | (CSI2RX)  |     | (L1ISP, L2ISP) |   |   | (L2ISP crop, VideoDMAC) |
+  +-----------+      +-----------+     +----------------+   |   +-------------------------+
+                                                            |
+                                                            |   +-------------------------+
+                                                            |   | Capture MAIN PATH1      |
+                                                            +-- | V4L2 device             |
+                                                            |   | (L2ISP crop, VideoDMAC) |
+                                                            |   +-------------------------+
+                                                            |
+                                                            |   +-------------------------+
+                                                            |   | Capture SUB PATH        |
+                                                            +-- | V4L2 device             |
+                                                                | (VideoDMAC)             |
+                                                                +-------------------------+
+
+
+The VIIF driver provides following device nodes for Visconti5 SoC:
+
+* VIIF0
+
+  * /dev/media0
+  * /dev/video0 (main path0)
+  * /dev/video1 (main path1)
+  * /dev/video2 (sub path)
+
+* VIIF1
+
+  * /dev/media1
+  * /dev/video3 (main path0)
+  * /dev/video4 (main path1)
+  * /dev/video5 (sub path)
+
+Use of coherent memory
+----------------------
+
+Visconti5 SoC has two independent DDR SDRAM controllers.
+Each controller is mapped to 36bit address space.
+
+Accelerator bus masters have two paths to access memory;
+one is directly connected to SDRAM controller,
+the another is connected via a cache coherency bus
+which keeps coherency among CPUs.
+
+From acclerators and CPUs, the address map is following:
+
+* 0x0_8000_0000 DDR0 direct access
+* 0x4_8000_0000 DDR0 coherency bus
+* 0x8_8000_0000 DDR1 direct access
+* 0xC_8000_0000 DDR1 coherency bus
+
+The base address can be specified with "memory" and "reserved-memory" elements
+in a device tree description.
+It's not recommended to mix direct address and coherent address.
+
+The Visconti5 VIIF driver always use only direct address to configure Video DMACs of the hardware.
+This design is to avoid great performance loss at coherency bus caused by massive memory access.
+You should not put the dma_coherent attribute to viif element in device tree.
+Cache operations are done automatically by videobuf2 driver.
+
+Tested environment
+------------------
+
+The Visconti VIIF driver was tested with following items:
+
+* IMX219 image sensor
+* IMX335 image sensor
+
+IOCTLs
+======
+
+Following public IOCTLs are supported
+
+* VIDIOC_QUERYCAP
+* VIDIOC_ENUM_FMT
+* VIDIOC_TRY_FMT
+* VIDIOC_S_FMT
+* VIDIOC_G_FMT
+* VIDIOC_ENUM_FRAMESIZES
+* VIDIOC_G_EXT_CTRLS
+* VIDIOC_S_EXT_CTRLS
+* VIDIOC_REQBUFS
+* VIDIOC_QUERYBUF
+* VIDIOC_QBUF
+* VIDIOC_EXPBUF
+* VIDIOC_DQBUF
+* VIDIOC_CREATE_BUFS
+* VIDIOC_PREPARE_BUF
+* VIDIOC_STREAMON
+* VIDIOC_STREAMOFF
+
+Vendor specific v4l2 controls
+(except for V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE and
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE) should be called
+after ioctl(S_FMT) because setting the frame format may affect
+valid range of parameters of the controls.
+
+Vendor specific v4l2 controls
+=============================
+
+.. _V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE:
+
+V4L2_CID_VISCONTI_VIIF_MAIN_SET_RAWPACK_MODE
+--------------------------------------------
+
+This control sets the format to pack multiple RAW pixel values into a word.
+
+This control accepts a __u32 value defined as `enum viif_rawpack_mode`.
+
+This control should be set before ioctl(S_FMT) and should not be changed after that.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_INPUT_MODE
+--------------------------------------------
+
+This control sets L1ISP preprocessing mode for RAW input images.
+
+This control accepts a `struct viif_l1_input_mode_config` instance.
+
+This control should be set before ioctl(S_FMT) and should not be changed after that.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RGB_TO_Y_COEF:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RGB_TO_Y_COEF
+-----------------------------------------------
+
+This control sets parameters to yield Y value from RGB pixel values.
+
+This control accepts a `struct viif_l1_rgb_to_y_coef_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE
+-----------------------------------------
+
+This control sets rules of generating analog gains for each feature in L1ISP.
+Related features are:
+
+* Optical Black Clamp Correction (OBCC)
+* Defect Pixel Correction (DPC)
+* RAW Color Noise Reduction (RCNR)
+* Lens Shading Correction (LSC)
+* Color matrix correction (MPRO)
+* Image quality adjustment (VPRO)
+
+The base gain is set with V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG control.
+
+This control accepts a `struct viif_l1_ag_mode_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG
+------------------------------------
+
+This control sets base analog gain commonly used in L1ISP features.
+Analog gain for each L1ISP feature is generated
+from the base analog gain and a configuration via V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AG_MODE control.
+
+This control accepts a `struct viif_l1_ag_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRE:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRE
+--------------------------------------
+
+This controls sets parameters for HDR Expansion feature.
+
+This control accepts a `struct viif_l1_hdre_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_EXTRACTION:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_EXTRACTION
+------------------------------------------------
+
+This control sets black level parameters for L1ISP inputs.
+
+This control accepts a `struct viif_l1_img_extraction_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_DPC:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_DPC
+-------------------------------------
+
+This control sets parameters for Defect Pixel Correction.
+
+This control accepts a `struct viif_l1_dpc_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_PRESET_WHITE_BALANCE:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_PRESET_WHITE_BALANCE
+------------------------------------------------------
+
+This control sets parameters for white balance.
+
+This control accepts a `struct viif_l1_preset_white_balance_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RAW_COLOR_NOISE_REDUCTION:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_RAW_COLOR_NOISE_REDUCTION
+-----------------------------------------------------------
+
+This control sets parameters for RAW color noise reduction (RCNR) feature.
+
+This control accepts a `struct viif_l1_raw_color_noise_reduction_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRS:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRS
+--------------------------------------
+
+This control sets parameters for HDR synthesis.
+
+This control accepts a `struct viif_l1_hdrs_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_BLACK_LEVEL_CORRECTION:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_BLACK_LEVEL_CORRECTION
+--------------------------------------------------------
+
+This control sets parameters for black level correction feature.
+
+This control accepts a `struct viif_l1_black_level_correction_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_LSC:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_LSC
+-------------------------------------
+
+This control sets parameters for Lens Shading Correction feature.
+L1ISP supports 2 correction methods:
+
+* parabola shading
+* grid shading
+
+This control accepts a `struct viif_l1_lsc_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_MAIN_PROCESS:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_MAIN_PROCESS
+----------------------------------------------
+
+This controls sets parameter for the MAIN PROCESS feature which is composed of:
+
+* demosaic
+* color matrix correction
+
+This control accepts a `struct viif_l1_main_process_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AWB:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AWB
+-------------------------------------
+
+This control sets parameter for auto white balance feature.
+
+This control accepts a `struct viif_l1_awb_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_LOCK_AWB_GAIN:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_LOCK_AWB_GAIN
+-------------------------------------------
+
+This control requests enable/disable of lock for AWB gain.
+
+This control accepts a u32 value; 0 for disable lock, 1 for enable lock.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC
+--------------------------------------
+
+This control sets parameter for HDR Compression feature.
+
+This control accepts a `struct viif_l1_hdrc_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC_LTM:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_HDRC_LTM
+------------------------------------------
+
+This control sets parameter for HDR Compression Local Tone Mapping feature.
+
+This control accepts a `struct viif_l1_hdrc_ltm_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_GAMMA:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_GAMMA
+---------------------------------------
+
+This control sets parameter for gamma correction at L1ISP.
+
+This control accepts a `struct viif_l1_gamma_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_QUALITY_ADJUSTMENT:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_IMG_QUALITY_ADJUSTMENT
+--------------------------------------------------------
+
+This control sets parameter for VPRO feature which is composed of:
+
+* luminance adjustment:
+
+ * brightness adjustment
+ * linear contrast adjusment
+ * nonlinear contrast adjustment
+ * luminance noise reduction
+ * edge enhancement
+
+* chroma adjustment:
+
+ * chroma suppression
+ * color level adjustment
+ * chroma noise reduction
+ * coring suppression
+ * edge chroma suppression
+ * color noise reduction
+
+This control accepts a `struct viif_l1_img_quality_adjustment_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AVG_LUM_GENERATION:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L1_SET_AVG_LUM_GENERATION
+----------------------------------------------------
+
+This control sets parameter for average luminance statistics feature.
+
+This control accepts a `struct viif_l1_avg_lum_generation_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_UNDIST:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_UNDIST
+----------------------------------------
+
+This control sets parameter for the lens undistortion feature of L2ISP.
+Lens undistortion parameters are defined as either or combination of polinomial parameter and grid table.
+
+This control accepts a `struct viif_l2_undist_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_ROI:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_ROI
+-------------------------------------
+
+This control sets dimensions of intermediate images and scaling parameter of L2ISP.
+If you want to crop the output image,
+you should set crop parameter to the corresponding source pad of the ISP subdevice with media-ctl tool.
+
+This control accepts a `struct viif_l2_roi_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_GAMMA:
+
+V4L2_CID_VISCONTI_VIIF_ISP_L2_SET_GAMMA
+---------------------------------------
+
+This control sets gamma parameter for L2ISP.
+
+This control accepts a `struct viif_l2_gamma_config` instance.
+
+.. _V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_CALIBRATION_STATUS:
+
+V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_CALIBRATION_STATUS
+----------------------------------------------------
+
+This control provides CSI2 receiver calibration status.
+
+This control fills a `struct viif_csi2rx_cal_status` instance with current status.
+
+.. _V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_ERR_STATUS:
+
+V4L2_CID_VISCONTI_VIIF_CSI2RX_GET_ERR_STATUS
+--------------------------------------------
+
+This control provides CSI2 receiver error description.
+
+This control fills a `struct viif_csi2rx_err_status` instance with accumerated error status.
+Note that internal accumerated status is cleared after reading.
+
+.. _V4L2_CID_VISCONTI_VIIF_GET_LAST_CAPTURE_STATUS:
+
+V4L2_CID_VISCONTI_VIIF_GET_LAST_CAPTURE_STATUS
+----------------------------------------------
+
+This control provides status information for the last captured frame.
+
+This control fills a `struct viif_l1_info` instance with current status.
+
+.. _V4L2_CID_VISCONTI_VIIF_GET_REPORTED_ERRORS:
+
+V4L2_CID_VISCONTI_VIIF_GET_REPORTED_ERRORS
+------------------------------------------
+
+This control provides error information since the last read of this control.
+
+This control fills a `struct viif_reported_errors` instance with accumerated error status.
+Note that internal accumerated status is cleared after reading.
+
+Structures
+==========
+
+.. kernel-doc:: include/uapi/linux/visconti_viif.h
+
diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
index f9f73530a6be..2f0e4f955167 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
@@ -295,6 +295,10 @@  still cause this situation.
       - ``p_av1_film_grain``
       - A pointer to a struct :c:type:`v4l2_ctrl_av1_film_grain`. Valid if this control is
         of type ``V4L2_CTRL_TYPE_AV1_FILM_GRAIN``.
+    * - void *
+      - ``ptr``
+      - A pointer to Visconti ISP control specific structure. Valid if this control is
+        of type ``V4L2_CTRL_TYPE_VISCONTI_ISP``
     * - void *
       - ``ptr``
       - A pointer to a compound type which can be an N-dimensional array
diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
index 4d38acafe8e1..cd57fac8bbf9 100644
--- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
+++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
@@ -549,6 +549,11 @@  See also the examples in :ref:`control`.
       - n/a
       - A struct :c:type:`v4l2_ctrl_av1_film_grain`, containing AV1 Film Grain
         parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_VISCONTI_ISP``
+      - n/a
+      - n/a
+      - n/a
+      - Structs specific for Visconti ISP configuration controls.
 
 .. raw:: latex
 
diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
index 3e58aac4ef0b..dbab7527445e 100644
--- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions
+++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions
@@ -165,6 +165,7 @@  replace symbol V4L2_CTRL_TYPE_AV1_SEQUENCE :c:type:`v4l2_ctrl_type`
 replace symbol V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY :c:type:`v4l2_ctrl_type`
 replace symbol V4L2_CTRL_TYPE_AV1_FRAME :c:type:`v4l2_ctrl_type`
 replace symbol V4L2_CTRL_TYPE_AV1_FILM_GRAIN :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_VISCONTI_ISP :c:type:`v4l2_ctrl_type`
 
 # V4L2 capability defines
 replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities