| Message ID | 20231105165521.3592037-3-jonas@kwiboo.se |
|---|---|
| State | Superseded |
| Headers | show |
| Series | None | expand |
Hi, Le dimanche 05 novembre 2023 à 16:55 +0000, Jonas Karlman a écrit : > Add NV15 and NV20 pixel formats used by the Rockchip Video Decoder for > 10-bit buffers. > > NV15 and NV20 is 10-bit 4:2:0/4:2:2 semi-planar YUV formats similar to > NV12 and NV16, using 10-bit components with no padding between each > component. Instead, a group of 4 luminance/chrominance samples are > stored over 5 bytes in little endian order: > > YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes > > The '15' and '20' suffix refers to the optimum effective bits per pixel > which is achieved when the total number of luminance samples is a > multiple of 8 for NV15 and 4 for NV20. I had this mostly documented already in September: https://patchwork.linuxtv.org/project/linux-media/patch/20230914150651.3114134-3-nicolas.dufresne@collabora.com/ https://patchwork.linuxtv.org/project/linux-media/patch/20230914150651.3114134-4-nicolas.dufresne@collabora.com/ I think I was improving a bit the documentation avoiding to repeat what NV15 (little and big endian) is over and over. I've had no feedback on V2, so assumed it going to be picked, but then it will certainly conflict with this change. > > Signed-off-by: Jonas Karlman <jonas@kwiboo.se> > --- > v4: > - No change > > v3: > - Use bpp and bpp_div instead of the misuse of block_w/block_h > - Update documentation, expand to use full 4x4 sample image > > .../media/v4l/pixfmt-yuv-planar.rst | 128 ++++++++++++++++++ > drivers/media/v4l2-core/v4l2-common.c | 2 + > drivers/media/v4l2-core/v4l2-ioctl.c | 2 + > include/uapi/linux/videodev2.h | 2 + > 4 files changed, 134 insertions(+) > > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst > index 1840224faa41..4366cdcb970e 100644 > --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst > +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst > @@ -79,6 +79,13 @@ All components are stored with the same number of bits per component. > - Cr, Cb > - Yes > - Linear > + * - V4L2_PIX_FMT_NV15 > + - 'NV15' > + - 10 > + - 4:2:0 > + - Cb, Cr > + - Yes > + - Linear I'd like to see 8 and 10bit formats grouped and not mixed. > * - V4L2_PIX_FMT_NV12M > - 'NM12' > - 8 > @@ -158,6 +165,13 @@ All components are stored with the same number of bits per component. > - Cr, Cb > - Yes > - Linear > + * - V4L2_PIX_FMT_NV20 > + - 'NV20' > + - 10 > + - 4:2:2 > + - Cb, Cr > + - Yes > + - Linear > * - V4L2_PIX_FMT_NV16M > - 'NM16' > - 8 > @@ -288,6 +302,57 @@ of the luma plane. > - Cr\ :sub:`11` > > > +.. _V4L2-PIX-FMT-NV15: > + > +NV15 > +---- > + > +Semi-planar 10-bit YUV 4:2:0 format similar to NV12, using 10-bit components > +with no padding between each component. A group of 4 components are stored over > +5 bytes in little endian order. > + > +.. flat-table:: Sample 4x4 NV15 Image (1 byte per cell) > + :header-rows: 0 > + :stub-columns: 0 > + > + * - start + 0: > + - Y'\ :sub:`00[7:0]` > + - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]` > + - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]` > + - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]` > + - Y'\ :sub:`03[9:2]` > + * - start + 5: > + - Y'\ :sub:`10[7:0]` > + - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]` > + - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]` > + - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]` > + - Y'\ :sub:`13[9:2]` > + * - start + 10: > + - Y'\ :sub:`20[7:0]` > + - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]` > + - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]` > + - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]` > + - Y'\ :sub:`23[9:2]` > + * - start + 15: > + - Y'\ :sub:`30[7:0]` > + - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]` > + - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]` > + - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]` > + - Y'\ :sub:`33[9:2]` > + * - start + 20: > + - Cb\ :sub:`00[7:0]` > + - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]` > + - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]` > + - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]` > + - Cr\ :sub:`01[9:2]` > + * - start + 25: > + - Cb\ :sub:`10[7:0]` > + - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]` > + - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]` > + - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]` > + - Cr\ :sub:`11[9:2]` > + > + > .. _V4L2-PIX-FMT-NV12MT: > .. _V4L2-PIX-FMT-NV12MT-16X16: > .. _V4L2-PIX-FMT-NV12-4L4: > @@ -500,6 +565,69 @@ number of lines as the luma plane. > - Cr\ :sub:`32` > > > +.. _V4L2-PIX-FMT-NV20: > + > +NV20 > +---- > + > +Semi-planar 10-bit YUV 4:2:2 format similar to NV16, using 10-bit components > +with no padding between each component. A group of 4 components are stored over > +5 bytes in little endian order. > + > +.. flat-table:: Sample 4x4 NV20 Image (1 byte per cell) > + :header-rows: 0 > + :stub-columns: 0 > + > + * - start + 0: > + - Y'\ :sub:`00[7:0]` > + - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]` > + - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]` > + - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]` > + - Y'\ :sub:`03[9:2]` > + * - start + 5: > + - Y'\ :sub:`10[7:0]` > + - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]` > + - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]` > + - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]` > + - Y'\ :sub:`13[9:2]` > + * - start + 10: > + - Y'\ :sub:`20[7:0]` > + - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]` > + - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]` > + - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]` > + - Y'\ :sub:`23[9:2]` > + * - start + 15: > + - Y'\ :sub:`30[7:0]` > + - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]` > + - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]` > + - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]` > + - Y'\ :sub:`33[9:2]` > + * - start + 20: > + - Cb\ :sub:`00[7:0]` > + - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]` > + - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]` > + - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]` > + - Cr\ :sub:`01[9:2]` > + * - start + 25: > + - Cb\ :sub:`10[7:0]` > + - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]` > + - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]` > + - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]` > + - Cr\ :sub:`11[9:2]` > + * - start + 30: > + - Cb\ :sub:`20[7:0]` > + - Cr\ :sub:`20[5:0]`\ Cb\ :sub:`20[9:8]` > + - Cb\ :sub:`21[3:0]`\ Cr\ :sub:`20[9:6]` > + - Cr\ :sub:`21[1:0]`\ Cb\ :sub:`21[9:4]` > + - Cr\ :sub:`21[9:2]` > + * - start + 35: > + - Cb\ :sub:`30[7:0]` > + - Cr\ :sub:`30[5:0]`\ Cb\ :sub:`30[9:8]` > + - Cb\ :sub:`31[3:0]`\ Cr\ :sub:`30[9:6]` > + - Cr\ :sub:`31[1:0]`\ Cb\ :sub:`31[9:4]` > + - Cr\ :sub:`31[9:2]` > + > + > .. _V4L2-PIX-FMT-NV24: > .. _V4L2-PIX-FMT-NV42: > > diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c > index 834b426da8b1..c65ffab5800a 100644 > --- a/drivers/media/v4l2-core/v4l2-common.c > +++ b/drivers/media/v4l2-core/v4l2-common.c > @@ -270,8 +270,10 @@ const struct v4l2_format_info *v4l2_format_info(u32 format) > /* YUV planar formats */ > { .format = V4L2_PIX_FMT_NV12, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 }, > { .format = V4L2_PIX_FMT_NV21, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 }, > + { .format = V4L2_PIX_FMT_NV15, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 10, 0, 0 }, .bpp_div = { 4, 4, 1, 1 }, .hdiv = 2, .vdiv = 2 }, > { .format = V4L2_PIX_FMT_NV16, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 }, > { .format = V4L2_PIX_FMT_NV61, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 }, > + { .format = V4L2_PIX_FMT_NV20, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 10, 0, 0 }, .bpp_div = { 4, 4, 1, 1 }, .hdiv = 2, .vdiv = 1 }, > { .format = V4L2_PIX_FMT_NV24, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 1, .vdiv = 1 }, > { .format = V4L2_PIX_FMT_NV42, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 1, .vdiv = 1 }, > { .format = V4L2_PIX_FMT_P010, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 2, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 }, > diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c > index 9b1de54ce379..937434e5f2c1 100644 > --- a/drivers/media/v4l2-core/v4l2-ioctl.c > +++ b/drivers/media/v4l2-core/v4l2-ioctl.c > @@ -1347,8 +1347,10 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt) > case V4L2_PIX_FMT_YUV48_12: descr = "12-bit YUV 4:4:4 Packed"; break; > case V4L2_PIX_FMT_NV12: descr = "Y/UV 4:2:0"; break; > case V4L2_PIX_FMT_NV21: descr = "Y/VU 4:2:0"; break; > + case V4L2_PIX_FMT_NV15: descr = "10-bit Y/UV 4:2:0 (Packed)"; break; > case V4L2_PIX_FMT_NV16: descr = "Y/UV 4:2:2"; break; > case V4L2_PIX_FMT_NV61: descr = "Y/VU 4:2:2"; break; > + case V4L2_PIX_FMT_NV20: descr = "10-bit Y/UV 4:2:2 (Packed)"; break; > case V4L2_PIX_FMT_NV24: descr = "Y/UV 4:4:4"; break; > case V4L2_PIX_FMT_NV42: descr = "Y/VU 4:4:4"; break; > case V4L2_PIX_FMT_P010: descr = "10-bit Y/UV 4:2:0"; break; > diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h > index c3d4e490ce7c..617340c43e40 100644 > --- a/include/uapi/linux/videodev2.h > +++ b/include/uapi/linux/videodev2.h > @@ -638,8 +638,10 @@ struct v4l2_pix_format { > /* two planes -- one Y, one Cr + Cb interleaved */ > #define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ > #define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */ > +#define V4L2_PIX_FMT_NV15 v4l2_fourcc('N', 'V', '1', '5') /* 15 Y/CbCr 4:2:0 10-bit packed */ > #define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */ > #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ > +#define V4L2_PIX_FMT_NV20 v4l2_fourcc('N', 'V', '2', '0') /* 20 Y/CbCr 4:2:2 10-bit packed */ Would make sense to group all semi planar 10bit together. > #define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */ > #define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */ > #define V4L2_PIX_FMT_P010 v4l2_fourcc('P', '0', '1', '0') /* 24 Y/CbCr 4:2:0 10-bit per component */ regards, Nicolas
On 2023-11-08 03:52, Nicolas Dufresne wrote: > Hi, > > Le dimanche 05 novembre 2023 à 16:55 +0000, Jonas Karlman a écrit : >> Add NV15 and NV20 pixel formats used by the Rockchip Video Decoder for >> 10-bit buffers. >> >> NV15 and NV20 is 10-bit 4:2:0/4:2:2 semi-planar YUV formats similar to >> NV12 and NV16, using 10-bit components with no padding between each >> component. Instead, a group of 4 luminance/chrominance samples are >> stored over 5 bytes in little endian order: >> >> YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes >> >> The '15' and '20' suffix refers to the optimum effective bits per pixel >> which is achieved when the total number of luminance samples is a >> multiple of 8 for NV15 and 4 for NV20. > > I had this mostly documented already in September: > > https://patchwork.linuxtv.org/project/linux-media/patch/20230914150651.3114134-3-nicolas.dufresne@collabora.com/ > https://patchwork.linuxtv.org/project/linux-media/patch/20230914150651.3114134-4-nicolas.dufresne@collabora.com/ > > I think I was improving a bit the documentation avoiding to repeat what > NV15 (little and big endian) is over and over. I've had no feedback on > V2, so assumed it going to be picked, but then it will certainly > conflict with this change. Sorry, I had completely missed this pending series, sent out a short comment earlier and will rebase this on top of your series for v5. > >> >> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> >> --- >> v4: >> - No change >> >> v3: >> - Use bpp and bpp_div instead of the misuse of block_w/block_h >> - Update documentation, expand to use full 4x4 sample image >> >> .../media/v4l/pixfmt-yuv-planar.rst | 128 ++++++++++++++++++ >> drivers/media/v4l2-core/v4l2-common.c | 2 + >> drivers/media/v4l2-core/v4l2-ioctl.c | 2 + >> include/uapi/linux/videodev2.h | 2 + >> 4 files changed, 134 insertions(+) >> >> diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst >> index 1840224faa41..4366cdcb970e 100644 >> --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst >> +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst >> @@ -79,6 +79,13 @@ All components are stored with the same number of bits per component. >> - Cr, Cb >> - Yes >> - Linear >> + * - V4L2_PIX_FMT_NV15 >> + - 'NV15' >> + - 10 >> + - 4:2:0 >> + - Cb, Cr >> + - Yes >> + - Linear > > I'd like to see 8 and 10bit formats grouped and not mixed. Sure, will fix in v5. > >> * - V4L2_PIX_FMT_NV12M >> - 'NM12' >> - 8 >> @@ -158,6 +165,13 @@ All components are stored with the same number of bits per component. >> - Cr, Cb >> - Yes >> - Linear >> + * - V4L2_PIX_FMT_NV20 >> + - 'NV20' >> + - 10 >> + - 4:2:2 >> + - Cb, Cr >> + - Yes >> + - Linear >> * - V4L2_PIX_FMT_NV16M >> - 'NM16' >> - 8 >> @@ -288,6 +302,57 @@ of the luma plane. >> - Cr\ :sub:`11` >> >> >> +.. _V4L2-PIX-FMT-NV15: >> + >> +NV15 >> +---- >> + >> +Semi-planar 10-bit YUV 4:2:0 format similar to NV12, using 10-bit components >> +with no padding between each component. A group of 4 components are stored over >> +5 bytes in little endian order. >> + >> +.. flat-table:: Sample 4x4 NV15 Image (1 byte per cell) >> + :header-rows: 0 >> + :stub-columns: 0 >> + >> + * - start + 0: >> + - Y'\ :sub:`00[7:0]` >> + - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]` >> + - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]` >> + - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]` >> + - Y'\ :sub:`03[9:2]` >> + * - start + 5: >> + - Y'\ :sub:`10[7:0]` >> + - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]` >> + - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]` >> + - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]` >> + - Y'\ :sub:`13[9:2]` >> + * - start + 10: >> + - Y'\ :sub:`20[7:0]` >> + - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]` >> + - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]` >> + - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]` >> + - Y'\ :sub:`23[9:2]` >> + * - start + 15: >> + - Y'\ :sub:`30[7:0]` >> + - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]` >> + - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]` >> + - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]` >> + - Y'\ :sub:`33[9:2]` >> + * - start + 20: >> + - Cb\ :sub:`00[7:0]` >> + - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]` >> + - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]` >> + - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]` >> + - Cr\ :sub:`01[9:2]` >> + * - start + 25: >> + - Cb\ :sub:`10[7:0]` >> + - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]` >> + - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]` >> + - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]` >> + - Cr\ :sub:`11[9:2]` >> + >> + >> .. _V4L2-PIX-FMT-NV12MT: >> .. _V4L2-PIX-FMT-NV12MT-16X16: >> .. _V4L2-PIX-FMT-NV12-4L4: >> @@ -500,6 +565,69 @@ number of lines as the luma plane. >> - Cr\ :sub:`32` >> >> >> +.. _V4L2-PIX-FMT-NV20: >> + >> +NV20 >> +---- >> + >> +Semi-planar 10-bit YUV 4:2:2 format similar to NV16, using 10-bit components >> +with no padding between each component. A group of 4 components are stored over >> +5 bytes in little endian order. >> + >> +.. flat-table:: Sample 4x4 NV20 Image (1 byte per cell) >> + :header-rows: 0 >> + :stub-columns: 0 >> + >> + * - start + 0: >> + - Y'\ :sub:`00[7:0]` >> + - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]` >> + - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]` >> + - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]` >> + - Y'\ :sub:`03[9:2]` >> + * - start + 5: >> + - Y'\ :sub:`10[7:0]` >> + - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]` >> + - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]` >> + - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]` >> + - Y'\ :sub:`13[9:2]` >> + * - start + 10: >> + - Y'\ :sub:`20[7:0]` >> + - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]` >> + - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]` >> + - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]` >> + - Y'\ :sub:`23[9:2]` >> + * - start + 15: >> + - Y'\ :sub:`30[7:0]` >> + - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]` >> + - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]` >> + - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]` >> + - Y'\ :sub:`33[9:2]` >> + * - start + 20: >> + - Cb\ :sub:`00[7:0]` >> + - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]` >> + - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]` >> + - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]` >> + - Cr\ :sub:`01[9:2]` >> + * - start + 25: >> + - Cb\ :sub:`10[7:0]` >> + - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]` >> + - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]` >> + - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]` >> + - Cr\ :sub:`11[9:2]` >> + * - start + 30: >> + - Cb\ :sub:`20[7:0]` >> + - Cr\ :sub:`20[5:0]`\ Cb\ :sub:`20[9:8]` >> + - Cb\ :sub:`21[3:0]`\ Cr\ :sub:`20[9:6]` >> + - Cr\ :sub:`21[1:0]`\ Cb\ :sub:`21[9:4]` >> + - Cr\ :sub:`21[9:2]` >> + * - start + 35: >> + - Cb\ :sub:`30[7:0]` >> + - Cr\ :sub:`30[5:0]`\ Cb\ :sub:`30[9:8]` >> + - Cb\ :sub:`31[3:0]`\ Cr\ :sub:`30[9:6]` >> + - Cr\ :sub:`31[1:0]`\ Cb\ :sub:`31[9:4]` >> + - Cr\ :sub:`31[9:2]` >> + >> + >> .. _V4L2-PIX-FMT-NV24: >> .. _V4L2-PIX-FMT-NV42: >> >> diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c >> index 834b426da8b1..c65ffab5800a 100644 >> --- a/drivers/media/v4l2-core/v4l2-common.c >> +++ b/drivers/media/v4l2-core/v4l2-common.c >> @@ -270,8 +270,10 @@ const struct v4l2_format_info *v4l2_format_info(u32 format) >> /* YUV planar formats */ >> { .format = V4L2_PIX_FMT_NV12, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 }, >> { .format = V4L2_PIX_FMT_NV21, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 }, >> + { .format = V4L2_PIX_FMT_NV15, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 10, 0, 0 }, .bpp_div = { 4, 4, 1, 1 }, .hdiv = 2, .vdiv = 2 }, >> { .format = V4L2_PIX_FMT_NV16, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 }, >> { .format = V4L2_PIX_FMT_NV61, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 }, >> + { .format = V4L2_PIX_FMT_NV20, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 10, 0, 0 }, .bpp_div = { 4, 4, 1, 1 }, .hdiv = 2, .vdiv = 1 }, >> { .format = V4L2_PIX_FMT_NV24, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 1, .vdiv = 1 }, >> { .format = V4L2_PIX_FMT_NV42, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 1, .vdiv = 1 }, >> { .format = V4L2_PIX_FMT_P010, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 2, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 }, >> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c >> index 9b1de54ce379..937434e5f2c1 100644 >> --- a/drivers/media/v4l2-core/v4l2-ioctl.c >> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c >> @@ -1347,8 +1347,10 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt) >> case V4L2_PIX_FMT_YUV48_12: descr = "12-bit YUV 4:4:4 Packed"; break; >> case V4L2_PIX_FMT_NV12: descr = "Y/UV 4:2:0"; break; >> case V4L2_PIX_FMT_NV21: descr = "Y/VU 4:2:0"; break; >> + case V4L2_PIX_FMT_NV15: descr = "10-bit Y/UV 4:2:0 (Packed)"; break; >> case V4L2_PIX_FMT_NV16: descr = "Y/UV 4:2:2"; break; >> case V4L2_PIX_FMT_NV61: descr = "Y/VU 4:2:2"; break; >> + case V4L2_PIX_FMT_NV20: descr = "10-bit Y/UV 4:2:2 (Packed)"; break; >> case V4L2_PIX_FMT_NV24: descr = "Y/UV 4:4:4"; break; >> case V4L2_PIX_FMT_NV42: descr = "Y/VU 4:4:4"; break; >> case V4L2_PIX_FMT_P010: descr = "10-bit Y/UV 4:2:0"; break; >> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h >> index c3d4e490ce7c..617340c43e40 100644 >> --- a/include/uapi/linux/videodev2.h >> +++ b/include/uapi/linux/videodev2.h >> @@ -638,8 +638,10 @@ struct v4l2_pix_format { >> /* two planes -- one Y, one Cr + Cb interleaved */ >> #define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ >> #define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */ >> +#define V4L2_PIX_FMT_NV15 v4l2_fourcc('N', 'V', '1', '5') /* 15 Y/CbCr 4:2:0 10-bit packed */ >> #define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */ >> #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ >> +#define V4L2_PIX_FMT_NV20 v4l2_fourcc('N', 'V', '2', '0') /* 20 Y/CbCr 4:2:2 10-bit packed */ > > Would make sense to group all semi planar 10bit together. Sure, will fix in v5. Regards, Jonas > >> #define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */ >> #define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */ >> #define V4L2_PIX_FMT_P010 v4l2_fourcc('P', '0', '1', '0') /* 24 Y/CbCr 4:2:0 10-bit per component */ > > regards, > Nicolas
diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst index 1840224faa41..4366cdcb970e 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst @@ -79,6 +79,13 @@ All components are stored with the same number of bits per component. - Cr, Cb - Yes - Linear + * - V4L2_PIX_FMT_NV15 + - 'NV15' + - 10 + - 4:2:0 + - Cb, Cr + - Yes + - Linear * - V4L2_PIX_FMT_NV12M - 'NM12' - 8 @@ -158,6 +165,13 @@ All components are stored with the same number of bits per component. - Cr, Cb - Yes - Linear + * - V4L2_PIX_FMT_NV20 + - 'NV20' + - 10 + - 4:2:2 + - Cb, Cr + - Yes + - Linear * - V4L2_PIX_FMT_NV16M - 'NM16' - 8 @@ -288,6 +302,57 @@ of the luma plane. - Cr\ :sub:`11` +.. _V4L2-PIX-FMT-NV15: + +NV15 +---- + +Semi-planar 10-bit YUV 4:2:0 format similar to NV12, using 10-bit components +with no padding between each component. A group of 4 components are stored over +5 bytes in little endian order. + +.. flat-table:: Sample 4x4 NV15 Image (1 byte per cell) + :header-rows: 0 + :stub-columns: 0 + + * - start + 0: + - Y'\ :sub:`00[7:0]` + - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]` + - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]` + - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]` + - Y'\ :sub:`03[9:2]` + * - start + 5: + - Y'\ :sub:`10[7:0]` + - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]` + - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]` + - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]` + - Y'\ :sub:`13[9:2]` + * - start + 10: + - Y'\ :sub:`20[7:0]` + - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]` + - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]` + - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]` + - Y'\ :sub:`23[9:2]` + * - start + 15: + - Y'\ :sub:`30[7:0]` + - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]` + - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]` + - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]` + - Y'\ :sub:`33[9:2]` + * - start + 20: + - Cb\ :sub:`00[7:0]` + - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]` + - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]` + - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]` + - Cr\ :sub:`01[9:2]` + * - start + 25: + - Cb\ :sub:`10[7:0]` + - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]` + - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]` + - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]` + - Cr\ :sub:`11[9:2]` + + .. _V4L2-PIX-FMT-NV12MT: .. _V4L2-PIX-FMT-NV12MT-16X16: .. _V4L2-PIX-FMT-NV12-4L4: @@ -500,6 +565,69 @@ number of lines as the luma plane. - Cr\ :sub:`32` +.. _V4L2-PIX-FMT-NV20: + +NV20 +---- + +Semi-planar 10-bit YUV 4:2:2 format similar to NV16, using 10-bit components +with no padding between each component. A group of 4 components are stored over +5 bytes in little endian order. + +.. flat-table:: Sample 4x4 NV20 Image (1 byte per cell) + :header-rows: 0 + :stub-columns: 0 + + * - start + 0: + - Y'\ :sub:`00[7:0]` + - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]` + - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]` + - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]` + - Y'\ :sub:`03[9:2]` + * - start + 5: + - Y'\ :sub:`10[7:0]` + - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]` + - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]` + - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]` + - Y'\ :sub:`13[9:2]` + * - start + 10: + - Y'\ :sub:`20[7:0]` + - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]` + - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]` + - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]` + - Y'\ :sub:`23[9:2]` + * - start + 15: + - Y'\ :sub:`30[7:0]` + - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]` + - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]` + - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]` + - Y'\ :sub:`33[9:2]` + * - start + 20: + - Cb\ :sub:`00[7:0]` + - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]` + - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]` + - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]` + - Cr\ :sub:`01[9:2]` + * - start + 25: + - Cb\ :sub:`10[7:0]` + - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]` + - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]` + - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]` + - Cr\ :sub:`11[9:2]` + * - start + 30: + - Cb\ :sub:`20[7:0]` + - Cr\ :sub:`20[5:0]`\ Cb\ :sub:`20[9:8]` + - Cb\ :sub:`21[3:0]`\ Cr\ :sub:`20[9:6]` + - Cr\ :sub:`21[1:0]`\ Cb\ :sub:`21[9:4]` + - Cr\ :sub:`21[9:2]` + * - start + 35: + - Cb\ :sub:`30[7:0]` + - Cr\ :sub:`30[5:0]`\ Cb\ :sub:`30[9:8]` + - Cb\ :sub:`31[3:0]`\ Cr\ :sub:`30[9:6]` + - Cr\ :sub:`31[1:0]`\ Cb\ :sub:`31[9:4]` + - Cr\ :sub:`31[9:2]` + + .. _V4L2-PIX-FMT-NV24: .. _V4L2-PIX-FMT-NV42: diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c index 834b426da8b1..c65ffab5800a 100644 --- a/drivers/media/v4l2-core/v4l2-common.c +++ b/drivers/media/v4l2-core/v4l2-common.c @@ -270,8 +270,10 @@ const struct v4l2_format_info *v4l2_format_info(u32 format) /* YUV planar formats */ { .format = V4L2_PIX_FMT_NV12, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 }, { .format = V4L2_PIX_FMT_NV21, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 }, + { .format = V4L2_PIX_FMT_NV15, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 10, 0, 0 }, .bpp_div = { 4, 4, 1, 1 }, .hdiv = 2, .vdiv = 2 }, { .format = V4L2_PIX_FMT_NV16, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 }, { .format = V4L2_PIX_FMT_NV61, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 }, + { .format = V4L2_PIX_FMT_NV20, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 10, 0, 0 }, .bpp_div = { 4, 4, 1, 1 }, .hdiv = 2, .vdiv = 1 }, { .format = V4L2_PIX_FMT_NV24, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 1, .vdiv = 1 }, { .format = V4L2_PIX_FMT_NV42, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 1, .vdiv = 1 }, { .format = V4L2_PIX_FMT_P010, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 2, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 }, diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c index 9b1de54ce379..937434e5f2c1 100644 --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c @@ -1347,8 +1347,10 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt) case V4L2_PIX_FMT_YUV48_12: descr = "12-bit YUV 4:4:4 Packed"; break; case V4L2_PIX_FMT_NV12: descr = "Y/UV 4:2:0"; break; case V4L2_PIX_FMT_NV21: descr = "Y/VU 4:2:0"; break; + case V4L2_PIX_FMT_NV15: descr = "10-bit Y/UV 4:2:0 (Packed)"; break; case V4L2_PIX_FMT_NV16: descr = "Y/UV 4:2:2"; break; case V4L2_PIX_FMT_NV61: descr = "Y/VU 4:2:2"; break; + case V4L2_PIX_FMT_NV20: descr = "10-bit Y/UV 4:2:2 (Packed)"; break; case V4L2_PIX_FMT_NV24: descr = "Y/UV 4:4:4"; break; case V4L2_PIX_FMT_NV42: descr = "Y/VU 4:4:4"; break; case V4L2_PIX_FMT_P010: descr = "10-bit Y/UV 4:2:0"; break; diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index c3d4e490ce7c..617340c43e40 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -638,8 +638,10 @@ struct v4l2_pix_format { /* two planes -- one Y, one Cr + Cb interleaved */ #define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ #define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */ +#define V4L2_PIX_FMT_NV15 v4l2_fourcc('N', 'V', '1', '5') /* 15 Y/CbCr 4:2:0 10-bit packed */ #define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */ #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ +#define V4L2_PIX_FMT_NV20 v4l2_fourcc('N', 'V', '2', '0') /* 20 Y/CbCr 4:2:2 10-bit packed */ #define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */ #define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */ #define V4L2_PIX_FMT_P010 v4l2_fourcc('P', '0', '1', '0') /* 24 Y/CbCr 4:2:0 10-bit per component */
Add NV15 and NV20 pixel formats used by the Rockchip Video Decoder for 10-bit buffers. NV15 and NV20 is 10-bit 4:2:0/4:2:2 semi-planar YUV formats similar to NV12 and NV16, using 10-bit components with no padding between each component. Instead, a group of 4 luminance/chrominance samples are stored over 5 bytes in little endian order: YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes The '15' and '20' suffix refers to the optimum effective bits per pixel which is achieved when the total number of luminance samples is a multiple of 8 for NV15 and 4 for NV20. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> --- v4: - No change v3: - Use bpp and bpp_div instead of the misuse of block_w/block_h - Update documentation, expand to use full 4x4 sample image .../media/v4l/pixfmt-yuv-planar.rst | 128 ++++++++++++++++++ drivers/media/v4l2-core/v4l2-common.c | 2 + drivers/media/v4l2-core/v4l2-ioctl.c | 2 + include/uapi/linux/videodev2.h | 2 + 4 files changed, 134 insertions(+)