@@ -45,7 +45,6 @@
/* quirks to control the device */
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
-#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
#define I2C_HID_QUIRK_BOGUS_IRQ BIT(4)
#define I2C_HID_QUIRK_RESET_ON_RESUME BIT(5)
#define I2C_HID_QUIRK_BAD_INPUT_SIZE BIT(6)
@@ -122,12 +121,6 @@ static const struct i2c_hid_quirks {
} i2c_hid_quirks[] = {
{ USB_VENDOR_ID_WEIDA, HID_ANY_ID,
I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
- { I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
- I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
- { I2C_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_VOYO_WINPAD_A15,
- I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
- { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_3118,
- I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
{ USB_VENDOR_ID_ALPS_JP, HID_ANY_ID,
I2C_HID_QUIRK_RESET_ON_RESUME },
{ I2C_VENDOR_ID_SYNAPTICS, I2C_PRODUCT_ID_SYNAPTICS_SYNA2393,
@@ -470,11 +463,11 @@ static int i2c_hid_start_hwreset(struct i2c_hid *ihid)
return ret;
}
-static int i2c_hid_finish_hwreset(struct i2c_hid *ihid)
+static int i2c_hid_finish_hwreset(struct i2c_hid *ihid, bool no_irq_after_reset)
{
int ret = 0;
- if (ihid->quirks & I2C_HID_QUIRK_NO_IRQ_AFTER_RESET) {
+ if (no_irq_after_reset) {
msleep(100);
clear_bit(I2C_HID_RESET_PENDING, &ihid->flags);
}
@@ -482,9 +475,9 @@ static int i2c_hid_finish_hwreset(struct i2c_hid *ihid)
i2c_hid_dbg(ihid, "%s: waiting...\n", __func__);
if (!wait_event_timeout(ihid->wait,
!test_bit(I2C_HID_RESET_PENDING, &ihid->flags),
- msecs_to_jiffies(5000))) {
- ret = -ENODATA;
- goto err_clear_reset;
+ msecs_to_jiffies(1000))) {
+ dev_warn(&ihid->client->dev, "device did not ack reset within 1000 ms\n");
+ clear_bit(I2C_HID_RESET_PENDING, &ihid->flags);
}
i2c_hid_dbg(ihid, "%s: finished.\n", __func__);
@@ -494,12 +487,6 @@ static int i2c_hid_finish_hwreset(struct i2c_hid *ihid)
mutex_unlock(&ihid->reset_lock);
return ret;
-
-err_clear_reset:
- clear_bit(I2C_HID_RESET_PENDING, &ihid->flags);
- i2c_hid_set_power(ihid, I2C_HID_PWR_SLEEP);
- mutex_unlock(&ihid->reset_lock);
- return ret;
}
static void i2c_hid_abort_hwreset(struct i2c_hid *ihid)
@@ -736,6 +723,7 @@ static int i2c_hid_parse(struct hid_device *hid)
struct i2c_client *client = hid->driver_data;
struct i2c_hid *ihid = i2c_get_clientdata(client);
struct i2c_hid_desc *hdesc = &ihid->hdesc;
+ bool no_irq_after_reset = false;
unsigned int rsize;
char *rdesc;
int ret;
@@ -764,6 +752,7 @@ static int i2c_hid_parse(struct hid_device *hid)
if (use_override) {
rdesc = use_override;
+ no_irq_after_reset = true;
i2c_hid_dbg(ihid, "Using a HID report descriptor override\n");
} else {
rdesc = kzalloc(rsize, GFP_KERNEL);
@@ -790,7 +779,7 @@ static int i2c_hid_parse(struct hid_device *hid)
* actually wait for the report-descriptor to be read before signalling
* reset completion.
*/
- ret = i2c_hid_finish_hwreset(ihid);
+ ret = i2c_hid_finish_hwreset(ihid, no_irq_after_reset);
if (ret)
goto out;
@@ -1005,7 +994,7 @@ static int i2c_hid_core_resume(struct i2c_hid *ihid)
if (ihid->quirks & I2C_HID_QUIRK_RESET_ON_RESUME) {
ret = i2c_hid_start_hwreset(ihid);
if (ret == 0)
- ret = i2c_hid_finish_hwreset(ihid);
+ ret = i2c_hid_finish_hwreset(ihid, false);
} else {
ret = i2c_hid_set_power(ihid, I2C_HID_PWR_ON);
}
Now that i2c-hid-core waits for the reset after reading the HID report descriptor, the I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirks appear to no longer be necessary (confirmed on one of the quirked models). Except on laptops where the HID report descriptor is missing and is provided by a DMI quirk instead. On these models the HID report descriptor is not read at all, so moving the wait for reset is a no-op. These laptops have 0911:5288 touchpads for which I2C_HID_QUIRK_NO_IRQ_AFTER_RESET was set, keep the existing behavior there. There might still be devices which really do not ack the reset at all, so to avoid this causing regressions also: 1. Change the wait for ack timeout from an error into a warning; and 2. Lower reset timeout from the very long 5s to 1s which should be plenty Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/hid/i2c-hid/i2c-hid-core.c | 29 +++++++++-------------------- 1 file changed, 9 insertions(+), 20 deletions(-)