diff mbox series

[v1] USB: dwc3: only call usb_phy_set_suspend in suspend/resume

Message ID 20231103102236.13656-1-francesco@dolcini.it
State New
Headers show
Series [v1] USB: dwc3: only call usb_phy_set_suspend in suspend/resume | expand

Commit Message

Francesco Dolcini Nov. 3, 2023, 10:22 a.m. UTC
From: Stefan Eichenberger <stefan.eichenberger@toradex.com>

Currently we have the following two call chains:
dwc3_probe -> dwc3_core_init -> dwc3_phy_init -> usb_phy_init
dwc3_probe -> dwc3_core_init -> dwc3_phy_power_on -> usb_phy_set_suspend

If we look at phy-generic we see the following calls:
usb_gen_phy_init -> regulator_enable
usb_gen_phy_init -> clk_prepare_enable

If we call usb_phy_set_suspend we call the following in phy-generic:
nop_set_suspend -> clk_prepare_enable
and we sent a patch to also call:
nop_set_suspend -> regulator_enable

Because clk_prepare_enable and regulator_enable do reference counting we
increased the reference counter of the clock and regulator to two. If we
want to put the system into suspend we only decrease the reference
counters by one and therefore the clock and regulator stay on.

This change fixes it by not calling usb_phy_set_suspend in
dwc3_phy_power_on but only in dwc3_suspend_common.

Fixes: 8ba007a971bb ("usb: dwc3: core: enable the USB2 and USB3 phy in probe")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
 drivers/usb/dwc3/core.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

Comments

Greg KH Nov. 3, 2023, 11:05 a.m. UTC | #1
On Fri, Nov 03, 2023 at 11:22:36AM +0100, Francesco Dolcini wrote:
> From: Stefan Eichenberger <stefan.eichenberger@toradex.com>
> 
> Currently we have the following two call chains:
> dwc3_probe -> dwc3_core_init -> dwc3_phy_init -> usb_phy_init
> dwc3_probe -> dwc3_core_init -> dwc3_phy_power_on -> usb_phy_set_suspend
> 
> If we look at phy-generic we see the following calls:
> usb_gen_phy_init -> regulator_enable
> usb_gen_phy_init -> clk_prepare_enable
> 
> If we call usb_phy_set_suspend we call the following in phy-generic:
> nop_set_suspend -> clk_prepare_enable
> and we sent a patch to also call:
> nop_set_suspend -> regulator_enable
> 
> Because clk_prepare_enable and regulator_enable do reference counting we
> increased the reference counter of the clock and regulator to two. If we
> want to put the system into suspend we only decrease the reference
> counters by one and therefore the clock and regulator stay on.
> 
> This change fixes it by not calling usb_phy_set_suspend in
> dwc3_phy_power_on but only in dwc3_suspend_common.
> 
> Fixes: 8ba007a971bb ("usb: dwc3: core: enable the USB2 and USB3 phy in probe")
> Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> ---
>  drivers/usb/dwc3/core.c | 17 +++++++----------
>  1 file changed, 7 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 9c6bf054f15d..fae24a9c480d 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -770,12 +770,9 @@ static int dwc3_phy_power_on(struct dwc3 *dwc)
>  {
>  	int ret;
>  
> -	usb_phy_set_suspend(dwc->usb2_phy, 0);
> -	usb_phy_set_suspend(dwc->usb3_phy, 0);
> -
>  	ret = phy_power_on(dwc->usb2_generic_phy);
>  	if (ret < 0)
> -		goto err_suspend_usb3_phy;
> +		return ret;
>  
>  	ret = phy_power_on(dwc->usb3_generic_phy);
>  	if (ret < 0)
> @@ -785,9 +782,6 @@ static int dwc3_phy_power_on(struct dwc3 *dwc)
>  
>  err_power_off_usb2_phy:
>  	phy_power_off(dwc->usb2_generic_phy);
> -err_suspend_usb3_phy:
> -	usb_phy_set_suspend(dwc->usb3_phy, 1);
> -	usb_phy_set_suspend(dwc->usb2_phy, 1);
>  
>  	return ret;
>  }
> @@ -796,9 +790,6 @@ static void dwc3_phy_power_off(struct dwc3 *dwc)
>  {
>  	phy_power_off(dwc->usb3_generic_phy);
>  	phy_power_off(dwc->usb2_generic_phy);
> -
> -	usb_phy_set_suspend(dwc->usb3_phy, 1);
> -	usb_phy_set_suspend(dwc->usb2_phy, 1);
>  }
>  
>  static int dwc3_clk_enable(struct dwc3 *dwc)
> @@ -2018,6 +2009,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>  		break;
>  	}
>  
> +	usb_phy_set_suspend(dwc->usb2_phy, 1);
> +	usb_phy_set_suspend(dwc->usb3_phy, 1);
> +
>  	return 0;
>  }
>  
> @@ -2027,6 +2021,9 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
>  	int		ret;
>  	u32		reg;
>  
> +	usb_phy_set_suspend(dwc->usb2_phy, 0);
> +	usb_phy_set_suspend(dwc->usb3_phy, 0);
> +
>  	switch (dwc->current_dr_role) {
>  	case DWC3_GCTL_PRTCAP_DEVICE:
>  		ret = dwc3_core_init_for_resume(dwc);
> -- 
> 2.25.1
> 
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- You have marked a patch with a "Fixes:" tag for a commit that is in an
  older released kernel, yet you do not have a cc: stable line in the
  signed-off-by area at all, which means that the patch will not be
  applied to any older kernel releases.  To properly fix this, please
  follow the documented rules in the
  Documentation/process/stable-kernel-rules.rst file for how to resolve
  this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot
Stefan Eichenberger Nov. 4, 2023, 11:51 a.m. UTC | #2
Hi Johan,

> From: Johan Hovold <johan@kernel.org>
> 
> On Fri, Nov 03, 2023 at 11:22:36AM +0100, Francesco Dolcini wrote:
> > From: Stefan Eichenberger <stefan.eichenberger@toradex.com>
> >
> > Currently we have the following two call chains:
> > dwc3_probe -> dwc3_core_init -> dwc3_phy_init -> usb_phy_init
> > dwc3_probe -> dwc3_core_init -> dwc3_phy_power_on -> usb_phy_set_suspend
> >
> > If we look at phy-generic we see the following calls:
> > usb_gen_phy_init -> regulator_enable
> > usb_gen_phy_init -> clk_prepare_enable
> >
> > If we call usb_phy_set_suspend we call the following in phy-generic:
> > nop_set_suspend -> clk_prepare_enable
> > and we sent a patch to also call:
> > nop_set_suspend -> regulator_enable
> >
> > Because clk_prepare_enable and regulator_enable do reference counting we
> > increased the reference counter of the clock and regulator to two. If we
> > want to put the system into suspend we only decrease the reference
> > counters by one and therefore the clock and regulator stay on.
> 
> No, this does not seem to be a correct description of the current
> implementation.
> 
> The driver always calls both usb_phy_set_suspend() and
> usb_phy_init()/usb_phy_shutdown() so those usage counters would still be
> balanced (e.g. see dwc3_core_init() and dwc3_core_exit()).
> 

You are right I missunderstood that part.

> When reviewing the driver I did find a bug in the xhci-plat driver which
> is likely the cause for the imbalance you're seeing. I just sent a fix
> here in case you want to give it a try:
> 
>         https://lore.kernel.org/lkml/20231103164323.14294-1-johan+linaro@kernel.org/

I tested it and it solves the issue we have. Thanks a lot for the fix!
Before the use count for our regulator always went up to 2 and now it is
1 as expected.
root@verdin-imx8mp-14773241:~# cat /sys/kernel/debug/regulator/CTRL_SLEEP_MOCI#/use_count
1

Also when going to suspend the regulator is turned off now. With the
suspend patch applied from us the use count will be one more but
everything still works as expected.

> 
> But, also, why are you using legacy PHYs? Which platform is this for?

We have an external hub that we want to turn off when the system goes
into suspend. For the i.MX8MM we use the phy-generic driver to achieve
this. When I saw that the dwc3 driver would support the phy-generic via
usb-phy, I thought we could use the same approach for the i.MX8MP and,
in the future, the AM62. Maybe I misunderstood, would the right solution
be to add a suspend function to the fsl,imx8mp-usb-phy driver and use
vbus instead? But what would we do for the AM62, as it doesn't have a
phy driver if I'm not mistaken.

Regards,
Stefan
Johan Hovold Nov. 6, 2023, 8:20 a.m. UTC | #3
On Sat, Nov 04, 2023 at 11:51:22AM +0000, Stefan Eichenberger wrote:
> > From: Johan Hovold <johan@kernel.org>

> > When reviewing the driver I did find a bug in the xhci-plat driver which
> > is likely the cause for the imbalance you're seeing. I just sent a fix
> > here in case you want to give it a try:
> > 
> >         https://lore.kernel.org/lkml/20231103164323.14294-1-johan+linaro@kernel.org/
> 
> I tested it and it solves the issue we have. Thanks a lot for the fix!
> Before the use count for our regulator always went up to 2 and now it is
> 1 as expected.
> root@verdin-imx8mp-14773241:~# cat /sys/kernel/debug/regulator/CTRL_SLEEP_MOCI#/use_count
> 1
> 
> Also when going to suspend the regulator is turned off now. With the
> suspend patch applied from us the use count will be one more but
> everything still works as expected.

Thanks for testing.

> > But, also, why are you using legacy PHYs? Which platform is this for?
> 
> We have an external hub that we want to turn off when the system goes
> into suspend. For the i.MX8MM we use the phy-generic driver to achieve
> this. When I saw that the dwc3 driver would support the phy-generic via
> usb-phy, I thought we could use the same approach for the i.MX8MP and,
> in the future, the AM62. Maybe I misunderstood, would the right solution
> be to add a suspend function to the fsl,imx8mp-usb-phy driver and use
> vbus instead? But what would we do for the AM62, as it doesn't have a
> phy driver if I'm not mistaken.

That's not how the phy driver is supposed be used, and for on-board hubs
we now have:

	drivers/usb/misc/onboard_usb_hub.c

Have you tried using that one instead?

Johan
Stefan Eichenberger Nov. 7, 2023, 9:42 a.m. UTC | #4
> From: Johan Hovold <johan@kernel.org>
> >
> > We have an external hub that we want to turn off when the system goes
> > into suspend. For the i.MX8MM we use the phy-generic driver to achieve
> > this. When I saw that the dwc3 driver would support the phy-generic via
> > usb-phy, I thought we could use the same approach for the i.MX8MP and,
> > in the future, the AM62. Maybe I misunderstood, would the right solution
> > be to add a suspend function to the fsl,imx8mp-usb-phy driver and use
> > vbus instead? But what would we do for the AM62, as it doesn't have a
> > phy driver if I'm not mistaken.
>
> That's not how the phy driver is supposed be used, and for on-board hubs
> we now have:
>
>         drivers/usb/misc/onboard_usb_hub.c
>
> Have you tried using that one instead?

Thanks for the tip. I have now tested it and it seems to work for our
use case. I will see if I can use it for the other devices as well.

Best regards,
Stefan
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9c6bf054f15d..fae24a9c480d 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -770,12 +770,9 @@  static int dwc3_phy_power_on(struct dwc3 *dwc)
 {
 	int ret;
 
-	usb_phy_set_suspend(dwc->usb2_phy, 0);
-	usb_phy_set_suspend(dwc->usb3_phy, 0);
-
 	ret = phy_power_on(dwc->usb2_generic_phy);
 	if (ret < 0)
-		goto err_suspend_usb3_phy;
+		return ret;
 
 	ret = phy_power_on(dwc->usb3_generic_phy);
 	if (ret < 0)
@@ -785,9 +782,6 @@  static int dwc3_phy_power_on(struct dwc3 *dwc)
 
 err_power_off_usb2_phy:
 	phy_power_off(dwc->usb2_generic_phy);
-err_suspend_usb3_phy:
-	usb_phy_set_suspend(dwc->usb3_phy, 1);
-	usb_phy_set_suspend(dwc->usb2_phy, 1);
 
 	return ret;
 }
@@ -796,9 +790,6 @@  static void dwc3_phy_power_off(struct dwc3 *dwc)
 {
 	phy_power_off(dwc->usb3_generic_phy);
 	phy_power_off(dwc->usb2_generic_phy);
-
-	usb_phy_set_suspend(dwc->usb3_phy, 1);
-	usb_phy_set_suspend(dwc->usb2_phy, 1);
 }
 
 static int dwc3_clk_enable(struct dwc3 *dwc)
@@ -2018,6 +2009,9 @@  static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 		break;
 	}
 
+	usb_phy_set_suspend(dwc->usb2_phy, 1);
+	usb_phy_set_suspend(dwc->usb3_phy, 1);
+
 	return 0;
 }
 
@@ -2027,6 +2021,9 @@  static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
 	int		ret;
 	u32		reg;
 
+	usb_phy_set_suspend(dwc->usb2_phy, 0);
+	usb_phy_set_suspend(dwc->usb3_phy, 0);
+
 	switch (dwc->current_dr_role) {
 	case DWC3_GCTL_PRTCAP_DEVICE:
 		ret = dwc3_core_init_for_resume(dwc);