diff mbox series

[v4,3/3] media: i2c: Add driver for THine THP7312

Message ID 20231017132103.9914-4-laurent.pinchart@ideasonboard.com
State New
Headers show
Series [v4,1/3] dt-bindings: media: Add bindings for THine THP7312 ISP | expand

Commit Message

Laurent Pinchart Oct. 17, 2023, 1:21 p.m. UTC
From: Paul Elder <paul.elder@ideasonboard.com>

The THP7312 is an external camera ISP from THine. Add a V4L2 subdev
driver for it.

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
Changes since v3:

- Move thp7312_get_regulators() to probe section
- Turn firmware update handlers static
- Wire up power management in struct driver
- Remove unnecessary double underscore function prefixes
- Configure CSI-2 lanes at stream on time
- Clean up naming of power management functions

Changes since v2:

- Make boot-mode property optional
- Fix dev_err_probe() usage in DT parsing
- Additional dev_err_probe() usage
- Use %u instead of %d for unsigned values
- Don't split lines unnecessarily
- Fix error handling in firmware upload initialization
- Use CCI helpers in firmware update code
- Fix runtime PM usage count
---
 MAINTAINERS                 |    1 +
 drivers/media/i2c/Kconfig   |   16 +
 drivers/media/i2c/Makefile  |    1 +
 drivers/media/i2c/thp7312.c | 2339 +++++++++++++++++++++++++++++++++++
 4 files changed, 2357 insertions(+)
 create mode 100644 drivers/media/i2c/thp7312.c

Comments

Sakari Ailus Oct. 27, 2023, 12:30 p.m. UTC | #1
Hi Laurent,

Thanks for the patchset.

On Tue, Oct 17, 2023 at 04:21:03PM +0300, Laurent Pinchart wrote:
> From: Paul Elder <paul.elder@ideasonboard.com>
> 
> The THP7312 is an external camera ISP from THine. Add a V4L2 subdev
> driver for it.
> 
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Changes since v3:
> 
> - Move thp7312_get_regulators() to probe section
> - Turn firmware update handlers static
> - Wire up power management in struct driver
> - Remove unnecessary double underscore function prefixes
> - Configure CSI-2 lanes at stream on time
> - Clean up naming of power management functions
> 
> Changes since v2:
> 
> - Make boot-mode property optional
> - Fix dev_err_probe() usage in DT parsing
> - Additional dev_err_probe() usage
> - Use %u instead of %d for unsigned values
> - Don't split lines unnecessarily
> - Fix error handling in firmware upload initialization
> - Use CCI helpers in firmware update code
> - Fix runtime PM usage count
> ---
>  MAINTAINERS                 |    1 +
>  drivers/media/i2c/Kconfig   |   16 +
>  drivers/media/i2c/Makefile  |    1 +
>  drivers/media/i2c/thp7312.c | 2339 +++++++++++++++++++++++++++++++++++
>  4 files changed, 2357 insertions(+)
>  create mode 100644 drivers/media/i2c/thp7312.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d2c15c0b22c7..1ba2e15111d6 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -21455,6 +21455,7 @@ S:	Maintained
>  T:	git git://linuxtv.org/media_tree.git
>  F:	Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
>  F:	Documentation/userspace-api/media/drivers/thp7312.rst
> +F:	drivers/media/i2c/thp7312.c
>  F:	include/uapi/linux/thp7312.h
>  
>  THUNDERBOLT DMA TRAFFIC TEST DRIVER
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 59ee0ca2c978..aa659bea91b3 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -628,6 +628,22 @@ source "drivers/media/i2c/et8ek8/Kconfig"
>  
>  endif
>  
> +menu "Camera ISPs"
> +	visible if MEDIA_CAMERA_SUPPORT
> +
> +config VIDEO_THP7312
> +	tristate "THine THP7312 support"
> +	depends on I2C
> +	select MEDIA_CONTROLLER
> +	select V4L2_CCI_I2C
> +	select V4L2_FWNODE
> +	select VIDEO_V4L2_SUBDEV_API
> +	help
> +	  This is a Video4Linux2 sensor-level driver for the THine
> +	  THP7312 ISP.
> +
> +endmenu
> +
>  menu "Lens drivers"
>  	visible if MEDIA_CAMERA_SUPPORT
>  
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index f5010f80a21f..5e67217ede45 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -128,6 +128,7 @@ obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
>  obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
>  obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o
>  obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o
> +obj-$(CONFIG_VIDEO_THP7312) += thp7312.o
>  obj-$(CONFIG_VIDEO_THS7303) += ths7303.o
>  obj-$(CONFIG_VIDEO_THS8200) += ths8200.o
>  obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o
> diff --git a/drivers/media/i2c/thp7312.c b/drivers/media/i2c/thp7312.c
> new file mode 100644
> index 000000000000..7d3de929079d
> --- /dev/null
> +++ b/drivers/media/i2c/thp7312.c
> @@ -0,0 +1,2339 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2021 THine Electronics, Inc.
> + * Copyright (C) 2023 Ideas on Board Oy
> + */
> +
> +#include <asm/unaligned.h>
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/firmware.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mtd/spi-nor.h>
> +#include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <linux/thp7312.h>

uapi/linux/thp7321.h ?

> +#include <linux/types.h>
> +
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-cci.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-subdev.h>
> +
> +/* ISP registers */
> +
> +#define	THP7312_REG_FIRMWARE_VERSION_1			CCI_REG8(0xf000)
> +#define THP7312_REG_CAMERA_STATUS			CCI_REG8(0xf001)
> +#define	THP7312_REG_FIRMWARE_VERSION_2			CCI_REG8(0xf005)
> +#define THP7312_REG_SET_OUTPUT_ENABLE			CCI_REG8(0xf008)
> +#define	THP7312_OUTPUT_ENABLE				0x01
> +#define	THP7312_OUTPUT_DISABLE				0x00

Some lines habe tabs above after #define. Use space instead? Same for some
lines below.

Register bit definitions may be useful to align differently though.

> +#define THP7312_REG_SET_OUTPUT_COLOR_COMPRESSION	CCI_REG8(0xf009)
> +#define THP7312_REG_SET_OUTPUT_COLOR_UYVY		0x00
> +#define THP7312_REG_SET_OUTPUT_COLOR_YUY2		0x04
> +#define	THP7312_REG_FLIP_MIRROR				CCI_REG8(0xf00c)
> +#define THP7312_REG_VIDEO_IMAGE_SIZE			CCI_REG8(0xf00d)
> +#define THP7312_VIDEO_IMAGE_SIZE_640x360		0x52
> +#define THP7312_VIDEO_IMAGE_SIZE_640x460		0x03
> +#define THP7312_VIDEO_IMAGE_SIZE_1280x720		0x0a
> +#define THP7312_VIDEO_IMAGE_SIZE_1920x1080		0x0b
> +#define THP7312_VIDEO_IMAGE_SIZE_3840x2160		0x0d
> +#define THP7312_VIDEO_IMAGE_SIZE_4160x3120		0x14
> +#define THP7312_VIDEO_IMAGE_SIZE_2016x1512		0x20
> +#define THP7312_VIDEO_IMAGE_SIZE_2048x1536		0x21
> +#define THP7312_REG_VIDEO_FRAME_RATE_MODE		CCI_REG8(0xf00f)
> +#define THP7312_VIDEO_FRAME_RATE_MODE1			0x80
> +#define THP7312_VIDEO_FRAME_RATE_MODE2			0x81
> +#define THP7312_VIDEO_FRAME_RATE_MODE3			0x82
> +#define THP7312_REG_SET_DRIVING_MODE			CCI_REG8(0xf010)
> +#define THP7312_REG_DRIVING_MODE_STATUS			CCI_REG8(0xf011)
> +#define THP7312_REG_JPEG_COMPRESSION_FACTOR		CCI_REG8(0xf01b)
> +#define THP7312_REG_AE_EXPOSURE_COMPENSATION		CCI_REG8(0xf022)
> +#define THP7312_REG_AE_FLICKER_MODE			CCI_REG8(0xf023)
> +#define THP7312_AE_FLICKER_MODE_50			0x00
> +#define THP7312_AE_FLICKER_MODE_60			0x01
> +#define THP7312_AE_FLICKER_MODE_DISABLE			0x80
> +#define THP7312_REG_AE_FIX_FRAME_RATE			CCI_REG8(0xf02e)
> +#define THP7312_REG_MANUAL_WB_RED_GAIN			CCI_REG8(0xf036)
> +#define THP7312_REG_MANUAL_WB_BLUE_GAIN			CCI_REG8(0xf037)
> +#define THP7312_REG_WB_MODE				CCI_REG8(0xf039)
> +#define THP7312_WB_MODE_AUTO				0x00
> +#define THP7312_WB_MODE_MANUAL				0x11
> +#define	THP7312_REG_MANUAL_FOCUS_POSITION		CCI_REG16(0xf03c)
> +#define	THP7312_REG_AF_CONTROL				CCI_REG8(0xf040)
> +#define	THP7312_REG_AF_CONTROL_AF			0x01
> +#define	THP7312_REG_AF_CONTROL_MANUAL			0x10
> +#define	THP7312_REG_AF_CONTROL_LOCK			0x80
> +#define THP7312_REG_AF_SETTING				CCI_REG8(0xf041)
> +/*
> + * TODO: Bits 4 and 5 seems to select between oneshot and continuous mode, and
> + * bits 6 and 7 to select the focus method. The value for continuous hybrid mode
> + * is an outlier, verify that it is correct.
> + */
> +#define THP7312_REG_AF_SETTING_ONESHOT_CONTRAST		0x00
> +#define THP7312_REG_AF_SETTING_ONESHOT_PDAF		0x40
> +#define THP7312_REG_AF_SETTING_ONESHOT_HYBRID		0x80
> +#define THP7312_REG_AF_SETTING_CONTINUOUS_CONTRAST	0x30
> +#define THP7312_REG_AF_SETTING_CONTINUOUS_PDAF		0x70
> +#define THP7312_REG_AF_SETTING_CONTINUOUS_HYBRID	0xf0
> +#define THP7312_REG_SATURATION				CCI_REG8(0xf052)
> +#define THP7312_REG_SHARPNESS				CCI_REG8(0xf053)
> +#define THP7312_REG_BRIGHTNESS				CCI_REG8(0xf056)
> +#define THP7312_REG_CONTRAST				CCI_REG8(0xf057)
> +#define THP7312_REG_NOISE_REDUCTION			CCI_REG8(0xf059)
> +
> +#define TH7312_REG_CUSTOM_MIPI_SET			CCI_REG8(0xf0f6)
> +#define TH7312_REG_CUSTOM_MIPI_STATUS			CCI_REG8(0xf0f7)
> +#define TH7312_REG_CUSTOM_MIPI_RD			CCI_REG8(0xf0f8)
> +#define TH7312_REG_CUSTOM_MIPI_TD			CCI_REG8(0xf0f9)
> +
> +/*
> + * Firmware update registers. Those use a different address space than the
> + * normal operation ISP registers.
> + */
> +
> +#define THP7312_REG_FW_DRIVABILITY			CCI_REG32(0xd65c)
> +#define THP7312_REG_FW_DEST_BANK_ADDR			CCI_REG32(0xff08)
> +#define THP7312_REG_FW_VERIFY_RESULT			CCI_REG8(0xff60)
> +#define THP7312_REG_FW_RESET_FLASH			CCI_REG8(0xff61)
> +#define THP7312_REG_FW_MEMORY_IO_SETTING		CCI_REG8(0xff62)
> +#define THP7312_FW_MEMORY_IO_GPIO0			1
> +#define THP7312_FW_MEMORY_IO_GPIO1			0
> +#define THP7312_REG_FW_CRC_RESULT			CCI_REG32(0xff64)
> +#define THP7312_REG_FW_STATUS				CCI_REG8(0xfffc)
> +
> +enum thp7312_focus_method {
> +	THP7312_FOCUS_METHOD_CONTRAST,
> +	THP7312_FOCUS_METHOD_PDAF,
> +	THP7312_FOCUS_METHOD_HYBRID,
> +};
> +
> +/*
> + * enum thp7312_focus_state - State of the focus handler
> + *
> + * @THP7312_FOCUS_STATE_MANUAL: Manual focus, controlled through the
> + *	V4L2_CID_FOCUS_ABSOLUTE control
> + * @THP7312_FOCUS_STATE_AUTO: Continuous auto-focus
> + * @THP7312_FOCUS_STATE_LOCKED: Lock the focus to a fixed position. This state
> + *	is entered when switching from auto to manual mode.
> + * @THP7312_FOCUS_STATE_ONESHOT: One-shot auto-focus
> + *
> + * Valid transitions are as follow:
> + *
> + * digraph fsm {
> + *         node [shape=circle];
> + *
> + *         manual [label="MANUAL"];
> + *         auto [label="AUTO"];
> + *         locked [label="LOCKED"];
> + *         oneshot [label="ONESHOT"];
> + *
> + *         manual -> auto [label="FOCUS_AUTO <- true"]
> + *         locked -> auto [label="FOCUS_AUTO <- true"]
> + *         oneshot -> auto [label="FOCUS_AUTO <- true"]
> + *         auto -> locked [label="FOCUS_AUTO <- false"]
> + *
> + *         locked -> manual [label="FOCUS_ABSOLUTE <- *"]
> + *         oneshot -> manual [label="FOCUS_ABSOLUTE <- *"]
> + *
> + *         manual -> oneshot [label="FOCUS_START <- *"]
> + *         locked -> oneshot [label="FOCUS_START <- *"]
> + * }
> + */
> +enum thp7312_focus_state {
> +	THP7312_FOCUS_STATE_MANUAL,
> +	THP7312_FOCUS_STATE_AUTO,
> +	THP7312_FOCUS_STATE_LOCKED,
> +	THP7312_FOCUS_STATE_ONESHOT,
> +};
> +
> +enum thp7312_boot_mode {
> +	THP7312_BOOT_MODE_2WIRE_SLAVE = 0,
> +	THP7312_BOOT_MODE_SPI_MASTER = 1,
> +};
> +
> +struct thp7312_frame_rate {
> +	u32 fps;
> +	u32 pixel_rate;
> +	u8 reg_frame_rate_mode;
> +};
> +
> +struct thp7312_mode_info {
> +	u32 width;
> +	u32 height;
> +	u8 reg_image_size;
> +	const struct thp7312_frame_rate *rates;
> +};
> +
> +static const u32 thp7312_colour_fmts[] = {
> +	MEDIA_BUS_FMT_YUYV8_1X16,
> +};
> +
> +/* regulator supplies */
> +static const char * const thp7312_supply_name[] = {
> +	"vddcore",
> +	"vhtermrx",
> +	"vddtx",
> +	"vddhost",
> +	"vddcmos",
> +	"vddgpio-0",
> +	"vddgpio-1",
> +};
> +
> +#define THP7312_NUM_SUPPLIES ARRAY_SIZE(thp7312_supply_name)

Plain use of ARRAY_SIZE() would be nice.

> +
> +static const struct thp7312_mode_info thp7312_mode_info_data[] = {
> +	{
> +		.width = 1920,
> +		.height = 1080,
> +		.reg_image_size = THP7312_VIDEO_IMAGE_SIZE_1920x1080,
> +		.rates = (const struct thp7312_frame_rate[]) {
> +			{ 30, 150000000, 0x81 },
> +			{ 60, 193750000, 0x82 },
> +			{ 0 }
> +		},
> +	}, {
> +		.width = 2048,
> +		.height = 1536,
> +		.reg_image_size = THP7312_VIDEO_IMAGE_SIZE_2048x1536,
> +		.rates = (const struct thp7312_frame_rate[]) {
> +			{ 30, 150000000, 0x81 },
> +			{ 0 }
> +		}
> +	}, {
> +		.width = 3840,
> +		.height = 2160,
> +		.reg_image_size = THP7312_VIDEO_IMAGE_SIZE_3840x2160,
> +		.rates = (const struct thp7312_frame_rate[]) {
> +			{ 30, 300000000, 0x81 },
> +			{ 0 }
> +		},
> +	}, {
> +		.width = 4160,
> +		.height = 3120,
> +		.reg_image_size = THP7312_VIDEO_IMAGE_SIZE_4160x3120,
> +		.rates = (const struct thp7312_frame_rate[]) {
> +			{ 20, 300000000, 0x81 },
> +			{ 0 }
> +		},
> +	},
> +};
> +
> +#define THP7312_NUM_MODES ARRAY_SIZE(thp7312_mode_info_data)

Same here.

> +
> +struct thp7312_device;
> +
> +struct thp7312_sensor_supply {
> +	const char *name;
> +	unsigned int post_delay_us;
> +};
> +
> +struct thp7312_sensor_info {
> +	const char *model;
> +	const char *name;
> +	unsigned int i2c_addr;
> +	const struct thp7312_sensor_supply *supplies;
> +};
> +
> +struct thp7312_sensor {
> +	struct thp7312_device *thp7312;
> +	unsigned int index;
> +	u8 data_lanes[4];
> +
> +	struct device_node *of_node;
> +	struct device *dev;
> +	unsigned int num_supplies;
> +	struct regulator_bulk_data *supplies;
> +};
> +
> +struct thp7312_device {
> +	struct device *dev;
> +	struct regmap *regmap;
> +
> +	struct v4l2_subdev sd;
> +	struct media_pad pad;
> +
> +	/* DT endpoint info */
> +	struct v4l2_fwnode_endpoint ep;
> +	struct gpio_desc *reset_gpio;
> +	struct regulator_bulk_data supplies[THP7312_NUM_SUPPLIES];
> +	struct clk *iclk;
> +
> +	const struct thp7312_sensor_info *sensor_info;
> +	struct thp7312_sensor sensors[1];
> +
> +	enum thp7312_boot_mode boot_mode;
> +
> +	struct v4l2_ctrl_handler ctrl_handler;
> +
> +	/* These are protected by v4l2 active state */
> +	const struct thp7312_mode_info *current_mode;
> +	const struct thp7312_frame_rate *current_rate;
> +
> +	struct {
> +		struct v4l2_ctrl *focus_auto;
> +		struct v4l2_ctrl *focus_absolute;
> +		struct v4l2_ctrl *focus_start;
> +		struct v4l2_ctrl *focus_method;
> +	};
> +
> +	enum thp7312_focus_state focus_state;
> +
> +	struct {
> +		struct v4l2_ctrl *noise_reduction_auto;
> +		struct v4l2_ctrl *noise_reduction_absolute;
> +	};
> +
> +	const char *fw_name;
> +	u8 *fw_data;
> +	size_t fw_size;
> +
> +	u8 fw_major_version;
> +	u8 fw_minor_version;
> +
> +	/* Lock to protect fw_cancel */
> +	struct mutex fw_lock;
> +	struct fw_upload *fwl;
> +	bool fw_cancel;

Arranging this right after fw_* would save some memory.

> +	u8 *fw_write_buf;
> +};
> +
> +static const struct thp7312_sensor_info thp7312_sensor_info[] = {
> +	{
> +		.model = "sony,imx258",
> +		.name = "imx258",
> +		.i2c_addr = 0x0,
> +		.supplies = (const struct thp7312_sensor_supply[]) {
> +			{ "dovdd", 0 },
> +			{ "avdd", 0 },
> +			{ "dvdd", 0 },
> +			{ NULL, 0 },
> +		},
> +	},
> +};
> +
> +static inline struct thp7312_device *to_thp7312_dev(struct v4l2_subdev *sd)
> +{
> +	return container_of(sd, struct thp7312_device, sd);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Device Access & Configuration
> + */
> +
> +#define thp7312_read_poll_timeout(dev, addr, val, cond, sleep_us, timeout_us) \
> +({ \
> +	int __ret, __err; \
> +	__ret = read_poll_timeout(cci_read, __err, __err || (cond), sleep_us, \
> +				  timeout_us, false, (dev)->regmap, addr, \
> +				  &(val), NULL); \
> +	__ret ? : __err; \
> +})
> +
> +static int thp7312_set_mipi_regs(struct thp7312_device *thp7312, u32 reg,
> +				 u8 *lanes, u8 num_lanes)
> +{
> +	u8 used_lanes = 0;
> +	u8 conv_lanes[4];
> +	u8 val;
> +	unsigned int i;
> +
> +	/*
> +	 * The value that we write to the register is the index in the
> +	 * data-lanes array, so we need to do a conversion. Do this in the same
> +	 * pass as validating data-lanes.
> +	 */
> +	for (i = 0; i < num_lanes; i++) {
> +		if (lanes[i] > 4)
> +			return -EINVAL;
> +
> +		if (used_lanes & (1 << lanes[i]))

				  1u

> +			return -EINVAL;
> +
> +		used_lanes |= 1 << lanes[i];
> +
> +		/*
> +		 * data-lanes is 1-indexed while we'll use 0-indexing for
> +		 * writing the register.
> +		 */
> +		conv_lanes[lanes[i] - 1] = i;
> +	}
> +
> +	val = ((conv_lanes[3] & 0x03) << 6) |
> +	      ((conv_lanes[2] & 0x03) << 4) |
> +	      ((conv_lanes[1] & 0x03) << 2) |
> +	       (conv_lanes[0] & 0x03);

You could construct val in the loop and drop conv_lanes altogether.

I.e.

		val |= (i & 0x03) << ((lanes[i] - 1) * 2);

And assign val to 0 in declaration.

> +
> +	return cci_write(thp7312->regmap, reg, val, NULL);
> +}
> +
> +static int thp7312_set_mipi_lanes(struct thp7312_device *thp7312)
> +{
> +	struct device *dev = thp7312->dev;
> +	int ret;
> +	u64 val;
> +
> +	ret = thp7312_set_mipi_regs(thp7312, TH7312_REG_CUSTOM_MIPI_RD,
> +				    thp7312->sensors[0].data_lanes,
> +				    ARRAY_SIZE(thp7312->sensors[0].data_lanes));
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to set RD MIPI lanes: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret  = thp7312_set_mipi_regs(thp7312, TH7312_REG_CUSTOM_MIPI_TD,
> +				     thp7312->ep.bus.mipi_csi2.data_lanes,
> +				     thp7312->ep.bus.mipi_csi2.num_data_lanes);
> +	if (ret)
> +		return ret;
> +
> +	ret = cci_write(thp7312->regmap, TH7312_REG_CUSTOM_MIPI_SET, 1, NULL);
> +	if (ret)
> +		return ret;
> +
> +	ret = thp7312_read_poll_timeout(thp7312, TH7312_REG_CUSTOM_MIPI_STATUS,
> +					val, val == 0x00, 100000, 2000000);
> +	if (ret) {
> +		dev_err(dev, "Failed to poll MIPI lane status: %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int thp7312_change_mode(struct thp7312_device *thp7312,
> +			       const struct thp7312_mode_info *mode,
> +			       const struct thp7312_frame_rate *rate)
> +{
> +	struct device *dev = thp7312->dev;
> +	u64 val = 0;
> +	int ret;
> +
> +	ret = thp7312_read_poll_timeout(thp7312, THP7312_REG_CAMERA_STATUS, val,
> +					val == 0x80, 20000, 200000);
> +	if (ret < 0) {
> +		dev_err(dev, "%s(): failed to poll ISP: %d\n", __func__, ret);
> +		return ret;
> +	}
> +
> +	cci_write(thp7312->regmap, THP7312_REG_VIDEO_IMAGE_SIZE,
> +		  mode->reg_image_size, &ret);
> +	cci_write(thp7312->regmap, THP7312_REG_VIDEO_FRAME_RATE_MODE,
> +		  rate->reg_frame_rate_mode, &ret);
> +	cci_write(thp7312->regmap, THP7312_REG_JPEG_COMPRESSION_FACTOR, 0x5e,
> +		  &ret);
> +	cci_write(thp7312->regmap, THP7312_REG_SET_DRIVING_MODE, 0x01, &ret);
> +
> +	if (ret)
> +		return ret;
> +
> +	ret = thp7312_read_poll_timeout(thp7312, THP7312_REG_DRIVING_MODE_STATUS,
> +					val, val == 0x01, 20000, 100000);
> +	if (ret < 0) {
> +		dev_err(dev, "%s(): failed\n", __func__);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int thp7312_set_framefmt(struct thp7312_device *thp7312,
> +				struct v4l2_mbus_framefmt *format)
> +{
> +	u8 val;
> +
> +	switch (format->code) {
> +	case MEDIA_BUS_FMT_UYVY8_1X16:
> +		/* YUV422, UYVY */
> +		val = THP7312_REG_SET_OUTPUT_COLOR_UYVY;
> +		break;
> +	case MEDIA_BUS_FMT_YUYV8_1X16:
> +		/* YUV422, YUYV */
> +		val = THP7312_REG_SET_OUTPUT_COLOR_YUY2;
> +		break;
> +	default:
> +		/* Should never happen */
> +		return -EINVAL;
> +	}
> +
> +	return cci_write(thp7312->regmap,
> +			 THP7312_REG_SET_OUTPUT_COLOR_COMPRESSION, val, NULL);
> +}
> +
> +static int thp7312_init_mode(struct thp7312_device *thp7312,
> +			     struct v4l2_subdev_state *sd_state)
> +{
> +	struct v4l2_mbus_framefmt *fmt;
> +	int ret;
> +
> +	fmt = v4l2_subdev_get_pad_format(&thp7312->sd, sd_state, 0);
> +
> +	ret = thp7312_set_framefmt(thp7312, fmt);
> +	if (ret)
> +		return ret;
> +
> +	return thp7312_change_mode(thp7312, thp7312->current_mode,
> +				   thp7312->current_rate);
> +}
> +
> +static int thp7312_stream_enable(struct thp7312_device *thp7312, int enable)
> +{
> +	return cci_write(thp7312->regmap, THP7312_REG_SET_OUTPUT_ENABLE,
> +			 enable ? THP7312_OUTPUT_ENABLE : THP7312_OUTPUT_DISABLE,
> +			 NULL);
> +}
> +
> +static int thp7312_check_status_stream_mode(struct thp7312_device *thp7312)
> +{
> +	struct device *dev = thp7312->dev;
> +	u64 status = 0;
> +	int ret;
> +
> +	while (status != 0x80) {
> +		ret = cci_read(thp7312->regmap, THP7312_REG_CAMERA_STATUS,
> +			       &status, NULL);
> +		if (ret)
> +			return ret;
> +
> +		if (status == 0x80) {
> +			dev_dbg(dev, "Camera initialization done\n");
> +			return 0;
> +		}
> +
> +		if (status != 0x00) {
> +			dev_err(dev, "Invalid camera status %llx\n", status);
> +			return -EINVAL;
> +		}
> +
> +		dev_dbg(dev, "Camera initializing...\n");
> +		usleep_range(70000, 80000);
> +	}
> +
> +	return 0;
> +}
> +
> +static void thp7312_reset(struct thp7312_device *thp7312)
> +{
> +	gpiod_set_value_cansleep(thp7312->reset_gpio, 1);
> +	/*
> +	 * TODO: Shorten this delay to just above the minimum of 8 clock
> +	 * cycles.
> +	 */

Wouldn't it be trivial to calculate this, knowing the clock frequency?

> +	fsleep(10000);
> +
> +	gpiod_set_value_cansleep(thp7312->reset_gpio, 0);
> +	/*
> +	 * TODO: The documentation states that the device needs 2ms to
> +	 * initialize after reset is deasserted. It then proceeds to load the
> +	 * firmware from the flash memory, which takes an unspecified amount of
> +	 * time. Check if this delay could be reduced.
> +	 */
> +	fsleep(300000);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Power Management
> + */
> +
> +static void thp7312_power_off_sensors(struct thp7312_device *thp7312)
> +{
> +	unsigned int i;
> +
> +	if (!thp7312->sensor_info->supplies)
> +		return;
> +
> +	for (i = 0; i < ARRAY_SIZE(thp7312->sensors); ++i) {
> +		struct thp7312_sensor *sensor = &thp7312->sensors[i];
> +
> +		regulator_bulk_disable(sensor->num_supplies, sensor->supplies);
> +	}
> +}
> +
> +static int thp7312_power_off(struct thp7312_device *thp7312)
> +{
> +	thp7312_power_off_sensors(thp7312);
> +	regulator_bulk_disable(THP7312_NUM_SUPPLIES, thp7312->supplies);
> +	clk_disable_unprepare(thp7312->iclk);
> +
> +	return 0;
> +}
> +
> +static int thp7312_power_on_sensors(struct thp7312_device *thp7312)
> +{
> +	struct thp7312_sensor *sensor;
> +	unsigned int i, j;
> +	int ret;
> +
> +	if (!thp7312->sensor_info->supplies)
> +		return 0;
> +
> +	for (i = 0; i < ARRAY_SIZE(thp7312->sensors); ++i) {
> +		sensor = &thp7312->sensors[i];
> +		ret = 0;
> +
> +		for (j = 0; j < sensor->num_supplies; ++j) {
> +			unsigned int delay;
> +
> +			/*
> +			 * We can't use regulator_bulk_enable() as it would
> +			 * enable all supplies in parallel, breaking the sensor
> +			 * power sequencing constraints.
> +			 */
> +			ret = regulator_enable(sensor->supplies[j].consumer);
> +			if (ret < 0) {
> +				dev_err(thp7312->dev,
> +					"Failed to enable supply %u for sensor %u\n",
> +					j, i);
> +				goto error;
> +			}
> +
> +			delay = thp7312->sensor_info->supplies[j].post_delay_us;
> +			usleep_range(delay, delay + 100);
> +		}
> +	}
> +
> +	return 0;
> +
> +error:
> +	for (; j > 0; --j)
> +		regulator_disable(sensor->supplies[j - 1].consumer);
> +
> +	for (; i > 0; --i) {
> +		sensor = &thp7312->sensors[i - 1];
> +		regulator_bulk_disable(sensor->num_supplies, sensor->supplies);
> +	}
> +
> +	return ret;
> +}
> +
> +static int __thp7312_power_on(struct thp7312_device *thp7312)
> +{
> +	struct device *dev = thp7312->dev;
> +	int ret;
> +
> +	ret = regulator_bulk_enable(THP7312_NUM_SUPPLIES, thp7312->supplies);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = clk_prepare_enable(thp7312->iclk);
> +	if (ret < 0) {
> +		dev_err(dev, "clk prepare enable failed\n");
> +		regulator_bulk_disable(THP7312_NUM_SUPPLIES, thp7312->supplies);
> +		return ret;
> +	}
> +
> +	/*
> +	 * We cannot assume that turning off and on again will reset, so do a
> +	 * software reset on power up.
> +	 */
> +	thp7312_reset(thp7312);
> +
> +	return 0;
> +}
> +
> +static int thp7312_power_on(struct thp7312_device *thp7312)
> +{
> +	int ret;
> +
> +	ret = __thp7312_power_on(thp7312);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = thp7312_check_status_stream_mode(thp7312);
> +	if (ret < 0)
> +		goto error;
> +
> +	ret = thp7312_power_on_sensors(thp7312);
> +	if (ret)
> +		goto error;
> +
> +	return 0;
> +
> +error:
> +	thp7312_power_off(thp7312);
> +	return ret;
> +}
> +
> +static int thp7312_pm_runtime_suspend(struct device *dev)
> +{
> +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> +
> +	return thp7312_power_off(thp7312);
> +}
> +
> +static int thp7312_pm_runtime_resume(struct device *dev)
> +{
> +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> +
> +	return thp7312_power_on(thp7312);
> +}
> +
> +static const struct dev_pm_ops thp7312_pm_ops = {
> +	SET_RUNTIME_PM_OPS(thp7312_pm_runtime_suspend,
> +			   thp7312_pm_runtime_resume, NULL)
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * V4L2 Subdev Operations
> + */
> +
> +static bool thp7312_find_bus_code(u32 code)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(thp7312_colour_fmts); ++i) {
> +		if (thp7312_colour_fmts[i] == code)
> +			return true;
> +	}
> +
> +	return false;
> +}
> +
> +static const struct thp7312_mode_info *
> +thp7312_find_mode(unsigned int width, unsigned int height, bool nearest)
> +{
> +	const struct thp7312_mode_info *mode;
> +
> +	mode = v4l2_find_nearest_size(thp7312_mode_info_data,
> +				      ARRAY_SIZE(thp7312_mode_info_data),
> +				      width, height, width, height);
> +
> +	if (!nearest && (mode->width != width || mode->height != height))
> +		return NULL;
> +
> +	return mode;
> +}
> +
> +static int thp7312_enum_mbus_code(struct v4l2_subdev *sd,
> +				  struct v4l2_subdev_state *sd_state,
> +				  struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	if (code->index >= ARRAY_SIZE(thp7312_colour_fmts))
> +		return -EINVAL;
> +
> +	code->code = thp7312_colour_fmts[code->index];
> +
> +	return 0;
> +}
> +
> +static int thp7312_enum_frame_size(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_state *sd_state,
> +				   struct v4l2_subdev_frame_size_enum *fse)
> +{
> +	if (!thp7312_find_bus_code(fse->code))
> +		return -EINVAL;
> +
> +	if (fse->index >= THP7312_NUM_MODES)
> +		return -EINVAL;
> +
> +	fse->min_width = thp7312_mode_info_data[fse->index].width;
> +	fse->max_width = fse->min_width;
> +	fse->min_height = thp7312_mode_info_data[fse->index].height;
> +	fse->max_height = fse->min_height;
> +
> +	return 0;
> +}
> +
> +static int thp7312_enum_frame_interval(struct v4l2_subdev *sd,
> +				       struct v4l2_subdev_state *sd_state,
> +				       struct v4l2_subdev_frame_interval_enum *fie)
> +{
> +	const struct thp7312_frame_rate *rate;
> +	const struct thp7312_mode_info *mode;
> +	unsigned int index = fie->index;
> +
> +	if (!thp7312_find_bus_code(fie->code))
> +		return -EINVAL;
> +
> +	mode = thp7312_find_mode(fie->width, fie->height, false);
> +	if (!mode)
> +		return -EINVAL;
> +
> +	for (rate = mode->rates; rate->fps; ++rate, --index) {
> +		if (!index) {
> +			fie->interval.numerator = 1;
> +			fie->interval.denominator = rate->fps;

Maybe a newline here?

> +			return 0;
> +		}
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static int thp7312_set_fmt(struct v4l2_subdev *sd,
> +			   struct v4l2_subdev_state *sd_state,
> +			   struct v4l2_subdev_format *format)
> +{
> +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> +	struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
> +	struct v4l2_mbus_framefmt *fmt;
> +	const struct thp7312_mode_info *mode;
> +
> +	if (!thp7312_find_bus_code(mbus_fmt->code))
> +		mbus_fmt->code = thp7312_colour_fmts[0];
> +
> +	mode = thp7312_find_mode(mbus_fmt->width, mbus_fmt->height, true);
> +
> +	fmt = v4l2_subdev_get_pad_format(&thp7312->sd, sd_state, 0);
> +
> +	fmt->code = mbus_fmt->code;
> +	fmt->width = mode->width;
> +	fmt->height = mode->height;
> +	fmt->colorspace = V4L2_COLORSPACE_SRGB;
> +	fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
> +	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
> +	fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
> +
> +	*mbus_fmt = *fmt;
> +
> +	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> +		thp7312->current_mode = mode;
> +		thp7312->current_rate = &mode->rates[0];
> +	}
> +
> +	return 0;
> +}
> +
> +static int thp7312_g_frame_interval(struct v4l2_subdev *sd,
> +				    struct v4l2_subdev_frame_interval *fi)
> +{
> +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> +	struct v4l2_subdev_state *sd_state;
> +
> +	sd_state = v4l2_subdev_lock_and_get_active_state(sd);
> +	fi->interval.numerator = 1;
> +	fi->interval.denominator = thp7312->current_rate->fps;
> +	v4l2_subdev_unlock_state(sd_state);
> +
> +	return 0;
> +}
> +
> +static int thp7312_s_frame_interval(struct v4l2_subdev *sd,
> +				    struct v4l2_subdev_frame_interval *fi)
> +{
> +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> +	const struct thp7312_mode_info *mode;
> +	const struct thp7312_frame_rate *best_rate = NULL;
> +	const struct thp7312_frame_rate *rate;
> +	struct v4l2_subdev_state *sd_state;
> +	unsigned int best_delta = UINT_MAX;
> +	unsigned int fps;
> +
> +	/* Avoid divisions by 0, pick the highest frame if the interval is 0. */
> +	fps = fi->interval.numerator
> +	    ? DIV_ROUND_CLOSEST(fi->interval.denominator, fi->interval.numerator)
> +	    : UINT_MAX;
> +
> +	sd_state = v4l2_subdev_lock_and_get_active_state(sd);
> +
> +	mode = thp7312->current_mode;
> +
> +	for (rate = mode->rates; rate->fps && best_delta; ++rate) {
> +		unsigned int delta = abs(rate->fps - fps);
> +
> +		if (delta <= best_delta) {
> +			best_delta = delta;
> +			best_rate = rate;
> +		}
> +	}
> +
> +	thp7312->current_rate = best_rate;
> +
> +	v4l2_subdev_unlock_state(sd_state);
> +
> +	fi->interval.numerator = 1;
> +	fi->interval.denominator = best_rate->fps;
> +
> +	return 0;
> +}
> +
> +static int thp7312_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> +	struct v4l2_subdev_state *sd_state;
> +	int ret;
> +
> +	sd_state = v4l2_subdev_lock_and_get_active_state(sd);
> +
> +	if (!enable) {
> +		thp7312_stream_enable(thp7312, enable);

I'd use:

					       0);

as enable is known to be 0 here.

> +		pm_runtime_put(thp7312->dev);
> +		v4l2_subdev_unlock_state(sd_state);

Newline here?

> +		return 0;
> +	}
> +
> +	ret = pm_runtime_resume_and_get(thp7312->dev);
> +	if (ret)
> +		goto finish_unlock;
> +
> +	ret = thp7312_set_mipi_lanes(thp7312);
> +	if (ret)
> +		goto finish_pm;
> +
> +	ret = thp7312_init_mode(thp7312, sd_state);
> +	if (ret)
> +		goto finish_pm;
> +
> +	ret = __v4l2_ctrl_handler_setup(&thp7312->ctrl_handler);
> +	if (ret)
> +		goto finish_pm;
> +
> +	ret = thp7312_stream_enable(thp7312, enable);
> +	if (ret)
> +		goto finish_pm;
> +
> +	goto finish_unlock;
> +
> +finish_pm:
> +	pm_runtime_put(thp7312->dev);
> +finish_unlock:
> +	v4l2_subdev_unlock_state(sd_state);
> +
> +	return ret;
> +}
> +
> +static int thp7312_init_cfg(struct v4l2_subdev *sd,
> +			    struct v4l2_subdev_state *sd_state)
> +{
> +	const struct thp7312_mode_info *default_mode = &thp7312_mode_info_data[0];
> +	struct v4l2_mbus_framefmt *fmt;
> +
> +	fmt = v4l2_subdev_get_pad_format(sd, sd_state, 0);
> +
> +	/*
> +	 * default init sequence initialize thp7312 to
> +	 * YUV422 YUYV VGA@30fps
> +	 */
> +	fmt->code = MEDIA_BUS_FMT_YUYV8_1X16;
> +	fmt->colorspace = V4L2_COLORSPACE_SRGB;
> +	fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
> +	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
> +	fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
> +	fmt->width = default_mode->width;
> +	fmt->height = default_mode->height;
> +	fmt->field = V4L2_FIELD_NONE;
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_subdev_core_ops thp7312_core_ops = {
> +	.log_status = v4l2_ctrl_subdev_log_status,
> +	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> +	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
> +};
> +
> +static const struct v4l2_subdev_video_ops thp7312_video_ops = {
> +	.g_frame_interval = thp7312_g_frame_interval,
> +	.s_frame_interval = thp7312_s_frame_interval,
> +	.s_stream = thp7312_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops thp7312_pad_ops = {
> +	.enum_mbus_code = thp7312_enum_mbus_code,
> +	.init_cfg = thp7312_init_cfg,
> +	.get_fmt = v4l2_subdev_get_fmt,
> +	.set_fmt = thp7312_set_fmt,
> +	.enum_frame_size = thp7312_enum_frame_size,
> +	.enum_frame_interval = thp7312_enum_frame_interval,
> +};
> +
> +static const struct v4l2_subdev_ops thp7312_subdev_ops = {
> +	.core = &thp7312_core_ops,
> +	.video = &thp7312_video_ops,
> +	.pad = &thp7312_pad_ops,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * V4L2 Control Operations
> + */
> +
> +static inline struct thp7312_device *to_thp7312_from_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	return container_of(ctrl->handler, struct thp7312_device, ctrl_handler);
> +}
> +
> +/* 0: 3000cm, 18: 8cm */
> +static const u16 thp7312_focus_values[] = {
> +	3000, 1000, 600, 450, 350,
> +	290,  240,  200, 170, 150,
> +	140,  130,  120, 110, 100,
> +	93,   87,   83,  80,
> +};
> +
> +static int thp7312_set_focus(struct thp7312_device *thp7312)
> +{
> +	enum thp7312_focus_state new_state;
> +	bool continuous;
> +	u8 af_control;
> +	u8 af_setting;
> +	int ret = 0;
> +
> +	/* Start by programming the manual focus position if it has changed. */
> +	if (thp7312->focus_absolute->is_new) {
> +		unsigned int value;
> +
> +		value = thp7312_focus_values[thp7312->focus_absolute->val];
> +
> +		ret = cci_write(thp7312->regmap,
> +				THP7312_REG_MANUAL_FOCUS_POSITION, value, NULL);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	/* Calculate the new focus state. */
> +	switch (thp7312->focus_state) {
> +	case THP7312_FOCUS_STATE_MANUAL:
> +	default:
> +		if (thp7312->focus_auto->val)
> +			new_state = THP7312_FOCUS_STATE_AUTO;
> +		else if (thp7312->focus_start->is_new)
> +			new_state = THP7312_FOCUS_STATE_ONESHOT;
> +		break;
> +
> +	case THP7312_FOCUS_STATE_AUTO:
> +		if (!thp7312->focus_auto->val)
> +			new_state = THP7312_FOCUS_STATE_LOCKED;
> +		break;
> +
> +	case THP7312_FOCUS_STATE_LOCKED:
> +		if (thp7312->focus_auto->val)
> +			new_state = THP7312_FOCUS_STATE_AUTO;
> +		else if (thp7312->focus_start->is_new)
> +			new_state = THP7312_FOCUS_STATE_ONESHOT;
> +		else if (thp7312->focus_absolute->is_new)
> +			new_state = THP7312_FOCUS_STATE_MANUAL;
> +		break;
> +
> +	case THP7312_FOCUS_STATE_ONESHOT:
> +		if (thp7312->focus_auto->val)
> +			new_state = THP7312_FOCUS_STATE_AUTO;
> +		else if (thp7312->focus_start->is_new)
> +			new_state = THP7312_FOCUS_STATE_ONESHOT;
> +		else if (thp7312->focus_absolute->is_new)
> +			new_state = THP7312_FOCUS_STATE_MANUAL;
> +		break;
> +	}
> +
> +	/*
> +	 * If neither the state nor the focus method has changed, and no new
> +	 * one-shot focus is requested, there's nothing new to program to the
> +	 * hardware.
> +	 */
> +	if (thp7312->focus_state == new_state &&
> +	    !thp7312->focus_method->is_new && !thp7312->focus_start->is_new)
> +		return 0;
> +
> +	continuous = new_state == THP7312_FOCUS_STATE_MANUAL ||
> +		     new_state == THP7312_FOCUS_STATE_ONESHOT;
> +
> +	switch (thp7312->focus_method->val) {
> +	case THP7312_FOCUS_METHOD_CONTRAST:
> +	default:
> +		af_setting = continuous
> +			   ? THP7312_REG_AF_SETTING_CONTINUOUS_CONTRAST
> +			   : THP7312_REG_AF_SETTING_ONESHOT_CONTRAST;
> +		break;
> +	case THP7312_FOCUS_METHOD_PDAF:
> +		af_setting = continuous
> +			   ? THP7312_REG_AF_SETTING_CONTINUOUS_PDAF
> +			   : THP7312_REG_AF_SETTING_ONESHOT_PDAF;
> +		break;
> +	case THP7312_FOCUS_METHOD_HYBRID:
> +		af_setting = continuous
> +			   ? THP7312_REG_AF_SETTING_CONTINUOUS_HYBRID
> +			   : THP7312_REG_AF_SETTING_ONESHOT_HYBRID;
> +		break;
> +	}
> +
> +	switch (new_state) {
> +	case THP7312_FOCUS_STATE_MANUAL:
> +	default:
> +		af_control = THP7312_REG_AF_CONTROL_MANUAL;
> +		break;
> +	case THP7312_FOCUS_STATE_AUTO:
> +	case THP7312_FOCUS_STATE_ONESHOT:
> +		af_control = THP7312_REG_AF_CONTROL_AF;
> +		break;
> +	case THP7312_FOCUS_STATE_LOCKED:
> +		af_control = THP7312_REG_AF_CONTROL_LOCK;
> +		break;
> +	}
> +
> +	cci_write(thp7312->regmap, THP7312_REG_AF_SETTING, af_setting, &ret);
> +
> +	if (new_state == THP7312_FOCUS_STATE_MANUAL &&
> +	    (thp7312->focus_state == THP7312_FOCUS_STATE_AUTO ||
> +	     thp7312->focus_state == THP7312_FOCUS_STATE_ONESHOT)) {
> +		/* When switching to manual state, lock AF first. */
> +		cci_write(thp7312->regmap, THP7312_REG_AF_CONTROL,
> +			  THP7312_REG_AF_CONTROL_LOCK, &ret);
> +	}
> +
> +	cci_write(thp7312->regmap, THP7312_REG_AF_CONTROL, af_control, &ret);
> +
> +	if (ret)
> +		return ret;
> +
> +	thp7312->focus_state = new_state;
> +
> +	return 0;
> +}
> +
> +static int thp7312_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct thp7312_device *thp7312 = to_thp7312_from_ctrl(ctrl);
> +	struct device *dev = thp7312->dev;
> +	int ret = 0;
> +	u8 value;
> +
> +	if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE)
> +		return -EINVAL;
> +
> +	dev_dbg(dev, "s_ctrl id %s, value %d\n", ctrl->name, ctrl->val);
> +
> +	if (!pm_runtime_get_if_in_use(dev))
> +		return 0;
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_BRIGHTNESS:
> +		value = clamp_t(int, ctrl->val, -10, 10) + 10;

Is the clamping needed here? It looks like the control range is set up
correctly. And if it wasn't, it should be fixed there, not clamping here.

> +		cci_write(thp7312->regmap, THP7312_REG_BRIGHTNESS, value, &ret);
> +		break;
> +
> +	case V4L2_CID_THP7312_LOW_LIGHT_COMPENSATION:
> +		/* 0 = Auto adjust frame rate, 1 = Fix frame rate */
> +		value = ctrl->val ? 0 : 1;

You can simply use ctrl->val below.

> +		cci_write(thp7312->regmap, THP7312_REG_AE_FIX_FRAME_RATE, value,
> +			  &ret);
> +		break;
> +
> +	case V4L2_CID_FOCUS_AUTO:
> +	case V4L2_CID_FOCUS_ABSOLUTE:
> +	case V4L2_CID_AUTO_FOCUS_START:
> +	case V4L2_CID_THP7312_AUTO_FOCUS_METHOD:
> +		ret = thp7312_set_focus(thp7312);
> +		break;
> +
> +	case V4L2_CID_ROTATE:
> +		if (ctrl->val == 0)
> +			value = 0; /* 0 degree. camera is set to normal.*/
> +		else
> +			value = 3; /* 180 degree. camera is set to flip & mirror */
> +
> +		cci_write(thp7312->regmap, THP7312_REG_FLIP_MIRROR, value, &ret);

..., ctrl->val ? 3 : 0, ...

Up to you. The comment is worth having IMO.

> +		break;
> +
> +	case V4L2_CID_THP7312_NOISE_REDUCTION_AUTO:
> +	case V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE:
> +		/* Ignore the manually set value if auto has been set */
> +		value = thp7312->noise_reduction_auto->val
> +		      ? 0 : 0x80 | (thp7312->noise_reduction_absolute->val & 0x7f);

"?" should be on the preceding line.

> +
> +		cci_write(thp7312->regmap, THP7312_REG_NOISE_REDUCTION, value,
> +			  &ret);
> +		break;
> +
> +	case V4L2_CID_AUTO_WHITE_BALANCE:
> +		value = ctrl->val ? THP7312_WB_MODE_AUTO : THP7312_WB_MODE_MANUAL;

I'd do this in the call, up to you.

> +
> +		cci_write(thp7312->regmap, THP7312_REG_WB_MODE, value, &ret);
> +		break;
> +
> +	case V4L2_CID_RED_BALANCE:
> +		cci_write(thp7312->regmap, THP7312_REG_MANUAL_WB_RED_GAIN,
> +			  ctrl->val, &ret);
> +		break;
> +
> +	case V4L2_CID_BLUE_BALANCE:
> +		cci_write(thp7312->regmap, THP7312_REG_MANUAL_WB_BLUE_GAIN,
> +			  ctrl->val, &ret);
> +		break;
> +
> +	case V4L2_CID_AUTO_EXPOSURE_BIAS:
> +		cci_write(thp7312->regmap, THP7312_REG_AE_EXPOSURE_COMPENSATION,
> +			  ctrl->val, &ret);
> +		break;
> +
> +	case V4L2_CID_POWER_LINE_FREQUENCY:
> +		if (ctrl->val == V4L2_CID_POWER_LINE_FREQUENCY_60HZ) {
> +			value = THP7312_AE_FLICKER_MODE_60;
> +		} else if (ctrl->val == V4L2_CID_POWER_LINE_FREQUENCY_50HZ) {
> +			value = THP7312_AE_FLICKER_MODE_50;
> +		} else {
> +			if (thp7312->fw_major_version == 40 && thp7312->fw_minor_version == 03) {
> +				/* THP7312_AE_FLICKER_MODE_DISABLE is not supported */
> +				value = THP7312_AE_FLICKER_MODE_50;
> +			} else {
> +				value = THP7312_AE_FLICKER_MODE_DISABLE;
> +			}
> +		}
> +
> +		cci_write(thp7312->regmap, THP7312_REG_AE_FLICKER_MODE,
> +			  value, &ret);
> +		break;
> +
> +	case V4L2_CID_SATURATION:
> +		cci_write(thp7312->regmap, THP7312_REG_SATURATION,
> +			  ctrl->val, &ret);
> +		break;
> +
> +	case V4L2_CID_CONTRAST:
> +		cci_write(thp7312->regmap, THP7312_REG_CONTRAST,
> +			  ctrl->val, &ret);
> +		break;
> +
> +	case V4L2_CID_SHARPNESS:
> +		cci_write(thp7312->regmap, THP7312_REG_SHARPNESS,
> +			  ctrl->val, &ret);
> +		break;
> +
> +	default:
> +		break;
> +	}
> +
> +	pm_runtime_put(dev);
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops thp7312_ctrl_ops = {
> +	.s_ctrl = thp7312_s_ctrl,
> +};
> +
> +/*
> + * Refer to Documentation/userspace-api/media/drivers/thp7312.rst for details.
> + *
> + * TODO: Do we actually need this control, or could we hardcode the method to
> + * contrast-based when the sensor doesn't support PDAF (as it would be the only
> + * option in that case), and hybrid mode otherwise ?
> + */
> +static const struct v4l2_ctrl_config thp7312_ctrl_focus_method = {
> +	.ops = &thp7312_ctrl_ops,
> +	.id = V4L2_CID_THP7312_AUTO_FOCUS_METHOD,
> +	.name = "Auto-Focus Method",
> +	.type = V4L2_CTRL_TYPE_INTEGER,
> +	.min = 0,
> +	.def = 2,
> +	.max = 2,
> +	.step = 1,
> +};
> +
> +static const struct v4l2_ctrl_config thp7312_v4l2_ctrls_custom[] = {
> +	{
> +		.ops = &thp7312_ctrl_ops,
> +		.id = V4L2_CID_THP7312_LOW_LIGHT_COMPENSATION,
> +		.name = "Low Light Compensation",
> +		.type = V4L2_CTRL_TYPE_BOOLEAN,
> +		.min = 0,
> +		.def = 1,
> +		.max = 1,
> +		.step = 1,
> +	}, {
> +		.ops = &thp7312_ctrl_ops,
> +		.id = V4L2_CID_THP7312_NOISE_REDUCTION_AUTO,
> +		.name = "Noise Reduction Auto",
> +		.type = V4L2_CTRL_TYPE_BOOLEAN,
> +		.min = 0,
> +		.def = 1,
> +		.max = 1,
> +		.step = 1,
> +	}, {
> +		.ops = &thp7312_ctrl_ops,
> +		.id = V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE,
> +		.name = "Noise Reduction Level",
> +		.type = V4L2_CTRL_TYPE_INTEGER,
> +		.min = 0,
> +		.def = 0,
> +		.max = 10,
> +		.step = 1,
> +	},
> +};
> +
> +static const s64 exp_bias_qmenu[] = {
> +	-2000, -1667, -1333, -1000, -667, -333, 0, 333, 667, 1000, 1333, 1667, 2000
> +};
> +
> +static int thp7312_init_controls(struct thp7312_device *thp7312)
> +{
> +	struct v4l2_ctrl_handler *hdl = &thp7312->ctrl_handler;
> +	struct device *dev = thp7312->dev;
> +	struct v4l2_fwnode_device_properties props;
> +	unsigned int i;
> +	int ret;
> +
> +	thp7312->focus_state = THP7312_FOCUS_STATE_MANUAL;
> +
> +	v4l2_ctrl_handler_init(hdl, 16 + ARRAY_SIZE(thp7312_v4l2_ctrls_custom));
> +
> +	/*
> +	 * TODO: Don't expose focus controls if the sensor module doesn't have
> +	 * focus support.
> +	 */
> +	thp7312->focus_auto = v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops,
> +						V4L2_CID_FOCUS_AUTO,
> +						0, 1, 1, 1);
> +	thp7312->focus_absolute =
> +		v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_FOCUS_ABSOLUTE,
> +				  0, ARRAY_SIZE(thp7312_focus_values), 1, 0);
> +	thp7312->focus_method =
> +		v4l2_ctrl_new_custom(hdl, &thp7312_ctrl_focus_method, NULL);
> +
> +	thp7312->focus_start = v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops,
> +						 V4L2_CID_AUTO_FOCUS_START,
> +						 1, 1, 1, 1);
> +
> +	v4l2_ctrl_cluster(4, &thp7312->focus_auto);
> +
> +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_AUTO_WHITE_BALANCE,
> +			  0, 1, 1, 1);
> +	/* 32: 1x, 255: 7.95x */
> +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_RED_BALANCE,
> +			  32, 255, 1, 64);
> +	/* 32: 1x, 255: 7.95x */
> +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_BLUE_BALANCE,
> +			  32, 255, 1, 50);
> +
> +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_BRIGHTNESS,
> +			  -10, 10, 1, 0);
> +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_SATURATION,
> +			  0, 31, 1, 10);
> +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_CONTRAST,
> +			  0, 20, 1, 10);
> +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_SHARPNESS,
> +			  0, 31, 1, 8);
> +
> +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_ROTATE,
> +			  0, 180, 180, 0);
> +
> +	v4l2_ctrl_new_int_menu(hdl, &thp7312_ctrl_ops,
> +			       V4L2_CID_AUTO_EXPOSURE_BIAS,
> +			       ARRAY_SIZE(exp_bias_qmenu) - 1,
> +			       ARRAY_SIZE(exp_bias_qmenu) / 2, exp_bias_qmenu);
> +
> +	v4l2_ctrl_new_std_menu(hdl, &thp7312_ctrl_ops,
> +			       V4L2_CID_POWER_LINE_FREQUENCY,
> +			       V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0,
> +			       V4L2_CID_POWER_LINE_FREQUENCY_50HZ);
> +
> +	/* set properties from fwnode (e.g. rotation, orientation) */
> +	ret = v4l2_fwnode_device_parse(dev, &props);
> +	if (ret) {
> +		dev_err(dev, "Failed to parse fwnode: %d\n", ret);
> +		goto error;
> +	}
> +
> +	ret = v4l2_ctrl_new_fwnode_properties(hdl, &thp7312_ctrl_ops, &props);
> +	if (ret) {
> +		dev_err(dev, "Failed to create new v4l2 ctrl for fwnode properties: %d\n", ret);
> +		goto error;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(thp7312_v4l2_ctrls_custom); i++) {
> +		const struct v4l2_ctrl_config *ctrl_cfg =
> +			&thp7312_v4l2_ctrls_custom[i];
> +		struct v4l2_ctrl *ctrl;
> +
> +		ctrl = v4l2_ctrl_new_custom(hdl, ctrl_cfg, NULL);
> +
> +		if (ctrl_cfg->id == V4L2_CID_THP7312_NOISE_REDUCTION_AUTO)
> +			thp7312->noise_reduction_auto = ctrl;
> +		else if (ctrl_cfg->id == V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE)
> +			thp7312->noise_reduction_absolute = ctrl;
> +	}
> +
> +	v4l2_ctrl_cluster(2, &thp7312->noise_reduction_auto);
> +
> +	if (hdl->error) {
> +		dev_err(dev, "v4l2_ctrl_handler error\n");
> +		ret = hdl->error;
> +		goto error;
> +	}
> +
> +	return ret;
> +
> +error:
> +	v4l2_ctrl_handler_free(hdl);
> +	return ret;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Firmware Update
> + */
> +
> +/*
> + * The firmware data is made of 128kB of RAM firmware, followed by a
> + * variable-size "header". Both are stored in flash memory.
> + */
> +#define THP7312_FW_RAM_SIZE			(128 * 1024)
> +#define THP7312_FW_MIN_SIZE			(THP7312_FW_RAM_SIZE + 4)
> +#define THP7312_FW_MAX_SIZE			(THP7312_FW_RAM_SIZE + 64 * 1024)
> +
> +/*
> + * Data is first uploaded to the THP7312 128kB SRAM, and then written to flash.
> + * The SRAM is exposed over I2C as 32kB banks, and up to 4kB of data can be
> + * transferred in a single I2C write.
> + */
> +#define THP7312_RAM_BANK_SIZE			(32 * 1024)
> +#define THP7312_FW_DOWNLOAD_UNIT		(4 * 1024)
> +
> +#define THP7312_FLASH_MEMORY_ERASE_TIMEOUT	40
> +
> +#define THP7312_FLASH_MAX_REG_READ_SIZE		10
> +#define THP7312_FLASH_MAX_REG_DATA_SIZE		10
> +
> +static const u8 thp7312_cmd_config_flash_mem_if[] = {
> +	0xd5, 0x18, 0x00, 0x00, 0x00, 0x80
> +};
> +
> +static const u8 thp7312_cmd_write_to_reg[] = {
> +	0xd5, 0x0c, 0x80, 0x00, 0x00, 0x00
> +};
> +
> +static const u8 thp7312_cmd_read_reg[] = {
> +	0xd5, 0x04
> +};
> +
> +/*
> + * THP7312 Write data from RAM to Flash Memory
> + * Command ID FF700F
> + * Format: FF700F AA AA AA BB BB BB
> + * AA AA AA: destination start address
> + * BB BB BB: (write size - 1)
> + * Source address always starts from 0
> + */
> +static const u8 thp7312_cmd_write_ram_to_flash[] = { 0xff, 0x70, 0x0f };
> +
> +/*
> + * THP7312 Calculate CRC command
> + * Command ID: FF70 09
> + * Format: FF70 09 AA AA AA BB BB BB
> + * AA AA AA: Start address of calculation
> + * BB BB BB: (calculate size - 1)
> + */
> +static const u8 thp7312_cmd_calc_crc[] = { 0xff, 0x70, 0x09 };
> +
> +static const u8 thp7312_jedec_rdid[] = { SPINOR_OP_RDID, 0x00, 0x00, 0x00 };
> +static const u8 thp7312_jedec_rdsr[] = { SPINOR_OP_RDSR, 0x00, 0x00, 0x00 };
> +static const u8 thp7312_jedec_wen[] = { SPINOR_OP_WREN };
> +
> +static int thp7312_read_firmware_version(struct thp7312_device *thp7312)
> +{
> +	u64 val = 0;
> +	int ret = 0;
> +
> +	cci_read(thp7312->regmap, THP7312_REG_FIRMWARE_VERSION_1, &val, &ret);
> +	thp7312->fw_major_version = val;
> +
> +	cci_read(thp7312->regmap, THP7312_REG_FIRMWARE_VERSION_2, &val, &ret);
> +	thp7312->fw_minor_version = val;
> +
> +	return ret;
> +}
> +
> +static int thp7312_write_buf(struct thp7312_device *thp7312,
> +			     const u8 *write_buf, u16 write_size)
> +{
> +	struct i2c_client *client = to_i2c_client(thp7312->dev);
> +	int ret;
> +
> +	ret = i2c_master_send(client, write_buf, write_size);

A newline here would be nice.

> +	return ret >= 0 ? 0 : ret;
> +}
> +
> +static int __thp7312_flash_reg_write(struct thp7312_device *thp7312,
> +				     const u8 *write_buf, u16 write_size)
> +{
> +	struct device *dev = thp7312->dev;
> +	u8 temp_write_buf[THP7312_FLASH_MAX_REG_DATA_SIZE + 2];
> +	int ret;
> +
> +	if (write_size > THP7312_FLASH_MAX_REG_DATA_SIZE) {
> +		dev_err(dev, "%s: Write size error size = %d\n",
> +			__func__, write_size);
> +		return -EINVAL;
> +	}
> +
> +	ret = thp7312_write_buf(thp7312, thp7312_cmd_config_flash_mem_if,
> +				sizeof(thp7312_cmd_config_flash_mem_if));
> +	if (ret < 0) {
> +		dev_err(dev, "%s: Failed to config flash memory IF: %d\n",
> +			__func__, ret);
> +		return ret;
> +	}
> +
> +	temp_write_buf[0] = 0xd5;
> +	temp_write_buf[1] = 0x00;
> +	memcpy((temp_write_buf + 2), write_buf, write_size);
> +	ret = thp7312_write_buf(thp7312, temp_write_buf, write_size + 2);
> +	if (ret < 0)
> +		return ret;
> +
> +	thp7312_write_buf(thp7312, thp7312_cmd_write_to_reg,
> +			  sizeof(thp7312_cmd_write_to_reg));
> +
> +	return 0;
> +}
> +
> +static int __thp7312_flash_reg_read(struct thp7312_device *thp7312,
> +				    const u8 *write_buf, u16 write_size,
> +				    u8 *read_buf, u16 read_size)
> +{
> +	struct i2c_client *client = to_i2c_client(thp7312->dev);
> +	struct i2c_msg msgs[2];
> +	int ret;
> +
> +	ret = __thp7312_flash_reg_write(thp7312, write_buf, write_size);
> +	if (ret)
> +		return ret;
> +
> +	msgs[0].addr = client->addr;
> +	msgs[0].flags = 0;
> +	msgs[0].len = sizeof(thp7312_cmd_read_reg),
> +	msgs[0].buf = (u8 *)thp7312_cmd_read_reg;
> +
> +	msgs[1].addr = client->addr;
> +	msgs[1].flags = I2C_M_RD;
> +	msgs[1].len = read_size;
> +	msgs[1].buf = read_buf;
> +
> +	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> +	return ret >= 0 ? 0 : ret;
> +}
> +
> +#define thp7312_flash_reg_write(thp7312, wrbuf) \
> +	__thp7312_flash_reg_write(thp7312, wrbuf, sizeof(wrbuf))
> +
> +#define thp7312_flash_reg_read(thp7312, wrbuf, rdbuf) \
> +	__thp7312_flash_reg_read(thp7312, wrbuf, sizeof(wrbuf), \
> +				 rdbuf, sizeof(rdbuf))
> +
> +static enum fw_upload_err thp7312_fw_prepare_config(struct thp7312_device *thp7312)
> +{
> +	struct device *dev = thp7312->dev;
> +	int ret;
> +
> +	ret = cci_write(thp7312->regmap, THP7312_REG_FW_MEMORY_IO_SETTING,
> +			THP7312_FW_MEMORY_IO_GPIO0, NULL);
> +	if (ret) {
> +		dev_err(dev, "Failed to set flash memory I/O\n");
> +		return FW_UPLOAD_ERR_HW_ERROR;
> +	}
> +
> +	/* Set max drivability. */
> +	ret = cci_write(thp7312->regmap, THP7312_REG_FW_DRIVABILITY, 0x00777777,
> +			NULL);
> +	if (ret) {
> +		dev_err(dev, "Failed to set drivability: %d\n", ret);
> +		return FW_UPLOAD_ERR_HW_ERROR;
> +	}
> +
> +	return FW_UPLOAD_ERR_NONE;
> +}
> +
> +static enum fw_upload_err thp7312_fw_prepare_check(struct thp7312_device *thp7312)
> +{
> +	struct device *dev = thp7312->dev;
> +	u8 read_buf[3] = { 0 };
> +	int ret;
> +
> +	/* Get JEDEC ID */
> +	ret = thp7312_flash_reg_read(thp7312, thp7312_jedec_rdid, read_buf);
> +	if (ret) {
> +		dev_err(dev, "Failed to get JEDEC ID: %d\n", ret);
> +		return FW_UPLOAD_ERR_HW_ERROR;
> +	}
> +
> +	dev_dbg(dev, "Flash Memory: JEDEC ID = 0x%x 0x%x 0x%x\n",
> +		read_buf[0], read_buf[1], read_buf[2]);
> +
> +	return FW_UPLOAD_ERR_NONE;
> +}
> +
> +static enum fw_upload_err thp7312_fw_prepare_reset(struct thp7312_device *thp7312)
> +{
> +	struct device *dev = thp7312->dev;
> +	int ret;
> +
> +	ret = cci_write(thp7312->regmap, THP7312_REG_FW_RESET_FLASH, 0x81, NULL);
> +	if (ret) {
> +		dev_err(dev, "Failed to reset flash memory: %d\n", ret);
> +		return FW_UPLOAD_ERR_HW_ERROR;
> +	}
> +
> +	return FW_UPLOAD_ERR_NONE;
> +}
> +
> +/* TODO: Erase only the amount of blocks necessary */
> +static enum fw_upload_err thp7312_flash_erase(struct thp7312_device *thp7312)
> +{
> +	struct device *dev = thp7312->dev;
> +	u8 read_buf[1] = { 0 };
> +	unsigned int i;
> +	u8 block;
> +	int ret;
> +
> +	for (block = 0; block < 3; block++) {
> +		const u8 jedec_se[] = { SPINOR_OP_SE, block, 0x00, 0x00 };
> +
> +		ret = thp7312_flash_reg_write(thp7312, thp7312_jedec_wen);
> +		if (ret < 0) {
> +			dev_err(dev, "Failed to enable flash for writing\n");
> +			return FW_UPLOAD_ERR_RW_ERROR;
> +		}
> +
> +		ret = thp7312_flash_reg_write(thp7312, jedec_se);
> +		if (ret < 0) {
> +			dev_err(dev, "Failed to erase flash sector\n");
> +			return FW_UPLOAD_ERR_RW_ERROR;
> +		}
> +
> +		for (i = 0; i < THP7312_FLASH_MEMORY_ERASE_TIMEOUT; i++) {
> +			usleep_range(100000, 101000);
> +			thp7312_flash_reg_read(thp7312, thp7312_jedec_rdsr,
> +					       read_buf);
> +
> +			/* Check Busy bit. Busy == 0x0 means erase complete. */
> +			if (!(read_buf[0] & SR_WIP))
> +				break;
> +		}
> +
> +		if (i == THP7312_FLASH_MEMORY_ERASE_TIMEOUT)
> +			return FW_UPLOAD_ERR_TIMEOUT;
> +	}
> +
> +	thp7312_flash_reg_read(thp7312, thp7312_jedec_rdsr, read_buf);
> +
> +	/* Check WEL bit. */
> +	if (read_buf[0] & SR_WEL)
> +		return FW_UPLOAD_ERR_HW_ERROR;
> +
> +	return FW_UPLOAD_ERR_NONE;
> +}
> +
> +static enum fw_upload_err
> +thp7312_write_download_data_by_unit(struct thp7312_device *thp7312,
> +				    unsigned int addr, const u8 *data,
> +				    unsigned int size)
> +{
> +	struct device *dev = thp7312->dev;
> +	u8 *write_buf = thp7312->fw_write_buf;
> +	int ret;
> +
> +	dev_dbg(dev, "%s: addr = 0x%04x, data = 0x%p, size = %u\n",
> +		__func__, addr, data, size);
> +
> +	write_buf[0] = (addr >> 8) & 0xff;
> +	write_buf[1] = (addr >> 0) & 0xff;
> +	memcpy(&write_buf[2], data, size);
> +
> +	/*
> +	 * THP7312 Firmware download to RAM
> +	 * Command ID (address to download): 0x0000 - 0x7fff
> +	 * Format:: 0000 XX XX XX ........ XX
> +	 */
> +	ret = thp7312_write_buf(thp7312, write_buf, size + 2);
> +	if (ret < 0)
> +		dev_err(dev, "Unit transfer ERROR %s(): ret = %d\n", __func__, ret);
> +
> +	return ret >= 0 ? FW_UPLOAD_ERR_NONE : FW_UPLOAD_ERR_RW_ERROR;
> +}
> +
> +static enum fw_upload_err thp7312_fw_load_to_ram(struct thp7312_device *thp7312,
> +						 const u8 *data, u32 size)
> +{
> +	struct device *dev = thp7312->dev;
> +	enum fw_upload_err ret;
> +	unsigned int num_banks;
> +	unsigned int i, j;
> +
> +	num_banks = DIV_ROUND_UP(size, THP7312_RAM_BANK_SIZE);
> +
> +	dev_dbg(dev, "%s: loading %u bytes in SRAM (%u banks)\n", __func__,
> +		size, num_banks);
> +
> +	for (i = 0; i < num_banks; i++) {
> +		const u32 bank_addr = 0x10000000 | (i * THP7312_RAM_BANK_SIZE);
> +		unsigned int bank_size;
> +		unsigned int num_chunks;
> +
> +		ret = cci_write(thp7312->regmap, THP7312_REG_FW_DEST_BANK_ADDR,
> +				bank_addr, NULL);
> +		if (ret)
> +			return FW_UPLOAD_ERR_HW_ERROR;
> +
> +		bank_size = min_t(u32, size, THP7312_RAM_BANK_SIZE);
> +		num_chunks = DIV_ROUND_UP(bank_size, THP7312_FW_DOWNLOAD_UNIT);
> +
> +		dev_dbg(dev, "%s: loading %u bytes in SRAM bank %u (%u chunks)\n",
> +			__func__, bank_size, i, num_chunks);
> +
> +		for (j = 0 ; j < num_chunks; j++) {
> +			unsigned int chunk_addr;
> +			unsigned int chunk_size;
> +
> +			chunk_addr = j * THP7312_FW_DOWNLOAD_UNIT;
> +			chunk_size = min_t(u32, size, THP7312_FW_DOWNLOAD_UNIT);
> +
> +			ret = thp7312_write_download_data_by_unit(thp7312, chunk_addr,
> +								  data, chunk_size);
> +			if (ret != FW_UPLOAD_ERR_NONE) {
> +				dev_err(dev, "Unit transfer ERROR at bank transfer %s(): %d\n",
> +					__func__, j);
> +				return ret;
> +			}
> +
> +			data += chunk_size;
> +			size -= chunk_size;
> +		}
> +	}
> +
> +	return FW_UPLOAD_ERR_NONE;
> +}
> +
> +static enum fw_upload_err thp7312_fw_write_to_flash(struct thp7312_device *thp7312,
> +						    u32 dest, u32 write_size)
> +{
> +	u8 command[sizeof(thp7312_cmd_write_ram_to_flash) + 6];
> +	static const u32 cmd_size = sizeof(thp7312_cmd_write_ram_to_flash);
> +	u64 val;
> +	int ret;
> +
> +	memcpy(command, thp7312_cmd_write_ram_to_flash, cmd_size);
> +
> +	command[cmd_size] = (dest & 0xff0000) >> 16;
> +	command[cmd_size + 1] = (dest & 0x00ff00) >> 8;
> +	command[cmd_size + 2] = (dest & 0x0000ff);
> +	command[cmd_size + 3] = ((write_size - 1) & 0xff0000) >> 16;
> +	command[cmd_size + 4] = ((write_size - 1) & 0x00ff00) >> 8;
> +	command[cmd_size + 5] = ((write_size - 1) & 0x0000ff);
> +
> +	ret = thp7312_write_buf(thp7312, command, sizeof(command));
> +	if (ret < 0)
> +		return FW_UPLOAD_ERR_RW_ERROR;
> +
> +	usleep_range(8000000, 8100000);

I guess there's time to make some tea here?

> +
> +	ret = cci_read(thp7312->regmap, THP7312_REG_FW_VERIFY_RESULT, &val,
> +		       NULL);
> +	if (ret < 0)
> +		return FW_UPLOAD_ERR_RW_ERROR;
> +
> +	return val ?  FW_UPLOAD_ERR_HW_ERROR : FW_UPLOAD_ERR_NONE;
> +}
> +
> +static enum fw_upload_err thp7312_fw_check_crc(struct thp7312_device *thp7312,
> +					       const u8 *fw_data, u32 fw_size)
> +{
> +	struct device *dev = thp7312->dev;
> +	u16 header_size = fw_size - THP7312_FW_RAM_SIZE;
> +	u8 command[sizeof(thp7312_cmd_calc_crc) + 6];
> +	static const u32 cmd_size = sizeof(thp7312_cmd_calc_crc);
> +	u32 size = THP7312_FW_RAM_SIZE - 4;
> +	u32 fw_crc;
> +	u64 crc;
> +	int ret;
> +
> +	memcpy(command, thp7312_cmd_calc_crc, cmd_size);
> +
> +	command[cmd_size] = 0;
> +	command[cmd_size + 1] = (header_size >> 8) & 0xff;
> +	command[cmd_size + 2] = header_size & 0xff;
> +
> +	command[cmd_size + 3] = (size >> 16) & 0xff;
> +	command[cmd_size + 4] = (size >> 8) & 0xff;
> +	command[cmd_size + 5] = size & 0xff;
> +
> +	ret = thp7312_write_buf(thp7312, command, sizeof(command));
> +	if (ret < 0)
> +		return FW_UPLOAD_ERR_RW_ERROR;
> +
> +	usleep_range(2000000, 2100000);
> +
> +	fw_crc = get_unaligned_be32(&fw_data[fw_size - 4]);
> +
> +	ret = cci_read(thp7312->regmap, THP7312_REG_FW_CRC_RESULT, &crc, NULL);
> +	if (ret < 0)
> +		return FW_UPLOAD_ERR_RW_ERROR;
> +
> +	if (fw_crc != crc) {
> +		dev_err(dev, "CRC mismatch: firmware 0x%08x, flash 0x%08llx\n",
> +			fw_crc, crc);
> +		return FW_UPLOAD_ERR_HW_ERROR;
> +	}
> +
> +	return FW_UPLOAD_ERR_NONE;
> +}
> +
> +static enum fw_upload_err thp7312_fw_prepare(struct fw_upload *fw_upload,
> +					     const u8 *data, u32 size)
> +{
> +	struct thp7312_device *thp7312 = fw_upload->dd_handle;
> +	struct device *dev = thp7312->dev;
> +	enum fw_upload_err ret;
> +
> +	mutex_lock(&thp7312->fw_lock);
> +	thp7312->fw_cancel = false;
> +	mutex_unlock(&thp7312->fw_lock);
> +
> +	if (size < THP7312_FW_MIN_SIZE || size > THP7312_FW_MAX_SIZE) {
> +		dev_err(dev, "%s: Invalid firmware size %d; must be between %d and %d\n",
> +			__func__, size, THP7312_FW_MIN_SIZE, THP7312_FW_MAX_SIZE);
> +		return FW_UPLOAD_ERR_INVALID_SIZE;
> +	}
> +
> +	ret = thp7312_fw_prepare_config(thp7312);
> +	if (ret != FW_UPLOAD_ERR_NONE)
> +		return ret;
> +
> +	ret = thp7312_fw_prepare_check(thp7312);
> +	if (ret != FW_UPLOAD_ERR_NONE)
> +		return ret;
> +
> +	ret = thp7312_fw_prepare_reset(thp7312);
> +	if (ret != FW_UPLOAD_ERR_NONE)
> +		return ret;
> +
> +	mutex_lock(&thp7312->fw_lock);
> +	ret = thp7312->fw_cancel ? FW_UPLOAD_ERR_CANCELED : FW_UPLOAD_ERR_NONE;
> +	mutex_unlock(&thp7312->fw_lock);
> +
> +	return ret;
> +}
> +
> +static enum fw_upload_err thp7312_fw_write(struct fw_upload *fw_upload,
> +					   const u8 *data, u32 offset,
> +					   u32 size, u32 *written)
> +{
> +	struct thp7312_device *thp7312 = fw_upload->dd_handle;
> +	struct device *dev = thp7312->dev;
> +	u16 header_size = size - THP7312_FW_RAM_SIZE;
> +	enum fw_upload_err ret;
> +
> +	mutex_lock(&thp7312->fw_lock);
> +	if (thp7312->fw_cancel)
> +		return FW_UPLOAD_ERR_CANCELED;
> +	mutex_unlock(&thp7312->fw_lock);
> +
> +	ret = thp7312_flash_erase(thp7312);
> +	if (ret != FW_UPLOAD_ERR_NONE)
> +		return ret;
> +
> +	ret = thp7312_fw_load_to_ram(thp7312, data, THP7312_FW_RAM_SIZE);
> +	if (ret != FW_UPLOAD_ERR_NONE)
> +		return ret;
> +
> +	ret = thp7312_fw_write_to_flash(thp7312, 0, 0x1ffff);
> +	if (ret != FW_UPLOAD_ERR_NONE)
> +		return ret;
> +
> +	ret = thp7312_fw_load_to_ram(thp7312, data + THP7312_FW_RAM_SIZE, header_size);
> +	if (ret != FW_UPLOAD_ERR_NONE)
> +		return ret;
> +
> +	ret = thp7312_fw_write_to_flash(thp7312, 0x20000, header_size - 1);
> +	if (ret != FW_UPLOAD_ERR_NONE)
> +		return ret;
> +
> +	ret = thp7312_fw_check_crc(thp7312, data, size);
> +	if (ret != FW_UPLOAD_ERR_NONE)
> +		return ret;
> +
> +	dev_info(dev, "Successfully wrote firmware\n");
> +
> +	*written = size;
> +	return FW_UPLOAD_ERR_NONE;
> +}
> +
> +static enum fw_upload_err thp7312_fw_poll_complete(struct fw_upload *fw_upload)
> +{
> +	return FW_UPLOAD_ERR_NONE;
> +}
> +
> +/*
> + * This may be called asynchronously with an on-going update.  All other
> + * functions are called sequentially in a single thread. To avoid contention on
> + * register accesses, only update the cancel_request flag. Other functions will
> + * check this flag and handle the cancel request synchronously.
> + */
> +static void thp7312_fw_cancel(struct fw_upload *fw_upload)
> +{
> +	struct thp7312_device *thp7312 = fw_upload->dd_handle;
> +
> +	mutex_lock(&thp7312->fw_lock);
> +	thp7312->fw_cancel = true;
> +	mutex_unlock(&thp7312->fw_lock);
> +}
> +
> +static const struct fw_upload_ops thp7312_fw_upload_ops = {
> +	.prepare = thp7312_fw_prepare,
> +	.write = thp7312_fw_write,
> +	.poll_complete = thp7312_fw_poll_complete,
> +	.cancel = thp7312_fw_cancel,
> +};
> +
> +static int thp7312_register_flash_mode(struct thp7312_device *thp7312)
> +{
> +	struct device *dev = thp7312->dev;
> +	struct fw_upload *fwl;
> +	u64 val;
> +	int ret;
> +
> +	dev_info(dev, "booted in flash mode\n");
> +
> +	mutex_init(&thp7312->fw_lock);
> +
> +	thp7312->fw_write_buf = devm_kzalloc(dev, THP7312_FW_DOWNLOAD_UNIT + 2,
> +					     GFP_KERNEL);
> +	if (!thp7312->fw_write_buf)
> +		return -ENOMEM;
> +
> +	ret = __thp7312_power_on(thp7312);
> +	if (ret < 0)
> +		return dev_err_probe(dev, ret, "Failed to power on\n");
> +
> +	ret = cci_read(thp7312->regmap, THP7312_REG_FW_STATUS, &val, NULL);
> +	if (ret) {
> +		dev_err_probe(dev, ret, "Camera status read failed\n");
> +		goto error;
> +	}
> +
> +	fwl = firmware_upload_register(THIS_MODULE, dev, "thp7312-firmware",
> +				       &thp7312_fw_upload_ops, thp7312);
> +	if (IS_ERR(fwl)) {
> +		ret = PTR_ERR(fwl);
> +		dev_err_probe(dev, ret, "Failed to register firmware upload\n");
> +		goto error;
> +	}
> +
> +	thp7312->fwl = fwl;
> +	return 0;
> +
> +error:
> +	thp7312_power_off(thp7312);
> +	return ret;
> +}
> +
> +/* -----------------------------------------------------------------------------

/*
 * ...

I guess you could drop the dashes, too. Up to you.

> + * Probe & Remove
> + */
> +
> +static int thp7312_get_regulators(struct thp7312_device *thp7312)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < THP7312_NUM_SUPPLIES; i++)
> +		thp7312->supplies[i].supply = thp7312_supply_name[i];
> +
> +	return devm_regulator_bulk_get(thp7312->dev,
> +				       THP7312_NUM_SUPPLIES,
> +				       thp7312->supplies);
> +}
> +
> +static void thp7312_sensor_dev_release(struct device *dev)
> +{
> +	of_node_put(dev->of_node);
> +	kfree(dev);
> +}
> +
> +static int thp7312_sensor_init(struct thp7312_sensor *sensor, unsigned int index)
> +{
> +	struct thp7312_device *thp7312 = sensor->thp7312;
> +	struct device *dev = thp7312->dev;
> +	unsigned int i;
> +	int ret;
> +
> +	sensor->index = index;
> +
> +	/*
> +	 * Register a device for the sensor, to support usage of the regulator
> +	 * API.
> +	 */
> +	sensor->dev = kzalloc(sizeof(*sensor->dev), GFP_KERNEL);
> +	if (!sensor->dev)
> +		return -ENOMEM;
> +
> +	sensor->dev->parent = dev;
> +	sensor->dev->of_node = of_node_get(sensor->of_node);

This device could well find its way to a non-OF system. Could you use the
fwnode property API instead?

> +	sensor->dev->release = &thp7312_sensor_dev_release;
> +	dev_set_name(sensor->dev, "%s-%s.%u", dev_name(dev),
> +		     thp7312->sensor_info->name, index);
> +
> +	ret = device_register(sensor->dev);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to register device for sensor %u\n", index);
> +		put_device(sensor->dev);
> +		sensor->dev = NULL;
> +		return ret;
> +	}
> +
> +	/* Retrieve the power supplies for the sensor, if any. */
> +	if (thp7312->sensor_info->supplies) {
> +		const struct thp7312_sensor_supply *supplies =
> +			thp7312->sensor_info->supplies;
> +		unsigned int num_supplies;
> +
> +		for (num_supplies = 0; supplies[num_supplies].name; ++num_supplies)
> +			;
> +
> +		sensor->supplies = devm_kcalloc(dev, num_supplies,
> +						sizeof(*sensor->supplies),
> +						GFP_KERNEL);
> +		if (!sensor->supplies) {
> +			ret = -ENOMEM;
> +			goto error;
> +		}
> +
> +		for (i = 0; i < num_supplies; ++i)
> +			sensor->supplies[i].supply = supplies[i].name;
> +
> +		ret = regulator_bulk_get(sensor->dev, num_supplies,
> +					 sensor->supplies);
> +		if (ret < 0) {
> +			dev_err(dev, "Failed to get supplies for sensor %u\n", index);
> +			goto error;
> +		}
> +
> +		sensor->num_supplies = i;
> +	}
> +
> +	return 0;
> +
> +error:
> +	device_unregister(sensor->dev);
> +	return ret;
> +}
> +
> +static int thp7312_init_sensors(struct thp7312_device *thp7312)
> +{
> +	unsigned int i;
> +	int ret;
> +
> +	for (i = 0; i < ARRAY_SIZE(thp7312->sensors); i++) {
> +		struct thp7312_sensor *sensor = &thp7312->sensors[i];
> +
> +		if (!sensor->thp7312)
> +			continue;
> +
> +		ret = thp7312_sensor_init(sensor, i);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static void thp7312_sensor_cleanup(struct thp7312_sensor *sensor)
> +{
> +	if (sensor->num_supplies)
> +		regulator_bulk_free(sensor->num_supplies, sensor->supplies);
> +
> +	if (sensor->dev)
> +		device_unregister(sensor->dev);
> +	of_node_put(sensor->of_node);
> +}
> +
> +static void thp7312_remove_sensors(struct thp7312_device *thp7312)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(thp7312->sensors); i++) {
> +		struct thp7312_sensor *sensor = &thp7312->sensors[i];
> +
> +		if (!sensor->thp7312)
> +			continue;
> +
> +		thp7312_sensor_cleanup(sensor);
> +	}
> +}
> +
> +static int thp7312_sensor_parse_dt(struct thp7312_device *thp7312,
> +				   struct device_node *node)
> +{
> +	struct device *dev = thp7312->dev;
> +	struct thp7312_sensor *sensor;
> +	u32 data_lanes_rx[4];
> +	const char *model;
> +	unsigned int i;
> +	u32 reg;
> +	int ret;
> +
> +	if (!of_device_is_available(node))
> +		return -ENODEV;
> +
> +	/* Retrieve the sensor index from the reg property. */
> +	ret = of_property_read_u32(node, "reg", &reg);
> +	if (ret < 0) {
> +		dev_err(dev, "'reg' property missing in sensor node\n");

Shouldn't you assume it's zero instead?

> +		return -EINVAL;
> +	}
> +
> +	if (reg >= ARRAY_SIZE(thp7312->sensors)) {
> +		dev_err(dev, "Out-of-bounds 'reg' value %u\n", reg);
> +		return -EINVAL;
> +	}
> +
> +	sensor = &thp7312->sensors[reg];
> +	if (sensor->thp7312) {
> +		dev_err(dev, "Duplicate entry for sensor %u\n", reg);
> +		return -EINVAL;
> +	}
> +
> +	ret = of_property_read_string(node, "thine,model", &model);
> +	if (ret < 0) {
> +		dev_err(dev, "'thine,model' property missing in sensor node\n");
> +		return -EINVAL;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(thp7312_sensor_info); i++) {
> +		const struct thp7312_sensor_info *info =
> +			&thp7312_sensor_info[i];
> +
> +		if (!strcmp(info->model, model)) {
> +			thp7312->sensor_info = info;
> +			break;
> +		}
> +	}
> +
> +	if (!thp7312->sensor_info) {
> +		dev_err(dev, "Unsupported sensor model %s\n", model);
> +		return -EINVAL;
> +	}
> +
> +	ret = of_property_read_u32_array(node, "data-lanes",
> +					 data_lanes_rx, ARRAY_SIZE(data_lanes_rx));
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to read property data-lanes: %d\n", ret);
> +		return ret;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(sensor->data_lanes); i++)
> +		sensor->data_lanes[i] = (u8)data_lanes_rx[i];

I don't think you need the cast here.

> +
> +	sensor->thp7312 = thp7312;
> +	sensor->of_node = of_node_get(node);
> +
> +	return 0;
> +}
> +
> +static int thp7312_parse_dt(struct thp7312_device *thp7312)
> +{
> +	struct device *dev = thp7312->dev;
> +	struct fwnode_handle *endpoint;
> +	struct device_node *sensors;
> +	unsigned int num_sensors = 0;
> +	struct device_node *node;
> +	int ret;
> +
> +	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
> +	if (!endpoint)
> +		return dev_err_probe(dev, -EINVAL, "Endpoint node not found\n");
> +
> +	ret = v4l2_fwnode_endpoint_parse(endpoint, &thp7312->ep);

You should assign the bus_type before parsing. It is deprecated to guess
it --- there's no universal guarantee it'll be successful.

> +	fwnode_handle_put(endpoint);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Could not parse endpoint\n");
> +
> +	if (thp7312->ep.bus_type != V4L2_MBUS_CSI2_DPHY)
> +		return dev_err_probe(dev, -EINVAL, "Unsupported bus type %d\n",
> +				     thp7312->ep.bus_type);
> +
> +	/*
> +	 * The thine,boot-mode property is optional and default to
> +	 * THP7312_BOOT_MODE_SPI_MASTER (1).
> +	 */
> +	thp7312->boot_mode = THP7312_BOOT_MODE_SPI_MASTER;
> +	ret = of_property_read_u32(dev->of_node, "thine,boot-mode",
> +				   &thp7312->boot_mode);
> +	if (ret && ret != -EINVAL)
> +		return dev_err_probe(dev, ret, "Property '%s' is invalid\n",
> +				     "thine,boot-mode");
> +
> +	if (thp7312->boot_mode != THP7312_BOOT_MODE_2WIRE_SLAVE &&
> +	    thp7312->boot_mode != THP7312_BOOT_MODE_SPI_MASTER)
> +		return dev_err_probe(dev, -EINVAL, "Invalid '%s' value %u\n",
> +				     "thine,boot-mode", thp7312->boot_mode);
> +
> +	/* Sensors */
> +	sensors = of_get_child_by_name(dev->of_node, "sensors");
> +	if (!sensors) {
> +		dev_err(dev, "'sensors' child node not found\n");
> +		return -EINVAL;
> +	}
> +
> +	for_each_child_of_node(sensors, node) {
> +		if (of_node_name_eq(node, "sensor")) {
> +			if (!thp7312_sensor_parse_dt(thp7312, node))
> +				num_sensors++;
> +		}
> +	}
> +
> +	of_node_put(sensors);
> +
> +	if (!num_sensors) {
> +		dev_err(dev, "No sensor found\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int thp7312_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct thp7312_device *thp7312;
> +	int ret;
> +
> +	thp7312 = devm_kzalloc(dev, sizeof(*thp7312), GFP_KERNEL);
> +	if (!thp7312)
> +		return -ENOMEM;
> +
> +	thp7312->dev = dev;
> +
> +	thp7312->regmap = devm_cci_regmap_init_i2c(client, 16);
> +	if (IS_ERR(thp7312->regmap))
> +		return dev_err_probe(dev, PTR_ERR(thp7312->regmap),
> +				     "Unable to initialize I2C\n");
> +
> +	ret = thp7312_parse_dt(thp7312);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = thp7312_get_regulators(thp7312);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to get regulators\n");
> +
> +	thp7312->iclk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(thp7312->iclk))
> +		return dev_err_probe(dev, PTR_ERR(thp7312->iclk),
> +				     "Failed to get iclk\n");
> +
> +	thp7312->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> +	if (IS_ERR(thp7312->reset_gpio))
> +		return dev_err_probe(dev, PTR_ERR(thp7312->reset_gpio),
> +				     "Failed to get reset gpio\n");
> +
> +	/*
> +	 * TODO: Should we confirm that we're in the right boot mode or can we
> +	 * trust the dt? Or is it better to check just to protect the user from
> +	 * mistakes?
> +	 */
> +	if (thp7312->boot_mode == THP7312_BOOT_MODE_2WIRE_SLAVE)
> +		return thp7312_register_flash_mode(thp7312);
> +
> +	thp7312->current_mode = &thp7312_mode_info_data[0];
> +	thp7312->current_rate = &thp7312->current_mode->rates[0];
> +
> +	ret = thp7312_init_sensors(thp7312);
> +	if (ret < 0)
> +		return ret;
> +
> +	v4l2_i2c_subdev_init(&thp7312->sd, client, &thp7312_subdev_ops);
> +	thp7312->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
> +	thp7312->pad.flags = MEDIA_PAD_FL_SOURCE;
> +	thp7312->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +
> +	ret = media_entity_pads_init(&thp7312->sd.entity, 1, &thp7312->pad);
> +	if (ret)
> +		return ret;
> +
> +	ret = thp7312_power_on(thp7312);
> +	if (ret)
> +		goto entity_cleanup;
> +
> +	ret = thp7312_read_firmware_version(thp7312);
> +	if (ret < 0) {
> +		dev_err(dev, "Camera is not found\n");
> +		goto power_off;
> +	}
> +
> +	ret = thp7312_init_controls(thp7312);
> +	if (ret)
> +		goto power_off;
> +
> +	thp7312->sd.ctrl_handler = &thp7312->ctrl_handler;
> +	thp7312->sd.state_lock = thp7312->ctrl_handler.lock;
> +
> +	ret = v4l2_subdev_init_finalize(&thp7312->sd);
> +	if (ret < 0) {
> +		dev_err(dev, "Subdev active state initialization failed\n");
> +		goto free_ctrls;
> +	}
> +
> +	ret = v4l2_async_register_subdev(&thp7312->sd);
> +	if (ret < 0) {
> +		dev_err(dev, "Subdev registration failed\n");
> +		goto subdev_cleanup;
> +	}
> +
> +	pm_runtime_set_active(dev);
> +	pm_runtime_enable(dev);
> +
> +	dev_info(dev, "THP7312 firmware version %02u.%02u\n",
> +		 thp7312->fw_major_version, thp7312->fw_minor_version);
> +
> +	return 0;
> +
> +subdev_cleanup:
> +	v4l2_subdev_cleanup(&thp7312->sd);
> +free_ctrls:
> +	v4l2_ctrl_handler_free(&thp7312->ctrl_handler);
> +power_off:
> +	thp7312_power_off(thp7312);
> +entity_cleanup:
> +	media_entity_cleanup(&thp7312->sd.entity);
> +	return ret;
> +}
> +
> +static void thp7312_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> +
> +	if (thp7312->boot_mode == THP7312_BOOT_MODE_2WIRE_SLAVE) {
> +		firmware_upload_unregister(thp7312->fwl);
> +		return;
> +	}
> +
> +	pm_runtime_disable(&client->dev);
> +	v4l2_subdev_cleanup(&thp7312->sd);
> +	thp7312_remove_sensors(thp7312);
> +	v4l2_async_unregister_subdev(&thp7312->sd);
> +	v4l2_ctrl_handler_free(&thp7312->ctrl_handler);
> +	media_entity_cleanup(&thp7312->sd.entity);
> +	v4l2_device_unregister_subdev(sd);
> +}
> +
> +static const struct of_device_id thp7312_dt_ids[] = {
> +	{ .compatible = "thine,thp7312" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, thp7312_dt_ids);
> +
> +static struct i2c_driver thp7312_i2c_driver = {
> +	.driver = {
> +		.name  = "thp7312",
> +		.pm = &thp7312_pm_ops,
> +		.of_match_table	= thp7312_dt_ids,
> +	},
> +	.probe = thp7312_probe,
> +	.remove = thp7312_remove,
> +};
> +
> +module_i2c_driver(thp7312_i2c_driver);
> +
> +MODULE_DESCRIPTION("THP7312 MIPI Camera Subdev Driver");
> +MODULE_LICENSE("GPL");
Laurent Pinchart Oct. 27, 2023, 12:45 p.m. UTC | #2
Hi Sakari,

On Fri, Oct 27, 2023 at 12:30:37PM +0000, Sakari Ailus wrote:
> On Tue, Oct 17, 2023 at 04:21:03PM +0300, Laurent Pinchart wrote:
> > From: Paul Elder <paul.elder@ideasonboard.com>
> > 
> > The THP7312 is an external camera ISP from THine. Add a V4L2 subdev
> > driver for it.
> > 
> > Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> > Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> > Changes since v3:
> > 
> > - Move thp7312_get_regulators() to probe section
> > - Turn firmware update handlers static
> > - Wire up power management in struct driver
> > - Remove unnecessary double underscore function prefixes
> > - Configure CSI-2 lanes at stream on time
> > - Clean up naming of power management functions
> > 
> > Changes since v2:
> > 
> > - Make boot-mode property optional
> > - Fix dev_err_probe() usage in DT parsing
> > - Additional dev_err_probe() usage
> > - Use %u instead of %d for unsigned values
> > - Don't split lines unnecessarily
> > - Fix error handling in firmware upload initialization
> > - Use CCI helpers in firmware update code
> > - Fix runtime PM usage count
> > ---
> >  MAINTAINERS                 |    1 +
> >  drivers/media/i2c/Kconfig   |   16 +
> >  drivers/media/i2c/Makefile  |    1 +
> >  drivers/media/i2c/thp7312.c | 2339 +++++++++++++++++++++++++++++++++++
> >  4 files changed, 2357 insertions(+)
> >  create mode 100644 drivers/media/i2c/thp7312.c
> > 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index d2c15c0b22c7..1ba2e15111d6 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -21455,6 +21455,7 @@ S:	Maintained
> >  T:	git git://linuxtv.org/media_tree.git
> >  F:	Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
> >  F:	Documentation/userspace-api/media/drivers/thp7312.rst
> > +F:	drivers/media/i2c/thp7312.c
> >  F:	include/uapi/linux/thp7312.h
> >  
> >  THUNDERBOLT DMA TRAFFIC TEST DRIVER
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index 59ee0ca2c978..aa659bea91b3 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -628,6 +628,22 @@ source "drivers/media/i2c/et8ek8/Kconfig"
> >  
> >  endif
> >  
> > +menu "Camera ISPs"
> > +	visible if MEDIA_CAMERA_SUPPORT
> > +
> > +config VIDEO_THP7312
> > +	tristate "THine THP7312 support"
> > +	depends on I2C
> > +	select MEDIA_CONTROLLER
> > +	select V4L2_CCI_I2C
> > +	select V4L2_FWNODE
> > +	select VIDEO_V4L2_SUBDEV_API
> > +	help
> > +	  This is a Video4Linux2 sensor-level driver for the THine
> > +	  THP7312 ISP.
> > +
> > +endmenu
> > +
> >  menu "Lens drivers"
> >  	visible if MEDIA_CAMERA_SUPPORT
> >  
> > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > index f5010f80a21f..5e67217ede45 100644
> > --- a/drivers/media/i2c/Makefile
> > +++ b/drivers/media/i2c/Makefile
> > @@ -128,6 +128,7 @@ obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
> >  obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
> >  obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o
> >  obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o
> > +obj-$(CONFIG_VIDEO_THP7312) += thp7312.o
> >  obj-$(CONFIG_VIDEO_THS7303) += ths7303.o
> >  obj-$(CONFIG_VIDEO_THS8200) += ths8200.o
> >  obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o
> > diff --git a/drivers/media/i2c/thp7312.c b/drivers/media/i2c/thp7312.c
> > new file mode 100644
> > index 000000000000..7d3de929079d
> > --- /dev/null
> > +++ b/drivers/media/i2c/thp7312.c
> > @@ -0,0 +1,2339 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (C) 2021 THine Electronics, Inc.
> > + * Copyright (C) 2023 Ideas on Board Oy
> > + */
> > +
> > +#include <asm/unaligned.h>
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/firmware.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/init.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mtd/spi-nor.h>
> > +#include <linux/of_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/slab.h>
> > +#include <linux/thp7312.h>
> 
> uapi/linux/thp7321.h ?

Is that needed ?

> > +#include <linux/types.h>
> > +
> > +#include <media/v4l2-async.h>
> > +#include <media/v4l2-cci.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-subdev.h>
> > +
> > +/* ISP registers */
> > +
> > +#define	THP7312_REG_FIRMWARE_VERSION_1			CCI_REG8(0xf000)
> > +#define THP7312_REG_CAMERA_STATUS			CCI_REG8(0xf001)
> > +#define	THP7312_REG_FIRMWARE_VERSION_2			CCI_REG8(0xf005)
> > +#define THP7312_REG_SET_OUTPUT_ENABLE			CCI_REG8(0xf008)
> > +#define	THP7312_OUTPUT_ENABLE				0x01
> > +#define	THP7312_OUTPUT_DISABLE				0x00
> 
> Some lines habe tabs above after #define. Use space instead? Same for some
> lines below.

Indeed, I've just noticed now. Will fix.

> Register bit definitions may be useful to align differently though.
> 
> > +#define THP7312_REG_SET_OUTPUT_COLOR_COMPRESSION	CCI_REG8(0xf009)
> > +#define THP7312_REG_SET_OUTPUT_COLOR_UYVY		0x00
> > +#define THP7312_REG_SET_OUTPUT_COLOR_YUY2		0x04
> > +#define	THP7312_REG_FLIP_MIRROR				CCI_REG8(0xf00c)
> > +#define THP7312_REG_VIDEO_IMAGE_SIZE			CCI_REG8(0xf00d)
> > +#define THP7312_VIDEO_IMAGE_SIZE_640x360		0x52
> > +#define THP7312_VIDEO_IMAGE_SIZE_640x460		0x03
> > +#define THP7312_VIDEO_IMAGE_SIZE_1280x720		0x0a
> > +#define THP7312_VIDEO_IMAGE_SIZE_1920x1080		0x0b
> > +#define THP7312_VIDEO_IMAGE_SIZE_3840x2160		0x0d
> > +#define THP7312_VIDEO_IMAGE_SIZE_4160x3120		0x14
> > +#define THP7312_VIDEO_IMAGE_SIZE_2016x1512		0x20
> > +#define THP7312_VIDEO_IMAGE_SIZE_2048x1536		0x21
> > +#define THP7312_REG_VIDEO_FRAME_RATE_MODE		CCI_REG8(0xf00f)
> > +#define THP7312_VIDEO_FRAME_RATE_MODE1			0x80
> > +#define THP7312_VIDEO_FRAME_RATE_MODE2			0x81
> > +#define THP7312_VIDEO_FRAME_RATE_MODE3			0x82
> > +#define THP7312_REG_SET_DRIVING_MODE			CCI_REG8(0xf010)
> > +#define THP7312_REG_DRIVING_MODE_STATUS			CCI_REG8(0xf011)
> > +#define THP7312_REG_JPEG_COMPRESSION_FACTOR		CCI_REG8(0xf01b)
> > +#define THP7312_REG_AE_EXPOSURE_COMPENSATION		CCI_REG8(0xf022)
> > +#define THP7312_REG_AE_FLICKER_MODE			CCI_REG8(0xf023)
> > +#define THP7312_AE_FLICKER_MODE_50			0x00
> > +#define THP7312_AE_FLICKER_MODE_60			0x01
> > +#define THP7312_AE_FLICKER_MODE_DISABLE			0x80
> > +#define THP7312_REG_AE_FIX_FRAME_RATE			CCI_REG8(0xf02e)
> > +#define THP7312_REG_MANUAL_WB_RED_GAIN			CCI_REG8(0xf036)
> > +#define THP7312_REG_MANUAL_WB_BLUE_GAIN			CCI_REG8(0xf037)
> > +#define THP7312_REG_WB_MODE				CCI_REG8(0xf039)
> > +#define THP7312_WB_MODE_AUTO				0x00
> > +#define THP7312_WB_MODE_MANUAL				0x11
> > +#define	THP7312_REG_MANUAL_FOCUS_POSITION		CCI_REG16(0xf03c)
> > +#define	THP7312_REG_AF_CONTROL				CCI_REG8(0xf040)
> > +#define	THP7312_REG_AF_CONTROL_AF			0x01
> > +#define	THP7312_REG_AF_CONTROL_MANUAL			0x10
> > +#define	THP7312_REG_AF_CONTROL_LOCK			0x80
> > +#define THP7312_REG_AF_SETTING				CCI_REG8(0xf041)
> > +/*
> > + * TODO: Bits 4 and 5 seems to select between oneshot and continuous mode, and
> > + * bits 6 and 7 to select the focus method. The value for continuous hybrid mode
> > + * is an outlier, verify that it is correct.
> > + */
> > +#define THP7312_REG_AF_SETTING_ONESHOT_CONTRAST		0x00
> > +#define THP7312_REG_AF_SETTING_ONESHOT_PDAF		0x40
> > +#define THP7312_REG_AF_SETTING_ONESHOT_HYBRID		0x80
> > +#define THP7312_REG_AF_SETTING_CONTINUOUS_CONTRAST	0x30
> > +#define THP7312_REG_AF_SETTING_CONTINUOUS_PDAF		0x70
> > +#define THP7312_REG_AF_SETTING_CONTINUOUS_HYBRID	0xf0
> > +#define THP7312_REG_SATURATION				CCI_REG8(0xf052)
> > +#define THP7312_REG_SHARPNESS				CCI_REG8(0xf053)
> > +#define THP7312_REG_BRIGHTNESS				CCI_REG8(0xf056)
> > +#define THP7312_REG_CONTRAST				CCI_REG8(0xf057)
> > +#define THP7312_REG_NOISE_REDUCTION			CCI_REG8(0xf059)
> > +
> > +#define TH7312_REG_CUSTOM_MIPI_SET			CCI_REG8(0xf0f6)
> > +#define TH7312_REG_CUSTOM_MIPI_STATUS			CCI_REG8(0xf0f7)
> > +#define TH7312_REG_CUSTOM_MIPI_RD			CCI_REG8(0xf0f8)
> > +#define TH7312_REG_CUSTOM_MIPI_TD			CCI_REG8(0xf0f9)
> > +
> > +/*
> > + * Firmware update registers. Those use a different address space than the
> > + * normal operation ISP registers.
> > + */
> > +
> > +#define THP7312_REG_FW_DRIVABILITY			CCI_REG32(0xd65c)
> > +#define THP7312_REG_FW_DEST_BANK_ADDR			CCI_REG32(0xff08)
> > +#define THP7312_REG_FW_VERIFY_RESULT			CCI_REG8(0xff60)
> > +#define THP7312_REG_FW_RESET_FLASH			CCI_REG8(0xff61)
> > +#define THP7312_REG_FW_MEMORY_IO_SETTING		CCI_REG8(0xff62)
> > +#define THP7312_FW_MEMORY_IO_GPIO0			1
> > +#define THP7312_FW_MEMORY_IO_GPIO1			0
> > +#define THP7312_REG_FW_CRC_RESULT			CCI_REG32(0xff64)
> > +#define THP7312_REG_FW_STATUS				CCI_REG8(0xfffc)
> > +
> > +enum thp7312_focus_method {
> > +	THP7312_FOCUS_METHOD_CONTRAST,
> > +	THP7312_FOCUS_METHOD_PDAF,
> > +	THP7312_FOCUS_METHOD_HYBRID,
> > +};
> > +
> > +/*
> > + * enum thp7312_focus_state - State of the focus handler
> > + *
> > + * @THP7312_FOCUS_STATE_MANUAL: Manual focus, controlled through the
> > + *	V4L2_CID_FOCUS_ABSOLUTE control
> > + * @THP7312_FOCUS_STATE_AUTO: Continuous auto-focus
> > + * @THP7312_FOCUS_STATE_LOCKED: Lock the focus to a fixed position. This state
> > + *	is entered when switching from auto to manual mode.
> > + * @THP7312_FOCUS_STATE_ONESHOT: One-shot auto-focus
> > + *
> > + * Valid transitions are as follow:
> > + *
> > + * digraph fsm {
> > + *         node [shape=circle];
> > + *
> > + *         manual [label="MANUAL"];
> > + *         auto [label="AUTO"];
> > + *         locked [label="LOCKED"];
> > + *         oneshot [label="ONESHOT"];
> > + *
> > + *         manual -> auto [label="FOCUS_AUTO <- true"]
> > + *         locked -> auto [label="FOCUS_AUTO <- true"]
> > + *         oneshot -> auto [label="FOCUS_AUTO <- true"]
> > + *         auto -> locked [label="FOCUS_AUTO <- false"]
> > + *
> > + *         locked -> manual [label="FOCUS_ABSOLUTE <- *"]
> > + *         oneshot -> manual [label="FOCUS_ABSOLUTE <- *"]
> > + *
> > + *         manual -> oneshot [label="FOCUS_START <- *"]
> > + *         locked -> oneshot [label="FOCUS_START <- *"]
> > + * }
> > + */
> > +enum thp7312_focus_state {
> > +	THP7312_FOCUS_STATE_MANUAL,
> > +	THP7312_FOCUS_STATE_AUTO,
> > +	THP7312_FOCUS_STATE_LOCKED,
> > +	THP7312_FOCUS_STATE_ONESHOT,
> > +};
> > +
> > +enum thp7312_boot_mode {
> > +	THP7312_BOOT_MODE_2WIRE_SLAVE = 0,
> > +	THP7312_BOOT_MODE_SPI_MASTER = 1,
> > +};
> > +
> > +struct thp7312_frame_rate {
> > +	u32 fps;
> > +	u32 pixel_rate;
> > +	u8 reg_frame_rate_mode;
> > +};
> > +
> > +struct thp7312_mode_info {
> > +	u32 width;
> > +	u32 height;
> > +	u8 reg_image_size;
> > +	const struct thp7312_frame_rate *rates;
> > +};
> > +
> > +static const u32 thp7312_colour_fmts[] = {
> > +	MEDIA_BUS_FMT_YUYV8_1X16,
> > +};
> > +
> > +/* regulator supplies */
> > +static const char * const thp7312_supply_name[] = {
> > +	"vddcore",
> > +	"vhtermrx",
> > +	"vddtx",
> > +	"vddhost",
> > +	"vddcmos",
> > +	"vddgpio-0",
> > +	"vddgpio-1",
> > +};
> > +
> > +#define THP7312_NUM_SUPPLIES ARRAY_SIZE(thp7312_supply_name)
> 
> Plain use of ARRAY_SIZE() would be nice.

That's what I usually ask for too :-) I'll give it a try here.

> > +
> > +static const struct thp7312_mode_info thp7312_mode_info_data[] = {
> > +	{
> > +		.width = 1920,
> > +		.height = 1080,
> > +		.reg_image_size = THP7312_VIDEO_IMAGE_SIZE_1920x1080,
> > +		.rates = (const struct thp7312_frame_rate[]) {
> > +			{ 30, 150000000, 0x81 },
> > +			{ 60, 193750000, 0x82 },
> > +			{ 0 }
> > +		},
> > +	}, {
> > +		.width = 2048,
> > +		.height = 1536,
> > +		.reg_image_size = THP7312_VIDEO_IMAGE_SIZE_2048x1536,
> > +		.rates = (const struct thp7312_frame_rate[]) {
> > +			{ 30, 150000000, 0x81 },
> > +			{ 0 }
> > +		}
> > +	}, {
> > +		.width = 3840,
> > +		.height = 2160,
> > +		.reg_image_size = THP7312_VIDEO_IMAGE_SIZE_3840x2160,
> > +		.rates = (const struct thp7312_frame_rate[]) {
> > +			{ 30, 300000000, 0x81 },
> > +			{ 0 }
> > +		},
> > +	}, {
> > +		.width = 4160,
> > +		.height = 3120,
> > +		.reg_image_size = THP7312_VIDEO_IMAGE_SIZE_4160x3120,
> > +		.rates = (const struct thp7312_frame_rate[]) {
> > +			{ 20, 300000000, 0x81 },
> > +			{ 0 }
> > +		},
> > +	},
> > +};
> > +
> > +#define THP7312_NUM_MODES ARRAY_SIZE(thp7312_mode_info_data)
> 
> Same here.
> 
> > +
> > +struct thp7312_device;
> > +
> > +struct thp7312_sensor_supply {
> > +	const char *name;
> > +	unsigned int post_delay_us;
> > +};
> > +
> > +struct thp7312_sensor_info {
> > +	const char *model;
> > +	const char *name;
> > +	unsigned int i2c_addr;
> > +	const struct thp7312_sensor_supply *supplies;
> > +};
> > +
> > +struct thp7312_sensor {
> > +	struct thp7312_device *thp7312;
> > +	unsigned int index;
> > +	u8 data_lanes[4];
> > +
> > +	struct device_node *of_node;
> > +	struct device *dev;
> > +	unsigned int num_supplies;
> > +	struct regulator_bulk_data *supplies;
> > +};
> > +
> > +struct thp7312_device {
> > +	struct device *dev;
> > +	struct regmap *regmap;
> > +
> > +	struct v4l2_subdev sd;
> > +	struct media_pad pad;
> > +
> > +	/* DT endpoint info */
> > +	struct v4l2_fwnode_endpoint ep;
> > +	struct gpio_desc *reset_gpio;
> > +	struct regulator_bulk_data supplies[THP7312_NUM_SUPPLIES];
> > +	struct clk *iclk;
> > +
> > +	const struct thp7312_sensor_info *sensor_info;
> > +	struct thp7312_sensor sensors[1];
> > +
> > +	enum thp7312_boot_mode boot_mode;
> > +
> > +	struct v4l2_ctrl_handler ctrl_handler;
> > +
> > +	/* These are protected by v4l2 active state */
> > +	const struct thp7312_mode_info *current_mode;
> > +	const struct thp7312_frame_rate *current_rate;
> > +
> > +	struct {
> > +		struct v4l2_ctrl *focus_auto;
> > +		struct v4l2_ctrl *focus_absolute;
> > +		struct v4l2_ctrl *focus_start;
> > +		struct v4l2_ctrl *focus_method;
> > +	};
> > +
> > +	enum thp7312_focus_state focus_state;
> > +
> > +	struct {
> > +		struct v4l2_ctrl *noise_reduction_auto;
> > +		struct v4l2_ctrl *noise_reduction_absolute;
> > +	};
> > +
> > +	const char *fw_name;
> > +	u8 *fw_data;
> > +	size_t fw_size;
> > +
> > +	u8 fw_major_version;
> > +	u8 fw_minor_version;
> > +
> > +	/* Lock to protect fw_cancel */
> > +	struct mutex fw_lock;
> > +	struct fw_upload *fwl;
> > +	bool fw_cancel;
> 
> Arranging this right after fw_* would save some memory.

After what ? I assume you mean fw_*_version ? It would, but it would
feel a bit out of place. I'll see what I can do.

> > +	u8 *fw_write_buf;
> > +};
> > +
> > +static const struct thp7312_sensor_info thp7312_sensor_info[] = {
> > +	{
> > +		.model = "sony,imx258",
> > +		.name = "imx258",
> > +		.i2c_addr = 0x0,
> > +		.supplies = (const struct thp7312_sensor_supply[]) {
> > +			{ "dovdd", 0 },
> > +			{ "avdd", 0 },
> > +			{ "dvdd", 0 },
> > +			{ NULL, 0 },
> > +		},
> > +	},
> > +};
> > +
> > +static inline struct thp7312_device *to_thp7312_dev(struct v4l2_subdev *sd)
> > +{
> > +	return container_of(sd, struct thp7312_device, sd);
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Device Access & Configuration
> > + */
> > +
> > +#define thp7312_read_poll_timeout(dev, addr, val, cond, sleep_us, timeout_us) \
> > +({ \
> > +	int __ret, __err; \
> > +	__ret = read_poll_timeout(cci_read, __err, __err || (cond), sleep_us, \
> > +				  timeout_us, false, (dev)->regmap, addr, \
> > +				  &(val), NULL); \
> > +	__ret ? : __err; \
> > +})
> > +
> > +static int thp7312_set_mipi_regs(struct thp7312_device *thp7312, u32 reg,
> > +				 u8 *lanes, u8 num_lanes)
> > +{
> > +	u8 used_lanes = 0;
> > +	u8 conv_lanes[4];
> > +	u8 val;
> > +	unsigned int i;
> > +
> > +	/*
> > +	 * The value that we write to the register is the index in the
> > +	 * data-lanes array, so we need to do a conversion. Do this in the same
> > +	 * pass as validating data-lanes.
> > +	 */
> > +	for (i = 0; i < num_lanes; i++) {
> > +		if (lanes[i] > 4)
> > +			return -EINVAL;
> > +
> > +		if (used_lanes & (1 << lanes[i]))
> 
> 				  1u

Or BIT(lanes[i])

> 
> > +			return -EINVAL;
> > +
> > +		used_lanes |= 1 << lanes[i];
> > +
> > +		/*
> > +		 * data-lanes is 1-indexed while we'll use 0-indexing for
> > +		 * writing the register.
> > +		 */
> > +		conv_lanes[lanes[i] - 1] = i;
> > +	}
> > +
> > +	val = ((conv_lanes[3] & 0x03) << 6) |
> > +	      ((conv_lanes[2] & 0x03) << 4) |
> > +	      ((conv_lanes[1] & 0x03) << 2) |
> > +	       (conv_lanes[0] & 0x03);
> 
> You could construct val in the loop and drop conv_lanes altogether.
> 
> I.e.
> 
> 		val |= (i & 0x03) << ((lanes[i] - 1) * 2);
> 
> And assign val to 0 in declaration.

I think I'll compute it at probe time and cache it instead.

> > +
> > +	return cci_write(thp7312->regmap, reg, val, NULL);
> > +}
> > +
> > +static int thp7312_set_mipi_lanes(struct thp7312_device *thp7312)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	int ret;
> > +	u64 val;
> > +
> > +	ret = thp7312_set_mipi_regs(thp7312, TH7312_REG_CUSTOM_MIPI_RD,
> > +				    thp7312->sensors[0].data_lanes,
> > +				    ARRAY_SIZE(thp7312->sensors[0].data_lanes));
> > +	if (ret < 0) {
> > +		dev_err(dev, "Failed to set RD MIPI lanes: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret  = thp7312_set_mipi_regs(thp7312, TH7312_REG_CUSTOM_MIPI_TD,
> > +				     thp7312->ep.bus.mipi_csi2.data_lanes,
> > +				     thp7312->ep.bus.mipi_csi2.num_data_lanes);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = cci_write(thp7312->regmap, TH7312_REG_CUSTOM_MIPI_SET, 1, NULL);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = thp7312_read_poll_timeout(thp7312, TH7312_REG_CUSTOM_MIPI_STATUS,
> > +					val, val == 0x00, 100000, 2000000);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to poll MIPI lane status: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int thp7312_change_mode(struct thp7312_device *thp7312,
> > +			       const struct thp7312_mode_info *mode,
> > +			       const struct thp7312_frame_rate *rate)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	u64 val = 0;
> > +	int ret;
> > +
> > +	ret = thp7312_read_poll_timeout(thp7312, THP7312_REG_CAMERA_STATUS, val,
> > +					val == 0x80, 20000, 200000);
> > +	if (ret < 0) {
> > +		dev_err(dev, "%s(): failed to poll ISP: %d\n", __func__, ret);
> > +		return ret;
> > +	}
> > +
> > +	cci_write(thp7312->regmap, THP7312_REG_VIDEO_IMAGE_SIZE,
> > +		  mode->reg_image_size, &ret);
> > +	cci_write(thp7312->regmap, THP7312_REG_VIDEO_FRAME_RATE_MODE,
> > +		  rate->reg_frame_rate_mode, &ret);
> > +	cci_write(thp7312->regmap, THP7312_REG_JPEG_COMPRESSION_FACTOR, 0x5e,
> > +		  &ret);
> > +	cci_write(thp7312->regmap, THP7312_REG_SET_DRIVING_MODE, 0x01, &ret);
> > +
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = thp7312_read_poll_timeout(thp7312, THP7312_REG_DRIVING_MODE_STATUS,
> > +					val, val == 0x01, 20000, 100000);
> > +	if (ret < 0) {
> > +		dev_err(dev, "%s(): failed\n", __func__);
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int thp7312_set_framefmt(struct thp7312_device *thp7312,
> > +				struct v4l2_mbus_framefmt *format)
> > +{
> > +	u8 val;
> > +
> > +	switch (format->code) {
> > +	case MEDIA_BUS_FMT_UYVY8_1X16:
> > +		/* YUV422, UYVY */
> > +		val = THP7312_REG_SET_OUTPUT_COLOR_UYVY;
> > +		break;
> > +	case MEDIA_BUS_FMT_YUYV8_1X16:
> > +		/* YUV422, YUYV */
> > +		val = THP7312_REG_SET_OUTPUT_COLOR_YUY2;
> > +		break;
> > +	default:
> > +		/* Should never happen */
> > +		return -EINVAL;
> > +	}
> > +
> > +	return cci_write(thp7312->regmap,
> > +			 THP7312_REG_SET_OUTPUT_COLOR_COMPRESSION, val, NULL);
> > +}
> > +
> > +static int thp7312_init_mode(struct thp7312_device *thp7312,
> > +			     struct v4l2_subdev_state *sd_state)
> > +{
> > +	struct v4l2_mbus_framefmt *fmt;
> > +	int ret;
> > +
> > +	fmt = v4l2_subdev_get_pad_format(&thp7312->sd, sd_state, 0);
> > +
> > +	ret = thp7312_set_framefmt(thp7312, fmt);
> > +	if (ret)
> > +		return ret;
> > +
> > +	return thp7312_change_mode(thp7312, thp7312->current_mode,
> > +				   thp7312->current_rate);
> > +}
> > +
> > +static int thp7312_stream_enable(struct thp7312_device *thp7312, int enable)
> > +{
> > +	return cci_write(thp7312->regmap, THP7312_REG_SET_OUTPUT_ENABLE,
> > +			 enable ? THP7312_OUTPUT_ENABLE : THP7312_OUTPUT_DISABLE,
> > +			 NULL);
> > +}
> > +
> > +static int thp7312_check_status_stream_mode(struct thp7312_device *thp7312)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	u64 status = 0;
> > +	int ret;
> > +
> > +	while (status != 0x80) {
> > +		ret = cci_read(thp7312->regmap, THP7312_REG_CAMERA_STATUS,
> > +			       &status, NULL);
> > +		if (ret)
> > +			return ret;
> > +
> > +		if (status == 0x80) {
> > +			dev_dbg(dev, "Camera initialization done\n");
> > +			return 0;
> > +		}
> > +
> > +		if (status != 0x00) {
> > +			dev_err(dev, "Invalid camera status %llx\n", status);
> > +			return -EINVAL;
> > +		}
> > +
> > +		dev_dbg(dev, "Camera initializing...\n");
> > +		usleep_range(70000, 80000);
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static void thp7312_reset(struct thp7312_device *thp7312)
> > +{
> > +	gpiod_set_value_cansleep(thp7312->reset_gpio, 1);
> > +	/*
> > +	 * TODO: Shorten this delay to just above the minimum of 8 clock
> > +	 * cycles.
> > +	 */
> 
> Wouldn't it be trivial to calculate this, knowing the clock frequency?

I can give it a try.

> > +	fsleep(10000);
> > +
> > +	gpiod_set_value_cansleep(thp7312->reset_gpio, 0);
> > +	/*
> > +	 * TODO: The documentation states that the device needs 2ms to
> > +	 * initialize after reset is deasserted. It then proceeds to load the
> > +	 * firmware from the flash memory, which takes an unspecified amount of
> > +	 * time. Check if this delay could be reduced.
> > +	 */
> > +	fsleep(300000);
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Power Management
> > + */
> > +
> > +static void thp7312_power_off_sensors(struct thp7312_device *thp7312)
> > +{
> > +	unsigned int i;
> > +
> > +	if (!thp7312->sensor_info->supplies)
> > +		return;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(thp7312->sensors); ++i) {
> > +		struct thp7312_sensor *sensor = &thp7312->sensors[i];
> > +
> > +		regulator_bulk_disable(sensor->num_supplies, sensor->supplies);
> > +	}
> > +}
> > +
> > +static int thp7312_power_off(struct thp7312_device *thp7312)
> > +{
> > +	thp7312_power_off_sensors(thp7312);
> > +	regulator_bulk_disable(THP7312_NUM_SUPPLIES, thp7312->supplies);
> > +	clk_disable_unprepare(thp7312->iclk);
> > +
> > +	return 0;
> > +}
> > +
> > +static int thp7312_power_on_sensors(struct thp7312_device *thp7312)
> > +{
> > +	struct thp7312_sensor *sensor;
> > +	unsigned int i, j;
> > +	int ret;
> > +
> > +	if (!thp7312->sensor_info->supplies)
> > +		return 0;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(thp7312->sensors); ++i) {
> > +		sensor = &thp7312->sensors[i];
> > +		ret = 0;
> > +
> > +		for (j = 0; j < sensor->num_supplies; ++j) {
> > +			unsigned int delay;
> > +
> > +			/*
> > +			 * We can't use regulator_bulk_enable() as it would
> > +			 * enable all supplies in parallel, breaking the sensor
> > +			 * power sequencing constraints.
> > +			 */
> > +			ret = regulator_enable(sensor->supplies[j].consumer);
> > +			if (ret < 0) {
> > +				dev_err(thp7312->dev,
> > +					"Failed to enable supply %u for sensor %u\n",
> > +					j, i);
> > +				goto error;
> > +			}
> > +
> > +			delay = thp7312->sensor_info->supplies[j].post_delay_us;
> > +			usleep_range(delay, delay + 100);
> > +		}
> > +	}
> > +
> > +	return 0;
> > +
> > +error:
> > +	for (; j > 0; --j)
> > +		regulator_disable(sensor->supplies[j - 1].consumer);
> > +
> > +	for (; i > 0; --i) {
> > +		sensor = &thp7312->sensors[i - 1];
> > +		regulator_bulk_disable(sensor->num_supplies, sensor->supplies);
> > +	}
> > +
> > +	return ret;
> > +}
> > +
> > +static int __thp7312_power_on(struct thp7312_device *thp7312)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	int ret;
> > +
> > +	ret = regulator_bulk_enable(THP7312_NUM_SUPPLIES, thp7312->supplies);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = clk_prepare_enable(thp7312->iclk);
> > +	if (ret < 0) {
> > +		dev_err(dev, "clk prepare enable failed\n");
> > +		regulator_bulk_disable(THP7312_NUM_SUPPLIES, thp7312->supplies);
> > +		return ret;
> > +	}
> > +
> > +	/*
> > +	 * We cannot assume that turning off and on again will reset, so do a
> > +	 * software reset on power up.
> > +	 */
> > +	thp7312_reset(thp7312);
> > +
> > +	return 0;
> > +}
> > +
> > +static int thp7312_power_on(struct thp7312_device *thp7312)
> > +{
> > +	int ret;
> > +
> > +	ret = __thp7312_power_on(thp7312);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = thp7312_check_status_stream_mode(thp7312);
> > +	if (ret < 0)
> > +		goto error;
> > +
> > +	ret = thp7312_power_on_sensors(thp7312);
> > +	if (ret)
> > +		goto error;
> > +
> > +	return 0;
> > +
> > +error:
> > +	thp7312_power_off(thp7312);
> > +	return ret;
> > +}
> > +
> > +static int thp7312_pm_runtime_suspend(struct device *dev)
> > +{
> > +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> > +
> > +	return thp7312_power_off(thp7312);
> > +}
> > +
> > +static int thp7312_pm_runtime_resume(struct device *dev)
> > +{
> > +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> > +
> > +	return thp7312_power_on(thp7312);
> > +}
> > +
> > +static const struct dev_pm_ops thp7312_pm_ops = {
> > +	SET_RUNTIME_PM_OPS(thp7312_pm_runtime_suspend,
> > +			   thp7312_pm_runtime_resume, NULL)
> > +};
> > +
> > +/* -----------------------------------------------------------------------------
> > + * V4L2 Subdev Operations
> > + */
> > +
> > +static bool thp7312_find_bus_code(u32 code)
> > +{
> > +	unsigned int i;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(thp7312_colour_fmts); ++i) {
> > +		if (thp7312_colour_fmts[i] == code)
> > +			return true;
> > +	}
> > +
> > +	return false;
> > +}
> > +
> > +static const struct thp7312_mode_info *
> > +thp7312_find_mode(unsigned int width, unsigned int height, bool nearest)
> > +{
> > +	const struct thp7312_mode_info *mode;
> > +
> > +	mode = v4l2_find_nearest_size(thp7312_mode_info_data,
> > +				      ARRAY_SIZE(thp7312_mode_info_data),
> > +				      width, height, width, height);
> > +
> > +	if (!nearest && (mode->width != width || mode->height != height))
> > +		return NULL;
> > +
> > +	return mode;
> > +}
> > +
> > +static int thp7312_enum_mbus_code(struct v4l2_subdev *sd,
> > +				  struct v4l2_subdev_state *sd_state,
> > +				  struct v4l2_subdev_mbus_code_enum *code)
> > +{
> > +	if (code->index >= ARRAY_SIZE(thp7312_colour_fmts))
> > +		return -EINVAL;
> > +
> > +	code->code = thp7312_colour_fmts[code->index];
> > +
> > +	return 0;
> > +}
> > +
> > +static int thp7312_enum_frame_size(struct v4l2_subdev *sd,
> > +				   struct v4l2_subdev_state *sd_state,
> > +				   struct v4l2_subdev_frame_size_enum *fse)
> > +{
> > +	if (!thp7312_find_bus_code(fse->code))
> > +		return -EINVAL;
> > +
> > +	if (fse->index >= THP7312_NUM_MODES)
> > +		return -EINVAL;
> > +
> > +	fse->min_width = thp7312_mode_info_data[fse->index].width;
> > +	fse->max_width = fse->min_width;
> > +	fse->min_height = thp7312_mode_info_data[fse->index].height;
> > +	fse->max_height = fse->min_height;
> > +
> > +	return 0;
> > +}
> > +
> > +static int thp7312_enum_frame_interval(struct v4l2_subdev *sd,
> > +				       struct v4l2_subdev_state *sd_state,
> > +				       struct v4l2_subdev_frame_interval_enum *fie)
> > +{
> > +	const struct thp7312_frame_rate *rate;
> > +	const struct thp7312_mode_info *mode;
> > +	unsigned int index = fie->index;
> > +
> > +	if (!thp7312_find_bus_code(fie->code))
> > +		return -EINVAL;
> > +
> > +	mode = thp7312_find_mode(fie->width, fie->height, false);
> > +	if (!mode)
> > +		return -EINVAL;
> > +
> > +	for (rate = mode->rates; rate->fps; ++rate, --index) {
> > +		if (!index) {
> > +			fie->interval.numerator = 1;
> > +			fie->interval.denominator = rate->fps;
> 
> Maybe a newline here?

If that makes you happy :-)

> > +			return 0;
> > +		}
> > +	}
> > +
> > +	return -EINVAL;
> > +}
> > +
> > +static int thp7312_set_fmt(struct v4l2_subdev *sd,
> > +			   struct v4l2_subdev_state *sd_state,
> > +			   struct v4l2_subdev_format *format)
> > +{
> > +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> > +	struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
> > +	struct v4l2_mbus_framefmt *fmt;
> > +	const struct thp7312_mode_info *mode;
> > +
> > +	if (!thp7312_find_bus_code(mbus_fmt->code))
> > +		mbus_fmt->code = thp7312_colour_fmts[0];
> > +
> > +	mode = thp7312_find_mode(mbus_fmt->width, mbus_fmt->height, true);
> > +
> > +	fmt = v4l2_subdev_get_pad_format(&thp7312->sd, sd_state, 0);
> > +
> > +	fmt->code = mbus_fmt->code;
> > +	fmt->width = mode->width;
> > +	fmt->height = mode->height;
> > +	fmt->colorspace = V4L2_COLORSPACE_SRGB;
> > +	fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
> > +	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
> > +	fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
> > +
> > +	*mbus_fmt = *fmt;
> > +
> > +	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> > +		thp7312->current_mode = mode;
> > +		thp7312->current_rate = &mode->rates[0];
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int thp7312_g_frame_interval(struct v4l2_subdev *sd,
> > +				    struct v4l2_subdev_frame_interval *fi)
> > +{
> > +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> > +	struct v4l2_subdev_state *sd_state;
> > +
> > +	sd_state = v4l2_subdev_lock_and_get_active_state(sd);
> > +	fi->interval.numerator = 1;
> > +	fi->interval.denominator = thp7312->current_rate->fps;
> > +	v4l2_subdev_unlock_state(sd_state);
> > +
> > +	return 0;
> > +}
> > +
> > +static int thp7312_s_frame_interval(struct v4l2_subdev *sd,
> > +				    struct v4l2_subdev_frame_interval *fi)
> > +{
> > +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> > +	const struct thp7312_mode_info *mode;
> > +	const struct thp7312_frame_rate *best_rate = NULL;
> > +	const struct thp7312_frame_rate *rate;
> > +	struct v4l2_subdev_state *sd_state;
> > +	unsigned int best_delta = UINT_MAX;
> > +	unsigned int fps;
> > +
> > +	/* Avoid divisions by 0, pick the highest frame if the interval is 0. */
> > +	fps = fi->interval.numerator
> > +	    ? DIV_ROUND_CLOSEST(fi->interval.denominator, fi->interval.numerator)
> > +	    : UINT_MAX;
> > +
> > +	sd_state = v4l2_subdev_lock_and_get_active_state(sd);
> > +
> > +	mode = thp7312->current_mode;
> > +
> > +	for (rate = mode->rates; rate->fps && best_delta; ++rate) {
> > +		unsigned int delta = abs(rate->fps - fps);
> > +
> > +		if (delta <= best_delta) {
> > +			best_delta = delta;
> > +			best_rate = rate;
> > +		}
> > +	}
> > +
> > +	thp7312->current_rate = best_rate;
> > +
> > +	v4l2_subdev_unlock_state(sd_state);
> > +
> > +	fi->interval.numerator = 1;
> > +	fi->interval.denominator = best_rate->fps;
> > +
> > +	return 0;
> > +}
> > +
> > +static int thp7312_s_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> > +	struct v4l2_subdev_state *sd_state;
> > +	int ret;
> > +
> > +	sd_state = v4l2_subdev_lock_and_get_active_state(sd);
> > +
> > +	if (!enable) {
> > +		thp7312_stream_enable(thp7312, enable);
> 
> I'd use:
> 
> 					       0);
> 
> as enable is known to be 0 here.

Agreed.

> > +		pm_runtime_put(thp7312->dev);
> > +		v4l2_subdev_unlock_state(sd_state);
> 
> Newline here?
> 
> > +		return 0;
> > +	}
> > +
> > +	ret = pm_runtime_resume_and_get(thp7312->dev);
> > +	if (ret)
> > +		goto finish_unlock;
> > +
> > +	ret = thp7312_set_mipi_lanes(thp7312);
> > +	if (ret)
> > +		goto finish_pm;
> > +
> > +	ret = thp7312_init_mode(thp7312, sd_state);
> > +	if (ret)
> > +		goto finish_pm;
> > +
> > +	ret = __v4l2_ctrl_handler_setup(&thp7312->ctrl_handler);
> > +	if (ret)
> > +		goto finish_pm;
> > +
> > +	ret = thp7312_stream_enable(thp7312, enable);
> > +	if (ret)
> > +		goto finish_pm;
> > +
> > +	goto finish_unlock;
> > +
> > +finish_pm:
> > +	pm_runtime_put(thp7312->dev);
> > +finish_unlock:
> > +	v4l2_subdev_unlock_state(sd_state);
> > +
> > +	return ret;
> > +}
> > +
> > +static int thp7312_init_cfg(struct v4l2_subdev *sd,
> > +			    struct v4l2_subdev_state *sd_state)
> > +{
> > +	const struct thp7312_mode_info *default_mode = &thp7312_mode_info_data[0];
> > +	struct v4l2_mbus_framefmt *fmt;
> > +
> > +	fmt = v4l2_subdev_get_pad_format(sd, sd_state, 0);
> > +
> > +	/*
> > +	 * default init sequence initialize thp7312 to
> > +	 * YUV422 YUYV VGA@30fps
> > +	 */
> > +	fmt->code = MEDIA_BUS_FMT_YUYV8_1X16;
> > +	fmt->colorspace = V4L2_COLORSPACE_SRGB;
> > +	fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
> > +	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
> > +	fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
> > +	fmt->width = default_mode->width;
> > +	fmt->height = default_mode->height;
> > +	fmt->field = V4L2_FIELD_NONE;
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct v4l2_subdev_core_ops thp7312_core_ops = {
> > +	.log_status = v4l2_ctrl_subdev_log_status,
> > +	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> > +	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
> > +};
> > +
> > +static const struct v4l2_subdev_video_ops thp7312_video_ops = {
> > +	.g_frame_interval = thp7312_g_frame_interval,
> > +	.s_frame_interval = thp7312_s_frame_interval,
> > +	.s_stream = thp7312_s_stream,
> > +};
> > +
> > +static const struct v4l2_subdev_pad_ops thp7312_pad_ops = {
> > +	.enum_mbus_code = thp7312_enum_mbus_code,
> > +	.init_cfg = thp7312_init_cfg,
> > +	.get_fmt = v4l2_subdev_get_fmt,
> > +	.set_fmt = thp7312_set_fmt,
> > +	.enum_frame_size = thp7312_enum_frame_size,
> > +	.enum_frame_interval = thp7312_enum_frame_interval,
> > +};
> > +
> > +static const struct v4l2_subdev_ops thp7312_subdev_ops = {
> > +	.core = &thp7312_core_ops,
> > +	.video = &thp7312_video_ops,
> > +	.pad = &thp7312_pad_ops,
> > +};
> > +
> > +/* -----------------------------------------------------------------------------
> > + * V4L2 Control Operations
> > + */
> > +
> > +static inline struct thp7312_device *to_thp7312_from_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > +	return container_of(ctrl->handler, struct thp7312_device, ctrl_handler);
> > +}
> > +
> > +/* 0: 3000cm, 18: 8cm */
> > +static const u16 thp7312_focus_values[] = {
> > +	3000, 1000, 600, 450, 350,
> > +	290,  240,  200, 170, 150,
> > +	140,  130,  120, 110, 100,
> > +	93,   87,   83,  80,
> > +};
> > +
> > +static int thp7312_set_focus(struct thp7312_device *thp7312)
> > +{
> > +	enum thp7312_focus_state new_state;
> > +	bool continuous;
> > +	u8 af_control;
> > +	u8 af_setting;
> > +	int ret = 0;
> > +
> > +	/* Start by programming the manual focus position if it has changed. */
> > +	if (thp7312->focus_absolute->is_new) {
> > +		unsigned int value;
> > +
> > +		value = thp7312_focus_values[thp7312->focus_absolute->val];
> > +
> > +		ret = cci_write(thp7312->regmap,
> > +				THP7312_REG_MANUAL_FOCUS_POSITION, value, NULL);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> > +	/* Calculate the new focus state. */
> > +	switch (thp7312->focus_state) {
> > +	case THP7312_FOCUS_STATE_MANUAL:
> > +	default:
> > +		if (thp7312->focus_auto->val)
> > +			new_state = THP7312_FOCUS_STATE_AUTO;
> > +		else if (thp7312->focus_start->is_new)
> > +			new_state = THP7312_FOCUS_STATE_ONESHOT;
> > +		break;
> > +
> > +	case THP7312_FOCUS_STATE_AUTO:
> > +		if (!thp7312->focus_auto->val)
> > +			new_state = THP7312_FOCUS_STATE_LOCKED;
> > +		break;
> > +
> > +	case THP7312_FOCUS_STATE_LOCKED:
> > +		if (thp7312->focus_auto->val)
> > +			new_state = THP7312_FOCUS_STATE_AUTO;
> > +		else if (thp7312->focus_start->is_new)
> > +			new_state = THP7312_FOCUS_STATE_ONESHOT;
> > +		else if (thp7312->focus_absolute->is_new)
> > +			new_state = THP7312_FOCUS_STATE_MANUAL;
> > +		break;
> > +
> > +	case THP7312_FOCUS_STATE_ONESHOT:
> > +		if (thp7312->focus_auto->val)
> > +			new_state = THP7312_FOCUS_STATE_AUTO;
> > +		else if (thp7312->focus_start->is_new)
> > +			new_state = THP7312_FOCUS_STATE_ONESHOT;
> > +		else if (thp7312->focus_absolute->is_new)
> > +			new_state = THP7312_FOCUS_STATE_MANUAL;
> > +		break;
> > +	}
> > +
> > +	/*
> > +	 * If neither the state nor the focus method has changed, and no new
> > +	 * one-shot focus is requested, there's nothing new to program to the
> > +	 * hardware.
> > +	 */
> > +	if (thp7312->focus_state == new_state &&
> > +	    !thp7312->focus_method->is_new && !thp7312->focus_start->is_new)
> > +		return 0;
> > +
> > +	continuous = new_state == THP7312_FOCUS_STATE_MANUAL ||
> > +		     new_state == THP7312_FOCUS_STATE_ONESHOT;
> > +
> > +	switch (thp7312->focus_method->val) {
> > +	case THP7312_FOCUS_METHOD_CONTRAST:
> > +	default:
> > +		af_setting = continuous
> > +			   ? THP7312_REG_AF_SETTING_CONTINUOUS_CONTRAST
> > +			   : THP7312_REG_AF_SETTING_ONESHOT_CONTRAST;
> > +		break;
> > +	case THP7312_FOCUS_METHOD_PDAF:
> > +		af_setting = continuous
> > +			   ? THP7312_REG_AF_SETTING_CONTINUOUS_PDAF
> > +			   : THP7312_REG_AF_SETTING_ONESHOT_PDAF;
> > +		break;
> > +	case THP7312_FOCUS_METHOD_HYBRID:
> > +		af_setting = continuous
> > +			   ? THP7312_REG_AF_SETTING_CONTINUOUS_HYBRID
> > +			   : THP7312_REG_AF_SETTING_ONESHOT_HYBRID;
> > +		break;
> > +	}
> > +
> > +	switch (new_state) {
> > +	case THP7312_FOCUS_STATE_MANUAL:
> > +	default:
> > +		af_control = THP7312_REG_AF_CONTROL_MANUAL;
> > +		break;
> > +	case THP7312_FOCUS_STATE_AUTO:
> > +	case THP7312_FOCUS_STATE_ONESHOT:
> > +		af_control = THP7312_REG_AF_CONTROL_AF;
> > +		break;
> > +	case THP7312_FOCUS_STATE_LOCKED:
> > +		af_control = THP7312_REG_AF_CONTROL_LOCK;
> > +		break;
> > +	}
> > +
> > +	cci_write(thp7312->regmap, THP7312_REG_AF_SETTING, af_setting, &ret);
> > +
> > +	if (new_state == THP7312_FOCUS_STATE_MANUAL &&
> > +	    (thp7312->focus_state == THP7312_FOCUS_STATE_AUTO ||
> > +	     thp7312->focus_state == THP7312_FOCUS_STATE_ONESHOT)) {
> > +		/* When switching to manual state, lock AF first. */
> > +		cci_write(thp7312->regmap, THP7312_REG_AF_CONTROL,
> > +			  THP7312_REG_AF_CONTROL_LOCK, &ret);
> > +	}
> > +
> > +	cci_write(thp7312->regmap, THP7312_REG_AF_CONTROL, af_control, &ret);
> > +
> > +	if (ret)
> > +		return ret;
> > +
> > +	thp7312->focus_state = new_state;
> > +
> > +	return 0;
> > +}
> > +
> > +static int thp7312_s_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > +	struct thp7312_device *thp7312 = to_thp7312_from_ctrl(ctrl);
> > +	struct device *dev = thp7312->dev;
> > +	int ret = 0;
> > +	u8 value;
> > +
> > +	if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE)
> > +		return -EINVAL;
> > +
> > +	dev_dbg(dev, "s_ctrl id %s, value %d\n", ctrl->name, ctrl->val);
> > +
> > +	if (!pm_runtime_get_if_in_use(dev))
> > +		return 0;
> > +
> > +	switch (ctrl->id) {
> > +	case V4L2_CID_BRIGHTNESS:
> > +		value = clamp_t(int, ctrl->val, -10, 10) + 10;
> 
> Is the clamping needed here? It looks like the control range is set up
> correctly. And if it wasn't, it should be fixed there, not clamping here.

Ack.

> > +		cci_write(thp7312->regmap, THP7312_REG_BRIGHTNESS, value, &ret);
> > +		break;
> > +
> > +	case V4L2_CID_THP7312_LOW_LIGHT_COMPENSATION:
> > +		/* 0 = Auto adjust frame rate, 1 = Fix frame rate */
> > +		value = ctrl->val ? 0 : 1;
> 
> You can simply use ctrl->val below.

Indeed.

> > +		cci_write(thp7312->regmap, THP7312_REG_AE_FIX_FRAME_RATE, value,
> > +			  &ret);
> > +		break;
> > +
> > +	case V4L2_CID_FOCUS_AUTO:
> > +	case V4L2_CID_FOCUS_ABSOLUTE:
> > +	case V4L2_CID_AUTO_FOCUS_START:
> > +	case V4L2_CID_THP7312_AUTO_FOCUS_METHOD:
> > +		ret = thp7312_set_focus(thp7312);
> > +		break;
> > +
> > +	case V4L2_CID_ROTATE:
> > +		if (ctrl->val == 0)
> > +			value = 0; /* 0 degree. camera is set to normal.*/
> > +		else
> > +			value = 3; /* 180 degree. camera is set to flip & mirror */
> > +
> > +		cci_write(thp7312->regmap, THP7312_REG_FLIP_MIRROR, value, &ret);
> 
> ..., ctrl->val ? 3 : 0, ...
> 
> Up to you. The comment is worth having IMO.

I'll see chat I can do.

> > +		break;
> > +
> > +	case V4L2_CID_THP7312_NOISE_REDUCTION_AUTO:
> > +	case V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE:
> > +		/* Ignore the manually set value if auto has been set */
> > +		value = thp7312->noise_reduction_auto->val
> > +		      ? 0 : 0x80 | (thp7312->noise_reduction_absolute->val & 0x7f);
> 
> "?" should be on the preceding line.

Isn't that a matter of coding style preference ?

> > +
> > +		cci_write(thp7312->regmap, THP7312_REG_NOISE_REDUCTION, value,
> > +			  &ret);
> > +		break;
> > +
> > +	case V4L2_CID_AUTO_WHITE_BALANCE:
> > +		value = ctrl->val ? THP7312_WB_MODE_AUTO : THP7312_WB_MODE_MANUAL;
> 
> I'd do this in the call, up to you.

Only if you allow lines longer than 80 columns ;-)

> > +
> > +		cci_write(thp7312->regmap, THP7312_REG_WB_MODE, value, &ret);
> > +		break;
> > +
> > +	case V4L2_CID_RED_BALANCE:
> > +		cci_write(thp7312->regmap, THP7312_REG_MANUAL_WB_RED_GAIN,
> > +			  ctrl->val, &ret);
> > +		break;
> > +
> > +	case V4L2_CID_BLUE_BALANCE:
> > +		cci_write(thp7312->regmap, THP7312_REG_MANUAL_WB_BLUE_GAIN,
> > +			  ctrl->val, &ret);
> > +		break;
> > +
> > +	case V4L2_CID_AUTO_EXPOSURE_BIAS:
> > +		cci_write(thp7312->regmap, THP7312_REG_AE_EXPOSURE_COMPENSATION,
> > +			  ctrl->val, &ret);
> > +		break;
> > +
> > +	case V4L2_CID_POWER_LINE_FREQUENCY:
> > +		if (ctrl->val == V4L2_CID_POWER_LINE_FREQUENCY_60HZ) {
> > +			value = THP7312_AE_FLICKER_MODE_60;
> > +		} else if (ctrl->val == V4L2_CID_POWER_LINE_FREQUENCY_50HZ) {
> > +			value = THP7312_AE_FLICKER_MODE_50;
> > +		} else {
> > +			if (thp7312->fw_major_version == 40 && thp7312->fw_minor_version == 03) {
> > +				/* THP7312_AE_FLICKER_MODE_DISABLE is not supported */
> > +				value = THP7312_AE_FLICKER_MODE_50;
> > +			} else {
> > +				value = THP7312_AE_FLICKER_MODE_DISABLE;
> > +			}
> > +		}
> > +
> > +		cci_write(thp7312->regmap, THP7312_REG_AE_FLICKER_MODE,
> > +			  value, &ret);
> > +		break;
> > +
> > +	case V4L2_CID_SATURATION:
> > +		cci_write(thp7312->regmap, THP7312_REG_SATURATION,
> > +			  ctrl->val, &ret);
> > +		break;
> > +
> > +	case V4L2_CID_CONTRAST:
> > +		cci_write(thp7312->regmap, THP7312_REG_CONTRAST,
> > +			  ctrl->val, &ret);
> > +		break;
> > +
> > +	case V4L2_CID_SHARPNESS:
> > +		cci_write(thp7312->regmap, THP7312_REG_SHARPNESS,
> > +			  ctrl->val, &ret);
> > +		break;
> > +
> > +	default:
> > +		break;
> > +	}
> > +
> > +	pm_runtime_put(dev);
> > +
> > +	return ret;
> > +}
> > +
> > +static const struct v4l2_ctrl_ops thp7312_ctrl_ops = {
> > +	.s_ctrl = thp7312_s_ctrl,
> > +};
> > +
> > +/*
> > + * Refer to Documentation/userspace-api/media/drivers/thp7312.rst for details.
> > + *
> > + * TODO: Do we actually need this control, or could we hardcode the method to
> > + * contrast-based when the sensor doesn't support PDAF (as it would be the only
> > + * option in that case), and hybrid mode otherwise ?
> > + */
> > +static const struct v4l2_ctrl_config thp7312_ctrl_focus_method = {
> > +	.ops = &thp7312_ctrl_ops,
> > +	.id = V4L2_CID_THP7312_AUTO_FOCUS_METHOD,
> > +	.name = "Auto-Focus Method",
> > +	.type = V4L2_CTRL_TYPE_INTEGER,
> > +	.min = 0,
> > +	.def = 2,
> > +	.max = 2,
> > +	.step = 1,
> > +};
> > +
> > +static const struct v4l2_ctrl_config thp7312_v4l2_ctrls_custom[] = {
> > +	{
> > +		.ops = &thp7312_ctrl_ops,
> > +		.id = V4L2_CID_THP7312_LOW_LIGHT_COMPENSATION,
> > +		.name = "Low Light Compensation",
> > +		.type = V4L2_CTRL_TYPE_BOOLEAN,
> > +		.min = 0,
> > +		.def = 1,
> > +		.max = 1,
> > +		.step = 1,
> > +	}, {
> > +		.ops = &thp7312_ctrl_ops,
> > +		.id = V4L2_CID_THP7312_NOISE_REDUCTION_AUTO,
> > +		.name = "Noise Reduction Auto",
> > +		.type = V4L2_CTRL_TYPE_BOOLEAN,
> > +		.min = 0,
> > +		.def = 1,
> > +		.max = 1,
> > +		.step = 1,
> > +	}, {
> > +		.ops = &thp7312_ctrl_ops,
> > +		.id = V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE,
> > +		.name = "Noise Reduction Level",
> > +		.type = V4L2_CTRL_TYPE_INTEGER,
> > +		.min = 0,
> > +		.def = 0,
> > +		.max = 10,
> > +		.step = 1,
> > +	},
> > +};
> > +
> > +static const s64 exp_bias_qmenu[] = {
> > +	-2000, -1667, -1333, -1000, -667, -333, 0, 333, 667, 1000, 1333, 1667, 2000
> > +};
> > +
> > +static int thp7312_init_controls(struct thp7312_device *thp7312)
> > +{
> > +	struct v4l2_ctrl_handler *hdl = &thp7312->ctrl_handler;
> > +	struct device *dev = thp7312->dev;
> > +	struct v4l2_fwnode_device_properties props;
> > +	unsigned int i;
> > +	int ret;
> > +
> > +	thp7312->focus_state = THP7312_FOCUS_STATE_MANUAL;
> > +
> > +	v4l2_ctrl_handler_init(hdl, 16 + ARRAY_SIZE(thp7312_v4l2_ctrls_custom));
> > +
> > +	/*
> > +	 * TODO: Don't expose focus controls if the sensor module doesn't have
> > +	 * focus support.
> > +	 */
> > +	thp7312->focus_auto = v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops,
> > +						V4L2_CID_FOCUS_AUTO,
> > +						0, 1, 1, 1);
> > +	thp7312->focus_absolute =
> > +		v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_FOCUS_ABSOLUTE,
> > +				  0, ARRAY_SIZE(thp7312_focus_values), 1, 0);
> > +	thp7312->focus_method =
> > +		v4l2_ctrl_new_custom(hdl, &thp7312_ctrl_focus_method, NULL);
> > +
> > +	thp7312->focus_start = v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops,
> > +						 V4L2_CID_AUTO_FOCUS_START,
> > +						 1, 1, 1, 1);
> > +
> > +	v4l2_ctrl_cluster(4, &thp7312->focus_auto);
> > +
> > +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_AUTO_WHITE_BALANCE,
> > +			  0, 1, 1, 1);
> > +	/* 32: 1x, 255: 7.95x */
> > +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_RED_BALANCE,
> > +			  32, 255, 1, 64);
> > +	/* 32: 1x, 255: 7.95x */
> > +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_BLUE_BALANCE,
> > +			  32, 255, 1, 50);
> > +
> > +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_BRIGHTNESS,
> > +			  -10, 10, 1, 0);
> > +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_SATURATION,
> > +			  0, 31, 1, 10);
> > +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_CONTRAST,
> > +			  0, 20, 1, 10);
> > +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_SHARPNESS,
> > +			  0, 31, 1, 8);
> > +
> > +	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_ROTATE,
> > +			  0, 180, 180, 0);
> > +
> > +	v4l2_ctrl_new_int_menu(hdl, &thp7312_ctrl_ops,
> > +			       V4L2_CID_AUTO_EXPOSURE_BIAS,
> > +			       ARRAY_SIZE(exp_bias_qmenu) - 1,
> > +			       ARRAY_SIZE(exp_bias_qmenu) / 2, exp_bias_qmenu);
> > +
> > +	v4l2_ctrl_new_std_menu(hdl, &thp7312_ctrl_ops,
> > +			       V4L2_CID_POWER_LINE_FREQUENCY,
> > +			       V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0,
> > +			       V4L2_CID_POWER_LINE_FREQUENCY_50HZ);
> > +
> > +	/* set properties from fwnode (e.g. rotation, orientation) */
> > +	ret = v4l2_fwnode_device_parse(dev, &props);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to parse fwnode: %d\n", ret);
> > +		goto error;
> > +	}
> > +
> > +	ret = v4l2_ctrl_new_fwnode_properties(hdl, &thp7312_ctrl_ops, &props);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to create new v4l2 ctrl for fwnode properties: %d\n", ret);
> > +		goto error;
> > +	}
> > +
> > +	for (i = 0; i < ARRAY_SIZE(thp7312_v4l2_ctrls_custom); i++) {
> > +		const struct v4l2_ctrl_config *ctrl_cfg =
> > +			&thp7312_v4l2_ctrls_custom[i];
> > +		struct v4l2_ctrl *ctrl;
> > +
> > +		ctrl = v4l2_ctrl_new_custom(hdl, ctrl_cfg, NULL);
> > +
> > +		if (ctrl_cfg->id == V4L2_CID_THP7312_NOISE_REDUCTION_AUTO)
> > +			thp7312->noise_reduction_auto = ctrl;
> > +		else if (ctrl_cfg->id == V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE)
> > +			thp7312->noise_reduction_absolute = ctrl;
> > +	}
> > +
> > +	v4l2_ctrl_cluster(2, &thp7312->noise_reduction_auto);
> > +
> > +	if (hdl->error) {
> > +		dev_err(dev, "v4l2_ctrl_handler error\n");
> > +		ret = hdl->error;
> > +		goto error;
> > +	}
> > +
> > +	return ret;
> > +
> > +error:
> > +	v4l2_ctrl_handler_free(hdl);
> > +	return ret;
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> > + * Firmware Update
> > + */
> > +
> > +/*
> > + * The firmware data is made of 128kB of RAM firmware, followed by a
> > + * variable-size "header". Both are stored in flash memory.
> > + */
> > +#define THP7312_FW_RAM_SIZE			(128 * 1024)
> > +#define THP7312_FW_MIN_SIZE			(THP7312_FW_RAM_SIZE + 4)
> > +#define THP7312_FW_MAX_SIZE			(THP7312_FW_RAM_SIZE + 64 * 1024)
> > +
> > +/*
> > + * Data is first uploaded to the THP7312 128kB SRAM, and then written to flash.
> > + * The SRAM is exposed over I2C as 32kB banks, and up to 4kB of data can be
> > + * transferred in a single I2C write.
> > + */
> > +#define THP7312_RAM_BANK_SIZE			(32 * 1024)
> > +#define THP7312_FW_DOWNLOAD_UNIT		(4 * 1024)
> > +
> > +#define THP7312_FLASH_MEMORY_ERASE_TIMEOUT	40
> > +
> > +#define THP7312_FLASH_MAX_REG_READ_SIZE		10
> > +#define THP7312_FLASH_MAX_REG_DATA_SIZE		10
> > +
> > +static const u8 thp7312_cmd_config_flash_mem_if[] = {
> > +	0xd5, 0x18, 0x00, 0x00, 0x00, 0x80
> > +};
> > +
> > +static const u8 thp7312_cmd_write_to_reg[] = {
> > +	0xd5, 0x0c, 0x80, 0x00, 0x00, 0x00
> > +};
> > +
> > +static const u8 thp7312_cmd_read_reg[] = {
> > +	0xd5, 0x04
> > +};
> > +
> > +/*
> > + * THP7312 Write data from RAM to Flash Memory
> > + * Command ID FF700F
> > + * Format: FF700F AA AA AA BB BB BB
> > + * AA AA AA: destination start address
> > + * BB BB BB: (write size - 1)
> > + * Source address always starts from 0
> > + */
> > +static const u8 thp7312_cmd_write_ram_to_flash[] = { 0xff, 0x70, 0x0f };
> > +
> > +/*
> > + * THP7312 Calculate CRC command
> > + * Command ID: FF70 09
> > + * Format: FF70 09 AA AA AA BB BB BB
> > + * AA AA AA: Start address of calculation
> > + * BB BB BB: (calculate size - 1)
> > + */
> > +static const u8 thp7312_cmd_calc_crc[] = { 0xff, 0x70, 0x09 };
> > +
> > +static const u8 thp7312_jedec_rdid[] = { SPINOR_OP_RDID, 0x00, 0x00, 0x00 };
> > +static const u8 thp7312_jedec_rdsr[] = { SPINOR_OP_RDSR, 0x00, 0x00, 0x00 };
> > +static const u8 thp7312_jedec_wen[] = { SPINOR_OP_WREN };
> > +
> > +static int thp7312_read_firmware_version(struct thp7312_device *thp7312)
> > +{
> > +	u64 val = 0;
> > +	int ret = 0;
> > +
> > +	cci_read(thp7312->regmap, THP7312_REG_FIRMWARE_VERSION_1, &val, &ret);
> > +	thp7312->fw_major_version = val;
> > +
> > +	cci_read(thp7312->regmap, THP7312_REG_FIRMWARE_VERSION_2, &val, &ret);
> > +	thp7312->fw_minor_version = val;
> > +
> > +	return ret;
> > +}
> > +
> > +static int thp7312_write_buf(struct thp7312_device *thp7312,
> > +			     const u8 *write_buf, u16 write_size)
> > +{
> > +	struct i2c_client *client = to_i2c_client(thp7312->dev);
> > +	int ret;
> > +
> > +	ret = i2c_master_send(client, write_buf, write_size);
> 
> A newline here would be nice.
> 
> > +	return ret >= 0 ? 0 : ret;
> > +}
> > +
> > +static int __thp7312_flash_reg_write(struct thp7312_device *thp7312,
> > +				     const u8 *write_buf, u16 write_size)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	u8 temp_write_buf[THP7312_FLASH_MAX_REG_DATA_SIZE + 2];
> > +	int ret;
> > +
> > +	if (write_size > THP7312_FLASH_MAX_REG_DATA_SIZE) {
> > +		dev_err(dev, "%s: Write size error size = %d\n",
> > +			__func__, write_size);
> > +		return -EINVAL;
> > +	}
> > +
> > +	ret = thp7312_write_buf(thp7312, thp7312_cmd_config_flash_mem_if,
> > +				sizeof(thp7312_cmd_config_flash_mem_if));
> > +	if (ret < 0) {
> > +		dev_err(dev, "%s: Failed to config flash memory IF: %d\n",
> > +			__func__, ret);
> > +		return ret;
> > +	}
> > +
> > +	temp_write_buf[0] = 0xd5;
> > +	temp_write_buf[1] = 0x00;
> > +	memcpy((temp_write_buf + 2), write_buf, write_size);
> > +	ret = thp7312_write_buf(thp7312, temp_write_buf, write_size + 2);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	thp7312_write_buf(thp7312, thp7312_cmd_write_to_reg,
> > +			  sizeof(thp7312_cmd_write_to_reg));
> > +
> > +	return 0;
> > +}
> > +
> > +static int __thp7312_flash_reg_read(struct thp7312_device *thp7312,
> > +				    const u8 *write_buf, u16 write_size,
> > +				    u8 *read_buf, u16 read_size)
> > +{
> > +	struct i2c_client *client = to_i2c_client(thp7312->dev);
> > +	struct i2c_msg msgs[2];
> > +	int ret;
> > +
> > +	ret = __thp7312_flash_reg_write(thp7312, write_buf, write_size);
> > +	if (ret)
> > +		return ret;
> > +
> > +	msgs[0].addr = client->addr;
> > +	msgs[0].flags = 0;
> > +	msgs[0].len = sizeof(thp7312_cmd_read_reg),
> > +	msgs[0].buf = (u8 *)thp7312_cmd_read_reg;
> > +
> > +	msgs[1].addr = client->addr;
> > +	msgs[1].flags = I2C_M_RD;
> > +	msgs[1].len = read_size;
> > +	msgs[1].buf = read_buf;
> > +
> > +	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> > +	return ret >= 0 ? 0 : ret;
> > +}
> > +
> > +#define thp7312_flash_reg_write(thp7312, wrbuf) \
> > +	__thp7312_flash_reg_write(thp7312, wrbuf, sizeof(wrbuf))
> > +
> > +#define thp7312_flash_reg_read(thp7312, wrbuf, rdbuf) \
> > +	__thp7312_flash_reg_read(thp7312, wrbuf, sizeof(wrbuf), \
> > +				 rdbuf, sizeof(rdbuf))
> > +
> > +static enum fw_upload_err thp7312_fw_prepare_config(struct thp7312_device *thp7312)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	int ret;
> > +
> > +	ret = cci_write(thp7312->regmap, THP7312_REG_FW_MEMORY_IO_SETTING,
> > +			THP7312_FW_MEMORY_IO_GPIO0, NULL);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to set flash memory I/O\n");
> > +		return FW_UPLOAD_ERR_HW_ERROR;
> > +	}
> > +
> > +	/* Set max drivability. */
> > +	ret = cci_write(thp7312->regmap, THP7312_REG_FW_DRIVABILITY, 0x00777777,
> > +			NULL);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to set drivability: %d\n", ret);
> > +		return FW_UPLOAD_ERR_HW_ERROR;
> > +	}
> > +
> > +	return FW_UPLOAD_ERR_NONE;
> > +}
> > +
> > +static enum fw_upload_err thp7312_fw_prepare_check(struct thp7312_device *thp7312)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	u8 read_buf[3] = { 0 };
> > +	int ret;
> > +
> > +	/* Get JEDEC ID */
> > +	ret = thp7312_flash_reg_read(thp7312, thp7312_jedec_rdid, read_buf);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to get JEDEC ID: %d\n", ret);
> > +		return FW_UPLOAD_ERR_HW_ERROR;
> > +	}
> > +
> > +	dev_dbg(dev, "Flash Memory: JEDEC ID = 0x%x 0x%x 0x%x\n",
> > +		read_buf[0], read_buf[1], read_buf[2]);
> > +
> > +	return FW_UPLOAD_ERR_NONE;
> > +}
> > +
> > +static enum fw_upload_err thp7312_fw_prepare_reset(struct thp7312_device *thp7312)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	int ret;
> > +
> > +	ret = cci_write(thp7312->regmap, THP7312_REG_FW_RESET_FLASH, 0x81, NULL);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to reset flash memory: %d\n", ret);
> > +		return FW_UPLOAD_ERR_HW_ERROR;
> > +	}
> > +
> > +	return FW_UPLOAD_ERR_NONE;
> > +}
> > +
> > +/* TODO: Erase only the amount of blocks necessary */
> > +static enum fw_upload_err thp7312_flash_erase(struct thp7312_device *thp7312)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	u8 read_buf[1] = { 0 };
> > +	unsigned int i;
> > +	u8 block;
> > +	int ret;
> > +
> > +	for (block = 0; block < 3; block++) {
> > +		const u8 jedec_se[] = { SPINOR_OP_SE, block, 0x00, 0x00 };
> > +
> > +		ret = thp7312_flash_reg_write(thp7312, thp7312_jedec_wen);
> > +		if (ret < 0) {
> > +			dev_err(dev, "Failed to enable flash for writing\n");
> > +			return FW_UPLOAD_ERR_RW_ERROR;
> > +		}
> > +
> > +		ret = thp7312_flash_reg_write(thp7312, jedec_se);
> > +		if (ret < 0) {
> > +			dev_err(dev, "Failed to erase flash sector\n");
> > +			return FW_UPLOAD_ERR_RW_ERROR;
> > +		}
> > +
> > +		for (i = 0; i < THP7312_FLASH_MEMORY_ERASE_TIMEOUT; i++) {
> > +			usleep_range(100000, 101000);
> > +			thp7312_flash_reg_read(thp7312, thp7312_jedec_rdsr,
> > +					       read_buf);
> > +
> > +			/* Check Busy bit. Busy == 0x0 means erase complete. */
> > +			if (!(read_buf[0] & SR_WIP))
> > +				break;
> > +		}
> > +
> > +		if (i == THP7312_FLASH_MEMORY_ERASE_TIMEOUT)
> > +			return FW_UPLOAD_ERR_TIMEOUT;
> > +	}
> > +
> > +	thp7312_flash_reg_read(thp7312, thp7312_jedec_rdsr, read_buf);
> > +
> > +	/* Check WEL bit. */
> > +	if (read_buf[0] & SR_WEL)
> > +		return FW_UPLOAD_ERR_HW_ERROR;
> > +
> > +	return FW_UPLOAD_ERR_NONE;
> > +}
> > +
> > +static enum fw_upload_err
> > +thp7312_write_download_data_by_unit(struct thp7312_device *thp7312,
> > +				    unsigned int addr, const u8 *data,
> > +				    unsigned int size)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	u8 *write_buf = thp7312->fw_write_buf;
> > +	int ret;
> > +
> > +	dev_dbg(dev, "%s: addr = 0x%04x, data = 0x%p, size = %u\n",
> > +		__func__, addr, data, size);
> > +
> > +	write_buf[0] = (addr >> 8) & 0xff;
> > +	write_buf[1] = (addr >> 0) & 0xff;
> > +	memcpy(&write_buf[2], data, size);
> > +
> > +	/*
> > +	 * THP7312 Firmware download to RAM
> > +	 * Command ID (address to download): 0x0000 - 0x7fff
> > +	 * Format:: 0000 XX XX XX ........ XX
> > +	 */
> > +	ret = thp7312_write_buf(thp7312, write_buf, size + 2);
> > +	if (ret < 0)
> > +		dev_err(dev, "Unit transfer ERROR %s(): ret = %d\n", __func__, ret);
> > +
> > +	return ret >= 0 ? FW_UPLOAD_ERR_NONE : FW_UPLOAD_ERR_RW_ERROR;
> > +}
> > +
> > +static enum fw_upload_err thp7312_fw_load_to_ram(struct thp7312_device *thp7312,
> > +						 const u8 *data, u32 size)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	enum fw_upload_err ret;
> > +	unsigned int num_banks;
> > +	unsigned int i, j;
> > +
> > +	num_banks = DIV_ROUND_UP(size, THP7312_RAM_BANK_SIZE);
> > +
> > +	dev_dbg(dev, "%s: loading %u bytes in SRAM (%u banks)\n", __func__,
> > +		size, num_banks);
> > +
> > +	for (i = 0; i < num_banks; i++) {
> > +		const u32 bank_addr = 0x10000000 | (i * THP7312_RAM_BANK_SIZE);
> > +		unsigned int bank_size;
> > +		unsigned int num_chunks;
> > +
> > +		ret = cci_write(thp7312->regmap, THP7312_REG_FW_DEST_BANK_ADDR,
> > +				bank_addr, NULL);
> > +		if (ret)
> > +			return FW_UPLOAD_ERR_HW_ERROR;
> > +
> > +		bank_size = min_t(u32, size, THP7312_RAM_BANK_SIZE);
> > +		num_chunks = DIV_ROUND_UP(bank_size, THP7312_FW_DOWNLOAD_UNIT);
> > +
> > +		dev_dbg(dev, "%s: loading %u bytes in SRAM bank %u (%u chunks)\n",
> > +			__func__, bank_size, i, num_chunks);
> > +
> > +		for (j = 0 ; j < num_chunks; j++) {
> > +			unsigned int chunk_addr;
> > +			unsigned int chunk_size;
> > +
> > +			chunk_addr = j * THP7312_FW_DOWNLOAD_UNIT;
> > +			chunk_size = min_t(u32, size, THP7312_FW_DOWNLOAD_UNIT);
> > +
> > +			ret = thp7312_write_download_data_by_unit(thp7312, chunk_addr,
> > +								  data, chunk_size);
> > +			if (ret != FW_UPLOAD_ERR_NONE) {
> > +				dev_err(dev, "Unit transfer ERROR at bank transfer %s(): %d\n",
> > +					__func__, j);
> > +				return ret;
> > +			}
> > +
> > +			data += chunk_size;
> > +			size -= chunk_size;
> > +		}
> > +	}
> > +
> > +	return FW_UPLOAD_ERR_NONE;
> > +}
> > +
> > +static enum fw_upload_err thp7312_fw_write_to_flash(struct thp7312_device *thp7312,
> > +						    u32 dest, u32 write_size)
> > +{
> > +	u8 command[sizeof(thp7312_cmd_write_ram_to_flash) + 6];
> > +	static const u32 cmd_size = sizeof(thp7312_cmd_write_ram_to_flash);
> > +	u64 val;
> > +	int ret;
> > +
> > +	memcpy(command, thp7312_cmd_write_ram_to_flash, cmd_size);
> > +
> > +	command[cmd_size] = (dest & 0xff0000) >> 16;
> > +	command[cmd_size + 1] = (dest & 0x00ff00) >> 8;
> > +	command[cmd_size + 2] = (dest & 0x0000ff);
> > +	command[cmd_size + 3] = ((write_size - 1) & 0xff0000) >> 16;
> > +	command[cmd_size + 4] = ((write_size - 1) & 0x00ff00) >> 8;
> > +	command[cmd_size + 5] = ((write_size - 1) & 0x0000ff);
> > +
> > +	ret = thp7312_write_buf(thp7312, command, sizeof(command));
> > +	if (ret < 0)
> > +		return FW_UPLOAD_ERR_RW_ERROR;
> > +
> > +	usleep_range(8000000, 8100000);
> 
> I guess there's time to make some tea here?

For a flash infusion, gong fu style, probably.

We don't have much documentation about the exact values of the delays
that are needed, and why :-(

> > +
> > +	ret = cci_read(thp7312->regmap, THP7312_REG_FW_VERIFY_RESULT, &val,
> > +		       NULL);
> > +	if (ret < 0)
> > +		return FW_UPLOAD_ERR_RW_ERROR;
> > +
> > +	return val ?  FW_UPLOAD_ERR_HW_ERROR : FW_UPLOAD_ERR_NONE;
> > +}
> > +
> > +static enum fw_upload_err thp7312_fw_check_crc(struct thp7312_device *thp7312,
> > +					       const u8 *fw_data, u32 fw_size)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	u16 header_size = fw_size - THP7312_FW_RAM_SIZE;
> > +	u8 command[sizeof(thp7312_cmd_calc_crc) + 6];
> > +	static const u32 cmd_size = sizeof(thp7312_cmd_calc_crc);
> > +	u32 size = THP7312_FW_RAM_SIZE - 4;
> > +	u32 fw_crc;
> > +	u64 crc;
> > +	int ret;
> > +
> > +	memcpy(command, thp7312_cmd_calc_crc, cmd_size);
> > +
> > +	command[cmd_size] = 0;
> > +	command[cmd_size + 1] = (header_size >> 8) & 0xff;
> > +	command[cmd_size + 2] = header_size & 0xff;
> > +
> > +	command[cmd_size + 3] = (size >> 16) & 0xff;
> > +	command[cmd_size + 4] = (size >> 8) & 0xff;
> > +	command[cmd_size + 5] = size & 0xff;
> > +
> > +	ret = thp7312_write_buf(thp7312, command, sizeof(command));
> > +	if (ret < 0)
> > +		return FW_UPLOAD_ERR_RW_ERROR;
> > +
> > +	usleep_range(2000000, 2100000);
> > +
> > +	fw_crc = get_unaligned_be32(&fw_data[fw_size - 4]);
> > +
> > +	ret = cci_read(thp7312->regmap, THP7312_REG_FW_CRC_RESULT, &crc, NULL);
> > +	if (ret < 0)
> > +		return FW_UPLOAD_ERR_RW_ERROR;
> > +
> > +	if (fw_crc != crc) {
> > +		dev_err(dev, "CRC mismatch: firmware 0x%08x, flash 0x%08llx\n",
> > +			fw_crc, crc);
> > +		return FW_UPLOAD_ERR_HW_ERROR;
> > +	}
> > +
> > +	return FW_UPLOAD_ERR_NONE;
> > +}
> > +
> > +static enum fw_upload_err thp7312_fw_prepare(struct fw_upload *fw_upload,
> > +					     const u8 *data, u32 size)
> > +{
> > +	struct thp7312_device *thp7312 = fw_upload->dd_handle;
> > +	struct device *dev = thp7312->dev;
> > +	enum fw_upload_err ret;
> > +
> > +	mutex_lock(&thp7312->fw_lock);
> > +	thp7312->fw_cancel = false;
> > +	mutex_unlock(&thp7312->fw_lock);
> > +
> > +	if (size < THP7312_FW_MIN_SIZE || size > THP7312_FW_MAX_SIZE) {
> > +		dev_err(dev, "%s: Invalid firmware size %d; must be between %d and %d\n",
> > +			__func__, size, THP7312_FW_MIN_SIZE, THP7312_FW_MAX_SIZE);
> > +		return FW_UPLOAD_ERR_INVALID_SIZE;
> > +	}
> > +
> > +	ret = thp7312_fw_prepare_config(thp7312);
> > +	if (ret != FW_UPLOAD_ERR_NONE)
> > +		return ret;
> > +
> > +	ret = thp7312_fw_prepare_check(thp7312);
> > +	if (ret != FW_UPLOAD_ERR_NONE)
> > +		return ret;
> > +
> > +	ret = thp7312_fw_prepare_reset(thp7312);
> > +	if (ret != FW_UPLOAD_ERR_NONE)
> > +		return ret;
> > +
> > +	mutex_lock(&thp7312->fw_lock);
> > +	ret = thp7312->fw_cancel ? FW_UPLOAD_ERR_CANCELED : FW_UPLOAD_ERR_NONE;
> > +	mutex_unlock(&thp7312->fw_lock);
> > +
> > +	return ret;
> > +}
> > +
> > +static enum fw_upload_err thp7312_fw_write(struct fw_upload *fw_upload,
> > +					   const u8 *data, u32 offset,
> > +					   u32 size, u32 *written)
> > +{
> > +	struct thp7312_device *thp7312 = fw_upload->dd_handle;
> > +	struct device *dev = thp7312->dev;
> > +	u16 header_size = size - THP7312_FW_RAM_SIZE;
> > +	enum fw_upload_err ret;
> > +
> > +	mutex_lock(&thp7312->fw_lock);
> > +	if (thp7312->fw_cancel)
> > +		return FW_UPLOAD_ERR_CANCELED;
> > +	mutex_unlock(&thp7312->fw_lock);
> > +
> > +	ret = thp7312_flash_erase(thp7312);
> > +	if (ret != FW_UPLOAD_ERR_NONE)
> > +		return ret;
> > +
> > +	ret = thp7312_fw_load_to_ram(thp7312, data, THP7312_FW_RAM_SIZE);
> > +	if (ret != FW_UPLOAD_ERR_NONE)
> > +		return ret;
> > +
> > +	ret = thp7312_fw_write_to_flash(thp7312, 0, 0x1ffff);
> > +	if (ret != FW_UPLOAD_ERR_NONE)
> > +		return ret;
> > +
> > +	ret = thp7312_fw_load_to_ram(thp7312, data + THP7312_FW_RAM_SIZE, header_size);
> > +	if (ret != FW_UPLOAD_ERR_NONE)
> > +		return ret;
> > +
> > +	ret = thp7312_fw_write_to_flash(thp7312, 0x20000, header_size - 1);
> > +	if (ret != FW_UPLOAD_ERR_NONE)
> > +		return ret;
> > +
> > +	ret = thp7312_fw_check_crc(thp7312, data, size);
> > +	if (ret != FW_UPLOAD_ERR_NONE)
> > +		return ret;
> > +
> > +	dev_info(dev, "Successfully wrote firmware\n");
> > +
> > +	*written = size;
> > +	return FW_UPLOAD_ERR_NONE;
> > +}
> > +
> > +static enum fw_upload_err thp7312_fw_poll_complete(struct fw_upload *fw_upload)
> > +{
> > +	return FW_UPLOAD_ERR_NONE;
> > +}
> > +
> > +/*
> > + * This may be called asynchronously with an on-going update.  All other
> > + * functions are called sequentially in a single thread. To avoid contention on
> > + * register accesses, only update the cancel_request flag. Other functions will
> > + * check this flag and handle the cancel request synchronously.
> > + */
> > +static void thp7312_fw_cancel(struct fw_upload *fw_upload)
> > +{
> > +	struct thp7312_device *thp7312 = fw_upload->dd_handle;
> > +
> > +	mutex_lock(&thp7312->fw_lock);
> > +	thp7312->fw_cancel = true;
> > +	mutex_unlock(&thp7312->fw_lock);
> > +}
> > +
> > +static const struct fw_upload_ops thp7312_fw_upload_ops = {
> > +	.prepare = thp7312_fw_prepare,
> > +	.write = thp7312_fw_write,
> > +	.poll_complete = thp7312_fw_poll_complete,
> > +	.cancel = thp7312_fw_cancel,
> > +};
> > +
> > +static int thp7312_register_flash_mode(struct thp7312_device *thp7312)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	struct fw_upload *fwl;
> > +	u64 val;
> > +	int ret;
> > +
> > +	dev_info(dev, "booted in flash mode\n");
> > +
> > +	mutex_init(&thp7312->fw_lock);
> > +
> > +	thp7312->fw_write_buf = devm_kzalloc(dev, THP7312_FW_DOWNLOAD_UNIT + 2,
> > +					     GFP_KERNEL);
> > +	if (!thp7312->fw_write_buf)
> > +		return -ENOMEM;
> > +
> > +	ret = __thp7312_power_on(thp7312);
> > +	if (ret < 0)
> > +		return dev_err_probe(dev, ret, "Failed to power on\n");
> > +
> > +	ret = cci_read(thp7312->regmap, THP7312_REG_FW_STATUS, &val, NULL);
> > +	if (ret) {
> > +		dev_err_probe(dev, ret, "Camera status read failed\n");
> > +		goto error;
> > +	}
> > +
> > +	fwl = firmware_upload_register(THIS_MODULE, dev, "thp7312-firmware",
> > +				       &thp7312_fw_upload_ops, thp7312);
> > +	if (IS_ERR(fwl)) {
> > +		ret = PTR_ERR(fwl);
> > +		dev_err_probe(dev, ret, "Failed to register firmware upload\n");
> > +		goto error;
> > +	}
> > +
> > +	thp7312->fwl = fwl;
> > +	return 0;
> > +
> > +error:
> > +	thp7312_power_off(thp7312);
> > +	return ret;
> > +}
> > +
> > +/* -----------------------------------------------------------------------------
> 
> /*
>  * ...
> 
> I guess you could drop the dashes, too. Up to you.

I like them, they provide a better visual separation.

> > + * Probe & Remove
> > + */
> > +
> > +static int thp7312_get_regulators(struct thp7312_device *thp7312)
> > +{
> > +	unsigned int i;
> > +
> > +	for (i = 0; i < THP7312_NUM_SUPPLIES; i++)
> > +		thp7312->supplies[i].supply = thp7312_supply_name[i];
> > +
> > +	return devm_regulator_bulk_get(thp7312->dev,
> > +				       THP7312_NUM_SUPPLIES,
> > +				       thp7312->supplies);
> > +}
> > +
> > +static void thp7312_sensor_dev_release(struct device *dev)
> > +{
> > +	of_node_put(dev->of_node);
> > +	kfree(dev);
> > +}
> > +
> > +static int thp7312_sensor_init(struct thp7312_sensor *sensor, unsigned int index)
> > +{
> > +	struct thp7312_device *thp7312 = sensor->thp7312;
> > +	struct device *dev = thp7312->dev;
> > +	unsigned int i;
> > +	int ret;
> > +
> > +	sensor->index = index;
> > +
> > +	/*
> > +	 * Register a device for the sensor, to support usage of the regulator
> > +	 * API.
> > +	 */
> > +	sensor->dev = kzalloc(sizeof(*sensor->dev), GFP_KERNEL);
> > +	if (!sensor->dev)
> > +		return -ENOMEM;
> > +
> > +	sensor->dev->parent = dev;
> > +	sensor->dev->of_node = of_node_get(sensor->of_node);
> 
> This device could well find its way to a non-OF system. Could you use the
> fwnode property API instead?

I'm pretty sure there will be problems if someone was using this driver
on an ACPI-based system, so trying to pretend it's supported without
being able to test it may not be the best use of development time. I'll
try, but if I hit any issue, I'll keep using the OF-specific functions
in the next version.

> > +	sensor->dev->release = &thp7312_sensor_dev_release;
> > +	dev_set_name(sensor->dev, "%s-%s.%u", dev_name(dev),
> > +		     thp7312->sensor_info->name, index);
> > +
> > +	ret = device_register(sensor->dev);
> > +	if (ret < 0) {
> > +		dev_err(dev, "Failed to register device for sensor %u\n", index);
> > +		put_device(sensor->dev);
> > +		sensor->dev = NULL;
> > +		return ret;
> > +	}
> > +
> > +	/* Retrieve the power supplies for the sensor, if any. */
> > +	if (thp7312->sensor_info->supplies) {
> > +		const struct thp7312_sensor_supply *supplies =
> > +			thp7312->sensor_info->supplies;
> > +		unsigned int num_supplies;
> > +
> > +		for (num_supplies = 0; supplies[num_supplies].name; ++num_supplies)
> > +			;
> > +
> > +		sensor->supplies = devm_kcalloc(dev, num_supplies,
> > +						sizeof(*sensor->supplies),
> > +						GFP_KERNEL);
> > +		if (!sensor->supplies) {
> > +			ret = -ENOMEM;
> > +			goto error;
> > +		}
> > +
> > +		for (i = 0; i < num_supplies; ++i)
> > +			sensor->supplies[i].supply = supplies[i].name;
> > +
> > +		ret = regulator_bulk_get(sensor->dev, num_supplies,
> > +					 sensor->supplies);
> > +		if (ret < 0) {
> > +			dev_err(dev, "Failed to get supplies for sensor %u\n", index);
> > +			goto error;
> > +		}
> > +
> > +		sensor->num_supplies = i;
> > +	}
> > +
> > +	return 0;
> > +
> > +error:
> > +	device_unregister(sensor->dev);
> > +	return ret;
> > +}
> > +
> > +static int thp7312_init_sensors(struct thp7312_device *thp7312)
> > +{
> > +	unsigned int i;
> > +	int ret;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(thp7312->sensors); i++) {
> > +		struct thp7312_sensor *sensor = &thp7312->sensors[i];
> > +
> > +		if (!sensor->thp7312)
> > +			continue;
> > +
> > +		ret = thp7312_sensor_init(sensor, i);
> > +		if (ret < 0)
> > +			return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static void thp7312_sensor_cleanup(struct thp7312_sensor *sensor)
> > +{
> > +	if (sensor->num_supplies)
> > +		regulator_bulk_free(sensor->num_supplies, sensor->supplies);
> > +
> > +	if (sensor->dev)
> > +		device_unregister(sensor->dev);
> > +	of_node_put(sensor->of_node);
> > +}
> > +
> > +static void thp7312_remove_sensors(struct thp7312_device *thp7312)
> > +{
> > +	unsigned int i;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(thp7312->sensors); i++) {
> > +		struct thp7312_sensor *sensor = &thp7312->sensors[i];
> > +
> > +		if (!sensor->thp7312)
> > +			continue;
> > +
> > +		thp7312_sensor_cleanup(sensor);
> > +	}
> > +}
> > +
> > +static int thp7312_sensor_parse_dt(struct thp7312_device *thp7312,
> > +				   struct device_node *node)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	struct thp7312_sensor *sensor;
> > +	u32 data_lanes_rx[4];
> > +	const char *model;
> > +	unsigned int i;
> > +	u32 reg;
> > +	int ret;
> > +
> > +	if (!of_device_is_available(node))
> > +		return -ENODEV;
> > +
> > +	/* Retrieve the sensor index from the reg property. */
> > +	ret = of_property_read_u32(node, "reg", &reg);
> > +	if (ret < 0) {
> > +		dev_err(dev, "'reg' property missing in sensor node\n");
> 
> Shouldn't you assume it's zero instead?

The property is mandatory.

> > +		return -EINVAL;
> > +	}
> > +
> > +	if (reg >= ARRAY_SIZE(thp7312->sensors)) {
> > +		dev_err(dev, "Out-of-bounds 'reg' value %u\n", reg);
> > +		return -EINVAL;
> > +	}
> > +
> > +	sensor = &thp7312->sensors[reg];
> > +	if (sensor->thp7312) {
> > +		dev_err(dev, "Duplicate entry for sensor %u\n", reg);
> > +		return -EINVAL;
> > +	}
> > +
> > +	ret = of_property_read_string(node, "thine,model", &model);
> > +	if (ret < 0) {
> > +		dev_err(dev, "'thine,model' property missing in sensor node\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	for (i = 0; i < ARRAY_SIZE(thp7312_sensor_info); i++) {
> > +		const struct thp7312_sensor_info *info =
> > +			&thp7312_sensor_info[i];
> > +
> > +		if (!strcmp(info->model, model)) {
> > +			thp7312->sensor_info = info;
> > +			break;
> > +		}
> > +	}
> > +
> > +	if (!thp7312->sensor_info) {
> > +		dev_err(dev, "Unsupported sensor model %s\n", model);
> > +		return -EINVAL;
> > +	}
> > +
> > +	ret = of_property_read_u32_array(node, "data-lanes",
> > +					 data_lanes_rx, ARRAY_SIZE(data_lanes_rx));
> > +	if (ret < 0) {
> > +		dev_err(dev, "Failed to read property data-lanes: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	for (i = 0; i < ARRAY_SIZE(sensor->data_lanes); i++)
> > +		sensor->data_lanes[i] = (u8)data_lanes_rx[i];
> 
> I don't think you need the cast here.
> 
> > +
> > +	sensor->thp7312 = thp7312;
> > +	sensor->of_node = of_node_get(node);
> > +
> > +	return 0;
> > +}
> > +
> > +static int thp7312_parse_dt(struct thp7312_device *thp7312)
> > +{
> > +	struct device *dev = thp7312->dev;
> > +	struct fwnode_handle *endpoint;
> > +	struct device_node *sensors;
> > +	unsigned int num_sensors = 0;
> > +	struct device_node *node;
> > +	int ret;
> > +
> > +	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
> > +	if (!endpoint)
> > +		return dev_err_probe(dev, -EINVAL, "Endpoint node not found\n");
> > +
> > +	ret = v4l2_fwnode_endpoint_parse(endpoint, &thp7312->ep);
> 
> You should assign the bus_type before parsing. It is deprecated to guess
> it --- there's no universal guarantee it'll be successful.

As only CSI-2 is supported for now, I'll do so.

> > +	fwnode_handle_put(endpoint);
> > +	if (ret)
> > +		return dev_err_probe(dev, ret, "Could not parse endpoint\n");
> > +
> > +	if (thp7312->ep.bus_type != V4L2_MBUS_CSI2_DPHY)
> > +		return dev_err_probe(dev, -EINVAL, "Unsupported bus type %d\n",
> > +				     thp7312->ep.bus_type);
> > +
> > +	/*
> > +	 * The thine,boot-mode property is optional and default to
> > +	 * THP7312_BOOT_MODE_SPI_MASTER (1).
> > +	 */
> > +	thp7312->boot_mode = THP7312_BOOT_MODE_SPI_MASTER;
> > +	ret = of_property_read_u32(dev->of_node, "thine,boot-mode",
> > +				   &thp7312->boot_mode);
> > +	if (ret && ret != -EINVAL)
> > +		return dev_err_probe(dev, ret, "Property '%s' is invalid\n",
> > +				     "thine,boot-mode");
> > +
> > +	if (thp7312->boot_mode != THP7312_BOOT_MODE_2WIRE_SLAVE &&
> > +	    thp7312->boot_mode != THP7312_BOOT_MODE_SPI_MASTER)
> > +		return dev_err_probe(dev, -EINVAL, "Invalid '%s' value %u\n",
> > +				     "thine,boot-mode", thp7312->boot_mode);
> > +
> > +	/* Sensors */
> > +	sensors = of_get_child_by_name(dev->of_node, "sensors");
> > +	if (!sensors) {
> > +		dev_err(dev, "'sensors' child node not found\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	for_each_child_of_node(sensors, node) {
> > +		if (of_node_name_eq(node, "sensor")) {
> > +			if (!thp7312_sensor_parse_dt(thp7312, node))
> > +				num_sensors++;
> > +		}
> > +	}
> > +
> > +	of_node_put(sensors);
> > +
> > +	if (!num_sensors) {
> > +		dev_err(dev, "No sensor found\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int thp7312_probe(struct i2c_client *client)
> > +{
> > +	struct device *dev = &client->dev;
> > +	struct thp7312_device *thp7312;
> > +	int ret;
> > +
> > +	thp7312 = devm_kzalloc(dev, sizeof(*thp7312), GFP_KERNEL);
> > +	if (!thp7312)
> > +		return -ENOMEM;
> > +
> > +	thp7312->dev = dev;
> > +
> > +	thp7312->regmap = devm_cci_regmap_init_i2c(client, 16);
> > +	if (IS_ERR(thp7312->regmap))
> > +		return dev_err_probe(dev, PTR_ERR(thp7312->regmap),
> > +				     "Unable to initialize I2C\n");
> > +
> > +	ret = thp7312_parse_dt(thp7312);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = thp7312_get_regulators(thp7312);
> > +	if (ret)
> > +		return dev_err_probe(dev, ret, "Failed to get regulators\n");
> > +
> > +	thp7312->iclk = devm_clk_get(dev, NULL);
> > +	if (IS_ERR(thp7312->iclk))
> > +		return dev_err_probe(dev, PTR_ERR(thp7312->iclk),
> > +				     "Failed to get iclk\n");
> > +
> > +	thp7312->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> > +	if (IS_ERR(thp7312->reset_gpio))
> > +		return dev_err_probe(dev, PTR_ERR(thp7312->reset_gpio),
> > +				     "Failed to get reset gpio\n");
> > +
> > +	/*
> > +	 * TODO: Should we confirm that we're in the right boot mode or can we
> > +	 * trust the dt? Or is it better to check just to protect the user from
> > +	 * mistakes?
> > +	 */
> > +	if (thp7312->boot_mode == THP7312_BOOT_MODE_2WIRE_SLAVE)
> > +		return thp7312_register_flash_mode(thp7312);
> > +
> > +	thp7312->current_mode = &thp7312_mode_info_data[0];
> > +	thp7312->current_rate = &thp7312->current_mode->rates[0];
> > +
> > +	ret = thp7312_init_sensors(thp7312);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	v4l2_i2c_subdev_init(&thp7312->sd, client, &thp7312_subdev_ops);
> > +	thp7312->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
> > +	thp7312->pad.flags = MEDIA_PAD_FL_SOURCE;
> > +	thp7312->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> > +
> > +	ret = media_entity_pads_init(&thp7312->sd.entity, 1, &thp7312->pad);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = thp7312_power_on(thp7312);
> > +	if (ret)
> > +		goto entity_cleanup;
> > +
> > +	ret = thp7312_read_firmware_version(thp7312);
> > +	if (ret < 0) {
> > +		dev_err(dev, "Camera is not found\n");
> > +		goto power_off;
> > +	}
> > +
> > +	ret = thp7312_init_controls(thp7312);
> > +	if (ret)
> > +		goto power_off;
> > +
> > +	thp7312->sd.ctrl_handler = &thp7312->ctrl_handler;
> > +	thp7312->sd.state_lock = thp7312->ctrl_handler.lock;
> > +
> > +	ret = v4l2_subdev_init_finalize(&thp7312->sd);
> > +	if (ret < 0) {
> > +		dev_err(dev, "Subdev active state initialization failed\n");
> > +		goto free_ctrls;
> > +	}
> > +
> > +	ret = v4l2_async_register_subdev(&thp7312->sd);
> > +	if (ret < 0) {
> > +		dev_err(dev, "Subdev registration failed\n");
> > +		goto subdev_cleanup;
> > +	}
> > +
> > +	pm_runtime_set_active(dev);
> > +	pm_runtime_enable(dev);
> > +
> > +	dev_info(dev, "THP7312 firmware version %02u.%02u\n",
> > +		 thp7312->fw_major_version, thp7312->fw_minor_version);
> > +
> > +	return 0;
> > +
> > +subdev_cleanup:
> > +	v4l2_subdev_cleanup(&thp7312->sd);
> > +free_ctrls:
> > +	v4l2_ctrl_handler_free(&thp7312->ctrl_handler);
> > +power_off:
> > +	thp7312_power_off(thp7312);
> > +entity_cleanup:
> > +	media_entity_cleanup(&thp7312->sd.entity);
> > +	return ret;
> > +}
> > +
> > +static void thp7312_remove(struct i2c_client *client)
> > +{
> > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > +	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
> > +
> > +	if (thp7312->boot_mode == THP7312_BOOT_MODE_2WIRE_SLAVE) {
> > +		firmware_upload_unregister(thp7312->fwl);
> > +		return;
> > +	}
> > +
> > +	pm_runtime_disable(&client->dev);
> > +	v4l2_subdev_cleanup(&thp7312->sd);
> > +	thp7312_remove_sensors(thp7312);
> > +	v4l2_async_unregister_subdev(&thp7312->sd);
> > +	v4l2_ctrl_handler_free(&thp7312->ctrl_handler);
> > +	media_entity_cleanup(&thp7312->sd.entity);
> > +	v4l2_device_unregister_subdev(sd);
> > +}
> > +
> > +static const struct of_device_id thp7312_dt_ids[] = {
> > +	{ .compatible = "thine,thp7312" },
> > +	{ /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, thp7312_dt_ids);
> > +
> > +static struct i2c_driver thp7312_i2c_driver = {
> > +	.driver = {
> > +		.name  = "thp7312",
> > +		.pm = &thp7312_pm_ops,
> > +		.of_match_table	= thp7312_dt_ids,
> > +	},
> > +	.probe = thp7312_probe,
> > +	.remove = thp7312_remove,
> > +};
> > +
> > +module_i2c_driver(thp7312_i2c_driver);
> > +
> > +MODULE_DESCRIPTION("THP7312 MIPI Camera Subdev Driver");
> > +MODULE_LICENSE("GPL");
Laurent Pinchart Oct. 28, 2023, 3:18 p.m. UTC | #3
On Fri, Oct 27, 2023 at 02:50:09PM +0000, Sakari Ailus wrote:
> Hi Laurent,
> 
> On Fri, Oct 27, 2023 at 03:45:29PM +0300, Laurent Pinchart wrote:
> 
> ...
> 
> > > > +#include <linux/clk.h>
> > > > +#include <linux/delay.h>
> > > > +#include <linux/device.h>
> > > > +#include <linux/firmware.h>
> > > > +#include <linux/gpio/consumer.h>
> > > > +#include <linux/i2c.h>
> > > > +#include <linux/init.h>
> > > > +#include <linux/iopoll.h>
> > > > +#include <linux/kernel.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/mtd/spi-nor.h>
> > > > +#include <linux/of_device.h>
> > > > +#include <linux/pm_runtime.h>
> > > > +#include <linux/regulator/consumer.h>
> > > > +#include <linux/slab.h>
> > > > +#include <linux/thp7312.h>
> > > 
> > > uapi/linux/thp7321.h ?
> > 
> > Is that needed ?
> 
> It's a UAPI header. Wouldn't it be reasonable to include it that way
> (instead of relying on searching include/uapi as well)?

There are some occurences of '#include <uapi/' in drivers/ (I counted
338), but why is that better ?

> > > > +	struct {
> > > > +		struct v4l2_ctrl *noise_reduction_auto;
> > > > +		struct v4l2_ctrl *noise_reduction_absolute;
> > > > +	};
> > > > +
> > > > +	const char *fw_name;
> > > > +	u8 *fw_data;
> > > > +	size_t fw_size;
> > > > +
> > > > +	u8 fw_major_version;
> > > > +	u8 fw_minor_version;
> > > > +
> > > > +	/* Lock to protect fw_cancel */
> > > > +	struct mutex fw_lock;
> > > > +	struct fw_upload *fwl;
> > > > +	bool fw_cancel;
> > > 
> > > Arranging this right after fw_* would save some memory.
> > 
> > After what ? I assume you mean fw_*_version ? It would, but it would
> > feel a bit out of place. I'll see what I can do.
> 
> Yes. There doesn't seem to be any firm ordering here either. Up to you.
> 
> ...
> 
> > > > +	val = ((conv_lanes[3] & 0x03) << 6) |
> > > > +	      ((conv_lanes[2] & 0x03) << 4) |
> > > > +	      ((conv_lanes[1] & 0x03) << 2) |
> > > > +	       (conv_lanes[0] & 0x03);
> > > 
> > > You could construct val in the loop and drop conv_lanes altogether.
> > > 
> > > I.e.
> > > 
> > > 		val |= (i & 0x03) << ((lanes[i] - 1) * 2);
> > > 
> > > And assign val to 0 in declaration.
> > 
> > I think I'll compute it at probe time and cache it instead.
> 
> If you don't need anything else in the endpoint, you could move it out of
> the device context struct.

That's what I've now done, yes.

> > > > +	for (rate = mode->rates; rate->fps; ++rate, --index) {
> > > > +		if (!index) {
> > > > +			fie->interval.numerator = 1;
> > > > +			fie->interval.denominator = rate->fps;
> > > 
> > > Maybe a newline here?
> > 
> > If that makes you happy :-)
> 
> Newlines are great (when they are at the right places)!
> 
> > > > +	case V4L2_CID_THP7312_NOISE_REDUCTION_AUTO:
> > > > +	case V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE:
> > > > +		/* Ignore the manually set value if auto has been set */
> > > > +		value = thp7312->noise_reduction_auto->val
> > > > +		      ? 0 : 0x80 | (thp7312->noise_reduction_absolute->val & 0x7f);
> > > 
> > > "?" should be on the preceding line.
> > 
> > Isn't that a matter of coding style preference ?
> 
> Yes, indeed, and I recall GNU coding style is shunned upon here. :-)
> 
> > > > +
> > > > +		cci_write(thp7312->regmap, THP7312_REG_NOISE_REDUCTION, value,
> > > > +			  &ret);
> > > > +		break;
> > > > +
> > > > +	case V4L2_CID_AUTO_WHITE_BALANCE:
> > > > +		value = ctrl->val ? THP7312_WB_MODE_AUTO : THP7312_WB_MODE_MANUAL;
> > > 
> > > I'd do this in the call, up to you.
> > 
> > Only if you allow lines longer than 80 columns ;-)
> 
> I don't think you need longer lines for that, do you?
> 
> > > > +
> > > > +		cci_write(thp7312->regmap, THP7312_REG_WB_MODE, value, &ret);
> > > > +		break;
> > > > +
> 
> ...
> 
> > > > +static enum fw_upload_err thp7312_fw_write_to_flash(struct thp7312_device *thp7312,
> > > > +						    u32 dest, u32 write_size)
> > > > +{
> > > > +	u8 command[sizeof(thp7312_cmd_write_ram_to_flash) + 6];
> > > > +	static const u32 cmd_size = sizeof(thp7312_cmd_write_ram_to_flash);
> > > > +	u64 val;
> > > > +	int ret;
> > > > +
> > > > +	memcpy(command, thp7312_cmd_write_ram_to_flash, cmd_size);
> > > > +
> > > > +	command[cmd_size] = (dest & 0xff0000) >> 16;
> > > > +	command[cmd_size + 1] = (dest & 0x00ff00) >> 8;
> > > > +	command[cmd_size + 2] = (dest & 0x0000ff);
> > > > +	command[cmd_size + 3] = ((write_size - 1) & 0xff0000) >> 16;
> > > > +	command[cmd_size + 4] = ((write_size - 1) & 0x00ff00) >> 8;
> > > > +	command[cmd_size + 5] = ((write_size - 1) & 0x0000ff);
> > > > +
> > > > +	ret = thp7312_write_buf(thp7312, command, sizeof(command));
> > > > +	if (ret < 0)
> > > > +		return FW_UPLOAD_ERR_RW_ERROR;
> > > > +
> > > > +	usleep_range(8000000, 8100000);
> > > 
> > > I guess there's time to make some tea here?
> > 
> > For a flash infusion, gong fu style, probably.
> > 
> > We don't have much documentation about the exact values of the delays
> > that are needed, and why :-(
> 
> I have even less documentation (none) on this device. Is polling an option,
> as you're reading a register to verify the operation was successful?

I'll try to ask and get more information. As firmware update is an
uncommon and not time-sensitive operation, I'd rather be cautious here
and not over-optimize.

> > > > +
> > > > +	ret = cci_read(thp7312->regmap, THP7312_REG_FW_VERIFY_RESULT, &val,
> > > > +		       NULL);
> > > > +	if (ret < 0)
> > > > +		return FW_UPLOAD_ERR_RW_ERROR;
> > > > +
> > > > +	return val ?  FW_UPLOAD_ERR_HW_ERROR : FW_UPLOAD_ERR_NONE;
> > > > +}
> 
> ...
> 
> > > > +	/*
> > > > +	 * Register a device for the sensor, to support usage of the regulator
> > > > +	 * API.
> > > > +	 */
> > > > +	sensor->dev = kzalloc(sizeof(*sensor->dev), GFP_KERNEL);
> > > > +	if (!sensor->dev)
> > > > +		return -ENOMEM;
> > > > +
> > > > +	sensor->dev->parent = dev;
> > > > +	sensor->dev->of_node = of_node_get(sensor->of_node);
> > > 
> > > This device could well find its way to a non-OF system. Could you use the
> > > fwnode property API instead?
> > 
> > I'm pretty sure there will be problems if someone was using this driver
> > on an ACPI-based system, so trying to pretend it's supported without
> > being able to test it may not be the best use of development time. I'll
> > try, but if I hit any issue, I'll keep using the OF-specific functions
> > in the next version.
> 
> I'd suggest to use OF functions if there's no corresponding fwnode function
> available. The intention is they cover the same scope, so it is likely
> something that's missing will be added sooner or later.

I understand, but if the conversion is not complete, it's not very
valuable. I have no objection against using the fwnode API in the
driver, but I'll let someone else handle it when and if needed.

> > > > +	/* Retrieve the sensor index from the reg property. */
> > > > +	ret = of_property_read_u32(node, "reg", &reg);
> > > > +	if (ret < 0) {
> > > > +		dev_err(dev, "'reg' property missing in sensor node\n");
> > > 
> > > Shouldn't you assume it's zero instead?
> > 
> > The property is mandatory.
> 
> You could also make it optional as that appears to be the general practice.
> Up to you.

I think it's easier to keep it mandatory.
Sakari Ailus Oct. 30, 2023, 8:09 a.m. UTC | #4
Hi Laurent,

On Sat, Oct 28, 2023 at 06:18:58PM +0300, Laurent Pinchart wrote:
> On Fri, Oct 27, 2023 at 02:50:09PM +0000, Sakari Ailus wrote:
> > Hi Laurent,
> > 
> > On Fri, Oct 27, 2023 at 03:45:29PM +0300, Laurent Pinchart wrote:
> > 
> > ...
> > 
> > > > > +#include <linux/clk.h>
> > > > > +#include <linux/delay.h>
> > > > > +#include <linux/device.h>
> > > > > +#include <linux/firmware.h>
> > > > > +#include <linux/gpio/consumer.h>
> > > > > +#include <linux/i2c.h>
> > > > > +#include <linux/init.h>
> > > > > +#include <linux/iopoll.h>
> > > > > +#include <linux/kernel.h>
> > > > > +#include <linux/module.h>
> > > > > +#include <linux/mtd/spi-nor.h>
> > > > > +#include <linux/of_device.h>
> > > > > +#include <linux/pm_runtime.h>
> > > > > +#include <linux/regulator/consumer.h>
> > > > > +#include <linux/slab.h>
> > > > > +#include <linux/thp7312.h>
> > > > 
> > > > uapi/linux/thp7321.h ?
> > > 
> > > Is that needed ?
> > 
> > It's a UAPI header. Wouldn't it be reasonable to include it that way
> > (instead of relying on searching include/uapi as well)?
> 
> There are some occurences of '#include <uapi/' in drivers/ (I counted
> 338), but why is that better ?

I'd presume that at some point the -Iinclude/uapi will be cleaned up and
then the only option remains to include it from there directly. Why not to
do it already now?

> 
> > > > > +	struct {
> > > > > +		struct v4l2_ctrl *noise_reduction_auto;
> > > > > +		struct v4l2_ctrl *noise_reduction_absolute;
> > > > > +	};
> > > > > +
> > > > > +	const char *fw_name;
> > > > > +	u8 *fw_data;
> > > > > +	size_t fw_size;
> > > > > +
> > > > > +	u8 fw_major_version;
> > > > > +	u8 fw_minor_version;
> > > > > +
> > > > > +	/* Lock to protect fw_cancel */
> > > > > +	struct mutex fw_lock;
> > > > > +	struct fw_upload *fwl;
> > > > > +	bool fw_cancel;
> > > > 
> > > > Arranging this right after fw_* would save some memory.
> > > 
> > > After what ? I assume you mean fw_*_version ? It would, but it would
> > > feel a bit out of place. I'll see what I can do.
> > 
> > Yes. There doesn't seem to be any firm ordering here either. Up to you.
> > 
> > ...
> > 
> > > > > +	val = ((conv_lanes[3] & 0x03) << 6) |
> > > > > +	      ((conv_lanes[2] & 0x03) << 4) |
> > > > > +	      ((conv_lanes[1] & 0x03) << 2) |
> > > > > +	       (conv_lanes[0] & 0x03);
> > > > 
> > > > You could construct val in the loop and drop conv_lanes altogether.
> > > > 
> > > > I.e.
> > > > 
> > > > 		val |= (i & 0x03) << ((lanes[i] - 1) * 2);
> > > > 
> > > > And assign val to 0 in declaration.
> > > 
> > > I think I'll compute it at probe time and cache it instead.
> > 
> > If you don't need anything else in the endpoint, you could move it out of
> > the device context struct.
> 
> That's what I've now done, yes.
> 
> > > > > +	for (rate = mode->rates; rate->fps; ++rate, --index) {
> > > > > +		if (!index) {
> > > > > +			fie->interval.numerator = 1;
> > > > > +			fie->interval.denominator = rate->fps;
> > > > 
> > > > Maybe a newline here?
> > > 
> > > If that makes you happy :-)
> > 
> > Newlines are great (when they are at the right places)!
> > 
> > > > > +	case V4L2_CID_THP7312_NOISE_REDUCTION_AUTO:
> > > > > +	case V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE:
> > > > > +		/* Ignore the manually set value if auto has been set */
> > > > > +		value = thp7312->noise_reduction_auto->val
> > > > > +		      ? 0 : 0x80 | (thp7312->noise_reduction_absolute->val & 0x7f);
> > > > 
> > > > "?" should be on the preceding line.
> > > 
> > > Isn't that a matter of coding style preference ?
> > 
> > Yes, indeed, and I recall GNU coding style is shunned upon here. :-)
> > 
> > > > > +
> > > > > +		cci_write(thp7312->regmap, THP7312_REG_NOISE_REDUCTION, value,
> > > > > +			  &ret);
> > > > > +		break;
> > > > > +
> > > > > +	case V4L2_CID_AUTO_WHITE_BALANCE:
> > > > > +		value = ctrl->val ? THP7312_WB_MODE_AUTO : THP7312_WB_MODE_MANUAL;
> > > > 
> > > > I'd do this in the call, up to you.
> > > 
> > > Only if you allow lines longer than 80 columns ;-)
> > 
> > I don't think you need longer lines for that, do you?
> > 
> > > > > +
> > > > > +		cci_write(thp7312->regmap, THP7312_REG_WB_MODE, value, &ret);
> > > > > +		break;
> > > > > +
> > 
> > ...
> > 
> > > > > +static enum fw_upload_err thp7312_fw_write_to_flash(struct thp7312_device *thp7312,
> > > > > +						    u32 dest, u32 write_size)
> > > > > +{
> > > > > +	u8 command[sizeof(thp7312_cmd_write_ram_to_flash) + 6];
> > > > > +	static const u32 cmd_size = sizeof(thp7312_cmd_write_ram_to_flash);
> > > > > +	u64 val;
> > > > > +	int ret;
> > > > > +
> > > > > +	memcpy(command, thp7312_cmd_write_ram_to_flash, cmd_size);
> > > > > +
> > > > > +	command[cmd_size] = (dest & 0xff0000) >> 16;
> > > > > +	command[cmd_size + 1] = (dest & 0x00ff00) >> 8;
> > > > > +	command[cmd_size + 2] = (dest & 0x0000ff);
> > > > > +	command[cmd_size + 3] = ((write_size - 1) & 0xff0000) >> 16;
> > > > > +	command[cmd_size + 4] = ((write_size - 1) & 0x00ff00) >> 8;
> > > > > +	command[cmd_size + 5] = ((write_size - 1) & 0x0000ff);
> > > > > +
> > > > > +	ret = thp7312_write_buf(thp7312, command, sizeof(command));
> > > > > +	if (ret < 0)
> > > > > +		return FW_UPLOAD_ERR_RW_ERROR;
> > > > > +
> > > > > +	usleep_range(8000000, 8100000);
> > > > 
> > > > I guess there's time to make some tea here?
> > > 
> > > For a flash infusion, gong fu style, probably.
> > > 
> > > We don't have much documentation about the exact values of the delays
> > > that are needed, and why :-(
> > 
> > I have even less documentation (none) on this device. Is polling an option,
> > as you're reading a register to verify the operation was successful?
> 
> I'll try to ask and get more information. As firmware update is an
> uncommon and not time-sensitive operation, I'd rather be cautious here
> and not over-optimize.

If this is only done in order to *upgrade* the firmware, it's certainly not
a concern IMO.

> 
> > > > > +
> > > > > +	ret = cci_read(thp7312->regmap, THP7312_REG_FW_VERIFY_RESULT, &val,
> > > > > +		       NULL);
> > > > > +	if (ret < 0)
> > > > > +		return FW_UPLOAD_ERR_RW_ERROR;
> > > > > +
> > > > > +	return val ?  FW_UPLOAD_ERR_HW_ERROR : FW_UPLOAD_ERR_NONE;
> > > > > +}
> > 
> > ...
> > 
> > > > > +	/*
> > > > > +	 * Register a device for the sensor, to support usage of the regulator
> > > > > +	 * API.
> > > > > +	 */
> > > > > +	sensor->dev = kzalloc(sizeof(*sensor->dev), GFP_KERNEL);
> > > > > +	if (!sensor->dev)
> > > > > +		return -ENOMEM;
> > > > > +
> > > > > +	sensor->dev->parent = dev;
> > > > > +	sensor->dev->of_node = of_node_get(sensor->of_node);
> > > > 
> > > > This device could well find its way to a non-OF system. Could you use the
> > > > fwnode property API instead?
> > > 
> > > I'm pretty sure there will be problems if someone was using this driver
> > > on an ACPI-based system, so trying to pretend it's supported without
> > > being able to test it may not be the best use of development time. I'll
> > > try, but if I hit any issue, I'll keep using the OF-specific functions
> > > in the next version.
> > 
> > I'd suggest to use OF functions if there's no corresponding fwnode function
> > available. The intention is they cover the same scope, so it is likely
> > something that's missing will be added sooner or later.
> 
> I understand, but if the conversion is not complete, it's not very
> valuable. I have no objection against using the fwnode API in the
> driver, but I'll let someone else handle it when and if needed.

If you leave it using OF-only API now in a driver that is not bound to OF
in any way, someone moving it to fwnode later may not be able to test it on
OF, increasing the likelihood something breaks. So use fwnode API where you
can now, and we'll address that one call later on.

> 
> > > > > +	/* Retrieve the sensor index from the reg property. */
> > > > > +	ret = of_property_read_u32(node, "reg", &reg);
> > > > > +	if (ret < 0) {
> > > > > +		dev_err(dev, "'reg' property missing in sensor node\n");
> > > > 
> > > > Shouldn't you assume it's zero instead?
> > > 
> > > The property is mandatory.
> > 
> > You could also make it optional as that appears to be the general practice.
> > Up to you.
> 
> I think it's easier to keep it mandatory.

Ack.
Laurent Pinchart Oct. 30, 2023, 10:42 a.m. UTC | #5
Hi Sakari,

On Mon, Oct 30, 2023 at 08:09:36AM +0000, Sakari Ailus wrote:
> On Sat, Oct 28, 2023 at 06:18:58PM +0300, Laurent Pinchart wrote:
> > On Fri, Oct 27, 2023 at 02:50:09PM +0000, Sakari Ailus wrote:
> > > On Fri, Oct 27, 2023 at 03:45:29PM +0300, Laurent Pinchart wrote:
> > > 
> > > ...
> > > 
> > > > > > +#include <linux/clk.h>
> > > > > > +#include <linux/delay.h>
> > > > > > +#include <linux/device.h>
> > > > > > +#include <linux/firmware.h>
> > > > > > +#include <linux/gpio/consumer.h>
> > > > > > +#include <linux/i2c.h>
> > > > > > +#include <linux/init.h>
> > > > > > +#include <linux/iopoll.h>
> > > > > > +#include <linux/kernel.h>
> > > > > > +#include <linux/module.h>
> > > > > > +#include <linux/mtd/spi-nor.h>
> > > > > > +#include <linux/of_device.h>
> > > > > > +#include <linux/pm_runtime.h>
> > > > > > +#include <linux/regulator/consumer.h>
> > > > > > +#include <linux/slab.h>
> > > > > > +#include <linux/thp7312.h>
> > > > > 
> > > > > uapi/linux/thp7321.h ?
> > > > 
> > > > Is that needed ?
> > > 
> > > It's a UAPI header. Wouldn't it be reasonable to include it that way
> > > (instead of relying on searching include/uapi as well)?
> > 
> > There are some occurences of '#include <uapi/' in drivers/ (I counted
> > 338), but why is that better ?
> 
> I'd presume that at some point the -Iinclude/uapi will be cleaned up and
> then the only option remains to include it from there directly. Why not to
> do it already now?

Will it be ? I've never heard of such a plan, but I may have missed it.
I thought it was a feature meant to stay, and the recommended way to
include headers in the uapi/ directory.

> > > > > > +	struct {
> > > > > > +		struct v4l2_ctrl *noise_reduction_auto;
> > > > > > +		struct v4l2_ctrl *noise_reduction_absolute;
> > > > > > +	};
> > > > > > +
> > > > > > +	const char *fw_name;
> > > > > > +	u8 *fw_data;
> > > > > > +	size_t fw_size;
> > > > > > +
> > > > > > +	u8 fw_major_version;
> > > > > > +	u8 fw_minor_version;
> > > > > > +
> > > > > > +	/* Lock to protect fw_cancel */
> > > > > > +	struct mutex fw_lock;
> > > > > > +	struct fw_upload *fwl;
> > > > > > +	bool fw_cancel;
> > > > > 
> > > > > Arranging this right after fw_* would save some memory.
> > > > 
> > > > After what ? I assume you mean fw_*_version ? It would, but it would
> > > > feel a bit out of place. I'll see what I can do.
> > > 
> > > Yes. There doesn't seem to be any firm ordering here either. Up to you.
> > > 
> > > ...
> > > 
> > > > > > +	val = ((conv_lanes[3] & 0x03) << 6) |
> > > > > > +	      ((conv_lanes[2] & 0x03) << 4) |
> > > > > > +	      ((conv_lanes[1] & 0x03) << 2) |
> > > > > > +	       (conv_lanes[0] & 0x03);
> > > > > 
> > > > > You could construct val in the loop and drop conv_lanes altogether.
> > > > > 
> > > > > I.e.
> > > > > 
> > > > > 		val |= (i & 0x03) << ((lanes[i] - 1) * 2);
> > > > > 
> > > > > And assign val to 0 in declaration.
> > > > 
> > > > I think I'll compute it at probe time and cache it instead.
> > > 
> > > If you don't need anything else in the endpoint, you could move it out of
> > > the device context struct.
> > 
> > That's what I've now done, yes.
> > 
> > > > > > +	for (rate = mode->rates; rate->fps; ++rate, --index) {
> > > > > > +		if (!index) {
> > > > > > +			fie->interval.numerator = 1;
> > > > > > +			fie->interval.denominator = rate->fps;
> > > > > 
> > > > > Maybe a newline here?
> > > > 
> > > > If that makes you happy :-)
> > > 
> > > Newlines are great (when they are at the right places)!
> > > 
> > > > > > +	case V4L2_CID_THP7312_NOISE_REDUCTION_AUTO:
> > > > > > +	case V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE:
> > > > > > +		/* Ignore the manually set value if auto has been set */
> > > > > > +		value = thp7312->noise_reduction_auto->val
> > > > > > +		      ? 0 : 0x80 | (thp7312->noise_reduction_absolute->val & 0x7f);
> > > > > 
> > > > > "?" should be on the preceding line.
> > > > 
> > > > Isn't that a matter of coding style preference ?
> > > 
> > > Yes, indeed, and I recall GNU coding style is shunned upon here. :-)
> > > 
> > > > > > +
> > > > > > +		cci_write(thp7312->regmap, THP7312_REG_NOISE_REDUCTION, value,
> > > > > > +			  &ret);
> > > > > > +		break;
> > > > > > +
> > > > > > +	case V4L2_CID_AUTO_WHITE_BALANCE:
> > > > > > +		value = ctrl->val ? THP7312_WB_MODE_AUTO : THP7312_WB_MODE_MANUAL;
> > > > > 
> > > > > I'd do this in the call, up to you.
> > > > 
> > > > Only if you allow lines longer than 80 columns ;-)
> > > 
> > > I don't think you need longer lines for that, do you?
> > > 
> > > > > > +
> > > > > > +		cci_write(thp7312->regmap, THP7312_REG_WB_MODE, value, &ret);
> > > > > > +		break;
> > > > > > +
> > > 
> > > ...
> > > 
> > > > > > +static enum fw_upload_err thp7312_fw_write_to_flash(struct thp7312_device *thp7312,
> > > > > > +						    u32 dest, u32 write_size)
> > > > > > +{
> > > > > > +	u8 command[sizeof(thp7312_cmd_write_ram_to_flash) + 6];
> > > > > > +	static const u32 cmd_size = sizeof(thp7312_cmd_write_ram_to_flash);
> > > > > > +	u64 val;
> > > > > > +	int ret;
> > > > > > +
> > > > > > +	memcpy(command, thp7312_cmd_write_ram_to_flash, cmd_size);
> > > > > > +
> > > > > > +	command[cmd_size] = (dest & 0xff0000) >> 16;
> > > > > > +	command[cmd_size + 1] = (dest & 0x00ff00) >> 8;
> > > > > > +	command[cmd_size + 2] = (dest & 0x0000ff);
> > > > > > +	command[cmd_size + 3] = ((write_size - 1) & 0xff0000) >> 16;
> > > > > > +	command[cmd_size + 4] = ((write_size - 1) & 0x00ff00) >> 8;
> > > > > > +	command[cmd_size + 5] = ((write_size - 1) & 0x0000ff);
> > > > > > +
> > > > > > +	ret = thp7312_write_buf(thp7312, command, sizeof(command));
> > > > > > +	if (ret < 0)
> > > > > > +		return FW_UPLOAD_ERR_RW_ERROR;
> > > > > > +
> > > > > > +	usleep_range(8000000, 8100000);
> > > > > 
> > > > > I guess there's time to make some tea here?
> > > > 
> > > > For a flash infusion, gong fu style, probably.
> > > > 
> > > > We don't have much documentation about the exact values of the delays
> > > > that are needed, and why :-(
> > > 
> > > I have even less documentation (none) on this device. Is polling an option,
> > > as you're reading a register to verify the operation was successful?
> > 
> > I'll try to ask and get more information. As firmware update is an
> > uncommon and not time-sensitive operation, I'd rather be cautious here
> > and not over-optimize.
> 
> If this is only done in order to *upgrade* the firmware, it's certainly not
> a concern IMO.

Yes, this is about flashing a new firmware to the device, not loading a
firmware at runtime. You need to boot the chip with a pin strapped to
select the firmware upgrade mode.

> > > > > > +
> > > > > > +	ret = cci_read(thp7312->regmap, THP7312_REG_FW_VERIFY_RESULT, &val,
> > > > > > +		       NULL);
> > > > > > +	if (ret < 0)
> > > > > > +		return FW_UPLOAD_ERR_RW_ERROR;
> > > > > > +
> > > > > > +	return val ?  FW_UPLOAD_ERR_HW_ERROR : FW_UPLOAD_ERR_NONE;
> > > > > > +}
> > > 
> > > ...
> > > 
> > > > > > +	/*
> > > > > > +	 * Register a device for the sensor, to support usage of the regulator
> > > > > > +	 * API.
> > > > > > +	 */
> > > > > > +	sensor->dev = kzalloc(sizeof(*sensor->dev), GFP_KERNEL);
> > > > > > +	if (!sensor->dev)
> > > > > > +		return -ENOMEM;
> > > > > > +
> > > > > > +	sensor->dev->parent = dev;
> > > > > > +	sensor->dev->of_node = of_node_get(sensor->of_node);
> > > > > 
> > > > > This device could well find its way to a non-OF system. Could you use the
> > > > > fwnode property API instead?
> > > > 
> > > > I'm pretty sure there will be problems if someone was using this driver
> > > > on an ACPI-based system, so trying to pretend it's supported without
> > > > being able to test it may not be the best use of development time. I'll
> > > > try, but if I hit any issue, I'll keep using the OF-specific functions
> > > > in the next version.
> > > 
> > > I'd suggest to use OF functions if there's no corresponding fwnode function
> > > available. The intention is they cover the same scope, so it is likely
> > > something that's missing will be added sooner or later.
> > 
> > I understand, but if the conversion is not complete, it's not very
> > valuable. I have no objection against using the fwnode API in the
> > driver, but I'll let someone else handle it when and if needed.
> 
> If you leave it using OF-only API now in a driver that is not bound to OF
> in any way, someone moving it to fwnode later may not be able to test it on
> OF, increasing the likelihood something breaks. So use fwnode API where you
> can now, and we'll address that one call later on.

Sorry, this is extra work for very little gain (if any) now, so I don't
plan to do so if I can't implement a full conversion.

> > > > > > +	/* Retrieve the sensor index from the reg property. */
> > > > > > +	ret = of_property_read_u32(node, "reg", &reg);
> > > > > > +	if (ret < 0) {
> > > > > > +		dev_err(dev, "'reg' property missing in sensor node\n");
> > > > > 
> > > > > Shouldn't you assume it's zero instead?
> > > > 
> > > > The property is mandatory.
> > > 
> > > You could also make it optional as that appears to be the general practice.
> > > Up to you.
> > 
> > I think it's easier to keep it mandatory.
> 
> Ack.
Laurent Pinchart Oct. 31, 2023, 2:24 p.m. UTC | #6
On Tue, Oct 31, 2023 at 03:41:25PM +0200, Andy Shevchenko wrote:
> On Tue, Oct 31, 2023 at 10:45:32AM +0000, Sakari Ailus wrote:
> > On Mon, Oct 30, 2023 at 12:42:41PM +0200, Laurent Pinchart wrote:
> > > On Mon, Oct 30, 2023 at 08:09:36AM +0000, Sakari Ailus wrote:
> > > > On Sat, Oct 28, 2023 at 06:18:58PM +0300, Laurent Pinchart wrote:
> > > > > On Fri, Oct 27, 2023 at 02:50:09PM +0000, Sakari Ailus wrote:
> > > > > > On Fri, Oct 27, 2023 at 03:45:29PM +0300, Laurent Pinchart wrote:
> 
> ...
> 
> > > > > > > > > +#include <linux/of_device.h>
> 
> I believe this shouldn't (mustn't?) be used in a new code.
> Rob have been doing a big job of replacing some OF-specific
> APIs by generic ones.
> 
> ...
> 
> > > > > > > > uapi/linux/thp7321.h ?
> 
> Why does the driver even have that?! Does it allow direct IOCTLs? Some
> other hardware information that should be supplied via "abstract"
> (presumably existing IOCTL)?

Custome V4L2 controls.

> ...
> 
> > > > > > > > > +	sensor->dev->parent = dev;
> > > > > > > > > +	sensor->dev->of_node = of_node_get(sensor->of_node);
> 
> This should be device_set_node().
> 
> > > > > > > > This device could well find its way to a non-OF system. Could you use the
> > > > > > > > fwnode property API instead?
> > > > > > > 
> > > > > > > I'm pretty sure there will be problems if someone was using this driver
> > > > > > > on an ACPI-based system, so trying to pretend it's supported without
> > > > > > > being able to test it may not be the best use of development time. I'll
> > > > > > > try, but if I hit any issue, I'll keep using the OF-specific functions
> > > > > > > in the next version.
> 
> Besides ACPI it may be other ways of instantiating the driver.
> And we, in general, asking for creating OF-independent drivers as long
> as there is no strong evidence that the platform itself and the particular
> hardware never ever will have anything than OF. And it almost always
> not true for discrete (outside the SoC) components.

I'm fine making drivers OF-independent even without any clear evidence
that the device will be used on a non-OF platform when doing so does not
incur an unreasonable extra development cost.

> > > > > > I'd suggest to use OF functions if there's no corresponding fwnode function
> > > > > > available. The intention is they cover the same scope, so it is likely
> > > > > > something that's missing will be added sooner or later.
> > > > > 
> > > > > I understand, but if the conversion is not complete, it's not very
> > > > > valuable. I have no objection against using the fwnode API in the
> > > > > driver, but I'll let someone else handle it when and if needed.
> > > > 
> > > > If you leave it using OF-only API now in a driver that is not bound to OF
> > > > in any way, someone moving it to fwnode later may not be able to test it on
> > > > OF, increasing the likelihood something breaks. So use fwnode API where you
> > > > can now, and we'll address that one call later on.
> > > 
> > > Sorry, this is extra work for very little gain (if any) now, so I don't
> > > plan to do so if I can't implement a full conversion.
> > 
> > I don't see why would you leave this for someone else to clean up later.
> > It's called "technical debt". Similarly, we have no ACPI-only sensor
> > drivers that would use ACPI specific functions that would not be available
> > on non-ACPI systems --- they've all used the fwnode API, missing just
> > regulators, clocks and GPIOs.
> 
> I agree with Sakari. Let's reduce the scope of ACPI/OF/etc-specific functions
> in the drivers. There are really little that have no generic counterparts.
> And most of the usages are special cases.

Sakar has submitted a patch to add one missing fwnode function. If it
gets accepted, I'll try it out and see if I can convert this driver. I
will still not do a partial conversion if I hit any other blocker.

> > If you like, I think we could have an fwnode version of the same function,
> > to be used with DT binding compliant format for the device in ACPI DSDT.
> > Plain ACPI would have no need for the function.
Andy Shevchenko Oct. 31, 2023, 4:43 p.m. UTC | #7
On Tue, Oct 31, 2023 at 04:24:59PM +0200, Laurent Pinchart wrote:
> On Tue, Oct 31, 2023 at 03:41:25PM +0200, Andy Shevchenko wrote:
> > On Tue, Oct 31, 2023 at 10:45:32AM +0000, Sakari Ailus wrote:

...

> > I agree with Sakari. Let's reduce the scope of ACPI/OF/etc-specific functions
> > in the drivers. There are really little that have no generic counterparts.
> > And most of the usages are special cases.
> 
> Sakar has submitted a patch to add one missing fwnode function.

I have reviewed it already :-)

> If it gets accepted, I'll try it out and see if I can convert this driver.

I'm sure we can make this happen, but let's see...

> I will still not do a partial conversion if I hit any other blocker.

If any other issues, don't hesitate to report!
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index d2c15c0b22c7..1ba2e15111d6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21455,6 +21455,7 @@  S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
 F:	Documentation/userspace-api/media/drivers/thp7312.rst
+F:	drivers/media/i2c/thp7312.c
 F:	include/uapi/linux/thp7312.h
 
 THUNDERBOLT DMA TRAFFIC TEST DRIVER
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 59ee0ca2c978..aa659bea91b3 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -628,6 +628,22 @@  source "drivers/media/i2c/et8ek8/Kconfig"
 
 endif
 
+menu "Camera ISPs"
+	visible if MEDIA_CAMERA_SUPPORT
+
+config VIDEO_THP7312
+	tristate "THine THP7312 support"
+	depends on I2C
+	select MEDIA_CONTROLLER
+	select V4L2_CCI_I2C
+	select V4L2_FWNODE
+	select VIDEO_V4L2_SUBDEV_API
+	help
+	  This is a Video4Linux2 sensor-level driver for the THine
+	  THP7312 ISP.
+
+endmenu
+
 menu "Lens drivers"
 	visible if MEDIA_CAMERA_SUPPORT
 
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index f5010f80a21f..5e67217ede45 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -128,6 +128,7 @@  obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
 obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
 obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o
 obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o
+obj-$(CONFIG_VIDEO_THP7312) += thp7312.o
 obj-$(CONFIG_VIDEO_THS7303) += ths7303.o
 obj-$(CONFIG_VIDEO_THS8200) += ths8200.o
 obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o
diff --git a/drivers/media/i2c/thp7312.c b/drivers/media/i2c/thp7312.c
new file mode 100644
index 000000000000..7d3de929079d
--- /dev/null
+++ b/drivers/media/i2c/thp7312.c
@@ -0,0 +1,2339 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 THine Electronics, Inc.
+ * Copyright (C) 2023 Ideas on Board Oy
+ */
+
+#include <asm/unaligned.h>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/thp7312.h>
+#include <linux/types.h>
+
+#include <media/v4l2-async.h>
+#include <media/v4l2-cci.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+/* ISP registers */
+
+#define	THP7312_REG_FIRMWARE_VERSION_1			CCI_REG8(0xf000)
+#define THP7312_REG_CAMERA_STATUS			CCI_REG8(0xf001)
+#define	THP7312_REG_FIRMWARE_VERSION_2			CCI_REG8(0xf005)
+#define THP7312_REG_SET_OUTPUT_ENABLE			CCI_REG8(0xf008)
+#define	THP7312_OUTPUT_ENABLE				0x01
+#define	THP7312_OUTPUT_DISABLE				0x00
+#define THP7312_REG_SET_OUTPUT_COLOR_COMPRESSION	CCI_REG8(0xf009)
+#define THP7312_REG_SET_OUTPUT_COLOR_UYVY		0x00
+#define THP7312_REG_SET_OUTPUT_COLOR_YUY2		0x04
+#define	THP7312_REG_FLIP_MIRROR				CCI_REG8(0xf00c)
+#define THP7312_REG_VIDEO_IMAGE_SIZE			CCI_REG8(0xf00d)
+#define THP7312_VIDEO_IMAGE_SIZE_640x360		0x52
+#define THP7312_VIDEO_IMAGE_SIZE_640x460		0x03
+#define THP7312_VIDEO_IMAGE_SIZE_1280x720		0x0a
+#define THP7312_VIDEO_IMAGE_SIZE_1920x1080		0x0b
+#define THP7312_VIDEO_IMAGE_SIZE_3840x2160		0x0d
+#define THP7312_VIDEO_IMAGE_SIZE_4160x3120		0x14
+#define THP7312_VIDEO_IMAGE_SIZE_2016x1512		0x20
+#define THP7312_VIDEO_IMAGE_SIZE_2048x1536		0x21
+#define THP7312_REG_VIDEO_FRAME_RATE_MODE		CCI_REG8(0xf00f)
+#define THP7312_VIDEO_FRAME_RATE_MODE1			0x80
+#define THP7312_VIDEO_FRAME_RATE_MODE2			0x81
+#define THP7312_VIDEO_FRAME_RATE_MODE3			0x82
+#define THP7312_REG_SET_DRIVING_MODE			CCI_REG8(0xf010)
+#define THP7312_REG_DRIVING_MODE_STATUS			CCI_REG8(0xf011)
+#define THP7312_REG_JPEG_COMPRESSION_FACTOR		CCI_REG8(0xf01b)
+#define THP7312_REG_AE_EXPOSURE_COMPENSATION		CCI_REG8(0xf022)
+#define THP7312_REG_AE_FLICKER_MODE			CCI_REG8(0xf023)
+#define THP7312_AE_FLICKER_MODE_50			0x00
+#define THP7312_AE_FLICKER_MODE_60			0x01
+#define THP7312_AE_FLICKER_MODE_DISABLE			0x80
+#define THP7312_REG_AE_FIX_FRAME_RATE			CCI_REG8(0xf02e)
+#define THP7312_REG_MANUAL_WB_RED_GAIN			CCI_REG8(0xf036)
+#define THP7312_REG_MANUAL_WB_BLUE_GAIN			CCI_REG8(0xf037)
+#define THP7312_REG_WB_MODE				CCI_REG8(0xf039)
+#define THP7312_WB_MODE_AUTO				0x00
+#define THP7312_WB_MODE_MANUAL				0x11
+#define	THP7312_REG_MANUAL_FOCUS_POSITION		CCI_REG16(0xf03c)
+#define	THP7312_REG_AF_CONTROL				CCI_REG8(0xf040)
+#define	THP7312_REG_AF_CONTROL_AF			0x01
+#define	THP7312_REG_AF_CONTROL_MANUAL			0x10
+#define	THP7312_REG_AF_CONTROL_LOCK			0x80
+#define THP7312_REG_AF_SETTING				CCI_REG8(0xf041)
+/*
+ * TODO: Bits 4 and 5 seems to select between oneshot and continuous mode, and
+ * bits 6 and 7 to select the focus method. The value for continuous hybrid mode
+ * is an outlier, verify that it is correct.
+ */
+#define THP7312_REG_AF_SETTING_ONESHOT_CONTRAST		0x00
+#define THP7312_REG_AF_SETTING_ONESHOT_PDAF		0x40
+#define THP7312_REG_AF_SETTING_ONESHOT_HYBRID		0x80
+#define THP7312_REG_AF_SETTING_CONTINUOUS_CONTRAST	0x30
+#define THP7312_REG_AF_SETTING_CONTINUOUS_PDAF		0x70
+#define THP7312_REG_AF_SETTING_CONTINUOUS_HYBRID	0xf0
+#define THP7312_REG_SATURATION				CCI_REG8(0xf052)
+#define THP7312_REG_SHARPNESS				CCI_REG8(0xf053)
+#define THP7312_REG_BRIGHTNESS				CCI_REG8(0xf056)
+#define THP7312_REG_CONTRAST				CCI_REG8(0xf057)
+#define THP7312_REG_NOISE_REDUCTION			CCI_REG8(0xf059)
+
+#define TH7312_REG_CUSTOM_MIPI_SET			CCI_REG8(0xf0f6)
+#define TH7312_REG_CUSTOM_MIPI_STATUS			CCI_REG8(0xf0f7)
+#define TH7312_REG_CUSTOM_MIPI_RD			CCI_REG8(0xf0f8)
+#define TH7312_REG_CUSTOM_MIPI_TD			CCI_REG8(0xf0f9)
+
+/*
+ * Firmware update registers. Those use a different address space than the
+ * normal operation ISP registers.
+ */
+
+#define THP7312_REG_FW_DRIVABILITY			CCI_REG32(0xd65c)
+#define THP7312_REG_FW_DEST_BANK_ADDR			CCI_REG32(0xff08)
+#define THP7312_REG_FW_VERIFY_RESULT			CCI_REG8(0xff60)
+#define THP7312_REG_FW_RESET_FLASH			CCI_REG8(0xff61)
+#define THP7312_REG_FW_MEMORY_IO_SETTING		CCI_REG8(0xff62)
+#define THP7312_FW_MEMORY_IO_GPIO0			1
+#define THP7312_FW_MEMORY_IO_GPIO1			0
+#define THP7312_REG_FW_CRC_RESULT			CCI_REG32(0xff64)
+#define THP7312_REG_FW_STATUS				CCI_REG8(0xfffc)
+
+enum thp7312_focus_method {
+	THP7312_FOCUS_METHOD_CONTRAST,
+	THP7312_FOCUS_METHOD_PDAF,
+	THP7312_FOCUS_METHOD_HYBRID,
+};
+
+/*
+ * enum thp7312_focus_state - State of the focus handler
+ *
+ * @THP7312_FOCUS_STATE_MANUAL: Manual focus, controlled through the
+ *	V4L2_CID_FOCUS_ABSOLUTE control
+ * @THP7312_FOCUS_STATE_AUTO: Continuous auto-focus
+ * @THP7312_FOCUS_STATE_LOCKED: Lock the focus to a fixed position. This state
+ *	is entered when switching from auto to manual mode.
+ * @THP7312_FOCUS_STATE_ONESHOT: One-shot auto-focus
+ *
+ * Valid transitions are as follow:
+ *
+ * digraph fsm {
+ *         node [shape=circle];
+ *
+ *         manual [label="MANUAL"];
+ *         auto [label="AUTO"];
+ *         locked [label="LOCKED"];
+ *         oneshot [label="ONESHOT"];
+ *
+ *         manual -> auto [label="FOCUS_AUTO <- true"]
+ *         locked -> auto [label="FOCUS_AUTO <- true"]
+ *         oneshot -> auto [label="FOCUS_AUTO <- true"]
+ *         auto -> locked [label="FOCUS_AUTO <- false"]
+ *
+ *         locked -> manual [label="FOCUS_ABSOLUTE <- *"]
+ *         oneshot -> manual [label="FOCUS_ABSOLUTE <- *"]
+ *
+ *         manual -> oneshot [label="FOCUS_START <- *"]
+ *         locked -> oneshot [label="FOCUS_START <- *"]
+ * }
+ */
+enum thp7312_focus_state {
+	THP7312_FOCUS_STATE_MANUAL,
+	THP7312_FOCUS_STATE_AUTO,
+	THP7312_FOCUS_STATE_LOCKED,
+	THP7312_FOCUS_STATE_ONESHOT,
+};
+
+enum thp7312_boot_mode {
+	THP7312_BOOT_MODE_2WIRE_SLAVE = 0,
+	THP7312_BOOT_MODE_SPI_MASTER = 1,
+};
+
+struct thp7312_frame_rate {
+	u32 fps;
+	u32 pixel_rate;
+	u8 reg_frame_rate_mode;
+};
+
+struct thp7312_mode_info {
+	u32 width;
+	u32 height;
+	u8 reg_image_size;
+	const struct thp7312_frame_rate *rates;
+};
+
+static const u32 thp7312_colour_fmts[] = {
+	MEDIA_BUS_FMT_YUYV8_1X16,
+};
+
+/* regulator supplies */
+static const char * const thp7312_supply_name[] = {
+	"vddcore",
+	"vhtermrx",
+	"vddtx",
+	"vddhost",
+	"vddcmos",
+	"vddgpio-0",
+	"vddgpio-1",
+};
+
+#define THP7312_NUM_SUPPLIES ARRAY_SIZE(thp7312_supply_name)
+
+static const struct thp7312_mode_info thp7312_mode_info_data[] = {
+	{
+		.width = 1920,
+		.height = 1080,
+		.reg_image_size = THP7312_VIDEO_IMAGE_SIZE_1920x1080,
+		.rates = (const struct thp7312_frame_rate[]) {
+			{ 30, 150000000, 0x81 },
+			{ 60, 193750000, 0x82 },
+			{ 0 }
+		},
+	}, {
+		.width = 2048,
+		.height = 1536,
+		.reg_image_size = THP7312_VIDEO_IMAGE_SIZE_2048x1536,
+		.rates = (const struct thp7312_frame_rate[]) {
+			{ 30, 150000000, 0x81 },
+			{ 0 }
+		}
+	}, {
+		.width = 3840,
+		.height = 2160,
+		.reg_image_size = THP7312_VIDEO_IMAGE_SIZE_3840x2160,
+		.rates = (const struct thp7312_frame_rate[]) {
+			{ 30, 300000000, 0x81 },
+			{ 0 }
+		},
+	}, {
+		.width = 4160,
+		.height = 3120,
+		.reg_image_size = THP7312_VIDEO_IMAGE_SIZE_4160x3120,
+		.rates = (const struct thp7312_frame_rate[]) {
+			{ 20, 300000000, 0x81 },
+			{ 0 }
+		},
+	},
+};
+
+#define THP7312_NUM_MODES ARRAY_SIZE(thp7312_mode_info_data)
+
+struct thp7312_device;
+
+struct thp7312_sensor_supply {
+	const char *name;
+	unsigned int post_delay_us;
+};
+
+struct thp7312_sensor_info {
+	const char *model;
+	const char *name;
+	unsigned int i2c_addr;
+	const struct thp7312_sensor_supply *supplies;
+};
+
+struct thp7312_sensor {
+	struct thp7312_device *thp7312;
+	unsigned int index;
+	u8 data_lanes[4];
+
+	struct device_node *of_node;
+	struct device *dev;
+	unsigned int num_supplies;
+	struct regulator_bulk_data *supplies;
+};
+
+struct thp7312_device {
+	struct device *dev;
+	struct regmap *regmap;
+
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+
+	/* DT endpoint info */
+	struct v4l2_fwnode_endpoint ep;
+	struct gpio_desc *reset_gpio;
+	struct regulator_bulk_data supplies[THP7312_NUM_SUPPLIES];
+	struct clk *iclk;
+
+	const struct thp7312_sensor_info *sensor_info;
+	struct thp7312_sensor sensors[1];
+
+	enum thp7312_boot_mode boot_mode;
+
+	struct v4l2_ctrl_handler ctrl_handler;
+
+	/* These are protected by v4l2 active state */
+	const struct thp7312_mode_info *current_mode;
+	const struct thp7312_frame_rate *current_rate;
+
+	struct {
+		struct v4l2_ctrl *focus_auto;
+		struct v4l2_ctrl *focus_absolute;
+		struct v4l2_ctrl *focus_start;
+		struct v4l2_ctrl *focus_method;
+	};
+
+	enum thp7312_focus_state focus_state;
+
+	struct {
+		struct v4l2_ctrl *noise_reduction_auto;
+		struct v4l2_ctrl *noise_reduction_absolute;
+	};
+
+	const char *fw_name;
+	u8 *fw_data;
+	size_t fw_size;
+
+	u8 fw_major_version;
+	u8 fw_minor_version;
+
+	/* Lock to protect fw_cancel */
+	struct mutex fw_lock;
+	struct fw_upload *fwl;
+	bool fw_cancel;
+	u8 *fw_write_buf;
+};
+
+static const struct thp7312_sensor_info thp7312_sensor_info[] = {
+	{
+		.model = "sony,imx258",
+		.name = "imx258",
+		.i2c_addr = 0x0,
+		.supplies = (const struct thp7312_sensor_supply[]) {
+			{ "dovdd", 0 },
+			{ "avdd", 0 },
+			{ "dvdd", 0 },
+			{ NULL, 0 },
+		},
+	},
+};
+
+static inline struct thp7312_device *to_thp7312_dev(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct thp7312_device, sd);
+}
+
+/* -----------------------------------------------------------------------------
+ * Device Access & Configuration
+ */
+
+#define thp7312_read_poll_timeout(dev, addr, val, cond, sleep_us, timeout_us) \
+({ \
+	int __ret, __err; \
+	__ret = read_poll_timeout(cci_read, __err, __err || (cond), sleep_us, \
+				  timeout_us, false, (dev)->regmap, addr, \
+				  &(val), NULL); \
+	__ret ? : __err; \
+})
+
+static int thp7312_set_mipi_regs(struct thp7312_device *thp7312, u32 reg,
+				 u8 *lanes, u8 num_lanes)
+{
+	u8 used_lanes = 0;
+	u8 conv_lanes[4];
+	u8 val;
+	unsigned int i;
+
+	/*
+	 * The value that we write to the register is the index in the
+	 * data-lanes array, so we need to do a conversion. Do this in the same
+	 * pass as validating data-lanes.
+	 */
+	for (i = 0; i < num_lanes; i++) {
+		if (lanes[i] > 4)
+			return -EINVAL;
+
+		if (used_lanes & (1 << lanes[i]))
+			return -EINVAL;
+
+		used_lanes |= 1 << lanes[i];
+
+		/*
+		 * data-lanes is 1-indexed while we'll use 0-indexing for
+		 * writing the register.
+		 */
+		conv_lanes[lanes[i] - 1] = i;
+	}
+
+	val = ((conv_lanes[3] & 0x03) << 6) |
+	      ((conv_lanes[2] & 0x03) << 4) |
+	      ((conv_lanes[1] & 0x03) << 2) |
+	       (conv_lanes[0] & 0x03);
+
+	return cci_write(thp7312->regmap, reg, val, NULL);
+}
+
+static int thp7312_set_mipi_lanes(struct thp7312_device *thp7312)
+{
+	struct device *dev = thp7312->dev;
+	int ret;
+	u64 val;
+
+	ret = thp7312_set_mipi_regs(thp7312, TH7312_REG_CUSTOM_MIPI_RD,
+				    thp7312->sensors[0].data_lanes,
+				    ARRAY_SIZE(thp7312->sensors[0].data_lanes));
+	if (ret < 0) {
+		dev_err(dev, "Failed to set RD MIPI lanes: %d\n", ret);
+		return ret;
+	}
+
+	ret  = thp7312_set_mipi_regs(thp7312, TH7312_REG_CUSTOM_MIPI_TD,
+				     thp7312->ep.bus.mipi_csi2.data_lanes,
+				     thp7312->ep.bus.mipi_csi2.num_data_lanes);
+	if (ret)
+		return ret;
+
+	ret = cci_write(thp7312->regmap, TH7312_REG_CUSTOM_MIPI_SET, 1, NULL);
+	if (ret)
+		return ret;
+
+	ret = thp7312_read_poll_timeout(thp7312, TH7312_REG_CUSTOM_MIPI_STATUS,
+					val, val == 0x00, 100000, 2000000);
+	if (ret) {
+		dev_err(dev, "Failed to poll MIPI lane status: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int thp7312_change_mode(struct thp7312_device *thp7312,
+			       const struct thp7312_mode_info *mode,
+			       const struct thp7312_frame_rate *rate)
+{
+	struct device *dev = thp7312->dev;
+	u64 val = 0;
+	int ret;
+
+	ret = thp7312_read_poll_timeout(thp7312, THP7312_REG_CAMERA_STATUS, val,
+					val == 0x80, 20000, 200000);
+	if (ret < 0) {
+		dev_err(dev, "%s(): failed to poll ISP: %d\n", __func__, ret);
+		return ret;
+	}
+
+	cci_write(thp7312->regmap, THP7312_REG_VIDEO_IMAGE_SIZE,
+		  mode->reg_image_size, &ret);
+	cci_write(thp7312->regmap, THP7312_REG_VIDEO_FRAME_RATE_MODE,
+		  rate->reg_frame_rate_mode, &ret);
+	cci_write(thp7312->regmap, THP7312_REG_JPEG_COMPRESSION_FACTOR, 0x5e,
+		  &ret);
+	cci_write(thp7312->regmap, THP7312_REG_SET_DRIVING_MODE, 0x01, &ret);
+
+	if (ret)
+		return ret;
+
+	ret = thp7312_read_poll_timeout(thp7312, THP7312_REG_DRIVING_MODE_STATUS,
+					val, val == 0x01, 20000, 100000);
+	if (ret < 0) {
+		dev_err(dev, "%s(): failed\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int thp7312_set_framefmt(struct thp7312_device *thp7312,
+				struct v4l2_mbus_framefmt *format)
+{
+	u8 val;
+
+	switch (format->code) {
+	case MEDIA_BUS_FMT_UYVY8_1X16:
+		/* YUV422, UYVY */
+		val = THP7312_REG_SET_OUTPUT_COLOR_UYVY;
+		break;
+	case MEDIA_BUS_FMT_YUYV8_1X16:
+		/* YUV422, YUYV */
+		val = THP7312_REG_SET_OUTPUT_COLOR_YUY2;
+		break;
+	default:
+		/* Should never happen */
+		return -EINVAL;
+	}
+
+	return cci_write(thp7312->regmap,
+			 THP7312_REG_SET_OUTPUT_COLOR_COMPRESSION, val, NULL);
+}
+
+static int thp7312_init_mode(struct thp7312_device *thp7312,
+			     struct v4l2_subdev_state *sd_state)
+{
+	struct v4l2_mbus_framefmt *fmt;
+	int ret;
+
+	fmt = v4l2_subdev_get_pad_format(&thp7312->sd, sd_state, 0);
+
+	ret = thp7312_set_framefmt(thp7312, fmt);
+	if (ret)
+		return ret;
+
+	return thp7312_change_mode(thp7312, thp7312->current_mode,
+				   thp7312->current_rate);
+}
+
+static int thp7312_stream_enable(struct thp7312_device *thp7312, int enable)
+{
+	return cci_write(thp7312->regmap, THP7312_REG_SET_OUTPUT_ENABLE,
+			 enable ? THP7312_OUTPUT_ENABLE : THP7312_OUTPUT_DISABLE,
+			 NULL);
+}
+
+static int thp7312_check_status_stream_mode(struct thp7312_device *thp7312)
+{
+	struct device *dev = thp7312->dev;
+	u64 status = 0;
+	int ret;
+
+	while (status != 0x80) {
+		ret = cci_read(thp7312->regmap, THP7312_REG_CAMERA_STATUS,
+			       &status, NULL);
+		if (ret)
+			return ret;
+
+		if (status == 0x80) {
+			dev_dbg(dev, "Camera initialization done\n");
+			return 0;
+		}
+
+		if (status != 0x00) {
+			dev_err(dev, "Invalid camera status %llx\n", status);
+			return -EINVAL;
+		}
+
+		dev_dbg(dev, "Camera initializing...\n");
+		usleep_range(70000, 80000);
+	}
+
+	return 0;
+}
+
+static void thp7312_reset(struct thp7312_device *thp7312)
+{
+	gpiod_set_value_cansleep(thp7312->reset_gpio, 1);
+	/*
+	 * TODO: Shorten this delay to just above the minimum of 8 clock
+	 * cycles.
+	 */
+	fsleep(10000);
+
+	gpiod_set_value_cansleep(thp7312->reset_gpio, 0);
+	/*
+	 * TODO: The documentation states that the device needs 2ms to
+	 * initialize after reset is deasserted. It then proceeds to load the
+	 * firmware from the flash memory, which takes an unspecified amount of
+	 * time. Check if this delay could be reduced.
+	 */
+	fsleep(300000);
+}
+
+/* -----------------------------------------------------------------------------
+ * Power Management
+ */
+
+static void thp7312_power_off_sensors(struct thp7312_device *thp7312)
+{
+	unsigned int i;
+
+	if (!thp7312->sensor_info->supplies)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(thp7312->sensors); ++i) {
+		struct thp7312_sensor *sensor = &thp7312->sensors[i];
+
+		regulator_bulk_disable(sensor->num_supplies, sensor->supplies);
+	}
+}
+
+static int thp7312_power_off(struct thp7312_device *thp7312)
+{
+	thp7312_power_off_sensors(thp7312);
+	regulator_bulk_disable(THP7312_NUM_SUPPLIES, thp7312->supplies);
+	clk_disable_unprepare(thp7312->iclk);
+
+	return 0;
+}
+
+static int thp7312_power_on_sensors(struct thp7312_device *thp7312)
+{
+	struct thp7312_sensor *sensor;
+	unsigned int i, j;
+	int ret;
+
+	if (!thp7312->sensor_info->supplies)
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(thp7312->sensors); ++i) {
+		sensor = &thp7312->sensors[i];
+		ret = 0;
+
+		for (j = 0; j < sensor->num_supplies; ++j) {
+			unsigned int delay;
+
+			/*
+			 * We can't use regulator_bulk_enable() as it would
+			 * enable all supplies in parallel, breaking the sensor
+			 * power sequencing constraints.
+			 */
+			ret = regulator_enable(sensor->supplies[j].consumer);
+			if (ret < 0) {
+				dev_err(thp7312->dev,
+					"Failed to enable supply %u for sensor %u\n",
+					j, i);
+				goto error;
+			}
+
+			delay = thp7312->sensor_info->supplies[j].post_delay_us;
+			usleep_range(delay, delay + 100);
+		}
+	}
+
+	return 0;
+
+error:
+	for (; j > 0; --j)
+		regulator_disable(sensor->supplies[j - 1].consumer);
+
+	for (; i > 0; --i) {
+		sensor = &thp7312->sensors[i - 1];
+		regulator_bulk_disable(sensor->num_supplies, sensor->supplies);
+	}
+
+	return ret;
+}
+
+static int __thp7312_power_on(struct thp7312_device *thp7312)
+{
+	struct device *dev = thp7312->dev;
+	int ret;
+
+	ret = regulator_bulk_enable(THP7312_NUM_SUPPLIES, thp7312->supplies);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_prepare_enable(thp7312->iclk);
+	if (ret < 0) {
+		dev_err(dev, "clk prepare enable failed\n");
+		regulator_bulk_disable(THP7312_NUM_SUPPLIES, thp7312->supplies);
+		return ret;
+	}
+
+	/*
+	 * We cannot assume that turning off and on again will reset, so do a
+	 * software reset on power up.
+	 */
+	thp7312_reset(thp7312);
+
+	return 0;
+}
+
+static int thp7312_power_on(struct thp7312_device *thp7312)
+{
+	int ret;
+
+	ret = __thp7312_power_on(thp7312);
+	if (ret < 0)
+		return ret;
+
+	ret = thp7312_check_status_stream_mode(thp7312);
+	if (ret < 0)
+		goto error;
+
+	ret = thp7312_power_on_sensors(thp7312);
+	if (ret)
+		goto error;
+
+	return 0;
+
+error:
+	thp7312_power_off(thp7312);
+	return ret;
+}
+
+static int thp7312_pm_runtime_suspend(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
+
+	return thp7312_power_off(thp7312);
+}
+
+static int thp7312_pm_runtime_resume(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
+
+	return thp7312_power_on(thp7312);
+}
+
+static const struct dev_pm_ops thp7312_pm_ops = {
+	SET_RUNTIME_PM_OPS(thp7312_pm_runtime_suspend,
+			   thp7312_pm_runtime_resume, NULL)
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Subdev Operations
+ */
+
+static bool thp7312_find_bus_code(u32 code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(thp7312_colour_fmts); ++i) {
+		if (thp7312_colour_fmts[i] == code)
+			return true;
+	}
+
+	return false;
+}
+
+static const struct thp7312_mode_info *
+thp7312_find_mode(unsigned int width, unsigned int height, bool nearest)
+{
+	const struct thp7312_mode_info *mode;
+
+	mode = v4l2_find_nearest_size(thp7312_mode_info_data,
+				      ARRAY_SIZE(thp7312_mode_info_data),
+				      width, height, width, height);
+
+	if (!nearest && (mode->width != width || mode->height != height))
+		return NULL;
+
+	return mode;
+}
+
+static int thp7312_enum_mbus_code(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_state *sd_state,
+				  struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->index >= ARRAY_SIZE(thp7312_colour_fmts))
+		return -EINVAL;
+
+	code->code = thp7312_colour_fmts[code->index];
+
+	return 0;
+}
+
+static int thp7312_enum_frame_size(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_state *sd_state,
+				   struct v4l2_subdev_frame_size_enum *fse)
+{
+	if (!thp7312_find_bus_code(fse->code))
+		return -EINVAL;
+
+	if (fse->index >= THP7312_NUM_MODES)
+		return -EINVAL;
+
+	fse->min_width = thp7312_mode_info_data[fse->index].width;
+	fse->max_width = fse->min_width;
+	fse->min_height = thp7312_mode_info_data[fse->index].height;
+	fse->max_height = fse->min_height;
+
+	return 0;
+}
+
+static int thp7312_enum_frame_interval(struct v4l2_subdev *sd,
+				       struct v4l2_subdev_state *sd_state,
+				       struct v4l2_subdev_frame_interval_enum *fie)
+{
+	const struct thp7312_frame_rate *rate;
+	const struct thp7312_mode_info *mode;
+	unsigned int index = fie->index;
+
+	if (!thp7312_find_bus_code(fie->code))
+		return -EINVAL;
+
+	mode = thp7312_find_mode(fie->width, fie->height, false);
+	if (!mode)
+		return -EINVAL;
+
+	for (rate = mode->rates; rate->fps; ++rate, --index) {
+		if (!index) {
+			fie->interval.numerator = 1;
+			fie->interval.denominator = rate->fps;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int thp7312_set_fmt(struct v4l2_subdev *sd,
+			   struct v4l2_subdev_state *sd_state,
+			   struct v4l2_subdev_format *format)
+{
+	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
+	struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
+	struct v4l2_mbus_framefmt *fmt;
+	const struct thp7312_mode_info *mode;
+
+	if (!thp7312_find_bus_code(mbus_fmt->code))
+		mbus_fmt->code = thp7312_colour_fmts[0];
+
+	mode = thp7312_find_mode(mbus_fmt->width, mbus_fmt->height, true);
+
+	fmt = v4l2_subdev_get_pad_format(&thp7312->sd, sd_state, 0);
+
+	fmt->code = mbus_fmt->code;
+	fmt->width = mode->width;
+	fmt->height = mode->height;
+	fmt->colorspace = V4L2_COLORSPACE_SRGB;
+	fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
+	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
+	fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
+
+	*mbus_fmt = *fmt;
+
+	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		thp7312->current_mode = mode;
+		thp7312->current_rate = &mode->rates[0];
+	}
+
+	return 0;
+}
+
+static int thp7312_g_frame_interval(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_frame_interval *fi)
+{
+	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
+	struct v4l2_subdev_state *sd_state;
+
+	sd_state = v4l2_subdev_lock_and_get_active_state(sd);
+	fi->interval.numerator = 1;
+	fi->interval.denominator = thp7312->current_rate->fps;
+	v4l2_subdev_unlock_state(sd_state);
+
+	return 0;
+}
+
+static int thp7312_s_frame_interval(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_frame_interval *fi)
+{
+	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
+	const struct thp7312_mode_info *mode;
+	const struct thp7312_frame_rate *best_rate = NULL;
+	const struct thp7312_frame_rate *rate;
+	struct v4l2_subdev_state *sd_state;
+	unsigned int best_delta = UINT_MAX;
+	unsigned int fps;
+
+	/* Avoid divisions by 0, pick the highest frame if the interval is 0. */
+	fps = fi->interval.numerator
+	    ? DIV_ROUND_CLOSEST(fi->interval.denominator, fi->interval.numerator)
+	    : UINT_MAX;
+
+	sd_state = v4l2_subdev_lock_and_get_active_state(sd);
+
+	mode = thp7312->current_mode;
+
+	for (rate = mode->rates; rate->fps && best_delta; ++rate) {
+		unsigned int delta = abs(rate->fps - fps);
+
+		if (delta <= best_delta) {
+			best_delta = delta;
+			best_rate = rate;
+		}
+	}
+
+	thp7312->current_rate = best_rate;
+
+	v4l2_subdev_unlock_state(sd_state);
+
+	fi->interval.numerator = 1;
+	fi->interval.denominator = best_rate->fps;
+
+	return 0;
+}
+
+static int thp7312_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
+	struct v4l2_subdev_state *sd_state;
+	int ret;
+
+	sd_state = v4l2_subdev_lock_and_get_active_state(sd);
+
+	if (!enable) {
+		thp7312_stream_enable(thp7312, enable);
+		pm_runtime_put(thp7312->dev);
+		v4l2_subdev_unlock_state(sd_state);
+		return 0;
+	}
+
+	ret = pm_runtime_resume_and_get(thp7312->dev);
+	if (ret)
+		goto finish_unlock;
+
+	ret = thp7312_set_mipi_lanes(thp7312);
+	if (ret)
+		goto finish_pm;
+
+	ret = thp7312_init_mode(thp7312, sd_state);
+	if (ret)
+		goto finish_pm;
+
+	ret = __v4l2_ctrl_handler_setup(&thp7312->ctrl_handler);
+	if (ret)
+		goto finish_pm;
+
+	ret = thp7312_stream_enable(thp7312, enable);
+	if (ret)
+		goto finish_pm;
+
+	goto finish_unlock;
+
+finish_pm:
+	pm_runtime_put(thp7312->dev);
+finish_unlock:
+	v4l2_subdev_unlock_state(sd_state);
+
+	return ret;
+}
+
+static int thp7312_init_cfg(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_state *sd_state)
+{
+	const struct thp7312_mode_info *default_mode = &thp7312_mode_info_data[0];
+	struct v4l2_mbus_framefmt *fmt;
+
+	fmt = v4l2_subdev_get_pad_format(sd, sd_state, 0);
+
+	/*
+	 * default init sequence initialize thp7312 to
+	 * YUV422 YUYV VGA@30fps
+	 */
+	fmt->code = MEDIA_BUS_FMT_YUYV8_1X16;
+	fmt->colorspace = V4L2_COLORSPACE_SRGB;
+	fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
+	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
+	fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
+	fmt->width = default_mode->width;
+	fmt->height = default_mode->height;
+	fmt->field = V4L2_FIELD_NONE;
+
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops thp7312_core_ops = {
+	.log_status = v4l2_ctrl_subdev_log_status,
+	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_video_ops thp7312_video_ops = {
+	.g_frame_interval = thp7312_g_frame_interval,
+	.s_frame_interval = thp7312_s_frame_interval,
+	.s_stream = thp7312_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops thp7312_pad_ops = {
+	.enum_mbus_code = thp7312_enum_mbus_code,
+	.init_cfg = thp7312_init_cfg,
+	.get_fmt = v4l2_subdev_get_fmt,
+	.set_fmt = thp7312_set_fmt,
+	.enum_frame_size = thp7312_enum_frame_size,
+	.enum_frame_interval = thp7312_enum_frame_interval,
+};
+
+static const struct v4l2_subdev_ops thp7312_subdev_ops = {
+	.core = &thp7312_core_ops,
+	.video = &thp7312_video_ops,
+	.pad = &thp7312_pad_ops,
+};
+
+/* -----------------------------------------------------------------------------
+ * V4L2 Control Operations
+ */
+
+static inline struct thp7312_device *to_thp7312_from_ctrl(struct v4l2_ctrl *ctrl)
+{
+	return container_of(ctrl->handler, struct thp7312_device, ctrl_handler);
+}
+
+/* 0: 3000cm, 18: 8cm */
+static const u16 thp7312_focus_values[] = {
+	3000, 1000, 600, 450, 350,
+	290,  240,  200, 170, 150,
+	140,  130,  120, 110, 100,
+	93,   87,   83,  80,
+};
+
+static int thp7312_set_focus(struct thp7312_device *thp7312)
+{
+	enum thp7312_focus_state new_state;
+	bool continuous;
+	u8 af_control;
+	u8 af_setting;
+	int ret = 0;
+
+	/* Start by programming the manual focus position if it has changed. */
+	if (thp7312->focus_absolute->is_new) {
+		unsigned int value;
+
+		value = thp7312_focus_values[thp7312->focus_absolute->val];
+
+		ret = cci_write(thp7312->regmap,
+				THP7312_REG_MANUAL_FOCUS_POSITION, value, NULL);
+		if (ret)
+			return ret;
+	}
+
+	/* Calculate the new focus state. */
+	switch (thp7312->focus_state) {
+	case THP7312_FOCUS_STATE_MANUAL:
+	default:
+		if (thp7312->focus_auto->val)
+			new_state = THP7312_FOCUS_STATE_AUTO;
+		else if (thp7312->focus_start->is_new)
+			new_state = THP7312_FOCUS_STATE_ONESHOT;
+		break;
+
+	case THP7312_FOCUS_STATE_AUTO:
+		if (!thp7312->focus_auto->val)
+			new_state = THP7312_FOCUS_STATE_LOCKED;
+		break;
+
+	case THP7312_FOCUS_STATE_LOCKED:
+		if (thp7312->focus_auto->val)
+			new_state = THP7312_FOCUS_STATE_AUTO;
+		else if (thp7312->focus_start->is_new)
+			new_state = THP7312_FOCUS_STATE_ONESHOT;
+		else if (thp7312->focus_absolute->is_new)
+			new_state = THP7312_FOCUS_STATE_MANUAL;
+		break;
+
+	case THP7312_FOCUS_STATE_ONESHOT:
+		if (thp7312->focus_auto->val)
+			new_state = THP7312_FOCUS_STATE_AUTO;
+		else if (thp7312->focus_start->is_new)
+			new_state = THP7312_FOCUS_STATE_ONESHOT;
+		else if (thp7312->focus_absolute->is_new)
+			new_state = THP7312_FOCUS_STATE_MANUAL;
+		break;
+	}
+
+	/*
+	 * If neither the state nor the focus method has changed, and no new
+	 * one-shot focus is requested, there's nothing new to program to the
+	 * hardware.
+	 */
+	if (thp7312->focus_state == new_state &&
+	    !thp7312->focus_method->is_new && !thp7312->focus_start->is_new)
+		return 0;
+
+	continuous = new_state == THP7312_FOCUS_STATE_MANUAL ||
+		     new_state == THP7312_FOCUS_STATE_ONESHOT;
+
+	switch (thp7312->focus_method->val) {
+	case THP7312_FOCUS_METHOD_CONTRAST:
+	default:
+		af_setting = continuous
+			   ? THP7312_REG_AF_SETTING_CONTINUOUS_CONTRAST
+			   : THP7312_REG_AF_SETTING_ONESHOT_CONTRAST;
+		break;
+	case THP7312_FOCUS_METHOD_PDAF:
+		af_setting = continuous
+			   ? THP7312_REG_AF_SETTING_CONTINUOUS_PDAF
+			   : THP7312_REG_AF_SETTING_ONESHOT_PDAF;
+		break;
+	case THP7312_FOCUS_METHOD_HYBRID:
+		af_setting = continuous
+			   ? THP7312_REG_AF_SETTING_CONTINUOUS_HYBRID
+			   : THP7312_REG_AF_SETTING_ONESHOT_HYBRID;
+		break;
+	}
+
+	switch (new_state) {
+	case THP7312_FOCUS_STATE_MANUAL:
+	default:
+		af_control = THP7312_REG_AF_CONTROL_MANUAL;
+		break;
+	case THP7312_FOCUS_STATE_AUTO:
+	case THP7312_FOCUS_STATE_ONESHOT:
+		af_control = THP7312_REG_AF_CONTROL_AF;
+		break;
+	case THP7312_FOCUS_STATE_LOCKED:
+		af_control = THP7312_REG_AF_CONTROL_LOCK;
+		break;
+	}
+
+	cci_write(thp7312->regmap, THP7312_REG_AF_SETTING, af_setting, &ret);
+
+	if (new_state == THP7312_FOCUS_STATE_MANUAL &&
+	    (thp7312->focus_state == THP7312_FOCUS_STATE_AUTO ||
+	     thp7312->focus_state == THP7312_FOCUS_STATE_ONESHOT)) {
+		/* When switching to manual state, lock AF first. */
+		cci_write(thp7312->regmap, THP7312_REG_AF_CONTROL,
+			  THP7312_REG_AF_CONTROL_LOCK, &ret);
+	}
+
+	cci_write(thp7312->regmap, THP7312_REG_AF_CONTROL, af_control, &ret);
+
+	if (ret)
+		return ret;
+
+	thp7312->focus_state = new_state;
+
+	return 0;
+}
+
+static int thp7312_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct thp7312_device *thp7312 = to_thp7312_from_ctrl(ctrl);
+	struct device *dev = thp7312->dev;
+	int ret = 0;
+	u8 value;
+
+	if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE)
+		return -EINVAL;
+
+	dev_dbg(dev, "s_ctrl id %s, value %d\n", ctrl->name, ctrl->val);
+
+	if (!pm_runtime_get_if_in_use(dev))
+		return 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		value = clamp_t(int, ctrl->val, -10, 10) + 10;
+		cci_write(thp7312->regmap, THP7312_REG_BRIGHTNESS, value, &ret);
+		break;
+
+	case V4L2_CID_THP7312_LOW_LIGHT_COMPENSATION:
+		/* 0 = Auto adjust frame rate, 1 = Fix frame rate */
+		value = ctrl->val ? 0 : 1;
+		cci_write(thp7312->regmap, THP7312_REG_AE_FIX_FRAME_RATE, value,
+			  &ret);
+		break;
+
+	case V4L2_CID_FOCUS_AUTO:
+	case V4L2_CID_FOCUS_ABSOLUTE:
+	case V4L2_CID_AUTO_FOCUS_START:
+	case V4L2_CID_THP7312_AUTO_FOCUS_METHOD:
+		ret = thp7312_set_focus(thp7312);
+		break;
+
+	case V4L2_CID_ROTATE:
+		if (ctrl->val == 0)
+			value = 0; /* 0 degree. camera is set to normal.*/
+		else
+			value = 3; /* 180 degree. camera is set to flip & mirror */
+
+		cci_write(thp7312->regmap, THP7312_REG_FLIP_MIRROR, value, &ret);
+		break;
+
+	case V4L2_CID_THP7312_NOISE_REDUCTION_AUTO:
+	case V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE:
+		/* Ignore the manually set value if auto has been set */
+		value = thp7312->noise_reduction_auto->val
+		      ? 0 : 0x80 | (thp7312->noise_reduction_absolute->val & 0x7f);
+
+		cci_write(thp7312->regmap, THP7312_REG_NOISE_REDUCTION, value,
+			  &ret);
+		break;
+
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+		value = ctrl->val ? THP7312_WB_MODE_AUTO : THP7312_WB_MODE_MANUAL;
+
+		cci_write(thp7312->regmap, THP7312_REG_WB_MODE, value, &ret);
+		break;
+
+	case V4L2_CID_RED_BALANCE:
+		cci_write(thp7312->regmap, THP7312_REG_MANUAL_WB_RED_GAIN,
+			  ctrl->val, &ret);
+		break;
+
+	case V4L2_CID_BLUE_BALANCE:
+		cci_write(thp7312->regmap, THP7312_REG_MANUAL_WB_BLUE_GAIN,
+			  ctrl->val, &ret);
+		break;
+
+	case V4L2_CID_AUTO_EXPOSURE_BIAS:
+		cci_write(thp7312->regmap, THP7312_REG_AE_EXPOSURE_COMPENSATION,
+			  ctrl->val, &ret);
+		break;
+
+	case V4L2_CID_POWER_LINE_FREQUENCY:
+		if (ctrl->val == V4L2_CID_POWER_LINE_FREQUENCY_60HZ) {
+			value = THP7312_AE_FLICKER_MODE_60;
+		} else if (ctrl->val == V4L2_CID_POWER_LINE_FREQUENCY_50HZ) {
+			value = THP7312_AE_FLICKER_MODE_50;
+		} else {
+			if (thp7312->fw_major_version == 40 && thp7312->fw_minor_version == 03) {
+				/* THP7312_AE_FLICKER_MODE_DISABLE is not supported */
+				value = THP7312_AE_FLICKER_MODE_50;
+			} else {
+				value = THP7312_AE_FLICKER_MODE_DISABLE;
+			}
+		}
+
+		cci_write(thp7312->regmap, THP7312_REG_AE_FLICKER_MODE,
+			  value, &ret);
+		break;
+
+	case V4L2_CID_SATURATION:
+		cci_write(thp7312->regmap, THP7312_REG_SATURATION,
+			  ctrl->val, &ret);
+		break;
+
+	case V4L2_CID_CONTRAST:
+		cci_write(thp7312->regmap, THP7312_REG_CONTRAST,
+			  ctrl->val, &ret);
+		break;
+
+	case V4L2_CID_SHARPNESS:
+		cci_write(thp7312->regmap, THP7312_REG_SHARPNESS,
+			  ctrl->val, &ret);
+		break;
+
+	default:
+		break;
+	}
+
+	pm_runtime_put(dev);
+
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops thp7312_ctrl_ops = {
+	.s_ctrl = thp7312_s_ctrl,
+};
+
+/*
+ * Refer to Documentation/userspace-api/media/drivers/thp7312.rst for details.
+ *
+ * TODO: Do we actually need this control, or could we hardcode the method to
+ * contrast-based when the sensor doesn't support PDAF (as it would be the only
+ * option in that case), and hybrid mode otherwise ?
+ */
+static const struct v4l2_ctrl_config thp7312_ctrl_focus_method = {
+	.ops = &thp7312_ctrl_ops,
+	.id = V4L2_CID_THP7312_AUTO_FOCUS_METHOD,
+	.name = "Auto-Focus Method",
+	.type = V4L2_CTRL_TYPE_INTEGER,
+	.min = 0,
+	.def = 2,
+	.max = 2,
+	.step = 1,
+};
+
+static const struct v4l2_ctrl_config thp7312_v4l2_ctrls_custom[] = {
+	{
+		.ops = &thp7312_ctrl_ops,
+		.id = V4L2_CID_THP7312_LOW_LIGHT_COMPENSATION,
+		.name = "Low Light Compensation",
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.min = 0,
+		.def = 1,
+		.max = 1,
+		.step = 1,
+	}, {
+		.ops = &thp7312_ctrl_ops,
+		.id = V4L2_CID_THP7312_NOISE_REDUCTION_AUTO,
+		.name = "Noise Reduction Auto",
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.min = 0,
+		.def = 1,
+		.max = 1,
+		.step = 1,
+	}, {
+		.ops = &thp7312_ctrl_ops,
+		.id = V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE,
+		.name = "Noise Reduction Level",
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.min = 0,
+		.def = 0,
+		.max = 10,
+		.step = 1,
+	},
+};
+
+static const s64 exp_bias_qmenu[] = {
+	-2000, -1667, -1333, -1000, -667, -333, 0, 333, 667, 1000, 1333, 1667, 2000
+};
+
+static int thp7312_init_controls(struct thp7312_device *thp7312)
+{
+	struct v4l2_ctrl_handler *hdl = &thp7312->ctrl_handler;
+	struct device *dev = thp7312->dev;
+	struct v4l2_fwnode_device_properties props;
+	unsigned int i;
+	int ret;
+
+	thp7312->focus_state = THP7312_FOCUS_STATE_MANUAL;
+
+	v4l2_ctrl_handler_init(hdl, 16 + ARRAY_SIZE(thp7312_v4l2_ctrls_custom));
+
+	/*
+	 * TODO: Don't expose focus controls if the sensor module doesn't have
+	 * focus support.
+	 */
+	thp7312->focus_auto = v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops,
+						V4L2_CID_FOCUS_AUTO,
+						0, 1, 1, 1);
+	thp7312->focus_absolute =
+		v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_FOCUS_ABSOLUTE,
+				  0, ARRAY_SIZE(thp7312_focus_values), 1, 0);
+	thp7312->focus_method =
+		v4l2_ctrl_new_custom(hdl, &thp7312_ctrl_focus_method, NULL);
+
+	thp7312->focus_start = v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops,
+						 V4L2_CID_AUTO_FOCUS_START,
+						 1, 1, 1, 1);
+
+	v4l2_ctrl_cluster(4, &thp7312->focus_auto);
+
+	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_AUTO_WHITE_BALANCE,
+			  0, 1, 1, 1);
+	/* 32: 1x, 255: 7.95x */
+	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_RED_BALANCE,
+			  32, 255, 1, 64);
+	/* 32: 1x, 255: 7.95x */
+	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_BLUE_BALANCE,
+			  32, 255, 1, 50);
+
+	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_BRIGHTNESS,
+			  -10, 10, 1, 0);
+	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_SATURATION,
+			  0, 31, 1, 10);
+	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_CONTRAST,
+			  0, 20, 1, 10);
+	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_SHARPNESS,
+			  0, 31, 1, 8);
+
+	v4l2_ctrl_new_std(hdl, &thp7312_ctrl_ops, V4L2_CID_ROTATE,
+			  0, 180, 180, 0);
+
+	v4l2_ctrl_new_int_menu(hdl, &thp7312_ctrl_ops,
+			       V4L2_CID_AUTO_EXPOSURE_BIAS,
+			       ARRAY_SIZE(exp_bias_qmenu) - 1,
+			       ARRAY_SIZE(exp_bias_qmenu) / 2, exp_bias_qmenu);
+
+	v4l2_ctrl_new_std_menu(hdl, &thp7312_ctrl_ops,
+			       V4L2_CID_POWER_LINE_FREQUENCY,
+			       V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0,
+			       V4L2_CID_POWER_LINE_FREQUENCY_50HZ);
+
+	/* set properties from fwnode (e.g. rotation, orientation) */
+	ret = v4l2_fwnode_device_parse(dev, &props);
+	if (ret) {
+		dev_err(dev, "Failed to parse fwnode: %d\n", ret);
+		goto error;
+	}
+
+	ret = v4l2_ctrl_new_fwnode_properties(hdl, &thp7312_ctrl_ops, &props);
+	if (ret) {
+		dev_err(dev, "Failed to create new v4l2 ctrl for fwnode properties: %d\n", ret);
+		goto error;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(thp7312_v4l2_ctrls_custom); i++) {
+		const struct v4l2_ctrl_config *ctrl_cfg =
+			&thp7312_v4l2_ctrls_custom[i];
+		struct v4l2_ctrl *ctrl;
+
+		ctrl = v4l2_ctrl_new_custom(hdl, ctrl_cfg, NULL);
+
+		if (ctrl_cfg->id == V4L2_CID_THP7312_NOISE_REDUCTION_AUTO)
+			thp7312->noise_reduction_auto = ctrl;
+		else if (ctrl_cfg->id == V4L2_CID_THP7312_NOISE_REDUCTION_ABSOLUTE)
+			thp7312->noise_reduction_absolute = ctrl;
+	}
+
+	v4l2_ctrl_cluster(2, &thp7312->noise_reduction_auto);
+
+	if (hdl->error) {
+		dev_err(dev, "v4l2_ctrl_handler error\n");
+		ret = hdl->error;
+		goto error;
+	}
+
+	return ret;
+
+error:
+	v4l2_ctrl_handler_free(hdl);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Firmware Update
+ */
+
+/*
+ * The firmware data is made of 128kB of RAM firmware, followed by a
+ * variable-size "header". Both are stored in flash memory.
+ */
+#define THP7312_FW_RAM_SIZE			(128 * 1024)
+#define THP7312_FW_MIN_SIZE			(THP7312_FW_RAM_SIZE + 4)
+#define THP7312_FW_MAX_SIZE			(THP7312_FW_RAM_SIZE + 64 * 1024)
+
+/*
+ * Data is first uploaded to the THP7312 128kB SRAM, and then written to flash.
+ * The SRAM is exposed over I2C as 32kB banks, and up to 4kB of data can be
+ * transferred in a single I2C write.
+ */
+#define THP7312_RAM_BANK_SIZE			(32 * 1024)
+#define THP7312_FW_DOWNLOAD_UNIT		(4 * 1024)
+
+#define THP7312_FLASH_MEMORY_ERASE_TIMEOUT	40
+
+#define THP7312_FLASH_MAX_REG_READ_SIZE		10
+#define THP7312_FLASH_MAX_REG_DATA_SIZE		10
+
+static const u8 thp7312_cmd_config_flash_mem_if[] = {
+	0xd5, 0x18, 0x00, 0x00, 0x00, 0x80
+};
+
+static const u8 thp7312_cmd_write_to_reg[] = {
+	0xd5, 0x0c, 0x80, 0x00, 0x00, 0x00
+};
+
+static const u8 thp7312_cmd_read_reg[] = {
+	0xd5, 0x04
+};
+
+/*
+ * THP7312 Write data from RAM to Flash Memory
+ * Command ID FF700F
+ * Format: FF700F AA AA AA BB BB BB
+ * AA AA AA: destination start address
+ * BB BB BB: (write size - 1)
+ * Source address always starts from 0
+ */
+static const u8 thp7312_cmd_write_ram_to_flash[] = { 0xff, 0x70, 0x0f };
+
+/*
+ * THP7312 Calculate CRC command
+ * Command ID: FF70 09
+ * Format: FF70 09 AA AA AA BB BB BB
+ * AA AA AA: Start address of calculation
+ * BB BB BB: (calculate size - 1)
+ */
+static const u8 thp7312_cmd_calc_crc[] = { 0xff, 0x70, 0x09 };
+
+static const u8 thp7312_jedec_rdid[] = { SPINOR_OP_RDID, 0x00, 0x00, 0x00 };
+static const u8 thp7312_jedec_rdsr[] = { SPINOR_OP_RDSR, 0x00, 0x00, 0x00 };
+static const u8 thp7312_jedec_wen[] = { SPINOR_OP_WREN };
+
+static int thp7312_read_firmware_version(struct thp7312_device *thp7312)
+{
+	u64 val = 0;
+	int ret = 0;
+
+	cci_read(thp7312->regmap, THP7312_REG_FIRMWARE_VERSION_1, &val, &ret);
+	thp7312->fw_major_version = val;
+
+	cci_read(thp7312->regmap, THP7312_REG_FIRMWARE_VERSION_2, &val, &ret);
+	thp7312->fw_minor_version = val;
+
+	return ret;
+}
+
+static int thp7312_write_buf(struct thp7312_device *thp7312,
+			     const u8 *write_buf, u16 write_size)
+{
+	struct i2c_client *client = to_i2c_client(thp7312->dev);
+	int ret;
+
+	ret = i2c_master_send(client, write_buf, write_size);
+	return ret >= 0 ? 0 : ret;
+}
+
+static int __thp7312_flash_reg_write(struct thp7312_device *thp7312,
+				     const u8 *write_buf, u16 write_size)
+{
+	struct device *dev = thp7312->dev;
+	u8 temp_write_buf[THP7312_FLASH_MAX_REG_DATA_SIZE + 2];
+	int ret;
+
+	if (write_size > THP7312_FLASH_MAX_REG_DATA_SIZE) {
+		dev_err(dev, "%s: Write size error size = %d\n",
+			__func__, write_size);
+		return -EINVAL;
+	}
+
+	ret = thp7312_write_buf(thp7312, thp7312_cmd_config_flash_mem_if,
+				sizeof(thp7312_cmd_config_flash_mem_if));
+	if (ret < 0) {
+		dev_err(dev, "%s: Failed to config flash memory IF: %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	temp_write_buf[0] = 0xd5;
+	temp_write_buf[1] = 0x00;
+	memcpy((temp_write_buf + 2), write_buf, write_size);
+	ret = thp7312_write_buf(thp7312, temp_write_buf, write_size + 2);
+	if (ret < 0)
+		return ret;
+
+	thp7312_write_buf(thp7312, thp7312_cmd_write_to_reg,
+			  sizeof(thp7312_cmd_write_to_reg));
+
+	return 0;
+}
+
+static int __thp7312_flash_reg_read(struct thp7312_device *thp7312,
+				    const u8 *write_buf, u16 write_size,
+				    u8 *read_buf, u16 read_size)
+{
+	struct i2c_client *client = to_i2c_client(thp7312->dev);
+	struct i2c_msg msgs[2];
+	int ret;
+
+	ret = __thp7312_flash_reg_write(thp7312, write_buf, write_size);
+	if (ret)
+		return ret;
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = sizeof(thp7312_cmd_read_reg),
+	msgs[0].buf = (u8 *)thp7312_cmd_read_reg;
+
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = read_size;
+	msgs[1].buf = read_buf;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	return ret >= 0 ? 0 : ret;
+}
+
+#define thp7312_flash_reg_write(thp7312, wrbuf) \
+	__thp7312_flash_reg_write(thp7312, wrbuf, sizeof(wrbuf))
+
+#define thp7312_flash_reg_read(thp7312, wrbuf, rdbuf) \
+	__thp7312_flash_reg_read(thp7312, wrbuf, sizeof(wrbuf), \
+				 rdbuf, sizeof(rdbuf))
+
+static enum fw_upload_err thp7312_fw_prepare_config(struct thp7312_device *thp7312)
+{
+	struct device *dev = thp7312->dev;
+	int ret;
+
+	ret = cci_write(thp7312->regmap, THP7312_REG_FW_MEMORY_IO_SETTING,
+			THP7312_FW_MEMORY_IO_GPIO0, NULL);
+	if (ret) {
+		dev_err(dev, "Failed to set flash memory I/O\n");
+		return FW_UPLOAD_ERR_HW_ERROR;
+	}
+
+	/* Set max drivability. */
+	ret = cci_write(thp7312->regmap, THP7312_REG_FW_DRIVABILITY, 0x00777777,
+			NULL);
+	if (ret) {
+		dev_err(dev, "Failed to set drivability: %d\n", ret);
+		return FW_UPLOAD_ERR_HW_ERROR;
+	}
+
+	return FW_UPLOAD_ERR_NONE;
+}
+
+static enum fw_upload_err thp7312_fw_prepare_check(struct thp7312_device *thp7312)
+{
+	struct device *dev = thp7312->dev;
+	u8 read_buf[3] = { 0 };
+	int ret;
+
+	/* Get JEDEC ID */
+	ret = thp7312_flash_reg_read(thp7312, thp7312_jedec_rdid, read_buf);
+	if (ret) {
+		dev_err(dev, "Failed to get JEDEC ID: %d\n", ret);
+		return FW_UPLOAD_ERR_HW_ERROR;
+	}
+
+	dev_dbg(dev, "Flash Memory: JEDEC ID = 0x%x 0x%x 0x%x\n",
+		read_buf[0], read_buf[1], read_buf[2]);
+
+	return FW_UPLOAD_ERR_NONE;
+}
+
+static enum fw_upload_err thp7312_fw_prepare_reset(struct thp7312_device *thp7312)
+{
+	struct device *dev = thp7312->dev;
+	int ret;
+
+	ret = cci_write(thp7312->regmap, THP7312_REG_FW_RESET_FLASH, 0x81, NULL);
+	if (ret) {
+		dev_err(dev, "Failed to reset flash memory: %d\n", ret);
+		return FW_UPLOAD_ERR_HW_ERROR;
+	}
+
+	return FW_UPLOAD_ERR_NONE;
+}
+
+/* TODO: Erase only the amount of blocks necessary */
+static enum fw_upload_err thp7312_flash_erase(struct thp7312_device *thp7312)
+{
+	struct device *dev = thp7312->dev;
+	u8 read_buf[1] = { 0 };
+	unsigned int i;
+	u8 block;
+	int ret;
+
+	for (block = 0; block < 3; block++) {
+		const u8 jedec_se[] = { SPINOR_OP_SE, block, 0x00, 0x00 };
+
+		ret = thp7312_flash_reg_write(thp7312, thp7312_jedec_wen);
+		if (ret < 0) {
+			dev_err(dev, "Failed to enable flash for writing\n");
+			return FW_UPLOAD_ERR_RW_ERROR;
+		}
+
+		ret = thp7312_flash_reg_write(thp7312, jedec_se);
+		if (ret < 0) {
+			dev_err(dev, "Failed to erase flash sector\n");
+			return FW_UPLOAD_ERR_RW_ERROR;
+		}
+
+		for (i = 0; i < THP7312_FLASH_MEMORY_ERASE_TIMEOUT; i++) {
+			usleep_range(100000, 101000);
+			thp7312_flash_reg_read(thp7312, thp7312_jedec_rdsr,
+					       read_buf);
+
+			/* Check Busy bit. Busy == 0x0 means erase complete. */
+			if (!(read_buf[0] & SR_WIP))
+				break;
+		}
+
+		if (i == THP7312_FLASH_MEMORY_ERASE_TIMEOUT)
+			return FW_UPLOAD_ERR_TIMEOUT;
+	}
+
+	thp7312_flash_reg_read(thp7312, thp7312_jedec_rdsr, read_buf);
+
+	/* Check WEL bit. */
+	if (read_buf[0] & SR_WEL)
+		return FW_UPLOAD_ERR_HW_ERROR;
+
+	return FW_UPLOAD_ERR_NONE;
+}
+
+static enum fw_upload_err
+thp7312_write_download_data_by_unit(struct thp7312_device *thp7312,
+				    unsigned int addr, const u8 *data,
+				    unsigned int size)
+{
+	struct device *dev = thp7312->dev;
+	u8 *write_buf = thp7312->fw_write_buf;
+	int ret;
+
+	dev_dbg(dev, "%s: addr = 0x%04x, data = 0x%p, size = %u\n",
+		__func__, addr, data, size);
+
+	write_buf[0] = (addr >> 8) & 0xff;
+	write_buf[1] = (addr >> 0) & 0xff;
+	memcpy(&write_buf[2], data, size);
+
+	/*
+	 * THP7312 Firmware download to RAM
+	 * Command ID (address to download): 0x0000 - 0x7fff
+	 * Format:: 0000 XX XX XX ........ XX
+	 */
+	ret = thp7312_write_buf(thp7312, write_buf, size + 2);
+	if (ret < 0)
+		dev_err(dev, "Unit transfer ERROR %s(): ret = %d\n", __func__, ret);
+
+	return ret >= 0 ? FW_UPLOAD_ERR_NONE : FW_UPLOAD_ERR_RW_ERROR;
+}
+
+static enum fw_upload_err thp7312_fw_load_to_ram(struct thp7312_device *thp7312,
+						 const u8 *data, u32 size)
+{
+	struct device *dev = thp7312->dev;
+	enum fw_upload_err ret;
+	unsigned int num_banks;
+	unsigned int i, j;
+
+	num_banks = DIV_ROUND_UP(size, THP7312_RAM_BANK_SIZE);
+
+	dev_dbg(dev, "%s: loading %u bytes in SRAM (%u banks)\n", __func__,
+		size, num_banks);
+
+	for (i = 0; i < num_banks; i++) {
+		const u32 bank_addr = 0x10000000 | (i * THP7312_RAM_BANK_SIZE);
+		unsigned int bank_size;
+		unsigned int num_chunks;
+
+		ret = cci_write(thp7312->regmap, THP7312_REG_FW_DEST_BANK_ADDR,
+				bank_addr, NULL);
+		if (ret)
+			return FW_UPLOAD_ERR_HW_ERROR;
+
+		bank_size = min_t(u32, size, THP7312_RAM_BANK_SIZE);
+		num_chunks = DIV_ROUND_UP(bank_size, THP7312_FW_DOWNLOAD_UNIT);
+
+		dev_dbg(dev, "%s: loading %u bytes in SRAM bank %u (%u chunks)\n",
+			__func__, bank_size, i, num_chunks);
+
+		for (j = 0 ; j < num_chunks; j++) {
+			unsigned int chunk_addr;
+			unsigned int chunk_size;
+
+			chunk_addr = j * THP7312_FW_DOWNLOAD_UNIT;
+			chunk_size = min_t(u32, size, THP7312_FW_DOWNLOAD_UNIT);
+
+			ret = thp7312_write_download_data_by_unit(thp7312, chunk_addr,
+								  data, chunk_size);
+			if (ret != FW_UPLOAD_ERR_NONE) {
+				dev_err(dev, "Unit transfer ERROR at bank transfer %s(): %d\n",
+					__func__, j);
+				return ret;
+			}
+
+			data += chunk_size;
+			size -= chunk_size;
+		}
+	}
+
+	return FW_UPLOAD_ERR_NONE;
+}
+
+static enum fw_upload_err thp7312_fw_write_to_flash(struct thp7312_device *thp7312,
+						    u32 dest, u32 write_size)
+{
+	u8 command[sizeof(thp7312_cmd_write_ram_to_flash) + 6];
+	static const u32 cmd_size = sizeof(thp7312_cmd_write_ram_to_flash);
+	u64 val;
+	int ret;
+
+	memcpy(command, thp7312_cmd_write_ram_to_flash, cmd_size);
+
+	command[cmd_size] = (dest & 0xff0000) >> 16;
+	command[cmd_size + 1] = (dest & 0x00ff00) >> 8;
+	command[cmd_size + 2] = (dest & 0x0000ff);
+	command[cmd_size + 3] = ((write_size - 1) & 0xff0000) >> 16;
+	command[cmd_size + 4] = ((write_size - 1) & 0x00ff00) >> 8;
+	command[cmd_size + 5] = ((write_size - 1) & 0x0000ff);
+
+	ret = thp7312_write_buf(thp7312, command, sizeof(command));
+	if (ret < 0)
+		return FW_UPLOAD_ERR_RW_ERROR;
+
+	usleep_range(8000000, 8100000);
+
+	ret = cci_read(thp7312->regmap, THP7312_REG_FW_VERIFY_RESULT, &val,
+		       NULL);
+	if (ret < 0)
+		return FW_UPLOAD_ERR_RW_ERROR;
+
+	return val ?  FW_UPLOAD_ERR_HW_ERROR : FW_UPLOAD_ERR_NONE;
+}
+
+static enum fw_upload_err thp7312_fw_check_crc(struct thp7312_device *thp7312,
+					       const u8 *fw_data, u32 fw_size)
+{
+	struct device *dev = thp7312->dev;
+	u16 header_size = fw_size - THP7312_FW_RAM_SIZE;
+	u8 command[sizeof(thp7312_cmd_calc_crc) + 6];
+	static const u32 cmd_size = sizeof(thp7312_cmd_calc_crc);
+	u32 size = THP7312_FW_RAM_SIZE - 4;
+	u32 fw_crc;
+	u64 crc;
+	int ret;
+
+	memcpy(command, thp7312_cmd_calc_crc, cmd_size);
+
+	command[cmd_size] = 0;
+	command[cmd_size + 1] = (header_size >> 8) & 0xff;
+	command[cmd_size + 2] = header_size & 0xff;
+
+	command[cmd_size + 3] = (size >> 16) & 0xff;
+	command[cmd_size + 4] = (size >> 8) & 0xff;
+	command[cmd_size + 5] = size & 0xff;
+
+	ret = thp7312_write_buf(thp7312, command, sizeof(command));
+	if (ret < 0)
+		return FW_UPLOAD_ERR_RW_ERROR;
+
+	usleep_range(2000000, 2100000);
+
+	fw_crc = get_unaligned_be32(&fw_data[fw_size - 4]);
+
+	ret = cci_read(thp7312->regmap, THP7312_REG_FW_CRC_RESULT, &crc, NULL);
+	if (ret < 0)
+		return FW_UPLOAD_ERR_RW_ERROR;
+
+	if (fw_crc != crc) {
+		dev_err(dev, "CRC mismatch: firmware 0x%08x, flash 0x%08llx\n",
+			fw_crc, crc);
+		return FW_UPLOAD_ERR_HW_ERROR;
+	}
+
+	return FW_UPLOAD_ERR_NONE;
+}
+
+static enum fw_upload_err thp7312_fw_prepare(struct fw_upload *fw_upload,
+					     const u8 *data, u32 size)
+{
+	struct thp7312_device *thp7312 = fw_upload->dd_handle;
+	struct device *dev = thp7312->dev;
+	enum fw_upload_err ret;
+
+	mutex_lock(&thp7312->fw_lock);
+	thp7312->fw_cancel = false;
+	mutex_unlock(&thp7312->fw_lock);
+
+	if (size < THP7312_FW_MIN_SIZE || size > THP7312_FW_MAX_SIZE) {
+		dev_err(dev, "%s: Invalid firmware size %d; must be between %d and %d\n",
+			__func__, size, THP7312_FW_MIN_SIZE, THP7312_FW_MAX_SIZE);
+		return FW_UPLOAD_ERR_INVALID_SIZE;
+	}
+
+	ret = thp7312_fw_prepare_config(thp7312);
+	if (ret != FW_UPLOAD_ERR_NONE)
+		return ret;
+
+	ret = thp7312_fw_prepare_check(thp7312);
+	if (ret != FW_UPLOAD_ERR_NONE)
+		return ret;
+
+	ret = thp7312_fw_prepare_reset(thp7312);
+	if (ret != FW_UPLOAD_ERR_NONE)
+		return ret;
+
+	mutex_lock(&thp7312->fw_lock);
+	ret = thp7312->fw_cancel ? FW_UPLOAD_ERR_CANCELED : FW_UPLOAD_ERR_NONE;
+	mutex_unlock(&thp7312->fw_lock);
+
+	return ret;
+}
+
+static enum fw_upload_err thp7312_fw_write(struct fw_upload *fw_upload,
+					   const u8 *data, u32 offset,
+					   u32 size, u32 *written)
+{
+	struct thp7312_device *thp7312 = fw_upload->dd_handle;
+	struct device *dev = thp7312->dev;
+	u16 header_size = size - THP7312_FW_RAM_SIZE;
+	enum fw_upload_err ret;
+
+	mutex_lock(&thp7312->fw_lock);
+	if (thp7312->fw_cancel)
+		return FW_UPLOAD_ERR_CANCELED;
+	mutex_unlock(&thp7312->fw_lock);
+
+	ret = thp7312_flash_erase(thp7312);
+	if (ret != FW_UPLOAD_ERR_NONE)
+		return ret;
+
+	ret = thp7312_fw_load_to_ram(thp7312, data, THP7312_FW_RAM_SIZE);
+	if (ret != FW_UPLOAD_ERR_NONE)
+		return ret;
+
+	ret = thp7312_fw_write_to_flash(thp7312, 0, 0x1ffff);
+	if (ret != FW_UPLOAD_ERR_NONE)
+		return ret;
+
+	ret = thp7312_fw_load_to_ram(thp7312, data + THP7312_FW_RAM_SIZE, header_size);
+	if (ret != FW_UPLOAD_ERR_NONE)
+		return ret;
+
+	ret = thp7312_fw_write_to_flash(thp7312, 0x20000, header_size - 1);
+	if (ret != FW_UPLOAD_ERR_NONE)
+		return ret;
+
+	ret = thp7312_fw_check_crc(thp7312, data, size);
+	if (ret != FW_UPLOAD_ERR_NONE)
+		return ret;
+
+	dev_info(dev, "Successfully wrote firmware\n");
+
+	*written = size;
+	return FW_UPLOAD_ERR_NONE;
+}
+
+static enum fw_upload_err thp7312_fw_poll_complete(struct fw_upload *fw_upload)
+{
+	return FW_UPLOAD_ERR_NONE;
+}
+
+/*
+ * This may be called asynchronously with an on-going update.  All other
+ * functions are called sequentially in a single thread. To avoid contention on
+ * register accesses, only update the cancel_request flag. Other functions will
+ * check this flag and handle the cancel request synchronously.
+ */
+static void thp7312_fw_cancel(struct fw_upload *fw_upload)
+{
+	struct thp7312_device *thp7312 = fw_upload->dd_handle;
+
+	mutex_lock(&thp7312->fw_lock);
+	thp7312->fw_cancel = true;
+	mutex_unlock(&thp7312->fw_lock);
+}
+
+static const struct fw_upload_ops thp7312_fw_upload_ops = {
+	.prepare = thp7312_fw_prepare,
+	.write = thp7312_fw_write,
+	.poll_complete = thp7312_fw_poll_complete,
+	.cancel = thp7312_fw_cancel,
+};
+
+static int thp7312_register_flash_mode(struct thp7312_device *thp7312)
+{
+	struct device *dev = thp7312->dev;
+	struct fw_upload *fwl;
+	u64 val;
+	int ret;
+
+	dev_info(dev, "booted in flash mode\n");
+
+	mutex_init(&thp7312->fw_lock);
+
+	thp7312->fw_write_buf = devm_kzalloc(dev, THP7312_FW_DOWNLOAD_UNIT + 2,
+					     GFP_KERNEL);
+	if (!thp7312->fw_write_buf)
+		return -ENOMEM;
+
+	ret = __thp7312_power_on(thp7312);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to power on\n");
+
+	ret = cci_read(thp7312->regmap, THP7312_REG_FW_STATUS, &val, NULL);
+	if (ret) {
+		dev_err_probe(dev, ret, "Camera status read failed\n");
+		goto error;
+	}
+
+	fwl = firmware_upload_register(THIS_MODULE, dev, "thp7312-firmware",
+				       &thp7312_fw_upload_ops, thp7312);
+	if (IS_ERR(fwl)) {
+		ret = PTR_ERR(fwl);
+		dev_err_probe(dev, ret, "Failed to register firmware upload\n");
+		goto error;
+	}
+
+	thp7312->fwl = fwl;
+	return 0;
+
+error:
+	thp7312_power_off(thp7312);
+	return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * Probe & Remove
+ */
+
+static int thp7312_get_regulators(struct thp7312_device *thp7312)
+{
+	unsigned int i;
+
+	for (i = 0; i < THP7312_NUM_SUPPLIES; i++)
+		thp7312->supplies[i].supply = thp7312_supply_name[i];
+
+	return devm_regulator_bulk_get(thp7312->dev,
+				       THP7312_NUM_SUPPLIES,
+				       thp7312->supplies);
+}
+
+static void thp7312_sensor_dev_release(struct device *dev)
+{
+	of_node_put(dev->of_node);
+	kfree(dev);
+}
+
+static int thp7312_sensor_init(struct thp7312_sensor *sensor, unsigned int index)
+{
+	struct thp7312_device *thp7312 = sensor->thp7312;
+	struct device *dev = thp7312->dev;
+	unsigned int i;
+	int ret;
+
+	sensor->index = index;
+
+	/*
+	 * Register a device for the sensor, to support usage of the regulator
+	 * API.
+	 */
+	sensor->dev = kzalloc(sizeof(*sensor->dev), GFP_KERNEL);
+	if (!sensor->dev)
+		return -ENOMEM;
+
+	sensor->dev->parent = dev;
+	sensor->dev->of_node = of_node_get(sensor->of_node);
+	sensor->dev->release = &thp7312_sensor_dev_release;
+	dev_set_name(sensor->dev, "%s-%s.%u", dev_name(dev),
+		     thp7312->sensor_info->name, index);
+
+	ret = device_register(sensor->dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to register device for sensor %u\n", index);
+		put_device(sensor->dev);
+		sensor->dev = NULL;
+		return ret;
+	}
+
+	/* Retrieve the power supplies for the sensor, if any. */
+	if (thp7312->sensor_info->supplies) {
+		const struct thp7312_sensor_supply *supplies =
+			thp7312->sensor_info->supplies;
+		unsigned int num_supplies;
+
+		for (num_supplies = 0; supplies[num_supplies].name; ++num_supplies)
+			;
+
+		sensor->supplies = devm_kcalloc(dev, num_supplies,
+						sizeof(*sensor->supplies),
+						GFP_KERNEL);
+		if (!sensor->supplies) {
+			ret = -ENOMEM;
+			goto error;
+		}
+
+		for (i = 0; i < num_supplies; ++i)
+			sensor->supplies[i].supply = supplies[i].name;
+
+		ret = regulator_bulk_get(sensor->dev, num_supplies,
+					 sensor->supplies);
+		if (ret < 0) {
+			dev_err(dev, "Failed to get supplies for sensor %u\n", index);
+			goto error;
+		}
+
+		sensor->num_supplies = i;
+	}
+
+	return 0;
+
+error:
+	device_unregister(sensor->dev);
+	return ret;
+}
+
+static int thp7312_init_sensors(struct thp7312_device *thp7312)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < ARRAY_SIZE(thp7312->sensors); i++) {
+		struct thp7312_sensor *sensor = &thp7312->sensors[i];
+
+		if (!sensor->thp7312)
+			continue;
+
+		ret = thp7312_sensor_init(sensor, i);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void thp7312_sensor_cleanup(struct thp7312_sensor *sensor)
+{
+	if (sensor->num_supplies)
+		regulator_bulk_free(sensor->num_supplies, sensor->supplies);
+
+	if (sensor->dev)
+		device_unregister(sensor->dev);
+	of_node_put(sensor->of_node);
+}
+
+static void thp7312_remove_sensors(struct thp7312_device *thp7312)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(thp7312->sensors); i++) {
+		struct thp7312_sensor *sensor = &thp7312->sensors[i];
+
+		if (!sensor->thp7312)
+			continue;
+
+		thp7312_sensor_cleanup(sensor);
+	}
+}
+
+static int thp7312_sensor_parse_dt(struct thp7312_device *thp7312,
+				   struct device_node *node)
+{
+	struct device *dev = thp7312->dev;
+	struct thp7312_sensor *sensor;
+	u32 data_lanes_rx[4];
+	const char *model;
+	unsigned int i;
+	u32 reg;
+	int ret;
+
+	if (!of_device_is_available(node))
+		return -ENODEV;
+
+	/* Retrieve the sensor index from the reg property. */
+	ret = of_property_read_u32(node, "reg", &reg);
+	if (ret < 0) {
+		dev_err(dev, "'reg' property missing in sensor node\n");
+		return -EINVAL;
+	}
+
+	if (reg >= ARRAY_SIZE(thp7312->sensors)) {
+		dev_err(dev, "Out-of-bounds 'reg' value %u\n", reg);
+		return -EINVAL;
+	}
+
+	sensor = &thp7312->sensors[reg];
+	if (sensor->thp7312) {
+		dev_err(dev, "Duplicate entry for sensor %u\n", reg);
+		return -EINVAL;
+	}
+
+	ret = of_property_read_string(node, "thine,model", &model);
+	if (ret < 0) {
+		dev_err(dev, "'thine,model' property missing in sensor node\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(thp7312_sensor_info); i++) {
+		const struct thp7312_sensor_info *info =
+			&thp7312_sensor_info[i];
+
+		if (!strcmp(info->model, model)) {
+			thp7312->sensor_info = info;
+			break;
+		}
+	}
+
+	if (!thp7312->sensor_info) {
+		dev_err(dev, "Unsupported sensor model %s\n", model);
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32_array(node, "data-lanes",
+					 data_lanes_rx, ARRAY_SIZE(data_lanes_rx));
+	if (ret < 0) {
+		dev_err(dev, "Failed to read property data-lanes: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sensor->data_lanes); i++)
+		sensor->data_lanes[i] = (u8)data_lanes_rx[i];
+
+	sensor->thp7312 = thp7312;
+	sensor->of_node = of_node_get(node);
+
+	return 0;
+}
+
+static int thp7312_parse_dt(struct thp7312_device *thp7312)
+{
+	struct device *dev = thp7312->dev;
+	struct fwnode_handle *endpoint;
+	struct device_node *sensors;
+	unsigned int num_sensors = 0;
+	struct device_node *node;
+	int ret;
+
+	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
+	if (!endpoint)
+		return dev_err_probe(dev, -EINVAL, "Endpoint node not found\n");
+
+	ret = v4l2_fwnode_endpoint_parse(endpoint, &thp7312->ep);
+	fwnode_handle_put(endpoint);
+	if (ret)
+		return dev_err_probe(dev, ret, "Could not parse endpoint\n");
+
+	if (thp7312->ep.bus_type != V4L2_MBUS_CSI2_DPHY)
+		return dev_err_probe(dev, -EINVAL, "Unsupported bus type %d\n",
+				     thp7312->ep.bus_type);
+
+	/*
+	 * The thine,boot-mode property is optional and default to
+	 * THP7312_BOOT_MODE_SPI_MASTER (1).
+	 */
+	thp7312->boot_mode = THP7312_BOOT_MODE_SPI_MASTER;
+	ret = of_property_read_u32(dev->of_node, "thine,boot-mode",
+				   &thp7312->boot_mode);
+	if (ret && ret != -EINVAL)
+		return dev_err_probe(dev, ret, "Property '%s' is invalid\n",
+				     "thine,boot-mode");
+
+	if (thp7312->boot_mode != THP7312_BOOT_MODE_2WIRE_SLAVE &&
+	    thp7312->boot_mode != THP7312_BOOT_MODE_SPI_MASTER)
+		return dev_err_probe(dev, -EINVAL, "Invalid '%s' value %u\n",
+				     "thine,boot-mode", thp7312->boot_mode);
+
+	/* Sensors */
+	sensors = of_get_child_by_name(dev->of_node, "sensors");
+	if (!sensors) {
+		dev_err(dev, "'sensors' child node not found\n");
+		return -EINVAL;
+	}
+
+	for_each_child_of_node(sensors, node) {
+		if (of_node_name_eq(node, "sensor")) {
+			if (!thp7312_sensor_parse_dt(thp7312, node))
+				num_sensors++;
+		}
+	}
+
+	of_node_put(sensors);
+
+	if (!num_sensors) {
+		dev_err(dev, "No sensor found\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int thp7312_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct thp7312_device *thp7312;
+	int ret;
+
+	thp7312 = devm_kzalloc(dev, sizeof(*thp7312), GFP_KERNEL);
+	if (!thp7312)
+		return -ENOMEM;
+
+	thp7312->dev = dev;
+
+	thp7312->regmap = devm_cci_regmap_init_i2c(client, 16);
+	if (IS_ERR(thp7312->regmap))
+		return dev_err_probe(dev, PTR_ERR(thp7312->regmap),
+				     "Unable to initialize I2C\n");
+
+	ret = thp7312_parse_dt(thp7312);
+	if (ret < 0)
+		return ret;
+
+	ret = thp7312_get_regulators(thp7312);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	thp7312->iclk = devm_clk_get(dev, NULL);
+	if (IS_ERR(thp7312->iclk))
+		return dev_err_probe(dev, PTR_ERR(thp7312->iclk),
+				     "Failed to get iclk\n");
+
+	thp7312->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(thp7312->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(thp7312->reset_gpio),
+				     "Failed to get reset gpio\n");
+
+	/*
+	 * TODO: Should we confirm that we're in the right boot mode or can we
+	 * trust the dt? Or is it better to check just to protect the user from
+	 * mistakes?
+	 */
+	if (thp7312->boot_mode == THP7312_BOOT_MODE_2WIRE_SLAVE)
+		return thp7312_register_flash_mode(thp7312);
+
+	thp7312->current_mode = &thp7312_mode_info_data[0];
+	thp7312->current_rate = &thp7312->current_mode->rates[0];
+
+	ret = thp7312_init_sensors(thp7312);
+	if (ret < 0)
+		return ret;
+
+	v4l2_i2c_subdev_init(&thp7312->sd, client, &thp7312_subdev_ops);
+	thp7312->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
+	thp7312->pad.flags = MEDIA_PAD_FL_SOURCE;
+	thp7312->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+	ret = media_entity_pads_init(&thp7312->sd.entity, 1, &thp7312->pad);
+	if (ret)
+		return ret;
+
+	ret = thp7312_power_on(thp7312);
+	if (ret)
+		goto entity_cleanup;
+
+	ret = thp7312_read_firmware_version(thp7312);
+	if (ret < 0) {
+		dev_err(dev, "Camera is not found\n");
+		goto power_off;
+	}
+
+	ret = thp7312_init_controls(thp7312);
+	if (ret)
+		goto power_off;
+
+	thp7312->sd.ctrl_handler = &thp7312->ctrl_handler;
+	thp7312->sd.state_lock = thp7312->ctrl_handler.lock;
+
+	ret = v4l2_subdev_init_finalize(&thp7312->sd);
+	if (ret < 0) {
+		dev_err(dev, "Subdev active state initialization failed\n");
+		goto free_ctrls;
+	}
+
+	ret = v4l2_async_register_subdev(&thp7312->sd);
+	if (ret < 0) {
+		dev_err(dev, "Subdev registration failed\n");
+		goto subdev_cleanup;
+	}
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	dev_info(dev, "THP7312 firmware version %02u.%02u\n",
+		 thp7312->fw_major_version, thp7312->fw_minor_version);
+
+	return 0;
+
+subdev_cleanup:
+	v4l2_subdev_cleanup(&thp7312->sd);
+free_ctrls:
+	v4l2_ctrl_handler_free(&thp7312->ctrl_handler);
+power_off:
+	thp7312_power_off(thp7312);
+entity_cleanup:
+	media_entity_cleanup(&thp7312->sd.entity);
+	return ret;
+}
+
+static void thp7312_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct thp7312_device *thp7312 = to_thp7312_dev(sd);
+
+	if (thp7312->boot_mode == THP7312_BOOT_MODE_2WIRE_SLAVE) {
+		firmware_upload_unregister(thp7312->fwl);
+		return;
+	}
+
+	pm_runtime_disable(&client->dev);
+	v4l2_subdev_cleanup(&thp7312->sd);
+	thp7312_remove_sensors(thp7312);
+	v4l2_async_unregister_subdev(&thp7312->sd);
+	v4l2_ctrl_handler_free(&thp7312->ctrl_handler);
+	media_entity_cleanup(&thp7312->sd.entity);
+	v4l2_device_unregister_subdev(sd);
+}
+
+static const struct of_device_id thp7312_dt_ids[] = {
+	{ .compatible = "thine,thp7312" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, thp7312_dt_ids);
+
+static struct i2c_driver thp7312_i2c_driver = {
+	.driver = {
+		.name  = "thp7312",
+		.pm = &thp7312_pm_ops,
+		.of_match_table	= thp7312_dt_ids,
+	},
+	.probe = thp7312_probe,
+	.remove = thp7312_remove,
+};
+
+module_i2c_driver(thp7312_i2c_driver);
+
+MODULE_DESCRIPTION("THP7312 MIPI Camera Subdev Driver");
+MODULE_LICENSE("GPL");