@@ -1208,7 +1208,7 @@ struct lpfc_hba {
uint32_t hbq_in_use; /* HBQs in use flag */
uint32_t hbq_count; /* Count of configured HBQs */
- struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies */
+ struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indices */
atomic_t fcp_qidx; /* next FCP WQ (RR Policy) */
atomic_t nvme_qidx; /* next NVME WQ (RR Policy) */
@@ -3985,7 +3985,7 @@ lpfc_tgt_queue_depth_set(struct lpfc_vport *vport, uint val)
spin_lock_irq(shost->host_lock);
vport->cfg_tgt_queue_depth = val;
- /* Next loop thru nodelist and change cmd_qdepth */
+ /* Next loop through nodelist and change cmd_qdepth */
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp)
ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth;
@@ -2057,7 +2057,7 @@ lpfc_sli4_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct bsg_job *job)
phba->link_flag |= LS_LOOPBACK_MODE;
spin_unlock_irq(&phba->hbalock);
- /* reset port to start frome scratch */
+ /* reset port to start from scratch */
rc = lpfc_selective_reset(phba);
if (rc)
goto job_done;
@@ -2328,7 +2328,7 @@ lpfc_sli4_bsg_diag_mode_end(struct bsg_job *job)
* @job: LPFC_BSG_VENDOR_DIAG_LINK_TEST
*
* This function is to perform SLI4 diag link test request from the user
- * applicaiton.
+ * application.
*/
static int
lpfc_sli4_bsg_link_diag_test(struct bsg_job *job)
@@ -4804,7 +4804,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct bsg_job *job,
} else if (phba->sli_rev == LPFC_SLI_REV4) {
/* Let type 4 (well known data) through because the data is
* returned in varwords[4-8]
- * otherwise check the recieve length and fetch the buffer addr
+ * otherwise check the receive length and fetch the buffer addr
*/
if ((pmb->mbxCommand == MBX_DUMP_MEMORY) &&
(pmb->un.varDmp.type != DMP_WELL_KNOWN)) {
@@ -2356,7 +2356,7 @@ lpfc_cmpl_ct_disc_fdmi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
}
/*
- * On success, need to cycle thru FDMI registration for discovery
+ * On success, need to cycle through FDMI registration for discovery
* DHBA -> DPRT -> RHBA -> RPA (physical port)
* DPRT -> RPRT (vports)
*/
@@ -2468,7 +2468,7 @@ lpfc_fdmi_change_check(struct lpfc_vport *vport)
lpfc_ns_cmd(vport, SLI_CTNS_RSNN_NN, 0, 0);
/* Since this effects multiple HBA and PORT attributes, we need
- * de-register and go thru the whole FDMI registration cycle.
+ * de-register and go through the whole FDMI registration cycle.
* DHBA -> DPRT -> RHBA -> RPA (physical port)
* DPRT -> RPRT (vports)
*/
@@ -3152,7 +3152,7 @@ static int lpfc_idiag_cmd_get(const char __user *buf, size_t nbytes,
memset(mybuf, 0, sizeof(mybuf));
memset(idiag_cmd, 0, sizeof(*idiag_cmd));
bsize = min(nbytes, (sizeof(mybuf)-1));
-
+.
if (copy_from_user(mybuf, buf, bsize))
return -EFAULT;
pbuf = &mybuf[0];
@@ -6655,7 +6655,7 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport)
* lpfc_debug_dump_all_queues - dump all the queues with a hba
* @phba: Pointer to HBA context object.
*
- * This function dumps entries of all the queues asociated with the @phba.
+ * This function dumps entries of all the queues associated with the @phba.
**/
void
lpfc_debug_dump_all_queues(struct lpfc_hba *phba)
@@ -261,13 +261,13 @@ struct lpfc_node_rrq {
* from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated,
* we will first process the ADISC list. 32 entries are processed initially and
* ADISC is initited for each one. Completions / Events for each node are
- * funnelled thru the state machine. As each node finishes ADISC processing, it
+ * funnelled through the state machine. As each node finishes ADISC processing, it
* starts ADISC for any nodes waiting for ADISC processing. If no nodes are
* waiting, and the ADISC list count is identically 0, then we are done. For
* Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we
* can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI
* list. 32 entries are processed initially and PLOGI is initited for each one.
- * Completions / Events for each node are funnelled thru the state machine. As
+ * Completions / Events for each node are funnelled through the state machine. As
* each node finishes PLOGI processing, it starts PLOGI for any nodes waiting
* for PLOGI processing. If no nodes are waiting, and the PLOGI list count is
* identically 0, then we are done. We have now completed discovery / RSCN
@@ -1639,7 +1639,7 @@ lpfc_more_plogi(struct lpfc_vport *vport)
vport->fc_flag, vport->port_state);
/* Check to see if there are more PLOGIs to be sent */
if (vport->fc_flag & FC_NLP_MORE)
- /* go thru NPR nodes and issue any remaining ELS PLOGIs */
+ /* go through NPR nodes and issue any remaining ELS PLOGIs */
lpfc_els_disc_plogi(vport);
return;
@@ -2480,7 +2480,7 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
* If we are in RSCN mode, the FC4 types supported from a
* previous GFT_ID command may not be accurate. So, if we
* are a NVME Initiator, always look for the possibility of
- * the remote NPort beng a NVME Target.
+ * the remote NPort being a NVME Target.
*/
if (phba->sli_rev == LPFC_SLI_REV4 &&
vport->fc_flag & FC_RSCN_MODE &&
@@ -2659,7 +2659,7 @@ lpfc_rscn_disc(struct lpfc_vport *vport)
lpfc_can_disctmo(vport);
/* RSCN discovery */
- /* go thru NPR nodes and issue ELS PLOGIs */
+ /* go through NPR nodes and issue ELS PLOGIs */
if (vport->fc_npr_cnt)
if (lpfc_els_disc_plogi(vport))
return;
@@ -2719,7 +2719,7 @@ lpfc_adisc_done(struct lpfc_vport *vport)
lpfc_issue_clear_la(phba, vport);
if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) {
vport->num_disc_nodes = 0;
- /* go thru NPR list, issue ELS PLOGIs */
+ /* go through NPR list, issue ELS PLOGIs */
if (vport->fc_npr_cnt)
lpfc_els_disc_plogi(vport);
if (!vport->num_disc_nodes) {
@@ -2758,7 +2758,7 @@ lpfc_more_adisc(struct lpfc_vport *vport)
/* Check to see if there are more ADISCs to be sent */
if (vport->fc_flag & FC_NLP_MORE) {
lpfc_set_disctmo(vport);
- /* go thru NPR nodes and issue any remaining ELS ADISCs */
+ /* go through NPR nodes and issue any remaining ELS ADISCs */
lpfc_els_disc_adisc(vport);
}
if (!vport->num_disc_nodes)
@@ -6522,7 +6522,7 @@ lpfc_els_disc_adisc(struct lpfc_vport *vport)
struct lpfc_nodelist *ndlp, *next_ndlp;
int sentadisc = 0;
- /* go thru NPR nodes and issue any remaining ELS ADISCs */
+ /* go through NPR nodes and issue any remaining ELS ADISCs */
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
if (ndlp->nlp_state != NLP_STE_NPR_NODE ||
@@ -6594,7 +6594,7 @@ lpfc_els_disc_plogi(struct lpfc_vport *vport)
struct lpfc_nodelist *ndlp, *next_ndlp;
int sentplogi = 0;
- /* go thru NPR nodes and issue any remaining ELS PLOGIs */
+ /* go through NPR nodes and issue any remaining ELS PLOGIs */
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
if (ndlp->nlp_state == NLP_STE_NPR_NODE &&
(ndlp->nlp_flag & NLP_NPR_2B_DISC) != 0 &&
@@ -9440,7 +9440,7 @@ lpfc_els_rcv_edc(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_els_timeout - Handler funciton to the els timer
+ * lpfc_els_timeout - Handler function to the els timer
* @t: timer context used to obtain the vport.
*
* This routine is invoked by the ELS timer after timeout. It posts the ELS
@@ -3896,7 +3896,7 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
* mbox reg login, we may have cycled
* back through the state and be
* back at reg login state so this
- * mbox needs to be ignored becase
+ * mbox needs to be ignored because
* there is another reg login in
* process.
*/
@@ -3906,7 +3906,7 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
/*
* We cannot leave the RPI registered because
- * if we go thru discovery again for this ndlp
+ * if we go through discovery again for this ndlp
* a subsequent REG_RPI will fail.
*/
ndlp->nlp_flag |= NLP_RPI_REGISTERED;
@@ -4022,7 +4022,7 @@ lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
spin_unlock_irq(shost->host_lock);
vport->num_disc_nodes = 0;
- /* go thru NPR list and issue ELS PLOGIs */
+ /* go through NPR list and issue ELS PLOGIs */
if (vport->fc_npr_cnt)
lpfc_els_disc_plogi(vport);
@@ -5988,7 +5988,7 @@ lpfc_disc_start(struct lpfc_vport *vport)
if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) {
vport->num_disc_nodes = 0;
- /* go thru NPR nodes and issue ELS PLOGIs */
+ /* go through NPR nodes and issue ELS PLOGIs */
if (vport->fc_npr_cnt)
lpfc_els_disc_plogi(vport);
@@ -4117,7 +4117,7 @@ lpfc_sli4_els_sgl_update(struct lpfc_hba *phba)
&phba->sli4_hba.lpfc_els_sgl_list);
spin_unlock_irq(&phba->sli4_hba.sgl_list_lock);
} else if (els_xri_cnt < phba->sli4_hba.els_xri_cnt) {
- /* els xri-sgl shrinked */
+ /* els xri-sgl shrunk */
xri_cnt = phba->sli4_hba.els_xri_cnt - els_xri_cnt;
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"3158 ELS xri-sgl count decreased from "
@@ -10430,7 +10430,7 @@ lpfc_alloc_io_wq_cq(struct lpfc_hba *phba, int idx)
*
* Return codes
* 0 - successful
- * -ENOMEM - No availble memory
+ * -ENOMEM - No available memory
* -EIO - The mailbox failed to complete successfully.
**/
int
@@ -10835,7 +10835,7 @@ lpfc_sli4_release_hdwq(struct lpfc_hba *phba)
hdwq = phba->sli4_hba.hdwq;
- /* Loop thru all Hardware Queues */
+ /* Loop through all Hardware Queues */
for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
/* Free the CQ/WQ corresponding to the Hardware Queue */
lpfc_sli4_queue_free(hdwq[idx].io_cq);
@@ -10847,7 +10847,7 @@ lpfc_sli4_release_hdwq(struct lpfc_hba *phba)
lpfc_free_sgl_per_hdwq(phba, &hdwq[idx]);
lpfc_free_cmd_rsp_buf_per_hdwq(phba, &hdwq[idx]);
}
- /* Loop thru all IRQ vectors */
+ /* Loop through all IRQ vectors */
for (idx = 0; idx < phba->cfg_irq_chann; idx++) {
/* Free the EQ corresponding to the IRQ vector */
eq = phba->sli4_hba.hba_eq_hdl[idx].eq;
@@ -11037,7 +11037,7 @@ lpfc_setup_cq_lookup(struct lpfc_hba *phba)
memset(phba->sli4_hba.cq_lookup, 0,
(sizeof(struct lpfc_queue *) * (phba->sli4_hba.cq_max + 1)));
- /* Loop thru all IRQ vectors */
+ /* Loop through all IRQ vectors */
for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) {
/* Get the EQ corresponding to the IRQ vector */
eq = phba->sli4_hba.hba_eq_hdl[qidx].eq;
@@ -11134,7 +11134,7 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
goto out_error;
}
- /* Loop thru all IRQ vectors */
+ /* Loop through all IRQ vectors */
for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) {
/* Create HBA Event Queues (EQs) in order */
for_each_present_cpu(cpu) {
@@ -11170,7 +11170,7 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba)
}
}
- /* Loop thru all Hardware Queues */
+ /* Loop through all Hardware Queues */
for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) {
cpu = lpfc_find_cpu_handle(phba, qidx, LPFC_FIND_BY_HDWQ);
cpup = &phba->sli4_hba.cpu_map[cpu];
@@ -11482,14 +11482,14 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba)
/* Unset fast-path SLI4 queues */
if (phba->sli4_hba.hdwq) {
- /* Loop thru all Hardware Queues */
+ /* Loop through all Hardware Queues */
for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) {
/* Destroy the CQ/WQ corresponding to Hardware Queue */
qp = &phba->sli4_hba.hdwq[qidx];
lpfc_wq_destroy(phba, qp->io_wq);
lpfc_cq_destroy(phba, qp->io_cq);
}
- /* Loop thru all IRQ vectors */
+ /* Loop through all IRQ vectors */
for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) {
/* Destroy the EQ corresponding to the IRQ vector */
eq = phba->sli4_hba.hba_eq_hdl[qidx].eq;
@@ -12253,7 +12253,7 @@ lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
}
}
- /* Fallback to INTx if both MSI-X/MSI initalization failed */
+ /* Fallback to INTx if both MSI-X/MSI initialization failed */
if (phba->intr_type == NONE) {
retval = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
IRQF_SHARED, LPFC_DRIVER_NAME, phba);
@@ -13242,7 +13242,7 @@ lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
}
}
- /* Fallback to INTx if both MSI-X/MSI initalization failed */
+ /* Fallback to INTx if both MSI-X/MSI initialization failed */
if (phba->intr_type == NONE) {
retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
IRQF_SHARED, LPFC_DRIVER_NAME, phba);
@@ -2950,13 +2950,13 @@ lpfc_device_recov_npr_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
* the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated,
* we will first process the ADISC list. 32 entries are processed initially and
* ADISC is initited for each one. Completions / Events for each node are
- * funnelled thru the state machine. As each node finishes ADISC processing, it
+ * funnelled through the state machine. As each node finishes ADISC processing, it
* starts ADISC for any nodes waiting for ADISC processing. If no nodes are
* waiting, and the ADISC list count is identically 0, then we are done. For
* Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we
* can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI
* list. 32 entries are processed initially and PLOGI is initited for each one.
- * Completions / Events for each node are funnelled thru the state machine. As
+ * Completions / Events for each node are funnelled through the state machine. As
* each node finishes PLOGI processing, it starts PLOGI for any nodes waiting
* for PLOGI processing. If no nodes are waiting, and the PLOGI list count is
* indentically 0, then we are done. We have now completed discovery / RSCN
@@ -242,7 +242,7 @@ lpfc_nvme_remoteport_delete(struct nvme_fc_remote_port *remoteport)
* @phba: pointer to lpfc hba data structure.
* @axchg: pointer to exchange context for the NVME LS request
*
- * This routine is used for processing an asychronously received NVME LS
+ * This routine is used for processing an asynchronously received NVME LS
* request. Any remaining validation is done and the LS is then forwarded
* to the nvme-fc transport via nvme_fc_rcv_ls_req().
*
@@ -567,8 +567,8 @@ lpfc_nvmet_ktime(struct lpfc_hba *phba,
* TRSP cmpl is passed to NVME Layer.
* Segment 10 - Time from FCP command received by
* MSI-X ISR to command is completed on wire.
- * (Segments 1 thru 8) for READDATA / WRITEDATA
- * (Segments 1 thru 4) for READDATA_RSP
+ * (Segments 1 through 8) for READDATA / WRITEDATA
+ * (Segments 1 through 4) for READDATA_RSP
*/
seg1 = ctxp->ts_cmd_nvme - ctxp->ts_isr_cmd;
segsum = seg1;
@@ -598,7 +598,7 @@ lpfc_nvmet_ktime(struct lpfc_hba *phba,
segsum += seg5;
- /* For auto rsp commands seg6 thru seg10 will be 0 */
+ /* For auto rsp commands seg6 through seg10 will be 0 */
if (ctxp->ts_nvme_status > ctxp->ts_data_nvme) {
seg6 = ctxp->ts_nvme_status - ctxp->ts_isr_cmd;
if (segsum > seg6)
@@ -1534,8 +1534,8 @@ lpfc_nvmet_setup_io_context(struct lpfc_hba *phba)
/*
* Setup the next CPU context info ptr for each MRQ.
- * MRQ 0 will cycle thru CPUs 0 - X separately from
- * MRQ 1 cycling thru CPUs 0 - X, and so on.
+ * MRQ 0 will cycle through CPUs 0 - X separately from
+ * MRQ 1 cycling through CPUs 0 - X, and so on.
*/
for (j = 0; j < phba->cfg_nvmet_mrq; j++) {
last_infop = lpfc_get_ctx_list(phba,
@@ -2129,7 +2129,7 @@ lpfc_nvmet_destroy_targetport(struct lpfc_hba *phba)
* @phba: pointer to lpfc hba data structure.
* @axchg: pointer to exchange context for the NVME LS request
*
- * This routine is used for processing an asychronously received NVME LS
+ * This routine is used for processing an asynchronously received NVME LS
* request. Any remaining validation is done and the LS is then forwarded
* to the nvmet-fc transport via nvmet_fc_rcv_ls_req().
*
@@ -2568,7 +2568,7 @@ lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba,
lpfc_cmd->prot_seg_cnt = protsegcnt;
/*
- * There is a minimun of 4 BPLs used for every
+ * There is a minimum of 4 BPLs used for every
* protection data segment.
*/
if ((lpfc_cmd->prot_seg_cnt * 4) >
@@ -3373,7 +3373,7 @@ lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba,
lpfc_cmd->prot_seg_cnt = protsegcnt;
/*
- * There is a minimun of 3 SGEs used for every
+ * There is a minimum of 3 SGEs used for every
* protection data segment.
*/
if (((lpfc_cmd->prot_seg_cnt * 3) >
@@ -5690,7 +5690,7 @@ lpfc_taskmgmt_name(uint8_t task_mgmt_cmd)
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_io_buf data structure.
*
- * This routine checks the FCP RSP INFO to see if the tsk mgmt command succeded
+ * This routine checks the FCP RSP INFO to see if the tsk mgmt command succeeded
*
* Return code :
* 0x2003 - Error
@@ -1162,7 +1162,7 @@ lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
* The active bit is always set in the active rrq xri_bitmap even
* if there is no slot avaiable for the other rrq information.
*
- * returns 0 rrq actived for this xri
+ * returns 0 rrq activated for this xri
* < 0 No memory or invalid ndlp.
**/
int
@@ -6150,7 +6150,7 @@ lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
LPFC_QUEUE_REARM);
if (sli4_hba->hdwq) {
- /* Loop thru all Hardware Queues */
+ /* Loop through all Hardware Queues */
for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) {
qp = &sli4_hba->hdwq[qidx];
/* ARM the corresponding CQ */
@@ -6158,7 +6158,7 @@ lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
LPFC_QUEUE_REARM);
}
- /* Loop thru all IRQ vectors */
+ /* Loop through all IRQ vectors */
for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) {
eq = sli4_hba->hba_eq_hdl[qidx].eq;
/* ARM the corresponding EQ */
@@ -15744,7 +15744,7 @@ __lpfc_sli4_switch_eqmode(struct lpfc_queue *eq, uint8_t mode)
* try to process the eq _but_ that's fine. We have a
* synchronization mechanism in place (queue_claimed) to
* deal with it. This is just a draining phase for int-
- * errupt handler (not eq's) as we have guranteed through
+ * errupt handler (not eq's) as we have guaranteed through
* barrier that all the CPUs have seen the new CQ_POLLED
* state. which will effectively disable the REARMING of
* the EQ. The whole idea is eq's die off eventually as
lpfc.h: Fixed multiple typos lpfc_attr.c: Fixed multiple typos lpfc_bsg.c: Fixed multiple typos lpfc_ct.c: Fixed multiple typos lpfc_debugfs.c: Fixed multiple typos lpfc_disc.h: Fixed multiple typos lpfc_els.c: Fixed multiple typos lpfc_hbadisc.c: Fixed multiple typos lpfc_init.c: Fixed multiple typos lpfc_nportdisc.c: Fixed multiple typos lpfc_nvme.c: Fixed multiple typos lpfc_nvmet.c: Fixed multiple typos lpfc_scsi.c: Fixed multiple typos lpfc_sli.c: Fixed multiple typos Signed-off-by: Muhammad Muzammil <m.muzzammilashraf@gmail.com> --- drivers/scsi/lpfc/lpfc.h | 2 +- drivers/scsi/lpfc/lpfc_attr.c | 2 +- drivers/scsi/lpfc/lpfc_bsg.c | 6 +++--- drivers/scsi/lpfc/lpfc_ct.c | 4 ++-- drivers/scsi/lpfc/lpfc_debugfs.c | 4 ++-- drivers/scsi/lpfc/lpfc_disc.h | 4 ++-- drivers/scsi/lpfc/lpfc_els.c | 16 ++++++++-------- drivers/scsi/lpfc/lpfc_hbadisc.c | 8 ++++---- drivers/scsi/lpfc/lpfc_init.c | 22 +++++++++++----------- drivers/scsi/lpfc/lpfc_nportdisc.c | 4 ++-- drivers/scsi/lpfc/lpfc_nvme.c | 2 +- drivers/scsi/lpfc/lpfc_nvmet.c | 12 ++++++------ drivers/scsi/lpfc/lpfc_scsi.c | 6 +++--- drivers/scsi/lpfc/lpfc_sli.c | 8 ++++---- 14 files changed, 50 insertions(+), 50 deletions(-)