diff mbox series

[v6,2/3] clocksource: Add JH7110 timer driver

Message ID 20231012081015.33121-3-xingyu.wu@starfivetech.com
State New
Headers show
Series None | expand

Commit Message

Xingyu Wu Oct. 12, 2023, 8:10 a.m. UTC
Add timer driver for the StarFive JH7110 SoC.

Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
---
 MAINTAINERS                        |   7 +
 drivers/clocksource/Kconfig        |  11 +
 drivers/clocksource/Makefile       |   1 +
 drivers/clocksource/timer-jh7110.c | 387 +++++++++++++++++++++++++++++
 4 files changed, 406 insertions(+)
 create mode 100644 drivers/clocksource/timer-jh7110.c

Comments

Emil Renner Berthing Oct. 13, 2023, 11:34 a.m. UTC | #1
Xingyu Wu wrote:
> Add timer driver for the StarFive JH7110 SoC.
>
> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> ---
>  MAINTAINERS                        |   7 +
>  drivers/clocksource/Kconfig        |  11 +
>  drivers/clocksource/Makefile       |   1 +
>  drivers/clocksource/timer-jh7110.c | 387 +++++++++++++++++++++++++++++
>  4 files changed, 406 insertions(+)
>  create mode 100644 drivers/clocksource/timer-jh7110.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6c4cce45a09d..1525f031d4a2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20472,6 +20472,13 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
>  F:	sound/soc/starfive/jh7110_tdm.c
>
> +STARFIVE JH7110 TIMER DRIVER
> +M:	Samin Guo <samin.guo@starfivetech.com>
> +M:	Xingyu Wu <xingyu.wu@starfivetech.com>
> +S:	Supported
> +F:	Documentation/devicetree/bindings/timer/starfive,jh7110-timer.yaml
> +F:	drivers/clocksource/timer-jh7110.c
> +
>  STARFIVE JH71X0 CLOCK DRIVERS
>  M:	Emil Renner Berthing <kernel@esmil.dk>
>  M:	Hal Feng <hal.feng@starfivetech.com>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 0ba0dc4ecf06..821abcc1e517 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -641,6 +641,17 @@ config RISCV_TIMER
>  	  is accessed via both the SBI and the rdcycle instruction.  This is
>  	  required for all RISC-V systems.
>
> +config STARFIVE_JH7110_TIMER
> +	bool "Timer for the STARFIVE JH7110 SoC"
> +	depends on ARCH_STARFIVE || COMPILE_TEST
> +	select TIMER_OF
> +	select CLKSRC_MMIO
> +	default ARCH_STARFIVE
> +	help
> +	  This enables the timer for StarFive JH7110 SoC. On RISC-V platform,
> +	  the system has started RISCV_TIMER, but you can also use this timer
> +	  which can provide four channels to do a lot more things on JH7110 SoC.
> +
>  config CLINT_TIMER
>  	bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
>  	depends on GENERIC_SCHED_CLOCK && RISCV
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 368c3461dab8..b66ac05ec086 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -80,6 +80,7 @@ obj-$(CONFIG_INGENIC_TIMER)		+= ingenic-timer.o
>  obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
>  obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
>  obj-$(CONFIG_RISCV_TIMER)		+= timer-riscv.o
> +obj-$(CONFIG_STARFIVE_JH7110_TIMER)	+= timer-jh7110.o
>  obj-$(CONFIG_CLINT_TIMER)		+= timer-clint.o
>  obj-$(CONFIG_CSKY_MP_TIMER)		+= timer-mp-csky.o
>  obj-$(CONFIG_GX6605S_TIMER)		+= timer-gx6605s.o
> diff --git a/drivers/clocksource/timer-jh7110.c b/drivers/clocksource/timer-jh7110.c
> new file mode 100644
> index 000000000000..914424368290
> --- /dev/null
> +++ b/drivers/clocksource/timer-jh7110.c
> @@ -0,0 +1,387 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Starfive JH7110 Timer driver
> + *
> + * Copyright (C) 2022-2023 StarFive Technology Co., Ltd.
> + *
> + * Author:
> + * Xingyu Wu <xingyu.wu@starfivetech.com>
> + * Samin Guo <samin.guo@starfivetech.com>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clockchips.h>
> +#include <linux/clocksource.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/sched_clock.h>
> +
> +/* Bias: Ch0-0x0, Ch1-0x40, Ch2-0x80, and so on. */
> +#define JH7110_TIMER_CH_LEN		0x40
> +#define JH7110_TIMER_CH_BASE(x)		((x) * JH7110_TIMER_CH_LEN)
> +#define JH7110_TIMER_CH_MAX		4
> +
> +#define JH7110_CLOCK_SOURCE_RATING	200
> +#define JH7110_VALID_BITS		32
> +#define JH7110_DELAY_US			0
> +#define JH7110_TIMEOUT_US		10000
> +#define JH7110_CLOCKEVENT_RATING	300
> +#define JH7110_TIMER_MAX_TICKS		0xffffffff
> +#define JH7110_TIMER_MIN_TICKS		0xf
> +#define JH7110_TIMER_NAME_NUM		19
> +
> +#define JH7110_TIMER_INT_STATUS		0x00 /* RO[0:4]: Interrupt Status for channel0~4 */
> +#define JH7110_TIMER_CTL		0x04 /* RW[0]: 0-continuous run, 1-single run */
> +#define JH7110_TIMER_LOAD		0x08 /* RW: load value to counter */
> +#define JH7110_TIMER_ENABLE		0x10 /* RW[0]: timer enable register */
> +#define JH7110_TIMER_RELOAD		0x14 /* RW: write 1 or 0 both reload counter */
> +#define JH7110_TIMER_VALUE		0x18 /* RO: timer value register */
> +#define JH7110_TIMER_INT_CLR		0x20 /* RW: timer interrupt clear register */
> +#define JH7110_TIMER_INT_MASK		0x24 /* RW[0]: timer interrupt mask register */
> +#define JH7110_TIMER_INT_CLR_AVA_MASK	BIT(1)
> +
> +struct jh7110_clkevt {
> +	struct clock_event_device evt;
> +	struct clocksource cs;
> +	struct clk *clk;
> +	char name[JH7110_TIMER_NAME_NUM];

Instead of this define maybe just use something like

	char name[sizeof("jh7110-timer.chX")];

> +	int irq;

You wrote that you "dropped the extra copy of irq", but here you didn't.

> +	u32 rate;
> +	u32 reload_val;
> +	void __iomem *base;
> +};
> +
> +static inline struct jh7110_clkevt *to_jh7110_clkevt(struct clock_event_device *evt)
> +{
> +	return container_of(evt, struct jh7110_clkevt, evt);
> +}
> +
> +/* 0:continuous-run mode, 1:single-run mode */
> +static inline void jh7110_timer_set_continuous_mod(struct jh7110_clkevt *clkevt)
> +{
> +	writel(0, clkevt->base + JH7110_TIMER_CTL);
> +}
> +
> +static inline void jh7110_timer_set_single_mod(struct jh7110_clkevt *clkevt)
> +{
> +	writel(1, clkevt->base + JH7110_TIMER_CTL);
> +}
> +
> +/* Interrupt Mask Register, 0:Unmask, 1:Mask */
> +static inline void jh7110_timer_int_enable(struct jh7110_clkevt *clkevt)
> +{
> +	writel(0, clkevt->base + JH7110_TIMER_INT_MASK);
> +}
> +
> +static inline void jh7110_timer_int_disable(struct jh7110_clkevt *clkevt)
> +{
> +	writel(1, clkevt->base + JH7110_TIMER_INT_MASK);
> +}

I really don't think all these wrappers make the code any clearer. Please just
inline the writel() calls. What you can do to make it a bit clearer is
something like

enum {
	JH7110_TIMER_MODE_CONTINUOUS,
	JH7110_TIMER_MODE_SINGLE,
};

so you can write

	writel(JH7110_TIMER_MODE_CONTINUOUS, clkevt->base + JH7110_TIMER_CTL);

> +
> +/*
> + * BIT(0): Read value represent channel intr status.
> + * Write 1 to this bit to clear interrupt. Write 0 has no effects.
> + * BIT(1): "1" means that it is clearing interrupt. BIT(0) can not be written.
> + */
> +static inline int jh7110_timer_int_clear(struct jh7110_clkevt *clkevt)
> +{
> +	u32 value;
> +	int ret;
> +
> +	/* waiting interrupt can be to clearing */
> +	ret = readl_poll_timeout_atomic(clkevt->base + JH7110_TIMER_INT_CLR, value,
> +					!(value & JH7110_TIMER_INT_CLR_AVA_MASK),
> +					JH7110_DELAY_US, JH7110_TIMEOUT_US);
> +	if (!ret)
> +		writel(0x1, clkevt->base + JH7110_TIMER_INT_CLR);
> +
> +	return ret;
> +}
> +
> +/*
> + * The initial value to be loaded into the
> + * counter and is also used as the reload value.
> + * val = clock rate --> 1s
> + */
> +static inline void jh7110_timer_set_load(struct jh7110_clkevt *clkevt, u32 val)
> +{
> +	writel(val, clkevt->base + JH7110_TIMER_LOAD);
> +}
> +
> +static inline u32 jh7110_timer_get_val(struct jh7110_clkevt *clkevt)
> +{
> +	return readl(clkevt->base + JH7110_TIMER_VALUE);
> +}
> +
> +/*
> + * Write RELOAD register to reload preset value to counter.
> + * Write 0 and write 1 are both ok.
> + */
> +static inline void jh7110_timer_set_reload(struct jh7110_clkevt *clkevt)
> +{
> +	writel(0, clkevt->base + JH7110_TIMER_RELOAD);
> +}
> +
> +static inline void jh7110_timer_enable(struct jh7110_clkevt *clkevt)
> +{
> +	writel(1, clkevt->base + JH7110_TIMER_ENABLE);
> +}
> +
> +static inline void jh7110_timer_disable(struct jh7110_clkevt *clkevt)
> +{
> +	writel(0, clkevt->base + JH7110_TIMER_ENABLE);
> +}

The same thing goes for all these wrappers. If you do insist on having these
wrappers then at least group them all together so you can quickly scroll past
them to get to the "real" code.

> +
> +static int jh7110_timer_int_init_enable(struct jh7110_clkevt *clkevt)
> +{
> +	int ret;
> +
> +	jh7110_timer_int_disable(clkevt);
> +	ret = jh7110_timer_int_clear(clkevt);
> +	if (ret)
> +		return ret;
> +
> +	jh7110_timer_int_enable(clkevt);
> +	jh7110_timer_enable(clkevt);
> +
> +	return 0;
> +}
> +
> +static int jh7110_timer_shutdown(struct clock_event_device *evt)
> +{
> +	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> +
> +	jh7110_timer_disable(clkevt);
> +	return jh7110_timer_int_clear(clkevt);
> +}
> +
> +static void jh7110_timer_suspend(struct clock_event_device *evt)
> +{
> +	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> +
> +	clkevt->reload_val = jh7110_timer_get_val(clkevt);
> +	jh7110_timer_shutdown(evt);
> +}
> +
> +static void jh7110_timer_resume(struct clock_event_device *evt)
> +{
> +	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> +
> +	jh7110_timer_set_load(clkevt, clkevt->reload_val);
> +	jh7110_timer_set_reload(clkevt);
> +	jh7110_timer_int_enable(clkevt);
> +	jh7110_timer_enable(clkevt);
> +}
> +
> +static int jh7110_timer_tick_resume(struct clock_event_device *evt)
> +{
> +	jh7110_timer_resume(evt);
> +
> +	return 0;
> +}
> +
> +/* IRQ handler for the timer */
> +static irqreturn_t jh7110_timer_interrupt(int irq, void *priv)
> +{
> +	struct clock_event_device *evt = (struct clock_event_device *)priv;
> +	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> +
> +	if (jh7110_timer_int_clear(clkevt))
> +		return IRQ_NONE;
> +
> +	if (evt->event_handler)
> +		evt->event_handler(evt);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int jh7110_timer_set_periodic(struct clock_event_device *evt)
> +{
> +	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> +	u32 periodic = DIV_ROUND_CLOSEST(clkevt->rate, HZ);
> +
> +	jh7110_timer_disable(clkevt);
> +	jh7110_timer_set_continuous_mod(clkevt);
> +	jh7110_timer_set_load(clkevt, periodic);
> +
> +	return jh7110_timer_int_init_enable(clkevt);
> +}
> +
> +static int jh7110_timer_set_oneshot(struct clock_event_device *evt)
> +{
> +	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> +
> +	jh7110_timer_disable(clkevt);
> +	jh7110_timer_set_single_mod(clkevt);
> +	jh7110_timer_set_load(clkevt, JH7110_TIMER_MAX_TICKS);
> +
> +	return jh7110_timer_int_init_enable(clkevt);
> +}
> +
> +static int jh7110_timer_set_next_event(unsigned long next,
> +				       struct clock_event_device *evt)
> +{
> +	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
> +
> +	jh7110_timer_disable(clkevt);
> +	jh7110_timer_set_single_mod(clkevt);
> +	jh7110_timer_set_load(clkevt, next);
> +	jh7110_timer_enable(clkevt);
> +
> +	return 0;
> +}
> +
> +static void jh7110_set_clockevent(struct clock_event_device *evt)
> +{
> +	evt->features = CLOCK_EVT_FEAT_PERIODIC |
> +			CLOCK_EVT_FEAT_ONESHOT |
> +			CLOCK_EVT_FEAT_DYNIRQ;
> +	evt->set_state_shutdown = jh7110_timer_shutdown;
> +	evt->set_state_periodic = jh7110_timer_set_periodic;
> +	evt->set_state_oneshot = jh7110_timer_set_oneshot;
> +	evt->set_state_oneshot_stopped = jh7110_timer_shutdown;
> +	evt->tick_resume = jh7110_timer_tick_resume;
> +	evt->set_next_event = jh7110_timer_set_next_event;
> +	evt->suspend = jh7110_timer_suspend;
> +	evt->resume = jh7110_timer_resume;
> +	evt->rating = JH7110_CLOCKEVENT_RATING;
> +}
> +
> +static u64 jh7110_timer_clocksource_read(struct clocksource *cs)
> +{
> +	struct jh7110_clkevt *clkevt = container_of(cs, struct jh7110_clkevt, cs);
> +
> +	return (u64)jh7110_timer_get_val(clkevt);
> +}
> +
> +static int jh7110_clocksource_init(struct jh7110_clkevt *clkevt)
> +{
> +	int ret;
> +
> +	jh7110_timer_set_continuous_mod(clkevt);
> +	jh7110_timer_set_load(clkevt, JH7110_TIMER_MAX_TICKS);
> +
> +	ret = jh7110_timer_int_init_enable(clkevt);
> +	if (ret)
> +		return ret;
> +
> +	clkevt->cs.name = clkevt->name;
> +	clkevt->cs.rating = JH7110_CLOCK_SOURCE_RATING;
> +	clkevt->cs.read = jh7110_timer_clocksource_read;
> +	clkevt->cs.mask = CLOCKSOURCE_MASK(JH7110_VALID_BITS);
> +	clkevt->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
> +
> +	return clocksource_register_hz(&clkevt->cs, clkevt->rate);
> +}
> +
> +static void jh7110_clockevents_register(struct jh7110_clkevt *clkevt)
> +{
> +	clkevt->rate = clk_get_rate(clkevt->clk);
> +
> +	jh7110_set_clockevent(&clkevt->evt);
> +	clkevt->evt.name = clkevt->name;
> +	clkevt->evt.cpumask = cpu_possible_mask;
> +
> +	clockevents_config_and_register(&clkevt->evt, clkevt->rate,
> +					JH7110_TIMER_MIN_TICKS, JH7110_TIMER_MAX_TICKS);
> +}
> +
> +static int jh7110_timer_probe(struct platform_device *pdev)
> +{
> +	struct jh7110_clkevt *clkevt[JH7110_TIMER_CH_MAX];
> +	char name[4];
> +	struct clk *pclk;
> +	struct reset_control *rst;
> +	int ch;
> +	int ret;
> +	void __iomem *base;
> +
> +	base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(base))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(base),
> +				     "failed to map registers\n");
> +
> +	rst = devm_reset_control_get_exclusive(&pdev->dev, "apb");
> +	if (IS_ERR(rst))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(rst), "failed to get apb reset\n");
> +
> +	pclk = devm_clk_get_enabled(&pdev->dev, "apb");
> +	if (IS_ERR(pclk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(pclk),
> +				     "failed to get & enable apb clock\n");
> +
> +	ret = reset_control_deassert(rst);
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret, "failed to deassert apb reset\n");
> +
> +	for (ch = 0; ch < JH7110_TIMER_CH_MAX; ch++) {
> +		clkevt[ch] = devm_kzalloc(&pdev->dev, sizeof(*clkevt[ch]), GFP_KERNEL);
> +		if (!clkevt[ch])
> +			return -ENOMEM;
> +
> +		snprintf(name, sizeof(name), "ch%d", ch);
> +
> +		clkevt[ch]->base = base + JH7110_TIMER_CH_BASE(ch);
> +		/* Ensure timer is disabled */
> +		jh7110_timer_disable(clkevt[ch]);
> +
> +		rst = devm_reset_control_get_exclusive(&pdev->dev, name);
> +		if (IS_ERR(rst))
> +			return PTR_ERR(rst);
> +
> +		clkevt[ch]->clk = devm_clk_get_enabled(&pdev->dev, name);
> +		if (IS_ERR(clkevt[ch]->clk))
> +			return PTR_ERR(clkevt[ch]->clk);
> +
> +		ret = reset_control_deassert(rst);
> +		if (ret)
> +			return ret;
> +
> +		clkevt[ch]->evt.irq = platform_get_irq(pdev, ch);
> +		if (clkevt[ch]->evt.irq < 0)
> +			return clkevt[ch]->evt.irq;
> +
> +		snprintf(clkevt[ch]->name, sizeof(clkevt[ch]->name), "%s.ch%d", pdev->name, ch);
> +		jh7110_clockevents_register(clkevt[ch]);
> +
> +		ret = devm_request_irq(&pdev->dev, clkevt[ch]->evt.irq, jh7110_timer_interrupt,
> +				       IRQF_TIMER | IRQF_IRQPOLL,
> +				       clkevt[ch]->name, &clkevt[ch]->evt);
> +		if (ret)
> +			return ret;
> +
> +		ret = jh7110_clocksource_init(clkevt[ch]);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id jh7110_timer_match[] = {
> +	{ .compatible = "starfive,jh7110-timer", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, jh7110_timer_match);
> +
> +static struct platform_driver jh7110_timer_driver = {
> +	.probe = jh7110_timer_probe,
> +	.driver = {
> +		.name = "jh7110-timer",
> +		.of_match_table = jh7110_timer_match,
> +	},
> +};
> +module_platform_driver(jh7110_timer_driver);
> +
> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
> +MODULE_DESCRIPTION("StarFive JH7110 timer driver");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Christophe JAILLET Oct. 13, 2023, 6:02 p.m. UTC | #2
Le 13/10/2023 à 11:34, Xingyu Wu a écrit :
> On 2023/10/13 1:53, Christophe JAILLET wrote:
>> Le 12/10/2023 à 10:10, Xingyu Wu a écrit :
>>> Add timer driver for the StarFive JH7110 SoC.
>>>
>>> Signed-off-by: Xingyu Wu <xingyu.wu-bONrM45KWFOXmMXjJBpWqg-XMD5yJDbdMStu3cLTcvVIw@public.gmane.orge.org>
>>
>> ...
> 
> It looks normal in my email and the web. Is this due to some settings?

Hi,

I use gmane.org and a news reader (Thunderbird).
Gmane sometimes (not always!) obfuscate e-mail addresses.

Do not pay attantion to these strange rewritten addresses.

> 
>>
>>> +static int jh7110_timer_probe(struct platform_device *pdev)
>>> +{
>>> +    struct jh7110_clkevt *clkevt[JH7110_TIMER_CH_MAX];
>>> +    char name[4];
>>> +    struct clk *pclk;
>>> +    struct reset_control *rst;
>>> +    int ch;
>>> +    int ret;
>>> +    void __iomem *base;
>>> +
>>> +    base = devm_platform_ioremap_resource(pdev, 0);
>>> +    if (IS_ERR(base))
>>> +        return dev_err_probe(&pdev->dev, PTR_ERR(base),
>>> +                     "failed to map registers\n");
>>> +
>>> +    rst = devm_reset_control_get_exclusive(&pdev->dev, "apb");
>>> +    if (IS_ERR(rst))
>>> +        return dev_err_probe(&pdev->dev, PTR_ERR(rst), "failed to get apb reset\n");
>>> +
>>> +    pclk = devm_clk_get_enabled(&pdev->dev, "apb");
>>> +    if (IS_ERR(pclk))
>>> +        return dev_err_probe(&pdev->dev, PTR_ERR(pclk),
>>> +                     "failed to get & enable apb clock\n");
>>> +
>>> +    ret = reset_control_deassert(rst);
>>> +    if (ret)
>>> +        return dev_err_probe(&pdev->dev, ret, "failed to deassert apb reset\n");
>>
>> Hi,
>>
>> I'm not very familiar with the reset_control_[de]assert() functions, but shouldn't this be undone by a reset_control_assert() call if an error occurs later?
> 
> In this case, the reset controller is set from 'assert' state to 'deassert' state. If it is failed and still 'assert' state, I don't think it need to call reset_control_assert().

Emil already explained what I meaned (sorry for not being clear enough).
I do agree with his proposed approach.

> 
>>
>>> +
>>> +    for (ch = 0; ch < JH7110_TIMER_CH_MAX; ch++) {
>>> +        clkevt[ch] = devm_kzalloc(&pdev->dev, sizeof(*clkevt[ch]), GFP_KERNEL);
>>> +        if (!clkevt[ch])
>>> +            return -ENOMEM;
>>> +
>>> +        snprintf(name, sizeof(name), "ch%d", ch);
>>> +
>>> +        clkevt[ch]->base = base + JH7110_TIMER_CH_BASE(ch);
>>> +        /* Ensure timer is disabled */
>>> +        jh7110_timer_disable(clkevt[ch]);
>>> +
>>> +        rst = devm_reset_control_get_exclusive(&pdev->dev, name);
>>> +        if (IS_ERR(rst))
>>> +            return PTR_ERR(rst);
>>> +
>>> +        clkevt[ch]->clk = devm_clk_get_enabled(&pdev->dev, name);
>>> +        if (IS_ERR(clkevt[ch]->clk))
>>> +            return PTR_ERR(clkevt[ch]->clk);
>>> +
>>> +        ret = reset_control_deassert(rst);
>>> +        if (ret)
>>> +            return ret;
>>
>> Same here.
>>
>>> +
>>> +        clkevt[ch]->evt.irq = platform_get_irq(pdev, ch);
>>> +        if (clkevt[ch]->evt.irq < 0)
>>> +            return clkevt[ch]->evt.irq;
>>> +
>>> +        snprintf(clkevt[ch]->name, sizeof(clkevt[ch]->name), "%s.ch%d", pdev->name, ch);
>>> +        jh7110_clockevents_register(clkevt[ch]);
>>> +
>>> +        ret = devm_request_irq(&pdev->dev, clkevt[ch]->evt.irq, jh7110_timer_interrupt,
>>> +                       IRQF_TIMER | IRQF_IRQPOLL,
>>> +                       clkevt[ch]->name, &clkevt[ch]->evt);
>>> +        if (ret)
>>> +            return ret;
>>> +
>>> +        ret = jh7110_clocksource_init(clkevt[ch]);
>>
>> Does something should be done if this fails?
>>
>> CJ
> 
> Yes, it should be call reset_control_assert() here and I will add it in next version.

My point was for the above reset_control_assert() but also for the 
resources allocated within this for loop.

I have not checked all paths, but in case of error in the probe:
   - There is another reset_control_deassert()

   - jh7110_clocksource_init() --> jh7110_timer_int_init_enable() --> 
jh7110_timer_enable()
     Should jh7110_timer_disable() be called?

   - jh7110_clocksource_init() --> clocksource_register_hz().
     Should clocksource_unregister() be called?

If I'm correct and depending on how you update the code, a .remove 
function may be needed as well.

CJ

> 
>>
>>> +        if (ret)
>>> +            return ret;
>>> +    }
>>> +
>>> +    return 0;
>>> +}
>>> +
>>> +static const struct of_device_id jh7110_timer_match[] = {
>>> +    { .compatible = "starfive,jh7110-timer", },
>>> +    { /* sentinel */ }
>>> +};
>>> +MODULE_DEVICE_TABLE(of, jh7110_timer_match);
>>> +
>>> +static struct platform_driver jh7110_timer_driver = {
>>> +    .probe = jh7110_timer_probe,
>>> +    .driver = {
>>> +        .name = "jh7110-timer",
>>> +        .of_match_table = jh7110_timer_match,
>>> +    },
>>> +};
>>> +module_platform_driver(jh7110_timer_driver);
>>> +
>>> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu-bONrM45KWFOXmMXjJBpWqg-XMD5yJDbdMRS5n6/RkiaJA@public.gmane.orgne.org>");
>>> +MODULE_DESCRIPTION("StarFive JH7110 timer driver");
>>> +MODULE_LICENSE("GPL");
>>
> 
> Thanks,
> Xingyu Wu
> 
> 
>
Emil Renner Berthing Oct. 16, 2023, 10:20 a.m. UTC | #3
Xingyu Wu wrote:
> On 2023/10/16 17:23, Emil Renner Berthing wrote:
> > Xingyu Wu wrote:
> >> On 2023/10/13 19:34, Emil Renner Berthing wrote:
> >> > Xingyu Wu wrote:
> >> >> Add timer driver for the StarFive JH7110 SoC.
> >> >>
> >> >> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> >> >> ---
> >> >>  MAINTAINERS                        |   7 +
> >> >>  drivers/clocksource/Kconfig        |  11 +
> >> >>  drivers/clocksource/Makefile       |   1 +
> >> >>  drivers/clocksource/timer-jh7110.c | 387 +++++++++++++++++++++++++++++
> >> >>  4 files changed, 406 insertions(+)
> >> >>  create mode 100644 drivers/clocksource/timer-jh7110.c
> >> >>
> >> >> diff --git a/MAINTAINERS b/MAINTAINERS
> >> >> index 6c4cce45a09d..1525f031d4a2 100644
> >> >> --- a/MAINTAINERS
> >> >> +++ b/MAINTAINERS
> >> >> @@ -20472,6 +20472,13 @@ S:	Maintained
> >> >>  F:	Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
> >> >>  F:	sound/soc/starfive/jh7110_tdm.c
> >> >>
> >> >> +STARFIVE JH7110 TIMER DRIVER
> >> >> +M:	Samin Guo <samin.guo@starfivetech.com>
> >> >> +M:	Xingyu Wu <xingyu.wu@starfivetech.com>
> >> >> +S:	Supported
> >> >> +F:	Documentation/devicetree/bindings/timer/starfive,jh7110-timer.yaml
> >> >> +F:	drivers/clocksource/timer-jh7110.c
> >> >> +
> >> >>  STARFIVE JH71X0 CLOCK DRIVERS
> >> >>  M:	Emil Renner Berthing <kernel@esmil.dk>
> >> >>  M:	Hal Feng <hal.feng@starfivetech.com>
> >> >> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> >> >> index 0ba0dc4ecf06..821abcc1e517 100644
> >> >> --- a/drivers/clocksource/Kconfig
> >> >> +++ b/drivers/clocksource/Kconfig
> >> >> @@ -641,6 +641,17 @@ config RISCV_TIMER
> >> >>  	  is accessed via both the SBI and the rdcycle instruction.  This is
> >> >>  	  required for all RISC-V systems.
> >> >>
> >> >> +config STARFIVE_JH7110_TIMER
> >> >> +	bool "Timer for the STARFIVE JH7110 SoC"
> >> >> +	depends on ARCH_STARFIVE || COMPILE_TEST
> >> >> +	select TIMER_OF
> >> >> +	select CLKSRC_MMIO
> >> >> +	default ARCH_STARFIVE
> >> >> +	help
> >> >> +	  This enables the timer for StarFive JH7110 SoC. On RISC-V platform,
> >> >> +	  the system has started RISCV_TIMER, but you can also use this timer
> >> >> +	  which can provide four channels to do a lot more things on JH7110 SoC.
> >> >> +
> >> >>  config CLINT_TIMER
> >> >>  	bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
> >> >>  	depends on GENERIC_SCHED_CLOCK && RISCV
> >> >> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> >> >> index 368c3461dab8..b66ac05ec086 100644
> >> >> --- a/drivers/clocksource/Makefile
> >> >> +++ b/drivers/clocksource/Makefile
> >> >> @@ -80,6 +80,7 @@ obj-$(CONFIG_INGENIC_TIMER)		+= ingenic-timer.o
> >> >>  obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
> >> >>  obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
> >> >>  obj-$(CONFIG_RISCV_TIMER)		+= timer-riscv.o
> >> >> +obj-$(CONFIG_STARFIVE_JH7110_TIMER)	+= timer-jh7110.o
> >> >>  obj-$(CONFIG_CLINT_TIMER)		+= timer-clint.o
> >> >>  obj-$(CONFIG_CSKY_MP_TIMER)		+= timer-mp-csky.o
> >> >>  obj-$(CONFIG_GX6605S_TIMER)		+= timer-gx6605s.o
> >> >> diff --git a/drivers/clocksource/timer-jh7110.c b/drivers/clocksource/timer-jh7110.c
> >> >> new file mode 100644
> >> >> index 000000000000..914424368290
> >> >> --- /dev/null
> >> >> +++ b/drivers/clocksource/timer-jh7110.c
> >> >> @@ -0,0 +1,387 @@
> >> >> +// SPDX-License-Identifier: GPL-2.0
> >> >> +/*
> >> >> + * Starfive JH7110 Timer driver
> >> >> + *
> >> >> + * Copyright (C) 2022-2023 StarFive Technology Co., Ltd.
> >> >> + *
> >> >> + * Author:
> >> >> + * Xingyu Wu <xingyu.wu@starfivetech.com>
> >> >> + * Samin Guo <samin.guo@starfivetech.com>
> >> >> + */
> >> >> +
> >> >> +#include <linux/clk.h>
> >> >> +#include <linux/clockchips.h>
> >> >> +#include <linux/clocksource.h>
> >> >> +#include <linux/err.h>
> >> >> +#include <linux/interrupt.h>
> >> >> +#include <linux/io.h>
> >> >> +#include <linux/iopoll.h>
> >> >> +#include <linux/irq.h>
> >> >> +#include <linux/kernel.h>
> >> >> +#include <linux/module.h>
> >> >> +#include <linux/of.h>
> >> >> +#include <linux/of_device.h>
> >> >> +#include <linux/platform_device.h>
> >> >> +#include <linux/reset.h>
> >> >> +#include <linux/sched_clock.h>
> >> >> +
> >> >> +/* Bias: Ch0-0x0, Ch1-0x40, Ch2-0x80, and so on. */
> >> >> +#define JH7110_TIMER_CH_LEN		0x40
> >> >> +#define JH7110_TIMER_CH_BASE(x)		((x) * JH7110_TIMER_CH_LEN)
> >> >> +#define JH7110_TIMER_CH_MAX		4
> >> >> +
> >> >> +#define JH7110_CLOCK_SOURCE_RATING	200
> >> >> +#define JH7110_VALID_BITS		32
> >> >> +#define JH7110_DELAY_US			0
> >> >> +#define JH7110_TIMEOUT_US		10000
> >> >> +#define JH7110_CLOCKEVENT_RATING	300
> >> >> +#define JH7110_TIMER_MAX_TICKS		0xffffffff
> >> >> +#define JH7110_TIMER_MIN_TICKS		0xf
> >> >> +#define JH7110_TIMER_NAME_NUM		19
> >> >> +
> >> >> +#define JH7110_TIMER_INT_STATUS		0x00 /* RO[0:4]: Interrupt Status for channel0~4 */
> >> >> +#define JH7110_TIMER_CTL		0x04 /* RW[0]: 0-continuous run, 1-single run */
> >> >> +#define JH7110_TIMER_LOAD		0x08 /* RW: load value to counter */
> >> >> +#define JH7110_TIMER_ENABLE		0x10 /* RW[0]: timer enable register */
> >> >> +#define JH7110_TIMER_RELOAD		0x14 /* RW: write 1 or 0 both reload counter */
> >> >> +#define JH7110_TIMER_VALUE		0x18 /* RO: timer value register */
> >> >> +#define JH7110_TIMER_INT_CLR		0x20 /* RW: timer interrupt clear register */
> >> >> +#define JH7110_TIMER_INT_MASK		0x24 /* RW[0]: timer interrupt mask register */
> >> >> +#define JH7110_TIMER_INT_CLR_AVA_MASK	BIT(1)
> >> >> +
> >> >> +struct jh7110_clkevt {
> >> >> +	struct clock_event_device evt;
> >> >> +	struct clocksource cs;
> >> >> +	struct clk *clk;
> >> >> +	char name[JH7110_TIMER_NAME_NUM];
> >> >
> >> > Instead of this define maybe just use something like
> >> >
> >> > 	char name[sizeof("jh7110-timer.chX")];
> >> >
> >>
> >> Will fix.
> >>
> >> >> +	int irq;
> >> >
> >> > You wrote that you "dropped the extra copy of irq", but here you didn't.
> >>
> >> What I mean is to drop the local variable of irq in the probe. Do you mean to use a local variable instead this in the probe?
> >
> > No, what I mean is that this field is no longer used, so you can delete it.
> >
>
> OK, drop it here.
>
> >>
> >> >> +
> >> >> +static int jh7110_timer_probe(struct platform_device *pdev)
> >> >> +{
> >> >> +	struct jh7110_clkevt *clkevt[JH7110_TIMER_CH_MAX];
> >> >> +	char name[4];
> >> >> +	struct clk *pclk;
> >> >> +	struct reset_control *rst;
> >> >> +	int ch;
> >> >> +	int ret;
> >> >> +	void __iomem *base
> >> >> +
> >> >> +	base = devm_platform_ioremap_resource(pdev, 0);
> >> >> +	if (IS_ERR(base))
> >> >> +		return dev_err_probe(&pdev->dev, PTR_ERR(base),
> >> >> +				     "failed to map registers\n");
> >> >> +
> >> >> +	rst = devm_reset_control_get_exclusive(&pdev->dev, "apb");
> >> >> +	if (IS_ERR(rst))
> >> >> +		return dev_err_probe(&pdev->dev, PTR_ERR(rst), "failed to get apb reset\n");
> >> >> +
> >> >> +	pclk = devm_clk_get_enabled(&pdev->dev, "apb");
> >> >> +	if (IS_ERR(pclk))
> >> >> +		return dev_err_probe(&pdev->dev, PTR_ERR(pclk),
> >> >> +				     "failed to get & enable apb clock\n");
> >> >> +
> >> >> +	ret = reset_control_deassert(rst);
> >> >> +	if (ret)
> >> >> +		return dev_err_probe(&pdev->dev, ret, "failed to deassert apb reset\n");
> >> >> +
> >> >> +	for (ch = 0; ch < JH7110_TIMER_CH_MAX; ch++) {
> >> >> +		clkevt[ch] = devm_kzalloc(&pdev->dev, sizeof(*clkevt[ch]), GFP_KERNEL);
> >> >> +		if (!clkevt[ch])
> >> >> +			return -ENOMEM;
> >> >> +
> >> >> +		snprintf(name, sizeof(name), "ch%d", ch);
> >> >> +
> >> >> +		clkevt[ch]->base = base + JH7110_TIMER_CH_BASE(ch);
> >> >> +		/* Ensure timer is disabled */
> >> >> +		jh7110_timer_disable(clkevt[ch]);
> >> >> +
> >> >> +		rst = devm_reset_control_get_exclusive(&pdev->dev, name);
> >> >> +		if (IS_ERR(rst))
> >> >> +			return PTR_ERR(rst);
> >> >> +
> >> >> +		clkevt[ch]->clk = devm_clk_get_enabled(&pdev->dev, name);
> >> >> +		if (IS_ERR(clkevt[ch]->clk))
> >> >> +			return PTR_ERR(clkevt[ch]->clk);
> >> >> +
> >> >> +		ret = reset_control_deassert(rst);
> >> >> +		if (ret)
> >> >> +			return ret;
> >> >> +
> >> >> +		clkevt[ch]->evt.irq = platform_get_irq(pdev, ch);
> >> >> +		if (clkevt[ch]->evt.irq < 0)
> >> >> +			return clkevt[ch]->evt.irq;
> I should use a local variable of irq instead here. Right?

No, I don't think so.

> >> >> +
> >> >> +		snprintf(clkevt[ch]->name, sizeof(clkevt[ch]->name), "%s.ch%d", pdev->name, ch);
> >> >> +		jh7110_clockevents_register(clkevt[ch]);
> >> >> +
> >> >> +		ret = devm_request_irq(&pdev->dev, clkevt[ch]->evt.irq, jh7110_timer_interrupt,
> >> >> +				       IRQF_TIMER | IRQF_IRQPOLL,
> >> >> +				       clkevt[ch]->name, &clkevt[ch]->evt);
> >> >> +		if (ret)
> >> >> +			return ret;
> >> >> +
> >> >> +		ret = jh7110_clocksource_init(clkevt[ch]);
> >> >> +		if (ret)
> >> >> +			return ret;
> >> >> +	}
> >> >> +
> >> >> +	return 0;
> >> >> +}
> >> >> +
> >> >> +static const struct of_device_id jh7110_timer_match[] = {
> >> >> +	{ .compatible = "starfive,jh7110-timer", },
> >> >> +	{ /* sentinel */ }
> >> >> +};
> >> >> +MODULE_DEVICE_TABLE(of, jh7110_timer_match);
> >> >> +
> >> >> +static struct platform_driver jh7110_timer_driver = {
> >> >> +	.probe = jh7110_timer_probe,
> >> >> +	.driver = {
> >> >> +		.name = "jh7110-timer",
> >> >> +		.of_match_table = jh7110_timer_match,
> >> >> +	},
> >> >> +};
> >> >> +module_platform_driver(jh7110_timer_driver);
> >> >> +
> >> >> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
> >> >> +MODULE_DESCRIPTION("StarFive JH7110 timer driver");
> >> >> +MODULE_LICENSE("GPL");
> >> >> --
> >> >> 2.25.1
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 6c4cce45a09d..1525f031d4a2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20472,6 +20472,13 @@  S:	Maintained
 F:	Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
 F:	sound/soc/starfive/jh7110_tdm.c
 
+STARFIVE JH7110 TIMER DRIVER
+M:	Samin Guo <samin.guo@starfivetech.com>
+M:	Xingyu Wu <xingyu.wu@starfivetech.com>
+S:	Supported
+F:	Documentation/devicetree/bindings/timer/starfive,jh7110-timer.yaml
+F:	drivers/clocksource/timer-jh7110.c
+
 STARFIVE JH71X0 CLOCK DRIVERS
 M:	Emil Renner Berthing <kernel@esmil.dk>
 M:	Hal Feng <hal.feng@starfivetech.com>
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 0ba0dc4ecf06..821abcc1e517 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -641,6 +641,17 @@  config RISCV_TIMER
 	  is accessed via both the SBI and the rdcycle instruction.  This is
 	  required for all RISC-V systems.
 
+config STARFIVE_JH7110_TIMER
+	bool "Timer for the STARFIVE JH7110 SoC"
+	depends on ARCH_STARFIVE || COMPILE_TEST
+	select TIMER_OF
+	select CLKSRC_MMIO
+	default ARCH_STARFIVE
+	help
+	  This enables the timer for StarFive JH7110 SoC. On RISC-V platform,
+	  the system has started RISCV_TIMER, but you can also use this timer
+	  which can provide four channels to do a lot more things on JH7110 SoC.
+
 config CLINT_TIMER
 	bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK && RISCV
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 368c3461dab8..b66ac05ec086 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -80,6 +80,7 @@  obj-$(CONFIG_INGENIC_TIMER)		+= ingenic-timer.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
 obj-$(CONFIG_RISCV_TIMER)		+= timer-riscv.o
+obj-$(CONFIG_STARFIVE_JH7110_TIMER)	+= timer-jh7110.o
 obj-$(CONFIG_CLINT_TIMER)		+= timer-clint.o
 obj-$(CONFIG_CSKY_MP_TIMER)		+= timer-mp-csky.o
 obj-$(CONFIG_GX6605S_TIMER)		+= timer-gx6605s.o
diff --git a/drivers/clocksource/timer-jh7110.c b/drivers/clocksource/timer-jh7110.c
new file mode 100644
index 000000000000..914424368290
--- /dev/null
+++ b/drivers/clocksource/timer-jh7110.c
@@ -0,0 +1,387 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Starfive JH7110 Timer driver
+ *
+ * Copyright (C) 2022-2023 StarFive Technology Co., Ltd.
+ *
+ * Author:
+ * Xingyu Wu <xingyu.wu@starfivetech.com>
+ * Samin Guo <samin.guo@starfivetech.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/sched_clock.h>
+
+/* Bias: Ch0-0x0, Ch1-0x40, Ch2-0x80, and so on. */
+#define JH7110_TIMER_CH_LEN		0x40
+#define JH7110_TIMER_CH_BASE(x)		((x) * JH7110_TIMER_CH_LEN)
+#define JH7110_TIMER_CH_MAX		4
+
+#define JH7110_CLOCK_SOURCE_RATING	200
+#define JH7110_VALID_BITS		32
+#define JH7110_DELAY_US			0
+#define JH7110_TIMEOUT_US		10000
+#define JH7110_CLOCKEVENT_RATING	300
+#define JH7110_TIMER_MAX_TICKS		0xffffffff
+#define JH7110_TIMER_MIN_TICKS		0xf
+#define JH7110_TIMER_NAME_NUM		19
+
+#define JH7110_TIMER_INT_STATUS		0x00 /* RO[0:4]: Interrupt Status for channel0~4 */
+#define JH7110_TIMER_CTL		0x04 /* RW[0]: 0-continuous run, 1-single run */
+#define JH7110_TIMER_LOAD		0x08 /* RW: load value to counter */
+#define JH7110_TIMER_ENABLE		0x10 /* RW[0]: timer enable register */
+#define JH7110_TIMER_RELOAD		0x14 /* RW: write 1 or 0 both reload counter */
+#define JH7110_TIMER_VALUE		0x18 /* RO: timer value register */
+#define JH7110_TIMER_INT_CLR		0x20 /* RW: timer interrupt clear register */
+#define JH7110_TIMER_INT_MASK		0x24 /* RW[0]: timer interrupt mask register */
+#define JH7110_TIMER_INT_CLR_AVA_MASK	BIT(1)
+
+struct jh7110_clkevt {
+	struct clock_event_device evt;
+	struct clocksource cs;
+	struct clk *clk;
+	char name[JH7110_TIMER_NAME_NUM];
+	int irq;
+	u32 rate;
+	u32 reload_val;
+	void __iomem *base;
+};
+
+static inline struct jh7110_clkevt *to_jh7110_clkevt(struct clock_event_device *evt)
+{
+	return container_of(evt, struct jh7110_clkevt, evt);
+}
+
+/* 0:continuous-run mode, 1:single-run mode */
+static inline void jh7110_timer_set_continuous_mod(struct jh7110_clkevt *clkevt)
+{
+	writel(0, clkevt->base + JH7110_TIMER_CTL);
+}
+
+static inline void jh7110_timer_set_single_mod(struct jh7110_clkevt *clkevt)
+{
+	writel(1, clkevt->base + JH7110_TIMER_CTL);
+}
+
+/* Interrupt Mask Register, 0:Unmask, 1:Mask */
+static inline void jh7110_timer_int_enable(struct jh7110_clkevt *clkevt)
+{
+	writel(0, clkevt->base + JH7110_TIMER_INT_MASK);
+}
+
+static inline void jh7110_timer_int_disable(struct jh7110_clkevt *clkevt)
+{
+	writel(1, clkevt->base + JH7110_TIMER_INT_MASK);
+}
+
+/*
+ * BIT(0): Read value represent channel intr status.
+ * Write 1 to this bit to clear interrupt. Write 0 has no effects.
+ * BIT(1): "1" means that it is clearing interrupt. BIT(0) can not be written.
+ */
+static inline int jh7110_timer_int_clear(struct jh7110_clkevt *clkevt)
+{
+	u32 value;
+	int ret;
+
+	/* waiting interrupt can be to clearing */
+	ret = readl_poll_timeout_atomic(clkevt->base + JH7110_TIMER_INT_CLR, value,
+					!(value & JH7110_TIMER_INT_CLR_AVA_MASK),
+					JH7110_DELAY_US, JH7110_TIMEOUT_US);
+	if (!ret)
+		writel(0x1, clkevt->base + JH7110_TIMER_INT_CLR);
+
+	return ret;
+}
+
+/*
+ * The initial value to be loaded into the
+ * counter and is also used as the reload value.
+ * val = clock rate --> 1s
+ */
+static inline void jh7110_timer_set_load(struct jh7110_clkevt *clkevt, u32 val)
+{
+	writel(val, clkevt->base + JH7110_TIMER_LOAD);
+}
+
+static inline u32 jh7110_timer_get_val(struct jh7110_clkevt *clkevt)
+{
+	return readl(clkevt->base + JH7110_TIMER_VALUE);
+}
+
+/*
+ * Write RELOAD register to reload preset value to counter.
+ * Write 0 and write 1 are both ok.
+ */
+static inline void jh7110_timer_set_reload(struct jh7110_clkevt *clkevt)
+{
+	writel(0, clkevt->base + JH7110_TIMER_RELOAD);
+}
+
+static inline void jh7110_timer_enable(struct jh7110_clkevt *clkevt)
+{
+	writel(1, clkevt->base + JH7110_TIMER_ENABLE);
+}
+
+static inline void jh7110_timer_disable(struct jh7110_clkevt *clkevt)
+{
+	writel(0, clkevt->base + JH7110_TIMER_ENABLE);
+}
+
+static int jh7110_timer_int_init_enable(struct jh7110_clkevt *clkevt)
+{
+	int ret;
+
+	jh7110_timer_int_disable(clkevt);
+	ret = jh7110_timer_int_clear(clkevt);
+	if (ret)
+		return ret;
+
+	jh7110_timer_int_enable(clkevt);
+	jh7110_timer_enable(clkevt);
+
+	return 0;
+}
+
+static int jh7110_timer_shutdown(struct clock_event_device *evt)
+{
+	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
+
+	jh7110_timer_disable(clkevt);
+	return jh7110_timer_int_clear(clkevt);
+}
+
+static void jh7110_timer_suspend(struct clock_event_device *evt)
+{
+	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
+
+	clkevt->reload_val = jh7110_timer_get_val(clkevt);
+	jh7110_timer_shutdown(evt);
+}
+
+static void jh7110_timer_resume(struct clock_event_device *evt)
+{
+	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
+
+	jh7110_timer_set_load(clkevt, clkevt->reload_val);
+	jh7110_timer_set_reload(clkevt);
+	jh7110_timer_int_enable(clkevt);
+	jh7110_timer_enable(clkevt);
+}
+
+static int jh7110_timer_tick_resume(struct clock_event_device *evt)
+{
+	jh7110_timer_resume(evt);
+
+	return 0;
+}
+
+/* IRQ handler for the timer */
+static irqreturn_t jh7110_timer_interrupt(int irq, void *priv)
+{
+	struct clock_event_device *evt = (struct clock_event_device *)priv;
+	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
+
+	if (jh7110_timer_int_clear(clkevt))
+		return IRQ_NONE;
+
+	if (evt->event_handler)
+		evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static int jh7110_timer_set_periodic(struct clock_event_device *evt)
+{
+	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
+	u32 periodic = DIV_ROUND_CLOSEST(clkevt->rate, HZ);
+
+	jh7110_timer_disable(clkevt);
+	jh7110_timer_set_continuous_mod(clkevt);
+	jh7110_timer_set_load(clkevt, periodic);
+
+	return jh7110_timer_int_init_enable(clkevt);
+}
+
+static int jh7110_timer_set_oneshot(struct clock_event_device *evt)
+{
+	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
+
+	jh7110_timer_disable(clkevt);
+	jh7110_timer_set_single_mod(clkevt);
+	jh7110_timer_set_load(clkevt, JH7110_TIMER_MAX_TICKS);
+
+	return jh7110_timer_int_init_enable(clkevt);
+}
+
+static int jh7110_timer_set_next_event(unsigned long next,
+				       struct clock_event_device *evt)
+{
+	struct jh7110_clkevt *clkevt = to_jh7110_clkevt(evt);
+
+	jh7110_timer_disable(clkevt);
+	jh7110_timer_set_single_mod(clkevt);
+	jh7110_timer_set_load(clkevt, next);
+	jh7110_timer_enable(clkevt);
+
+	return 0;
+}
+
+static void jh7110_set_clockevent(struct clock_event_device *evt)
+{
+	evt->features = CLOCK_EVT_FEAT_PERIODIC |
+			CLOCK_EVT_FEAT_ONESHOT |
+			CLOCK_EVT_FEAT_DYNIRQ;
+	evt->set_state_shutdown = jh7110_timer_shutdown;
+	evt->set_state_periodic = jh7110_timer_set_periodic;
+	evt->set_state_oneshot = jh7110_timer_set_oneshot;
+	evt->set_state_oneshot_stopped = jh7110_timer_shutdown;
+	evt->tick_resume = jh7110_timer_tick_resume;
+	evt->set_next_event = jh7110_timer_set_next_event;
+	evt->suspend = jh7110_timer_suspend;
+	evt->resume = jh7110_timer_resume;
+	evt->rating = JH7110_CLOCKEVENT_RATING;
+}
+
+static u64 jh7110_timer_clocksource_read(struct clocksource *cs)
+{
+	struct jh7110_clkevt *clkevt = container_of(cs, struct jh7110_clkevt, cs);
+
+	return (u64)jh7110_timer_get_val(clkevt);
+}
+
+static int jh7110_clocksource_init(struct jh7110_clkevt *clkevt)
+{
+	int ret;
+
+	jh7110_timer_set_continuous_mod(clkevt);
+	jh7110_timer_set_load(clkevt, JH7110_TIMER_MAX_TICKS);
+
+	ret = jh7110_timer_int_init_enable(clkevt);
+	if (ret)
+		return ret;
+
+	clkevt->cs.name = clkevt->name;
+	clkevt->cs.rating = JH7110_CLOCK_SOURCE_RATING;
+	clkevt->cs.read = jh7110_timer_clocksource_read;
+	clkevt->cs.mask = CLOCKSOURCE_MASK(JH7110_VALID_BITS);
+	clkevt->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+
+	return clocksource_register_hz(&clkevt->cs, clkevt->rate);
+}
+
+static void jh7110_clockevents_register(struct jh7110_clkevt *clkevt)
+{
+	clkevt->rate = clk_get_rate(clkevt->clk);
+
+	jh7110_set_clockevent(&clkevt->evt);
+	clkevt->evt.name = clkevt->name;
+	clkevt->evt.cpumask = cpu_possible_mask;
+
+	clockevents_config_and_register(&clkevt->evt, clkevt->rate,
+					JH7110_TIMER_MIN_TICKS, JH7110_TIMER_MAX_TICKS);
+}
+
+static int jh7110_timer_probe(struct platform_device *pdev)
+{
+	struct jh7110_clkevt *clkevt[JH7110_TIMER_CH_MAX];
+	char name[4];
+	struct clk *pclk;
+	struct reset_control *rst;
+	int ch;
+	int ret;
+	void __iomem *base;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return dev_err_probe(&pdev->dev, PTR_ERR(base),
+				     "failed to map registers\n");
+
+	rst = devm_reset_control_get_exclusive(&pdev->dev, "apb");
+	if (IS_ERR(rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rst), "failed to get apb reset\n");
+
+	pclk = devm_clk_get_enabled(&pdev->dev, "apb");
+	if (IS_ERR(pclk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pclk),
+				     "failed to get & enable apb clock\n");
+
+	ret = reset_control_deassert(rst);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "failed to deassert apb reset\n");
+
+	for (ch = 0; ch < JH7110_TIMER_CH_MAX; ch++) {
+		clkevt[ch] = devm_kzalloc(&pdev->dev, sizeof(*clkevt[ch]), GFP_KERNEL);
+		if (!clkevt[ch])
+			return -ENOMEM;
+
+		snprintf(name, sizeof(name), "ch%d", ch);
+
+		clkevt[ch]->base = base + JH7110_TIMER_CH_BASE(ch);
+		/* Ensure timer is disabled */
+		jh7110_timer_disable(clkevt[ch]);
+
+		rst = devm_reset_control_get_exclusive(&pdev->dev, name);
+		if (IS_ERR(rst))
+			return PTR_ERR(rst);
+
+		clkevt[ch]->clk = devm_clk_get_enabled(&pdev->dev, name);
+		if (IS_ERR(clkevt[ch]->clk))
+			return PTR_ERR(clkevt[ch]->clk);
+
+		ret = reset_control_deassert(rst);
+		if (ret)
+			return ret;
+
+		clkevt[ch]->evt.irq = platform_get_irq(pdev, ch);
+		if (clkevt[ch]->evt.irq < 0)
+			return clkevt[ch]->evt.irq;
+
+		snprintf(clkevt[ch]->name, sizeof(clkevt[ch]->name), "%s.ch%d", pdev->name, ch);
+		jh7110_clockevents_register(clkevt[ch]);
+
+		ret = devm_request_irq(&pdev->dev, clkevt[ch]->evt.irq, jh7110_timer_interrupt,
+				       IRQF_TIMER | IRQF_IRQPOLL,
+				       clkevt[ch]->name, &clkevt[ch]->evt);
+		if (ret)
+			return ret;
+
+		ret = jh7110_clocksource_init(clkevt[ch]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id jh7110_timer_match[] = {
+	{ .compatible = "starfive,jh7110-timer", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jh7110_timer_match);
+
+static struct platform_driver jh7110_timer_driver = {
+	.probe = jh7110_timer_probe,
+	.driver = {
+		.name = "jh7110-timer",
+		.of_match_table = jh7110_timer_match,
+	},
+};
+module_platform_driver(jh7110_timer_driver);
+
+MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
+MODULE_DESCRIPTION("StarFive JH7110 timer driver");
+MODULE_LICENSE("GPL");