diff mbox series

[v3,2/3] dt-bindings: mtd: binman-partition: Add binman compatibles

Message ID 20231009201005.1964794-2-sjg@chromium.org
State Superseded
Headers show
Series [v3,1/3] dt-bindings: mtd: fixed-partitions: Add binman compatible | expand

Commit Message

Simon Glass Oct. 9, 2023, 8:10 p.m. UTC
Add two compatible for binman entries, as a starting point for the
schema.

Note that, after discussion on v2, we decided to keep the existing
meaning of label so as not to require changes to existing userspace
software when moving to use binman nodes to specify the firmware
layout.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

Changes in v3:
- Drop fixed-partitions from the example
- Use compatible instead of label

Changes in v2:
- Use plain partition@xxx for the node name

 .../mtd/partitions/binman-partition.yaml      | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/partitions/binman-partition.yaml

Comments

Simon Glass Oct. 9, 2023, 10:02 p.m. UTC | #1
Hi Rob,

On Mon, 9 Oct 2023 at 15:18, Rob Herring <robh@kernel.org> wrote:
>
>
> On Mon, 09 Oct 2023 14:10:00 -0600, Simon Glass wrote:
> > Add two compatible for binman entries, as a starting point for the
> > schema.
> >
> > Note that, after discussion on v2, we decided to keep the existing
> > meaning of label so as not to require changes to existing userspace
> > software when moving to use binman nodes to specify the firmware
> > layout.
> >
> > Signed-off-by: Simon Glass <sjg@chromium.org>
> > ---
> >
> > Changes in v3:
> > - Drop fixed-partitions from the example
> > - Use compatible instead of label
> >
> > Changes in v2:
> > - Use plain partition@xxx for the node name
> >
> >  .../mtd/partitions/binman-partition.yaml      | 48 +++++++++++++++++++
> >  1 file changed, 48 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mtd/partitions/binman-partition.yaml
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/partitions/binman-partition.yaml: properties:compatible:items: {'enum': ['u-boot', 'atf-bl31']} is not of type 'array'
>         from schema $id: http://devicetree.org/meta-schemas/string-array.yaml#
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231009201005.1964794-2-sjg@chromium.org
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>

Oh dear, I didn't notice that output but I see it now. Could the check
return a non-zero exit code if something goes wrong?

Anyway, I'll send v4

Regards,
Simon
Rob Herring Oct. 10, 2023, 5:06 p.m. UTC | #2
On Mon, Oct 09, 2023 at 04:02:40PM -0600, Simon Glass wrote:
> Hi Rob,
> 
> On Mon, 9 Oct 2023 at 15:18, Rob Herring <robh@kernel.org> wrote:
> >
> >
> > On Mon, 09 Oct 2023 14:10:00 -0600, Simon Glass wrote:
> > > Add two compatible for binman entries, as a starting point for the
> > > schema.
> > >
> > > Note that, after discussion on v2, we decided to keep the existing
> > > meaning of label so as not to require changes to existing userspace
> > > software when moving to use binman nodes to specify the firmware
> > > layout.
> > >
> > > Signed-off-by: Simon Glass <sjg@chromium.org>
> > > ---
> > >
> > > Changes in v3:
> > > - Drop fixed-partitions from the example
> > > - Use compatible instead of label
> > >
> > > Changes in v2:
> > > - Use plain partition@xxx for the node name
> > >
> > >  .../mtd/partitions/binman-partition.yaml      | 48 +++++++++++++++++++
> > >  1 file changed, 48 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/mtd/partitions/binman-partition.yaml
> > >
> >
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/partitions/binman-partition.yaml: properties:compatible:items: {'enum': ['u-boot', 'atf-bl31']} is not of type 'array'
> >         from schema $id: http://devicetree.org/meta-schemas/string-array.yaml#
> >
> > doc reference errors (make refcheckdocs):
> >
> > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231009201005.1964794-2-sjg@chromium.org
> >
> > The base for the series is generally the latest rc1. A different dependency
> > should be noted in *this* patch.
> >
> > If you already ran 'make dt_binding_check' and didn't see the above
> > error(s), then make sure 'yamllint' is installed and dt-schema is up to
> > date:
> >
> > pip3 install dtschema --upgrade
> >
> > Please check and re-submit after running the above command yourself. Note
> > that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> > your schema. However, it must be unset to test all examples with your schema.
> >
> 
> Oh dear, I didn't notice that output but I see it now. Could the check
> return a non-zero exit code if something goes wrong?

No, because things go wrong too often and then it breaks for everyone. 
It's better now, but only because of the above reports and 3 
maintainers.

Also, it is not fatal. The schemas are checked against the DT 
meta-schema, but are used for validation if they pass just draft2019-09 
meta-schema. That allows new DT meta-schema checks to not start 
excluding previously used schema.

Rob
Simon Glass Oct. 12, 2023, 3:40 a.m. UTC | #3
Hi Rob,

On Tue, 10 Oct 2023 at 11:06, Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Oct 09, 2023 at 04:02:40PM -0600, Simon Glass wrote:
> > Hi Rob,
> >
> > On Mon, 9 Oct 2023 at 15:18, Rob Herring <robh@kernel.org> wrote:
> > >
> > >
> > > On Mon, 09 Oct 2023 14:10:00 -0600, Simon Glass wrote:
> > > > Add two compatible for binman entries, as a starting point for the
> > > > schema.
> > > >
> > > > Note that, after discussion on v2, we decided to keep the existing
> > > > meaning of label so as not to require changes to existing userspace
> > > > software when moving to use binman nodes to specify the firmware
> > > > layout.
> > > >
> > > > Signed-off-by: Simon Glass <sjg@chromium.org>
> > > > ---
> > > >
> > > > Changes in v3:
> > > > - Drop fixed-partitions from the example
> > > > - Use compatible instead of label
> > > >
> > > > Changes in v2:
> > > > - Use plain partition@xxx for the node name
> > > >
> > > >  .../mtd/partitions/binman-partition.yaml      | 48 +++++++++++++++++++
> > > >  1 file changed, 48 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/mtd/partitions/binman-partition.yaml
> > > >
> > >
> > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> > >
> > > yamllint warnings/errors:
> > >
> > > dtschema/dtc warnings/errors:
> > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mtd/partitions/binman-partition.yaml: properties:compatible:items: {'enum': ['u-boot', 'atf-bl31']} is not of type 'array'
> > >         from schema $id: http://devicetree.org/meta-schemas/string-array.yaml#
> > >
> > > doc reference errors (make refcheckdocs):
> > >
> > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231009201005.1964794-2-sjg@chromium.org
> > >
> > > The base for the series is generally the latest rc1. A different dependency
> > > should be noted in *this* patch.
> > >
> > > If you already ran 'make dt_binding_check' and didn't see the above
> > > error(s), then make sure 'yamllint' is installed and dt-schema is up to
> > > date:
> > >
> > > pip3 install dtschema --upgrade
> > >
> > > Please check and re-submit after running the above command yourself. Note
> > > that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> > > your schema. However, it must be unset to test all examples with your schema.
> > >
> >
> > Oh dear, I didn't notice that output but I see it now. Could the check
> > return a non-zero exit code if something goes wrong?
>
> No, because things go wrong too often and then it breaks for everyone.
> It's better now, but only because of the above reports and 3
> maintainers.
>
> Also, it is not fatal. The schemas are checked against the DT
> meta-schema, but are used for validation if they pass just draft2019-09
> meta-schema. That allows new DT meta-schema checks to not start
> excluding previously used schema.

OK I see. Another suggestion would be to remove non-warning output.
Perhaps I can do that with make -s though.

Regards,
Simon
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/partitions/binman-partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/binman-partition.yaml
new file mode 100644
index 000000000000..754f804524a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/binman-partition.yaml
@@ -0,0 +1,48 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Google LLC
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/binman-partition.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binman partition
+
+maintainers:
+  - Simon Glass <sjg@chromium.org>
+
+select: false
+
+description: |
+  This corresponds to a binman 'entry'. It is a single partition which holds
+  data of a defined type.
+
+allOf:
+  - $ref: /schemas/mtd/partitions/partition.yaml#
+
+properties:
+  compatible:
+    items:
+      enum:
+        - u-boot       # u-boot.bin from U-Boot projec6t
+        - atf-bl31     # bl31.bin or bl31.elf from TF-A project
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "binman";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@100000 {
+            compatible = "u-boot";
+            reg = <0x100000 0xf00000>;
+        };
+
+        partition@200000 {
+            compatible = "atf-bl31";
+            reg = <0x200000 0x100000>;
+        };
+    };