| Message ID | 20231010111723.17524-2-vaishnav.a@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: ti: k3-j721s2/j784s4: Add CSI BCDMA nodes | expand |
On 10/10/23 16:47, Vaishnav Achath wrote: > J721S2 has a dedicated BCDMA controller for the Camera Serial Interface. > Events from the BCDMA controller instance are routed through the > main UDMA interrupt aggregator as unmapped events. Add the node for > the DMA controller and keep it disabled by default. > > See J721S2 Technical Reference Manual (SPRUJ28) > for further details: http://www.ti.com/lit/pdf/spruj28 > > Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> > --- > > V1->V2: > * Fix indentation for the reg entries. > > arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi > index 6d32544c8881..d5d13d61ade3 100644 > --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi > @@ -807,6 +807,7 @@ > ti,sci = <&sms>; > ti,sci-dev-id = <265>; > ti,interrupt-ranges = <0 0 256>; > + ti,unmapped-event-sources = <&main_bcdma_csi>; > }; > > secure_proxy_main: mailbox@32c00000 { > @@ -1103,6 +1104,22 @@ > ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ > }; > > + main_bcdma_csi: dma-controller@311a0000 { > + compatible = "ti,j721s2-dmss-bcdma-csi"; > + reg = <0x00 0x311a0000 0x00 0x100>, > + <0x00 0x35d00000 0x00 0x20000>, > + <0x00 0x35c00000 0x00 0x10000>, > + <0x00 0x35e00000 0x00 0x80000>; > + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; > + msi-parent = <&main_udmass_inta>; > + #dma-cells = <3>; > + ti,sci = <&sms>; > + ti,sci-dev-id = <225>; > + ti,sci-rm-range-rchan = <0x21>; > + ti,sci-rm-range-tchan = <0x22>; > + status = "disabled"; > + }; > + Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com> Warm Regards. > cpts@310d0000 { > compatible = "ti,j721e-cpts"; > reg = <0x0 0x310d0000 0x0 0x400>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 6d32544c8881..d5d13d61ade3 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -807,6 +807,7 @@ ti,sci = <&sms>; ti,sci-dev-id = <265>; ti,interrupt-ranges = <0 0 256>; + ti,unmapped-event-sources = <&main_bcdma_csi>; }; secure_proxy_main: mailbox@32c00000 { @@ -1103,6 +1104,22 @@ ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ }; + main_bcdma_csi: dma-controller@311a0000 { + compatible = "ti,j721s2-dmss-bcdma-csi"; + reg = <0x00 0x311a0000 0x00 0x100>, + <0x00 0x35d00000 0x00 0x20000>, + <0x00 0x35c00000 0x00 0x10000>, + <0x00 0x35e00000 0x00 0x80000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <3>; + ti,sci = <&sms>; + ti,sci-dev-id = <225>; + ti,sci-rm-range-rchan = <0x21>; + ti,sci-rm-range-tchan = <0x22>; + status = "disabled"; + }; + cpts@310d0000 { compatible = "ti,j721e-cpts"; reg = <0x0 0x310d0000 0x0 0x400>;
J721S2 has a dedicated BCDMA controller for the Camera Serial Interface. Events from the BCDMA controller instance are routed through the main UDMA interrupt aggregator as unmapped events. Add the node for the DMA controller and keep it disabled by default. See J721S2 Technical Reference Manual (SPRUJ28) for further details: http://www.ti.com/lit/pdf/spruj28 Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> --- V1->V2: * Fix indentation for the reg entries. arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)