diff mbox series

[09/36] gpio: mvebu: use new pinctrl GPIO helpers

Message ID 20231003145114.21637-10-brgl@bgdev.pl
State Superseded
Headers show
Series pinctrl: don't use GPIOLIB global numberspace in helpers | expand

Commit Message

Bartosz Golaszewski Oct. 3, 2023, 2:50 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/gpio/gpio-mvebu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Uwe Kleine-König Oct. 9, 2023, 9:44 a.m. UTC | #1
Hello Bartosz,

On Tue, Oct 03, 2023 at 04:50:47PM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Replace the pinctrl helpers taking the global GPIO number as argument
> with the improved variants that instead take a pointer to the GPIO chip
> and the controller-relative offset.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Looks good (after I found the cover letter which luckily is easy).

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Best regards
Uwe
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 67497116ce27..8fada9cd258a 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -345,7 +345,7 @@  static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned int pin)
 	 * Check with the pinctrl driver whether this pin is usable as
 	 * an input GPIO
 	 */
-	ret = pinctrl_gpio_direction_input(chip->base + pin);
+	ret = pinctrl_gpio_direction_input_new(chip, pin);
 	if (ret)
 		return ret;
 
@@ -365,7 +365,7 @@  static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned int pin,
 	 * Check with the pinctrl driver whether this pin is usable as
 	 * an output GPIO
 	 */
-	ret = pinctrl_gpio_direction_output(chip->base + pin);
+	ret = pinctrl_gpio_direction_output_new(chip, pin);
 	if (ret)
 		return ret;