| Message ID | 1323690426-6267-2-git-send-email-dave.martin@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
On Mon, Dec 12, 2011 at 11:47:05AM +0000, Dave Martin wrote: > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index 724ec0f..c4c9acf 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -17,6 +17,7 @@ choice > > config ARCH_EXYNOS4 > bool "SAMSUNG EXYNOS4" > + select CACHE_L2X0 Doesn't this need to select HAVE_L2X0_L2CC as well? > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index 5f7f9c2..4234937 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -609,12 +609,12 @@ comment "i.MX6 family:" > config SOC_IMX6Q > bool "i.MX6 Quad support" > select ARM_GIC > - select CACHE_L2X0 > select CPU_V7 > select HAVE_ARM_SCU > select HAVE_IMX_GPC > select HAVE_IMX_MMDC > select HAVE_IMX_SRC > + select HAVE_L2X0_L2CC Do you know enough about this to make L2 cache support optional on this SoC? > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index 5034147..0358159 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -44,6 +44,7 @@ config ARCH_OMAP4 > select CPU_V7 > select ARM_GIC > select LOCAL_TIMERS if SMP > + select CACHE_L2X0 HAVE_L2X0_L2CC ?
On Mon, Dec 12, 2011 at 02:08:37PM +0000, Russell King - ARM Linux wrote: > On Mon, Dec 12, 2011 at 11:47:05AM +0000, Dave Martin wrote: > > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > > index 724ec0f..c4c9acf 100644 > > --- a/arch/arm/mach-exynos/Kconfig > > +++ b/arch/arm/mach-exynos/Kconfig > > @@ -17,6 +17,7 @@ choice > > > > config ARCH_EXYNOS4 > > bool "SAMSUNG EXYNOS4" > > + select CACHE_L2X0 > > Doesn't this need to select HAVE_L2X0_L2CC as well? Probably not -- due to a moment of madness, it looks like I somehow mistranslated "highbank" as "exynos4". For highbank, Rob Herring thinks that direct selection of CACHE_L2X0 is needed [1]. I will re-roll the patch to fix this. This may apply to other platforms too; but if they are not already selecting CACHE_L2X0 directly, this series will make the situation no worse. > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > > index 5f7f9c2..4234937 100644 > > --- a/arch/arm/mach-imx/Kconfig > > +++ b/arch/arm/mach-imx/Kconfig > > @@ -609,12 +609,12 @@ comment "i.MX6 family:" > > config SOC_IMX6Q > > bool "i.MX6 Quad support" > > select ARM_GIC > > - select CACHE_L2X0 > > select CPU_V7 > > select HAVE_ARM_SCU > > select HAVE_IMX_GPC > > select HAVE_IMX_MMDC > > select HAVE_IMX_SRC > > + select HAVE_L2X0_L2CC > > Do you know enough about this to make L2 cache support optional on this SoC? No. But Shawn Guo suggested that this correct [2] > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > > index 5034147..0358159 100644 > > --- a/arch/arm/mach-omap2/Kconfig > > +++ b/arch/arm/mach-omap2/Kconfig > > @@ -44,6 +44,7 @@ config ARCH_OMAP4 > > select CPU_V7 > > select ARM_GIC > > select LOCAL_TIMERS if SMP > > + select CACHE_L2X0 > > HAVE_L2X0_L2CC ? Rob Herring thinks not [1] Cheers ---Dave [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074495.html [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074602.html
On Mon, Dec 12, 2011 at 02:08:37PM +0000, Russell King - ARM Linux wrote: > On Mon, Dec 12, 2011 at 11:47:05AM +0000, Dave Martin wrote: > > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > > index 724ec0f..c4c9acf 100644 > > --- a/arch/arm/mach-exynos/Kconfig > > +++ b/arch/arm/mach-exynos/Kconfig > > @@ -17,6 +17,7 @@ choice > > > > config ARCH_EXYNOS4 > > bool "SAMSUNG EXYNOS4" > > + select CACHE_L2X0 > > Doesn't this need to select HAVE_L2X0_L2CC as well? > > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > > index 5f7f9c2..4234937 100644 > > --- a/arch/arm/mach-imx/Kconfig > > +++ b/arch/arm/mach-imx/Kconfig > > @@ -609,12 +609,12 @@ comment "i.MX6 family:" > > config SOC_IMX6Q > > bool "i.MX6 Quad support" > > select ARM_GIC > > - select CACHE_L2X0 > > select CPU_V7 > > select HAVE_ARM_SCU > > select HAVE_IMX_GPC > > select HAVE_IMX_MMDC > > select HAVE_IMX_SRC > > + select HAVE_L2X0_L2CC > > Do you know enough about this to make L2 cache support optional on this SoC? > > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > > index 5034147..0358159 100644 > > --- a/arch/arm/mach-omap2/Kconfig > > +++ b/arch/arm/mach-omap2/Kconfig > > @@ -44,6 +44,7 @@ config ARCH_OMAP4 > > select CPU_V7 > > select ARM_GIC > > select LOCAL_TIMERS if SMP > > + select CACHE_L2X0 > > HAVE_L2X0_L2CC ? I've just asked Rob this, but you may have a view -- Should we avoid changing any actual behaviour in this patch? If so then yes, we should add HAVE_L2X0_L2CC for everything previously depended on by CACHE_L2X0. If this is actually wrong, and not building the L2x0 support for certain boards doesn't make sense (as seems to be the case for some boards), then it would be up to those boards' maintainers to fix that in subsequent patches if they care about it. Alternatively, I could add the extra "select CACHE_L2X0" modifications in a separate patch and append it to the series (contingent of Acks from the relevant maintainers). Either route seems preferable to doing those changes in a patch which claims just to be refactoring. Cheers ---Dave
On Mon, Dec 12, 2011 at 03:01:58PM +0000, Dave Martin wrote: > On Mon, Dec 12, 2011 at 02:08:37PM +0000, Russell King - ARM Linux wrote: > > On Mon, Dec 12, 2011 at 11:47:05AM +0000, Dave Martin wrote: > > > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > > > index 724ec0f..c4c9acf 100644 > > > --- a/arch/arm/mach-exynos/Kconfig > > > +++ b/arch/arm/mach-exynos/Kconfig > > > @@ -17,6 +17,7 @@ choice > > > > > > config ARCH_EXYNOS4 > > > bool "SAMSUNG EXYNOS4" > > > + select CACHE_L2X0 > > > > Doesn't this need to select HAVE_L2X0_L2CC as well? > > Probably not -- due to a moment of madness, it looks like I somehow > mistranslated "highbank" as "exynos4". Well, you have CACHE_L2X0 depending on HAVE_L2X0_L2CC. Selecting CACHE_L2X0 without HAVE_L2X0_L2CC being selected will make Kconfig produce a message about unmet dependencies. The other solution to this is: config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" if HAVE_L2X0_L2CC and I think that's more in keeping with what Rob mentioned in his message - it makes this a non-user selectable option unless HAVE_L2X0_L2CC is enabled. However, in this case it would be more sensible to name the option 'MIGHT_HAVE_CACHE_L2X0'. (btw, please name the option after the option it relates to.) > > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > > > index 5f7f9c2..4234937 100644 > > > --- a/arch/arm/mach-imx/Kconfig > > > +++ b/arch/arm/mach-imx/Kconfig > > > @@ -609,12 +609,12 @@ comment "i.MX6 family:" > > > config SOC_IMX6Q > > > bool "i.MX6 Quad support" > > > select ARM_GIC > > > - select CACHE_L2X0 > > > select CPU_V7 > > > select HAVE_ARM_SCU > > > select HAVE_IMX_GPC > > > select HAVE_IMX_MMDC > > > select HAVE_IMX_SRC > > > + select HAVE_L2X0_L2CC > > > > Do you know enough about this to make L2 cache support optional on this SoC? > > No. But Shawn Guo suggested that this correct [2] Ok.
On Mon, Dec 12, 2011 at 04:04:37PM +0000, Russell King - ARM Linux wrote: > On Mon, Dec 12, 2011 at 03:01:58PM +0000, Dave Martin wrote: > > On Mon, Dec 12, 2011 at 02:08:37PM +0000, Russell King - ARM Linux wrote: > > > On Mon, Dec 12, 2011 at 11:47:05AM +0000, Dave Martin wrote: > > > > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > > > > index 724ec0f..c4c9acf 100644 > > > > --- a/arch/arm/mach-exynos/Kconfig > > > > +++ b/arch/arm/mach-exynos/Kconfig > > > > @@ -17,6 +17,7 @@ choice > > > > > > > > config ARCH_EXYNOS4 > > > > bool "SAMSUNG EXYNOS4" > > > > + select CACHE_L2X0 > > > > > > Doesn't this need to select HAVE_L2X0_L2CC as well? > > > > Probably not -- due to a moment of madness, it looks like I somehow > > mistranslated "highbank" as "exynos4". > > Well, you have CACHE_L2X0 depending on HAVE_L2X0_L2CC. Selecting > CACHE_L2X0 without HAVE_L2X0_L2CC being selected will make Kconfig > produce a message about unmet dependencies. > > The other solution to this is: > > config CACHE_L2X0 > bool "Enable the L2x0 outer cache controller" if HAVE_L2X0_L2CC > > and I think that's more in keeping with what Rob mentioned in his > message - it makes this a non-user selectable option unless > HAVE_L2X0_L2CC is enabled. > > However, in this case it would be more sensible to name the option > 'MIGHT_HAVE_CACHE_L2X0'. (btw, please name the option after the > option it relates to.) We still want CACHE_L2X0 to default to y even in the MIGHT_HAVE_CACHE_L2X0 case, since it is not usually desirable to turn it off except for debugging purposes. Would the correct thing be: config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0 default MIGHT_HAVE_CACHE_L2X0 That way, select CACHE_L2X0=y, MIGHT_HAVE_CACHE_L2X0=y and both=y will all produce sensible results, if I understand correctly how this works. ...or is there a better way? In the meantime, I will separate the pure refactoring from the other changes. Cheers ---Dave
On Mon, Dec 12, 2011 at 04:53:23PM +0000, Dave Martin wrote: > On Mon, Dec 12, 2011 at 04:04:37PM +0000, Russell King - ARM Linux wrote: > > On Mon, Dec 12, 2011 at 03:01:58PM +0000, Dave Martin wrote: > > > On Mon, Dec 12, 2011 at 02:08:37PM +0000, Russell King - ARM Linux wrote: > > > > On Mon, Dec 12, 2011 at 11:47:05AM +0000, Dave Martin wrote: > > > > > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > > > > > index 724ec0f..c4c9acf 100644 > > > > > --- a/arch/arm/mach-exynos/Kconfig > > > > > +++ b/arch/arm/mach-exynos/Kconfig > > > > > @@ -17,6 +17,7 @@ choice > > > > > > > > > > config ARCH_EXYNOS4 > > > > > bool "SAMSUNG EXYNOS4" > > > > > + select CACHE_L2X0 > > > > > > > > Doesn't this need to select HAVE_L2X0_L2CC as well? > > > > > > Probably not -- due to a moment of madness, it looks like I somehow > > > mistranslated "highbank" as "exynos4". > > > > Well, you have CACHE_L2X0 depending on HAVE_L2X0_L2CC. Selecting > > CACHE_L2X0 without HAVE_L2X0_L2CC being selected will make Kconfig > > produce a message about unmet dependencies. > > > > The other solution to this is: > > > > config CACHE_L2X0 > > bool "Enable the L2x0 outer cache controller" if HAVE_L2X0_L2CC > > > > and I think that's more in keeping with what Rob mentioned in his > > message - it makes this a non-user selectable option unless > > HAVE_L2X0_L2CC is enabled. > > > > However, in this case it would be more sensible to name the option > > 'MIGHT_HAVE_CACHE_L2X0'. (btw, please name the option after the > > option it relates to.) > > We still want CACHE_L2X0 to default to y even in the > MIGHT_HAVE_CACHE_L2X0 case, since it is not usually desirable to turn it > off except for debugging purposes. > > Would the correct thing be: > > config CACHE_L2X0 > bool "Enable the L2x0 outer cache controller" if MIGHT_HAVE_CACHE_L2X0 > default MIGHT_HAVE_CACHE_L2X0 > > That way, select CACHE_L2X0=y, MIGHT_HAVE_CACHE_L2X0=y and both=y will > all produce sensible results, if I understand correctly how this works. > > ...or is there a better way? I think that's a good compromise (and improvement).
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 44789ef..a7e621e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -344,6 +344,7 @@ config ARCH_HIGHBANK select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU + select HAVE_L2X0_L2CC select USE_OF help Support for the Calxeda Highbank SoC based boards. @@ -361,6 +362,7 @@ config ARCH_CNS3XXX select CPU_V6K select GENERIC_CLOCKEVENTS select ARM_GIC + select HAVE_L2X0_L2CC select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help @@ -377,6 +379,7 @@ config ARCH_GEMINI config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" select CPU_V7 + select HAVE_L2X0_L2CC select NO_IOPORT select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP @@ -632,6 +635,7 @@ config ARCH_TEGRA select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_CLK + select HAVE_L2X0_L2CC select HAVE_SCHED_CLOCK select ARCH_HAS_CPUFREQ help @@ -701,6 +705,7 @@ config ARCH_SHMOBILE bool "Renesas SH-Mobile / R-Mobile" select HAVE_CLK select CLKDEV_LOOKUP + select HAVE_L2X0_L2CC select HAVE_MACH_CLKDEV select GENERIC_CLOCKEVENTS select NO_IOPORT @@ -900,6 +905,7 @@ config ARCH_U8500 bool "ST-Ericsson U8500 Series" select CPU_V7 select ARM_AMBA + select HAVE_L2X0_L2CC select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP select ARCH_REQUIRE_GPIOLIB @@ -912,6 +918,7 @@ config ARCH_NOMADIK select ARM_AMBA select ARM_VIC select CPU_ARM926T + select HAVE_L2X0_L2CC select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB @@ -972,6 +979,7 @@ config ARCH_ZYNQ select CLKDEV_LOOKUP select ARM_GIC select ARM_AMBA + select HAVE_L2X0_L2CC select ICST select USE_OF help diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 724ec0f..c4c9acf 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -17,6 +17,7 @@ choice config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" + select CACHE_L2X0 help Samsung EXYNOS4 SoCs based systems diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 5f7f9c2..4234937 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -609,12 +609,12 @@ comment "i.MX6 family:" config SOC_IMX6Q bool "i.MX6 Quad support" select ARM_GIC - select CACHE_L2X0 select CPU_V7 select HAVE_ARM_SCU select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC + select HAVE_L2X0_L2CC select USE_OF help diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5034147..0358159 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -44,6 +44,7 @@ config ARCH_OMAP4 select CPU_V7 select ARM_GIC select LOCAL_TIMERS if SMP + select CACHE_L2X0 select PL310_ERRATA_588369 select PL310_ERRATA_727915 select ARM_ERRATA_720789 diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index dba6d0c..3dfd6b8 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -12,6 +12,7 @@ config REALVIEW_EB_A9MP bool "Support Multicore Cortex-A9 Tile" depends on MACH_REALVIEW_EB select CPU_V7 + select HAVE_L2X0_L2CC help Enable support for the Cortex-A9MPCore tile fitted to the Realview(R) Emulation Baseboard platform. @@ -20,6 +21,7 @@ config REALVIEW_EB_ARM11MP bool "Support ARM11MPCore Tile" depends on MACH_REALVIEW_EB select CPU_V6K + select HAVE_L2X0_L2CC select ARCH_HAS_BARRIERS if SMP help Enable support for the ARM11MPCore tile fitted to the Realview(R) @@ -38,6 +40,7 @@ config MACH_REALVIEW_PB11MP bool "Support RealView(R) Platform Baseboard for ARM11MPCore" select CPU_V6K select ARM_GIC + select HAVE_L2X0_L2CC select HAVE_PATA_PLATFORM select ARCH_HAS_BARRIERS if SMP help @@ -50,6 +53,7 @@ config MACH_REALVIEW_PB1176 bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" select CPU_V6 select ARM_GIC + select HAVE_L2X0_L2CC select HAVE_TCM help Include support for the ARM(R) RealView(R) Platform Baseboard for @@ -77,6 +81,7 @@ config MACH_REALVIEW_PBA8 config MACH_REALVIEW_PBX bool "Support RealView(R) Platform Baseboard Explore" select ARM_GIC + select HAVE_L2X0_L2CC select HAVE_PATA_PLATFORM select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ZONE_DMA if SPARSEMEM diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 9311484..d9f387e 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -8,5 +8,6 @@ config ARCH_VEXPRESS_CA9X4 select ARM_ERRATA_720789 select ARM_ERRATA_751472 select ARM_ERRATA_753970 + select HAVE_L2X0_L2CC endmenu diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 67f75a0..6e9e3e1 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -816,13 +816,15 @@ config CACHE_FEROCEON_L2_WRITETHROUGH Say Y here to use the Feroceon L2 cache in writethrough mode. Unless you specifically require this, say N for writeback mode. +config HAVE_L2X0_L2CC + bool + help + This option should be selected by machines which have a L2x0 + or PL310 cache controller. + config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" - depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ - REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \ - ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \ - ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK + depends on HAVE_L2X0_L2CC default y select OUTER_CACHE select OUTER_CACHE_SYNC diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index b3a1f2b..6871ed7 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -20,6 +20,7 @@ config ARCH_IMX_V6_V7 bool "i.MX3, i.MX6" select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT + select HAVE_L2X0_L2CC help This enables support for systems based on the Freescale i.MX3 and i.MX6 family.
Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs) is bothersome to maintain and likely to lead to merge conflicts. This patch moves the knowledge of which platforms have a L2x0 or PL310 cache controller to the individual machines. To enable this, a new HAVE_L2X0_L2CC config option is introduced to allow machines to indicate that they have such a cache controller independently of each other. Boards/SoCs which cannot reliably operate without the L2 cache controller support should select is directly from their own Kconfigs instead. This applies to some TrustZone-enabled boards where Linux runs in the Normal World. Signed-off-by: Dave Martin <dave.martin@linaro.org> --- Changes since v1: v3: no change (patch reposted as part of an extended series) v2: Respond to issues raised by Rob Herring: Get config dependencies into something resembling alphabetical order. Depend directly on CACHE_L2X0 from boards which run Linux in the Normal World and hence where the L2CC can't be turned off by Linux. Currently done for OMAP4, EXYNOS4. Get rid of redundant "default n" for HAVE_L2X0_L2CC arch/arm/Kconfig | 8 ++++++++ arch/arm/mach-exynos/Kconfig | 1 + arch/arm/mach-imx/Kconfig | 2 +- arch/arm/mach-omap2/Kconfig | 1 + arch/arm/mach-realview/Kconfig | 5 +++++ arch/arm/mach-vexpress/Kconfig | 1 + arch/arm/mm/Kconfig | 12 +++++++----- arch/arm/plat-mxc/Kconfig | 1 + 8 files changed, 25 insertions(+), 6 deletions(-)