diff mbox series

[V3,4/4] dt-bindings: ufs: qcom: Align clk binding property for Qualcomm UFS

Message ID 20230927082700.17593-1-quic_nitirawa@quicinc.com
State Superseded
Headers show
Series None | expand

Commit Message

Nitin Rawat Sept. 27, 2023, 8:27 a.m. UTC
Align the binding property for clock such that "clocks" property
comes first followed by "clock-names" property.

Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
---
 .../devicetree/bindings/ufs/qcom,ufs.yaml        | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--
2.17.1

Comments

Rob Herring (Arm) Sept. 28, 2023, 5:04 p.m. UTC | #1
On Wed, Sep 27, 2023 at 01:57:00PM +0530, Nitin Rawat wrote:
> Align the binding property for clock such that "clocks" property
> comes first followed by "clock-names" property.

Why do we care?

> 
> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> ---
>  .../devicetree/bindings/ufs/qcom,ufs.yaml        | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
> index 802640efa956..d17bdc4e934f 100644
> --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
> +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
> @@ -295,14 +295,6 @@ examples:
>                              <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
>              interconnect-names = "ufs-ddr", "cpu-ufs";
> 
> -            clock-names = "core_clk",
> -                          "bus_aggr_clk",
> -                          "iface_clk",
> -                          "core_clk_unipro",
> -                          "ref_clk",
> -                          "tx_lane0_sync_clk",
> -                          "rx_lane0_sync_clk",
> -                          "rx_lane1_sync_clk";
>              clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
>                       <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
>                       <&gcc GCC_UFS_PHY_AHB_CLK>,
> @@ -311,6 +303,14 @@ examples:
>                       <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
>                       <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
>                       <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> +            clock-names = "core_clk",
> +                          "bus_aggr_clk",
> +                          "iface_clk",
> +                          "core_clk_unipro",
> +                          "ref_clk",
> +                          "tx_lane0_sync_clk",
> +                          "rx_lane0_sync_clk",
> +                          "rx_lane1_sync_clk";
>              freq-table-hz = <75000000 300000000>,
>                              <0 0>,
>                              <0 0>,
> --
> 2.17.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index 802640efa956..d17bdc4e934f 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -295,14 +295,6 @@  examples:
                             <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
             interconnect-names = "ufs-ddr", "cpu-ufs";

-            clock-names = "core_clk",
-                          "bus_aggr_clk",
-                          "iface_clk",
-                          "core_clk_unipro",
-                          "ref_clk",
-                          "tx_lane0_sync_clk",
-                          "rx_lane0_sync_clk",
-                          "rx_lane1_sync_clk";
             clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
                      <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
                      <&gcc GCC_UFS_PHY_AHB_CLK>,
@@ -311,6 +303,14 @@  examples:
                      <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
                      <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
                      <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+            clock-names = "core_clk",
+                          "bus_aggr_clk",
+                          "iface_clk",
+                          "core_clk_unipro",
+                          "ref_clk",
+                          "tx_lane0_sync_clk",
+                          "rx_lane0_sync_clk",
+                          "rx_lane1_sync_clk";
             freq-table-hz = <75000000 300000000>,
                             <0 0>,
                             <0 0>,