| Message ID | 20230915121504.806672-2-quic_srichara@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for IPQ5018 tsens | expand |
On 9/19/2023 6:02 PM, Krzysztof Kozlowski wrote: > On 19/09/2023 09:22, Sricharan Ramabadhran wrote: >> >> >> On 9/15/2023 6:15 PM, Krzysztof Kozlowski wrote: >>> On 15/09/2023 14:43, Krzysztof Kozlowski wrote: >>>> On 15/09/2023 14:15, Sricharan Ramabadhran wrote: >>>>> IPQ5018 has tsens v1.0 block with 4 sensors and 1 interrupt. >>>>> >>>>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> >>>>> --- >>>>> [v2] Sorted the compatible and removed example >>>>> >>>> >>>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >>> >>> No, unreviewed. Your driver says it is not compatible with >>> qcom,tsens-v1. This does not look right :/ >>> >> >> Yes it is V1 IP, but since there is no RPM, to enable the IP/SENSORS >> have to do those steps after calling init_common. Similar reason >> added a new feat as well in patch #2 as well. Hence for this, >> new compatible was required. > > I dud not write about new or old compatible ("compatible" as noun). I > wrote that it is not compatible ("compatible" as adjective) with v1. > Ho, in that case, yes it is not compatible with V1 init and features because of 'no rpm'. So in that case, should this be documented as a separate version of 'V1 without rpm' ? Regards, Sricharan
On 9/19/2023 6:26 PM, Krzysztof Kozlowski wrote: > On 19/09/2023 14:48, Sricharan Ramabadhran wrote: >> >> >> On 9/19/2023 6:02 PM, Krzysztof Kozlowski wrote: >>> On 19/09/2023 09:22, Sricharan Ramabadhran wrote: >>>> >>>> >>>> On 9/15/2023 6:15 PM, Krzysztof Kozlowski wrote: >>>>> On 15/09/2023 14:43, Krzysztof Kozlowski wrote: >>>>>> On 15/09/2023 14:15, Sricharan Ramabadhran wrote: >>>>>>> IPQ5018 has tsens v1.0 block with 4 sensors and 1 interrupt. >>>>>>> >>>>>>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> >>>>>>> --- >>>>>>> [v2] Sorted the compatible and removed example >>>>>>> >>>>>> >>>>>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >>>>> >>>>> No, unreviewed. Your driver says it is not compatible with >>>>> qcom,tsens-v1. This does not look right :/ >>>>> >>>> >>>> Yes it is V1 IP, but since there is no RPM, to enable the IP/SENSORS >>>> have to do those steps after calling init_common. Similar reason >>>> added a new feat as well in patch #2 as well. Hence for this, >>>> new compatible was required. >>> >>> I dud not write about new or old compatible ("compatible" as noun). I >>> wrote that it is not compatible ("compatible" as adjective) with v1. >>> >> >> Ho, in that case, yes it is not compatible with V1 init and features >> because of 'no rpm'. So in that case, should this be documented >> as a separate version of 'V1 without rpm' ? > > It should not be mixed with regular v1, just as new entry there. I don't > think fallback is needed - just use SoC specific compatible. > ok, sure, will add in V3. Regards, Sricharan
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 27e9e16e6455..c9586b2fbba4 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -39,6 +39,7 @@ properties: - description: v1 of TSENS items: - enum: + - qcom,ipq5018-tsens - qcom,msm8956-tsens - qcom,msm8976-tsens - qcom,qcs404-tsens
IPQ5018 has tsens v1.0 block with 4 sensors and 1 interrupt. Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> --- [v2] Sorted the compatible and removed example Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 + 1 file changed, 1 insertion(+)