| Message ID | 1694695530-31645-4-git-send-email-wentong.wu@intel.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Intel LJCA device driver | expand |
Hi Wentong, On 9/14/23 14:45, Wentong Wu wrote: > Implements the SPI function of Intel USB-I2C/GPIO/SPI adapter device > named "La Jolla Cove Adapter" (LJCA). It communicate with LJCA SPI > module with specific protocol through interfaces exported by LJCA USB > driver. > > Signed-off-by: Wentong Wu <wentong.wu@intel.com> > Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> > Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> > Tested-by: Hans de Goede <hdegoede@redhat.com> > --- > drivers/spi/Kconfig | 11 ++ > drivers/spi/Makefile | 1 + > drivers/spi/spi-ljca.c | 297 +++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 309 insertions(+) > create mode 100644 drivers/spi/spi-ljca.c > > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig > index 8962b25..ad18864 100644 > --- a/drivers/spi/Kconfig > +++ b/drivers/spi/Kconfig > @@ -583,6 +583,17 @@ config SPI_FSL_ESPI > From MPC8536, 85xx platform uses the controller, and all P10xx, > P20xx, P30xx,P40xx, P50xx uses this controller. > > +config SPI_LJCA > + tristate "Intel La Jolla Cove Adapter SPI support" > + depends on USB_LJCA > + default USB_LJCA > + help > + Select this option to enable SPI driver for the Intel > + La Jolla Cove Adapter (LJCA) board. > + > + This driver can also be built as a module. If so, the module > + will be called spi-ljca. > + > config SPI_MESON_SPICC > tristate "Amlogic Meson SPICC controller" > depends on COMMON_CLK > diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile > index 080c2c1..0847962 100644 > --- a/drivers/spi/Makefile > +++ b/drivers/spi/Makefile > @@ -70,6 +70,7 @@ obj-$(CONFIG_SPI_INTEL_PCI) += spi-intel-pci.o > obj-$(CONFIG_SPI_INTEL_PLATFORM) += spi-intel-platform.o > obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o > obj-$(CONFIG_SPI_JCORE) += spi-jcore.o > +obj-$(CONFIG_SPI_LJCA) += spi-ljca.o > obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o > obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o > obj-$(CONFIG_SPI_MESON_SPICC) += spi-meson-spicc.o I don't know what you are using as a base commit for these patches, but this does not apply cleanly on top of v6.6-rc1. For the next version of these patches please rebases this on top of v6.6-rc1; or on Linus' master branch. Regards, Hans > diff --git a/drivers/spi/spi-ljca.c b/drivers/spi/spi-ljca.c > new file mode 100644 > index 0000000..6b6d000d > --- /dev/null > +++ b/drivers/spi/spi-ljca.c > @@ -0,0 +1,297 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Intel La Jolla Cove Adapter USB-SPI driver > + * > + * Copyright (c) 2023, Intel Corporation. > + */ > + > +#include <linux/auxiliary_bus.h> > +#include <linux/bitfield.h> > +#include <linux/bits.h> > +#include <linux/dev_printk.h> > +#include <linux/module.h> > +#include <linux/spi/spi.h> > +#include <linux/usb/ljca.h> > + > +#define LJCA_SPI_BUS_MAX_HZ 48000000 > + > +#define LJCA_SPI_BUF_SIZE 60u > +#define LJCA_SPI_MAX_XFER_SIZE \ > + (LJCA_SPI_BUF_SIZE - sizeof(struct ljca_spi_xfer_packet)) > + > +#define LJCA_SPI_CLK_MODE_POLARITY BIT(0) > +#define LJCA_SPI_CLK_MODE_PHASE BIT(1) > + > +#define LJCA_SPI_XFER_INDICATOR_ID GENMASK(5, 0) > +#define LJCA_SPI_XFER_INDICATOR_CMPL BIT(6) > +#define LJCA_SPI_XFER_INDICATOR_INDEX BIT(7) > + > +/* SPI commands */ > +enum ljca_spi_cmd { > + LJCA_SPI_INIT = 1, > + LJCA_SPI_READ, > + LJCA_SPI_WRITE, > + LJCA_SPI_WRITEREAD, > + LJCA_SPI_DEINIT, > +}; > + > +enum { > + LJCA_SPI_BUS_SPEED_24M, > + LJCA_SPI_BUS_SPEED_12M, > + LJCA_SPI_BUS_SPEED_8M, > + LJCA_SPI_BUS_SPEED_6M, > + LJCA_SPI_BUS_SPEED_4_8M, /*4.8MHz*/ > + LJCA_SPI_BUS_SPEED_MIN = LJCA_SPI_BUS_SPEED_4_8M, > +}; > + > +enum { > + LJCA_SPI_CLOCK_LOW_POLARITY, > + LJCA_SPI_CLOCK_HIGH_POLARITY, > +}; > + > +enum { > + LJCA_SPI_CLOCK_FIRST_PHASE, > + LJCA_SPI_CLOCK_SECOND_PHASE, > +}; > + > +struct ljca_spi_init_packet { > + u8 index; > + u8 speed; > + u8 mode; > +} __packed; > + > +struct ljca_spi_xfer_packet { > + u8 indicator; > + u8 len; > + u8 data[]; > +} __packed; > + > +struct ljca_spi_dev { > + struct ljca_client *ljca; > + struct spi_controller *controller; > + struct ljca_spi_info *spi_info; > + u8 speed; > + u8 mode; > + > + u8 obuf[LJCA_SPI_BUF_SIZE]; > + u8 ibuf[LJCA_SPI_BUF_SIZE]; > +}; > + > +static int ljca_spi_read_write(struct ljca_spi_dev *ljca_spi, const u8 *w_data, > + u8 *r_data, int len, int id, int complete, > + int cmd) > +{ > + struct ljca_spi_xfer_packet *w_packet = > + (struct ljca_spi_xfer_packet *)ljca_spi->obuf; > + struct ljca_spi_xfer_packet *r_packet = > + (struct ljca_spi_xfer_packet *)ljca_spi->ibuf; > + int ret; > + > + w_packet->indicator = FIELD_PREP(LJCA_SPI_XFER_INDICATOR_ID, id) | > + FIELD_PREP(LJCA_SPI_XFER_INDICATOR_CMPL, complete) | > + FIELD_PREP(LJCA_SPI_XFER_INDICATOR_INDEX, > + ljca_spi->spi_info->id); > + > + if (cmd == LJCA_SPI_READ) { > + w_packet->len = sizeof(u16); > + *(__le16 *)&w_packet->data[0] = cpu_to_le16(len); > + } else { > + w_packet->len = len; > + memcpy(w_packet->data, w_data, len); > + } > + > + ret = ljca_transfer(ljca_spi->ljca, cmd, (u8 *)w_packet, > + struct_size(w_packet, data, w_packet->len), > + (u8 *)r_packet, LJCA_SPI_BUF_SIZE); > + if (ret < 0) > + return ret; > + else if (ret < sizeof(*r_packet) || r_packet->len <= 0) > + return -EIO; > + > + if (r_data) > + memcpy(r_data, r_packet->data, r_packet->len); > + > + return 0; > +} > + > +static int ljca_spi_init(struct ljca_spi_dev *ljca_spi, u8 div, u8 mode) > +{ > + struct ljca_spi_init_packet w_packet = {}; > + int ret; > + > + if (ljca_spi->mode == mode && ljca_spi->speed == div) > + return 0; > + > + w_packet.index = ljca_spi->spi_info->id; > + w_packet.speed = div; > + w_packet.mode = FIELD_PREP(LJCA_SPI_CLK_MODE_POLARITY, > + (mode & SPI_CPOL) ? LJCA_SPI_CLOCK_HIGH_POLARITY : > + LJCA_SPI_CLOCK_LOW_POLARITY) | > + FIELD_PREP(LJCA_SPI_CLK_MODE_PHASE, > + (mode & SPI_CPHA) ? LJCA_SPI_CLOCK_SECOND_PHASE : > + LJCA_SPI_CLOCK_FIRST_PHASE); > + > + ret = ljca_transfer(ljca_spi->ljca, LJCA_SPI_INIT, (u8 *)&w_packet, > + sizeof(w_packet), NULL, 0); > + if (ret < 0) > + return ret; > + > + ljca_spi->mode = mode; > + ljca_spi->speed = div; > + > + return 0; > +} > + > +static int ljca_spi_deinit(struct ljca_spi_dev *ljca_spi) > +{ > + struct ljca_spi_init_packet w_packet = {}; > + int ret; > + > + w_packet.index = ljca_spi->spi_info->id; > + > + ret = ljca_transfer(ljca_spi->ljca, LJCA_SPI_DEINIT, (u8 *)&w_packet, > + sizeof(w_packet), NULL, 0); > + > + return ret < 0 ? ret : 0; > +} > + > +static inline int ljca_spi_transfer(struct ljca_spi_dev *ljca_spi, > + const u8 *tx_data, u8 *rx_data, u16 len) > +{ > + int complete, cur_len; > + int remaining = len; > + int cmd, ret, i; > + int offset = 0; > + > + if (tx_data && rx_data) > + cmd = LJCA_SPI_WRITEREAD; > + else if (tx_data) > + cmd = LJCA_SPI_WRITE; > + else if (rx_data) > + cmd = LJCA_SPI_READ; > + else > + return -EINVAL; > + > + for (i = 0; remaining > 0; i++) { > + cur_len = min_t(unsigned int, remaining, LJCA_SPI_MAX_XFER_SIZE); > + complete = (cur_len == remaining); > + > + ret = ljca_spi_read_write(ljca_spi, > + tx_data ? tx_data + offset : NULL, > + rx_data ? rx_data + offset : NULL, > + cur_len, i, complete, cmd); > + if (ret) > + return ret; > + > + offset += cur_len; > + remaining -= cur_len; > + } > + > + return 0; > +} > + > +static int ljca_spi_transfer_one(struct spi_controller *controller, > + struct spi_device *spi, > + struct spi_transfer *xfer) > +{ > + u8 div = DIV_ROUND_UP(controller->max_speed_hz, xfer->speed_hz) / 2 - 1; > + struct ljca_spi_dev *ljca_spi = spi_controller_get_devdata(controller); > + int ret; > + > + div = min_t(u8, LJCA_SPI_BUS_SPEED_MIN, div); > + > + ret = ljca_spi_init(ljca_spi, div, spi->mode); > + if (ret) { > + dev_err(&ljca_spi->ljca->auxdev.dev, > + "cannot initialize transfer ret %d\n", ret); > + return ret; > + } > + > + ret = ljca_spi_transfer(ljca_spi, xfer->tx_buf, xfer->rx_buf, xfer->len); > + if (ret) > + dev_err(&ljca_spi->ljca->auxdev.dev, > + "transfer failed len: %d\n", xfer->len); > + > + return ret; > +} > + > +static int ljca_spi_probe(struct auxiliary_device *auxdev, > + const struct auxiliary_device_id *aux_dev_id) > +{ > + struct ljca_client *ljca = auxiliary_dev_to_ljca_client(auxdev); > + struct spi_controller *controller; > + struct ljca_spi_dev *ljca_spi; > + int ret; > + > + controller = devm_spi_alloc_master(&auxdev->dev, sizeof(*ljca_spi)); > + if (!controller) > + return -ENOMEM; > + > + ljca_spi = spi_controller_get_devdata(controller); > + ljca_spi->ljca = ljca; > + ljca_spi->spi_info = dev_get_platdata(&auxdev->dev); > + ljca_spi->controller = controller; > + > + controller->bus_num = -1; > + controller->mode_bits = SPI_CPHA | SPI_CPOL; > + controller->transfer_one = ljca_spi_transfer_one; > + controller->auto_runtime_pm = false; > + controller->max_speed_hz = LJCA_SPI_BUS_MAX_HZ; > + > + device_set_node(&ljca_spi->controller->dev, dev_fwnode(&auxdev->dev)); > + auxiliary_set_drvdata(auxdev, controller); > + > + ret = spi_register_controller(controller); > + if (ret) > + dev_err(&auxdev->dev, "Failed to register controller\n"); > + > + return ret; > +} > + > +static void ljca_spi_dev_remove(struct auxiliary_device *auxdev) > +{ > + struct spi_controller *controller = auxiliary_get_drvdata(auxdev); > + struct ljca_spi_dev *ljca_spi = spi_controller_get_devdata(controller); > + > + spi_unregister_controller(controller); > + ljca_spi_deinit(ljca_spi); > +} > + > +static int ljca_spi_dev_suspend(struct device *dev) > +{ > + struct spi_controller *controller = dev_get_drvdata(dev); > + > + return spi_controller_suspend(controller); > +} > + > +static int ljca_spi_dev_resume(struct device *dev) > +{ > + struct spi_controller *controller = dev_get_drvdata(dev); > + > + return spi_controller_resume(controller); > +} > + > +static const struct dev_pm_ops ljca_spi_pm = { > + SYSTEM_SLEEP_PM_OPS(ljca_spi_dev_suspend, ljca_spi_dev_resume) > +}; > + > +static const struct auxiliary_device_id ljca_spi_id_table[] = { > + { "usb_ljca.ljca-spi", 0 }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(auxiliary, ljca_spi_id_table); > + > +static struct auxiliary_driver ljca_spi_driver = { > + .driver.pm = &ljca_spi_pm, > + .probe = ljca_spi_probe, > + .remove = ljca_spi_dev_remove, > + .id_table = ljca_spi_id_table, > +}; > +module_auxiliary_driver(ljca_spi_driver); > + > +MODULE_AUTHOR("Wentong Wu <wentong.wu@intel.com>"); > +MODULE_AUTHOR("Zhifeng Wang <zhifeng.wang@intel.com>"); > +MODULE_AUTHOR("Lixu Zhang <lixu.zhang@intel.com>"); > +MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB-SPI driver"); > +MODULE_LICENSE("GPL"); > +MODULE_IMPORT_NS(LJCA);
> From: Hans de Goede > > Hi Wentong, > > On 9/14/23 14:45, Wentong Wu wrote: > > Implements the SPI function of Intel USB-I2C/GPIO/SPI adapter device > > named "La Jolla Cove Adapter" (LJCA). It communicate with LJCA SPI > > module with specific protocol through interfaces exported by LJCA USB > > driver. > > > > Signed-off-by: Wentong Wu <wentong.wu@intel.com> > > Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> > > Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> > > Tested-by: Hans de Goede <hdegoede@redhat.com> > > --- > > drivers/spi/Kconfig | 11 ++ > > drivers/spi/Makefile | 1 + > > drivers/spi/spi-ljca.c | 297 > > +++++++++++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 309 insertions(+) > > create mode 100644 drivers/spi/spi-ljca.c > > > > diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index > > 8962b25..ad18864 100644 > > --- a/drivers/spi/Kconfig > > +++ b/drivers/spi/Kconfig > > @@ -583,6 +583,17 @@ config SPI_FSL_ESPI > > From MPC8536, 85xx platform uses the controller, and all P10xx, > > P20xx, P30xx,P40xx, P50xx uses this controller. > > > > +config SPI_LJCA > > + tristate "Intel La Jolla Cove Adapter SPI support" > > + depends on USB_LJCA > > + default USB_LJCA > > + help > > + Select this option to enable SPI driver for the Intel > > + La Jolla Cove Adapter (LJCA) board. > > + > > + This driver can also be built as a module. If so, the module > > + will be called spi-ljca. > > + > > config SPI_MESON_SPICC > > tristate "Amlogic Meson SPICC controller" > > depends on COMMON_CLK > > diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index > > 080c2c1..0847962 100644 > > --- a/drivers/spi/Makefile > > +++ b/drivers/spi/Makefile > > @@ -70,6 +70,7 @@ obj-$(CONFIG_SPI_INTEL_PCI) += spi-intel- > pci.o > > obj-$(CONFIG_SPI_INTEL_PLATFORM) += spi-intel-platform.o > > obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o > > obj-$(CONFIG_SPI_JCORE) += spi-jcore.o > > +obj-$(CONFIG_SPI_LJCA) += spi-ljca.o > > obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o > > obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o > > obj-$(CONFIG_SPI_MESON_SPICC) += spi-meson-spicc.o > > I don't know what you are using as a base commit for these patches, but this > does not apply cleanly on top of v6.6-rc1. > > For the next version of these patches please rebases this on top of v6.6-rc1; or > on Linus' master branch. > Thanks, v17 is based on 6.5-rc4, now v19 is based on Linus' master branch. BR, Wentong > Regards, > > Hans
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 8962b25..ad18864 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -583,6 +583,17 @@ config SPI_FSL_ESPI From MPC8536, 85xx platform uses the controller, and all P10xx, P20xx, P30xx,P40xx, P50xx uses this controller. +config SPI_LJCA + tristate "Intel La Jolla Cove Adapter SPI support" + depends on USB_LJCA + default USB_LJCA + help + Select this option to enable SPI driver for the Intel + La Jolla Cove Adapter (LJCA) board. + + This driver can also be built as a module. If so, the module + will be called spi-ljca. + config SPI_MESON_SPICC tristate "Amlogic Meson SPICC controller" depends on COMMON_CLK diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 080c2c1..0847962 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_SPI_INTEL_PCI) += spi-intel-pci.o obj-$(CONFIG_SPI_INTEL_PLATFORM) += spi-intel-platform.o obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o obj-$(CONFIG_SPI_JCORE) += spi-jcore.o +obj-$(CONFIG_SPI_LJCA) += spi-ljca.o obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o obj-$(CONFIG_SPI_MESON_SPICC) += spi-meson-spicc.o diff --git a/drivers/spi/spi-ljca.c b/drivers/spi/spi-ljca.c new file mode 100644 index 0000000..6b6d000d --- /dev/null +++ b/drivers/spi/spi-ljca.c @@ -0,0 +1,297 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Intel La Jolla Cove Adapter USB-SPI driver + * + * Copyright (c) 2023, Intel Corporation. + */ + +#include <linux/auxiliary_bus.h> +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/dev_printk.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/usb/ljca.h> + +#define LJCA_SPI_BUS_MAX_HZ 48000000 + +#define LJCA_SPI_BUF_SIZE 60u +#define LJCA_SPI_MAX_XFER_SIZE \ + (LJCA_SPI_BUF_SIZE - sizeof(struct ljca_spi_xfer_packet)) + +#define LJCA_SPI_CLK_MODE_POLARITY BIT(0) +#define LJCA_SPI_CLK_MODE_PHASE BIT(1) + +#define LJCA_SPI_XFER_INDICATOR_ID GENMASK(5, 0) +#define LJCA_SPI_XFER_INDICATOR_CMPL BIT(6) +#define LJCA_SPI_XFER_INDICATOR_INDEX BIT(7) + +/* SPI commands */ +enum ljca_spi_cmd { + LJCA_SPI_INIT = 1, + LJCA_SPI_READ, + LJCA_SPI_WRITE, + LJCA_SPI_WRITEREAD, + LJCA_SPI_DEINIT, +}; + +enum { + LJCA_SPI_BUS_SPEED_24M, + LJCA_SPI_BUS_SPEED_12M, + LJCA_SPI_BUS_SPEED_8M, + LJCA_SPI_BUS_SPEED_6M, + LJCA_SPI_BUS_SPEED_4_8M, /*4.8MHz*/ + LJCA_SPI_BUS_SPEED_MIN = LJCA_SPI_BUS_SPEED_4_8M, +}; + +enum { + LJCA_SPI_CLOCK_LOW_POLARITY, + LJCA_SPI_CLOCK_HIGH_POLARITY, +}; + +enum { + LJCA_SPI_CLOCK_FIRST_PHASE, + LJCA_SPI_CLOCK_SECOND_PHASE, +}; + +struct ljca_spi_init_packet { + u8 index; + u8 speed; + u8 mode; +} __packed; + +struct ljca_spi_xfer_packet { + u8 indicator; + u8 len; + u8 data[]; +} __packed; + +struct ljca_spi_dev { + struct ljca_client *ljca; + struct spi_controller *controller; + struct ljca_spi_info *spi_info; + u8 speed; + u8 mode; + + u8 obuf[LJCA_SPI_BUF_SIZE]; + u8 ibuf[LJCA_SPI_BUF_SIZE]; +}; + +static int ljca_spi_read_write(struct ljca_spi_dev *ljca_spi, const u8 *w_data, + u8 *r_data, int len, int id, int complete, + int cmd) +{ + struct ljca_spi_xfer_packet *w_packet = + (struct ljca_spi_xfer_packet *)ljca_spi->obuf; + struct ljca_spi_xfer_packet *r_packet = + (struct ljca_spi_xfer_packet *)ljca_spi->ibuf; + int ret; + + w_packet->indicator = FIELD_PREP(LJCA_SPI_XFER_INDICATOR_ID, id) | + FIELD_PREP(LJCA_SPI_XFER_INDICATOR_CMPL, complete) | + FIELD_PREP(LJCA_SPI_XFER_INDICATOR_INDEX, + ljca_spi->spi_info->id); + + if (cmd == LJCA_SPI_READ) { + w_packet->len = sizeof(u16); + *(__le16 *)&w_packet->data[0] = cpu_to_le16(len); + } else { + w_packet->len = len; + memcpy(w_packet->data, w_data, len); + } + + ret = ljca_transfer(ljca_spi->ljca, cmd, (u8 *)w_packet, + struct_size(w_packet, data, w_packet->len), + (u8 *)r_packet, LJCA_SPI_BUF_SIZE); + if (ret < 0) + return ret; + else if (ret < sizeof(*r_packet) || r_packet->len <= 0) + return -EIO; + + if (r_data) + memcpy(r_data, r_packet->data, r_packet->len); + + return 0; +} + +static int ljca_spi_init(struct ljca_spi_dev *ljca_spi, u8 div, u8 mode) +{ + struct ljca_spi_init_packet w_packet = {}; + int ret; + + if (ljca_spi->mode == mode && ljca_spi->speed == div) + return 0; + + w_packet.index = ljca_spi->spi_info->id; + w_packet.speed = div; + w_packet.mode = FIELD_PREP(LJCA_SPI_CLK_MODE_POLARITY, + (mode & SPI_CPOL) ? LJCA_SPI_CLOCK_HIGH_POLARITY : + LJCA_SPI_CLOCK_LOW_POLARITY) | + FIELD_PREP(LJCA_SPI_CLK_MODE_PHASE, + (mode & SPI_CPHA) ? LJCA_SPI_CLOCK_SECOND_PHASE : + LJCA_SPI_CLOCK_FIRST_PHASE); + + ret = ljca_transfer(ljca_spi->ljca, LJCA_SPI_INIT, (u8 *)&w_packet, + sizeof(w_packet), NULL, 0); + if (ret < 0) + return ret; + + ljca_spi->mode = mode; + ljca_spi->speed = div; + + return 0; +} + +static int ljca_spi_deinit(struct ljca_spi_dev *ljca_spi) +{ + struct ljca_spi_init_packet w_packet = {}; + int ret; + + w_packet.index = ljca_spi->spi_info->id; + + ret = ljca_transfer(ljca_spi->ljca, LJCA_SPI_DEINIT, (u8 *)&w_packet, + sizeof(w_packet), NULL, 0); + + return ret < 0 ? ret : 0; +} + +static inline int ljca_spi_transfer(struct ljca_spi_dev *ljca_spi, + const u8 *tx_data, u8 *rx_data, u16 len) +{ + int complete, cur_len; + int remaining = len; + int cmd, ret, i; + int offset = 0; + + if (tx_data && rx_data) + cmd = LJCA_SPI_WRITEREAD; + else if (tx_data) + cmd = LJCA_SPI_WRITE; + else if (rx_data) + cmd = LJCA_SPI_READ; + else + return -EINVAL; + + for (i = 0; remaining > 0; i++) { + cur_len = min_t(unsigned int, remaining, LJCA_SPI_MAX_XFER_SIZE); + complete = (cur_len == remaining); + + ret = ljca_spi_read_write(ljca_spi, + tx_data ? tx_data + offset : NULL, + rx_data ? rx_data + offset : NULL, + cur_len, i, complete, cmd); + if (ret) + return ret; + + offset += cur_len; + remaining -= cur_len; + } + + return 0; +} + +static int ljca_spi_transfer_one(struct spi_controller *controller, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + u8 div = DIV_ROUND_UP(controller->max_speed_hz, xfer->speed_hz) / 2 - 1; + struct ljca_spi_dev *ljca_spi = spi_controller_get_devdata(controller); + int ret; + + div = min_t(u8, LJCA_SPI_BUS_SPEED_MIN, div); + + ret = ljca_spi_init(ljca_spi, div, spi->mode); + if (ret) { + dev_err(&ljca_spi->ljca->auxdev.dev, + "cannot initialize transfer ret %d\n", ret); + return ret; + } + + ret = ljca_spi_transfer(ljca_spi, xfer->tx_buf, xfer->rx_buf, xfer->len); + if (ret) + dev_err(&ljca_spi->ljca->auxdev.dev, + "transfer failed len: %d\n", xfer->len); + + return ret; +} + +static int ljca_spi_probe(struct auxiliary_device *auxdev, + const struct auxiliary_device_id *aux_dev_id) +{ + struct ljca_client *ljca = auxiliary_dev_to_ljca_client(auxdev); + struct spi_controller *controller; + struct ljca_spi_dev *ljca_spi; + int ret; + + controller = devm_spi_alloc_master(&auxdev->dev, sizeof(*ljca_spi)); + if (!controller) + return -ENOMEM; + + ljca_spi = spi_controller_get_devdata(controller); + ljca_spi->ljca = ljca; + ljca_spi->spi_info = dev_get_platdata(&auxdev->dev); + ljca_spi->controller = controller; + + controller->bus_num = -1; + controller->mode_bits = SPI_CPHA | SPI_CPOL; + controller->transfer_one = ljca_spi_transfer_one; + controller->auto_runtime_pm = false; + controller->max_speed_hz = LJCA_SPI_BUS_MAX_HZ; + + device_set_node(&ljca_spi->controller->dev, dev_fwnode(&auxdev->dev)); + auxiliary_set_drvdata(auxdev, controller); + + ret = spi_register_controller(controller); + if (ret) + dev_err(&auxdev->dev, "Failed to register controller\n"); + + return ret; +} + +static void ljca_spi_dev_remove(struct auxiliary_device *auxdev) +{ + struct spi_controller *controller = auxiliary_get_drvdata(auxdev); + struct ljca_spi_dev *ljca_spi = spi_controller_get_devdata(controller); + + spi_unregister_controller(controller); + ljca_spi_deinit(ljca_spi); +} + +static int ljca_spi_dev_suspend(struct device *dev) +{ + struct spi_controller *controller = dev_get_drvdata(dev); + + return spi_controller_suspend(controller); +} + +static int ljca_spi_dev_resume(struct device *dev) +{ + struct spi_controller *controller = dev_get_drvdata(dev); + + return spi_controller_resume(controller); +} + +static const struct dev_pm_ops ljca_spi_pm = { + SYSTEM_SLEEP_PM_OPS(ljca_spi_dev_suspend, ljca_spi_dev_resume) +}; + +static const struct auxiliary_device_id ljca_spi_id_table[] = { + { "usb_ljca.ljca-spi", 0 }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(auxiliary, ljca_spi_id_table); + +static struct auxiliary_driver ljca_spi_driver = { + .driver.pm = &ljca_spi_pm, + .probe = ljca_spi_probe, + .remove = ljca_spi_dev_remove, + .id_table = ljca_spi_id_table, +}; +module_auxiliary_driver(ljca_spi_driver); + +MODULE_AUTHOR("Wentong Wu <wentong.wu@intel.com>"); +MODULE_AUTHOR("Zhifeng Wang <zhifeng.wang@intel.com>"); +MODULE_AUTHOR("Lixu Zhang <lixu.zhang@intel.com>"); +MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB-SPI driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(LJCA);