| Message ID | 1694411968-14413-7-git-send-email-quic_cang@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Enable HS-G5 support on SM8550 | expand |
On 9/11/2023 11:29 AM, Can Guo wrote: > Having UFS power info available in sysfs makes it easier to tell the state > of the link during runtime considering we have a bounch of power saving > features and various combinations for backward compatiblity. Please fix spelling mistake *bounch -> bunch > > Signed-off-by: Can Guo <quic_cang@quicinc.com> > --- > Documentation/ABI/testing/sysfs-driver-ufs | 48 ++++++++++++++++++++++++++---- > 1 file changed, 43 insertions(+), 5 deletions(-) > > diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs > index 0c7efaf..25169f2 100644 > --- a/Documentation/ABI/testing/sysfs-driver-ufs > +++ b/Documentation/ABI/testing/sysfs-driver-ufs > @@ -1214,12 +1214,50 @@ Description: This file shows the average latency (in micro seconds) of write > > The file is read only. > > -What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum > -What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_sum > -Date: January 2021 > +What: /sys/bus/platform/drivers/ufshcd/*/power_info/gear > +What: /sys/bus/platform/devices/*.ufs/power_info/gear > +Date: September 2023 > Contact: Can Guo <quic_cang@quicinc.com> > -Description: This file shows the total latency (in micro seconds) of write > - requests after monitor gets started. > +Description: This file shows the gear of UFS link. > + > + The file is read only. > + > +What: /sys/bus/platform/drivers/ufshcd/*/power_info/lane > +What: /sys/bus/platform/devices/*.ufs/power_info/lane > +Date: September 2023 > +Contact: Can Guo <quic_cang@quicinc.com> > +Description: This file shows how many lanes are enabled on the UFS link. > + > + The file is read only. > + > +What: /sys/bus/platform/drivers/ufshcd/*/power_info/mode > +What: /sys/bus/platform/devices/*.ufs/power_info/mode > +Date: September 2023 > +Contact: Can Guo <quic_cang@quicinc.com> > +Description: This file shows the power mode of UFS link. > + > + The file is read only. > + > +What: /sys/bus/platform/drivers/ufshcd/*/power_info/rate > +What: /sys/bus/platform/devices/*.ufs/power_info/rate > +Date: September 2023 > +Contact: Can Guo <quic_cang@quicinc.com> > +Description: This file shows the high speed rate of UFS link. > + > + The file is read only. > + > +What: /sys/bus/platform/drivers/ufshcd/*/power_info/dev_pm > +What: /sys/bus/platform/devices/*.ufs/power_info/dev_pm > +Date: September 2023 > +Contact: Can Guo <quic_cang@quicinc.com> > +Description: This file shows the UFS device power mode, i.e., the power mode > + set to UFS device via the Start Stop Unit command. > + > +What: /sys/bus/platform/drivers/ufshcd/*/power_info/link_state > +What: /sys/bus/platform/devices/*.ufs/power_info/link_state > +Date: September 2023 > +Contact: Can Guo <quic_cang@quicinc.com> > +Description: This file shows the the state of the UFS link. > > The file is read only. > Thanks, nitin
Hi Nitin, On 9/14/2023 7:35 PM, Nitin Rawat wrote: > > > On 9/11/2023 11:29 AM, Can Guo wrote: >> Having UFS power info available in sysfs makes it easier to tell the >> state >> of the link during runtime considering we have a bounch of power saving >> features and various combinations for backward compatiblity. > > Please fix spelling mistake *bounch -> bunch done Thanks, Can Guo
On 9/10/23 22:59, Can Guo wrote: > Having UFS power info available in sysfs makes it easier to tell the state > of the link during runtime considering we have a bounch of power saving > features and various combinations for backward compatiblity. bounch -> bunch compatiblity -> compatibility Additionally, please combine this patch with patch 5/6 into a single patch. > -What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum > -What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_sum > -Date: January 2021 Has the above information perhaps been removed by accident? > +What: /sys/bus/platform/drivers/ufshcd/*/power_info/gear > +What: /sys/bus/platform/devices/*.ufs/power_info/gear > +Date: September 2023 > Contact: Can Guo <quic_cang@quicinc.com> > -Description: This file shows the total latency (in micro seconds) of write > - requests after monitor gets started. > +Description: This file shows the gear of UFS link. > + > + The file is read only. Please explain what "gear" means and also what the unit is of the numbers reported via this sysfs attribute. > +What: /sys/bus/platform/drivers/ufshcd/*/power_info/mode > +What: /sys/bus/platform/devices/*.ufs/power_info/mode > +Date: September 2023 > +Contact: Can Guo <quic_cang@quicinc.com> > +Description: This file shows the power mode of UFS link. > + > + The file is read only. Please document the meaning of the numbers reported via this sysfs attribute. > +What: /sys/bus/platform/drivers/ufshcd/*/power_info/rate > +What: /sys/bus/platform/devices/*.ufs/power_info/rate > +Date: September 2023 > +Contact: Can Guo <quic_cang@quicinc.com> > +Description: This file shows the high speed rate of UFS link. > + > + The file is read only. Please document the unit of the numbers reported via this sysfs attribute. > +What: /sys/bus/platform/drivers/ufshcd/*/power_info/dev_pm > +What: /sys/bus/platform/devices/*.ufs/power_info/dev_pm > +Date: September 2023 > +Contact: Can Guo <quic_cang@quicinc.com> > +Description: This file shows the UFS device power mode, i.e., the power mode > + set to UFS device via the Start Stop Unit command. Please document the meaning of the numbers reported through this sysfs attribute. > +What: /sys/bus/platform/drivers/ufshcd/*/power_info/link_state > +What: /sys/bus/platform/devices/*.ufs/power_info/link_state > +Date: September 2023 > +Contact: Can Guo <quic_cang@quicinc.com> > +Description: This file shows the the state of the UFS link. Please document the meaning of the numbers reported through this sysfs attribute. Thanks, Bart.
Hi Bart, On 9/18/2023 11:36 PM, Bart Van Assche wrote: > On 9/10/23 22:59, Can Guo wrote: >> Having UFS power info available in sysfs makes it easier to tell the >> state >> of the link during runtime considering we have a bounch of power saving >> features and various combinations for backward compatiblity. > > bounch -> bunch > compatiblity -> compatibility > > Additionally, please combine this patch with patch 5/6 into a single > patch. Sure > >> -What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum >> -What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_sum >> -Date: January 2021 > > Has the above information perhaps been removed by accident? Yes, my bad, good catch. > >> +What: /sys/bus/platform/drivers/ufshcd/*/power_info/gear >> +What: /sys/bus/platform/devices/*.ufs/power_info/gear >> +Date: September 2023 >> Contact: Can Guo <quic_cang@quicinc.com> >> -Description: This file shows the total latency (in micro seconds) >> of write >> - requests after monitor gets started. >> +Description: This file shows the gear of UFS link. >> + >> + The file is read only. > > Please explain what "gear" means and also what the unit is of the > numbers reported via this sysfs attribute. Sure > >> +What: /sys/bus/platform/drivers/ufshcd/*/power_info/mode >> +What: /sys/bus/platform/devices/*.ufs/power_info/mode >> +Date: September 2023 >> +Contact: Can Guo <quic_cang@quicinc.com> >> +Description: This file shows the power mode of UFS link. >> + >> + The file is read only. > > Please document the meaning of the numbers reported via this sysfs > attribute. Sure > >> +What: /sys/bus/platform/drivers/ufshcd/*/power_info/rate >> +What: /sys/bus/platform/devices/*.ufs/power_info/rate >> +Date: September 2023 >> +Contact: Can Guo <quic_cang@quicinc.com> >> +Description: This file shows the high speed rate of UFS link. >> + >> + The file is read only. > > Please document the unit of the numbers reported via this sysfs > attribute. Sure > >> +What: /sys/bus/platform/drivers/ufshcd/*/power_info/dev_pm >> +What: /sys/bus/platform/devices/*.ufs/power_info/dev_pm >> +Date: September 2023 >> +Contact: Can Guo <quic_cang@quicinc.com> >> +Description: This file shows the UFS device power mode, i.e., the >> power mode >> + set to UFS device via the Start Stop Unit command. > > Please document the meaning of the numbers reported through this sysfs > attribute. Sure > >> +What: /sys/bus/platform/drivers/ufshcd/*/power_info/link_state >> +What: /sys/bus/platform/devices/*.ufs/power_info/link_state >> +Date: September 2023 >> +Contact: Can Guo <quic_cang@quicinc.com> >> +Description: This file shows the the state of the UFS link. > > Please document the meaning of the numbers reported through this sysfs > attribute. Sure Thanks, Can Guo. > > Thanks, > > Bart.
diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index 0c7efaf..25169f2 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -1214,12 +1214,50 @@ Description: This file shows the average latency (in micro seconds) of write The file is read only. -What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum -What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_sum -Date: January 2021 +What: /sys/bus/platform/drivers/ufshcd/*/power_info/gear +What: /sys/bus/platform/devices/*.ufs/power_info/gear +Date: September 2023 Contact: Can Guo <quic_cang@quicinc.com> -Description: This file shows the total latency (in micro seconds) of write - requests after monitor gets started. +Description: This file shows the gear of UFS link. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/lane +What: /sys/bus/platform/devices/*.ufs/power_info/lane +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows how many lanes are enabled on the UFS link. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/mode +What: /sys/bus/platform/devices/*.ufs/power_info/mode +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the power mode of UFS link. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/rate +What: /sys/bus/platform/devices/*.ufs/power_info/rate +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the high speed rate of UFS link. + + The file is read only. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/dev_pm +What: /sys/bus/platform/devices/*.ufs/power_info/dev_pm +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the UFS device power mode, i.e., the power mode + set to UFS device via the Start Stop Unit command. + +What: /sys/bus/platform/drivers/ufshcd/*/power_info/link_state +What: /sys/bus/platform/devices/*.ufs/power_info/link_state +Date: September 2023 +Contact: Can Guo <quic_cang@quicinc.com> +Description: This file shows the the state of the UFS link. The file is read only.
Having UFS power info available in sysfs makes it easier to tell the state of the link during runtime considering we have a bounch of power saving features and various combinations for backward compatiblity. Signed-off-by: Can Guo <quic_cang@quicinc.com> --- Documentation/ABI/testing/sysfs-driver-ufs | 48 ++++++++++++++++++++++++++---- 1 file changed, 43 insertions(+), 5 deletions(-)