mbox series

[0/7] Add support for IPQ5018 tsens

Message ID 1693250307-8910-1-git-send-email-quic_srichara@quicinc.com
Headers show
Series Add support for IPQ5018 tsens | expand

Message

Sricharan R Aug. 28, 2023, 7:18 p.m. UTC 
IPQ5018 has tsens V1.0 IP with 4 sensors and 1 interrupt.
There is no RPM present in the soc to do tsens early enable.
Adding support for the same here.

Sricharan Ramabadhran (7):
  dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible
  thermal/drivers/qcom: Add new feat for soc without rpm
  thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens.
  thermal/drivers/qcom: Add IPQ5018 compatible.
  dt-bindings: nvmem: Add compatible for IPQ5018
  arm64: dts: qcom: ipq5018: Add tsens node
  arm64: dts: qcom: ipq5018: Add thermal zones

 .../bindings/nvmem/qcom,qfprom.yaml           |   1 +
 .../bindings/thermal/qcom-tsens.yaml          |  19 +++
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         |  81 ++++++++++++
 drivers/thermal/qcom/tsens-v1.c               | 115 ++++++++++++++++++
 drivers/thermal/qcom/tsens.c                  |   5 +-
 drivers/thermal/qcom/tsens.h                  |   5 +-
 6 files changed, 224 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski Aug. 28, 2023, 7:21 p.m. UTC | #1 
On 28/08/2023 21:18, Sricharan Ramabadhran wrote:
> IPQ5018 has tsens v1.0 block with 4 sensors and 1 interrupt.
> 
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
>  .../bindings/thermal/qcom-tsens.yaml          | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index 27e9e16e6455..2309bb6dce1b 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -42,6 +42,7 @@ properties:
>                - qcom,msm8956-tsens
>                - qcom,msm8976-tsens
>                - qcom,qcs404-tsens
> +              - qcom,ipq5018-tsens

This does not look like placed in alphanumeric order.

>            - const: qcom,tsens-v1
>  
>        - description: v2 of TSENS
> @@ -409,4 +410,22 @@ examples:
>             #qcom,sensors = <16>;
>             #thermal-sensor-cells = <1>;
>      };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    // Example 5 (for any IPQ5018 based SoC-s):

No need for new example for a difference in compatible. Drop it.
Best regards,
Krzysztof
Krzysztof Kozlowski Aug. 28, 2023, 7:25 p.m. UTC | #2 
On 28/08/2023 21:18, Sricharan Ramabadhran wrote:
> IPQ5018 has tsens V1.0 IP with 4 sensors.
> There is no RPM, so tsens has to manually enabled.
> Adding the tsens and nvmem node.
> 
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/ipq5018.dtsi | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 9f13d2dcdfd5..277b3cfc7f72 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -93,6 +93,29 @@ soc: soc@0 {
>  		#size-cells = <1>;
>  		ranges = <0 0 0 0xffffffff>;
>  
> +		qfprom_nvmem: qfprom_nvmem@a0000 {

Nope. Come on, where do you see such node naming. Please do not send
code from downstream, but work on upstream sources. Open other most
recent DTS, take a look how it is done and try to do something similar.

> +			#address-cells = <1>;
> +			#size-cells = <1>;

compatible is always the first property. Then reg.

> +			compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
> +			reg = <0xa0000 0x1000>;
> +
> +			tsens_calib: calib@248 {
> +				reg = <0x248 0x10>;
> +			};
> +		};
> +

Best regards,
Krzysztof
Dmitry Baryshkov Aug. 28, 2023, 9:19 p.m. UTC | #3 
On Mon, 28 Aug 2023 at 22:20, Sricharan Ramabadhran
<quic_srichara@quicinc.com> wrote:
>
> IPQ5018 has tsens V1.0 IP with 4 sensors.
> There is no RPM, so tsens has to manually enabled.
> Adding the tsens and nvmem node.
>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/ipq5018.dtsi | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 9f13d2dcdfd5..277b3cfc7f72 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -93,6 +93,29 @@ soc: soc@0 {
>                 #size-cells = <1>;
>                 ranges = <0 0 0 0xffffffff>;
>
> +               qfprom_nvmem: qfprom_nvmem@a0000 {
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +                       compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
> +                       reg = <0xa0000 0x1000>;
> +
> +                       tsens_calib: calib@248 {
> +                               reg = <0x248 0x10>;
> +                       };

NAK. Please define per-sensor fields here.

> +               };
> +
> +               tsens: thermal-sensor@4a9000 {
> +                       compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1";
> +                       reg = <0x4a9000 0x1000>, /* TM */
> +                             <0x4a8000 0x1000>; /* SORT */
> +                       nvmem-cells = <&tsens_calib>;
> +                       nvmem-cell-names = "calib";
> +                       interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>;
> +                       interrupt-names = "uplow";
> +                       #qcom,sensors = <5>;
> +                       #thermal-sensor-cells = <1>;
> +               };
> +
>                 tlmm: pinctrl@1000000 {
>                         compatible = "qcom,ipq5018-tlmm";
>                         reg = <0x01000000 0x300000>;
> --
> 2.34.1
>
Sricharan R Aug. 29, 2023, 5:59 a.m. UTC | #4 
Hi Krzysztof,

On 8/29/2023 12:51 AM, Krzysztof Kozlowski wrote:
> On 28/08/2023 21:18, Sricharan Ramabadhran wrote:
>> IPQ5018 has tsens v1.0 block with 4 sensors and 1 interrupt.
>>
>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
>> ---
>>   .../bindings/thermal/qcom-tsens.yaml          | 19 +++++++++++++++++++
>>   1 file changed, 19 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> index 27e9e16e6455..2309bb6dce1b 100644
>> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>> @@ -42,6 +42,7 @@ properties:
>>                 - qcom,msm8956-tsens
>>                 - qcom,msm8976-tsens
>>                 - qcom,qcs404-tsens
>> +              - qcom,ipq5018-tsens
> 
> This does not look like placed in alphanumeric order.
> 

  ok, will sort.

>>             - const: qcom,tsens-v1
>>   
>>         - description: v2 of TSENS
>> @@ -409,4 +410,22 @@ examples:
>>              #qcom,sensors = <16>;
>>              #thermal-sensor-cells = <1>;
>>       };
>> +
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    // Example 5 (for any IPQ5018 based SoC-s):
> 
> No need for new example for a difference in compatible. Drop it.

  ok, will drop it.

Regards,
  Sricharan
Sricharan R Aug. 29, 2023, 6:03 a.m. UTC | #5 
On 8/29/2023 1:03 AM, Krzysztof Kozlowski wrote:
> On 28/08/2023 21:18, Sricharan Ramabadhran wrote:
>> IPQ5018 has tsens V1.0 IP with 4 sensors and 1 interrupt.
>>
>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
>> ---
>>   drivers/thermal/qcom/tsens.c | 3 +++
>>   1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
>> index f39495b61952..a24eb88b3444 100644
>> --- a/drivers/thermal/qcom/tsens.c
>> +++ b/drivers/thermal/qcom/tsens.c
>> @@ -1101,6 +1101,9 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
>>   
>>   static const struct of_device_id tsens_table[] = {
>>   	{
>> +		.compatible = "qcom,ipq5018-tsens",
>> +		.data = &data_ipq5018,
>> +	}, {
> 
> This patch does not make sense on its own. It must be squashed. You
> already brought the IPQ5018 in previous patch.
> 

  ok, will squash.

Regards,
  Sricharan
Sricharan R Aug. 29, 2023, 6:04 a.m. UTC | #6 
On 8/29/2023 12:55 AM, Krzysztof Kozlowski wrote:
> On 28/08/2023 21:18, Sricharan Ramabadhran wrote:
>> IPQ5018 has tsens V1.0 IP with 4 sensors.
>> There is no RPM, so tsens has to manually enabled.
>> Adding the tsens and nvmem node.
>>
>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/ipq5018.dtsi | 23 +++++++++++++++++++++++
>>   1 file changed, 23 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>> index 9f13d2dcdfd5..277b3cfc7f72 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>> @@ -93,6 +93,29 @@ soc: soc@0 {
>>   		#size-cells = <1>;
>>   		ranges = <0 0 0 0xffffffff>;
>>   
>> +		qfprom_nvmem: qfprom_nvmem@a0000 {
> 
> Nope. Come on, where do you see such node naming. Please do not send
> code from downstream, but work on upstream sources. Open other most
> recent DTS, take a look how it is done and try to do something similar.
> 

  sure, will fix it up.
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
> 
> compatible is always the first property. Then reg.

  ok, will fix.

Regards,
  Sricharan