diff mbox series

[v1] drm/msm/dp: do not reinitialize phy unless retry during link training

Message ID 1691533190-19335-1-git-send-email-quic_khsieh@quicinc.com
State Accepted
Commit 0c1a2e69bcb506f48ebf94bd199bab0b93f66da2
Headers show
Series [v1] drm/msm/dp: do not reinitialize phy unless retry during link training | expand

Commit Message

Kuogee Hsieh Aug. 8, 2023, 10:19 p.m. UTC
DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will
cause PLL unlocked initially and then PLL gets locked at the end of
initialization. PLL_UNLOCKED interrupt will fire during this time if the
interrupt mask is enabled.
However currently DP driver link training implementation incorrectly
re-initializes PHY unconditionally during link training as the PHY was
already configured in dp_ctrl_enable_mainlink_clocks().

Fix this by re-initializing the PHY only if the previous link training
failed.

[drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy

Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

Comments

Abhinav Kumar Aug. 25, 2023, 8:44 p.m. UTC | #1
On 8/8/2023 3:19 PM, Kuogee Hsieh wrote:
> DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will
> cause PLL unlocked initially and then PLL gets locked at the end of
> initialization. PLL_UNLOCKED interrupt will fire during this time if the
> interrupt mask is enabled.

There should be a line break here.

> However currently DP driver link training implementation incorrectly
> re-initializes PHY unconditionally during link training as the PHY was
> already configured in dp_ctrl_enable_mainlink_clocks().
> 
> Fix this by re-initializing the PHY only if the previous link training
> failed.
> 
> [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy
> 
> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>

I tested and confirm that without this patch, I see this spam atleast 
once per reboot but after this patch, I have not seen this for 5 
consecutive reboots.

Hence,

Tested-by: Abhinav Kumar <quic_abhinavk@quicinc.com> # sc7280

Looking at the code flow, the dp_ctrl_reinitialize_mainlink() certainly 
looks redundant where it is, considering that the clks were enabled just 
a couple of lines above in dp_ctrl_enable_mainlink_clocks().

Hence with the minor fix in the commit,

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>

> ---
>   drivers/gpu/drm/msm/dp/dp_ctrl.c | 13 ++++++-------
>   1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> index a7a5c7e..77a8d93 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -1774,13 +1774,6 @@ int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
>   		return rc;
>   
>   	while (--link_train_max_retries) {
> -		rc = dp_ctrl_reinitialize_mainlink(ctrl);
> -		if (rc) {
> -			DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n",
> -					rc);
> -			break;
> -		}
> -
>   		training_step = DP_TRAINING_NONE;
>   		rc = dp_ctrl_setup_main_link(ctrl, &training_step);
>   		if (rc == 0) {
> @@ -1832,6 +1825,12 @@ int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
>   			/* stop link training before start re training  */
>   			dp_ctrl_clear_training_pattern(ctrl);
>   		}
> +
> +		rc = dp_ctrl_reinitialize_mainlink(ctrl);
> +		if (rc) {
> +			DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n", rc);
> +			break;
> +		}
>   	}
>   
>   	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)
Stephen Boyd Aug. 25, 2023, 10:15 p.m. UTC | #2
Quoting Kuogee Hsieh (2023-08-08 15:19:50)
> DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will
> cause PLL unlocked initially and then PLL gets locked at the end of
> initialization. PLL_UNLOCKED interrupt will fire during this time if the
> interrupt mask is enabled.
> However currently DP driver link training implementation incorrectly
> re-initializes PHY unconditionally during link training as the PHY was
> already configured in dp_ctrl_enable_mainlink_clocks().
>
> Fix this by re-initializing the PHY only if the previous link training
> failed.
>
> [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy
>
> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Dmitry Baryshkov Sept. 3, 2023, 9:51 p.m. UTC | #3
On 09/08/2023 01:19, Kuogee Hsieh wrote:
> DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will
> cause PLL unlocked initially and then PLL gets locked at the end of
> initialization. PLL_UNLOCKED interrupt will fire during this time if the
> interrupt mask is enabled.
> However currently DP driver link training implementation incorrectly
> re-initializes PHY unconditionally during link training as the PHY was
> already configured in dp_ctrl_enable_mainlink_clocks().
> 
> Fix this by re-initializing the PHY only if the previous link training
> failed.
> 
> [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy
> 
> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>   drivers/gpu/drm/msm/dp/dp_ctrl.c | 13 ++++++-------
>   1 file changed, 6 insertions(+), 7 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Johan Hovold Oct. 3, 2023, 9:10 a.m. UTC | #4
On Tue, Aug 08, 2023 at 03:19:50PM -0700, Kuogee Hsieh wrote:
> DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will
> cause PLL unlocked initially and then PLL gets locked at the end of
> initialization. PLL_UNLOCKED interrupt will fire during this time if the
> interrupt mask is enabled.
> However currently DP driver link training implementation incorrectly
> re-initializes PHY unconditionally during link training as the PHY was
> already configured in dp_ctrl_enable_mainlink_clocks().
> 
> Fix this by re-initializing the PHY only if the previous link training
> failed.
> 
> [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy
> 
> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>

This fixes the above warning and avoids the unnecessary PHY power-off
and power-on during boot of the ThinkPad X13s:

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>

I guess this one should go to stable as well:

Cc: stable@vger.kernel.org	# 5.10

Is anyone planning on getting this fixed in 6.6-rc? I noticed that this
one still hasn't shown up linux-next.

> ---
>  drivers/gpu/drm/msm/dp/dp_ctrl.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> index a7a5c7e..77a8d93 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -1774,13 +1774,6 @@ int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
>  		return rc;
>  
>  	while (--link_train_max_retries) {
> -		rc = dp_ctrl_reinitialize_mainlink(ctrl);
> -		if (rc) {
> -			DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n",
> -					rc);
> -			break;
> -		}
> -
>  		training_step = DP_TRAINING_NONE;
>  		rc = dp_ctrl_setup_main_link(ctrl, &training_step);
>  		if (rc == 0) {
> @@ -1832,6 +1825,12 @@ int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
>  			/* stop link training before start re training  */
>  			dp_ctrl_clear_training_pattern(ctrl);
>  		}
> +
> +		rc = dp_ctrl_reinitialize_mainlink(ctrl);
> +		if (rc) {
> +			DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n", rc);
> +			break;
> +		}
>  	}
>  
>  	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)

Johan
Johan Hovold Oct. 13, 2023, 12:06 p.m. UTC | #5
On Tue, Oct 03, 2023 at 11:10:59AM +0200, Johan Hovold wrote:
> On Tue, Aug 08, 2023 at 03:19:50PM -0700, Kuogee Hsieh wrote:
> > DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will
> > cause PLL unlocked initially and then PLL gets locked at the end of
> > initialization. PLL_UNLOCKED interrupt will fire during this time if the
> > interrupt mask is enabled.
> > However currently DP driver link training implementation incorrectly
> > re-initializes PHY unconditionally during link training as the PHY was
> > already configured in dp_ctrl_enable_mainlink_clocks().
> > 
> > Fix this by re-initializing the PHY only if the previous link training
> > failed.
> > 
> > [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy
> > 
> > Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
> > Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30
> > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> 
> This fixes the above warning and avoids the unnecessary PHY power-off
> and power-on during boot of the ThinkPad X13s:
> 
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> Tested-by: Johan Hovold <johan+linaro@kernel.org>
> 
> I guess this one should go to stable as well:
> 
> Cc: stable@vger.kernel.org	# 5.10
> 
> Is anyone planning on getting this fixed in 6.6-rc? I noticed that this
> one still hasn't shown up linux-next.

For the record, this one showed up in a PR from Rob and has now been
forwarded to Linus.

No stable tag included, but I guess we can ping the stable team unless
AUTOSEL picks this up.

Johan
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index a7a5c7e..77a8d93 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1774,13 +1774,6 @@  int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
 		return rc;
 
 	while (--link_train_max_retries) {
-		rc = dp_ctrl_reinitialize_mainlink(ctrl);
-		if (rc) {
-			DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n",
-					rc);
-			break;
-		}
-
 		training_step = DP_TRAINING_NONE;
 		rc = dp_ctrl_setup_main_link(ctrl, &training_step);
 		if (rc == 0) {
@@ -1832,6 +1825,12 @@  int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
 			/* stop link training before start re training  */
 			dp_ctrl_clear_training_pattern(ctrl);
 		}
+
+		rc = dp_ctrl_reinitialize_mainlink(ctrl);
+		if (rc) {
+			DRM_ERROR("Failed to reinitialize mainlink. rc=%d\n", rc);
+			break;
+		}
 	}
 
 	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN)