Message ID | 20230817150824.14371-3-dmitry.baryshkov@linaro.org |
---|---|
State | Accepted |
Commit | 4b3cd783808bb327d931bbb1324d6c367443b721 |
Headers | show |
Series | usb: typec: qcom-pmic-typec: enable DP support | expand |
On Thu, Aug 17, 2023 at 06:08:24PM +0300, Dmitry Baryshkov wrote: > The current approach to handling DP on bridge-enabled platforms requires > a chain of DP bridges up to the USB-C connector. Register a last DRM > bridge for such chain. > > Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/usb/typec/tcpm/Kconfig | 1 + > drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 37 +++++++++++++++++++ > 2 files changed, 38 insertions(+) > > diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig > index 5d393f520fc2..0b2993fef564 100644 > --- a/drivers/usb/typec/tcpm/Kconfig > +++ b/drivers/usb/typec/tcpm/Kconfig > @@ -79,6 +79,7 @@ config TYPEC_WCOVE > config TYPEC_QCOM_PMIC > tristate "Qualcomm PMIC USB Type-C Port Controller Manager driver" > depends on ARCH_QCOM || COMPILE_TEST > + depends on DRM || DRM=n > help > A Type-C port and Power Delivery driver which aggregates two > discrete pieces of silicon in the PM8150b PMIC block: the Would it be an option to put the below in separate c file that you just compile based on CONFIG_DRM? obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom_pmic_tcpm.o qcom_pmic_tcpm-y += qcom_pmic_typec.o \ qcom_pmic_typec_port.o \ qcom_pmic_typec_pdphy.o ifneq ($(CONFIG_DRM),) qcom_pmic_tcpm-y += qcom_pmic_bridge_func.o endif Thouse ifdefs in c file just look a bit rough to me. > diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c > index af44ee4e6e86..581199d37b49 100644 > --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c > +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c > @@ -17,6 +17,9 @@ > #include <linux/usb/role.h> > #include <linux/usb/tcpm.h> > #include <linux/usb/typec_mux.h> > + > +#include <drm/drm_bridge.h> > + > #include "qcom_pmic_typec_pdphy.h" > #include "qcom_pmic_typec_port.h" > > @@ -33,6 +36,7 @@ struct pmic_typec { > struct pmic_typec_port *pmic_typec_port; > bool vbus_enabled; > struct mutex lock; /* VBUS state serialization */ > + struct drm_bridge bridge; > }; > > #define tcpc_to_tcpm(_tcpc_) container_of(_tcpc_, struct pmic_typec, tcpc) > @@ -146,6 +150,35 @@ static int qcom_pmic_typec_init(struct tcpc_dev *tcpc) > return 0; > } > > +#if IS_ENABLED(CONFIG_DRM) > +static int qcom_pmic_typec_attach(struct drm_bridge *bridge, > + enum drm_bridge_attach_flags flags) > +{ > + return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL; > +} > + > +static const struct drm_bridge_funcs qcom_pmic_typec_bridge_funcs = { > + .attach = qcom_pmic_typec_attach, > +}; > + > +static int qcom_pmic_typec_init_drm(struct pmic_typec *tcpm) > +{ > + tcpm->bridge.funcs = &qcom_pmic_typec_bridge_funcs; > +#ifdef CONFIG_OF > + tcpm->bridge.of_node = of_get_child_by_name(tcpm->dev->of_node, "connector"); > +#endif > + tcpm->bridge.ops = DRM_BRIDGE_OP_HPD; > + tcpm->bridge.type = DRM_MODE_CONNECTOR_DisplayPort; > + > + return devm_drm_bridge_add(tcpm->dev, &tcpm->bridge); > +} > +#else > +static int qcom_pmic_typec_init_drm(struct pmic_typec *tcpm) > +{ > + return 0; > +} > +#endif > + > static int qcom_pmic_typec_probe(struct platform_device *pdev) > { > struct pmic_typec *tcpm; > @@ -208,6 +241,10 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev) > mutex_init(&tcpm->lock); > platform_set_drvdata(pdev, tcpm); > > + ret = qcom_pmic_typec_init_drm(tcpm); > + if (ret) > + return ret; > + > tcpm->tcpc.fwnode = device_get_named_child_node(tcpm->dev, "connector"); > if (!tcpm->tcpc.fwnode) > return -EINVAL; thanks,
On 22/08/2023 14:54, Heikki Krogerus wrote: > On Thu, Aug 17, 2023 at 06:08:24PM +0300, Dmitry Baryshkov wrote: >> The current approach to handling DP on bridge-enabled platforms requires >> a chain of DP bridges up to the USB-C connector. Register a last DRM >> bridge for such chain. >> >> Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> >> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> >> --- >> drivers/usb/typec/tcpm/Kconfig | 1 + >> drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 37 +++++++++++++++++++ >> 2 files changed, 38 insertions(+) >> >> diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig >> index 5d393f520fc2..0b2993fef564 100644 >> --- a/drivers/usb/typec/tcpm/Kconfig >> +++ b/drivers/usb/typec/tcpm/Kconfig >> @@ -79,6 +79,7 @@ config TYPEC_WCOVE >> config TYPEC_QCOM_PMIC >> tristate "Qualcomm PMIC USB Type-C Port Controller Manager driver" >> depends on ARCH_QCOM || COMPILE_TEST >> + depends on DRM || DRM=n >> help >> A Type-C port and Power Delivery driver which aggregates two >> discrete pieces of silicon in the PM8150b PMIC block: the > > Would it be an option to put the below in separate c file that you > just compile based on CONFIG_DRM? > > obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom_pmic_tcpm.o > qcom_pmic_tcpm-y += qcom_pmic_typec.o \ > qcom_pmic_typec_port.o \ > qcom_pmic_typec_pdphy.o > ifneq ($(CONFIG_DRM),) > qcom_pmic_tcpm-y += qcom_pmic_bridge_func.o > endif > > Thouse ifdefs in c file just look a bit rough to me. +1 if that's possible. Sounds nice. --- bod
diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig index 5d393f520fc2..0b2993fef564 100644 --- a/drivers/usb/typec/tcpm/Kconfig +++ b/drivers/usb/typec/tcpm/Kconfig @@ -79,6 +79,7 @@ config TYPEC_WCOVE config TYPEC_QCOM_PMIC tristate "Qualcomm PMIC USB Type-C Port Controller Manager driver" depends on ARCH_QCOM || COMPILE_TEST + depends on DRM || DRM=n help A Type-C port and Power Delivery driver which aggregates two discrete pieces of silicon in the PM8150b PMIC block: the diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c index af44ee4e6e86..581199d37b49 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c @@ -17,6 +17,9 @@ #include <linux/usb/role.h> #include <linux/usb/tcpm.h> #include <linux/usb/typec_mux.h> + +#include <drm/drm_bridge.h> + #include "qcom_pmic_typec_pdphy.h" #include "qcom_pmic_typec_port.h" @@ -33,6 +36,7 @@ struct pmic_typec { struct pmic_typec_port *pmic_typec_port; bool vbus_enabled; struct mutex lock; /* VBUS state serialization */ + struct drm_bridge bridge; }; #define tcpc_to_tcpm(_tcpc_) container_of(_tcpc_, struct pmic_typec, tcpc) @@ -146,6 +150,35 @@ static int qcom_pmic_typec_init(struct tcpc_dev *tcpc) return 0; } +#if IS_ENABLED(CONFIG_DRM) +static int qcom_pmic_typec_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL; +} + +static const struct drm_bridge_funcs qcom_pmic_typec_bridge_funcs = { + .attach = qcom_pmic_typec_attach, +}; + +static int qcom_pmic_typec_init_drm(struct pmic_typec *tcpm) +{ + tcpm->bridge.funcs = &qcom_pmic_typec_bridge_funcs; +#ifdef CONFIG_OF + tcpm->bridge.of_node = of_get_child_by_name(tcpm->dev->of_node, "connector"); +#endif + tcpm->bridge.ops = DRM_BRIDGE_OP_HPD; + tcpm->bridge.type = DRM_MODE_CONNECTOR_DisplayPort; + + return devm_drm_bridge_add(tcpm->dev, &tcpm->bridge); +} +#else +static int qcom_pmic_typec_init_drm(struct pmic_typec *tcpm) +{ + return 0; +} +#endif + static int qcom_pmic_typec_probe(struct platform_device *pdev) { struct pmic_typec *tcpm; @@ -208,6 +241,10 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev) mutex_init(&tcpm->lock); platform_set_drvdata(pdev, tcpm); + ret = qcom_pmic_typec_init_drm(tcpm); + if (ret) + return ret; + tcpm->tcpc.fwnode = device_get_named_child_node(tcpm->dev, "connector"); if (!tcpm->tcpc.fwnode) return -EINVAL;