diff mbox series

ARM: dts: hisilicon: Fix "status" values

Message ID 20230626221019.3946448-1-robh@kernel.org
State Accepted
Commit e0d64db2a8c298990f3c1436b3ffd45e73c6dcb1
Headers show
Series ARM: dts: hisilicon: Fix "status" values | expand

Commit Message

Rob Herring (Arm) June 26, 2023, 10:10 p.m. UTC
The defined value for "status" is "disabled", not "disable".

Signed-off-by: Rob Herring <robh@kernel.org>
---
 arch/arm/boot/dts/hisilicon/hi3519.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

Comments

Wei Xu July 19, 2023, 7:43 a.m. UTC | #1
Hi Rob,

On 2023/6/27 6:10, Rob Herring wrote:
> The defined value for "status" is "disabled", not "disable".
> 
> Signed-off-by: Rob Herring <robh@kernel.org>

Applied to the HiSilicon arm32 dt tree.
Thanks!

Best Regards,
Wei

> ---
>  arch/arm/boot/dts/hisilicon/hi3519.dtsi | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/hisilicon/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
> index c524c854d319..a42b71cdc5d7 100644
> --- a/arch/arm/boot/dts/hisilicon/hi3519.dtsi
> +++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
> @@ -54,7 +54,7 @@ uart0: serial@12100000 {
>  			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		uart1: serial@12101000 {
> @@ -63,7 +63,7 @@ uart1: serial@12101000 {
>  			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		uart2: serial@12102000 {
> @@ -72,7 +72,7 @@ uart2: serial@12102000 {
>  			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		uart3: serial@12103000 {
> @@ -81,7 +81,7 @@ uart3: serial@12103000 {
>  			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		uart4: serial@12104000 {
> @@ -90,7 +90,7 @@ uart4: serial@12104000 {
>  			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		dual_timer0: timer@12000000 {
> @@ -100,7 +100,7 @@ dual_timer0: timer@12000000 {
>  			reg = <0x12000000 0x1000>;
>  			clocks = <&clk_3m>;
>  			clock-names = "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		dual_timer1: timer@12001000 {
> @@ -110,7 +110,7 @@ dual_timer1: timer@12001000 {
>  			reg = <0x12001000 0x1000>;
>  			clocks = <&clk_3m>;
>  			clock-names = "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		dual_timer2: timer@12002000 {
> @@ -120,7 +120,7 @@ dual_timer2: timer@12002000 {
>  			reg = <0x12002000 0x1000>;
>  			clocks = <&clk_3m>;
>  			clock-names = "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		spi_bus0: spi@12120000 {
> @@ -132,7 +132,7 @@ spi_bus0: spi@12120000 {
>  			num-cs = <1>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		spi_bus1: spi@12121000 {
> @@ -144,7 +144,7 @@ spi_bus1: spi@12121000 {
>  			num-cs = <1>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		spi_bus2: spi@12122000 {
> @@ -156,7 +156,7 @@ spi_bus2: spi@12122000 {
>  			num-cs = <1>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		sysctrl: system-controller@12020000 {
>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/hisilicon/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
index c524c854d319..a42b71cdc5d7 100644
--- a/arch/arm/boot/dts/hisilicon/hi3519.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
@@ -54,7 +54,7 @@  uart0: serial@12100000 {
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart1: serial@12101000 {
@@ -63,7 +63,7 @@  uart1: serial@12101000 {
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart2: serial@12102000 {
@@ -72,7 +72,7 @@  uart2: serial@12102000 {
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart3: serial@12103000 {
@@ -81,7 +81,7 @@  uart3: serial@12103000 {
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		uart4: serial@12104000 {
@@ -90,7 +90,7 @@  uart4: serial@12104000 {
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
 			clock-names = "uartclk", "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer0: timer@12000000 {
@@ -100,7 +100,7 @@  dual_timer0: timer@12000000 {
 			reg = <0x12000000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer1: timer@12001000 {
@@ -110,7 +110,7 @@  dual_timer1: timer@12001000 {
 			reg = <0x12001000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer2: timer@12002000 {
@@ -120,7 +120,7 @@  dual_timer2: timer@12002000 {
 			reg = <0x12002000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus0: spi@12120000 {
@@ -132,7 +132,7 @@  spi_bus0: spi@12120000 {
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus1: spi@12121000 {
@@ -144,7 +144,7 @@  spi_bus1: spi@12121000 {
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus2: spi@12122000 {
@@ -156,7 +156,7 @@  spi_bus2: spi@12122000 {
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		sysctrl: system-controller@12020000 {