| Message ID | 1688122331-25478-5-git-send-email-quic_krichai@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | PCCI: EPC: Add support to wake up host from D3 states | expand |
On Fri, Jun 30, 2023 at 04:22:07PM +0530, Krishna chaitanya chundru wrote: > Endpoint cannot send any data/MSI when the D-state is in > D3cold or D3hot. Endpoint needs to bring the host back to D0 Endpoint needs to wake up the host to bring the D-state to D0 > to send any kind of data. > > Endpoint can toggle wake signal when the D-state is in D3cold and vaux is > not supplied or can send inband PME. > > To support this adding wake up host to epc core. > "add wakeup_host() callback to the EPC core". > Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> > --- > Documentation/PCI/endpoint/pci-endpoint.rst | 6 ++++++ > drivers/pci/endpoint/pci-epc-core.c | 31 +++++++++++++++++++++++++++++ > include/linux/pci-epc.h | 11 ++++++++++ > 3 files changed, 48 insertions(+) > > diff --git a/Documentation/PCI/endpoint/pci-endpoint.rst b/Documentation/PCI/endpoint/pci-endpoint.rst > index 0538cdc..186ce3b 100644 > --- a/Documentation/PCI/endpoint/pci-endpoint.rst > +++ b/Documentation/PCI/endpoint/pci-endpoint.rst > @@ -53,6 +53,7 @@ by the PCI controller driver. > * raise_irq: ops to raise a legacy, MSI or MSI-X interrupt > * start: ops to start the PCI link > * stop: ops to stop the PCI link > + * wakeup_host: ops to wake host wakeup > > The PCI controller driver can then create a new EPC device by invoking > devm_pci_epc_create()/pci_epc_create(). > @@ -122,6 +123,11 @@ by the PCI endpoint function driver. > The PCI endpoint function driver should use pci_epc_mem_free_addr() to > free the memory space allocated using pci_epc_mem_alloc_addr(). > > +* pci_epc_wakeup_host() > + > + The PCI endpoint function driver should use pci_epc_wakeup_host() to wake wakeup > + host. > + > Other EPC APIs > ~~~~~~~~~~~~~~ > > diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c > index cad360f..23599b8 100644 > --- a/drivers/pci/endpoint/pci-epc-core.c > +++ b/drivers/pci/endpoint/pci-epc-core.c > @@ -167,6 +167,37 @@ const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc, > EXPORT_SYMBOL_GPL(pci_epc_get_features); > > /** > + * pci_epc_wakeup_host() - Wakeup the host > + * @epc: the EPC device which has to wake the host wakeup > + * @func_no: the physical endpoint function number in the EPC device > + * @vfunc_no: the virtual endpoint function number in the physical function > + * @type: specify the type of wakeup: WAKEUP_FROM_D3COLD, WAKEUP_FROM_D3HOT > + * > + * Invoke to wakeup host > + */ > +int pci_epc_wakeup_host(struct pci_epc *epc, u8 func_no, u8 vfunc_no, > + enum pci_epc_wakeup_host_type type) Why can't you use a bool? - Mani > +{ > + int ret; > + > + if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions) > + return -EINVAL; > + > + if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no])) > + return -EINVAL; > + > + if (!epc->ops->wakeup_host) > + return 0; > + > + mutex_lock(&epc->lock); > + ret = epc->ops->wakeup_host(epc, func_no, vfunc_no, type); > + mutex_unlock(&epc->lock); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(pci_epc_wakeup_host); > + > +/** > * pci_epc_stop() - stop the PCI link > * @epc: the link of the EPC device that has to be stopped > * > diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h > index 26a1108..2323a10 100644 > --- a/include/linux/pci-epc.h > +++ b/include/linux/pci-epc.h > @@ -26,6 +26,12 @@ enum pci_epc_irq_type { > PCI_EPC_IRQ_MSIX, > }; > > +enum pci_epc_wakeup_host_type { > + PCI_WAKEUP_UNKNOWN, > + PCI_WAKEUP_SEND_PME, > + PCI_WAKEUP_TOGGLE_WAKE, > +}; > + > static inline const char * > pci_epc_interface_string(enum pci_epc_interface_type type) > { > @@ -59,6 +65,7 @@ pci_epc_interface_string(enum pci_epc_interface_type type) > * @start: ops to start the PCI link > * @stop: ops to stop the PCI link > * @get_features: ops to get the features supported by the EPC > + * @wakeup_host: ops to wakeup the host > * @owner: the module owner containing the ops > */ > struct pci_epc_ops { > @@ -88,6 +95,8 @@ struct pci_epc_ops { > void (*stop)(struct pci_epc *epc); > const struct pci_epc_features* (*get_features)(struct pci_epc *epc, > u8 func_no, u8 vfunc_no); > + int (*wakeup_host)(struct pci_epc *epc, u8 func_no, u8 vfunc_no, > + enum pci_epc_wakeup_host_type type); > struct module *owner; > }; > > @@ -234,6 +243,8 @@ int pci_epc_start(struct pci_epc *epc); > void pci_epc_stop(struct pci_epc *epc); > const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc, > u8 func_no, u8 vfunc_no); > +int pci_epc_wakeup_host(struct pci_epc *epc, u8 func_no, u8 vfunc_no, > + enum pci_epc_wakeup_host_type type); > enum pci_barno > pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features); > enum pci_barno pci_epc_get_next_free_bar(const struct pci_epc_features > -- > 2.7.4 >
On 7/7/2023 11:34 AM, Manivannan Sadhasivam wrote: > On Fri, Jun 30, 2023 at 04:22:07PM +0530, Krishna chaitanya chundru wrote: >> Endpoint cannot send any data/MSI when the D-state is in >> D3cold or D3hot. Endpoint needs to bring the host back to D0 > Endpoint needs to wake up the host to bring the D-state to D0 > >> to send any kind of data. >> >> Endpoint can toggle wake signal when the D-state is in D3cold and vaux is >> not supplied or can send inband PME. >> >> To support this adding wake up host to epc core. >> > "add wakeup_host() callback to the EPC core". > > >> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> >> --- >> Documentation/PCI/endpoint/pci-endpoint.rst | 6 ++++++ >> drivers/pci/endpoint/pci-epc-core.c | 31 +++++++++++++++++++++++++++++ >> include/linux/pci-epc.h | 11 ++++++++++ >> 3 files changed, 48 insertions(+) >> >> diff --git a/Documentation/PCI/endpoint/pci-endpoint.rst b/Documentation/PCI/endpoint/pci-endpoint.rst >> index 0538cdc..186ce3b 100644 >> --- a/Documentation/PCI/endpoint/pci-endpoint.rst >> +++ b/Documentation/PCI/endpoint/pci-endpoint.rst >> @@ -53,6 +53,7 @@ by the PCI controller driver. >> * raise_irq: ops to raise a legacy, MSI or MSI-X interrupt >> * start: ops to start the PCI link >> * stop: ops to stop the PCI link >> + * wakeup_host: ops to wake host > wakeup > >> >> The PCI controller driver can then create a new EPC device by invoking >> devm_pci_epc_create()/pci_epc_create(). >> @@ -122,6 +123,11 @@ by the PCI endpoint function driver. >> The PCI endpoint function driver should use pci_epc_mem_free_addr() to >> free the memory space allocated using pci_epc_mem_alloc_addr(). >> >> +* pci_epc_wakeup_host() >> + >> + The PCI endpoint function driver should use pci_epc_wakeup_host() to wake > wakeup > >> + host. >> + >> Other EPC APIs >> ~~~~~~~~~~~~~~ >> >> diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c >> index cad360f..23599b8 100644 >> --- a/drivers/pci/endpoint/pci-epc-core.c >> +++ b/drivers/pci/endpoint/pci-epc-core.c >> @@ -167,6 +167,37 @@ const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc, >> EXPORT_SYMBOL_GPL(pci_epc_get_features); >> >> /** >> + * pci_epc_wakeup_host() - Wakeup the host >> + * @epc: the EPC device which has to wake the host > wakeup > >> + * @func_no: the physical endpoint function number in the EPC device >> + * @vfunc_no: the virtual endpoint function number in the physical function >> + * @type: specify the type of wakeup: WAKEUP_FROM_D3COLD, WAKEUP_FROM_D3HOT >> + * >> + * Invoke to wakeup host >> + */ >> +int pci_epc_wakeup_host(struct pci_epc *epc, u8 func_no, u8 vfunc_no, >> + enum pci_epc_wakeup_host_type type) > Why can't you use a bool? > > - Mani Sure I will change it to bool as suggested. - KC > >> +{ >> + int ret; >> + >> + if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions) >> + return -EINVAL; >> + >> + if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no])) >> + return -EINVAL; >> + >> + if (!epc->ops->wakeup_host) >> + return 0; >> + >> + mutex_lock(&epc->lock); >> + ret = epc->ops->wakeup_host(epc, func_no, vfunc_no, type); >> + mutex_unlock(&epc->lock); >> + >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(pci_epc_wakeup_host); >> + >> +/** >> * pci_epc_stop() - stop the PCI link >> * @epc: the link of the EPC device that has to be stopped >> * >> diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h >> index 26a1108..2323a10 100644 >> --- a/include/linux/pci-epc.h >> +++ b/include/linux/pci-epc.h >> @@ -26,6 +26,12 @@ enum pci_epc_irq_type { >> PCI_EPC_IRQ_MSIX, >> }; >> >> +enum pci_epc_wakeup_host_type { >> + PCI_WAKEUP_UNKNOWN, >> + PCI_WAKEUP_SEND_PME, >> + PCI_WAKEUP_TOGGLE_WAKE, >> +}; >> + >> static inline const char * >> pci_epc_interface_string(enum pci_epc_interface_type type) >> { >> @@ -59,6 +65,7 @@ pci_epc_interface_string(enum pci_epc_interface_type type) >> * @start: ops to start the PCI link >> * @stop: ops to stop the PCI link >> * @get_features: ops to get the features supported by the EPC >> + * @wakeup_host: ops to wakeup the host >> * @owner: the module owner containing the ops >> */ >> struct pci_epc_ops { >> @@ -88,6 +95,8 @@ struct pci_epc_ops { >> void (*stop)(struct pci_epc *epc); >> const struct pci_epc_features* (*get_features)(struct pci_epc *epc, >> u8 func_no, u8 vfunc_no); >> + int (*wakeup_host)(struct pci_epc *epc, u8 func_no, u8 vfunc_no, >> + enum pci_epc_wakeup_host_type type); >> struct module *owner; >> }; >> >> @@ -234,6 +243,8 @@ int pci_epc_start(struct pci_epc *epc); >> void pci_epc_stop(struct pci_epc *epc); >> const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc, >> u8 func_no, u8 vfunc_no); >> +int pci_epc_wakeup_host(struct pci_epc *epc, u8 func_no, u8 vfunc_no, >> + enum pci_epc_wakeup_host_type type); >> enum pci_barno >> pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features); >> enum pci_barno pci_epc_get_next_free_bar(const struct pci_epc_features >> -- >> 2.7.4 >>
diff --git a/Documentation/PCI/endpoint/pci-endpoint.rst b/Documentation/PCI/endpoint/pci-endpoint.rst index 0538cdc..186ce3b 100644 --- a/Documentation/PCI/endpoint/pci-endpoint.rst +++ b/Documentation/PCI/endpoint/pci-endpoint.rst @@ -53,6 +53,7 @@ by the PCI controller driver. * raise_irq: ops to raise a legacy, MSI or MSI-X interrupt * start: ops to start the PCI link * stop: ops to stop the PCI link + * wakeup_host: ops to wake host The PCI controller driver can then create a new EPC device by invoking devm_pci_epc_create()/pci_epc_create(). @@ -122,6 +123,11 @@ by the PCI endpoint function driver. The PCI endpoint function driver should use pci_epc_mem_free_addr() to free the memory space allocated using pci_epc_mem_alloc_addr(). +* pci_epc_wakeup_host() + + The PCI endpoint function driver should use pci_epc_wakeup_host() to wake + host. + Other EPC APIs ~~~~~~~~~~~~~~ diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c index cad360f..23599b8 100644 --- a/drivers/pci/endpoint/pci-epc-core.c +++ b/drivers/pci/endpoint/pci-epc-core.c @@ -167,6 +167,37 @@ const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc, EXPORT_SYMBOL_GPL(pci_epc_get_features); /** + * pci_epc_wakeup_host() - Wakeup the host + * @epc: the EPC device which has to wake the host + * @func_no: the physical endpoint function number in the EPC device + * @vfunc_no: the virtual endpoint function number in the physical function + * @type: specify the type of wakeup: WAKEUP_FROM_D3COLD, WAKEUP_FROM_D3HOT + * + * Invoke to wakeup host + */ +int pci_epc_wakeup_host(struct pci_epc *epc, u8 func_no, u8 vfunc_no, + enum pci_epc_wakeup_host_type type) +{ + int ret; + + if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions) + return -EINVAL; + + if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no])) + return -EINVAL; + + if (!epc->ops->wakeup_host) + return 0; + + mutex_lock(&epc->lock); + ret = epc->ops->wakeup_host(epc, func_no, vfunc_no, type); + mutex_unlock(&epc->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(pci_epc_wakeup_host); + +/** * pci_epc_stop() - stop the PCI link * @epc: the link of the EPC device that has to be stopped * diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h index 26a1108..2323a10 100644 --- a/include/linux/pci-epc.h +++ b/include/linux/pci-epc.h @@ -26,6 +26,12 @@ enum pci_epc_irq_type { PCI_EPC_IRQ_MSIX, }; +enum pci_epc_wakeup_host_type { + PCI_WAKEUP_UNKNOWN, + PCI_WAKEUP_SEND_PME, + PCI_WAKEUP_TOGGLE_WAKE, +}; + static inline const char * pci_epc_interface_string(enum pci_epc_interface_type type) { @@ -59,6 +65,7 @@ pci_epc_interface_string(enum pci_epc_interface_type type) * @start: ops to start the PCI link * @stop: ops to stop the PCI link * @get_features: ops to get the features supported by the EPC + * @wakeup_host: ops to wakeup the host * @owner: the module owner containing the ops */ struct pci_epc_ops { @@ -88,6 +95,8 @@ struct pci_epc_ops { void (*stop)(struct pci_epc *epc); const struct pci_epc_features* (*get_features)(struct pci_epc *epc, u8 func_no, u8 vfunc_no); + int (*wakeup_host)(struct pci_epc *epc, u8 func_no, u8 vfunc_no, + enum pci_epc_wakeup_host_type type); struct module *owner; }; @@ -234,6 +243,8 @@ int pci_epc_start(struct pci_epc *epc); void pci_epc_stop(struct pci_epc *epc); const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc, u8 func_no, u8 vfunc_no); +int pci_epc_wakeup_host(struct pci_epc *epc, u8 func_no, u8 vfunc_no, + enum pci_epc_wakeup_host_type type); enum pci_barno pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features); enum pci_barno pci_epc_get_next_free_bar(const struct pci_epc_features
Endpoint cannot send any data/MSI when the D-state is in D3cold or D3hot. Endpoint needs to bring the host back to D0 to send any kind of data. Endpoint can toggle wake signal when the D-state is in D3cold and vaux is not supplied or can send inband PME. To support this adding wake up host to epc core. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> --- Documentation/PCI/endpoint/pci-endpoint.rst | 6 ++++++ drivers/pci/endpoint/pci-epc-core.c | 31 +++++++++++++++++++++++++++++ include/linux/pci-epc.h | 11 ++++++++++ 3 files changed, 48 insertions(+)