| Message ID | 20230702182308.7583-1-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | ad5d960168303a172b69bdf3708fecffb0810948 |
| Headers | show |
| Series | dt-bindings: cleanup DTS example whitespaces | expand |
On Sun, 2 Jul 2023 at 19:23, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > The DTS code coding style expects spaces around '=' sign. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Rob, > > Maybe this could go via your tree? Rebased on your for-next: > v6.4-rc2-45-gf0ac35049606 > --- > .../bindings/arm/arm,coresight-cti.yaml | 18 +++++++++--------- > .../bindings/arm/keystone/ti,sci.yaml | 8 ++++---- > .../devicetree/bindings/display/msm/gmu.yaml | 2 +- > .../display/panel/samsung,s6e8aa0.yaml | 2 +- > .../display/rockchip/rockchip-vop.yaml | 4 ++-- > .../bindings/iio/adc/ti,adc108s102.yaml | 2 +- > .../bindings/media/renesas,rzg2l-cru.yaml | 4 ++-- > .../devicetree/bindings/media/renesas,vin.yaml | 4 ++-- > .../devicetree/bindings/mtd/mtd-physmap.yaml | 2 +- > .../bindings/net/mediatek-dwmac.yaml | 2 +- > .../bindings/perf/amlogic,g12-ddr-pmu.yaml | 4 ++-- > .../bindings/phy/mediatek,dsi-phy.yaml | 2 +- > .../remoteproc/amlogic,meson-mx-ao-arc.yaml | 2 +- > .../devicetree/bindings/usb/mediatek,mtu3.yaml | 2 +- > .../devicetree/bindings/usb/ti,am62-usb.yaml | 2 +- > 15 files changed, 30 insertions(+), 30 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > index 0c5b875cb654..d6c84b6e7fe6 100644 > --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > @@ -287,7 +287,7 @@ examples: > arm,trig-in-sigs = <0 1>; > arm,trig-in-types = <PE_DBGTRIGGER > PE_PMUIRQ>; > - arm,trig-out-sigs=<0 1 2 >; > + arm,trig-out-sigs = <0 1 2 >; > arm,trig-out-types = <PE_EDBGREQ > PE_DBGRESTART > PE_CTIIRQ>; > @@ -309,24 +309,24 @@ examples: > > trig-conns@0 { > reg = <0>; > - arm,trig-in-sigs=<0>; > - arm,trig-in-types=<GEN_INTREQ>; > - arm,trig-out-sigs=<0>; > - arm,trig-out-types=<GEN_HALTREQ>; > + arm,trig-in-sigs = <0>; > + arm,trig-in-types = <GEN_INTREQ>; > + arm,trig-out-sigs = <0>; > + arm,trig-out-types = <GEN_HALTREQ>; > arm,trig-conn-name = "sys_profiler"; > }; > > trig-conns@1 { > reg = <1>; > - arm,trig-out-sigs=<2 3>; > - arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; > + arm,trig-out-sigs = <2 3>; > + arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>; > arm,trig-conn-name = "watchdog"; > }; > > trig-conns@2 { > reg = <2>; > - arm,trig-in-sigs=<1 6>; > - arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; > + arm,trig-in-sigs = <1 6>; > + arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>; > arm,trig-conn-name = "g_counter"; > }; > }; for above CTI chagnes Acked-by: Mike Leach <mike.leach@linaro.org> > diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml > index 91b96065f7df..86b59de7707e 100644 > --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml > +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml > @@ -96,8 +96,8 @@ examples: > compatible = "ti,k2g-sci"; > ti,system-reboot-controller; > mbox-names = "rx", "tx"; > - mboxes= <&msgmgr 5 2>, > - <&msgmgr 0 0>; > + mboxes = <&msgmgr 5 2>, > + <&msgmgr 0 0>; > reg-names = "debug_messages"; > reg = <0x02921800 0x800>; > }; > @@ -107,8 +107,8 @@ examples: > compatible = "ti,k2g-sci"; > ti,host-id = <12>; > mbox-names = "rx", "tx"; > - mboxes= <&secure_proxy_main 11>, > - <&secure_proxy_main 13>; > + mboxes = <&secure_proxy_main 11>, > + <&secure_proxy_main 13>; > reg-names = "debug_messages"; > reg = <0x44083000 0x1000>; > > diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml > index 029d72822d8b..65b02c7a1211 100644 > --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml > +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml > @@ -225,7 +225,7 @@ examples: > #include <dt-bindings/interrupt-controller/arm-gic.h> > > gmu: gmu@506a000 { > - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; > + compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; > > reg = <0x506a000 0x30000>, > <0xb280000 0x10000>, > diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > index 1cdc91b3439f..200fbf1c74a0 100644 > --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > @@ -74,7 +74,7 @@ examples: > vdd3-supply = <&vcclcd_reg>; > vci-supply = <&vlcd_reg>; > reset-gpios = <&gpy4 5 0>; > - power-on-delay= <50>; > + power-on-delay = <50>; > reset-delay = <100>; > init-delay = <100>; > panel-width-mm = <58>; > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > index 6f43d885c9b3..df61cb5f5c54 100644 > --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > @@ -121,11 +121,11 @@ examples: > #size-cells = <0>; > vopb_out_edp: endpoint@0 { > reg = <0>; > - remote-endpoint=<&edp_in_vopb>; > + remote-endpoint = <&edp_in_vopb>; > }; > vopb_out_hdmi: endpoint@1 { > reg = <1>; > - remote-endpoint=<&hdmi_in_vopb>; > + remote-endpoint = <&hdmi_in_vopb>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml > index 9b072b057f16..a60b1e100ee4 100644 > --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml > @@ -35,7 +35,7 @@ unevaluatedProperties: false > examples: > - | > spi { > - #address-cells= <1>; > + #address-cells = <1>; > #size-cells = <0>; > > adc@0 { > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > index 7dde7967c886..1e72b8808d24 100644 > --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > @@ -137,7 +137,7 @@ examples: > > cru_parallel_in: endpoint@0 { > reg = <0>; > - remote-endpoint= <&ov5642>; > + remote-endpoint = <&ov5642>; > hsync-active = <1>; > vsync-active = <1>; > }; > @@ -150,7 +150,7 @@ examples: > > cru_csi_in: endpoint@0 { > reg = <0>; > - remote-endpoint= <&csi_cru_in>; > + remote-endpoint = <&csi_cru_in>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml > index 91e8f368fb52..324703bfb1bd 100644 > --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml > +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml > @@ -303,11 +303,11 @@ examples: > > vin0csi20: endpoint@0 { > reg = <0>; > - remote-endpoint= <&csi20vin0>; > + remote-endpoint = <&csi20vin0>; > }; > vin0csi40: endpoint@2 { > reg = <2>; > - remote-endpoint= <&csi40vin0>; > + remote-endpoint = <&csi40vin0>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml > index f8c976898a95..18f6733408b4 100644 > --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml > +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml > @@ -164,7 +164,7 @@ examples: > reg = <0 0xf80000>; > }; > firmware@f80000 { > - label ="firmware"; > + label = "firmware"; > reg = <0xf80000 0x80000>; > read-only; > }; > diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml > index 0fa2132fa4f4..400aedb58205 100644 > --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml > +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml > @@ -156,7 +156,7 @@ examples: > reg = <0x1101c000 0x1300>; > interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; > interrupt-names = "macirq"; > - phy-mode ="rgmii-rxid"; > + phy-mode = "rgmii-rxid"; > mac-address = [00 55 7b b5 7d f7]; > clock-names = "axi", > "apb", > diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml > index 50f46a6898b1..4adab0149108 100644 > --- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml > +++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml > @@ -42,8 +42,8 @@ examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > pmu { > - #address-cells=<2>; > - #size-cells=<2>; > + #address-cells = <2>; > + #size-cells = <2>; > > pmu@ff638000 { > compatible = "amlogic,g12a-ddr-pmu"; > diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > index 26f2b887cfc1..b8d77165c4a1 100644 > --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > @@ -83,7 +83,7 @@ examples: > clocks = <&clk26m>; > clock-output-names = "mipi_tx0_pll"; > drive-strength-microamp = <4000>; > - nvmem-cells= <&mipi_tx_calibration>; > + nvmem-cells = <&mipi_tx_calibration>; > nvmem-cell-names = "calibration-data"; > #clock-cells = <0>; > #phy-cells = <0>; > diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml > index 3100cb870170..76e8ca44906a 100644 > --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml > @@ -75,7 +75,7 @@ additionalProperties: false > examples: > - | > remoteproc@1c { > - compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; > + compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; > reg = <0x1c 0x8>, <0x38 0x8>; > reg-names = "remap", "cpu"; > resets = <&media_cpu_reset>; > diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml > index 478214ab045e..a59d91243ac8 100644 > --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml > +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml > @@ -304,7 +304,7 @@ examples: > # Dual role switch with type-c > - | > usb@11201000 { > - compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; > + compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3"; > reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>; > reg-names = "mac", "ippc"; > interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; > diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > index d25fc708e32c..fec5651f5602 100644 > --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > @@ -92,7 +92,7 @@ examples: > > usb@31100000 { > compatible = "snps,dwc3"; > - reg =<0x00 0x31100000 0x00 0x50000>; > + reg = <0x00 0x31100000 0x00 0x50000>; > interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ > <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ > interrupt-names = "host", "peripheral"; > -- > 2.34.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On Sun, 2 Jul 2023 20:23:08 +0200 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > The DTS code coding style expects spaces around '=' sign. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > For the IIO one. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Thanks for tidying these up. Jonathan > --- > > Rob, > > Maybe this could go via your tree? Rebased on your for-next: > v6.4-rc2-45-gf0ac35049606 > --- > .../bindings/arm/arm,coresight-cti.yaml | 18 +++++++++--------- > .../bindings/arm/keystone/ti,sci.yaml | 8 ++++---- > .../devicetree/bindings/display/msm/gmu.yaml | 2 +- > .../display/panel/samsung,s6e8aa0.yaml | 2 +- > .../display/rockchip/rockchip-vop.yaml | 4 ++-- > .../bindings/iio/adc/ti,adc108s102.yaml | 2 +- > .../bindings/media/renesas,rzg2l-cru.yaml | 4 ++-- > .../devicetree/bindings/media/renesas,vin.yaml | 4 ++-- > .../devicetree/bindings/mtd/mtd-physmap.yaml | 2 +- > .../bindings/net/mediatek-dwmac.yaml | 2 +- > .../bindings/perf/amlogic,g12-ddr-pmu.yaml | 4 ++-- > .../bindings/phy/mediatek,dsi-phy.yaml | 2 +- > .../remoteproc/amlogic,meson-mx-ao-arc.yaml | 2 +- > .../devicetree/bindings/usb/mediatek,mtu3.yaml | 2 +- > .../devicetree/bindings/usb/ti,am62-usb.yaml | 2 +- > 15 files changed, 30 insertions(+), 30 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > index 0c5b875cb654..d6c84b6e7fe6 100644 > --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > @@ -287,7 +287,7 @@ examples: > arm,trig-in-sigs = <0 1>; > arm,trig-in-types = <PE_DBGTRIGGER > PE_PMUIRQ>; > - arm,trig-out-sigs=<0 1 2 >; > + arm,trig-out-sigs = <0 1 2 >; > arm,trig-out-types = <PE_EDBGREQ > PE_DBGRESTART > PE_CTIIRQ>; > @@ -309,24 +309,24 @@ examples: > > trig-conns@0 { > reg = <0>; > - arm,trig-in-sigs=<0>; > - arm,trig-in-types=<GEN_INTREQ>; > - arm,trig-out-sigs=<0>; > - arm,trig-out-types=<GEN_HALTREQ>; > + arm,trig-in-sigs = <0>; > + arm,trig-in-types = <GEN_INTREQ>; > + arm,trig-out-sigs = <0>; > + arm,trig-out-types = <GEN_HALTREQ>; > arm,trig-conn-name = "sys_profiler"; > }; > > trig-conns@1 { > reg = <1>; > - arm,trig-out-sigs=<2 3>; > - arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; > + arm,trig-out-sigs = <2 3>; > + arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>; > arm,trig-conn-name = "watchdog"; > }; > > trig-conns@2 { > reg = <2>; > - arm,trig-in-sigs=<1 6>; > - arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; > + arm,trig-in-sigs = <1 6>; > + arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>; > arm,trig-conn-name = "g_counter"; > }; > }; > diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml > index 91b96065f7df..86b59de7707e 100644 > --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml > +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml > @@ -96,8 +96,8 @@ examples: > compatible = "ti,k2g-sci"; > ti,system-reboot-controller; > mbox-names = "rx", "tx"; > - mboxes= <&msgmgr 5 2>, > - <&msgmgr 0 0>; > + mboxes = <&msgmgr 5 2>, > + <&msgmgr 0 0>; > reg-names = "debug_messages"; > reg = <0x02921800 0x800>; > }; > @@ -107,8 +107,8 @@ examples: > compatible = "ti,k2g-sci"; > ti,host-id = <12>; > mbox-names = "rx", "tx"; > - mboxes= <&secure_proxy_main 11>, > - <&secure_proxy_main 13>; > + mboxes = <&secure_proxy_main 11>, > + <&secure_proxy_main 13>; > reg-names = "debug_messages"; > reg = <0x44083000 0x1000>; > > diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml > index 029d72822d8b..65b02c7a1211 100644 > --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml > +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml > @@ -225,7 +225,7 @@ examples: > #include <dt-bindings/interrupt-controller/arm-gic.h> > > gmu: gmu@506a000 { > - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; > + compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; > > reg = <0x506a000 0x30000>, > <0xb280000 0x10000>, > diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > index 1cdc91b3439f..200fbf1c74a0 100644 > --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > @@ -74,7 +74,7 @@ examples: > vdd3-supply = <&vcclcd_reg>; > vci-supply = <&vlcd_reg>; > reset-gpios = <&gpy4 5 0>; > - power-on-delay= <50>; > + power-on-delay = <50>; > reset-delay = <100>; > init-delay = <100>; > panel-width-mm = <58>; > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > index 6f43d885c9b3..df61cb5f5c54 100644 > --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > @@ -121,11 +121,11 @@ examples: > #size-cells = <0>; > vopb_out_edp: endpoint@0 { > reg = <0>; > - remote-endpoint=<&edp_in_vopb>; > + remote-endpoint = <&edp_in_vopb>; > }; > vopb_out_hdmi: endpoint@1 { > reg = <1>; > - remote-endpoint=<&hdmi_in_vopb>; > + remote-endpoint = <&hdmi_in_vopb>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml > index 9b072b057f16..a60b1e100ee4 100644 > --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml > @@ -35,7 +35,7 @@ unevaluatedProperties: false > examples: > - | > spi { > - #address-cells= <1>; > + #address-cells = <1>; > #size-cells = <0>; > > adc@0 { > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > index 7dde7967c886..1e72b8808d24 100644 > --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > @@ -137,7 +137,7 @@ examples: > > cru_parallel_in: endpoint@0 { > reg = <0>; > - remote-endpoint= <&ov5642>; > + remote-endpoint = <&ov5642>; > hsync-active = <1>; > vsync-active = <1>; > }; > @@ -150,7 +150,7 @@ examples: > > cru_csi_in: endpoint@0 { > reg = <0>; > - remote-endpoint= <&csi_cru_in>; > + remote-endpoint = <&csi_cru_in>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml > index 91e8f368fb52..324703bfb1bd 100644 > --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml > +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml > @@ -303,11 +303,11 @@ examples: > > vin0csi20: endpoint@0 { > reg = <0>; > - remote-endpoint= <&csi20vin0>; > + remote-endpoint = <&csi20vin0>; > }; > vin0csi40: endpoint@2 { > reg = <2>; > - remote-endpoint= <&csi40vin0>; > + remote-endpoint = <&csi40vin0>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml > index f8c976898a95..18f6733408b4 100644 > --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml > +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml > @@ -164,7 +164,7 @@ examples: > reg = <0 0xf80000>; > }; > firmware@f80000 { > - label ="firmware"; > + label = "firmware"; > reg = <0xf80000 0x80000>; > read-only; > }; > diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml > index 0fa2132fa4f4..400aedb58205 100644 > --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml > +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml > @@ -156,7 +156,7 @@ examples: > reg = <0x1101c000 0x1300>; > interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; > interrupt-names = "macirq"; > - phy-mode ="rgmii-rxid"; > + phy-mode = "rgmii-rxid"; > mac-address = [00 55 7b b5 7d f7]; > clock-names = "axi", > "apb", > diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml > index 50f46a6898b1..4adab0149108 100644 > --- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml > +++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml > @@ -42,8 +42,8 @@ examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > pmu { > - #address-cells=<2>; > - #size-cells=<2>; > + #address-cells = <2>; > + #size-cells = <2>; > > pmu@ff638000 { > compatible = "amlogic,g12a-ddr-pmu"; > diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > index 26f2b887cfc1..b8d77165c4a1 100644 > --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > @@ -83,7 +83,7 @@ examples: > clocks = <&clk26m>; > clock-output-names = "mipi_tx0_pll"; > drive-strength-microamp = <4000>; > - nvmem-cells= <&mipi_tx_calibration>; > + nvmem-cells = <&mipi_tx_calibration>; > nvmem-cell-names = "calibration-data"; > #clock-cells = <0>; > #phy-cells = <0>; > diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml > index 3100cb870170..76e8ca44906a 100644 > --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml > @@ -75,7 +75,7 @@ additionalProperties: false > examples: > - | > remoteproc@1c { > - compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; > + compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; > reg = <0x1c 0x8>, <0x38 0x8>; > reg-names = "remap", "cpu"; > resets = <&media_cpu_reset>; > diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml > index 478214ab045e..a59d91243ac8 100644 > --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml > +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml > @@ -304,7 +304,7 @@ examples: > # Dual role switch with type-c > - | > usb@11201000 { > - compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; > + compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3"; > reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>; > reg-names = "mac", "ippc"; > interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; > diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > index d25fc708e32c..fec5651f5602 100644 > --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > @@ -92,7 +92,7 @@ examples: > > usb@31100000 { > compatible = "snps,dwc3"; > - reg =<0x00 0x31100000 0x00 0x50000>; > + reg = <0x00 0x31100000 0x00 0x50000>; > interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ > <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ > interrupt-names = "host", "peripheral";
On 02/07/2023 20:23, Krzysztof Kozlowski wrote: > The DTS code coding style expects spaces around '=' sign. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Rob, > > Maybe this could go via your tree? Rebased on your for-next: > v6.4-rc2-45-gf0ac35049606 > --- > .../bindings/arm/arm,coresight-cti.yaml | 18 +++++++++--------- > .../bindings/arm/keystone/ti,sci.yaml | 8 ++++---- > .../devicetree/bindings/display/msm/gmu.yaml | 2 +- > .../display/panel/samsung,s6e8aa0.yaml | 2 +- > .../display/rockchip/rockchip-vop.yaml | 4 ++-- > .../bindings/iio/adc/ti,adc108s102.yaml | 2 +- > .../bindings/media/renesas,rzg2l-cru.yaml | 4 ++-- > .../devicetree/bindings/media/renesas,vin.yaml | 4 ++-- > .../devicetree/bindings/mtd/mtd-physmap.yaml | 2 +- > .../bindings/net/mediatek-dwmac.yaml | 2 +- > .../bindings/perf/amlogic,g12-ddr-pmu.yaml | 4 ++-- > .../bindings/phy/mediatek,dsi-phy.yaml | 2 +- > .../remoteproc/amlogic,meson-mx-ao-arc.yaml | 2 +- For amlogic ones: Acked-by: Neil Armstrong <neil.armstrong@linaro.org> > .../devicetree/bindings/usb/mediatek,mtu3.yaml | 2 +- > .../devicetree/bindings/usb/ti,am62-usb.yaml | 2 +- > 15 files changed, 30 insertions(+), 30 deletions(-) > <snip>
On Sun, Jul 02, 2023 at 08:23:08PM +0200, Krzysztof Kozlowski wrote: > The DTS code coding style expects spaces around '=' sign. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Rob, > > Maybe this could go via your tree? Rebased on your for-next: > v6.4-rc2-45-gf0ac35049606 > --- > .../bindings/arm/arm,coresight-cti.yaml | 18 +++++++++--------- > .../bindings/arm/keystone/ti,sci.yaml | 8 ++++---- > .../devicetree/bindings/display/msm/gmu.yaml | 2 +- > .../display/panel/samsung,s6e8aa0.yaml | 2 +- > .../display/rockchip/rockchip-vop.yaml | 4 ++-- > .../bindings/iio/adc/ti,adc108s102.yaml | 2 +- > .../bindings/media/renesas,rzg2l-cru.yaml | 4 ++-- > .../devicetree/bindings/media/renesas,vin.yaml | 4 ++-- > .../devicetree/bindings/mtd/mtd-physmap.yaml | 2 +- > .../bindings/net/mediatek-dwmac.yaml | 2 +- > .../bindings/perf/amlogic,g12-ddr-pmu.yaml | 4 ++-- > .../bindings/phy/mediatek,dsi-phy.yaml | 2 +- > .../remoteproc/amlogic,meson-mx-ao-arc.yaml | 2 +- > .../devicetree/bindings/usb/mediatek,mtu3.yaml | 2 +- > .../devicetree/bindings/usb/ti,am62-usb.yaml | 2 +- > 15 files changed, 30 insertions(+), 30 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > index 0c5b875cb654..d6c84b6e7fe6 100644 > --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > @@ -287,7 +287,7 @@ examples: > arm,trig-in-sigs = <0 1>; > arm,trig-in-types = <PE_DBGTRIGGER > PE_PMUIRQ>; > - arm,trig-out-sigs=<0 1 2 >; > + arm,trig-out-sigs = <0 1 2 >; > arm,trig-out-types = <PE_EDBGREQ > PE_DBGRESTART > PE_CTIIRQ>; > @@ -309,24 +309,24 @@ examples: > > trig-conns@0 { > reg = <0>; > - arm,trig-in-sigs=<0>; > - arm,trig-in-types=<GEN_INTREQ>; > - arm,trig-out-sigs=<0>; > - arm,trig-out-types=<GEN_HALTREQ>; > + arm,trig-in-sigs = <0>; > + arm,trig-in-types = <GEN_INTREQ>; > + arm,trig-out-sigs = <0>; > + arm,trig-out-types = <GEN_HALTREQ>; > arm,trig-conn-name = "sys_profiler"; > }; > > trig-conns@1 { > reg = <1>; > - arm,trig-out-sigs=<2 3>; > - arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; > + arm,trig-out-sigs = <2 3>; > + arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>; > arm,trig-conn-name = "watchdog"; > }; > > trig-conns@2 { > reg = <2>; > - arm,trig-in-sigs=<1 6>; > - arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; > + arm,trig-in-sigs = <1 6>; > + arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>; > arm,trig-conn-name = "g_counter"; > }; > }; > diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml > index 91b96065f7df..86b59de7707e 100644 > --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml > +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml > @@ -96,8 +96,8 @@ examples: > compatible = "ti,k2g-sci"; > ti,system-reboot-controller; > mbox-names = "rx", "tx"; > - mboxes= <&msgmgr 5 2>, > - <&msgmgr 0 0>; > + mboxes = <&msgmgr 5 2>, > + <&msgmgr 0 0>; > reg-names = "debug_messages"; > reg = <0x02921800 0x800>; > }; > @@ -107,8 +107,8 @@ examples: > compatible = "ti,k2g-sci"; > ti,host-id = <12>; > mbox-names = "rx", "tx"; > - mboxes= <&secure_proxy_main 11>, > - <&secure_proxy_main 13>; > + mboxes = <&secure_proxy_main 11>, > + <&secure_proxy_main 13>; > reg-names = "debug_messages"; > reg = <0x44083000 0x1000>; > > diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml > index 029d72822d8b..65b02c7a1211 100644 > --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml > +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml > @@ -225,7 +225,7 @@ examples: > #include <dt-bindings/interrupt-controller/arm-gic.h> > > gmu: gmu@506a000 { > - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; > + compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; > > reg = <0x506a000 0x30000>, > <0xb280000 0x10000>, > diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > index 1cdc91b3439f..200fbf1c74a0 100644 > --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > @@ -74,7 +74,7 @@ examples: > vdd3-supply = <&vcclcd_reg>; > vci-supply = <&vlcd_reg>; > reset-gpios = <&gpy4 5 0>; > - power-on-delay= <50>; > + power-on-delay = <50>; > reset-delay = <100>; > init-delay = <100>; > panel-width-mm = <58>; > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > index 6f43d885c9b3..df61cb5f5c54 100644 > --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > @@ -121,11 +121,11 @@ examples: > #size-cells = <0>; > vopb_out_edp: endpoint@0 { > reg = <0>; > - remote-endpoint=<&edp_in_vopb>; > + remote-endpoint = <&edp_in_vopb>; > }; > vopb_out_hdmi: endpoint@1 { > reg = <1>; > - remote-endpoint=<&hdmi_in_vopb>; > + remote-endpoint = <&hdmi_in_vopb>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml > index 9b072b057f16..a60b1e100ee4 100644 > --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml > @@ -35,7 +35,7 @@ unevaluatedProperties: false > examples: > - | > spi { > - #address-cells= <1>; > + #address-cells = <1>; > #size-cells = <0>; > > adc@0 { > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > index 7dde7967c886..1e72b8808d24 100644 > --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > @@ -137,7 +137,7 @@ examples: > > cru_parallel_in: endpoint@0 { > reg = <0>; > - remote-endpoint= <&ov5642>; > + remote-endpoint = <&ov5642>; > hsync-active = <1>; > vsync-active = <1>; > }; > @@ -150,7 +150,7 @@ examples: > > cru_csi_in: endpoint@0 { > reg = <0>; > - remote-endpoint= <&csi_cru_in>; > + remote-endpoint = <&csi_cru_in>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml > index 91e8f368fb52..324703bfb1bd 100644 > --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml > +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml > @@ -303,11 +303,11 @@ examples: > > vin0csi20: endpoint@0 { > reg = <0>; > - remote-endpoint= <&csi20vin0>; > + remote-endpoint = <&csi20vin0>; > }; > vin0csi40: endpoint@2 { > reg = <2>; > - remote-endpoint= <&csi40vin0>; > + remote-endpoint = <&csi40vin0>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml > index f8c976898a95..18f6733408b4 100644 > --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml > +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml > @@ -164,7 +164,7 @@ examples: > reg = <0 0xf80000>; > }; > firmware@f80000 { > - label ="firmware"; > + label = "firmware"; > reg = <0xf80000 0x80000>; > read-only; > }; > diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml > index 0fa2132fa4f4..400aedb58205 100644 > --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml > +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml > @@ -156,7 +156,7 @@ examples: > reg = <0x1101c000 0x1300>; > interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; > interrupt-names = "macirq"; > - phy-mode ="rgmii-rxid"; > + phy-mode = "rgmii-rxid"; > mac-address = [00 55 7b b5 7d f7]; > clock-names = "axi", > "apb", > diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml > index 50f46a6898b1..4adab0149108 100644 > --- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml > +++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml > @@ -42,8 +42,8 @@ examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > pmu { > - #address-cells=<2>; > - #size-cells=<2>; > + #address-cells = <2>; > + #size-cells = <2>; > > pmu@ff638000 { > compatible = "amlogic,g12a-ddr-pmu"; > diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > index 26f2b887cfc1..b8d77165c4a1 100644 > --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > @@ -83,7 +83,7 @@ examples: > clocks = <&clk26m>; > clock-output-names = "mipi_tx0_pll"; > drive-strength-microamp = <4000>; > - nvmem-cells= <&mipi_tx_calibration>; > + nvmem-cells = <&mipi_tx_calibration>; > nvmem-cell-names = "calibration-data"; > #clock-cells = <0>; > #phy-cells = <0>; > diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml > index 3100cb870170..76e8ca44906a 100644 > --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml > @@ -75,7 +75,7 @@ additionalProperties: false > examples: > - | > remoteproc@1c { > - compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; > + compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> > reg = <0x1c 0x8>, <0x38 0x8>; > reg-names = "remap", "cpu"; > resets = <&media_cpu_reset>; > diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml > index 478214ab045e..a59d91243ac8 100644 > --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml > +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml > @@ -304,7 +304,7 @@ examples: > # Dual role switch with type-c > - | > usb@11201000 { > - compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; > + compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3"; > reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>; > reg-names = "mac", "ippc"; > interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; > diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > index d25fc708e32c..fec5651f5602 100644 > --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > @@ -92,7 +92,7 @@ examples: > > usb@31100000 { > compatible = "snps,dwc3"; > - reg =<0x00 0x31100000 0x00 0x50000>; > + reg = <0x00 0x31100000 0x00 0x50000>; > interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ > <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ > interrupt-names = "host", "peripheral"; > -- > 2.34.1 >
On Sun, Jul 02, 2023 at 08:23:08PM +0200, Krzysztof Kozlowski wrote: > The DTS code coding style expects spaces around '=' sign. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Cheers, Conor.
On 02-07-23, 20:23, Krzysztof Kozlowski wrote: > The DTS code coding style expects spaces around '=' sign. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Rob, > > Maybe this could go via your tree? Rebased on your for-next: > v6.4-rc2-45-gf0ac35049606 > --- > .../bindings/arm/arm,coresight-cti.yaml | 18 +++++++++--------- > .../bindings/arm/keystone/ti,sci.yaml | 8 ++++---- > .../devicetree/bindings/display/msm/gmu.yaml | 2 +- > .../display/panel/samsung,s6e8aa0.yaml | 2 +- > .../display/rockchip/rockchip-vop.yaml | 4 ++-- > .../bindings/iio/adc/ti,adc108s102.yaml | 2 +- > .../bindings/media/renesas,rzg2l-cru.yaml | 4 ++-- > .../devicetree/bindings/media/renesas,vin.yaml | 4 ++-- > .../devicetree/bindings/mtd/mtd-physmap.yaml | 2 +- > .../bindings/net/mediatek-dwmac.yaml | 2 +- > .../bindings/perf/amlogic,g12-ddr-pmu.yaml | 4 ++-- > .../bindings/phy/mediatek,dsi-phy.yaml | 2 +- Acked-by: Vinod Koul <vkoul@kernel.org>
On 02/07/2023 20:23, Krzysztof Kozlowski wrote: > The DTS code coding style expects spaces around '=' sign. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Rob, > > Maybe this could go via your tree? Rebased on your for-next: > v6.4-rc2-45-gf0ac35049606 > --- [...] > .../bindings/net/mediatek-dwmac.yaml | 2 +- [...] > .../bindings/phy/mediatek,dsi-phy.yaml | 2 +- [...] > .../devicetree/bindings/usb/mediatek,mtu3.yaml | 2 +- > .../devicetree/bindings/usb/ti,am62-usb.yaml | 2 +- For MediaTek parts: Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> > 15 files changed, 30 insertions(+), 30 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > index 0c5b875cb654..d6c84b6e7fe6 100644 > --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > @@ -287,7 +287,7 @@ examples: > arm,trig-in-sigs = <0 1>; > arm,trig-in-types = <PE_DBGTRIGGER > PE_PMUIRQ>; > - arm,trig-out-sigs=<0 1 2 >; > + arm,trig-out-sigs = <0 1 2 >; > arm,trig-out-types = <PE_EDBGREQ > PE_DBGRESTART > PE_CTIIRQ>; > @@ -309,24 +309,24 @@ examples: > > trig-conns@0 { > reg = <0>; > - arm,trig-in-sigs=<0>; > - arm,trig-in-types=<GEN_INTREQ>; > - arm,trig-out-sigs=<0>; > - arm,trig-out-types=<GEN_HALTREQ>; > + arm,trig-in-sigs = <0>; > + arm,trig-in-types = <GEN_INTREQ>; > + arm,trig-out-sigs = <0>; > + arm,trig-out-types = <GEN_HALTREQ>; > arm,trig-conn-name = "sys_profiler"; > }; > > trig-conns@1 { > reg = <1>; > - arm,trig-out-sigs=<2 3>; > - arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; > + arm,trig-out-sigs = <2 3>; > + arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>; > arm,trig-conn-name = "watchdog"; > }; > > trig-conns@2 { > reg = <2>; > - arm,trig-in-sigs=<1 6>; > - arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; > + arm,trig-in-sigs = <1 6>; > + arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>; > arm,trig-conn-name = "g_counter"; > }; > }; > diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml > index 91b96065f7df..86b59de7707e 100644 > --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml > +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml > @@ -96,8 +96,8 @@ examples: > compatible = "ti,k2g-sci"; > ti,system-reboot-controller; > mbox-names = "rx", "tx"; > - mboxes= <&msgmgr 5 2>, > - <&msgmgr 0 0>; > + mboxes = <&msgmgr 5 2>, > + <&msgmgr 0 0>; > reg-names = "debug_messages"; > reg = <0x02921800 0x800>; > }; > @@ -107,8 +107,8 @@ examples: > compatible = "ti,k2g-sci"; > ti,host-id = <12>; > mbox-names = "rx", "tx"; > - mboxes= <&secure_proxy_main 11>, > - <&secure_proxy_main 13>; > + mboxes = <&secure_proxy_main 11>, > + <&secure_proxy_main 13>; > reg-names = "debug_messages"; > reg = <0x44083000 0x1000>; > > diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml > index 029d72822d8b..65b02c7a1211 100644 > --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml > +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml > @@ -225,7 +225,7 @@ examples: > #include <dt-bindings/interrupt-controller/arm-gic.h> > > gmu: gmu@506a000 { > - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; > + compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; > > reg = <0x506a000 0x30000>, > <0xb280000 0x10000>, > diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > index 1cdc91b3439f..200fbf1c74a0 100644 > --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml > @@ -74,7 +74,7 @@ examples: > vdd3-supply = <&vcclcd_reg>; > vci-supply = <&vlcd_reg>; > reset-gpios = <&gpy4 5 0>; > - power-on-delay= <50>; > + power-on-delay = <50>; > reset-delay = <100>; > init-delay = <100>; > panel-width-mm = <58>; > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > index 6f43d885c9b3..df61cb5f5c54 100644 > --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml > @@ -121,11 +121,11 @@ examples: > #size-cells = <0>; > vopb_out_edp: endpoint@0 { > reg = <0>; > - remote-endpoint=<&edp_in_vopb>; > + remote-endpoint = <&edp_in_vopb>; > }; > vopb_out_hdmi: endpoint@1 { > reg = <1>; > - remote-endpoint=<&hdmi_in_vopb>; > + remote-endpoint = <&hdmi_in_vopb>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml > index 9b072b057f16..a60b1e100ee4 100644 > --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml > @@ -35,7 +35,7 @@ unevaluatedProperties: false > examples: > - | > spi { > - #address-cells= <1>; > + #address-cells = <1>; > #size-cells = <0>; > > adc@0 { > diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > index 7dde7967c886..1e72b8808d24 100644 > --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml > @@ -137,7 +137,7 @@ examples: > > cru_parallel_in: endpoint@0 { > reg = <0>; > - remote-endpoint= <&ov5642>; > + remote-endpoint = <&ov5642>; > hsync-active = <1>; > vsync-active = <1>; > }; > @@ -150,7 +150,7 @@ examples: > > cru_csi_in: endpoint@0 { > reg = <0>; > - remote-endpoint= <&csi_cru_in>; > + remote-endpoint = <&csi_cru_in>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml > index 91e8f368fb52..324703bfb1bd 100644 > --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml > +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml > @@ -303,11 +303,11 @@ examples: > > vin0csi20: endpoint@0 { > reg = <0>; > - remote-endpoint= <&csi20vin0>; > + remote-endpoint = <&csi20vin0>; > }; > vin0csi40: endpoint@2 { > reg = <2>; > - remote-endpoint= <&csi40vin0>; > + remote-endpoint = <&csi40vin0>; > }; > }; > }; > diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml > index f8c976898a95..18f6733408b4 100644 > --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml > +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml > @@ -164,7 +164,7 @@ examples: > reg = <0 0xf80000>; > }; > firmware@f80000 { > - label ="firmware"; > + label = "firmware"; > reg = <0xf80000 0x80000>; > read-only; > }; > diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml > index 0fa2132fa4f4..400aedb58205 100644 > --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml > +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml > @@ -156,7 +156,7 @@ examples: > reg = <0x1101c000 0x1300>; > interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; > interrupt-names = "macirq"; > - phy-mode ="rgmii-rxid"; > + phy-mode = "rgmii-rxid"; > mac-address = [00 55 7b b5 7d f7]; > clock-names = "axi", > "apb", > diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml > index 50f46a6898b1..4adab0149108 100644 > --- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml > +++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml > @@ -42,8 +42,8 @@ examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > pmu { > - #address-cells=<2>; > - #size-cells=<2>; > + #address-cells = <2>; > + #size-cells = <2>; > > pmu@ff638000 { > compatible = "amlogic,g12a-ddr-pmu"; > diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > index 26f2b887cfc1..b8d77165c4a1 100644 > --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml > @@ -83,7 +83,7 @@ examples: > clocks = <&clk26m>; > clock-output-names = "mipi_tx0_pll"; > drive-strength-microamp = <4000>; > - nvmem-cells= <&mipi_tx_calibration>; > + nvmem-cells = <&mipi_tx_calibration>; > nvmem-cell-names = "calibration-data"; > #clock-cells = <0>; > #phy-cells = <0>; > diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml > index 3100cb870170..76e8ca44906a 100644 > --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml > @@ -75,7 +75,7 @@ additionalProperties: false > examples: > - | > remoteproc@1c { > - compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; > + compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; > reg = <0x1c 0x8>, <0x38 0x8>; > reg-names = "remap", "cpu"; > resets = <&media_cpu_reset>; > diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml > index 478214ab045e..a59d91243ac8 100644 > --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml > +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml > @@ -304,7 +304,7 @@ examples: > # Dual role switch with type-c > - | > usb@11201000 { > - compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; > + compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3"; > reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>; > reg-names = "mac", "ippc"; > interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; > diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > index d25fc708e32c..fec5651f5602 100644 > --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml > @@ -92,7 +92,7 @@ examples: > > usb@31100000 { > compatible = "snps,dwc3"; > - reg =<0x00 0x31100000 0x00 0x50000>; > + reg = <0x00 0x31100000 0x00 0x50000>; > interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ > <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ > interrupt-names = "host", "peripheral";
On Sun, 2 Jul 2023 at 21:23, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > The DTS code coding style expects spaces around '=' sign. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Rob, > > Maybe this could go via your tree? Rebased on your for-next: > v6.4-rc2-45-gf0ac35049606 > --- > .../bindings/arm/arm,coresight-cti.yaml | 18 +++++++++--------- > .../bindings/arm/keystone/ti,sci.yaml | 8 ++++---- > .../devicetree/bindings/display/msm/gmu.yaml | 2 +- Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm > .../display/panel/samsung,s6e8aa0.yaml | 2 +- > .../display/rockchip/rockchip-vop.yaml | 4 ++-- > .../bindings/iio/adc/ti,adc108s102.yaml | 2 +- > .../bindings/media/renesas,rzg2l-cru.yaml | 4 ++-- > .../devicetree/bindings/media/renesas,vin.yaml | 4 ++-- > .../devicetree/bindings/mtd/mtd-physmap.yaml | 2 +- > .../bindings/net/mediatek-dwmac.yaml | 2 +- > .../bindings/perf/amlogic,g12-ddr-pmu.yaml | 4 ++-- > .../bindings/phy/mediatek,dsi-phy.yaml | 2 +- > .../remoteproc/amlogic,meson-mx-ao-arc.yaml | 2 +- > .../devicetree/bindings/usb/mediatek,mtu3.yaml | 2 +- > .../devicetree/bindings/usb/ti,am62-usb.yaml | 2 +- > 15 files changed, 30 insertions(+), 30 deletions(-)
On Sun, 2 Jul 2023 at 20:24, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > The DTS code coding style expects spaces around '=' sign. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Rob, > > Maybe this could go via your tree? Rebased on your for-next: > v6.4-rc2-45-gf0ac35049606 > --- > .../bindings/arm/arm,coresight-cti.yaml | 18 +++++++++--------- > .../bindings/arm/keystone/ti,sci.yaml | 8 ++++---- > .../devicetree/bindings/display/msm/gmu.yaml | 2 +- > .../display/panel/samsung,s6e8aa0.yaml | 2 +- > .../display/rockchip/rockchip-vop.yaml | 4 ++-- > .../bindings/iio/adc/ti,adc108s102.yaml | 2 +- > .../bindings/media/renesas,rzg2l-cru.yaml | 4 ++-- > .../devicetree/bindings/media/renesas,vin.yaml | 4 ++-- > .../devicetree/bindings/mtd/mtd-physmap.yaml | 2 +- > .../bindings/net/mediatek-dwmac.yaml | 2 +- > .../bindings/perf/amlogic,g12-ddr-pmu.yaml | 4 ++-- > .../bindings/phy/mediatek,dsi-phy.yaml | 2 +- > .../remoteproc/amlogic,meson-mx-ao-arc.yaml | 2 +- > .../devicetree/bindings/usb/mediatek,mtu3.yaml | 2 +- > .../devicetree/bindings/usb/ti,am62-usb.yaml | 2 +- > 15 files changed, 30 insertions(+), 30 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > index 0c5b875cb654..d6c84b6e7fe6 100644 > --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml > @@ -287,7 +287,7 @@ examples: > arm,trig-in-sigs = <0 1>; > arm,trig-in-types = <PE_DBGTRIGGER > PE_PMUIRQ>; > - arm,trig-out-sigs=<0 1 2 >; > + arm,trig-out-sigs = <0 1 2 >; There's a space before the closing > you could drop as well. Best Regards, Jonas
On Sun, 02 Jul 2023 20:23:08 +0200, Krzysztof Kozlowski wrote: > The DTS code coding style expects spaces around '=' sign. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Rob, > > Maybe this could go via your tree? Rebased on your for-next: > v6.4-rc2-45-gf0ac35049606 > --- > .../bindings/arm/arm,coresight-cti.yaml | 18 +++++++++--------- > .../bindings/arm/keystone/ti,sci.yaml | 8 ++++---- > .../devicetree/bindings/display/msm/gmu.yaml | 2 +- > .../display/panel/samsung,s6e8aa0.yaml | 2 +- > .../display/rockchip/rockchip-vop.yaml | 4 ++-- > .../bindings/iio/adc/ti,adc108s102.yaml | 2 +- > .../bindings/media/renesas,rzg2l-cru.yaml | 4 ++-- > .../devicetree/bindings/media/renesas,vin.yaml | 4 ++-- > .../devicetree/bindings/mtd/mtd-physmap.yaml | 2 +- > .../bindings/net/mediatek-dwmac.yaml | 2 +- > .../bindings/perf/amlogic,g12-ddr-pmu.yaml | 4 ++-- > .../bindings/phy/mediatek,dsi-phy.yaml | 2 +- > .../remoteproc/amlogic,meson-mx-ao-arc.yaml | 2 +- > .../devicetree/bindings/usb/mediatek,mtu3.yaml | 2 +- > .../devicetree/bindings/usb/ti,am62-usb.yaml | 2 +- > 15 files changed, 30 insertions(+), 30 deletions(-) > Applied, thanks!
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml index 0c5b875cb654..d6c84b6e7fe6 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml @@ -287,7 +287,7 @@ examples: arm,trig-in-sigs = <0 1>; arm,trig-in-types = <PE_DBGTRIGGER PE_PMUIRQ>; - arm,trig-out-sigs=<0 1 2 >; + arm,trig-out-sigs = <0 1 2 >; arm,trig-out-types = <PE_EDBGREQ PE_DBGRESTART PE_CTIIRQ>; @@ -309,24 +309,24 @@ examples: trig-conns@0 { reg = <0>; - arm,trig-in-sigs=<0>; - arm,trig-in-types=<GEN_INTREQ>; - arm,trig-out-sigs=<0>; - arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-in-sigs = <0>; + arm,trig-in-types = <GEN_INTREQ>; + arm,trig-out-sigs = <0>; + arm,trig-out-types = <GEN_HALTREQ>; arm,trig-conn-name = "sys_profiler"; }; trig-conns@1 { reg = <1>; - arm,trig-out-sigs=<2 3>; - arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-out-sigs = <2 3>; + arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>; arm,trig-conn-name = "watchdog"; }; trig-conns@2 { reg = <2>; - arm,trig-in-sigs=<1 6>; - arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-in-sigs = <1 6>; + arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>; arm,trig-conn-name = "g_counter"; }; }; diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml index 91b96065f7df..86b59de7707e 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml @@ -96,8 +96,8 @@ examples: compatible = "ti,k2g-sci"; ti,system-reboot-controller; mbox-names = "rx", "tx"; - mboxes= <&msgmgr 5 2>, - <&msgmgr 0 0>; + mboxes = <&msgmgr 5 2>, + <&msgmgr 0 0>; reg-names = "debug_messages"; reg = <0x02921800 0x800>; }; @@ -107,8 +107,8 @@ examples: compatible = "ti,k2g-sci"; ti,host-id = <12>; mbox-names = "rx", "tx"; - mboxes= <&secure_proxy_main 11>, - <&secure_proxy_main 13>; + mboxes = <&secure_proxy_main 11>, + <&secure_proxy_main 13>; reg-names = "debug_messages"; reg = <0x44083000 0x1000>; diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index 029d72822d8b..65b02c7a1211 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -225,7 +225,7 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> gmu: gmu@506a000 { - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; reg = <0x506a000 0x30000>, <0xb280000 0x10000>, diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml index 1cdc91b3439f..200fbf1c74a0 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -74,7 +74,7 @@ examples: vdd3-supply = <&vcclcd_reg>; vci-supply = <&vlcd_reg>; reset-gpios = <&gpy4 5 0>; - power-on-delay= <50>; + power-on-delay = <50>; reset-delay = <100>; init-delay = <100>; panel-width-mm = <58>; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml index 6f43d885c9b3..df61cb5f5c54 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml @@ -121,11 +121,11 @@ examples: #size-cells = <0>; vopb_out_edp: endpoint@0 { reg = <0>; - remote-endpoint=<&edp_in_vopb>; + remote-endpoint = <&edp_in_vopb>; }; vopb_out_hdmi: endpoint@1 { reg = <1>; - remote-endpoint=<&hdmi_in_vopb>; + remote-endpoint = <&hdmi_in_vopb>; }; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml index 9b072b057f16..a60b1e100ee4 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml @@ -35,7 +35,7 @@ unevaluatedProperties: false examples: - | spi { - #address-cells= <1>; + #address-cells = <1>; #size-cells = <0>; adc@0 { diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml index 7dde7967c886..1e72b8808d24 100644 --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml @@ -137,7 +137,7 @@ examples: cru_parallel_in: endpoint@0 { reg = <0>; - remote-endpoint= <&ov5642>; + remote-endpoint = <&ov5642>; hsync-active = <1>; vsync-active = <1>; }; @@ -150,7 +150,7 @@ examples: cru_csi_in: endpoint@0 { reg = <0>; - remote-endpoint= <&csi_cru_in>; + remote-endpoint = <&csi_cru_in>; }; }; }; diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index 91e8f368fb52..324703bfb1bd 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -303,11 +303,11 @@ examples: vin0csi20: endpoint@0 { reg = <0>; - remote-endpoint= <&csi20vin0>; + remote-endpoint = <&csi20vin0>; }; vin0csi40: endpoint@2 { reg = <2>; - remote-endpoint= <&csi40vin0>; + remote-endpoint = <&csi40vin0>; }; }; }; diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml index f8c976898a95..18f6733408b4 100644 --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml @@ -164,7 +164,7 @@ examples: reg = <0 0xf80000>; }; firmware@f80000 { - label ="firmware"; + label = "firmware"; reg = <0xf80000 0x80000>; read-only; }; diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml index 0fa2132fa4f4..400aedb58205 100644 --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml @@ -156,7 +156,7 @@ examples: reg = <0x1101c000 0x1300>; interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "macirq"; - phy-mode ="rgmii-rxid"; + phy-mode = "rgmii-rxid"; mac-address = [00 55 7b b5 7d f7]; clock-names = "axi", "apb", diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml index 50f46a6898b1..4adab0149108 100644 --- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml +++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml @@ -42,8 +42,8 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> pmu { - #address-cells=<2>; - #size-cells=<2>; + #address-cells = <2>; + #size-cells = <2>; pmu@ff638000 { compatible = "amlogic,g12a-ddr-pmu"; diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml index 26f2b887cfc1..b8d77165c4a1 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml @@ -83,7 +83,7 @@ examples: clocks = <&clk26m>; clock-output-names = "mipi_tx0_pll"; drive-strength-microamp = <4000>; - nvmem-cells= <&mipi_tx_calibration>; + nvmem-cells = <&mipi_tx_calibration>; nvmem-cell-names = "calibration-data"; #clock-cells = <0>; #phy-cells = <0>; diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml index 3100cb870170..76e8ca44906a 100644 --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml @@ -75,7 +75,7 @@ additionalProperties: false examples: - | remoteproc@1c { - compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; + compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; reg = <0x1c 0x8>, <0x38 0x8>; reg-names = "remap", "cpu"; resets = <&media_cpu_reset>; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml index 478214ab045e..a59d91243ac8 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml @@ -304,7 +304,7 @@ examples: # Dual role switch with type-c - | usb@11201000 { - compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; + compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3"; reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>; reg-names = "mac", "ippc"; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml index d25fc708e32c..fec5651f5602 100644 --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml @@ -92,7 +92,7 @@ examples: usb@31100000 { compatible = "snps,dwc3"; - reg =<0x00 0x31100000 0x00 0x50000>; + reg = <0x00 0x31100000 0x00 0x50000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */ interrupt-names = "host", "peripheral";
The DTS code coding style expects spaces around '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Rob, Maybe this could go via your tree? Rebased on your for-next: v6.4-rc2-45-gf0ac35049606 --- .../bindings/arm/arm,coresight-cti.yaml | 18 +++++++++--------- .../bindings/arm/keystone/ti,sci.yaml | 8 ++++---- .../devicetree/bindings/display/msm/gmu.yaml | 2 +- .../display/panel/samsung,s6e8aa0.yaml | 2 +- .../display/rockchip/rockchip-vop.yaml | 4 ++-- .../bindings/iio/adc/ti,adc108s102.yaml | 2 +- .../bindings/media/renesas,rzg2l-cru.yaml | 4 ++-- .../devicetree/bindings/media/renesas,vin.yaml | 4 ++-- .../devicetree/bindings/mtd/mtd-physmap.yaml | 2 +- .../bindings/net/mediatek-dwmac.yaml | 2 +- .../bindings/perf/amlogic,g12-ddr-pmu.yaml | 4 ++-- .../bindings/phy/mediatek,dsi-phy.yaml | 2 +- .../remoteproc/amlogic,meson-mx-ao-arc.yaml | 2 +- .../devicetree/bindings/usb/mediatek,mtu3.yaml | 2 +- .../devicetree/bindings/usb/ti,am62-usb.yaml | 2 +- 15 files changed, 30 insertions(+), 30 deletions(-)