| Message ID | 20230613153415.350528-9-apatel@ventanamicro.com |
|---|---|
| State | New |
| Headers | show |
| Series | Linux RISC-V AIA Support | expand |
On Tue, Jun 13, 2023 at 8:35 AM Anup Patel <apatel@ventanamicro.com> wrote: > > The RISC-V advanced interrupt architecture (AIA) specification defines > a new interrupt controller for managing wired interrupts on a RISC-V > platform. This new interrupt controller is referred to as advanced > platform-level interrupt controller (APLIC) which can forward wired > interrupts to CPUs (or HARTs) as local interrupts OR as message > signaled interrupts. > (For more details refer https://github.com/riscv/riscv-aia) > > This patch adds an irqchip driver for RISC-V APLIC found on RISC-V > platforms. > > Signed-off-by: Anup Patel <apatel@ventanamicro.com> > --- > drivers/irqchip/Kconfig | 6 + > drivers/irqchip/Makefile | 1 + > drivers/irqchip/irq-riscv-aplic.c | 765 ++++++++++++++++++++++++++++ > include/linux/irqchip/riscv-aplic.h | 119 +++++ > 4 files changed, 891 insertions(+) > create mode 100644 drivers/irqchip/irq-riscv-aplic.c > create mode 100644 include/linux/irqchip/riscv-aplic.h > > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig > index d700980372ef..834c0329f583 100644 > --- a/drivers/irqchip/Kconfig > +++ b/drivers/irqchip/Kconfig > @@ -544,6 +544,12 @@ config SIFIVE_PLIC > select IRQ_DOMAIN_HIERARCHY > select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP > > +config RISCV_APLIC > + bool > + depends on RISCV > + select IRQ_DOMAIN_HIERARCHY > + select GENERIC_MSI_IRQ > + > config RISCV_IMSIC > bool > depends on RISCV > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile > index 577bde3e986b..438b8e1a152c 100644 > --- a/drivers/irqchip/Makefile > +++ b/drivers/irqchip/Makefile > @@ -95,6 +95,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o > obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o > obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o > obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o > +obj-$(CONFIG_RISCV_APLIC) += irq-riscv-aplic.o > obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o > obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o > obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o > diff --git a/drivers/irqchip/irq-riscv-aplic.c b/drivers/irqchip/irq-riscv-aplic.c > new file mode 100644 > index 000000000000..1e710fdf5608 > --- /dev/null > +++ b/drivers/irqchip/irq-riscv-aplic.c > @@ -0,0 +1,765 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2021 Western Digital Corporation or its affiliates. > + * Copyright (C) 2022 Ventana Micro Systems Inc. > + */ > + > +#define pr_fmt(fmt) "riscv-aplic: " fmt > +#include <linux/bitops.h> > +#include <linux/cpu.h> > +#include <linux/interrupt.h> > +#include <linux/io.h> > +#include <linux/irq.h> > +#include <linux/irqchip.h> > +#include <linux/irqchip/chained_irq.h> > +#include <linux/irqchip/riscv-aplic.h> > +#include <linux/irqchip/riscv-imsic.h> > +#include <linux/irqdomain.h> > +#include <linux/module.h> > +#include <linux/msi.h> > +#include <linux/platform_device.h> > +#include <linux/smp.h> > + > +#define APLIC_DEFAULT_PRIORITY 1 > +#define APLIC_DISABLE_IDELIVERY 0 > +#define APLIC_ENABLE_IDELIVERY 1 > +#define APLIC_DISABLE_ITHRESHOLD 1 > +#define APLIC_ENABLE_ITHRESHOLD 0 > + > +struct aplic_msicfg { > + phys_addr_t base_ppn; > + u32 hhxs; > + u32 hhxw; > + u32 lhxs; > + u32 lhxw; > +}; > + > +struct aplic_idc { > + unsigned int hart_index; > + void __iomem *regs; > + struct aplic_priv *priv; > +}; > + > +struct aplic_priv { > + struct fwnode_handle *fwnode; > + u32 gsi_base; > + u32 nr_irqs; > + u32 nr_idcs; > + void __iomem *regs; > + struct irq_domain *irqdomain; > + struct aplic_msicfg msicfg; > + struct cpumask lmask; > +}; > + > +static unsigned int aplic_idc_parent_irq; > +static DEFINE_PER_CPU(struct aplic_idc, aplic_idcs); > + > +static void aplic_irq_unmask(struct irq_data *d) > +{ > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > + > + writel(d->hwirq, priv->regs + APLIC_SETIENUM); > + > + if (!priv->nr_idcs) > + irq_chip_unmask_parent(d); > +} > + > +static void aplic_irq_mask(struct irq_data *d) > +{ > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > + > + writel(d->hwirq, priv->regs + APLIC_CLRIENUM); > + > + if (!priv->nr_idcs) > + irq_chip_mask_parent(d); > +} > + > +static int aplic_set_type(struct irq_data *d, unsigned int type) > +{ > + u32 val = 0; > + void __iomem *sourcecfg; > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > + > + switch (type) { > + case IRQ_TYPE_NONE: > + val = APLIC_SOURCECFG_SM_INACTIVE; > + break; > + case IRQ_TYPE_LEVEL_LOW: > + val = APLIC_SOURCECFG_SM_LEVEL_LOW; > + break; > + case IRQ_TYPE_LEVEL_HIGH: > + val = APLIC_SOURCECFG_SM_LEVEL_HIGH; > + break; > + case IRQ_TYPE_EDGE_FALLING: > + val = APLIC_SOURCECFG_SM_EDGE_FALL; > + break; > + case IRQ_TYPE_EDGE_RISING: > + val = APLIC_SOURCECFG_SM_EDGE_RISE; > + break; > + default: > + return -EINVAL; > + } > + > + sourcecfg = priv->regs + APLIC_SOURCECFG_BASE; > + sourcecfg += (d->hwirq - 1) * sizeof(u32); > + writel(val, sourcecfg); > + > + return 0; > +} > + > +static void aplic_irq_eoi(struct irq_data *d) > +{ > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > + u32 reg_off, reg_mask; > + > + /* > + * EOI handling only required only for level-triggered > + * interrupts in APLIC MSI mode. > + */ > + > + if (priv->nr_idcs) > + return; > + > + reg_off = APLIC_CLRIP_BASE + ((d->hwirq / APLIC_IRQBITS_PER_REG) * 4); > + reg_mask = BIT(d->hwirq % APLIC_IRQBITS_PER_REG); > + switch (irqd_get_trigger_type(d)) { > + case IRQ_TYPE_LEVEL_LOW: > + if (!(readl(priv->regs + reg_off) & reg_mask)) > + writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE); > + break; > + case IRQ_TYPE_LEVEL_HIGH: > + if (readl(priv->regs + reg_off) & reg_mask) > + writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE); > + break; > + } > +} > + > +#ifdef CONFIG_SMP > +static int aplic_set_affinity(struct irq_data *d, > + const struct cpumask *mask_val, bool force) > +{ > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > + struct aplic_idc *idc; > + unsigned int cpu, val; > + struct cpumask amask; > + void __iomem *target; > + > + if (!priv->nr_idcs) > + return irq_chip_set_affinity_parent(d, mask_val, force); > + > + cpumask_and(&amask, &priv->lmask, mask_val); > + > + if (force) > + cpu = cpumask_first(&amask); > + else > + cpu = cpumask_any_and(&amask, cpu_online_mask); > + > + if (cpu >= nr_cpu_ids) > + return -EINVAL; > + > + idc = per_cpu_ptr(&aplic_idcs, cpu); > + target = priv->regs + APLIC_TARGET_BASE; > + target += (d->hwirq - 1) * sizeof(u32); > + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; > + val <<= APLIC_TARGET_HART_IDX_SHIFT; > + val |= APLIC_DEFAULT_PRIORITY; > + writel(val, target); > + > + irq_data_update_effective_affinity(d, cpumask_of(cpu)); > + > + return IRQ_SET_MASK_OK_DONE; > +} > +#endif > + > +static struct irq_chip aplic_chip = { > + .name = "RISC-V APLIC", > + .irq_mask = aplic_irq_mask, > + .irq_unmask = aplic_irq_unmask, > + .irq_set_type = aplic_set_type, > + .irq_eoi = aplic_irq_eoi, > +#ifdef CONFIG_SMP > + .irq_set_affinity = aplic_set_affinity, > +#endif > + .flags = IRQCHIP_SET_TYPE_MASKED | > + IRQCHIP_SKIP_SET_WAKE | > + IRQCHIP_MASK_ON_SUSPEND, > +}; > + > +static int aplic_irqdomain_translate(struct irq_fwspec *fwspec, > + u32 gsi_base, > + unsigned long *hwirq, > + unsigned int *type) > +{ > + if (WARN_ON(fwspec->param_count < 2)) > + return -EINVAL; > + if (WARN_ON(!fwspec->param[0])) > + return -EINVAL; > + > + /* For DT, gsi_base is always zero. */ > + *hwirq = fwspec->param[0] - gsi_base; > + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; > + > + WARN_ON(*type == IRQ_TYPE_NONE); > + > + return 0; > +} > + > +static int aplic_irqdomain_msi_translate(struct irq_domain *d, > + struct irq_fwspec *fwspec, > + unsigned long *hwirq, > + unsigned int *type) > +{ > + struct aplic_priv *priv = platform_msi_get_host_data(d); > + > + return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type); > +} > + > +static int aplic_irqdomain_msi_alloc(struct irq_domain *domain, > + unsigned int virq, unsigned int nr_irqs, > + void *arg) > +{ > + int i, ret; > + unsigned int type; > + irq_hw_number_t hwirq; > + struct irq_fwspec *fwspec = arg; > + struct aplic_priv *priv = platform_msi_get_host_data(domain); > + > + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type); > + if (ret) > + return ret; > + > + ret = platform_msi_device_domain_alloc(domain, virq, nr_irqs); > + if (ret) > + return ret; > + > + for (i = 0; i < nr_irqs; i++) { > + irq_domain_set_info(domain, virq + i, hwirq + i, > + &aplic_chip, priv, handle_fasteoi_irq, > + NULL, NULL); > + /* > + * APLIC does not implement irq_disable() so Linux interrupt > + * subsystem will take a lazy approach for disabling an APLIC > + * interrupt. This means APLIC interrupts are left unmasked > + * upon system suspend and interrupts are not processed > + * immediately upon system wake up. To tackle this, we disable > + * the lazy approach for all APLIC interrupts. > + */ > + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY); > + } > + > + return 0; > +} > + > +static const struct irq_domain_ops aplic_irqdomain_msi_ops = { > + .translate = aplic_irqdomain_msi_translate, > + .alloc = aplic_irqdomain_msi_alloc, > + .free = platform_msi_device_domain_free, > +}; > + > +static int aplic_irqdomain_idc_translate(struct irq_domain *d, > + struct irq_fwspec *fwspec, > + unsigned long *hwirq, > + unsigned int *type) > +{ > + struct aplic_priv *priv = d->host_data; > + > + return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type); > +} > + > +static int aplic_irqdomain_idc_alloc(struct irq_domain *domain, > + unsigned int virq, unsigned int nr_irqs, > + void *arg) > +{ > + int i, ret; > + unsigned int type; > + irq_hw_number_t hwirq; > + struct irq_fwspec *fwspec = arg; > + struct aplic_priv *priv = domain->host_data; > + > + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type); > + if (ret) > + return ret; > + > + for (i = 0; i < nr_irqs; i++) { > + irq_domain_set_info(domain, virq + i, hwirq + i, > + &aplic_chip, priv, handle_fasteoi_irq, > + NULL, NULL); > + irq_set_affinity(virq + i, &priv->lmask); > + /* See the reason described in aplic_irqdomain_msi_alloc() */ > + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY); > + } > + > + return 0; > +} > + > +static const struct irq_domain_ops aplic_irqdomain_idc_ops = { > + .translate = aplic_irqdomain_idc_translate, > + .alloc = aplic_irqdomain_idc_alloc, > + .free = irq_domain_free_irqs_top, > +}; > + > +static void aplic_init_hw_irqs(struct aplic_priv *priv) > +{ > + int i; > + > + /* Disable all interrupts */ > + for (i = 0; i <= priv->nr_irqs; i += 32) > + writel(-1U, priv->regs + APLIC_CLRIE_BASE + > + (i / 32) * sizeof(u32)); > + > + /* Set interrupt type and default priority for all interrupts */ > + for (i = 1; i <= priv->nr_irqs; i++) { > + writel(0, priv->regs + APLIC_SOURCECFG_BASE + > + (i - 1) * sizeof(u32)); > + writel(APLIC_DEFAULT_PRIORITY, > + priv->regs + APLIC_TARGET_BASE + > + (i - 1) * sizeof(u32)); > + } > + > + /* Clear APLIC domaincfg */ > + writel(0, priv->regs + APLIC_DOMAINCFG); > +} > + > +static void aplic_init_hw_global(struct aplic_priv *priv) > +{ > + u32 val; > +#ifdef CONFIG_RISCV_M_MODE > + u32 valH; > + > + if (!priv->nr_idcs) { > + val = priv->msicfg.base_ppn; > + valH = (priv->msicfg.base_ppn >> 32) & > + APLIC_xMSICFGADDRH_BAPPN_MASK; > + valH |= (priv->msicfg.lhxw & APLIC_xMSICFGADDRH_LHXW_MASK) > + << APLIC_xMSICFGADDRH_LHXW_SHIFT; > + valH |= (priv->msicfg.hhxw & APLIC_xMSICFGADDRH_HHXW_MASK) > + << APLIC_xMSICFGADDRH_HHXW_SHIFT; > + valH |= (priv->msicfg.lhxs & APLIC_xMSICFGADDRH_LHXS_MASK) > + << APLIC_xMSICFGADDRH_LHXS_SHIFT; > + valH |= (priv->msicfg.hhxs & APLIC_xMSICFGADDRH_HHXS_MASK) > + << APLIC_xMSICFGADDRH_HHXS_SHIFT; > + writel(val, priv->regs + APLIC_xMSICFGADDR); > + writel(valH, priv->regs + APLIC_xMSICFGADDRH); > + } > +#endif > + > + /* Setup APLIC domaincfg register */ > + val = readl(priv->regs + APLIC_DOMAINCFG); > + val |= APLIC_DOMAINCFG_IE; > + if (!priv->nr_idcs) > + val |= APLIC_DOMAINCFG_DM; > + writel(val, priv->regs + APLIC_DOMAINCFG); > + if (readl(priv->regs + APLIC_DOMAINCFG) != val) > + pr_warn("%pfwP: unable to write 0x%x in domaincfg\n", > + priv->fwnode, val); > +} > + > +static void aplic_msi_write_msg(struct msi_desc *desc, struct msi_msg *msg) > +{ > + unsigned int group_index, hart_index, guest_index, val; > + struct irq_data *d = irq_get_irq_data(desc->irq); > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > + struct aplic_msicfg *mc = &priv->msicfg; > + phys_addr_t tppn, tbppn, msg_addr; > + void __iomem *target; > + > + /* For zeroed MSI, simply write zero into the target register */ > + if (!msg->address_hi && !msg->address_lo && !msg->data) { > + target = priv->regs + APLIC_TARGET_BASE; > + target += (d->hwirq - 1) * sizeof(u32); > + writel(0, target); > + return; > + } > + > + /* Sanity check on message data */ > + WARN_ON(msg->data > APLIC_TARGET_EIID_MASK); > + > + /* Compute target MSI address */ > + msg_addr = (((u64)msg->address_hi) << 32) | msg->address_lo; > + tppn = msg_addr >> APLIC_xMSICFGADDR_PPN_SHIFT; > + > + /* Compute target HART Base PPN */ > + tbppn = tppn; > + tbppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); > + tbppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs); > + tbppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs); > + WARN_ON(tbppn != mc->base_ppn); > + > + /* Compute target group and hart indexes */ > + group_index = (tppn >> APLIC_xMSICFGADDR_PPN_HHX_SHIFT(mc->hhxs)) & > + APLIC_xMSICFGADDR_PPN_HHX_MASK(mc->hhxw); > + hart_index = (tppn >> APLIC_xMSICFGADDR_PPN_LHX_SHIFT(mc->lhxs)) & > + APLIC_xMSICFGADDR_PPN_LHX_MASK(mc->lhxw); > + hart_index |= (group_index << mc->lhxw); > + WARN_ON(hart_index > APLIC_TARGET_HART_IDX_MASK); > + > + /* Compute target guest index */ > + guest_index = tppn & APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); > + WARN_ON(guest_index > APLIC_TARGET_GUEST_IDX_MASK); > + > + /* Update IRQ TARGET register */ > + target = priv->regs + APLIC_TARGET_BASE; > + target += (d->hwirq - 1) * sizeof(u32); > + val = (hart_index & APLIC_TARGET_HART_IDX_MASK) > + << APLIC_TARGET_HART_IDX_SHIFT; > + val |= (guest_index & APLIC_TARGET_GUEST_IDX_MASK) > + << APLIC_TARGET_GUEST_IDX_SHIFT; > + val |= (msg->data & APLIC_TARGET_EIID_MASK); > + writel(val, target); > +} > + > +static int aplic_setup_msi(struct aplic_priv *priv) > +{ > + struct aplic_msicfg *mc = &priv->msicfg; > + const struct imsic_global_config *imsic_global; > + > + /* > + * The APLIC outgoing MSI config registers assume target MSI > + * controller to be RISC-V AIA IMSIC controller. > + */ > + imsic_global = imsic_get_global_config(); > + if (!imsic_global) { > + pr_err("%pfwP: IMSIC global config not found\n", > + priv->fwnode); > + return -ENODEV; > + } > + > + /* Find number of guest index bits (LHXS) */ > + mc->lhxs = imsic_global->guest_index_bits; > + if (APLIC_xMSICFGADDRH_LHXS_MASK < mc->lhxs) { > + pr_err("%pfwP: IMSIC guest index bits big for APLIC LHXS\n", > + priv->fwnode); > + return -EINVAL; > + } > + > + /* Find number of HART index bits (LHXW) */ > + mc->lhxw = imsic_global->hart_index_bits; > + if (APLIC_xMSICFGADDRH_LHXW_MASK < mc->lhxw) { > + pr_err("%pfwP: IMSIC hart index bits big for APLIC LHXW\n", > + priv->fwnode); > + return -EINVAL; > + } > + > + /* Find number of group index bits (HHXW) */ > + mc->hhxw = imsic_global->group_index_bits; > + if (APLIC_xMSICFGADDRH_HHXW_MASK < mc->hhxw) { > + pr_err("%pfwP: IMSIC group index bits big for APLIC HHXW\n", > + priv->fwnode); > + return -EINVAL; > + } > + > + /* Find first bit position of group index (HHXS) */ > + mc->hhxs = imsic_global->group_index_shift; > + if (mc->hhxs < (2 * APLIC_xMSICFGADDR_PPN_SHIFT)) { > + pr_err("%pfwP: IMSIC group index shift should be >= %d\n", > + priv->fwnode, (2 * APLIC_xMSICFGADDR_PPN_SHIFT)); > + return -EINVAL; > + } > + mc->hhxs -= (2 * APLIC_xMSICFGADDR_PPN_SHIFT); > + if (APLIC_xMSICFGADDRH_HHXS_MASK < mc->hhxs) { > + pr_err("%pfwP: IMSIC group index shift big for APLIC HHXS\n", > + priv->fwnode); > + return -EINVAL; > + } > + > + /* Compute PPN base */ > + mc->base_ppn = imsic_global->base_addr >> APLIC_xMSICFGADDR_PPN_SHIFT; > + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); > + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs); > + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs); > + > + /* Use all possible CPUs as lmask */ > + cpumask_copy(&priv->lmask, cpu_possible_mask); > + > + return 0; > +} > + > +/* > + * To handle an APLIC IDC interrupts, we just read the CLAIMI register > + * which will return highest priority pending interrupt and clear the > + * pending bit of the interrupt. This process is repeated until CLAIMI > + * register return zero value. > + */ > +static void aplic_idc_handle_irq(struct irq_desc *desc) > +{ > + struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs); > + struct irq_chip *chip = irq_desc_get_chip(desc); > + irq_hw_number_t hw_irq; > + int irq; > + > + chained_irq_enter(chip, desc); > + > + while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) { > + hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT; > + irq = irq_find_mapping(idc->priv->irqdomain, hw_irq); > + > + if (unlikely(irq <= 0)) > + pr_warn_ratelimited("hw_irq %lu mapping not found\n", > + hw_irq); > + else > + generic_handle_irq(irq); > + } > + > + chained_irq_exit(chip, desc); > +} > + > +static void aplic_idc_set_delivery(struct aplic_idc *idc, bool en) > +{ > + u32 de = (en) ? APLIC_ENABLE_IDELIVERY : APLIC_DISABLE_IDELIVERY; > + u32 th = (en) ? APLIC_ENABLE_ITHRESHOLD : APLIC_DISABLE_ITHRESHOLD; > + > + /* Priority must be less than threshold for interrupt triggering */ > + writel(th, idc->regs + APLIC_IDC_ITHRESHOLD); > + > + /* Delivery must be set to 1 for interrupt triggering */ > + writel(de, idc->regs + APLIC_IDC_IDELIVERY); > +} > + > +static int aplic_idc_dying_cpu(unsigned int cpu) > +{ > + if (aplic_idc_parent_irq) > + disable_percpu_irq(aplic_idc_parent_irq); > + > + return 0; > +} > + > +static int aplic_idc_starting_cpu(unsigned int cpu) > +{ > + if (aplic_idc_parent_irq) > + enable_percpu_irq(aplic_idc_parent_irq, > + irq_get_trigger_type(aplic_idc_parent_irq)); > + > + return 0; > +} > + > +static int aplic_setup_idc(struct aplic_priv *priv) > +{ > + int i, j, rc, cpu, setup_count = 0; > + struct fwnode_reference_args parent; > + struct irq_domain *domain; > + unsigned long hartid; > + struct aplic_idc *idc; > + u32 val; > + > + /* Setup per-CPU IDC and target CPU mask */ > + for (i = 0; i < priv->nr_idcs; i++) { > + rc = fwnode_property_get_reference_args(priv->fwnode, > + "interrupts-extended", "#interrupt-cells", > + 0, i, &parent); > + if (rc) { > + pr_warn("%pfwP: parent irq for IDC%d not found\n", > + priv->fwnode, i); > + continue; > + } > + > + /* > + * Skip interrupts other than external interrupts for > + * current privilege level. > + */ > + if (parent.args[0] != RV_IRQ_EXT) > + continue; > + > + rc = riscv_fw_parent_hartid(parent.fwnode, &hartid); > + if (rc) { > + pr_warn("%pfwP: invalid hartid for IDC%d\n", > + priv->fwnode, i); > + continue; > + } > + > + cpu = riscv_hartid_to_cpuid(hartid); > + if (cpu < 0) { > + pr_warn("%pfwP: invalid cpuid for IDC%d\n", > + priv->fwnode, i); > + continue; > + } > + > + cpumask_set_cpu(cpu, &priv->lmask); > + > + idc = per_cpu_ptr(&aplic_idcs, cpu); > + idc->hart_index = i; > + idc->regs = priv->regs + APLIC_IDC_BASE + i * APLIC_IDC_SIZE; > + idc->priv = priv; > + > + aplic_idc_set_delivery(idc, true); > + > + /* > + * Boot cpu might not have APLIC hart_index = 0 so check > + * and update target registers of all interrupts. > + */ > + if (cpu == smp_processor_id() && idc->hart_index) { > + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; > + val <<= APLIC_TARGET_HART_IDX_SHIFT; > + val |= APLIC_DEFAULT_PRIORITY; > + for (j = 1; j <= priv->nr_irqs; j++) > + writel(val, priv->regs + APLIC_TARGET_BASE + > + (j - 1) * sizeof(u32)); > + } > + > + setup_count++; > + } > + > + /* Find parent domain and register chained handler */ > + domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), > + DOMAIN_BUS_ANY); > + if (!aplic_idc_parent_irq && domain) { > + aplic_idc_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT); > + if (aplic_idc_parent_irq) { > + irq_set_chained_handler(aplic_idc_parent_irq, > + aplic_idc_handle_irq); > + > + /* > + * Setup CPUHP notifier to enable IDC parent > + * interrupt on all CPUs > + */ > + cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, > + "irqchip/riscv/aplic:starting", > + aplic_idc_starting_cpu, > + aplic_idc_dying_cpu); > + } > + } > + > + /* Fail if we were not able to setup IDC for any CPU */ > + return (setup_count) ? 0 : -ENODEV; > +} > + > +static int aplic_probe(struct platform_device *pdev) > +{ > + struct fwnode_handle *fwnode = pdev->dev.fwnode; > + struct fwnode_reference_args parent; > + struct aplic_priv *priv; > + struct resource *res; > + phys_addr_t pa; > + int rc; > + > + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + priv->fwnode = fwnode; > + > + /* Map the MMIO registers */ > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) { > + pr_err("%pfwP: failed to get MMIO resource\n", fwnode); > + return -EINVAL; > + } > + priv->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); > + if (!priv->regs) { > + pr_err("%pfwP: failed map MMIO registers\n", fwnode); > + return -ENOMEM; > + } > + > + /* > + * Find out GSI base number > + * > + * Note: DT does not define "riscv,gsi-base" property so GSI > + * base is always zero for DT. > + */ > + rc = fwnode_property_read_u32_array(fwnode, "riscv,gsi-base", > + &priv->gsi_base, 1); > + if (rc) > + priv->gsi_base = 0; > + > + /* Find out number of interrupt sources */ > + rc = fwnode_property_read_u32_array(fwnode, "riscv,num-sources", > + &priv->nr_irqs, 1); > + if (rc) { > + pr_err("%pfwP: failed to get number of interrupt sources\n", > + fwnode); > + return rc; > + } > + > + /* Setup initial state APLIC interrupts */ > + aplic_init_hw_irqs(priv); > + > + /* > + * Find out number of IDCs based on parent interrupts > + * > + * If "msi-parent" property is present then we ignore the > + * APLIC IDCs which forces the APLIC driver to use MSI mode. > + */ > + if (!fwnode_property_present(fwnode, "msi-parent")) { > + while (!fwnode_property_get_reference_args(fwnode, > + "interrupts-extended", "#interrupt-cells", > + 0, priv->nr_idcs, &parent)) > + priv->nr_idcs++; > + } > + > + /* Setup IDCs or MSIs based on number of IDCs */ > + if (priv->nr_idcs) > + rc = aplic_setup_idc(priv); > + else > + rc = aplic_setup_msi(priv); > + if (rc) { > + pr_err("%pfwP: failed setup %s\n", > + fwnode, priv->nr_idcs ? "IDCs" : "MSIs"); > + return rc; > + } > + > + /* Setup global config and interrupt delivery */ > + aplic_init_hw_global(priv); > + > + /* Create irq domain instance for the APLIC */ > + if (priv->nr_idcs) > + priv->irqdomain = irq_domain_create_linear( > + priv->fwnode, > + priv->nr_irqs + 1, > + &aplic_irqdomain_idc_ops, > + priv); > + else > + priv->irqdomain = platform_msi_create_device_domain( > + &pdev->dev, > + priv->nr_irqs + 1, > + aplic_msi_write_msg, > + &aplic_irqdomain_msi_ops, > + priv); > + if (!priv->irqdomain) { > + pr_err("%pfwP: failed to add irq domain\n", priv->fwnode); > + return -ENOMEM; > + } > + > + /* Advertise the interrupt controller */ > + if (priv->nr_idcs) { > + pr_info("%pfwP: %d interrupts directly connected to %d CPUs\n", > + priv->fwnode, priv->nr_irqs, priv->nr_idcs); > + } else { > + pa = priv->msicfg.base_ppn << APLIC_xMSICFGADDR_PPN_SHIFT; > + pr_info("%pfwP: %d interrupts forwared to MSI base %pa\n", > + priv->fwnode, priv->nr_irqs, &pa); > + } > + > + return 0; > +} > + > +static const struct of_device_id aplic_match[] = { > + { .compatible = "riscv,aplic" }, > + {} > +}; > + > +static struct platform_driver aplic_driver = { > + .driver = { > + .name = "riscv-aplic", > + .of_match_table = aplic_match, > + }, > + .probe = aplic_probe, > +}; > +builtin_platform_driver(aplic_driver); > + > +static int __init aplic_dt_init(struct device_node *node, > + struct device_node *parent) > +{ > + /* > + * The APLIC platform driver needs to be probed early > + * so for device tree: > + * > + * 1) Set the FWNODE_FLAG_BEST_EFFORT flag in fwnode which > + * provides a hint to the device driver core to probe the > + * platform driver early. > + * 2) Clear the OF_POPULATED flag in device_node because > + * of_irq_init() sets it which prevents creation of > + * platform device. > + */ > + node->fwnode.flags |= FWNODE_FLAG_BEST_EFFORT; NACK. You are blindly plastering flags without trying to understand the real issue and fixing this correctly. > + of_node_clear_flag(node, OF_POPULATED); > + return 0; > +} > +IRQCHIP_DECLARE(riscv_aplic, "riscv,aplic", aplic_dt_init); This macro pretty much skips the entire driver core framework to probe and calls init and you are supposed to initialize the device when the init function is called. If you want your device/driver to follow the proper platform driver path (which is recommended), then you need to use the IRQCHIP_PLATFORM_DRIVER_BEGIN() and related macros. Grep for plenty of examples. I offered to help you debug this issue and I asked for a dts file that corresponds to a board you are testing this on and seeing an issue. But you haven't answered my question [1] and are pointing to some random commit and blaming it. That commit has no impact on any existing devices/drivers. Hi Marc, Please consider this patch Nacked as long as FWNODE_FLAG_BEST_EFFORT is used or until Anup actually works with us to debug the real issue. -Saravana [1] - https://lore.kernel.org/lkml/CAAhSdy2p6K70fc2yZLPdVGqEq61Y8F7WVT2J8st5mQrzBi4WHg@mail.gmail.com/ > diff --git a/include/linux/irqchip/riscv-aplic.h b/include/linux/irqchip/riscv-aplic.h > new file mode 100644 > index 000000000000..97e198ea0109 > --- /dev/null > +++ b/include/linux/irqchip/riscv-aplic.h > @@ -0,0 +1,119 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (C) 2021 Western Digital Corporation or its affiliates. > + * Copyright (C) 2022 Ventana Micro Systems Inc. > + */ > +#ifndef __LINUX_IRQCHIP_RISCV_APLIC_H > +#define __LINUX_IRQCHIP_RISCV_APLIC_H > + > +#include <linux/bitops.h> > + > +#define APLIC_MAX_IDC BIT(14) > +#define APLIC_MAX_SOURCE 1024 > + > +#define APLIC_DOMAINCFG 0x0000 > +#define APLIC_DOMAINCFG_RDONLY 0x80000000 > +#define APLIC_DOMAINCFG_IE BIT(8) > +#define APLIC_DOMAINCFG_DM BIT(2) > +#define APLIC_DOMAINCFG_BE BIT(0) > + > +#define APLIC_SOURCECFG_BASE 0x0004 > +#define APLIC_SOURCECFG_D BIT(10) > +#define APLIC_SOURCECFG_CHILDIDX_MASK 0x000003ff > +#define APLIC_SOURCECFG_SM_MASK 0x00000007 > +#define APLIC_SOURCECFG_SM_INACTIVE 0x0 > +#define APLIC_SOURCECFG_SM_DETACH 0x1 > +#define APLIC_SOURCECFG_SM_EDGE_RISE 0x4 > +#define APLIC_SOURCECFG_SM_EDGE_FALL 0x5 > +#define APLIC_SOURCECFG_SM_LEVEL_HIGH 0x6 > +#define APLIC_SOURCECFG_SM_LEVEL_LOW 0x7 > + > +#define APLIC_MMSICFGADDR 0x1bc0 > +#define APLIC_MMSICFGADDRH 0x1bc4 > +#define APLIC_SMSICFGADDR 0x1bc8 > +#define APLIC_SMSICFGADDRH 0x1bcc > + > +#ifdef CONFIG_RISCV_M_MODE > +#define APLIC_xMSICFGADDR APLIC_MMSICFGADDR > +#define APLIC_xMSICFGADDRH APLIC_MMSICFGADDRH > +#else > +#define APLIC_xMSICFGADDR APLIC_SMSICFGADDR > +#define APLIC_xMSICFGADDRH APLIC_SMSICFGADDRH > +#endif > + > +#define APLIC_xMSICFGADDRH_L BIT(31) > +#define APLIC_xMSICFGADDRH_HHXS_MASK 0x1f > +#define APLIC_xMSICFGADDRH_HHXS_SHIFT 24 > +#define APLIC_xMSICFGADDRH_LHXS_MASK 0x7 > +#define APLIC_xMSICFGADDRH_LHXS_SHIFT 20 > +#define APLIC_xMSICFGADDRH_HHXW_MASK 0x7 > +#define APLIC_xMSICFGADDRH_HHXW_SHIFT 16 > +#define APLIC_xMSICFGADDRH_LHXW_MASK 0xf > +#define APLIC_xMSICFGADDRH_LHXW_SHIFT 12 > +#define APLIC_xMSICFGADDRH_BAPPN_MASK 0xfff > + > +#define APLIC_xMSICFGADDR_PPN_SHIFT 12 > + > +#define APLIC_xMSICFGADDR_PPN_HART(__lhxs) \ > + (BIT(__lhxs) - 1) > + > +#define APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) \ > + (BIT(__lhxw) - 1) > +#define APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs) \ > + ((__lhxs)) > +#define APLIC_xMSICFGADDR_PPN_LHX(__lhxw, __lhxs) \ > + (APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) << \ > + APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs)) > + > +#define APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) \ > + (BIT(__hhxw) - 1) > +#define APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs) \ > + ((__hhxs) + APLIC_xMSICFGADDR_PPN_SHIFT) > +#define APLIC_xMSICFGADDR_PPN_HHX(__hhxw, __hhxs) \ > + (APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) << \ > + APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs)) > + > +#define APLIC_IRQBITS_PER_REG 32 > + > +#define APLIC_SETIP_BASE 0x1c00 > +#define APLIC_SETIPNUM 0x1cdc > + > +#define APLIC_CLRIP_BASE 0x1d00 > +#define APLIC_CLRIPNUM 0x1ddc > + > +#define APLIC_SETIE_BASE 0x1e00 > +#define APLIC_SETIENUM 0x1edc > + > +#define APLIC_CLRIE_BASE 0x1f00 > +#define APLIC_CLRIENUM 0x1fdc > + > +#define APLIC_SETIPNUM_LE 0x2000 > +#define APLIC_SETIPNUM_BE 0x2004 > + > +#define APLIC_GENMSI 0x3000 > + > +#define APLIC_TARGET_BASE 0x3004 > +#define APLIC_TARGET_HART_IDX_SHIFT 18 > +#define APLIC_TARGET_HART_IDX_MASK 0x3fff > +#define APLIC_TARGET_GUEST_IDX_SHIFT 12 > +#define APLIC_TARGET_GUEST_IDX_MASK 0x3f > +#define APLIC_TARGET_IPRIO_MASK 0xff > +#define APLIC_TARGET_EIID_MASK 0x7ff > + > +#define APLIC_IDC_BASE 0x4000 > +#define APLIC_IDC_SIZE 32 > + > +#define APLIC_IDC_IDELIVERY 0x00 > + > +#define APLIC_IDC_IFORCE 0x04 > + > +#define APLIC_IDC_ITHRESHOLD 0x08 > + > +#define APLIC_IDC_TOPI 0x18 > +#define APLIC_IDC_TOPI_ID_SHIFT 16 > +#define APLIC_IDC_TOPI_ID_MASK 0x3ff > +#define APLIC_IDC_TOPI_PRIO_MASK 0xff > + > +#define APLIC_IDC_CLAIMI 0x1c > + > +#endif > -- > 2.34.1 >
On Thu, Jun 15, 2023 at 12:31 PM Conor Dooley <conor@kernel.org> wrote: > > Hey Saravana, > > On Thu, Jun 15, 2023 at 12:17:08PM -0700, Saravana Kannan wrote: > > On Tue, Jun 13, 2023 at 8:35 AM Anup Patel <apatel@ventanamicro.com> wrote: > > btw, please try to delete the 100s of lines of unrelated context when > replying I always feel like some people like me to do this and others don't. Also, at times, people might want to reference the other lines of code when replying to my point. That's why I generally leave them in. > > > > +static int __init aplic_dt_init(struct device_node *node, > > > + struct device_node *parent) > > > +{ > > > + /* > > > + * The APLIC platform driver needs to be probed early > > > + * so for device tree: > > > + * > > > + * 1) Set the FWNODE_FLAG_BEST_EFFORT flag in fwnode which > > > + * provides a hint to the device driver core to probe the > > > + * platform driver early. > > > + * 2) Clear the OF_POPULATED flag in device_node because > > > + * of_irq_init() sets it which prevents creation of > > > + * platform device. > > > + */ > > > + node->fwnode.flags |= FWNODE_FLAG_BEST_EFFORT; > > > > NACK. You are blindly plastering flags without trying to understand > > the real issue and fixing this correctly. > > > > > + of_node_clear_flag(node, OF_POPULATED); Also, this part is not needed if the macros I mentioned below are used. > > > + return 0; > > > +} > > > +IRQCHIP_DECLARE(riscv_aplic, "riscv,aplic", aplic_dt_init); > > > > This macro pretty much skips the entire driver core framework to probe > > and calls init and you are supposed to initialize the device when the > > init function is called. > > > > If you want your device/driver to follow the proper platform driver > > path (which is recommended), then you need to use the > > IRQCHIP_PLATFORM_DRIVER_BEGIN() and related macros. Grep for plenty of examples. > > > > I offered to help you debug this issue and I asked for a dts file that > > corresponds to a board you are testing this on and seeing an issue. > > There isn't a dts file for this because there's no publicly available > hardware that actually has an APLIC. Maybe Ventana have pre-production > silicon that has it, but otherwise it's a QEMU job. 1. QEMU example is fine too if it can be reproduced. I just asked for a dts file because I need the full global view of the dependencies. At a minimum, I'd at least expect to see some example DT and explanation of what dependency is causing the IRQ device to not be initialized on time, etc. Instead I just see random uses of flags with no description of the actual issue. 2. If it's not a dts available upstream, why should these drivers be accepted? I thought the norm was to only accept drivers that can actually be used. -Saravana > > Cheers, > Conor. > > > But you haven't answered my question [1] and are pointing to some > > random commit and blaming it. That commit has no impact on any > > existing devices/drivers. > > > > Hi Marc, > > > > Please consider this patch Nacked as long as FWNODE_FLAG_BEST_EFFORT > > is used or until Anup actually works with us to debug the real issue. > > > > -Saravana > > [1] - https://lore.kernel.org/lkml/CAAhSdy2p6K70fc2yZLPdVGqEq61Y8F7WVT2J8st5mQrzBi4WHg@mail.gmail.com/
On Thu, Jun 15, 2023 at 01:45:55PM -0700, Saravana Kannan wrote: > On Thu, Jun 15, 2023 at 12:31 PM Conor Dooley <conor@kernel.org> wrote: > > On Thu, Jun 15, 2023 at 12:17:08PM -0700, Saravana Kannan wrote: > > > On Tue, Jun 13, 2023 at 8:35 AM Anup Patel <apatel@ventanamicro.com> wrote: > > > > btw, please try to delete the 100s of lines of unrelated context when > > replying > > I always feel like some people like me to do this and others don't. > Also, at times, people might want to reference the other lines of code > when replying to my point. That's why I generally leave them in. Yah, perhaps I cull too aggressively but there's a middle ground ;) > > > > +static int __init aplic_dt_init(struct device_node *node, > > > > + struct device_node *parent) > > > > +{ > > > > + /* > > > > + * The APLIC platform driver needs to be probed early > > > > + * so for device tree: > > > > + * > > > > + * 1) Set the FWNODE_FLAG_BEST_EFFORT flag in fwnode which > > > > + * provides a hint to the device driver core to probe the > > > > + * platform driver early. > > > > + * 2) Clear the OF_POPULATED flag in device_node because > > > > + * of_irq_init() sets it which prevents creation of > > > > + * platform device. > > > > + */ > > > > + node->fwnode.flags |= FWNODE_FLAG_BEST_EFFORT; > > > > > > NACK. You are blindly plastering flags without trying to understand > > > the real issue and fixing this correctly. > > > > > > > + of_node_clear_flag(node, OF_POPULATED); > > Also, this part is not needed if the macros I mentioned below are used. > > > > > + return 0; > > > > +} > > > > +IRQCHIP_DECLARE(riscv_aplic, "riscv,aplic", aplic_dt_init); > > > > > > This macro pretty much skips the entire driver core framework to probe > > > and calls init and you are supposed to initialize the device when the > > > init function is called. > > > > > > If you want your device/driver to follow the proper platform driver > > > path (which is recommended), then you need to use the > > > IRQCHIP_PLATFORM_DRIVER_BEGIN() and related macros. Grep for plenty of examples. > > > > > > I offered to help you debug this issue and I asked for a dts file that > > > corresponds to a board you are testing this on and seeing an issue. > > > > There isn't a dts file for this because there's no publicly available > > hardware that actually has an APLIC. Maybe Ventana have pre-production > > silicon that has it, but otherwise it's a QEMU job. > > 1. QEMU example is fine too if it can be reproduced. I just asked for > a dts file because I need the full global view of the dependencies. At > a minimum, I'd at least expect to see some example DT and explanation > of what dependency is causing the IRQ device to not be initialized on > time, etc. Instead I just see random uses of flags with no description > of the actual issue. It's Anup's responsibility to provide you with that information, I have not reproduced this issue, so I won't mislead you with QEMU invocations that may not be what's required to reproduce. > 2. If it's not a dts available upstream, why should these drivers be > accepted? I thought the norm was to only accept drivers that can > actually be used. I think it's not unusual (and desirable?) to start the upstreaming process for stuff before hardware is publicly available, so that once it is, support is already upstream, or close to. I do know that people have tested this series in FPGA based hardware emulation platforms etc. Posting patches for it also helps avoid duplication of effort between the various vendors in RISC-V land, who would otherwise have to write their own drivers. Also, the documented RISC-V policy for accepting support for ISA stuff says: We'll only accept patches for new modules or extensions if the specifications for those modules or extensions are listed as being unlikely to be incompatibly changed in the future. For specifications from the RISC-V foundation this means "Frozen" (Documentation/riscv/patch-acceptance.rst) AIA (the spec behind the APLIC/IMSIC) is frozen, and qualifies from a RISC-V point of view. What Marc is willing to accept, in terms of pre-production hardware support, is up to him obviously! Cheers, Conor. > > > But you haven't answered my question [1] and are pointing to some > > > random commit and blaming it. That commit has no impact on any > > > existing devices/drivers. > > > > > > Hi Marc, > > > > > > Please consider this patch Nacked as long as FWNODE_FLAG_BEST_EFFORT > > > is used or until Anup actually works with us to debug the real issue. > > > > > > -Saravana > > > [1] - https://lore.kernel.org/lkml/CAAhSdy2p6K70fc2yZLPdVGqEq61Y8F7WVT2J8st5mQrzBi4WHg@mail.gmail.com/
On Sun, Jun 18, 2023 at 11:13 PM Anup Patel <apatel@ventanamicro.com> wrote: > > On Sat, Jun 17, 2023 at 3:36 AM Saravana Kannan <saravanak@google.com> wrote: > > > > On Thu, Jun 15, 2023 at 7:01 PM Anup Patel <anup@brainfault.org> wrote: > > > > > > On Fri, Jun 16, 2023 at 12:47 AM Saravana Kannan <saravanak@google.com> wrote: > > > > > > > > On Tue, Jun 13, 2023 at 8:35 AM Anup Patel <apatel@ventanamicro.com> wrote: > > > > > > > > > > The RISC-V advanced interrupt architecture (AIA) specification defines > > > > > a new interrupt controller for managing wired interrupts on a RISC-V > > > > > platform. This new interrupt controller is referred to as advanced > > > > > platform-level interrupt controller (APLIC) which can forward wired > > > > > interrupts to CPUs (or HARTs) as local interrupts OR as message > > > > > signaled interrupts. > > > > > (For more details refer https://github.com/riscv/riscv-aia) > > > > > > > > > > This patch adds an irqchip driver for RISC-V APLIC found on RISC-V > > > > > platforms. > > > > > > > > > > Signed-off-by: Anup Patel <apatel@ventanamicro.com> > > > > > --- > > > > > drivers/irqchip/Kconfig | 6 + > > > > > drivers/irqchip/Makefile | 1 + > > > > > drivers/irqchip/irq-riscv-aplic.c | 765 ++++++++++++++++++++++++++++ > > > > > include/linux/irqchip/riscv-aplic.h | 119 +++++ > > > > > 4 files changed, 891 insertions(+) > > > > > create mode 100644 drivers/irqchip/irq-riscv-aplic.c > > > > > create mode 100644 include/linux/irqchip/riscv-aplic.h > > > > > > > > > > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig > > > > > index d700980372ef..834c0329f583 100644 > > > > > --- a/drivers/irqchip/Kconfig > > > > > +++ b/drivers/irqchip/Kconfig > > > > > @@ -544,6 +544,12 @@ config SIFIVE_PLIC > > > > > select IRQ_DOMAIN_HIERARCHY > > > > > select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP > > > > > > > > > > +config RISCV_APLIC > > > > > + bool > > > > > + depends on RISCV > > > > > + select IRQ_DOMAIN_HIERARCHY > > > > > + select GENERIC_MSI_IRQ > > > > > + > > > > > config RISCV_IMSIC > > > > > bool > > > > > depends on RISCV > > > > > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile > > > > > index 577bde3e986b..438b8e1a152c 100644 > > > > > --- a/drivers/irqchip/Makefile > > > > > +++ b/drivers/irqchip/Makefile > > > > > @@ -95,6 +95,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o > > > > > obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o > > > > > obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o > > > > > obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o > > > > > +obj-$(CONFIG_RISCV_APLIC) += irq-riscv-aplic.o > > > > > obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o > > > > > obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o > > > > > obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o > > > > > diff --git a/drivers/irqchip/irq-riscv-aplic.c b/drivers/irqchip/irq-riscv-aplic.c > > > > > new file mode 100644 > > > > > index 000000000000..1e710fdf5608 > > > > > --- /dev/null > > > > > +++ b/drivers/irqchip/irq-riscv-aplic.c > > > > > @@ -0,0 +1,765 @@ > > > > > +// SPDX-License-Identifier: GPL-2.0 > > > > > +/* > > > > > + * Copyright (C) 2021 Western Digital Corporation or its affiliates. > > > > > + * Copyright (C) 2022 Ventana Micro Systems Inc. > > > > > + */ > > > > > + > > > > > +#define pr_fmt(fmt) "riscv-aplic: " fmt > > > > > +#include <linux/bitops.h> > > > > > +#include <linux/cpu.h> > > > > > +#include <linux/interrupt.h> > > > > > +#include <linux/io.h> > > > > > +#include <linux/irq.h> > > > > > +#include <linux/irqchip.h> > > > > > +#include <linux/irqchip/chained_irq.h> > > > > > +#include <linux/irqchip/riscv-aplic.h> > > > > > +#include <linux/irqchip/riscv-imsic.h> > > > > > +#include <linux/irqdomain.h> > > > > > +#include <linux/module.h> > > > > > +#include <linux/msi.h> > > > > > +#include <linux/platform_device.h> > > > > > +#include <linux/smp.h> > > > > > + > > > > > +#define APLIC_DEFAULT_PRIORITY 1 > > > > > +#define APLIC_DISABLE_IDELIVERY 0 > > > > > +#define APLIC_ENABLE_IDELIVERY 1 > > > > > +#define APLIC_DISABLE_ITHRESHOLD 1 > > > > > +#define APLIC_ENABLE_ITHRESHOLD 0 > > > > > + > > > > > +struct aplic_msicfg { > > > > > + phys_addr_t base_ppn; > > > > > + u32 hhxs; > > > > > + u32 hhxw; > > > > > + u32 lhxs; > > > > > + u32 lhxw; > > > > > +}; > > > > > + > > > > > +struct aplic_idc { > > > > > + unsigned int hart_index; > > > > > + void __iomem *regs; > > > > > + struct aplic_priv *priv; > > > > > +}; > > > > > + > > > > > +struct aplic_priv { > > > > > + struct fwnode_handle *fwnode; > > > > > + u32 gsi_base; > > > > > + u32 nr_irqs; > > > > > + u32 nr_idcs; > > > > > + void __iomem *regs; > > > > > + struct irq_domain *irqdomain; > > > > > + struct aplic_msicfg msicfg; > > > > > + struct cpumask lmask; > > > > > +}; > > > > > + > > > > > +static unsigned int aplic_idc_parent_irq; > > > > > +static DEFINE_PER_CPU(struct aplic_idc, aplic_idcs); > > > > > + > > > > > +static void aplic_irq_unmask(struct irq_data *d) > > > > > +{ > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > + > > > > > + writel(d->hwirq, priv->regs + APLIC_SETIENUM); > > > > > + > > > > > + if (!priv->nr_idcs) > > > > > + irq_chip_unmask_parent(d); > > > > > +} > > > > > + > > > > > +static void aplic_irq_mask(struct irq_data *d) > > > > > +{ > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > + > > > > > + writel(d->hwirq, priv->regs + APLIC_CLRIENUM); > > > > > + > > > > > + if (!priv->nr_idcs) > > > > > + irq_chip_mask_parent(d); > > > > > +} > > > > > + > > > > > +static int aplic_set_type(struct irq_data *d, unsigned int type) > > > > > +{ > > > > > + u32 val = 0; > > > > > + void __iomem *sourcecfg; > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > + > > > > > + switch (type) { > > > > > + case IRQ_TYPE_NONE: > > > > > + val = APLIC_SOURCECFG_SM_INACTIVE; > > > > > + break; > > > > > + case IRQ_TYPE_LEVEL_LOW: > > > > > + val = APLIC_SOURCECFG_SM_LEVEL_LOW; > > > > > + break; > > > > > + case IRQ_TYPE_LEVEL_HIGH: > > > > > + val = APLIC_SOURCECFG_SM_LEVEL_HIGH; > > > > > + break; > > > > > + case IRQ_TYPE_EDGE_FALLING: > > > > > + val = APLIC_SOURCECFG_SM_EDGE_FALL; > > > > > + break; > > > > > + case IRQ_TYPE_EDGE_RISING: > > > > > + val = APLIC_SOURCECFG_SM_EDGE_RISE; > > > > > + break; > > > > > + default: > > > > > + return -EINVAL; > > > > > + } > > > > > + > > > > > + sourcecfg = priv->regs + APLIC_SOURCECFG_BASE; > > > > > + sourcecfg += (d->hwirq - 1) * sizeof(u32); > > > > > + writel(val, sourcecfg); > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static void aplic_irq_eoi(struct irq_data *d) > > > > > +{ > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > + u32 reg_off, reg_mask; > > > > > + > > > > > + /* > > > > > + * EOI handling only required only for level-triggered > > > > > + * interrupts in APLIC MSI mode. > > > > > + */ > > > > > + > > > > > + if (priv->nr_idcs) > > > > > + return; > > > > > + > > > > > + reg_off = APLIC_CLRIP_BASE + ((d->hwirq / APLIC_IRQBITS_PER_REG) * 4); > > > > > + reg_mask = BIT(d->hwirq % APLIC_IRQBITS_PER_REG); > > > > > + switch (irqd_get_trigger_type(d)) { > > > > > + case IRQ_TYPE_LEVEL_LOW: > > > > > + if (!(readl(priv->regs + reg_off) & reg_mask)) > > > > > + writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE); > > > > > + break; > > > > > + case IRQ_TYPE_LEVEL_HIGH: > > > > > + if (readl(priv->regs + reg_off) & reg_mask) > > > > > + writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE); > > > > > + break; > > > > > + } > > > > > +} > > > > > + > > > > > +#ifdef CONFIG_SMP > > > > > +static int aplic_set_affinity(struct irq_data *d, > > > > > + const struct cpumask *mask_val, bool force) > > > > > +{ > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > + struct aplic_idc *idc; > > > > > + unsigned int cpu, val; > > > > > + struct cpumask amask; > > > > > + void __iomem *target; > > > > > + > > > > > + if (!priv->nr_idcs) > > > > > + return irq_chip_set_affinity_parent(d, mask_val, force); > > > > > + > > > > > + cpumask_and(&amask, &priv->lmask, mask_val); > > > > > + > > > > > + if (force) > > > > > + cpu = cpumask_first(&amask); > > > > > + else > > > > > + cpu = cpumask_any_and(&amask, cpu_online_mask); > > > > > + > > > > > + if (cpu >= nr_cpu_ids) > > > > > + return -EINVAL; > > > > > + > > > > > + idc = per_cpu_ptr(&aplic_idcs, cpu); > > > > > + target = priv->regs + APLIC_TARGET_BASE; > > > > > + target += (d->hwirq - 1) * sizeof(u32); > > > > > + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; > > > > > + val <<= APLIC_TARGET_HART_IDX_SHIFT; > > > > > + val |= APLIC_DEFAULT_PRIORITY; > > > > > + writel(val, target); > > > > > + > > > > > + irq_data_update_effective_affinity(d, cpumask_of(cpu)); > > > > > + > > > > > + return IRQ_SET_MASK_OK_DONE; > > > > > +} > > > > > +#endif > > > > > + > > > > > +static struct irq_chip aplic_chip = { > > > > > + .name = "RISC-V APLIC", > > > > > + .irq_mask = aplic_irq_mask, > > > > > + .irq_unmask = aplic_irq_unmask, > > > > > + .irq_set_type = aplic_set_type, > > > > > + .irq_eoi = aplic_irq_eoi, > > > > > +#ifdef CONFIG_SMP > > > > > + .irq_set_affinity = aplic_set_affinity, > > > > > +#endif > > > > > + .flags = IRQCHIP_SET_TYPE_MASKED | > > > > > + IRQCHIP_SKIP_SET_WAKE | > > > > > + IRQCHIP_MASK_ON_SUSPEND, > > > > > +}; > > > > > + > > > > > +static int aplic_irqdomain_translate(struct irq_fwspec *fwspec, > > > > > + u32 gsi_base, > > > > > + unsigned long *hwirq, > > > > > + unsigned int *type) > > > > > +{ > > > > > + if (WARN_ON(fwspec->param_count < 2)) > > > > > + return -EINVAL; > > > > > + if (WARN_ON(!fwspec->param[0])) > > > > > + return -EINVAL; > > > > > + > > > > > + /* For DT, gsi_base is always zero. */ > > > > > + *hwirq = fwspec->param[0] - gsi_base; > > > > > + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; > > > > > + > > > > > + WARN_ON(*type == IRQ_TYPE_NONE); > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static int aplic_irqdomain_msi_translate(struct irq_domain *d, > > > > > + struct irq_fwspec *fwspec, > > > > > + unsigned long *hwirq, > > > > > + unsigned int *type) > > > > > +{ > > > > > + struct aplic_priv *priv = platform_msi_get_host_data(d); > > > > > + > > > > > + return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type); > > > > > +} > > > > > + > > > > > +static int aplic_irqdomain_msi_alloc(struct irq_domain *domain, > > > > > + unsigned int virq, unsigned int nr_irqs, > > > > > + void *arg) > > > > > +{ > > > > > + int i, ret; > > > > > + unsigned int type; > > > > > + irq_hw_number_t hwirq; > > > > > + struct irq_fwspec *fwspec = arg; > > > > > + struct aplic_priv *priv = platform_msi_get_host_data(domain); > > > > > + > > > > > + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type); > > > > > + if (ret) > > > > > + return ret; > > > > > + > > > > > + ret = platform_msi_device_domain_alloc(domain, virq, nr_irqs); > > > > > + if (ret) > > > > > + return ret; > > > > > + > > > > > + for (i = 0; i < nr_irqs; i++) { > > > > > + irq_domain_set_info(domain, virq + i, hwirq + i, > > > > > + &aplic_chip, priv, handle_fasteoi_irq, > > > > > + NULL, NULL); > > > > > + /* > > > > > + * APLIC does not implement irq_disable() so Linux interrupt > > > > > + * subsystem will take a lazy approach for disabling an APLIC > > > > > + * interrupt. This means APLIC interrupts are left unmasked > > > > > + * upon system suspend and interrupts are not processed > > > > > + * immediately upon system wake up. To tackle this, we disable > > > > > + * the lazy approach for all APLIC interrupts. > > > > > + */ > > > > > + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY); > > > > > + } > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static const struct irq_domain_ops aplic_irqdomain_msi_ops = { > > > > > + .translate = aplic_irqdomain_msi_translate, > > > > > + .alloc = aplic_irqdomain_msi_alloc, > > > > > + .free = platform_msi_device_domain_free, > > > > > +}; > > > > > + > > > > > +static int aplic_irqdomain_idc_translate(struct irq_domain *d, > > > > > + struct irq_fwspec *fwspec, > > > > > + unsigned long *hwirq, > > > > > + unsigned int *type) > > > > > +{ > > > > > + struct aplic_priv *priv = d->host_data; > > > > > + > > > > > + return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type); > > > > > +} > > > > > + > > > > > +static int aplic_irqdomain_idc_alloc(struct irq_domain *domain, > > > > > + unsigned int virq, unsigned int nr_irqs, > > > > > + void *arg) > > > > > +{ > > > > > + int i, ret; > > > > > + unsigned int type; > > > > > + irq_hw_number_t hwirq; > > > > > + struct irq_fwspec *fwspec = arg; > > > > > + struct aplic_priv *priv = domain->host_data; > > > > > + > > > > > + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type); > > > > > + if (ret) > > > > > + return ret; > > > > > + > > > > > + for (i = 0; i < nr_irqs; i++) { > > > > > + irq_domain_set_info(domain, virq + i, hwirq + i, > > > > > + &aplic_chip, priv, handle_fasteoi_irq, > > > > > + NULL, NULL); > > > > > + irq_set_affinity(virq + i, &priv->lmask); > > > > > + /* See the reason described in aplic_irqdomain_msi_alloc() */ > > > > > + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY); > > > > > + } > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static const struct irq_domain_ops aplic_irqdomain_idc_ops = { > > > > > + .translate = aplic_irqdomain_idc_translate, > > > > > + .alloc = aplic_irqdomain_idc_alloc, > > > > > + .free = irq_domain_free_irqs_top, > > > > > +}; > > > > > + > > > > > +static void aplic_init_hw_irqs(struct aplic_priv *priv) > > > > > +{ > > > > > + int i; > > > > > + > > > > > + /* Disable all interrupts */ > > > > > + for (i = 0; i <= priv->nr_irqs; i += 32) > > > > > + writel(-1U, priv->regs + APLIC_CLRIE_BASE + > > > > > + (i / 32) * sizeof(u32)); > > > > > + > > > > > + /* Set interrupt type and default priority for all interrupts */ > > > > > + for (i = 1; i <= priv->nr_irqs; i++) { > > > > > + writel(0, priv->regs + APLIC_SOURCECFG_BASE + > > > > > + (i - 1) * sizeof(u32)); > > > > > + writel(APLIC_DEFAULT_PRIORITY, > > > > > + priv->regs + APLIC_TARGET_BASE + > > > > > + (i - 1) * sizeof(u32)); > > > > > + } > > > > > + > > > > > + /* Clear APLIC domaincfg */ > > > > > + writel(0, priv->regs + APLIC_DOMAINCFG); > > > > > +} > > > > > + > > > > > +static void aplic_init_hw_global(struct aplic_priv *priv) > > > > > +{ > > > > > + u32 val; > > > > > +#ifdef CONFIG_RISCV_M_MODE > > > > > + u32 valH; > > > > > + > > > > > + if (!priv->nr_idcs) { > > > > > + val = priv->msicfg.base_ppn; > > > > > + valH = (priv->msicfg.base_ppn >> 32) & > > > > > + APLIC_xMSICFGADDRH_BAPPN_MASK; > > > > > + valH |= (priv->msicfg.lhxw & APLIC_xMSICFGADDRH_LHXW_MASK) > > > > > + << APLIC_xMSICFGADDRH_LHXW_SHIFT; > > > > > + valH |= (priv->msicfg.hhxw & APLIC_xMSICFGADDRH_HHXW_MASK) > > > > > + << APLIC_xMSICFGADDRH_HHXW_SHIFT; > > > > > + valH |= (priv->msicfg.lhxs & APLIC_xMSICFGADDRH_LHXS_MASK) > > > > > + << APLIC_xMSICFGADDRH_LHXS_SHIFT; > > > > > + valH |= (priv->msicfg.hhxs & APLIC_xMSICFGADDRH_HHXS_MASK) > > > > > + << APLIC_xMSICFGADDRH_HHXS_SHIFT; > > > > > + writel(val, priv->regs + APLIC_xMSICFGADDR); > > > > > + writel(valH, priv->regs + APLIC_xMSICFGADDRH); > > > > > + } > > > > > +#endif > > > > > + > > > > > + /* Setup APLIC domaincfg register */ > > > > > + val = readl(priv->regs + APLIC_DOMAINCFG); > > > > > + val |= APLIC_DOMAINCFG_IE; > > > > > + if (!priv->nr_idcs) > > > > > + val |= APLIC_DOMAINCFG_DM; > > > > > + writel(val, priv->regs + APLIC_DOMAINCFG); > > > > > + if (readl(priv->regs + APLIC_DOMAINCFG) != val) > > > > > + pr_warn("%pfwP: unable to write 0x%x in domaincfg\n", > > > > > + priv->fwnode, val); > > > > > +} > > > > > + > > > > > +static void aplic_msi_write_msg(struct msi_desc *desc, struct msi_msg *msg) > > > > > +{ > > > > > + unsigned int group_index, hart_index, guest_index, val; > > > > > + struct irq_data *d = irq_get_irq_data(desc->irq); > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > + struct aplic_msicfg *mc = &priv->msicfg; > > > > > + phys_addr_t tppn, tbppn, msg_addr; > > > > > + void __iomem *target; > > > > > + > > > > > + /* For zeroed MSI, simply write zero into the target register */ > > > > > + if (!msg->address_hi && !msg->address_lo && !msg->data) { > > > > > + target = priv->regs + APLIC_TARGET_BASE; > > > > > + target += (d->hwirq - 1) * sizeof(u32); > > > > > + writel(0, target); > > > > > + return; > > > > > + } > > > > > + > > > > > + /* Sanity check on message data */ > > > > > + WARN_ON(msg->data > APLIC_TARGET_EIID_MASK); > > > > > + > > > > > + /* Compute target MSI address */ > > > > > + msg_addr = (((u64)msg->address_hi) << 32) | msg->address_lo; > > > > > + tppn = msg_addr >> APLIC_xMSICFGADDR_PPN_SHIFT; > > > > > + > > > > > + /* Compute target HART Base PPN */ > > > > > + tbppn = tppn; > > > > > + tbppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); > > > > > + tbppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs); > > > > > + tbppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs); > > > > > + WARN_ON(tbppn != mc->base_ppn); > > > > > + > > > > > + /* Compute target group and hart indexes */ > > > > > + group_index = (tppn >> APLIC_xMSICFGADDR_PPN_HHX_SHIFT(mc->hhxs)) & > > > > > + APLIC_xMSICFGADDR_PPN_HHX_MASK(mc->hhxw); > > > > > + hart_index = (tppn >> APLIC_xMSICFGADDR_PPN_LHX_SHIFT(mc->lhxs)) & > > > > > + APLIC_xMSICFGADDR_PPN_LHX_MASK(mc->lhxw); > > > > > + hart_index |= (group_index << mc->lhxw); > > > > > + WARN_ON(hart_index > APLIC_TARGET_HART_IDX_MASK); > > > > > + > > > > > + /* Compute target guest index */ > > > > > + guest_index = tppn & APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); > > > > > + WARN_ON(guest_index > APLIC_TARGET_GUEST_IDX_MASK); > > > > > + > > > > > + /* Update IRQ TARGET register */ > > > > > + target = priv->regs + APLIC_TARGET_BASE; > > > > > + target += (d->hwirq - 1) * sizeof(u32); > > > > > + val = (hart_index & APLIC_TARGET_HART_IDX_MASK) > > > > > + << APLIC_TARGET_HART_IDX_SHIFT; > > > > > + val |= (guest_index & APLIC_TARGET_GUEST_IDX_MASK) > > > > > + << APLIC_TARGET_GUEST_IDX_SHIFT; > > > > > + val |= (msg->data & APLIC_TARGET_EIID_MASK); > > > > > + writel(val, target); > > > > > +} > > > > > + > > > > > +static int aplic_setup_msi(struct aplic_priv *priv) > > > > > +{ > > > > > + struct aplic_msicfg *mc = &priv->msicfg; > > > > > + const struct imsic_global_config *imsic_global; > > > > > + > > > > > + /* > > > > > + * The APLIC outgoing MSI config registers assume target MSI > > > > > + * controller to be RISC-V AIA IMSIC controller. > > > > > + */ > > > > > + imsic_global = imsic_get_global_config(); > > > > > + if (!imsic_global) { > > > > > + pr_err("%pfwP: IMSIC global config not found\n", > > > > > + priv->fwnode); > > > > > + return -ENODEV; > > > > > + } > > > > > + > > > > > + /* Find number of guest index bits (LHXS) */ > > > > > + mc->lhxs = imsic_global->guest_index_bits; > > > > > + if (APLIC_xMSICFGADDRH_LHXS_MASK < mc->lhxs) { > > > > > + pr_err("%pfwP: IMSIC guest index bits big for APLIC LHXS\n", > > > > > + priv->fwnode); > > > > > + return -EINVAL; > > > > > + } > > > > > + > > > > > + /* Find number of HART index bits (LHXW) */ > > > > > + mc->lhxw = imsic_global->hart_index_bits; > > > > > + if (APLIC_xMSICFGADDRH_LHXW_MASK < mc->lhxw) { > > > > > + pr_err("%pfwP: IMSIC hart index bits big for APLIC LHXW\n", > > > > > + priv->fwnode); > > > > > + return -EINVAL; > > > > > + } > > > > > + > > > > > + /* Find number of group index bits (HHXW) */ > > > > > + mc->hhxw = imsic_global->group_index_bits; > > > > > + if (APLIC_xMSICFGADDRH_HHXW_MASK < mc->hhxw) { > > > > > + pr_err("%pfwP: IMSIC group index bits big for APLIC HHXW\n", > > > > > + priv->fwnode); > > > > > + return -EINVAL; > > > > > + } > > > > > + > > > > > + /* Find first bit position of group index (HHXS) */ > > > > > + mc->hhxs = imsic_global->group_index_shift; > > > > > + if (mc->hhxs < (2 * APLIC_xMSICFGADDR_PPN_SHIFT)) { > > > > > + pr_err("%pfwP: IMSIC group index shift should be >= %d\n", > > > > > + priv->fwnode, (2 * APLIC_xMSICFGADDR_PPN_SHIFT)); > > > > > + return -EINVAL; > > > > > + } > > > > > + mc->hhxs -= (2 * APLIC_xMSICFGADDR_PPN_SHIFT); > > > > > + if (APLIC_xMSICFGADDRH_HHXS_MASK < mc->hhxs) { > > > > > + pr_err("%pfwP: IMSIC group index shift big for APLIC HHXS\n", > > > > > + priv->fwnode); > > > > > + return -EINVAL; > > > > > + } > > > > > + > > > > > + /* Compute PPN base */ > > > > > + mc->base_ppn = imsic_global->base_addr >> APLIC_xMSICFGADDR_PPN_SHIFT; > > > > > + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); > > > > > + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs); > > > > > + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs); > > > > > + > > > > > + /* Use all possible CPUs as lmask */ > > > > > + cpumask_copy(&priv->lmask, cpu_possible_mask); > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +/* > > > > > + * To handle an APLIC IDC interrupts, we just read the CLAIMI register > > > > > + * which will return highest priority pending interrupt and clear the > > > > > + * pending bit of the interrupt. This process is repeated until CLAIMI > > > > > + * register return zero value. > > > > > + */ > > > > > +static void aplic_idc_handle_irq(struct irq_desc *desc) > > > > > +{ > > > > > + struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs); > > > > > + struct irq_chip *chip = irq_desc_get_chip(desc); > > > > > + irq_hw_number_t hw_irq; > > > > > + int irq; > > > > > + > > > > > + chained_irq_enter(chip, desc); > > > > > + > > > > > + while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) { > > > > > + hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT; > > > > > + irq = irq_find_mapping(idc->priv->irqdomain, hw_irq); > > > > > + > > > > > + if (unlikely(irq <= 0)) > > > > > + pr_warn_ratelimited("hw_irq %lu mapping not found\n", > > > > > + hw_irq); > > > > > + else > > > > > + generic_handle_irq(irq); > > > > > + } > > > > > + > > > > > + chained_irq_exit(chip, desc); > > > > > +} > > > > > + > > > > > +static void aplic_idc_set_delivery(struct aplic_idc *idc, bool en) > > > > > +{ > > > > > + u32 de = (en) ? APLIC_ENABLE_IDELIVERY : APLIC_DISABLE_IDELIVERY; > > > > > + u32 th = (en) ? APLIC_ENABLE_ITHRESHOLD : APLIC_DISABLE_ITHRESHOLD; > > > > > + > > > > > + /* Priority must be less than threshold for interrupt triggering */ > > > > > + writel(th, idc->regs + APLIC_IDC_ITHRESHOLD); > > > > > + > > > > > + /* Delivery must be set to 1 for interrupt triggering */ > > > > > + writel(de, idc->regs + APLIC_IDC_IDELIVERY); > > > > > +} > > > > > + > > > > > +static int aplic_idc_dying_cpu(unsigned int cpu) > > > > > +{ > > > > > + if (aplic_idc_parent_irq) > > > > > + disable_percpu_irq(aplic_idc_parent_irq); > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static int aplic_idc_starting_cpu(unsigned int cpu) > > > > > +{ > > > > > + if (aplic_idc_parent_irq) > > > > > + enable_percpu_irq(aplic_idc_parent_irq, > > > > > + irq_get_trigger_type(aplic_idc_parent_irq)); > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static int aplic_setup_idc(struct aplic_priv *priv) > > > > > +{ > > > > > + int i, j, rc, cpu, setup_count = 0; > > > > > + struct fwnode_reference_args parent; > > > > > + struct irq_domain *domain; > > > > > + unsigned long hartid; > > > > > + struct aplic_idc *idc; > > > > > + u32 val; > > > > > + > > > > > + /* Setup per-CPU IDC and target CPU mask */ > > > > > + for (i = 0; i < priv->nr_idcs; i++) { > > > > > + rc = fwnode_property_get_reference_args(priv->fwnode, > > > > > + "interrupts-extended", "#interrupt-cells", > > > > > + 0, i, &parent); > > > > > + if (rc) { > > > > > + pr_warn("%pfwP: parent irq for IDC%d not found\n", > > > > > + priv->fwnode, i); > > > > > + continue; > > > > > + } > > > > > + > > > > > + /* > > > > > + * Skip interrupts other than external interrupts for > > > > > + * current privilege level. > > > > > + */ > > > > > + if (parent.args[0] != RV_IRQ_EXT) > > > > > + continue; > > > > > + > > > > > + rc = riscv_fw_parent_hartid(parent.fwnode, &hartid); > > > > > + if (rc) { > > > > > + pr_warn("%pfwP: invalid hartid for IDC%d\n", > > > > > + priv->fwnode, i); > > > > > + continue; > > > > > + } > > > > > + > > > > > + cpu = riscv_hartid_to_cpuid(hartid); > > > > > + if (cpu < 0) { > > > > > + pr_warn("%pfwP: invalid cpuid for IDC%d\n", > > > > > + priv->fwnode, i); > > > > > + continue; > > > > > + } > > > > > + > > > > > + cpumask_set_cpu(cpu, &priv->lmask); > > > > > + > > > > > + idc = per_cpu_ptr(&aplic_idcs, cpu); > > > > > + idc->hart_index = i; > > > > > + idc->regs = priv->regs + APLIC_IDC_BASE + i * APLIC_IDC_SIZE; > > > > > + idc->priv = priv; > > > > > + > > > > > + aplic_idc_set_delivery(idc, true); > > > > > + > > > > > + /* > > > > > + * Boot cpu might not have APLIC hart_index = 0 so check > > > > > + * and update target registers of all interrupts. > > > > > + */ > > > > > + if (cpu == smp_processor_id() && idc->hart_index) { > > > > > + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; > > > > > + val <<= APLIC_TARGET_HART_IDX_SHIFT; > > > > > + val |= APLIC_DEFAULT_PRIORITY; > > > > > + for (j = 1; j <= priv->nr_irqs; j++) > > > > > + writel(val, priv->regs + APLIC_TARGET_BASE + > > > > > + (j - 1) * sizeof(u32)); > > > > > + } > > > > > + > > > > > + setup_count++; > > > > > + } > > > > > + > > > > > + /* Find parent domain and register chained handler */ > > > > > + domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), > > > > > + DOMAIN_BUS_ANY); > > > > > + if (!aplic_idc_parent_irq && domain) { > > > > > + aplic_idc_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT); > > > > > + if (aplic_idc_parent_irq) { > > > > > + irq_set_chained_handler(aplic_idc_parent_irq, > > > > > + aplic_idc_handle_irq); > > > > > + > > > > > + /* > > > > > + * Setup CPUHP notifier to enable IDC parent > > > > > + * interrupt on all CPUs > > > > > + */ > > > > > + cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, > > > > > + "irqchip/riscv/aplic:starting", > > > > > + aplic_idc_starting_cpu, > > > > > + aplic_idc_dying_cpu); > > > > > + } > > > > > + } > > > > > + > > > > > + /* Fail if we were not able to setup IDC for any CPU */ > > > > > + return (setup_count) ? 0 : -ENODEV; > > > > > +} > > > > > + > > > > > +static int aplic_probe(struct platform_device *pdev) > > > > > +{ > > > > > + struct fwnode_handle *fwnode = pdev->dev.fwnode; > > > > > + struct fwnode_reference_args parent; > > > > > + struct aplic_priv *priv; > > > > > + struct resource *res; > > > > > + phys_addr_t pa; > > > > > + int rc; > > > > > + > > > > > + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); > > > > > + if (!priv) > > > > > + return -ENOMEM; > > > > > + priv->fwnode = fwnode; > > > > > + > > > > > + /* Map the MMIO registers */ > > > > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > > > > + if (!res) { > > > > > + pr_err("%pfwP: failed to get MMIO resource\n", fwnode); > > > > > + return -EINVAL; > > > > > + } > > > > > + priv->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); > > > > > + if (!priv->regs) { > > > > > + pr_err("%pfwP: failed map MMIO registers\n", fwnode); > > > > > + return -ENOMEM; > > > > > + } > > > > > + > > > > > + /* > > > > > + * Find out GSI base number > > > > > + * > > > > > + * Note: DT does not define "riscv,gsi-base" property so GSI > > > > > + * base is always zero for DT. > > > > > + */ > > > > > + rc = fwnode_property_read_u32_array(fwnode, "riscv,gsi-base", > > > > > + &priv->gsi_base, 1); > > > > > + if (rc) > > > > > + priv->gsi_base = 0; > > > > > + > > > > > + /* Find out number of interrupt sources */ > > > > > + rc = fwnode_property_read_u32_array(fwnode, "riscv,num-sources", > > > > > + &priv->nr_irqs, 1); > > > > > + if (rc) { > > > > > + pr_err("%pfwP: failed to get number of interrupt sources\n", > > > > > + fwnode); > > > > > + return rc; > > > > > + } > > > > > + > > > > > + /* Setup initial state APLIC interrupts */ > > > > > + aplic_init_hw_irqs(priv); > > > > > + > > > > > + /* > > > > > + * Find out number of IDCs based on parent interrupts > > > > > + * > > > > > + * If "msi-parent" property is present then we ignore the > > > > > + * APLIC IDCs which forces the APLIC driver to use MSI mode. > > > > > + */ > > > > > + if (!fwnode_property_present(fwnode, "msi-parent")) { > > > > > + while (!fwnode_property_get_reference_args(fwnode, > > > > > + "interrupts-extended", "#interrupt-cells", > > > > > + 0, priv->nr_idcs, &parent)) > > > > > + priv->nr_idcs++; > > > > > + } > > > > > + > > > > > + /* Setup IDCs or MSIs based on number of IDCs */ > > > > > + if (priv->nr_idcs) > > > > > + rc = aplic_setup_idc(priv); > > > > > + else > > > > > + rc = aplic_setup_msi(priv); > > > > > + if (rc) { > > > > > + pr_err("%pfwP: failed setup %s\n", > > > > > + fwnode, priv->nr_idcs ? "IDCs" : "MSIs"); > > > > > + return rc; > > > > > + } > > > > > + > > > > > + /* Setup global config and interrupt delivery */ > > > > > + aplic_init_hw_global(priv); > > > > > + > > > > > + /* Create irq domain instance for the APLIC */ > > > > > + if (priv->nr_idcs) > > > > > + priv->irqdomain = irq_domain_create_linear( > > > > > + priv->fwnode, > > > > > + priv->nr_irqs + 1, > > > > > + &aplic_irqdomain_idc_ops, > > > > > + priv); > > > > > + else > > > > > + priv->irqdomain = platform_msi_create_device_domain( > > > > > + &pdev->dev, > > > > > + priv->nr_irqs + 1, > > > > > + aplic_msi_write_msg, > > > > > + &aplic_irqdomain_msi_ops, > > > > > + priv); > > > > > + if (!priv->irqdomain) { > > > > > + pr_err("%pfwP: failed to add irq domain\n", priv->fwnode); > > > > > + return -ENOMEM; > > > > > + } > > > > > + > > > > > + /* Advertise the interrupt controller */ > > > > > + if (priv->nr_idcs) { > > > > > + pr_info("%pfwP: %d interrupts directly connected to %d CPUs\n", > > > > > + priv->fwnode, priv->nr_irqs, priv->nr_idcs); > > > > > + } else { > > > > > + pa = priv->msicfg.base_ppn << APLIC_xMSICFGADDR_PPN_SHIFT; > > > > > + pr_info("%pfwP: %d interrupts forwared to MSI base %pa\n", > > > > > + priv->fwnode, priv->nr_irqs, &pa); > > > > > + } > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static const struct of_device_id aplic_match[] = { > > > > > + { .compatible = "riscv,aplic" }, > > > > > + {} > > > > > +}; > > > > > + > > > > > +static struct platform_driver aplic_driver = { > > > > > + .driver = { > > > > > + .name = "riscv-aplic", > > > > > + .of_match_table = aplic_match, > > > > > + }, > > > > > + .probe = aplic_probe, > > > > > +}; > > > > > +builtin_platform_driver(aplic_driver); > > > > > + > > > > > +static int __init aplic_dt_init(struct device_node *node, > > > > > + struct device_node *parent) > > > > > +{ > > > > > + /* > > > > > + * The APLIC platform driver needs to be probed early > > > > > + * so for device tree: > > > > > + * > > > > > + * 1) Set the FWNODE_FLAG_BEST_EFFORT flag in fwnode which > > > > > + * provides a hint to the device driver core to probe the > > > > > + * platform driver early. > > > > > + * 2) Clear the OF_POPULATED flag in device_node because > > > > > + * of_irq_init() sets it which prevents creation of > > > > > + * platform device. > > > > > + */ > > > > > + node->fwnode.flags |= FWNODE_FLAG_BEST_EFFORT; > > > > > > > > NACK. You are blindly plastering flags without trying to understand > > > > the real issue and fixing this correctly. > > > > > > > > > + of_node_clear_flag(node, OF_POPULATED); > > > > > + return 0; > > > > > +} > > > > > +IRQCHIP_DECLARE(riscv_aplic, "riscv,aplic", aplic_dt_init); > > > > > > > > This macro pretty much skips the entire driver core framework to probe > > > > and calls init and you are supposed to initialize the device when the > > > > init function is called. > > > > > > > > If you want your device/driver to follow the proper platform driver > > > > path (which is recommended), then you need to use the > > > > IRQCHIP_PLATFORM_DRIVER_BEGIN() and related macros. Grep for plenty of examples. > > > > > > > > I offered to help you debug this issue and I asked for a dts file that > > > > corresponds to a board you are testing this on and seeing an issue. > > > > But you haven't answered my question [1] and are pointing to some > > > > random commit and blaming it. That commit has no impact on any > > > > existing devices/drivers. > > > > > > > > Hi Marc, > > > > > > > > Please consider this patch Nacked as long as FWNODE_FLAG_BEST_EFFORT > > > > is used or until Anup actually works with us to debug the real issue. > > > > > > Maybe I misread your previous comment. > > > > > > You can easily reproduce the issue on QEMU virt machine for RISC-V: > > > 1) Build qemu-system-riscv64 from latest QEMU master > > > 2) Build kernel from riscv_aia_v4 branch at https://github.com/avpatel/linux.git > > > (Note: make sure you remove the FWNODE_FLAG_BEST_EFFORT flag from > > > APLIC driver at the time of building kernel) > > > 3) Boot a APLIC-only system on QEMU virt machine > > > qemu-system-riscv64 -smp 4 -M virt,aia=aplic -m 1G -nographic \ > > > -bios opensbi/build/platform/generic/firmware/fw_dynamic.bin \ > > > -kernel ./build-riscv64/arch/riscv/boot/Image \ > > > -append "root=/dev/ram rw console=ttyS0 earlycon" \ > > > -initrd ./rootfs_riscv64.img > > > > Unfortunately, I don't have the time to do all that, but I generally > > don't need to run something to figure out the issue. It's generally > > fairly obvious once I look at the DT. I'll also lean on you for some > > debug logs. > > The boot log with FWNODE_BEST_EFFORT flag in APLIC can be > found at: > https://drive.google.com/file/d/1C-uuHbh6Zk9xkAsfGLfhb_4WighvmQp1/view?usp=sharing > > The boot log without FWNODE_BEST_EFFORT flag in APLIC can > be found at: > https://drive.google.com/file/d/12SRdR-2Frv_5O06kbuI_LUJ88khjf_7O/view?usp=sharing > > > > > Where is the dts file that corresponds to this QEMU run? This is the > > third time I'm asking for a pointer to a dts file that has this issue, > > can you point me to it please? I shouldn't have to say this but: put > > it somewhere and point me to it please. Please don't point me to some > > git repo and ask me to dig around. > > For QEMU virt machine, the DTB is generated at runtime as part of > virt machine creation. The DTS dumped by QEMU using the "dumpdtb" > command line option can be found at: > https://drive.google.com/file/d/1EU-exItL1B7EWuoXw4q-Ypocq--5Wvn8/view?usp=sharing > > > > > Can you give me details on what supplier is causing the deferred probe > > that's a problem for you? Any other details you can provide that'll > > help debug this issue? > > FWNODE supplier for APLIC DT node is the OF framework. > > > > > > I hope the above steps help you reproduce the issue. I will certainly > > > test whatever fix you propose. > > > > Do you plan to try the fix I suggested already? The one about using > > the correct macros? > > You mean use IRQCHIP_DECLARE() in the APLIC driver ? > or something else ? No. My previous email asking you to NOT use IRQCHIP_DECLARE() and instead use IRQCHIP_PLATFORM_DRIVER_BEGIN/END() macros. -Saravana
On Fri, Jun 23, 2023 at 2:27 AM Saravana Kannan <saravanak@google.com> wrote: > > On Sun, Jun 18, 2023 at 11:13 PM Anup Patel <apatel@ventanamicro.com> wrote: > > > > On Sat, Jun 17, 2023 at 3:36 AM Saravana Kannan <saravanak@google.com> wrote: > > > > > > On Thu, Jun 15, 2023 at 7:01 PM Anup Patel <anup@brainfault.org> wrote: > > > > > > > > On Fri, Jun 16, 2023 at 12:47 AM Saravana Kannan <saravanak@google.com> wrote: > > > > > > > > > > On Tue, Jun 13, 2023 at 8:35 AM Anup Patel <apatel@ventanamicro.com> wrote: > > > > > > > > > > > > The RISC-V advanced interrupt architecture (AIA) specification defines > > > > > > a new interrupt controller for managing wired interrupts on a RISC-V > > > > > > platform. This new interrupt controller is referred to as advanced > > > > > > platform-level interrupt controller (APLIC) which can forward wired > > > > > > interrupts to CPUs (or HARTs) as local interrupts OR as message > > > > > > signaled interrupts. > > > > > > (For more details refer https://github.com/riscv/riscv-aia) > > > > > > > > > > > > This patch adds an irqchip driver for RISC-V APLIC found on RISC-V > > > > > > platforms. > > > > > > > > > > > > Signed-off-by: Anup Patel <apatel@ventanamicro.com> > > > > > > --- > > > > > > drivers/irqchip/Kconfig | 6 + > > > > > > drivers/irqchip/Makefile | 1 + > > > > > > drivers/irqchip/irq-riscv-aplic.c | 765 ++++++++++++++++++++++++++++ > > > > > > include/linux/irqchip/riscv-aplic.h | 119 +++++ > > > > > > 4 files changed, 891 insertions(+) > > > > > > create mode 100644 drivers/irqchip/irq-riscv-aplic.c > > > > > > create mode 100644 include/linux/irqchip/riscv-aplic.h > > > > > > > > > > > > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig > > > > > > index d700980372ef..834c0329f583 100644 > > > > > > --- a/drivers/irqchip/Kconfig > > > > > > +++ b/drivers/irqchip/Kconfig > > > > > > @@ -544,6 +544,12 @@ config SIFIVE_PLIC > > > > > > select IRQ_DOMAIN_HIERARCHY > > > > > > select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP > > > > > > > > > > > > +config RISCV_APLIC > > > > > > + bool > > > > > > + depends on RISCV > > > > > > + select IRQ_DOMAIN_HIERARCHY > > > > > > + select GENERIC_MSI_IRQ > > > > > > + > > > > > > config RISCV_IMSIC > > > > > > bool > > > > > > depends on RISCV > > > > > > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile > > > > > > index 577bde3e986b..438b8e1a152c 100644 > > > > > > --- a/drivers/irqchip/Makefile > > > > > > +++ b/drivers/irqchip/Makefile > > > > > > @@ -95,6 +95,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o > > > > > > obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o > > > > > > obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o > > > > > > obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o > > > > > > +obj-$(CONFIG_RISCV_APLIC) += irq-riscv-aplic.o > > > > > > obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o > > > > > > obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o > > > > > > obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o > > > > > > diff --git a/drivers/irqchip/irq-riscv-aplic.c b/drivers/irqchip/irq-riscv-aplic.c > > > > > > new file mode 100644 > > > > > > index 000000000000..1e710fdf5608 > > > > > > --- /dev/null > > > > > > +++ b/drivers/irqchip/irq-riscv-aplic.c > > > > > > @@ -0,0 +1,765 @@ > > > > > > +// SPDX-License-Identifier: GPL-2.0 > > > > > > +/* > > > > > > + * Copyright (C) 2021 Western Digital Corporation or its affiliates. > > > > > > + * Copyright (C) 2022 Ventana Micro Systems Inc. > > > > > > + */ > > > > > > + > > > > > > +#define pr_fmt(fmt) "riscv-aplic: " fmt > > > > > > +#include <linux/bitops.h> > > > > > > +#include <linux/cpu.h> > > > > > > +#include <linux/interrupt.h> > > > > > > +#include <linux/io.h> > > > > > > +#include <linux/irq.h> > > > > > > +#include <linux/irqchip.h> > > > > > > +#include <linux/irqchip/chained_irq.h> > > > > > > +#include <linux/irqchip/riscv-aplic.h> > > > > > > +#include <linux/irqchip/riscv-imsic.h> > > > > > > +#include <linux/irqdomain.h> > > > > > > +#include <linux/module.h> > > > > > > +#include <linux/msi.h> > > > > > > +#include <linux/platform_device.h> > > > > > > +#include <linux/smp.h> > > > > > > + > > > > > > +#define APLIC_DEFAULT_PRIORITY 1 > > > > > > +#define APLIC_DISABLE_IDELIVERY 0 > > > > > > +#define APLIC_ENABLE_IDELIVERY 1 > > > > > > +#define APLIC_DISABLE_ITHRESHOLD 1 > > > > > > +#define APLIC_ENABLE_ITHRESHOLD 0 > > > > > > + > > > > > > +struct aplic_msicfg { > > > > > > + phys_addr_t base_ppn; > > > > > > + u32 hhxs; > > > > > > + u32 hhxw; > > > > > > + u32 lhxs; > > > > > > + u32 lhxw; > > > > > > +}; > > > > > > + > > > > > > +struct aplic_idc { > > > > > > + unsigned int hart_index; > > > > > > + void __iomem *regs; > > > > > > + struct aplic_priv *priv; > > > > > > +}; > > > > > > + > > > > > > +struct aplic_priv { > > > > > > + struct fwnode_handle *fwnode; > > > > > > + u32 gsi_base; > > > > > > + u32 nr_irqs; > > > > > > + u32 nr_idcs; > > > > > > + void __iomem *regs; > > > > > > + struct irq_domain *irqdomain; > > > > > > + struct aplic_msicfg msicfg; > > > > > > + struct cpumask lmask; > > > > > > +}; > > > > > > + > > > > > > +static unsigned int aplic_idc_parent_irq; > > > > > > +static DEFINE_PER_CPU(struct aplic_idc, aplic_idcs); > > > > > > + > > > > > > +static void aplic_irq_unmask(struct irq_data *d) > > > > > > +{ > > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > > + > > > > > > + writel(d->hwirq, priv->regs + APLIC_SETIENUM); > > > > > > + > > > > > > + if (!priv->nr_idcs) > > > > > > + irq_chip_unmask_parent(d); > > > > > > +} > > > > > > + > > > > > > +static void aplic_irq_mask(struct irq_data *d) > > > > > > +{ > > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > > + > > > > > > + writel(d->hwirq, priv->regs + APLIC_CLRIENUM); > > > > > > + > > > > > > + if (!priv->nr_idcs) > > > > > > + irq_chip_mask_parent(d); > > > > > > +} > > > > > > + > > > > > > +static int aplic_set_type(struct irq_data *d, unsigned int type) > > > > > > +{ > > > > > > + u32 val = 0; > > > > > > + void __iomem *sourcecfg; > > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > > + > > > > > > + switch (type) { > > > > > > + case IRQ_TYPE_NONE: > > > > > > + val = APLIC_SOURCECFG_SM_INACTIVE; > > > > > > + break; > > > > > > + case IRQ_TYPE_LEVEL_LOW: > > > > > > + val = APLIC_SOURCECFG_SM_LEVEL_LOW; > > > > > > + break; > > > > > > + case IRQ_TYPE_LEVEL_HIGH: > > > > > > + val = APLIC_SOURCECFG_SM_LEVEL_HIGH; > > > > > > + break; > > > > > > + case IRQ_TYPE_EDGE_FALLING: > > > > > > + val = APLIC_SOURCECFG_SM_EDGE_FALL; > > > > > > + break; > > > > > > + case IRQ_TYPE_EDGE_RISING: > > > > > > + val = APLIC_SOURCECFG_SM_EDGE_RISE; > > > > > > + break; > > > > > > + default: > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + > > > > > > + sourcecfg = priv->regs + APLIC_SOURCECFG_BASE; > > > > > > + sourcecfg += (d->hwirq - 1) * sizeof(u32); > > > > > > + writel(val, sourcecfg); > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static void aplic_irq_eoi(struct irq_data *d) > > > > > > +{ > > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > > + u32 reg_off, reg_mask; > > > > > > + > > > > > > + /* > > > > > > + * EOI handling only required only for level-triggered > > > > > > + * interrupts in APLIC MSI mode. > > > > > > + */ > > > > > > + > > > > > > + if (priv->nr_idcs) > > > > > > + return; > > > > > > + > > > > > > + reg_off = APLIC_CLRIP_BASE + ((d->hwirq / APLIC_IRQBITS_PER_REG) * 4); > > > > > > + reg_mask = BIT(d->hwirq % APLIC_IRQBITS_PER_REG); > > > > > > + switch (irqd_get_trigger_type(d)) { > > > > > > + case IRQ_TYPE_LEVEL_LOW: > > > > > > + if (!(readl(priv->regs + reg_off) & reg_mask)) > > > > > > + writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE); > > > > > > + break; > > > > > > + case IRQ_TYPE_LEVEL_HIGH: > > > > > > + if (readl(priv->regs + reg_off) & reg_mask) > > > > > > + writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE); > > > > > > + break; > > > > > > + } > > > > > > +} > > > > > > + > > > > > > +#ifdef CONFIG_SMP > > > > > > +static int aplic_set_affinity(struct irq_data *d, > > > > > > + const struct cpumask *mask_val, bool force) > > > > > > +{ > > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > > + struct aplic_idc *idc; > > > > > > + unsigned int cpu, val; > > > > > > + struct cpumask amask; > > > > > > + void __iomem *target; > > > > > > + > > > > > > + if (!priv->nr_idcs) > > > > > > + return irq_chip_set_affinity_parent(d, mask_val, force); > > > > > > + > > > > > > + cpumask_and(&amask, &priv->lmask, mask_val); > > > > > > + > > > > > > + if (force) > > > > > > + cpu = cpumask_first(&amask); > > > > > > + else > > > > > > + cpu = cpumask_any_and(&amask, cpu_online_mask); > > > > > > + > > > > > > + if (cpu >= nr_cpu_ids) > > > > > > + return -EINVAL; > > > > > > + > > > > > > + idc = per_cpu_ptr(&aplic_idcs, cpu); > > > > > > + target = priv->regs + APLIC_TARGET_BASE; > > > > > > + target += (d->hwirq - 1) * sizeof(u32); > > > > > > + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; > > > > > > + val <<= APLIC_TARGET_HART_IDX_SHIFT; > > > > > > + val |= APLIC_DEFAULT_PRIORITY; > > > > > > + writel(val, target); > > > > > > + > > > > > > + irq_data_update_effective_affinity(d, cpumask_of(cpu)); > > > > > > + > > > > > > + return IRQ_SET_MASK_OK_DONE; > > > > > > +} > > > > > > +#endif > > > > > > + > > > > > > +static struct irq_chip aplic_chip = { > > > > > > + .name = "RISC-V APLIC", > > > > > > + .irq_mask = aplic_irq_mask, > > > > > > + .irq_unmask = aplic_irq_unmask, > > > > > > + .irq_set_type = aplic_set_type, > > > > > > + .irq_eoi = aplic_irq_eoi, > > > > > > +#ifdef CONFIG_SMP > > > > > > + .irq_set_affinity = aplic_set_affinity, > > > > > > +#endif > > > > > > + .flags = IRQCHIP_SET_TYPE_MASKED | > > > > > > + IRQCHIP_SKIP_SET_WAKE | > > > > > > + IRQCHIP_MASK_ON_SUSPEND, > > > > > > +}; > > > > > > + > > > > > > +static int aplic_irqdomain_translate(struct irq_fwspec *fwspec, > > > > > > + u32 gsi_base, > > > > > > + unsigned long *hwirq, > > > > > > + unsigned int *type) > > > > > > +{ > > > > > > + if (WARN_ON(fwspec->param_count < 2)) > > > > > > + return -EINVAL; > > > > > > + if (WARN_ON(!fwspec->param[0])) > > > > > > + return -EINVAL; > > > > > > + > > > > > > + /* For DT, gsi_base is always zero. */ > > > > > > + *hwirq = fwspec->param[0] - gsi_base; > > > > > > + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; > > > > > > + > > > > > > + WARN_ON(*type == IRQ_TYPE_NONE); > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static int aplic_irqdomain_msi_translate(struct irq_domain *d, > > > > > > + struct irq_fwspec *fwspec, > > > > > > + unsigned long *hwirq, > > > > > > + unsigned int *type) > > > > > > +{ > > > > > > + struct aplic_priv *priv = platform_msi_get_host_data(d); > > > > > > + > > > > > > + return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type); > > > > > > +} > > > > > > + > > > > > > +static int aplic_irqdomain_msi_alloc(struct irq_domain *domain, > > > > > > + unsigned int virq, unsigned int nr_irqs, > > > > > > + void *arg) > > > > > > +{ > > > > > > + int i, ret; > > > > > > + unsigned int type; > > > > > > + irq_hw_number_t hwirq; > > > > > > + struct irq_fwspec *fwspec = arg; > > > > > > + struct aplic_priv *priv = platform_msi_get_host_data(domain); > > > > > > + > > > > > > + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type); > > > > > > + if (ret) > > > > > > + return ret; > > > > > > + > > > > > > + ret = platform_msi_device_domain_alloc(domain, virq, nr_irqs); > > > > > > + if (ret) > > > > > > + return ret; > > > > > > + > > > > > > + for (i = 0; i < nr_irqs; i++) { > > > > > > + irq_domain_set_info(domain, virq + i, hwirq + i, > > > > > > + &aplic_chip, priv, handle_fasteoi_irq, > > > > > > + NULL, NULL); > > > > > > + /* > > > > > > + * APLIC does not implement irq_disable() so Linux interrupt > > > > > > + * subsystem will take a lazy approach for disabling an APLIC > > > > > > + * interrupt. This means APLIC interrupts are left unmasked > > > > > > + * upon system suspend and interrupts are not processed > > > > > > + * immediately upon system wake up. To tackle this, we disable > > > > > > + * the lazy approach for all APLIC interrupts. > > > > > > + */ > > > > > > + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY); > > > > > > + } > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static const struct irq_domain_ops aplic_irqdomain_msi_ops = { > > > > > > + .translate = aplic_irqdomain_msi_translate, > > > > > > + .alloc = aplic_irqdomain_msi_alloc, > > > > > > + .free = platform_msi_device_domain_free, > > > > > > +}; > > > > > > + > > > > > > +static int aplic_irqdomain_idc_translate(struct irq_domain *d, > > > > > > + struct irq_fwspec *fwspec, > > > > > > + unsigned long *hwirq, > > > > > > + unsigned int *type) > > > > > > +{ > > > > > > + struct aplic_priv *priv = d->host_data; > > > > > > + > > > > > > + return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type); > > > > > > +} > > > > > > + > > > > > > +static int aplic_irqdomain_idc_alloc(struct irq_domain *domain, > > > > > > + unsigned int virq, unsigned int nr_irqs, > > > > > > + void *arg) > > > > > > +{ > > > > > > + int i, ret; > > > > > > + unsigned int type; > > > > > > + irq_hw_number_t hwirq; > > > > > > + struct irq_fwspec *fwspec = arg; > > > > > > + struct aplic_priv *priv = domain->host_data; > > > > > > + > > > > > > + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type); > > > > > > + if (ret) > > > > > > + return ret; > > > > > > + > > > > > > + for (i = 0; i < nr_irqs; i++) { > > > > > > + irq_domain_set_info(domain, virq + i, hwirq + i, > > > > > > + &aplic_chip, priv, handle_fasteoi_irq, > > > > > > + NULL, NULL); > > > > > > + irq_set_affinity(virq + i, &priv->lmask); > > > > > > + /* See the reason described in aplic_irqdomain_msi_alloc() */ > > > > > > + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY); > > > > > > + } > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static const struct irq_domain_ops aplic_irqdomain_idc_ops = { > > > > > > + .translate = aplic_irqdomain_idc_translate, > > > > > > + .alloc = aplic_irqdomain_idc_alloc, > > > > > > + .free = irq_domain_free_irqs_top, > > > > > > +}; > > > > > > + > > > > > > +static void aplic_init_hw_irqs(struct aplic_priv *priv) > > > > > > +{ > > > > > > + int i; > > > > > > + > > > > > > + /* Disable all interrupts */ > > > > > > + for (i = 0; i <= priv->nr_irqs; i += 32) > > > > > > + writel(-1U, priv->regs + APLIC_CLRIE_BASE + > > > > > > + (i / 32) * sizeof(u32)); > > > > > > + > > > > > > + /* Set interrupt type and default priority for all interrupts */ > > > > > > + for (i = 1; i <= priv->nr_irqs; i++) { > > > > > > + writel(0, priv->regs + APLIC_SOURCECFG_BASE + > > > > > > + (i - 1) * sizeof(u32)); > > > > > > + writel(APLIC_DEFAULT_PRIORITY, > > > > > > + priv->regs + APLIC_TARGET_BASE + > > > > > > + (i - 1) * sizeof(u32)); > > > > > > + } > > > > > > + > > > > > > + /* Clear APLIC domaincfg */ > > > > > > + writel(0, priv->regs + APLIC_DOMAINCFG); > > > > > > +} > > > > > > + > > > > > > +static void aplic_init_hw_global(struct aplic_priv *priv) > > > > > > +{ > > > > > > + u32 val; > > > > > > +#ifdef CONFIG_RISCV_M_MODE > > > > > > + u32 valH; > > > > > > + > > > > > > + if (!priv->nr_idcs) { > > > > > > + val = priv->msicfg.base_ppn; > > > > > > + valH = (priv->msicfg.base_ppn >> 32) & > > > > > > + APLIC_xMSICFGADDRH_BAPPN_MASK; > > > > > > + valH |= (priv->msicfg.lhxw & APLIC_xMSICFGADDRH_LHXW_MASK) > > > > > > + << APLIC_xMSICFGADDRH_LHXW_SHIFT; > > > > > > + valH |= (priv->msicfg.hhxw & APLIC_xMSICFGADDRH_HHXW_MASK) > > > > > > + << APLIC_xMSICFGADDRH_HHXW_SHIFT; > > > > > > + valH |= (priv->msicfg.lhxs & APLIC_xMSICFGADDRH_LHXS_MASK) > > > > > > + << APLIC_xMSICFGADDRH_LHXS_SHIFT; > > > > > > + valH |= (priv->msicfg.hhxs & APLIC_xMSICFGADDRH_HHXS_MASK) > > > > > > + << APLIC_xMSICFGADDRH_HHXS_SHIFT; > > > > > > + writel(val, priv->regs + APLIC_xMSICFGADDR); > > > > > > + writel(valH, priv->regs + APLIC_xMSICFGADDRH); > > > > > > + } > > > > > > +#endif > > > > > > + > > > > > > + /* Setup APLIC domaincfg register */ > > > > > > + val = readl(priv->regs + APLIC_DOMAINCFG); > > > > > > + val |= APLIC_DOMAINCFG_IE; > > > > > > + if (!priv->nr_idcs) > > > > > > + val |= APLIC_DOMAINCFG_DM; > > > > > > + writel(val, priv->regs + APLIC_DOMAINCFG); > > > > > > + if (readl(priv->regs + APLIC_DOMAINCFG) != val) > > > > > > + pr_warn("%pfwP: unable to write 0x%x in domaincfg\n", > > > > > > + priv->fwnode, val); > > > > > > +} > > > > > > + > > > > > > +static void aplic_msi_write_msg(struct msi_desc *desc, struct msi_msg *msg) > > > > > > +{ > > > > > > + unsigned int group_index, hart_index, guest_index, val; > > > > > > + struct irq_data *d = irq_get_irq_data(desc->irq); > > > > > > + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); > > > > > > + struct aplic_msicfg *mc = &priv->msicfg; > > > > > > + phys_addr_t tppn, tbppn, msg_addr; > > > > > > + void __iomem *target; > > > > > > + > > > > > > + /* For zeroed MSI, simply write zero into the target register */ > > > > > > + if (!msg->address_hi && !msg->address_lo && !msg->data) { > > > > > > + target = priv->regs + APLIC_TARGET_BASE; > > > > > > + target += (d->hwirq - 1) * sizeof(u32); > > > > > > + writel(0, target); > > > > > > + return; > > > > > > + } > > > > > > + > > > > > > + /* Sanity check on message data */ > > > > > > + WARN_ON(msg->data > APLIC_TARGET_EIID_MASK); > > > > > > + > > > > > > + /* Compute target MSI address */ > > > > > > + msg_addr = (((u64)msg->address_hi) << 32) | msg->address_lo; > > > > > > + tppn = msg_addr >> APLIC_xMSICFGADDR_PPN_SHIFT; > > > > > > + > > > > > > + /* Compute target HART Base PPN */ > > > > > > + tbppn = tppn; > > > > > > + tbppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); > > > > > > + tbppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs); > > > > > > + tbppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs); > > > > > > + WARN_ON(tbppn != mc->base_ppn); > > > > > > + > > > > > > + /* Compute target group and hart indexes */ > > > > > > + group_index = (tppn >> APLIC_xMSICFGADDR_PPN_HHX_SHIFT(mc->hhxs)) & > > > > > > + APLIC_xMSICFGADDR_PPN_HHX_MASK(mc->hhxw); > > > > > > + hart_index = (tppn >> APLIC_xMSICFGADDR_PPN_LHX_SHIFT(mc->lhxs)) & > > > > > > + APLIC_xMSICFGADDR_PPN_LHX_MASK(mc->lhxw); > > > > > > + hart_index |= (group_index << mc->lhxw); > > > > > > + WARN_ON(hart_index > APLIC_TARGET_HART_IDX_MASK); > > > > > > + > > > > > > + /* Compute target guest index */ > > > > > > + guest_index = tppn & APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); > > > > > > + WARN_ON(guest_index > APLIC_TARGET_GUEST_IDX_MASK); > > > > > > + > > > > > > + /* Update IRQ TARGET register */ > > > > > > + target = priv->regs + APLIC_TARGET_BASE; > > > > > > + target += (d->hwirq - 1) * sizeof(u32); > > > > > > + val = (hart_index & APLIC_TARGET_HART_IDX_MASK) > > > > > > + << APLIC_TARGET_HART_IDX_SHIFT; > > > > > > + val |= (guest_index & APLIC_TARGET_GUEST_IDX_MASK) > > > > > > + << APLIC_TARGET_GUEST_IDX_SHIFT; > > > > > > + val |= (msg->data & APLIC_TARGET_EIID_MASK); > > > > > > + writel(val, target); > > > > > > +} > > > > > > + > > > > > > +static int aplic_setup_msi(struct aplic_priv *priv) > > > > > > +{ > > > > > > + struct aplic_msicfg *mc = &priv->msicfg; > > > > > > + const struct imsic_global_config *imsic_global; > > > > > > + > > > > > > + /* > > > > > > + * The APLIC outgoing MSI config registers assume target MSI > > > > > > + * controller to be RISC-V AIA IMSIC controller. > > > > > > + */ > > > > > > + imsic_global = imsic_get_global_config(); > > > > > > + if (!imsic_global) { > > > > > > + pr_err("%pfwP: IMSIC global config not found\n", > > > > > > + priv->fwnode); > > > > > > + return -ENODEV; > > > > > > + } > > > > > > + > > > > > > + /* Find number of guest index bits (LHXS) */ > > > > > > + mc->lhxs = imsic_global->guest_index_bits; > > > > > > + if (APLIC_xMSICFGADDRH_LHXS_MASK < mc->lhxs) { > > > > > > + pr_err("%pfwP: IMSIC guest index bits big for APLIC LHXS\n", > > > > > > + priv->fwnode); > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + > > > > > > + /* Find number of HART index bits (LHXW) */ > > > > > > + mc->lhxw = imsic_global->hart_index_bits; > > > > > > + if (APLIC_xMSICFGADDRH_LHXW_MASK < mc->lhxw) { > > > > > > + pr_err("%pfwP: IMSIC hart index bits big for APLIC LHXW\n", > > > > > > + priv->fwnode); > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + > > > > > > + /* Find number of group index bits (HHXW) */ > > > > > > + mc->hhxw = imsic_global->group_index_bits; > > > > > > + if (APLIC_xMSICFGADDRH_HHXW_MASK < mc->hhxw) { > > > > > > + pr_err("%pfwP: IMSIC group index bits big for APLIC HHXW\n", > > > > > > + priv->fwnode); > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + > > > > > > + /* Find first bit position of group index (HHXS) */ > > > > > > + mc->hhxs = imsic_global->group_index_shift; > > > > > > + if (mc->hhxs < (2 * APLIC_xMSICFGADDR_PPN_SHIFT)) { > > > > > > + pr_err("%pfwP: IMSIC group index shift should be >= %d\n", > > > > > > + priv->fwnode, (2 * APLIC_xMSICFGADDR_PPN_SHIFT)); > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + mc->hhxs -= (2 * APLIC_xMSICFGADDR_PPN_SHIFT); > > > > > > + if (APLIC_xMSICFGADDRH_HHXS_MASK < mc->hhxs) { > > > > > > + pr_err("%pfwP: IMSIC group index shift big for APLIC HHXS\n", > > > > > > + priv->fwnode); > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + > > > > > > + /* Compute PPN base */ > > > > > > + mc->base_ppn = imsic_global->base_addr >> APLIC_xMSICFGADDR_PPN_SHIFT; > > > > > > + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); > > > > > > + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs); > > > > > > + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs); > > > > > > + > > > > > > + /* Use all possible CPUs as lmask */ > > > > > > + cpumask_copy(&priv->lmask, cpu_possible_mask); > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +/* > > > > > > + * To handle an APLIC IDC interrupts, we just read the CLAIMI register > > > > > > + * which will return highest priority pending interrupt and clear the > > > > > > + * pending bit of the interrupt. This process is repeated until CLAIMI > > > > > > + * register return zero value. > > > > > > + */ > > > > > > +static void aplic_idc_handle_irq(struct irq_desc *desc) > > > > > > +{ > > > > > > + struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs); > > > > > > + struct irq_chip *chip = irq_desc_get_chip(desc); > > > > > > + irq_hw_number_t hw_irq; > > > > > > + int irq; > > > > > > + > > > > > > + chained_irq_enter(chip, desc); > > > > > > + > > > > > > + while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) { > > > > > > + hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT; > > > > > > + irq = irq_find_mapping(idc->priv->irqdomain, hw_irq); > > > > > > + > > > > > > + if (unlikely(irq <= 0)) > > > > > > + pr_warn_ratelimited("hw_irq %lu mapping not found\n", > > > > > > + hw_irq); > > > > > > + else > > > > > > + generic_handle_irq(irq); > > > > > > + } > > > > > > + > > > > > > + chained_irq_exit(chip, desc); > > > > > > +} > > > > > > + > > > > > > +static void aplic_idc_set_delivery(struct aplic_idc *idc, bool en) > > > > > > +{ > > > > > > + u32 de = (en) ? APLIC_ENABLE_IDELIVERY : APLIC_DISABLE_IDELIVERY; > > > > > > + u32 th = (en) ? APLIC_ENABLE_ITHRESHOLD : APLIC_DISABLE_ITHRESHOLD; > > > > > > + > > > > > > + /* Priority must be less than threshold for interrupt triggering */ > > > > > > + writel(th, idc->regs + APLIC_IDC_ITHRESHOLD); > > > > > > + > > > > > > + /* Delivery must be set to 1 for interrupt triggering */ > > > > > > + writel(de, idc->regs + APLIC_IDC_IDELIVERY); > > > > > > +} > > > > > > + > > > > > > +static int aplic_idc_dying_cpu(unsigned int cpu) > > > > > > +{ > > > > > > + if (aplic_idc_parent_irq) > > > > > > + disable_percpu_irq(aplic_idc_parent_irq); > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static int aplic_idc_starting_cpu(unsigned int cpu) > > > > > > +{ > > > > > > + if (aplic_idc_parent_irq) > > > > > > + enable_percpu_irq(aplic_idc_parent_irq, > > > > > > + irq_get_trigger_type(aplic_idc_parent_irq)); > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static int aplic_setup_idc(struct aplic_priv *priv) > > > > > > +{ > > > > > > + int i, j, rc, cpu, setup_count = 0; > > > > > > + struct fwnode_reference_args parent; > > > > > > + struct irq_domain *domain; > > > > > > + unsigned long hartid; > > > > > > + struct aplic_idc *idc; > > > > > > + u32 val; > > > > > > + > > > > > > + /* Setup per-CPU IDC and target CPU mask */ > > > > > > + for (i = 0; i < priv->nr_idcs; i++) { > > > > > > + rc = fwnode_property_get_reference_args(priv->fwnode, > > > > > > + "interrupts-extended", "#interrupt-cells", > > > > > > + 0, i, &parent); > > > > > > + if (rc) { > > > > > > + pr_warn("%pfwP: parent irq for IDC%d not found\n", > > > > > > + priv->fwnode, i); > > > > > > + continue; > > > > > > + } > > > > > > + > > > > > > + /* > > > > > > + * Skip interrupts other than external interrupts for > > > > > > + * current privilege level. > > > > > > + */ > > > > > > + if (parent.args[0] != RV_IRQ_EXT) > > > > > > + continue; > > > > > > + > > > > > > + rc = riscv_fw_parent_hartid(parent.fwnode, &hartid); > > > > > > + if (rc) { > > > > > > + pr_warn("%pfwP: invalid hartid for IDC%d\n", > > > > > > + priv->fwnode, i); > > > > > > + continue; > > > > > > + } > > > > > > + > > > > > > + cpu = riscv_hartid_to_cpuid(hartid); > > > > > > + if (cpu < 0) { > > > > > > + pr_warn("%pfwP: invalid cpuid for IDC%d\n", > > > > > > + priv->fwnode, i); > > > > > > + continue; > > > > > > + } > > > > > > + > > > > > > + cpumask_set_cpu(cpu, &priv->lmask); > > > > > > + > > > > > > + idc = per_cpu_ptr(&aplic_idcs, cpu); > > > > > > + idc->hart_index = i; > > > > > > + idc->regs = priv->regs + APLIC_IDC_BASE + i * APLIC_IDC_SIZE; > > > > > > + idc->priv = priv; > > > > > > + > > > > > > + aplic_idc_set_delivery(idc, true); > > > > > > + > > > > > > + /* > > > > > > + * Boot cpu might not have APLIC hart_index = 0 so check > > > > > > + * and update target registers of all interrupts. > > > > > > + */ > > > > > > + if (cpu == smp_processor_id() && idc->hart_index) { > > > > > > + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; > > > > > > + val <<= APLIC_TARGET_HART_IDX_SHIFT; > > > > > > + val |= APLIC_DEFAULT_PRIORITY; > > > > > > + for (j = 1; j <= priv->nr_irqs; j++) > > > > > > + writel(val, priv->regs + APLIC_TARGET_BASE + > > > > > > + (j - 1) * sizeof(u32)); > > > > > > + } > > > > > > + > > > > > > + setup_count++; > > > > > > + } > > > > > > + > > > > > > + /* Find parent domain and register chained handler */ > > > > > > + domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), > > > > > > + DOMAIN_BUS_ANY); > > > > > > + if (!aplic_idc_parent_irq && domain) { > > > > > > + aplic_idc_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT); > > > > > > + if (aplic_idc_parent_irq) { > > > > > > + irq_set_chained_handler(aplic_idc_parent_irq, > > > > > > + aplic_idc_handle_irq); > > > > > > + > > > > > > + /* > > > > > > + * Setup CPUHP notifier to enable IDC parent > > > > > > + * interrupt on all CPUs > > > > > > + */ > > > > > > + cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, > > > > > > + "irqchip/riscv/aplic:starting", > > > > > > + aplic_idc_starting_cpu, > > > > > > + aplic_idc_dying_cpu); > > > > > > + } > > > > > > + } > > > > > > + > > > > > > + /* Fail if we were not able to setup IDC for any CPU */ > > > > > > + return (setup_count) ? 0 : -ENODEV; > > > > > > +} > > > > > > + > > > > > > +static int aplic_probe(struct platform_device *pdev) > > > > > > +{ > > > > > > + struct fwnode_handle *fwnode = pdev->dev.fwnode; > > > > > > + struct fwnode_reference_args parent; > > > > > > + struct aplic_priv *priv; > > > > > > + struct resource *res; > > > > > > + phys_addr_t pa; > > > > > > + int rc; > > > > > > + > > > > > > + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); > > > > > > + if (!priv) > > > > > > + return -ENOMEM; > > > > > > + priv->fwnode = fwnode; > > > > > > + > > > > > > + /* Map the MMIO registers */ > > > > > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > > > > > + if (!res) { > > > > > > + pr_err("%pfwP: failed to get MMIO resource\n", fwnode); > > > > > > + return -EINVAL; > > > > > > + } > > > > > > + priv->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); > > > > > > + if (!priv->regs) { > > > > > > + pr_err("%pfwP: failed map MMIO registers\n", fwnode); > > > > > > + return -ENOMEM; > > > > > > + } > > > > > > + > > > > > > + /* > > > > > > + * Find out GSI base number > > > > > > + * > > > > > > + * Note: DT does not define "riscv,gsi-base" property so GSI > > > > > > + * base is always zero for DT. > > > > > > + */ > > > > > > + rc = fwnode_property_read_u32_array(fwnode, "riscv,gsi-base", > > > > > > + &priv->gsi_base, 1); > > > > > > + if (rc) > > > > > > + priv->gsi_base = 0; > > > > > > + > > > > > > + /* Find out number of interrupt sources */ > > > > > > + rc = fwnode_property_read_u32_array(fwnode, "riscv,num-sources", > > > > > > + &priv->nr_irqs, 1); > > > > > > + if (rc) { > > > > > > + pr_err("%pfwP: failed to get number of interrupt sources\n", > > > > > > + fwnode); > > > > > > + return rc; > > > > > > + } > > > > > > + > > > > > > + /* Setup initial state APLIC interrupts */ > > > > > > + aplic_init_hw_irqs(priv); > > > > > > + > > > > > > + /* > > > > > > + * Find out number of IDCs based on parent interrupts > > > > > > + * > > > > > > + * If "msi-parent" property is present then we ignore the > > > > > > + * APLIC IDCs which forces the APLIC driver to use MSI mode. > > > > > > + */ > > > > > > + if (!fwnode_property_present(fwnode, "msi-parent")) { > > > > > > + while (!fwnode_property_get_reference_args(fwnode, > > > > > > + "interrupts-extended", "#interrupt-cells", > > > > > > + 0, priv->nr_idcs, &parent)) > > > > > > + priv->nr_idcs++; > > > > > > + } > > > > > > + > > > > > > + /* Setup IDCs or MSIs based on number of IDCs */ > > > > > > + if (priv->nr_idcs) > > > > > > + rc = aplic_setup_idc(priv); > > > > > > + else > > > > > > + rc = aplic_setup_msi(priv); > > > > > > + if (rc) { > > > > > > + pr_err("%pfwP: failed setup %s\n", > > > > > > + fwnode, priv->nr_idcs ? "IDCs" : "MSIs"); > > > > > > + return rc; > > > > > > + } > > > > > > + > > > > > > + /* Setup global config and interrupt delivery */ > > > > > > + aplic_init_hw_global(priv); > > > > > > + > > > > > > + /* Create irq domain instance for the APLIC */ > > > > > > + if (priv->nr_idcs) > > > > > > + priv->irqdomain = irq_domain_create_linear( > > > > > > + priv->fwnode, > > > > > > + priv->nr_irqs + 1, > > > > > > + &aplic_irqdomain_idc_ops, > > > > > > + priv); > > > > > > + else > > > > > > + priv->irqdomain = platform_msi_create_device_domain( > > > > > > + &pdev->dev, > > > > > > + priv->nr_irqs + 1, > > > > > > + aplic_msi_write_msg, > > > > > > + &aplic_irqdomain_msi_ops, > > > > > > + priv); > > > > > > + if (!priv->irqdomain) { > > > > > > + pr_err("%pfwP: failed to add irq domain\n", priv->fwnode); > > > > > > + return -ENOMEM; > > > > > > + } > > > > > > + > > > > > > + /* Advertise the interrupt controller */ > > > > > > + if (priv->nr_idcs) { > > > > > > + pr_info("%pfwP: %d interrupts directly connected to %d CPUs\n", > > > > > > + priv->fwnode, priv->nr_irqs, priv->nr_idcs); > > > > > > + } else { > > > > > > + pa = priv->msicfg.base_ppn << APLIC_xMSICFGADDR_PPN_SHIFT; > > > > > > + pr_info("%pfwP: %d interrupts forwared to MSI base %pa\n", > > > > > > + priv->fwnode, priv->nr_irqs, &pa); > > > > > > + } > > > > > > + > > > > > > + return 0; > > > > > > +} > > > > > > + > > > > > > +static const struct of_device_id aplic_match[] = { > > > > > > + { .compatible = "riscv,aplic" }, > > > > > > + {} > > > > > > +}; > > > > > > + > > > > > > +static struct platform_driver aplic_driver = { > > > > > > + .driver = { > > > > > > + .name = "riscv-aplic", > > > > > > + .of_match_table = aplic_match, > > > > > > + }, > > > > > > + .probe = aplic_probe, > > > > > > +}; > > > > > > +builtin_platform_driver(aplic_driver); > > > > > > + > > > > > > +static int __init aplic_dt_init(struct device_node *node, > > > > > > + struct device_node *parent) > > > > > > +{ > > > > > > + /* > > > > > > + * The APLIC platform driver needs to be probed early > > > > > > + * so for device tree: > > > > > > + * > > > > > > + * 1) Set the FWNODE_FLAG_BEST_EFFORT flag in fwnode which > > > > > > + * provides a hint to the device driver core to probe the > > > > > > + * platform driver early. > > > > > > + * 2) Clear the OF_POPULATED flag in device_node because > > > > > > + * of_irq_init() sets it which prevents creation of > > > > > > + * platform device. > > > > > > + */ > > > > > > + node->fwnode.flags |= FWNODE_FLAG_BEST_EFFORT; > > > > > > > > > > NACK. You are blindly plastering flags without trying to understand > > > > > the real issue and fixing this correctly. > > > > > > > > > > > + of_node_clear_flag(node, OF_POPULATED); > > > > > > + return 0; > > > > > > +} > > > > > > +IRQCHIP_DECLARE(riscv_aplic, "riscv,aplic", aplic_dt_init); > > > > > > > > > > This macro pretty much skips the entire driver core framework to probe > > > > > and calls init and you are supposed to initialize the device when the > > > > > init function is called. > > > > > > > > > > If you want your device/driver to follow the proper platform driver > > > > > path (which is recommended), then you need to use the > > > > > IRQCHIP_PLATFORM_DRIVER_BEGIN() and related macros. Grep for plenty of examples. > > > > > > > > > > I offered to help you debug this issue and I asked for a dts file that > > > > > corresponds to a board you are testing this on and seeing an issue. > > > > > But you haven't answered my question [1] and are pointing to some > > > > > random commit and blaming it. That commit has no impact on any > > > > > existing devices/drivers. > > > > > > > > > > Hi Marc, > > > > > > > > > > Please consider this patch Nacked as long as FWNODE_FLAG_BEST_EFFORT > > > > > is used or until Anup actually works with us to debug the real issue. > > > > > > > > Maybe I misread your previous comment. > > > > > > > > You can easily reproduce the issue on QEMU virt machine for RISC-V: > > > > 1) Build qemu-system-riscv64 from latest QEMU master > > > > 2) Build kernel from riscv_aia_v4 branch at https://github.com/avpatel/linux.git > > > > (Note: make sure you remove the FWNODE_FLAG_BEST_EFFORT flag from > > > > APLIC driver at the time of building kernel) > > > > 3) Boot a APLIC-only system on QEMU virt machine > > > > qemu-system-riscv64 -smp 4 -M virt,aia=aplic -m 1G -nographic \ > > > > -bios opensbi/build/platform/generic/firmware/fw_dynamic.bin \ > > > > -kernel ./build-riscv64/arch/riscv/boot/Image \ > > > > -append "root=/dev/ram rw console=ttyS0 earlycon" \ > > > > -initrd ./rootfs_riscv64.img > > > > > > Unfortunately, I don't have the time to do all that, but I generally > > > don't need to run something to figure out the issue. It's generally > > > fairly obvious once I look at the DT. I'll also lean on you for some > > > debug logs. > > > > The boot log with FWNODE_BEST_EFFORT flag in APLIC can be > > found at: > > https://drive.google.com/file/d/1C-uuHbh6Zk9xkAsfGLfhb_4WighvmQp1/view?usp=sharing > > > > The boot log without FWNODE_BEST_EFFORT flag in APLIC can > > be found at: > > https://drive.google.com/file/d/12SRdR-2Frv_5O06kbuI_LUJ88khjf_7O/view?usp=sharing > > > > > > > > Where is the dts file that corresponds to this QEMU run? This is the > > > third time I'm asking for a pointer to a dts file that has this issue, > > > can you point me to it please? I shouldn't have to say this but: put > > > it somewhere and point me to it please. Please don't point me to some > > > git repo and ask me to dig around. > > > > For QEMU virt machine, the DTB is generated at runtime as part of > > virt machine creation. The DTS dumped by QEMU using the "dumpdtb" > > command line option can be found at: > > https://drive.google.com/file/d/1EU-exItL1B7EWuoXw4q-Ypocq--5Wvn8/view?usp=sharing > > > > > > > > Can you give me details on what supplier is causing the deferred probe > > > that's a problem for you? Any other details you can provide that'll > > > help debug this issue? > > > > FWNODE supplier for APLIC DT node is the OF framework. > > > > > > > > > I hope the above steps help you reproduce the issue. I will certainly > > > > test whatever fix you propose. > > > > > > Do you plan to try the fix I suggested already? The one about using > > > the correct macros? > > > > You mean use IRQCHIP_DECLARE() in the APLIC driver ? > > or something else ? > > No. My previous email asking you to NOT use IRQCHIP_DECLARE() and > instead use IRQCHIP_PLATFORM_DRIVER_BEGIN/END() macros. I tried IRQCHIP_PLATFORM_DRIVER_BEGIN/END() macros but these macros are not suitable for APLIC driver because we need platform device pointer in the APLIC probe() to create platform MSI device domain (refer, platform_msi_create_device_domain()). Further, I tried setting the "suppress_bind_attrs" flag in "struct platform_driver aplic_driver" just like the IRQCHIP_PLATFORM_DRIVER_END() macro but this did not work. Regards, Anup
[here, let me trim all of this nonsense...] On Fri, 23 Jun 2023 12:47:00 +0100, Anup Patel <apatel@ventanamicro.com> wrote: > > No. My previous email asking you to NOT use IRQCHIP_DECLARE() and > > instead use IRQCHIP_PLATFORM_DRIVER_BEGIN/END() macros. > > I tried IRQCHIP_PLATFORM_DRIVER_BEGIN/END() macros but these > macros are not suitable for APLIC driver because we need platform device > pointer in the APLIC probe() to create platform MSI device domain (refer, > platform_msi_create_device_domain()). Oh come on. How hard have you tried? Have you even looked at the other drivers in the tree to see how they solve this insurmountable problem with a *single* line of code? pdev = of_find_device_by_node(node); That's it. > Further, I tried setting the "suppress_bind_attrs" flag in "struct > platform_driver aplic_driver" just like the > IRQCHIP_PLATFORM_DRIVER_END() macro but this did not work. I'm not sure how relevant this is to the conversation. M.
On Fri, Jun 23, 2023 at 6:19 PM Marc Zyngier <maz@kernel.org> wrote: > > [here, let me trim all of this nonsense...] > > On Fri, 23 Jun 2023 12:47:00 +0100, > Anup Patel <apatel@ventanamicro.com> wrote: > > > No. My previous email asking you to NOT use IRQCHIP_DECLARE() and > > > instead use IRQCHIP_PLATFORM_DRIVER_BEGIN/END() macros. > > > > I tried IRQCHIP_PLATFORM_DRIVER_BEGIN/END() macros but these > > macros are not suitable for APLIC driver because we need platform device > > pointer in the APLIC probe() to create platform MSI device domain (refer, > > platform_msi_create_device_domain()). > > Oh come on. How hard have you tried? Have you even looked at the other > drivers in the tree to see how they solve this insurmountable problem > with a *single* line of code? > > pdev = of_find_device_by_node(node); > > That's it. Please see the below diff. I tried the same thing but still the APLIC does not get probed without the FWNODE_FLAG_BEST_EFFORT flag. Please note that the current APLIC driver works unmodified for both DT and ACPI but using of_find_device_by_node() here breaks ACPI support. diff --git a/drivers/irqchip/irq-riscv-aplic.c b/drivers/irqchip/irq-riscv-aplic.c index 1e710fdf5608..9ae9e7fb905f 100644 --- a/drivers/irqchip/irq-riscv-aplic.c +++ b/drivers/irqchip/irq-riscv-aplic.c @@ -17,6 +17,7 @@ #include <linux/irqdomain.h> #include <linux/module.h> #include <linux/msi.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/smp.h> @@ -730,36 +731,12 @@ static int aplic_probe(struct platform_device *pdev) return 0; } -static const struct of_device_id aplic_match[] = { - { .compatible = "riscv,aplic" }, - {} -}; - -static struct platform_driver aplic_driver = { - .driver = { - .name = "riscv-aplic", - .of_match_table = aplic_match, - }, - .probe = aplic_probe, -}; -builtin_platform_driver(aplic_driver); - -static int __init aplic_dt_init(struct device_node *node, +static int __init aplic_of_init(struct device_node *dn, struct device_node *parent) { - /* - * The APLIC platform driver needs to be probed early - * so for device tree: - * - * 1) Set the FWNODE_FLAG_BEST_EFFORT flag in fwnode which - * provides a hint to the device driver core to probe the - * platform driver early. - * 2) Clear the OF_POPULATED flag in device_node because - * of_irq_init() sets it which prevents creation of - * platform device. - */ - node->fwnode.flags |= FWNODE_FLAG_BEST_EFFORT; - of_node_clear_flag(node, OF_POPULATED); - return 0; + return aplic_probe(of_find_device_by_node(dn)); } -IRQCHIP_DECLARE(riscv_aplic, "riscv,aplic", aplic_dt_init); + +IRQCHIP_PLATFORM_DRIVER_BEGIN(aplic) +IRQCHIP_MATCH("riscv,aplic", aplic_of_init) +IRQCHIP_PLATFORM_DRIVER_END(aplic) > > > Further, I tried setting the "suppress_bind_attrs" flag in "struct > > platform_driver aplic_driver" just like the > > IRQCHIP_PLATFORM_DRIVER_END() macro but this did not work. > > I'm not sure how relevant this is to the conversation. It's relevant because the only difference in the platform_driver registered by IRQCHIP_PLATFORM_DRIVER_END() and "struct platform_driver aplic_driver" is the "suppress_bind_attrs" flag. Unfortunately, setting the "suppress_bind_attrs" flag does not help as well. > > M. > > -- > Without deviation from the norm, progress is not possible. Regards, Anup
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index d700980372ef..834c0329f583 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -544,6 +544,12 @@ config SIFIVE_PLIC select IRQ_DOMAIN_HIERARCHY select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP +config RISCV_APLIC + bool + depends on RISCV + select IRQ_DOMAIN_HIERARCHY + select GENERIC_MSI_IRQ + config RISCV_IMSIC bool depends on RISCV diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 577bde3e986b..438b8e1a152c 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -95,6 +95,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o +obj-$(CONFIG_RISCV_APLIC) += irq-riscv-aplic.o obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o diff --git a/drivers/irqchip/irq-riscv-aplic.c b/drivers/irqchip/irq-riscv-aplic.c new file mode 100644 index 000000000000..1e710fdf5608 --- /dev/null +++ b/drivers/irqchip/irq-riscv-aplic.c @@ -0,0 +1,765 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Western Digital Corporation or its affiliates. + * Copyright (C) 2022 Ventana Micro Systems Inc. + */ + +#define pr_fmt(fmt) "riscv-aplic: " fmt +#include <linux/bitops.h> +#include <linux/cpu.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqchip/riscv-aplic.h> +#include <linux/irqchip/riscv-imsic.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/msi.h> +#include <linux/platform_device.h> +#include <linux/smp.h> + +#define APLIC_DEFAULT_PRIORITY 1 +#define APLIC_DISABLE_IDELIVERY 0 +#define APLIC_ENABLE_IDELIVERY 1 +#define APLIC_DISABLE_ITHRESHOLD 1 +#define APLIC_ENABLE_ITHRESHOLD 0 + +struct aplic_msicfg { + phys_addr_t base_ppn; + u32 hhxs; + u32 hhxw; + u32 lhxs; + u32 lhxw; +}; + +struct aplic_idc { + unsigned int hart_index; + void __iomem *regs; + struct aplic_priv *priv; +}; + +struct aplic_priv { + struct fwnode_handle *fwnode; + u32 gsi_base; + u32 nr_irqs; + u32 nr_idcs; + void __iomem *regs; + struct irq_domain *irqdomain; + struct aplic_msicfg msicfg; + struct cpumask lmask; +}; + +static unsigned int aplic_idc_parent_irq; +static DEFINE_PER_CPU(struct aplic_idc, aplic_idcs); + +static void aplic_irq_unmask(struct irq_data *d) +{ + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); + + writel(d->hwirq, priv->regs + APLIC_SETIENUM); + + if (!priv->nr_idcs) + irq_chip_unmask_parent(d); +} + +static void aplic_irq_mask(struct irq_data *d) +{ + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); + + writel(d->hwirq, priv->regs + APLIC_CLRIENUM); + + if (!priv->nr_idcs) + irq_chip_mask_parent(d); +} + +static int aplic_set_type(struct irq_data *d, unsigned int type) +{ + u32 val = 0; + void __iomem *sourcecfg; + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); + + switch (type) { + case IRQ_TYPE_NONE: + val = APLIC_SOURCECFG_SM_INACTIVE; + break; + case IRQ_TYPE_LEVEL_LOW: + val = APLIC_SOURCECFG_SM_LEVEL_LOW; + break; + case IRQ_TYPE_LEVEL_HIGH: + val = APLIC_SOURCECFG_SM_LEVEL_HIGH; + break; + case IRQ_TYPE_EDGE_FALLING: + val = APLIC_SOURCECFG_SM_EDGE_FALL; + break; + case IRQ_TYPE_EDGE_RISING: + val = APLIC_SOURCECFG_SM_EDGE_RISE; + break; + default: + return -EINVAL; + } + + sourcecfg = priv->regs + APLIC_SOURCECFG_BASE; + sourcecfg += (d->hwirq - 1) * sizeof(u32); + writel(val, sourcecfg); + + return 0; +} + +static void aplic_irq_eoi(struct irq_data *d) +{ + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); + u32 reg_off, reg_mask; + + /* + * EOI handling only required only for level-triggered + * interrupts in APLIC MSI mode. + */ + + if (priv->nr_idcs) + return; + + reg_off = APLIC_CLRIP_BASE + ((d->hwirq / APLIC_IRQBITS_PER_REG) * 4); + reg_mask = BIT(d->hwirq % APLIC_IRQBITS_PER_REG); + switch (irqd_get_trigger_type(d)) { + case IRQ_TYPE_LEVEL_LOW: + if (!(readl(priv->regs + reg_off) & reg_mask)) + writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE); + break; + case IRQ_TYPE_LEVEL_HIGH: + if (readl(priv->regs + reg_off) & reg_mask) + writel(d->hwirq, priv->regs + APLIC_SETIPNUM_LE); + break; + } +} + +#ifdef CONFIG_SMP +static int aplic_set_affinity(struct irq_data *d, + const struct cpumask *mask_val, bool force) +{ + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); + struct aplic_idc *idc; + unsigned int cpu, val; + struct cpumask amask; + void __iomem *target; + + if (!priv->nr_idcs) + return irq_chip_set_affinity_parent(d, mask_val, force); + + cpumask_and(&amask, &priv->lmask, mask_val); + + if (force) + cpu = cpumask_first(&amask); + else + cpu = cpumask_any_and(&amask, cpu_online_mask); + + if (cpu >= nr_cpu_ids) + return -EINVAL; + + idc = per_cpu_ptr(&aplic_idcs, cpu); + target = priv->regs + APLIC_TARGET_BASE; + target += (d->hwirq - 1) * sizeof(u32); + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; + val <<= APLIC_TARGET_HART_IDX_SHIFT; + val |= APLIC_DEFAULT_PRIORITY; + writel(val, target); + + irq_data_update_effective_affinity(d, cpumask_of(cpu)); + + return IRQ_SET_MASK_OK_DONE; +} +#endif + +static struct irq_chip aplic_chip = { + .name = "RISC-V APLIC", + .irq_mask = aplic_irq_mask, + .irq_unmask = aplic_irq_unmask, + .irq_set_type = aplic_set_type, + .irq_eoi = aplic_irq_eoi, +#ifdef CONFIG_SMP + .irq_set_affinity = aplic_set_affinity, +#endif + .flags = IRQCHIP_SET_TYPE_MASKED | + IRQCHIP_SKIP_SET_WAKE | + IRQCHIP_MASK_ON_SUSPEND, +}; + +static int aplic_irqdomain_translate(struct irq_fwspec *fwspec, + u32 gsi_base, + unsigned long *hwirq, + unsigned int *type) +{ + if (WARN_ON(fwspec->param_count < 2)) + return -EINVAL; + if (WARN_ON(!fwspec->param[0])) + return -EINVAL; + + /* For DT, gsi_base is always zero. */ + *hwirq = fwspec->param[0] - gsi_base; + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; + + WARN_ON(*type == IRQ_TYPE_NONE); + + return 0; +} + +static int aplic_irqdomain_msi_translate(struct irq_domain *d, + struct irq_fwspec *fwspec, + unsigned long *hwirq, + unsigned int *type) +{ + struct aplic_priv *priv = platform_msi_get_host_data(d); + + return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type); +} + +static int aplic_irqdomain_msi_alloc(struct irq_domain *domain, + unsigned int virq, unsigned int nr_irqs, + void *arg) +{ + int i, ret; + unsigned int type; + irq_hw_number_t hwirq; + struct irq_fwspec *fwspec = arg; + struct aplic_priv *priv = platform_msi_get_host_data(domain); + + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type); + if (ret) + return ret; + + ret = platform_msi_device_domain_alloc(domain, virq, nr_irqs); + if (ret) + return ret; + + for (i = 0; i < nr_irqs; i++) { + irq_domain_set_info(domain, virq + i, hwirq + i, + &aplic_chip, priv, handle_fasteoi_irq, + NULL, NULL); + /* + * APLIC does not implement irq_disable() so Linux interrupt + * subsystem will take a lazy approach for disabling an APLIC + * interrupt. This means APLIC interrupts are left unmasked + * upon system suspend and interrupts are not processed + * immediately upon system wake up. To tackle this, we disable + * the lazy approach for all APLIC interrupts. + */ + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY); + } + + return 0; +} + +static const struct irq_domain_ops aplic_irqdomain_msi_ops = { + .translate = aplic_irqdomain_msi_translate, + .alloc = aplic_irqdomain_msi_alloc, + .free = platform_msi_device_domain_free, +}; + +static int aplic_irqdomain_idc_translate(struct irq_domain *d, + struct irq_fwspec *fwspec, + unsigned long *hwirq, + unsigned int *type) +{ + struct aplic_priv *priv = d->host_data; + + return aplic_irqdomain_translate(fwspec, priv->gsi_base, hwirq, type); +} + +static int aplic_irqdomain_idc_alloc(struct irq_domain *domain, + unsigned int virq, unsigned int nr_irqs, + void *arg) +{ + int i, ret; + unsigned int type; + irq_hw_number_t hwirq; + struct irq_fwspec *fwspec = arg; + struct aplic_priv *priv = domain->host_data; + + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, &hwirq, &type); + if (ret) + return ret; + + for (i = 0; i < nr_irqs; i++) { + irq_domain_set_info(domain, virq + i, hwirq + i, + &aplic_chip, priv, handle_fasteoi_irq, + NULL, NULL); + irq_set_affinity(virq + i, &priv->lmask); + /* See the reason described in aplic_irqdomain_msi_alloc() */ + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY); + } + + return 0; +} + +static const struct irq_domain_ops aplic_irqdomain_idc_ops = { + .translate = aplic_irqdomain_idc_translate, + .alloc = aplic_irqdomain_idc_alloc, + .free = irq_domain_free_irqs_top, +}; + +static void aplic_init_hw_irqs(struct aplic_priv *priv) +{ + int i; + + /* Disable all interrupts */ + for (i = 0; i <= priv->nr_irqs; i += 32) + writel(-1U, priv->regs + APLIC_CLRIE_BASE + + (i / 32) * sizeof(u32)); + + /* Set interrupt type and default priority for all interrupts */ + for (i = 1; i <= priv->nr_irqs; i++) { + writel(0, priv->regs + APLIC_SOURCECFG_BASE + + (i - 1) * sizeof(u32)); + writel(APLIC_DEFAULT_PRIORITY, + priv->regs + APLIC_TARGET_BASE + + (i - 1) * sizeof(u32)); + } + + /* Clear APLIC domaincfg */ + writel(0, priv->regs + APLIC_DOMAINCFG); +} + +static void aplic_init_hw_global(struct aplic_priv *priv) +{ + u32 val; +#ifdef CONFIG_RISCV_M_MODE + u32 valH; + + if (!priv->nr_idcs) { + val = priv->msicfg.base_ppn; + valH = (priv->msicfg.base_ppn >> 32) & + APLIC_xMSICFGADDRH_BAPPN_MASK; + valH |= (priv->msicfg.lhxw & APLIC_xMSICFGADDRH_LHXW_MASK) + << APLIC_xMSICFGADDRH_LHXW_SHIFT; + valH |= (priv->msicfg.hhxw & APLIC_xMSICFGADDRH_HHXW_MASK) + << APLIC_xMSICFGADDRH_HHXW_SHIFT; + valH |= (priv->msicfg.lhxs & APLIC_xMSICFGADDRH_LHXS_MASK) + << APLIC_xMSICFGADDRH_LHXS_SHIFT; + valH |= (priv->msicfg.hhxs & APLIC_xMSICFGADDRH_HHXS_MASK) + << APLIC_xMSICFGADDRH_HHXS_SHIFT; + writel(val, priv->regs + APLIC_xMSICFGADDR); + writel(valH, priv->regs + APLIC_xMSICFGADDRH); + } +#endif + + /* Setup APLIC domaincfg register */ + val = readl(priv->regs + APLIC_DOMAINCFG); + val |= APLIC_DOMAINCFG_IE; + if (!priv->nr_idcs) + val |= APLIC_DOMAINCFG_DM; + writel(val, priv->regs + APLIC_DOMAINCFG); + if (readl(priv->regs + APLIC_DOMAINCFG) != val) + pr_warn("%pfwP: unable to write 0x%x in domaincfg\n", + priv->fwnode, val); +} + +static void aplic_msi_write_msg(struct msi_desc *desc, struct msi_msg *msg) +{ + unsigned int group_index, hart_index, guest_index, val; + struct irq_data *d = irq_get_irq_data(desc->irq); + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); + struct aplic_msicfg *mc = &priv->msicfg; + phys_addr_t tppn, tbppn, msg_addr; + void __iomem *target; + + /* For zeroed MSI, simply write zero into the target register */ + if (!msg->address_hi && !msg->address_lo && !msg->data) { + target = priv->regs + APLIC_TARGET_BASE; + target += (d->hwirq - 1) * sizeof(u32); + writel(0, target); + return; + } + + /* Sanity check on message data */ + WARN_ON(msg->data > APLIC_TARGET_EIID_MASK); + + /* Compute target MSI address */ + msg_addr = (((u64)msg->address_hi) << 32) | msg->address_lo; + tppn = msg_addr >> APLIC_xMSICFGADDR_PPN_SHIFT; + + /* Compute target HART Base PPN */ + tbppn = tppn; + tbppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); + tbppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs); + tbppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs); + WARN_ON(tbppn != mc->base_ppn); + + /* Compute target group and hart indexes */ + group_index = (tppn >> APLIC_xMSICFGADDR_PPN_HHX_SHIFT(mc->hhxs)) & + APLIC_xMSICFGADDR_PPN_HHX_MASK(mc->hhxw); + hart_index = (tppn >> APLIC_xMSICFGADDR_PPN_LHX_SHIFT(mc->lhxs)) & + APLIC_xMSICFGADDR_PPN_LHX_MASK(mc->lhxw); + hart_index |= (group_index << mc->lhxw); + WARN_ON(hart_index > APLIC_TARGET_HART_IDX_MASK); + + /* Compute target guest index */ + guest_index = tppn & APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); + WARN_ON(guest_index > APLIC_TARGET_GUEST_IDX_MASK); + + /* Update IRQ TARGET register */ + target = priv->regs + APLIC_TARGET_BASE; + target += (d->hwirq - 1) * sizeof(u32); + val = (hart_index & APLIC_TARGET_HART_IDX_MASK) + << APLIC_TARGET_HART_IDX_SHIFT; + val |= (guest_index & APLIC_TARGET_GUEST_IDX_MASK) + << APLIC_TARGET_GUEST_IDX_SHIFT; + val |= (msg->data & APLIC_TARGET_EIID_MASK); + writel(val, target); +} + +static int aplic_setup_msi(struct aplic_priv *priv) +{ + struct aplic_msicfg *mc = &priv->msicfg; + const struct imsic_global_config *imsic_global; + + /* + * The APLIC outgoing MSI config registers assume target MSI + * controller to be RISC-V AIA IMSIC controller. + */ + imsic_global = imsic_get_global_config(); + if (!imsic_global) { + pr_err("%pfwP: IMSIC global config not found\n", + priv->fwnode); + return -ENODEV; + } + + /* Find number of guest index bits (LHXS) */ + mc->lhxs = imsic_global->guest_index_bits; + if (APLIC_xMSICFGADDRH_LHXS_MASK < mc->lhxs) { + pr_err("%pfwP: IMSIC guest index bits big for APLIC LHXS\n", + priv->fwnode); + return -EINVAL; + } + + /* Find number of HART index bits (LHXW) */ + mc->lhxw = imsic_global->hart_index_bits; + if (APLIC_xMSICFGADDRH_LHXW_MASK < mc->lhxw) { + pr_err("%pfwP: IMSIC hart index bits big for APLIC LHXW\n", + priv->fwnode); + return -EINVAL; + } + + /* Find number of group index bits (HHXW) */ + mc->hhxw = imsic_global->group_index_bits; + if (APLIC_xMSICFGADDRH_HHXW_MASK < mc->hhxw) { + pr_err("%pfwP: IMSIC group index bits big for APLIC HHXW\n", + priv->fwnode); + return -EINVAL; + } + + /* Find first bit position of group index (HHXS) */ + mc->hhxs = imsic_global->group_index_shift; + if (mc->hhxs < (2 * APLIC_xMSICFGADDR_PPN_SHIFT)) { + pr_err("%pfwP: IMSIC group index shift should be >= %d\n", + priv->fwnode, (2 * APLIC_xMSICFGADDR_PPN_SHIFT)); + return -EINVAL; + } + mc->hhxs -= (2 * APLIC_xMSICFGADDR_PPN_SHIFT); + if (APLIC_xMSICFGADDRH_HHXS_MASK < mc->hhxs) { + pr_err("%pfwP: IMSIC group index shift big for APLIC HHXS\n", + priv->fwnode); + return -EINVAL; + } + + /* Compute PPN base */ + mc->base_ppn = imsic_global->base_addr >> APLIC_xMSICFGADDR_PPN_SHIFT; + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HART(mc->lhxs); + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_LHX(mc->lhxw, mc->lhxs); + mc->base_ppn &= ~APLIC_xMSICFGADDR_PPN_HHX(mc->hhxw, mc->hhxs); + + /* Use all possible CPUs as lmask */ + cpumask_copy(&priv->lmask, cpu_possible_mask); + + return 0; +} + +/* + * To handle an APLIC IDC interrupts, we just read the CLAIMI register + * which will return highest priority pending interrupt and clear the + * pending bit of the interrupt. This process is repeated until CLAIMI + * register return zero value. + */ +static void aplic_idc_handle_irq(struct irq_desc *desc) +{ + struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs); + struct irq_chip *chip = irq_desc_get_chip(desc); + irq_hw_number_t hw_irq; + int irq; + + chained_irq_enter(chip, desc); + + while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) { + hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT; + irq = irq_find_mapping(idc->priv->irqdomain, hw_irq); + + if (unlikely(irq <= 0)) + pr_warn_ratelimited("hw_irq %lu mapping not found\n", + hw_irq); + else + generic_handle_irq(irq); + } + + chained_irq_exit(chip, desc); +} + +static void aplic_idc_set_delivery(struct aplic_idc *idc, bool en) +{ + u32 de = (en) ? APLIC_ENABLE_IDELIVERY : APLIC_DISABLE_IDELIVERY; + u32 th = (en) ? APLIC_ENABLE_ITHRESHOLD : APLIC_DISABLE_ITHRESHOLD; + + /* Priority must be less than threshold for interrupt triggering */ + writel(th, idc->regs + APLIC_IDC_ITHRESHOLD); + + /* Delivery must be set to 1 for interrupt triggering */ + writel(de, idc->regs + APLIC_IDC_IDELIVERY); +} + +static int aplic_idc_dying_cpu(unsigned int cpu) +{ + if (aplic_idc_parent_irq) + disable_percpu_irq(aplic_idc_parent_irq); + + return 0; +} + +static int aplic_idc_starting_cpu(unsigned int cpu) +{ + if (aplic_idc_parent_irq) + enable_percpu_irq(aplic_idc_parent_irq, + irq_get_trigger_type(aplic_idc_parent_irq)); + + return 0; +} + +static int aplic_setup_idc(struct aplic_priv *priv) +{ + int i, j, rc, cpu, setup_count = 0; + struct fwnode_reference_args parent; + struct irq_domain *domain; + unsigned long hartid; + struct aplic_idc *idc; + u32 val; + + /* Setup per-CPU IDC and target CPU mask */ + for (i = 0; i < priv->nr_idcs; i++) { + rc = fwnode_property_get_reference_args(priv->fwnode, + "interrupts-extended", "#interrupt-cells", + 0, i, &parent); + if (rc) { + pr_warn("%pfwP: parent irq for IDC%d not found\n", + priv->fwnode, i); + continue; + } + + /* + * Skip interrupts other than external interrupts for + * current privilege level. + */ + if (parent.args[0] != RV_IRQ_EXT) + continue; + + rc = riscv_fw_parent_hartid(parent.fwnode, &hartid); + if (rc) { + pr_warn("%pfwP: invalid hartid for IDC%d\n", + priv->fwnode, i); + continue; + } + + cpu = riscv_hartid_to_cpuid(hartid); + if (cpu < 0) { + pr_warn("%pfwP: invalid cpuid for IDC%d\n", + priv->fwnode, i); + continue; + } + + cpumask_set_cpu(cpu, &priv->lmask); + + idc = per_cpu_ptr(&aplic_idcs, cpu); + idc->hart_index = i; + idc->regs = priv->regs + APLIC_IDC_BASE + i * APLIC_IDC_SIZE; + idc->priv = priv; + + aplic_idc_set_delivery(idc, true); + + /* + * Boot cpu might not have APLIC hart_index = 0 so check + * and update target registers of all interrupts. + */ + if (cpu == smp_processor_id() && idc->hart_index) { + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; + val <<= APLIC_TARGET_HART_IDX_SHIFT; + val |= APLIC_DEFAULT_PRIORITY; + for (j = 1; j <= priv->nr_irqs; j++) + writel(val, priv->regs + APLIC_TARGET_BASE + + (j - 1) * sizeof(u32)); + } + + setup_count++; + } + + /* Find parent domain and register chained handler */ + domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), + DOMAIN_BUS_ANY); + if (!aplic_idc_parent_irq && domain) { + aplic_idc_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT); + if (aplic_idc_parent_irq) { + irq_set_chained_handler(aplic_idc_parent_irq, + aplic_idc_handle_irq); + + /* + * Setup CPUHP notifier to enable IDC parent + * interrupt on all CPUs + */ + cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, + "irqchip/riscv/aplic:starting", + aplic_idc_starting_cpu, + aplic_idc_dying_cpu); + } + } + + /* Fail if we were not able to setup IDC for any CPU */ + return (setup_count) ? 0 : -ENODEV; +} + +static int aplic_probe(struct platform_device *pdev) +{ + struct fwnode_handle *fwnode = pdev->dev.fwnode; + struct fwnode_reference_args parent; + struct aplic_priv *priv; + struct resource *res; + phys_addr_t pa; + int rc; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + priv->fwnode = fwnode; + + /* Map the MMIO registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + pr_err("%pfwP: failed to get MMIO resource\n", fwnode); + return -EINVAL; + } + priv->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!priv->regs) { + pr_err("%pfwP: failed map MMIO registers\n", fwnode); + return -ENOMEM; + } + + /* + * Find out GSI base number + * + * Note: DT does not define "riscv,gsi-base" property so GSI + * base is always zero for DT. + */ + rc = fwnode_property_read_u32_array(fwnode, "riscv,gsi-base", + &priv->gsi_base, 1); + if (rc) + priv->gsi_base = 0; + + /* Find out number of interrupt sources */ + rc = fwnode_property_read_u32_array(fwnode, "riscv,num-sources", + &priv->nr_irqs, 1); + if (rc) { + pr_err("%pfwP: failed to get number of interrupt sources\n", + fwnode); + return rc; + } + + /* Setup initial state APLIC interrupts */ + aplic_init_hw_irqs(priv); + + /* + * Find out number of IDCs based on parent interrupts + * + * If "msi-parent" property is present then we ignore the + * APLIC IDCs which forces the APLIC driver to use MSI mode. + */ + if (!fwnode_property_present(fwnode, "msi-parent")) { + while (!fwnode_property_get_reference_args(fwnode, + "interrupts-extended", "#interrupt-cells", + 0, priv->nr_idcs, &parent)) + priv->nr_idcs++; + } + + /* Setup IDCs or MSIs based on number of IDCs */ + if (priv->nr_idcs) + rc = aplic_setup_idc(priv); + else + rc = aplic_setup_msi(priv); + if (rc) { + pr_err("%pfwP: failed setup %s\n", + fwnode, priv->nr_idcs ? "IDCs" : "MSIs"); + return rc; + } + + /* Setup global config and interrupt delivery */ + aplic_init_hw_global(priv); + + /* Create irq domain instance for the APLIC */ + if (priv->nr_idcs) + priv->irqdomain = irq_domain_create_linear( + priv->fwnode, + priv->nr_irqs + 1, + &aplic_irqdomain_idc_ops, + priv); + else + priv->irqdomain = platform_msi_create_device_domain( + &pdev->dev, + priv->nr_irqs + 1, + aplic_msi_write_msg, + &aplic_irqdomain_msi_ops, + priv); + if (!priv->irqdomain) { + pr_err("%pfwP: failed to add irq domain\n", priv->fwnode); + return -ENOMEM; + } + + /* Advertise the interrupt controller */ + if (priv->nr_idcs) { + pr_info("%pfwP: %d interrupts directly connected to %d CPUs\n", + priv->fwnode, priv->nr_irqs, priv->nr_idcs); + } else { + pa = priv->msicfg.base_ppn << APLIC_xMSICFGADDR_PPN_SHIFT; + pr_info("%pfwP: %d interrupts forwared to MSI base %pa\n", + priv->fwnode, priv->nr_irqs, &pa); + } + + return 0; +} + +static const struct of_device_id aplic_match[] = { + { .compatible = "riscv,aplic" }, + {} +}; + +static struct platform_driver aplic_driver = { + .driver = { + .name = "riscv-aplic", + .of_match_table = aplic_match, + }, + .probe = aplic_probe, +}; +builtin_platform_driver(aplic_driver); + +static int __init aplic_dt_init(struct device_node *node, + struct device_node *parent) +{ + /* + * The APLIC platform driver needs to be probed early + * so for device tree: + * + * 1) Set the FWNODE_FLAG_BEST_EFFORT flag in fwnode which + * provides a hint to the device driver core to probe the + * platform driver early. + * 2) Clear the OF_POPULATED flag in device_node because + * of_irq_init() sets it which prevents creation of + * platform device. + */ + node->fwnode.flags |= FWNODE_FLAG_BEST_EFFORT; + of_node_clear_flag(node, OF_POPULATED); + return 0; +} +IRQCHIP_DECLARE(riscv_aplic, "riscv,aplic", aplic_dt_init); diff --git a/include/linux/irqchip/riscv-aplic.h b/include/linux/irqchip/riscv-aplic.h new file mode 100644 index 000000000000..97e198ea0109 --- /dev/null +++ b/include/linux/irqchip/riscv-aplic.h @@ -0,0 +1,119 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2021 Western Digital Corporation or its affiliates. + * Copyright (C) 2022 Ventana Micro Systems Inc. + */ +#ifndef __LINUX_IRQCHIP_RISCV_APLIC_H +#define __LINUX_IRQCHIP_RISCV_APLIC_H + +#include <linux/bitops.h> + +#define APLIC_MAX_IDC BIT(14) +#define APLIC_MAX_SOURCE 1024 + +#define APLIC_DOMAINCFG 0x0000 +#define APLIC_DOMAINCFG_RDONLY 0x80000000 +#define APLIC_DOMAINCFG_IE BIT(8) +#define APLIC_DOMAINCFG_DM BIT(2) +#define APLIC_DOMAINCFG_BE BIT(0) + +#define APLIC_SOURCECFG_BASE 0x0004 +#define APLIC_SOURCECFG_D BIT(10) +#define APLIC_SOURCECFG_CHILDIDX_MASK 0x000003ff +#define APLIC_SOURCECFG_SM_MASK 0x00000007 +#define APLIC_SOURCECFG_SM_INACTIVE 0x0 +#define APLIC_SOURCECFG_SM_DETACH 0x1 +#define APLIC_SOURCECFG_SM_EDGE_RISE 0x4 +#define APLIC_SOURCECFG_SM_EDGE_FALL 0x5 +#define APLIC_SOURCECFG_SM_LEVEL_HIGH 0x6 +#define APLIC_SOURCECFG_SM_LEVEL_LOW 0x7 + +#define APLIC_MMSICFGADDR 0x1bc0 +#define APLIC_MMSICFGADDRH 0x1bc4 +#define APLIC_SMSICFGADDR 0x1bc8 +#define APLIC_SMSICFGADDRH 0x1bcc + +#ifdef CONFIG_RISCV_M_MODE +#define APLIC_xMSICFGADDR APLIC_MMSICFGADDR +#define APLIC_xMSICFGADDRH APLIC_MMSICFGADDRH +#else +#define APLIC_xMSICFGADDR APLIC_SMSICFGADDR +#define APLIC_xMSICFGADDRH APLIC_SMSICFGADDRH +#endif + +#define APLIC_xMSICFGADDRH_L BIT(31) +#define APLIC_xMSICFGADDRH_HHXS_MASK 0x1f +#define APLIC_xMSICFGADDRH_HHXS_SHIFT 24 +#define APLIC_xMSICFGADDRH_LHXS_MASK 0x7 +#define APLIC_xMSICFGADDRH_LHXS_SHIFT 20 +#define APLIC_xMSICFGADDRH_HHXW_MASK 0x7 +#define APLIC_xMSICFGADDRH_HHXW_SHIFT 16 +#define APLIC_xMSICFGADDRH_LHXW_MASK 0xf +#define APLIC_xMSICFGADDRH_LHXW_SHIFT 12 +#define APLIC_xMSICFGADDRH_BAPPN_MASK 0xfff + +#define APLIC_xMSICFGADDR_PPN_SHIFT 12 + +#define APLIC_xMSICFGADDR_PPN_HART(__lhxs) \ + (BIT(__lhxs) - 1) + +#define APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) \ + (BIT(__lhxw) - 1) +#define APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs) \ + ((__lhxs)) +#define APLIC_xMSICFGADDR_PPN_LHX(__lhxw, __lhxs) \ + (APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) << \ + APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs)) + +#define APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) \ + (BIT(__hhxw) - 1) +#define APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs) \ + ((__hhxs) + APLIC_xMSICFGADDR_PPN_SHIFT) +#define APLIC_xMSICFGADDR_PPN_HHX(__hhxw, __hhxs) \ + (APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) << \ + APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs)) + +#define APLIC_IRQBITS_PER_REG 32 + +#define APLIC_SETIP_BASE 0x1c00 +#define APLIC_SETIPNUM 0x1cdc + +#define APLIC_CLRIP_BASE 0x1d00 +#define APLIC_CLRIPNUM 0x1ddc + +#define APLIC_SETIE_BASE 0x1e00 +#define APLIC_SETIENUM 0x1edc + +#define APLIC_CLRIE_BASE 0x1f00 +#define APLIC_CLRIENUM 0x1fdc + +#define APLIC_SETIPNUM_LE 0x2000 +#define APLIC_SETIPNUM_BE 0x2004 + +#define APLIC_GENMSI 0x3000 + +#define APLIC_TARGET_BASE 0x3004 +#define APLIC_TARGET_HART_IDX_SHIFT 18 +#define APLIC_TARGET_HART_IDX_MASK 0x3fff +#define APLIC_TARGET_GUEST_IDX_SHIFT 12 +#define APLIC_TARGET_GUEST_IDX_MASK 0x3f +#define APLIC_TARGET_IPRIO_MASK 0xff +#define APLIC_TARGET_EIID_MASK 0x7ff + +#define APLIC_IDC_BASE 0x4000 +#define APLIC_IDC_SIZE 32 + +#define APLIC_IDC_IDELIVERY 0x00 + +#define APLIC_IDC_IFORCE 0x04 + +#define APLIC_IDC_ITHRESHOLD 0x08 + +#define APLIC_IDC_TOPI 0x18 +#define APLIC_IDC_TOPI_ID_SHIFT 16 +#define APLIC_IDC_TOPI_ID_MASK 0x3ff +#define APLIC_IDC_TOPI_PRIO_MASK 0xff + +#define APLIC_IDC_CLAIMI 0x1c + +#endif
The RISC-V advanced interrupt architecture (AIA) specification defines a new interrupt controller for managing wired interrupts on a RISC-V platform. This new interrupt controller is referred to as advanced platform-level interrupt controller (APLIC) which can forward wired interrupts to CPUs (or HARTs) as local interrupts OR as message signaled interrupts. (For more details refer https://github.com/riscv/riscv-aia) This patch adds an irqchip driver for RISC-V APLIC found on RISC-V platforms. Signed-off-by: Anup Patel <apatel@ventanamicro.com> --- drivers/irqchip/Kconfig | 6 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-riscv-aplic.c | 765 ++++++++++++++++++++++++++++ include/linux/irqchip/riscv-aplic.h | 119 +++++ 4 files changed, 891 insertions(+) create mode 100644 drivers/irqchip/irq-riscv-aplic.c create mode 100644 include/linux/irqchip/riscv-aplic.h