diff mbox series

[RESEND] block: improve ioprio value validity checks

Message ID 20230608095556.124001-1-dlemoal@kernel.org
State New
Headers show
Series [RESEND] block: improve ioprio value validity checks | expand

Commit Message

Damien Le Moal June 8, 2023, 9:55 a.m. UTC
The introduction of the macro IOPRIO_PRIO_LEVEL() in commit
eca2040972b4 ("scsi: block: ioprio: Clean up interface definition")
results in an iopriority level to always be masked using the macro
IOPRIO_LEVEL_MASK, and thus to the kernel always seeing an acceptable
value for an I/O priority level when checked in ioprio_check_cap().
Before this patch, this function would return an error for some (but not
all) invalid values for a level valid range of [0..7].

Restore and improve the detection of invalid priority levels by
introducing the inline function ioprio_value() to check an ioprio class,
level and hint value before combining these fields into a single value
to be used with ioprio_set() or AIOs. If an invalid value for the class,
level or hint of an ioprio is detected, ioprio_value() returns an ioprio
using the class IOPRIO_CLASS_INVALID, indicating an invalid value and
causing ioprio_check_cap() to return -EINVAL.

Fixes: 6c913257226a ("scsi: block: Introduce ioprio hints")
Fixes: eca2040972b4 ("scsi: block: ioprio: Clean up interface definition")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
 block/ioprio.c              |  1 +
 include/uapi/linux/ioprio.h | 47 +++++++++++++++++++++++--------------
 2 files changed, 31 insertions(+), 17 deletions(-)

Comments

Linus Walleij June 9, 2023, 7:46 a.m. UTC | #1
On Thu, Jun 8, 2023 at 11:55 AM Damien Le Moal <dlemoal@kernel.org> wrote:

> The introduction of the macro IOPRIO_PRIO_LEVEL() in commit
> eca2040972b4 ("scsi: block: ioprio: Clean up interface definition")
> results in an iopriority level to always be masked using the macro
> IOPRIO_LEVEL_MASK, and thus to the kernel always seeing an acceptable
> value for an I/O priority level when checked in ioprio_check_cap().
> Before this patch, this function would return an error for some (but not
> all) invalid values for a level valid range of [0..7].
>
> Restore and improve the detection of invalid priority levels by
> introducing the inline function ioprio_value() to check an ioprio class,
> level and hint value before combining these fields into a single value
> to be used with ioprio_set() or AIOs. If an invalid value for the class,
> level or hint of an ioprio is detected, ioprio_value() returns an ioprio
> using the class IOPRIO_CLASS_INVALID, indicating an invalid value and
> causing ioprio_check_cap() to return -EINVAL.
>
> Fixes: 6c913257226a ("scsi: block: Introduce ioprio hints")
> Fixes: eca2040972b4 ("scsi: block: ioprio: Clean up interface definition")
> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

This makes it easier to get things right.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
Damien Le Moal June 12, 2023, 2:20 a.m. UTC | #2
On 6/9/23 16:46, Linus Walleij wrote:
> On Thu, Jun 8, 2023 at 11:55 AM Damien Le Moal <dlemoal@kernel.org> wrote:
> 
>> The introduction of the macro IOPRIO_PRIO_LEVEL() in commit
>> eca2040972b4 ("scsi: block: ioprio: Clean up interface definition")
>> results in an iopriority level to always be masked using the macro
>> IOPRIO_LEVEL_MASK, and thus to the kernel always seeing an acceptable
>> value for an I/O priority level when checked in ioprio_check_cap().
>> Before this patch, this function would return an error for some (but not
>> all) invalid values for a level valid range of [0..7].
>>
>> Restore and improve the detection of invalid priority levels by
>> introducing the inline function ioprio_value() to check an ioprio class,
>> level and hint value before combining these fields into a single value
>> to be used with ioprio_set() or AIOs. If an invalid value for the class,
>> level or hint of an ioprio is detected, ioprio_value() returns an ioprio
>> using the class IOPRIO_CLASS_INVALID, indicating an invalid value and
>> causing ioprio_check_cap() to return -EINVAL.
>>
>> Fixes: 6c913257226a ("scsi: block: Introduce ioprio hints")
>> Fixes: eca2040972b4 ("scsi: block: ioprio: Clean up interface definition")
>> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
> 
> This makes it easier to get things right.
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Thanks Linus !

Martin,

can you queue this please ?

> 
> Yours,
> Linus Walleij
Martin K. Petersen June 15, 2023, 1:27 a.m. UTC | #3
Damien,

> The introduction of the macro IOPRIO_PRIO_LEVEL() in commit
> eca2040972b4 ("scsi: block: ioprio: Clean up interface definition")
> results in an iopriority level to always be masked using the macro
> IOPRIO_LEVEL_MASK, and thus to the kernel always seeing an acceptable
> value for an I/O priority level when checked in ioprio_check_cap().
> Before this patch, this function would return an error for some (but
> not all) invalid values for a level valid range of [0..7].

Applied to 6.5/scsi-staging, thanks!
Martin K. Petersen June 22, 2023, 1:26 a.m. UTC | #4
On Thu, 08 Jun 2023 18:55:56 +0900, Damien Le Moal wrote:

> The introduction of the macro IOPRIO_PRIO_LEVEL() in commit
> eca2040972b4 ("scsi: block: ioprio: Clean up interface definition")
> results in an iopriority level to always be masked using the macro
> IOPRIO_LEVEL_MASK, and thus to the kernel always seeing an acceptable
> value for an I/O priority level when checked in ioprio_check_cap().
> Before this patch, this function would return an error for some (but not
> all) invalid values for a level valid range of [0..7].
> 
> [...]

Applied to 6.5/scsi-queue, thanks!

[1/1] block: improve ioprio value validity checks
      https://git.kernel.org/mkp/scsi/c/01584c1e2337
diff mbox series

Patch

diff --git a/block/ioprio.c b/block/ioprio.c
index f0d9e818abc5..b5a942519a79 100644
--- a/block/ioprio.c
+++ b/block/ioprio.c
@@ -58,6 +58,7 @@  int ioprio_check_cap(int ioprio)
 			if (level)
 				return -EINVAL;
 			break;
+		case IOPRIO_CLASS_INVALID:
 		default:
 			return -EINVAL;
 	}
diff --git a/include/uapi/linux/ioprio.h b/include/uapi/linux/ioprio.h
index 607c7617b9d2..7310449c0178 100644
--- a/include/uapi/linux/ioprio.h
+++ b/include/uapi/linux/ioprio.h
@@ -6,15 +6,13 @@ 
  * Gives us 8 prio classes with 13-bits of data for each class
  */
 #define IOPRIO_CLASS_SHIFT	13
-#define IOPRIO_CLASS_MASK	0x07
+#define IOPRIO_NR_CLASSES	8
+#define IOPRIO_CLASS_MASK	(IOPRIO_NR_CLASSES - 1)
 #define IOPRIO_PRIO_MASK	((1UL << IOPRIO_CLASS_SHIFT) - 1)
 
 #define IOPRIO_PRIO_CLASS(ioprio)	\
 	(((ioprio) >> IOPRIO_CLASS_SHIFT) & IOPRIO_CLASS_MASK)
 #define IOPRIO_PRIO_DATA(ioprio)	((ioprio) & IOPRIO_PRIO_MASK)
-#define IOPRIO_PRIO_VALUE(class, data)	\
-	((((class) & IOPRIO_CLASS_MASK) << IOPRIO_CLASS_SHIFT) | \
-	 ((data) & IOPRIO_PRIO_MASK))
 
 /*
  * These are the io priority classes as implemented by the BFQ and mq-deadline
@@ -25,10 +23,13 @@ 
  * served when no one else is using the disk.
  */
 enum {
-	IOPRIO_CLASS_NONE,
-	IOPRIO_CLASS_RT,
-	IOPRIO_CLASS_BE,
-	IOPRIO_CLASS_IDLE,
+	IOPRIO_CLASS_NONE	= 0,
+	IOPRIO_CLASS_RT		= 1,
+	IOPRIO_CLASS_BE		= 2,
+	IOPRIO_CLASS_IDLE	= 3,
+
+	/* Special class to indicate an invalid ioprio value */
+	IOPRIO_CLASS_INVALID	= 7,
 };
 
 /*
@@ -73,15 +74,6 @@  enum {
 #define IOPRIO_PRIO_HINT(ioprio)	\
 	(((ioprio) >> IOPRIO_HINT_SHIFT) & IOPRIO_HINT_MASK)
 
-/*
- * Alternate macro for IOPRIO_PRIO_VALUE() to define an IO priority with
- * a class, level and hint.
- */
-#define IOPRIO_PRIO_VALUE_HINT(class, level, hint)		 \
-	((((class) & IOPRIO_CLASS_MASK) << IOPRIO_CLASS_SHIFT) | \
-	 (((hint) & IOPRIO_HINT_MASK) << IOPRIO_HINT_SHIFT) |	 \
-	 ((level) & IOPRIO_LEVEL_MASK))
-
 /*
  * IO hints.
  */
@@ -107,4 +99,25 @@  enum {
 	IOPRIO_HINT_DEV_DURATION_LIMIT_7 = 7,
 };
 
+#define IOPRIO_BAD_VALUE(val, max) ((val) < 0 || (val) >= (max))
+
+/*
+ * Return an I/O priority value based on a class, a level and a hint.
+ */
+static __always_inline __u16 ioprio_value(int class, int level, int hint)
+{
+	if (IOPRIO_BAD_VALUE(class, IOPRIO_NR_CLASSES) ||
+	    IOPRIO_BAD_VALUE(level, IOPRIO_NR_LEVELS) ||
+	    IOPRIO_BAD_VALUE(hint, IOPRIO_NR_HINTS))
+		return IOPRIO_CLASS_INVALID << IOPRIO_CLASS_SHIFT;
+
+	return (class << IOPRIO_CLASS_SHIFT) |
+		(hint << IOPRIO_HINT_SHIFT) | level;
+}
+
+#define IOPRIO_PRIO_VALUE(class, level)			\
+	ioprio_value(class, level, IOPRIO_HINT_NONE)
+#define IOPRIO_PRIO_VALUE_HINT(class, level, hint)	\
+	ioprio_value(class, level, hint)
+
 #endif /* _UAPI_LINUX_IOPRIO_H */