@@ -1426,6 +1426,14 @@ Description: This entry shows the status of WriteBooster buffer flushing
If flushing is enabled, the device executes the flush
operation when the command queue is empty.
+What: /sys/bus/platform/drivers/ufshcd/*/wb_flush_threshold
+What: /sys/bus/platform/devices/*.ufs/wb_flush_threshold
+Date: June 2023
+Contact: Lu Hongfei <luhongfei@vivo.com>
+Description: wb_flush_threshold is a percentage that represents the threshold for flush WB.
+ When avail_wb_buff < wb_flush_threshold, the dev will flush WB when entered H8.
+ When avail_wb_buff >= wb_flush_threshold, it is not necessary.
+
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_version
What: /sys/bus/platform/devices/*.ufs/device_descriptor/hpb_version
Date: June 2021
@@ -298,6 +298,37 @@ static ssize_t enable_wb_buf_flush_store(struct device *dev,
return res < 0 ? res : count;
}
+static ssize_t wb_flush_threshold_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%u\n", hba->vps->wb_flush_threshold);
+}
+
+static ssize_t wb_flush_threshold_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ unsigned int wb_flush_threshold;
+
+ if (kstrtouint(buf, 0, &wb_flush_threshold))
+ return -EINVAL;
+
+ /* The range of values for wb_flush_threshold is (0,10] */
+ if (wb_flush_threshold > UFS_WB_BUF_REMAIN_PERCENT(100) ||
+ wb_flush_threshold == 0) {
+ dev_err(dev, "The value of wb_flush_threshold is invalid!\n");
+ return -EINVAL;
+ }
+
+ hba->vps->wb_flush_threshold = wb_flush_threshold;
+
+ return count;
+}
+
static DEVICE_ATTR_RW(rpm_lvl);
static DEVICE_ATTR_RO(rpm_target_dev_state);
static DEVICE_ATTR_RO(rpm_target_link_state);
@@ -307,6 +338,7 @@ static DEVICE_ATTR_RO(spm_target_link_state);
static DEVICE_ATTR_RW(auto_hibern8);
static DEVICE_ATTR_RW(wb_on);
static DEVICE_ATTR_RW(enable_wb_buf_flush);
+static DEVICE_ATTR_RW(wb_flush_threshold);
static struct attribute *ufs_sysfs_ufshcd_attrs[] = {
&dev_attr_rpm_lvl.attr,
@@ -318,6 +350,7 @@ static struct attribute *ufs_sysfs_ufshcd_attrs[] = {
&dev_attr_auto_hibern8.attr,
&dev_attr_wb_on.attr,
&dev_attr_enable_wb_buf_flush.attr,
+ &dev_attr_wb_flush_threshold.attr,
NULL
};
There are three flags that control Write Booster Feature: 1. WB ON/OFF 2. WB Hibern Flush ON/OFF (implicitly) 3. WB Flush ON/OFF (explicit) In the case of "Hibern Flush", one of the conditions for flush WB buffer is that avail_wb_buff < wb_flush_threshold. As we know, different users have different requirements for power consumption and performance. Therefore, we need the ability to manually set wb_flush_threshold, so that users can easily and flexibly adjust the wb_flush_threshold value, thereby achieving a balance between power consumption and performance. So the sysfs attribute that controls this is necessary. The meaning of wb_flush_threshold is the percentage of WB's total size, such as 1 representing 10%, 2 representing 20%, and so on. Signed-off-by: Lu Hongfei <luhongfei@vivo.com> --- The modifications made compared to the previous version are as follows: 1. Add wb_flush_threshold related information to sysfs documentation. Documentation/ABI/testing/sysfs-driver-ufs | 8 ++++++ drivers/ufs/core/ufs-sysfs.c | 33 ++++++++++++++++++++++ 2 files changed, 41 insertions(+)