| Message ID | 20230509204801.2824351-3-quic_eberman@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Drivers for Gunyah hypervisor | expand |
On 5/9/23 3:47 PM, Elliot Berman wrote: > Add architecture-independent standard error codes, types, and macros for > Gunyah hypercalls. > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> Looks OK to me. Reviewed-by: Alex Elder <elder@linaro.org> > --- > include/linux/gunyah.h | 83 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 83 insertions(+) > create mode 100644 include/linux/gunyah.h > > diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h > new file mode 100644 > index 000000000000..a4e8ec91961d > --- /dev/null > +++ b/include/linux/gunyah.h > @@ -0,0 +1,83 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#ifndef _LINUX_GUNYAH_H > +#define _LINUX_GUNYAH_H > + > +#include <linux/errno.h> > +#include <linux/limits.h> > + > +/******************************************************************************/ > +/* Common arch-independent definitions for Gunyah hypercalls */ > +#define GH_CAPID_INVAL U64_MAX > +#define GH_VMID_ROOT_VM 0xff > + > +enum gh_error { > + GH_ERROR_OK = 0, > + GH_ERROR_UNIMPLEMENTED = -1, > + GH_ERROR_RETRY = -2, I know you explained it "should be OK" to use a negative value (with unspecified bit width) here. I continue to feel it's not well-enough specified for an external API, but I'm going to try to just let it go. > + GH_ERROR_ARG_INVAL = 1, > + GH_ERROR_ARG_SIZE = 2, > + GH_ERROR_ARG_ALIGN = 3, > + > + GH_ERROR_NOMEM = 10, > + > + GH_ERROR_ADDR_OVFL = 20, > + GH_ERROR_ADDR_UNFL = 21, > + GH_ERROR_ADDR_INVAL = 22, > + > + GH_ERROR_DENIED = 30, > + GH_ERROR_BUSY = 31, > + GH_ERROR_IDLE = 32, > + > + GH_ERROR_IRQ_BOUND = 40, > + GH_ERROR_IRQ_UNBOUND = 41, > + > + GH_ERROR_CSPACE_CAP_NULL = 50, > + GH_ERROR_CSPACE_CAP_REVOKED = 51, > + GH_ERROR_CSPACE_WRONG_OBJ_TYPE = 52, > + GH_ERROR_CSPACE_INSUF_RIGHTS = 53, > + GH_ERROR_CSPACE_FULL = 54, > + > + GH_ERROR_MSGQUEUE_EMPTY = 60, > + GH_ERROR_MSGQUEUE_FULL = 61, > +}; > + > +/** > + * gh_error_remap() - Remap Gunyah hypervisor errors into a Linux error code > + * @gh_error: Gunyah hypercall return value > + */ > +static inline int gh_error_remap(enum gh_error gh_error) > +{ > + switch (gh_error) { > + case GH_ERROR_OK: > + return 0; > + case GH_ERROR_NOMEM: > + return -ENOMEM; > + case GH_ERROR_DENIED: > + case GH_ERROR_CSPACE_CAP_NULL: > + case GH_ERROR_CSPACE_CAP_REVOKED: > + case GH_ERROR_CSPACE_WRONG_OBJ_TYPE: > + case GH_ERROR_CSPACE_INSUF_RIGHTS: > + case GH_ERROR_CSPACE_FULL: > + return -EACCES; > + case GH_ERROR_BUSY: > + case GH_ERROR_IDLE: > + return -EBUSY; > + case GH_ERROR_IRQ_BOUND: > + case GH_ERROR_IRQ_UNBOUND: > + case GH_ERROR_MSGQUEUE_FULL: > + case GH_ERROR_MSGQUEUE_EMPTY: > + return -EIO; > + case GH_ERROR_UNIMPLEMENTED: > + case GH_ERROR_RETRY: > + return -EOPNOTSUPP; > + default: > + return -EINVAL; > + } > +} > + > +#endif
On 09/05/2023 21:47, Elliot Berman wrote: > Add architecture-independent standard error codes, types, and macros for > Gunyah hypercalls. > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> > --- lgtm, Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --srini > include/linux/gunyah.h | 83 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 83 insertions(+) > create mode 100644 include/linux/gunyah.h > > diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h > new file mode 100644 > index 000000000000..a4e8ec91961d > --- /dev/null > +++ b/include/linux/gunyah.h > @@ -0,0 +1,83 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +#ifndef _LINUX_GUNYAH_H > +#define _LINUX_GUNYAH_H > + > +#include <linux/errno.h> > +#include <linux/limits.h> > + > +/******************************************************************************/ > +/* Common arch-independent definitions for Gunyah hypercalls */ > +#define GH_CAPID_INVAL U64_MAX > +#define GH_VMID_ROOT_VM 0xff > + > +enum gh_error { > + GH_ERROR_OK = 0, > + GH_ERROR_UNIMPLEMENTED = -1, > + GH_ERROR_RETRY = -2, > + > + GH_ERROR_ARG_INVAL = 1, > + GH_ERROR_ARG_SIZE = 2, > + GH_ERROR_ARG_ALIGN = 3, > + > + GH_ERROR_NOMEM = 10, > + > + GH_ERROR_ADDR_OVFL = 20, > + GH_ERROR_ADDR_UNFL = 21, > + GH_ERROR_ADDR_INVAL = 22, > + > + GH_ERROR_DENIED = 30, > + GH_ERROR_BUSY = 31, > + GH_ERROR_IDLE = 32, > + > + GH_ERROR_IRQ_BOUND = 40, > + GH_ERROR_IRQ_UNBOUND = 41, > + > + GH_ERROR_CSPACE_CAP_NULL = 50, > + GH_ERROR_CSPACE_CAP_REVOKED = 51, > + GH_ERROR_CSPACE_WRONG_OBJ_TYPE = 52, > + GH_ERROR_CSPACE_INSUF_RIGHTS = 53, > + GH_ERROR_CSPACE_FULL = 54, > + > + GH_ERROR_MSGQUEUE_EMPTY = 60, > + GH_ERROR_MSGQUEUE_FULL = 61, > +}; > + > +/** > + * gh_error_remap() - Remap Gunyah hypervisor errors into a Linux error code > + * @gh_error: Gunyah hypercall return value > + */ > +static inline int gh_error_remap(enum gh_error gh_error) > +{ > + switch (gh_error) { > + case GH_ERROR_OK: > + return 0; > + case GH_ERROR_NOMEM: > + return -ENOMEM; > + case GH_ERROR_DENIED: > + case GH_ERROR_CSPACE_CAP_NULL: > + case GH_ERROR_CSPACE_CAP_REVOKED: > + case GH_ERROR_CSPACE_WRONG_OBJ_TYPE: > + case GH_ERROR_CSPACE_INSUF_RIGHTS: > + case GH_ERROR_CSPACE_FULL: > + return -EACCES; > + case GH_ERROR_BUSY: > + case GH_ERROR_IDLE: > + return -EBUSY; > + case GH_ERROR_IRQ_BOUND: > + case GH_ERROR_IRQ_UNBOUND: > + case GH_ERROR_MSGQUEUE_FULL: > + case GH_ERROR_MSGQUEUE_EMPTY: > + return -EIO; > + case GH_ERROR_UNIMPLEMENTED: > + case GH_ERROR_RETRY: > + return -EOPNOTSUPP; > + default: > + return -EINVAL; > + } > +} > + > +#endif
diff --git a/include/linux/gunyah.h b/include/linux/gunyah.h new file mode 100644 index 000000000000..a4e8ec91961d --- /dev/null +++ b/include/linux/gunyah.h @@ -0,0 +1,83 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _LINUX_GUNYAH_H +#define _LINUX_GUNYAH_H + +#include <linux/errno.h> +#include <linux/limits.h> + +/******************************************************************************/ +/* Common arch-independent definitions for Gunyah hypercalls */ +#define GH_CAPID_INVAL U64_MAX +#define GH_VMID_ROOT_VM 0xff + +enum gh_error { + GH_ERROR_OK = 0, + GH_ERROR_UNIMPLEMENTED = -1, + GH_ERROR_RETRY = -2, + + GH_ERROR_ARG_INVAL = 1, + GH_ERROR_ARG_SIZE = 2, + GH_ERROR_ARG_ALIGN = 3, + + GH_ERROR_NOMEM = 10, + + GH_ERROR_ADDR_OVFL = 20, + GH_ERROR_ADDR_UNFL = 21, + GH_ERROR_ADDR_INVAL = 22, + + GH_ERROR_DENIED = 30, + GH_ERROR_BUSY = 31, + GH_ERROR_IDLE = 32, + + GH_ERROR_IRQ_BOUND = 40, + GH_ERROR_IRQ_UNBOUND = 41, + + GH_ERROR_CSPACE_CAP_NULL = 50, + GH_ERROR_CSPACE_CAP_REVOKED = 51, + GH_ERROR_CSPACE_WRONG_OBJ_TYPE = 52, + GH_ERROR_CSPACE_INSUF_RIGHTS = 53, + GH_ERROR_CSPACE_FULL = 54, + + GH_ERROR_MSGQUEUE_EMPTY = 60, + GH_ERROR_MSGQUEUE_FULL = 61, +}; + +/** + * gh_error_remap() - Remap Gunyah hypervisor errors into a Linux error code + * @gh_error: Gunyah hypercall return value + */ +static inline int gh_error_remap(enum gh_error gh_error) +{ + switch (gh_error) { + case GH_ERROR_OK: + return 0; + case GH_ERROR_NOMEM: + return -ENOMEM; + case GH_ERROR_DENIED: + case GH_ERROR_CSPACE_CAP_NULL: + case GH_ERROR_CSPACE_CAP_REVOKED: + case GH_ERROR_CSPACE_WRONG_OBJ_TYPE: + case GH_ERROR_CSPACE_INSUF_RIGHTS: + case GH_ERROR_CSPACE_FULL: + return -EACCES; + case GH_ERROR_BUSY: + case GH_ERROR_IDLE: + return -EBUSY; + case GH_ERROR_IRQ_BOUND: + case GH_ERROR_IRQ_UNBOUND: + case GH_ERROR_MSGQUEUE_FULL: + case GH_ERROR_MSGQUEUE_EMPTY: + return -EIO; + case GH_ERROR_UNIMPLEMENTED: + case GH_ERROR_RETRY: + return -EOPNOTSUPP; + default: + return -EINVAL; + } +} + +#endif