mbox series

[v3,0/2] Extend dt-bindings for PSE-PD controllers and update prtt1c dts

Message ID 20230531102113.3353065-1-o.rempel@pengutronix.de
Headers show
Series Extend dt-bindings for PSE-PD controllers and update prtt1c dts | expand

Message

Oleksij Rempel May 31, 2023, 10:21 a.m. UTC 
changes v3:
- reword commit message for the pse-controller.yaml patch
- drop podl-pse-regulator.yaml patch

changes v2:
- extend ethernet-pse regexp in the PoDL PSE dt-bindings

This patch set comes in response to issues identified while adding PoDL
PSE support to the stm32 prtt1c device tree. The existing pse-pd device
tree bindings did not allow node name patterns like "ethernet-pse-0" and
"ethernet-pse-1", leading to validation failures.

To address these false positives in validation, the device tree bindings
are extended to support these node name patterns. Alongside this, an
example node is added to aid in the improved validation process.
Following these changes, the updated PoDL PSE regulator nodes are then
added to the stm32 prtt1c device tree.

Oleksij Rempel (2):
  dt-bindings: net: pse-pd: Allow -N suffix for ethernet-pse node names
  ARM: dts: stm32: prtt1c: Add PoDL PSE regulator nodes

 .../bindings/net/pse-pd/pse-controller.yaml   |  2 +-
 arch/arm/boot/dts/stm32mp151a-prtt1c.dts      | 32 +++++++++++++++++++
 2 files changed, 33 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski June 1, 2023, 5:34 p.m. UTC | #1 
On 31/05/2023 12:21, Oleksij Rempel wrote:
> Extend the pattern matching for PSE-PD controller nodes to allow -N
> suffixes. This enables the use of multiple "ethernet-pse" nodes without the
> need for a "reg" property.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
patchwork-bot+netdevbpf@kernel.org June 2, 2023, 5 a.m. UTC | #2 
Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Wed, 31 May 2023 12:21:11 +0200 you wrote:
> changes v3:
> - reword commit message for the pse-controller.yaml patch
> - drop podl-pse-regulator.yaml patch
> 
> changes v2:
> - extend ethernet-pse regexp in the PoDL PSE dt-bindings
> 
> [...]

Here is the summary with links:
  - [v3,1/2] dt-bindings: net: pse-pd: Allow -N suffix for ethernet-pse node names
    https://git.kernel.org/netdev/net-next/c/bd415f6c748e
  - [v3,2/2] ARM: dts: stm32: prtt1c: Add PoDL PSE regulator nodes
    (no matching commit)

You are awesome, thank you!