| Message ID | 20230418095734.669858-1-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | 4c8bb2d567588ccbfbf374c079f291a1402c4454 |
| Headers | show |
| Series | arm64: dts: qcom: sm8550: use uint16 for Soundwire interval | expand |
On 18.04.2023 11:57, Krzysztof Kozlowski wrote: > The Soundwire bindings changed during review, after the SM8550 DTS > Soundwire nodes were merged. Switch to uint16 for Soundwire > qcom,ports-sinterval property, to match with current bindings. > > Fixes: 61b006389bb7 ("arm64: dts: qcom: sm8550: add Soundwire controllers") > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > > Fix for v6.4-rc1. > > Bindings v3 (with uint16): > https://lore.kernel.org/linux-arm-msm/20230418095447.577001-1-krzysztof.kozlowski@linaro.org/T/#md34302ec02eebdbe3e4defef79a40b32a7e621b8 > --- > arch/arm64/boot/dts/qcom/sm8550.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi > index 6e9bad8f6f33..80a01ff3ee30 100644 > --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi > @@ -2022,7 +2022,7 @@ swr3: soundwire-controller@6ab0000 { > qcom,din-ports = <4>; > qcom,dout-ports = <9>; > > - qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; > + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; > qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; > qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; > @@ -2068,7 +2068,7 @@ swr1: soundwire-controller@6ad0000 { > qcom,din-ports = <0>; > qcom,dout-ports = <10>; > > - qcom,ports-sinterval = <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>; > + qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>; > qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>; > qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; > qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; > @@ -2133,7 +2133,7 @@ swr0: soundwire-controller@6b10000 { > qcom,din-ports = <4>; > qcom,dout-ports = <9>; > > - qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; > + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; > qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; > qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; > qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
On Tue, 18 Apr 2023 11:57:34 +0200, Krzysztof Kozlowski wrote: > The Soundwire bindings changed during review, after the SM8550 DTS > Soundwire nodes were merged. Switch to uint16 for Soundwire > qcom,ports-sinterval property, to match with current bindings. > > Applied, thanks! [1/1] arm64: dts: qcom: sm8550: use uint16 for Soundwire interval commit: 4c8bb2d567588ccbfbf374c079f291a1402c4454 Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 6e9bad8f6f33..80a01ff3ee30 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -2022,7 +2022,7 @@ swr3: soundwire-controller@6ab0000 { qcom,din-ports = <4>; qcom,dout-ports = <9>; - qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; @@ -2068,7 +2068,7 @@ swr1: soundwire-controller@6ad0000 { qcom,din-ports = <0>; qcom,dout-ports = <10>; - qcom,ports-sinterval = <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>; + qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>; qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>; qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; @@ -2133,7 +2133,7 @@ swr0: soundwire-controller@6b10000 { qcom,din-ports = <4>; qcom,dout-ports = <9>; - qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
The Soundwire bindings changed during review, after the SM8550 DTS Soundwire nodes were merged. Switch to uint16 for Soundwire qcom,ports-sinterval property, to match with current bindings. Fixes: 61b006389bb7 ("arm64: dts: qcom: sm8550: add Soundwire controllers") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Fix for v6.4-rc1. Bindings v3 (with uint16): https://lore.kernel.org/linux-arm-msm/20230418095447.577001-1-krzysztof.kozlowski@linaro.org/T/#md34302ec02eebdbe3e4defef79a40b32a7e621b8 --- arch/arm64/boot/dts/qcom/sm8550.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)