diff mbox series

ARM: dts: ste: align UART node name with bindings

Message ID 20230123151519.369158-1-krzysztof.kozlowski@linaro.org
State Accepted
Commit cc386f5c670d58fbc41dc7ee8f2281aa74b58f9e
Headers show
Series ARM: dts: ste: align UART node name with bindings | expand

Commit Message

Krzysztof Kozlowski Jan. 23, 2023, 3:15 p.m. UTC 
Bindings expect UART/serial node names to be "serial".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi                  | 6 +++---
 arch/arm/boot/dts/ste-href.dtsi                    | 6 +++---
 arch/arm/boot/dts/ste-hrefprev60.dtsi              | 2 +-
 arch/arm/boot/dts/ste-nomadik-nhk15.dts            | 2 +-
 arch/arm/boot/dts/ste-nomadik-s8815.dts            | 2 +-
 arch/arm/boot/dts/ste-nomadik-stn8815.dtsi         | 6 +++---
 arch/arm/boot/dts/ste-snowball.dts                 | 6 +++---
 arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts | 6 +++---
 arch/arm/boot/dts/ste-ux500-samsung-codina.dts     | 6 +++---
 arch/arm/boot/dts/ste-ux500-samsung-gavini.dts     | 6 +++---
 arch/arm/boot/dts/ste-ux500-samsung-golden.dts     | 6 +++---
 arch/arm/boot/dts/ste-ux500-samsung-janice.dts     | 6 +++---
 arch/arm/boot/dts/ste-ux500-samsung-kyle.dts       | 6 +++---
 arch/arm/boot/dts/ste-ux500-samsung-skomer.dts     | 6 +++---
 14 files changed, 36 insertions(+), 36 deletions(-)

Comments

Linus Walleij Jan. 27, 2023, 8:37 a.m. UTC | #1 
On Mon, Jan 23, 2023 at 4:15 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:

> Bindings expect UART/serial node names to be "serial".
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Patch applied to the ux500 tree!

Yours,
Linus Walleij
Krzysztof Kozlowski May 11, 2023, 12:43 p.m. UTC | #2 
On Mon, 23 Jan 2023 16:15:18 +0100, Krzysztof Kozlowski wrote:
> Bindings expect UART/serial node names to be "serial".
> 
> 

Applied, thanks!

[1/1] ARM: dts: ste: align UART node name with bindings
      https://git.kernel.org/krzk/linux-dt/c/cc386f5c670d58fbc41dc7ee8f2281aa74b58f9e

Best regards,
Linus Walleij May 11, 2023, 1:38 p.m. UTC | #3 
On Thu, May 11, 2023 at 2:44 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
> On Mon, 23 Jan 2023 16:15:18 +0100, Krzysztof Kozlowski wrote:
> > Bindings expect UART/serial node names to be "serial".
> >
> >
>
> Applied, thanks!

Sorry for missing to send a pull request for this for v6.4 :(

I actually have it in my tree (along with some other stuff)
and was planning to push it upstream, but this works too.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index a42a4fd69299..ecfaf5a70403 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -846,7 +846,7 @@  spi3: spi@80129000 {
 			status = "disabled";
 		};
 
-		serial0: uart@80120000 {
+		serial0: serial@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -862,7 +862,7 @@  serial0: uart@80120000 {
 			status = "disabled";
 		};
 
-		serial1: uart@80121000 {
+		serial1: serial@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
 			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -878,7 +878,7 @@  serial1: uart@80121000 {
 			status = "disabled";
 		};
 
-		serial2: uart@80007000 {
+		serial2: serial@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 8f1bb78fc1e4..2def50da9eb6 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -45,7 +45,7 @@  bat_therm: thermistor {
 	};
 
 	soc {
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -53,13 +53,13 @@  uart@80120000 {
 		};
 
 		/* This UART is unused and thus left disabled */
-		uart@80121000 {
+		serial@80121000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default>;
 			pinctrl-1 = <&u1rxtx_a_1_sleep>;
 		};
 
-		uart@80007000 {
+		serial@80007000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
 			pinctrl-1 = <&u2rxtx_c_1_sleep>;
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 29b67abfc461..9859ee91a15e 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -17,7 +17,7 @@  button@1 {
 
 	soc {
 		/* Enable UART1 on this board */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
index 8142c017882c..d4bbe9729ced 100644
--- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -190,7 +190,7 @@  nomadik_clcd: endpoint {
 		};
 
 		/* Activate RX/TX and CTS/RTS on UART 0 */
-		uart0: uart@101fd000 {
+		uart0: serial@101fd000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_nhk_mode>;
 			status = "okay";
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index f16314ffbf4b..c905c2643a12 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -133,7 +133,7 @@  stw4811@2d {
 
 	amba {
 		/* Activate RXTX on UART 0 */
-		uart0: uart@101fd000 {
+		uart0: serial@101fd000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_s8815_mode>;
 			status = "okay";
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 1815361fe73c..6816eef39d45 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -769,7 +769,7 @@  vicb: interrupt-controller@10140020 {
 			reg = <0x10140020 0x20>;
 		};
 
-		uart0: uart@101fd000 {
+		uart0: serial@101fd000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101fd000 0x1000>;
 			interrupt-parent = <&vica>;
@@ -782,7 +782,7 @@  uart0: uart@101fd000 {
 			dma-names = "rx", "tx";
 		};
 
-		uart1: uart@101fb000 {
+		uart1: serial@101fb000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101fb000 0x1000>;
 			interrupt-parent = <&vica>;
@@ -796,7 +796,7 @@  uart1: uart@101fb000 {
 			dma-names = "rx", "tx";
 		};
 
-		uart2: uart@101f2000 {
+		uart2: serial@101f2000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f2000 0x1000>;
 			interrupt-parent = <&vica>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index e2f0cdacba7d..9a3d6546399d 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -308,7 +308,7 @@  mmc@80114000 {
 			status = "okay";
 		};
 
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -316,13 +316,13 @@  uart@80120000 {
 		};
 
 		/* This UART is unused and thus left disabled */
-		uart@80121000 {
+		serial@80121000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default>;
 			pinctrl-1 = <&u1rxtx_a_1_sleep>;
 		};
 
-		uart@80007000 {
+		serial@80007000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
 			pinctrl-1 = <&u2rxtx_c_1_sleep>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
index e036393d5415..463942ae755e 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
@@ -369,7 +369,7 @@  mmc@80005000 {
 		};
 
 		/* GBF (Bluetooth) UART */
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -393,7 +393,7 @@  bluetooth {
 		};
 
 		/* GPS UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			/* CTS/RTS is not used, CTS is repurposed as GPIO */
@@ -403,7 +403,7 @@  uart@80121000 {
 		};
 
 		/* Debugging console UART connected to AB8505 */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index 1a6d24a7ccb8..c1ae0e23fe45 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -462,7 +462,7 @@  mmc@80005000 {
 		};
 
 		/* GBF (Bluetooth) UART */
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -485,7 +485,7 @@  bluetooth {
 		};
 
 		/* GPS UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
@@ -505,7 +505,7 @@  gnss {
 		};
 
 		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
index 5b445fa4c8c0..b21e40da3dfd 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -417,7 +417,7 @@  mmc@80005000 {
 		};
 
 		/* GBF (Bluetooth) UART */
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -439,7 +439,7 @@  bluetooth {
 		};
 
 		/* GPS UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			/* CTS/RTS is not used, CTS is repurposed as GPIO */
@@ -449,7 +449,7 @@  uart@80121000 {
 		};
 
 		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index 9604695edf53..f736888474e7 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -186,7 +186,7 @@  mmc@80005000 {
 		};
 
 		/* BT UART */
-		uart@80120000 {
+		serial@80120000 {
 			status = "okay";
 
 			pinctrl-names = "default", "sleep";
@@ -209,7 +209,7 @@  bluetooth {
 		};
 
 		/* GPF UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 
 			pinctrl-names = "default", "sleep";
@@ -218,7 +218,7 @@  uart@80121000 {
 		};
 
 		/* Debugging console UART */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 
 			pinctrl-names = "default", "sleep";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index e901cb76b899..6e586e875565 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -467,7 +467,7 @@  mmc@80005000 {
 		};
 
 		/* GBF (Bluetooth) UART */
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -491,7 +491,7 @@  bluetooth {
 		};
 
 		/* GPS UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			/* CTS/RTS is not used, CTS is repurposed as GPIO */
@@ -520,7 +520,7 @@  gnss {
 		};
 
 		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
index 45fab5283a9d..ba4421080b2a 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
@@ -292,7 +292,7 @@  mmc@80005000 {
 		};
 
 		/* GBF (Bluetooth) UART */
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -310,7 +310,7 @@  bluetooth {
 		};
 
 		/* GPF UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
@@ -333,7 +333,7 @@  gnss {
 		};
 
 		/* Debugging console UART connected to AB8505 USB */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 93e5f5ed888d..064d6fee8821 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -271,7 +271,7 @@  mmc@80005000 {
 		};
 
 		/* GBF (Bluetooth) UART */
-		uart@80120000 {
+		serial@80120000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u0_a_1_default>;
 			pinctrl-1 = <&u0_a_1_sleep>;
@@ -290,7 +290,7 @@  bluetooth {
 		};
 
 		/* GPS UART */
-		uart@80121000 {
+		serial@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
@@ -313,7 +313,7 @@  gnss {
 		};
 
 		/* Debugging console UART connected to AB8505 USB */
-		uart@80007000 {
+		serial@80007000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u2rxtx_c_1_default>;