| Message ID | 20230501143445.3851-1-quic_kriskura@quicinc.com |
|---|---|
| Headers | show |
| Series | Add multiport support for DWC3 controllers | expand |
On 5/2/2023 1:18 PM, Krzysztof Kozlowski wrote: > On 01/05/2023 16:34, Krishna Kurapati wrote: >> Add the compatible string for SC8280 Multiport USB controller from >> Qualcomm. >> >> There are 4 power event irq interrupts supported by this controller >> (one for each port of multiport). Added all the 4 as non-optional >> interrupts for SC8280XP-MP >> >> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> >> --- >> .../devicetree/bindings/usb/qcom,dwc3.yaml | 21 +++++++++++++++++++ >> 1 file changed, 21 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml >> index d84281926f10..2c96da1ce5b8 100644 >> --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml >> +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml >> @@ -26,6 +26,7 @@ properties: >> - qcom,sc7180-dwc3 >> - qcom,sc7280-dwc3 >> - qcom,sc8280xp-dwc3 >> + - qcom,sc8280xp-dwc3-mp > > SC8280xp comes with two USB controllers: one single-port and one multi-port? Hi Krzysztof, SC8280XP comes with 3 controllers. The first two are single port controller and the third one is a multiport controller. In DTSI: usb_0 / usb1: have compatible set to : "qcom,sc8280xp-dwc3" And multiport controller has it set to "qcom,sc8280xp-dwc3-mp" >> - qcom,sdm660-dwc3 >> - qcom,sdm670-dwc3 >> - qcom,sdm845-dwc3 >> @@ -455,6 +456,26 @@ allOf: >> - const: dm_hs_phy_irq >> - const: ss_phy_irq >> >> + - if: >> + properties: >> + compatible: >> + contains: >> + enum: >> + - qcom,sc8280xp-dwc3-mp > > You miss entries for all other constraints. > Let me add the clock properties as well. Regards, Krishna,
On 02/05/2023 10:35, Krishna Kurapati PSSNV wrote: > > > On 5/2/2023 1:18 PM, Krzysztof Kozlowski wrote: >> On 01/05/2023 16:34, Krishna Kurapati wrote: >>> Add the compatible string for SC8280 Multiport USB controller from >>> Qualcomm. >>> >>> There are 4 power event irq interrupts supported by this controller >>> (one for each port of multiport). Added all the 4 as non-optional >>> interrupts for SC8280XP-MP >>> >>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> >>> --- >>> .../devicetree/bindings/usb/qcom,dwc3.yaml | 21 +++++++++++++++++++ >>> 1 file changed, 21 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml >>> index d84281926f10..2c96da1ce5b8 100644 >>> --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml >>> +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml >>> @@ -26,6 +26,7 @@ properties: >>> - qcom,sc7180-dwc3 >>> - qcom,sc7280-dwc3 >>> - qcom,sc8280xp-dwc3 >>> + - qcom,sc8280xp-dwc3-mp >> >> SC8280xp comes with two USB controllers: one single-port and one multi-port? > > Hi Krzysztof, > > SC8280XP comes with 3 controllers. The first two are single port > controller and the third one is a multiport controller. In DTSI: > usb_0 / usb1: have compatible set to : "qcom,sc8280xp-dwc3" > > And multiport controller has it set to "qcom,sc8280xp-dwc3-mp" OK, then this looks fine. Please add the compatible to existing allOf:if:then to constrain clocks and other pieces. If none of existing if:then: matches your case, add new one. Best regards, Krzysztof
On 5/2/2023 2:17 PM, Krzysztof Kozlowski wrote: > On 02/05/2023 10:35, Krishna Kurapati PSSNV wrote: >> >> >> On 5/2/2023 1:18 PM, Krzysztof Kozlowski wrote: >>> On 01/05/2023 16:34, Krishna Kurapati wrote: >>>> Add the compatible string for SC8280 Multiport USB controller from >>>> Qualcomm. >>>> >>>> There are 4 power event irq interrupts supported by this controller >>>> (one for each port of multiport). Added all the 4 as non-optional >>>> interrupts for SC8280XP-MP >>>> >>>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> >>>> --- >>>> .../devicetree/bindings/usb/qcom,dwc3.yaml | 21 +++++++++++++++++++ >>>> 1 file changed, 21 insertions(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml >>>> index d84281926f10..2c96da1ce5b8 100644 >>>> --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml >>>> +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml >>>> @@ -26,6 +26,7 @@ properties: >>>> - qcom,sc7180-dwc3 >>>> - qcom,sc7280-dwc3 >>>> - qcom,sc8280xp-dwc3 >>>> + - qcom,sc8280xp-dwc3-mp >>> >>> SC8280xp comes with two USB controllers: one single-port and one multi-port? >> >> Hi Krzysztof, >> >> SC8280XP comes with 3 controllers. The first two are single port >> controller and the third one is a multiport controller. In DTSI: >> usb_0 / usb1: have compatible set to : "qcom,sc8280xp-dwc3" >> >> And multiport controller has it set to "qcom,sc8280xp-dwc3-mp" > > OK, then this looks fine. > > Please add the compatible to existing allOf:if:then to constrain clocks > and other pieces. If none of existing if:then: matches your case, add > new one. > > Best regards, > Krzysztof > Thanks Krzysztof. One query: Clocks are same for both single/multiport controllers. Would the following be fine ? diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 2c96da1ce5b8..c0f4745febf0 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -263,6 +263,7 @@ allOf: contains: enum: - qcom,sc8280xp-dwc3 + - qcom,sc8280xp-dwc3-mp then: properties: clocks: Regards, Krishna,
On 02/05/2023 10:52, Krishna Kurapati PSSNV wrote: >> Best regards, >> Krzysztof >> > > Thanks Krzysztof. One query: > > Clocks are same for both single/multiport controllers. Would the > following be fine ? > Yes, thanks. Best regards, Krzysztof
On 1.05.2023 16:34, Krishna Kurapati wrote: > Enable tertiary controller for SA8295P (based on SC8280XP). > Add pinctrl support for usb ports to provide VBUS to connected peripherals. > > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 47 ++++++++++++++++++++++++ > 1 file changed, 47 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts > index fd253942e5e5..7e6061c43835 100644 > --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts > +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts > @@ -584,6 +584,19 @@ &usb_1_qmpphy { > status = "okay"; > }; > > +&usb_2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb2_en_state>, > + <&usb3_en_state>, > + <&usb4_en_state>, > + <&usb5_en_state>; This is misaligned. Also, please do property-n before property-names. > + status = "okay"; > +}; > + > +&usb_2_dwc3 { > + dr_mode = "host"; > +}; > + > &usb_2_hsphy0 { > vdda-pll-supply = <&vreg_l5a>; > vdda18-supply = <&vreg_l7g>; > @@ -729,3 +742,37 @@ wake-n-pins { > }; > }; > }; > + > +&pmm8540c_gpios { > + usb2_en_state: usb2-en-state { > + pins = "gpio9"; > + function = "normal"; > + output-high; > + power-source = <0>; No drive-strength values? Konrad > + }; > +}; > + > +&pmm8540e_gpios { > + usb3_en_state: usb3-en-state { > + pins = "gpio5"; > + function = "normal"; > + output-high; > + power-source = <0>; > + }; > +}; > + > +&pmm8540g_gpios { > + usb4_en_state: usb4-en-state { > + pins = "gpio5"; > + function = "normal"; > + output-high; > + power-source = <0>; > + }; > + > + usb5_en_state: usb5-en-state { > + pins = "gpio9"; > + function = "normal"; > + output-high; > + power-source = <0>; > + }; > +};
On Mon, May 01, 2023, Krishna Kurapati wrote: > Currently the DWC3 driver supports only single port controller > which requires at most one HS and one SS PHY. > > But the DWC3 USB controller can be connected to multiple ports and > each port can have their own PHYs. Each port of the multiport > controller can either be HS+SS capable or HS only capable > Proper quantification of them is required to modify GUSB2PHYCFG > and GUSB3PIPECTL registers appropriately. > > Add support for detecting, obtaining and configuring phy's supported > by a multiport controller and limit the max number of ports > supported to 4. > > Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com> > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Are you a co-author or only Harsh is the main author of this patch? > --- > drivers/usb/dwc3/core.c | 262 +++++++++++++++++++++++++++++----------- > drivers/usb/dwc3/core.h | 12 +- > drivers/usb/dwc3/drd.c | 13 +- > 3 files changed, 209 insertions(+), 78 deletions(-) > > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c > index 8625fc5c7ab4..b91c3f965abc 100644 > --- a/drivers/usb/dwc3/core.c > +++ b/drivers/usb/dwc3/core.c > @@ -121,6 +121,7 @@ static void __dwc3_set_mode(struct work_struct *work) > struct dwc3 *dwc = work_to_dwc(work); > unsigned long flags; > int ret; > + int i; > u32 reg; > u32 desired_dr_role; > > @@ -200,8 +201,10 @@ static void __dwc3_set_mode(struct work_struct *work) > } else { > if (dwc->usb2_phy) > otg_set_vbus(dwc->usb2_phy->otg, true); > - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST); > - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); > + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); > + } > if (dwc->dis_split_quirk) { > reg = dwc3_readl(dwc->regs, DWC3_GUCTL3); > reg |= DWC3_GUCTL3_SPLITDISABLE; > @@ -216,8 +219,8 @@ static void __dwc3_set_mode(struct work_struct *work) > > if (dwc->usb2_phy) > otg_set_vbus(dwc->usb2_phy->otg, false); > - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE); > - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE); > + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE); > + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE); > > ret = dwc3_gadget_init(dwc); > if (ret) > @@ -575,22 +578,14 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc) > return ret; > } > > -/** > - * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core > - * @dwc: Pointer to our controller context structure > - * > - * Returns 0 on success. The USB PHY interfaces are configured but not > - * initialized. The PHY interfaces and the PHYs get initialized together with > - * the core in dwc3_core_init. > - */ > -static int dwc3_phy_setup(struct dwc3 *dwc) > +static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index) > { > unsigned int hw_mode; > u32 reg; > > hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); > > - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); > + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index)); > > /* > * Make sure UX_EXIT_PX is cleared as that causes issues with some > @@ -645,9 +640,19 @@ static int dwc3_phy_setup(struct dwc3 *dwc) > if (dwc->dis_del_phy_power_chg_quirk) > reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; > > - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); > + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg); > > - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); > + return 0; > +} > + > +static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index) > +{ > + unsigned int hw_mode; > + u32 reg; > + > + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); > + > + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index)); > > /* Select the HS PHY interface */ > switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) { > @@ -659,7 +664,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc) > } else if (dwc->hsphy_interface && > !strncmp(dwc->hsphy_interface, "ulpi", 4)) { > reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI; > - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); > + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg); > } else { > /* Relying on default value. */ > if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI)) > @@ -726,7 +731,35 @@ static int dwc3_phy_setup(struct dwc3 *dwc) > if (dwc->ulpi_ext_vbus_drv) > reg |= DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV; > > - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); > + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg); > + > + return 0; > +} > + > +/** > + * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core > + * @dwc: Pointer to our controller context structure > + * > + * Returns 0 on success. The USB PHY interfaces are configured but not > + * initialized. The PHY interfaces and the PHYs get initialized together with > + * the core in dwc3_core_init. > + */ > +static int dwc3_phy_setup(struct dwc3 *dwc) > +{ > + int i; > + int ret; > + > + for (i = 0; i < dwc->num_usb3_ports; i++) { > + ret = dwc3_ss_phy_setup(dwc, i); > + if (ret) > + return ret; > + } > + > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + ret = dwc3_hs_phy_setup(dwc, i); > + if (ret) > + return ret; > + } > > return 0; > } > @@ -734,22 +767,36 @@ static int dwc3_phy_setup(struct dwc3 *dwc) > static int dwc3_phy_init(struct dwc3 *dwc) > { > int ret; > + int i, j; Minor style nit, can we declare in separate lines? > > usb_phy_init(dwc->usb2_phy); > usb_phy_init(dwc->usb3_phy); > > - ret = phy_init(dwc->usb2_generic_phy); > - if (ret < 0) > - goto err_shutdown_usb3_phy; > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + ret = phy_init(dwc->usb2_generic_phy[i]); > + if (ret < 0) { > + /* clean up prior initialized HS PHYs */ > + for (j = 0; j < i; j++) > + phy_exit(dwc->usb2_generic_phy[j]); > + goto err_shutdown_usb3_phy; > + } > + } > > - ret = phy_init(dwc->usb3_generic_phy); > - if (ret < 0) > - goto err_exit_usb2_phy; > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + ret = phy_init(dwc->usb3_generic_phy[i]); > + if (ret < 0) { > + /* clean up prior initialized SS PHYs */ > + for (j = 0; j < i; j++) > + phy_exit(dwc->usb3_generic_phy[j]); > + goto err_exit_usb2_phy; > + } > + } > > return 0; > > err_exit_usb2_phy: > - phy_exit(dwc->usb2_generic_phy); > + for (i = 0; i < dwc->num_usb2_ports; i++) > + phy_exit(dwc->usb2_generic_phy[i]); > err_shutdown_usb3_phy: > usb_phy_shutdown(dwc->usb3_phy); > usb_phy_shutdown(dwc->usb2_phy); > @@ -759,8 +806,12 @@ static int dwc3_phy_init(struct dwc3 *dwc) > > static void dwc3_phy_exit(struct dwc3 *dwc) > { > - phy_exit(dwc->usb3_generic_phy); > - phy_exit(dwc->usb2_generic_phy); > + int i; > + > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + phy_exit(dwc->usb3_generic_phy[i]); > + phy_exit(dwc->usb2_generic_phy[i]); > + } > > usb_phy_shutdown(dwc->usb3_phy); > usb_phy_shutdown(dwc->usb2_phy); > @@ -769,22 +820,36 @@ static void dwc3_phy_exit(struct dwc3 *dwc) > static int dwc3_phy_power_on(struct dwc3 *dwc) > { > int ret; > + int i, j; > > usb_phy_set_suspend(dwc->usb2_phy, 0); > usb_phy_set_suspend(dwc->usb3_phy, 0); > > - ret = phy_power_on(dwc->usb2_generic_phy); > - if (ret < 0) > - goto err_suspend_usb3_phy; > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + ret = phy_power_on(dwc->usb2_generic_phy[i]); > + if (ret < 0) { > + /* Turn off prior ON'ed HS Phy's */ > + for (j = 0; j < i; j++) > + phy_power_off(dwc->usb2_generic_phy[j]); > + goto err_suspend_usb3_phy; > + } > + } > > - ret = phy_power_on(dwc->usb3_generic_phy); > - if (ret < 0) > - goto err_power_off_usb2_phy; > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + ret = phy_power_on(dwc->usb3_generic_phy[i]); > + if (ret < 0) { > + /* Turn of prior ON'ed SS Phy's */ > + for (j = 0; j < i; j++) > + phy_power_off(dwc->usb3_generic_phy[j]); > + goto err_power_off_usb2_phy; > + } > + } > > return 0; > > err_power_off_usb2_phy: > - phy_power_off(dwc->usb2_generic_phy); > + for (i = 0; i < dwc->num_usb2_ports; i++) > + phy_power_off(dwc->usb2_generic_phy[i]); > err_suspend_usb3_phy: > usb_phy_set_suspend(dwc->usb3_phy, 1); > usb_phy_set_suspend(dwc->usb2_phy, 1); > @@ -794,8 +859,12 @@ static int dwc3_phy_power_on(struct dwc3 *dwc) > > static void dwc3_phy_power_off(struct dwc3 *dwc) > { > - phy_power_off(dwc->usb3_generic_phy); > - phy_power_off(dwc->usb2_generic_phy); > + int i; > + > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + phy_power_off(dwc->usb3_generic_phy[i]); > + phy_power_off(dwc->usb2_generic_phy[i]); > + } > > usb_phy_set_suspend(dwc->usb3_phy, 1); > usb_phy_set_suspend(dwc->usb2_phy, 1); > @@ -1073,6 +1142,7 @@ static int dwc3_core_init(struct dwc3 *dwc) > unsigned int hw_mode; > u32 reg; > int ret; > + int i; > > hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); > > @@ -1116,15 +1186,19 @@ static int dwc3_core_init(struct dwc3 *dwc) > if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && > !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { > if (!dwc->dis_u3_susphy_quirk) { > - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); > - reg |= DWC3_GUSB3PIPECTL_SUSPHY; > - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); > + for (i = 0; i < dwc->num_usb3_ports; i++) { > + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i)); > + reg |= DWC3_GUSB3PIPECTL_SUSPHY; > + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg); > + } > } > > if (!dwc->dis_u2_susphy_quirk) { > - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); > - reg |= DWC3_GUSB2PHYCFG_SUSPHY; > - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); > + reg |= DWC3_GUSB2PHYCFG_SUSPHY; > + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); > + } > } > } > > @@ -1281,6 +1355,42 @@ static int dwc3_core_init(struct dwc3 *dwc) > return ret; > } > > +static int dwc3_get_multiport_phys(struct dwc3 *dwc) > +{ > + int ret; > + struct device *dev = dwc->dev; > + int i; > + char phy_name[11]; Minor minor nit. Can we reorder this as follow: struct device *dev = dwc->dev; char phy_name[11]; int ret; int i; > + > + /* > + * Each port is at least HS capable. So loop over num_usb2_ports > + * to get available phy's. > + */ > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + sprintf(phy_name, "usb2-port%d", i); > + dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name); > + if (IS_ERR(dwc->usb2_generic_phy[i])) { > + ret = PTR_ERR(dwc->usb2_generic_phy[i]); > + if (ret == -ENOSYS || ret == -ENODEV) > + dwc->usb2_generic_phy[i] = NULL; > + else > + return dev_err_probe(dev, ret, "usb2 phy: %s not configured\n", phy_name); > + } > + > + sprintf(phy_name, "usb3-port%d", i); > + dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name); > + if (IS_ERR(dwc->usb3_generic_phy[i])) { > + ret = PTR_ERR(dwc->usb3_generic_phy[i]); > + if (ret == -ENOSYS || ret == -ENODEV) > + dwc->usb3_generic_phy[i] = NULL; > + else > + return dev_err_probe(dev, ret, "usb3 phy: %s not configured\n", phy_name); > + } > + } > + > + return 0; > +} > + > static int dwc3_core_get_phy(struct dwc3 *dwc) > { > struct device *dev = dwc->dev; > @@ -1311,20 +1421,23 @@ static int dwc3_core_get_phy(struct dwc3 *dwc) > return dev_err_probe(dev, ret, "no usb3 phy configured\n"); > } > > - dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); > - if (IS_ERR(dwc->usb2_generic_phy)) { > - ret = PTR_ERR(dwc->usb2_generic_phy); > + if (dwc->num_usb2_ports > 1) > + return dwc3_get_multiport_phys(dwc); > + > + dwc->usb2_generic_phy[0] = devm_phy_get(dev, "usb2-phy"); > + if (IS_ERR(dwc->usb2_generic_phy[0])) { > + ret = PTR_ERR(dwc->usb2_generic_phy[0]); > if (ret == -ENOSYS || ret == -ENODEV) > - dwc->usb2_generic_phy = NULL; > + dwc->usb2_generic_phy[0] = NULL; > else > return dev_err_probe(dev, ret, "no usb2 phy configured\n"); > } > > - dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); > - if (IS_ERR(dwc->usb3_generic_phy)) { > - ret = PTR_ERR(dwc->usb3_generic_phy); > + dwc->usb3_generic_phy[0] = devm_phy_get(dev, "usb3-phy"); > + if (IS_ERR(dwc->usb3_generic_phy[0])) { > + ret = PTR_ERR(dwc->usb3_generic_phy[0]); > if (ret == -ENOSYS || ret == -ENODEV) > - dwc->usb3_generic_phy = NULL; > + dwc->usb3_generic_phy[0] = NULL; > else > return dev_err_probe(dev, ret, "no usb3 phy configured\n"); > } > @@ -1336,6 +1449,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) > { > struct device *dev = dwc->dev; > int ret; > + int i; > > switch (dwc->dr_mode) { > case USB_DR_MODE_PERIPHERAL: > @@ -1343,8 +1457,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) > > if (dwc->usb2_phy) > otg_set_vbus(dwc->usb2_phy->otg, false); > - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE); > - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE); > + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE); > + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE); > > ret = dwc3_gadget_init(dwc); > if (ret) > @@ -1355,8 +1469,10 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) > > if (dwc->usb2_phy) > otg_set_vbus(dwc->usb2_phy->otg, true); > - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST); > - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); > + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); > + } > > ret = dwc3_host_init(dwc); > if (ret) > @@ -2046,6 +2162,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc) > > static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) > { > + int i; > unsigned long flags; > u32 reg; > > @@ -2066,17 +2183,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) > /* Let controller to suspend HSPHY before PHY driver suspends */ > if (dwc->dis_u2_susphy_quirk || > dwc->dis_enblslpm_quirk) { > - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); > - reg |= DWC3_GUSB2PHYCFG_ENBLSLPM | > - DWC3_GUSB2PHYCFG_SUSPHY; > - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); > + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM | > + DWC3_GUSB2PHYCFG_SUSPHY; > + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); > + } > > /* Give some time for USB2 PHY to suspend */ > usleep_range(5000, 6000); > } > > - phy_pm_runtime_put_sync(dwc->usb2_generic_phy); > - phy_pm_runtime_put_sync(dwc->usb3_generic_phy); > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]); > + phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]); > + } > break; > case DWC3_GCTL_PRTCAP_OTG: > /* do nothing during runtime_suspend */ > @@ -2105,6 +2226,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) > { > unsigned long flags; > int ret; > + int i; > u32 reg; > > switch (dwc->current_dr_role) { > @@ -2125,17 +2247,21 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) > break; > } > /* Restore GUSB2PHYCFG bits that were modified in suspend */ > - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); > - if (dwc->dis_u2_susphy_quirk) > - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); > + if (dwc->dis_u2_susphy_quirk) > + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; > > - if (dwc->dis_enblslpm_quirk) > - reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; > + if (dwc->dis_enblslpm_quirk) > + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; > > - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); > + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); > + } > > - phy_pm_runtime_get_sync(dwc->usb2_generic_phy); > - phy_pm_runtime_get_sync(dwc->usb3_generic_phy); > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]); > + phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]); > + } > break; > case DWC3_GCTL_PRTCAP_OTG: > /* nothing to do on runtime_resume */ > diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h > index 21312703e053..0bba074b44e4 100644 > --- a/drivers/usb/dwc3/core.h > +++ b/drivers/usb/dwc3/core.h > @@ -35,6 +35,9 @@ > > #define DWC3_MSG_MAX 500 > > +/* Number of ports supported by a multiport controller */ > +#define MAX_PORTS_SUPPORTED 4 > + > /* Define XHCI Extcap register offsets for getting multiport info */ > #define XHCI_HCC_PARAMS_OFFSET 0x10 > #define DWC3_XHCI_HCSPARAMS1 0x04 > @@ -1038,8 +1041,8 @@ struct dwc3_scratchpad_array { > * @usb3_phy: pointer to USB3 PHY > * @num_usb2_ports: number of usb2 ports. > * @num_usb3_ports: number of usb3 ports. > - * @usb2_generic_phy: pointer to USB2 PHY > - * @usb3_generic_phy: pointer to USB3 PHY > + * @usb2_generic_phy: pointer to array of USB2 PHY > + * @usb3_generic_phy: pointer to array of USB3 PHY > * @phys_ready: flag to indicate that PHYs are ready > * @ulpi: pointer to ulpi interface > * @ulpi_ready: flag to indicate that ULPI is initialized > @@ -1177,9 +1180,8 @@ struct dwc3 { > > u32 num_usb2_ports; > u32 num_usb3_ports; > - > - struct phy *usb2_generic_phy; > - struct phy *usb3_generic_phy; > + struct phy *usb2_generic_phy[MAX_PORTS_SUPPORTED]; > + struct phy *usb3_generic_phy[MAX_PORTS_SUPPORTED]; > > bool phys_ready; > > diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c > index 039bf241769a..0377295717ab 100644 > --- a/drivers/usb/dwc3/drd.c > +++ b/drivers/usb/dwc3/drd.c > @@ -328,6 +328,7 @@ static void dwc3_otg_device_exit(struct dwc3 *dwc) > void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) > { > int ret; > + int i; > u32 reg; > int id; > unsigned long flags; > @@ -386,9 +387,11 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) > } else { > if (dwc->usb2_phy) > otg_set_vbus(dwc->usb2_phy->otg, true); > - if (dwc->usb2_generic_phy) > - phy_set_mode(dwc->usb2_generic_phy, > - PHY_MODE_USB_HOST); > + for (i = 0; i < dwc->num_usb2_ports; i++) { > + if (dwc->usb2_generic_phy[i]) > + phy_set_mode(dwc->usb2_generic_phy[i], > + PHY_MODE_USB_HOST); > + } > } > break; > case DWC3_OTG_ROLE_DEVICE: > @@ -400,8 +403,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) > > if (dwc->usb2_phy) > otg_set_vbus(dwc->usb2_phy->otg, false); > - if (dwc->usb2_generic_phy) > - phy_set_mode(dwc->usb2_generic_phy, > + if (dwc->usb2_generic_phy[0]) > + phy_set_mode(dwc->usb2_generic_phy[0], > PHY_MODE_USB_DEVICE); > ret = dwc3_gadget_init(dwc); > if (ret) > -- > 2.40.0 > Thanks, Thinh
On 5/3/2023 3:41 AM, Thinh Nguyen wrote: > On Mon, May 01, 2023, Krishna Kurapati wrote: >> Currently the DWC3 driver supports only single port controller >> which requires at most one HS and one SS PHY. >> >> But the DWC3 USB controller can be connected to multiple ports and >> each port can have their own PHYs. Each port of the multiport >> controller can either be HS+SS capable or HS only capable >> Proper quantification of them is required to modify GUSB2PHYCFG >> and GUSB3PIPECTL registers appropriately. >> >> Add support for detecting, obtaining and configuring phy's supported >> by a multiport controller and limit the max number of ports >> supported to 4. >> >> Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com> >> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > > Are you a co-author or only Harsh is the main author of this patch? > Harsh began developing this series and pushed the first 3 RFC versions (supporting both usb-phy / generic phy frameworks) until maintainers pointed out that we only support generic phy changes. From then on I took it up and started pushing next versions. I would say both of us are primary authors for this patch. But if there has to be only one, I would say its Harsh. Regards, Krishna, >> --- >> drivers/usb/dwc3/core.c | 262 +++++++++++++++++++++++++++++----------- >> drivers/usb/dwc3/core.h | 12 +- >> drivers/usb/dwc3/drd.c | 13 +- >> 3 files changed, 209 insertions(+), 78 deletions(-) >> >> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c >> index 8625fc5c7ab4..b91c3f965abc 100644 >> --- a/drivers/usb/dwc3/core.c >> +++ b/drivers/usb/dwc3/core.c >> @@ -121,6 +121,7 @@ static void __dwc3_set_mode(struct work_struct *work) >> struct dwc3 *dwc = work_to_dwc(work); >> unsigned long flags; >> int ret; >> + int i; >> u32 reg; >> u32 desired_dr_role; >> >> @@ -200,8 +201,10 @@ static void __dwc3_set_mode(struct work_struct *work) >> } else { >> if (dwc->usb2_phy) >> otg_set_vbus(dwc->usb2_phy->otg, true); >> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST); >> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); >> + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); >> + } >> if (dwc->dis_split_quirk) { >> reg = dwc3_readl(dwc->regs, DWC3_GUCTL3); >> reg |= DWC3_GUCTL3_SPLITDISABLE; >> @@ -216,8 +219,8 @@ static void __dwc3_set_mode(struct work_struct *work) >> >> if (dwc->usb2_phy) >> otg_set_vbus(dwc->usb2_phy->otg, false); >> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE); >> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE); >> + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE); >> + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE); >> >> ret = dwc3_gadget_init(dwc); >> if (ret) >> @@ -575,22 +578,14 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc) >> return ret; >> } >> >> -/** >> - * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core >> - * @dwc: Pointer to our controller context structure >> - * >> - * Returns 0 on success. The USB PHY interfaces are configured but not >> - * initialized. The PHY interfaces and the PHYs get initialized together with >> - * the core in dwc3_core_init. >> - */ >> -static int dwc3_phy_setup(struct dwc3 *dwc) >> +static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index) >> { >> unsigned int hw_mode; >> u32 reg; >> >> hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); >> >> - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); >> + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index)); >> >> /* >> * Make sure UX_EXIT_PX is cleared as that causes issues with some >> @@ -645,9 +640,19 @@ static int dwc3_phy_setup(struct dwc3 *dwc) >> if (dwc->dis_del_phy_power_chg_quirk) >> reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; >> >> - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); >> + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg); >> >> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); >> + return 0; >> +} >> + >> +static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index) >> +{ >> + unsigned int hw_mode; >> + u32 reg; >> + >> + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); >> + >> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index)); >> >> /* Select the HS PHY interface */ >> switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) { >> @@ -659,7 +664,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc) >> } else if (dwc->hsphy_interface && >> !strncmp(dwc->hsphy_interface, "ulpi", 4)) { >> reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI; >> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); >> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg); >> } else { >> /* Relying on default value. */ >> if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI)) >> @@ -726,7 +731,35 @@ static int dwc3_phy_setup(struct dwc3 *dwc) >> if (dwc->ulpi_ext_vbus_drv) >> reg |= DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV; >> >> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); >> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg); >> + >> + return 0; >> +} >> + >> +/** >> + * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core >> + * @dwc: Pointer to our controller context structure >> + * >> + * Returns 0 on success. The USB PHY interfaces are configured but not >> + * initialized. The PHY interfaces and the PHYs get initialized together with >> + * the core in dwc3_core_init. >> + */ >> +static int dwc3_phy_setup(struct dwc3 *dwc) >> +{ >> + int i; >> + int ret; >> + >> + for (i = 0; i < dwc->num_usb3_ports; i++) { >> + ret = dwc3_ss_phy_setup(dwc, i); >> + if (ret) >> + return ret; >> + } >> + >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + ret = dwc3_hs_phy_setup(dwc, i); >> + if (ret) >> + return ret; >> + } >> >> return 0; >> } >> @@ -734,22 +767,36 @@ static int dwc3_phy_setup(struct dwc3 *dwc) >> static int dwc3_phy_init(struct dwc3 *dwc) >> { >> int ret; >> + int i, j; > > Minor style nit, can we declare in separate lines? > >> >> usb_phy_init(dwc->usb2_phy); >> usb_phy_init(dwc->usb3_phy); >> >> - ret = phy_init(dwc->usb2_generic_phy); >> - if (ret < 0) >> - goto err_shutdown_usb3_phy; >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + ret = phy_init(dwc->usb2_generic_phy[i]); >> + if (ret < 0) { >> + /* clean up prior initialized HS PHYs */ >> + for (j = 0; j < i; j++) >> + phy_exit(dwc->usb2_generic_phy[j]); >> + goto err_shutdown_usb3_phy; >> + } >> + } >> >> - ret = phy_init(dwc->usb3_generic_phy); >> - if (ret < 0) >> - goto err_exit_usb2_phy; >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + ret = phy_init(dwc->usb3_generic_phy[i]); >> + if (ret < 0) { >> + /* clean up prior initialized SS PHYs */ >> + for (j = 0; j < i; j++) >> + phy_exit(dwc->usb3_generic_phy[j]); >> + goto err_exit_usb2_phy; >> + } >> + } >> >> return 0; >> >> err_exit_usb2_phy: >> - phy_exit(dwc->usb2_generic_phy); >> + for (i = 0; i < dwc->num_usb2_ports; i++) >> + phy_exit(dwc->usb2_generic_phy[i]); >> err_shutdown_usb3_phy: >> usb_phy_shutdown(dwc->usb3_phy); >> usb_phy_shutdown(dwc->usb2_phy); >> @@ -759,8 +806,12 @@ static int dwc3_phy_init(struct dwc3 *dwc) >> >> static void dwc3_phy_exit(struct dwc3 *dwc) >> { >> - phy_exit(dwc->usb3_generic_phy); >> - phy_exit(dwc->usb2_generic_phy); >> + int i; >> + >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + phy_exit(dwc->usb3_generic_phy[i]); >> + phy_exit(dwc->usb2_generic_phy[i]); >> + } >> >> usb_phy_shutdown(dwc->usb3_phy); >> usb_phy_shutdown(dwc->usb2_phy); >> @@ -769,22 +820,36 @@ static void dwc3_phy_exit(struct dwc3 *dwc) >> static int dwc3_phy_power_on(struct dwc3 *dwc) >> { >> int ret; >> + int i, j; >> >> usb_phy_set_suspend(dwc->usb2_phy, 0); >> usb_phy_set_suspend(dwc->usb3_phy, 0); >> >> - ret = phy_power_on(dwc->usb2_generic_phy); >> - if (ret < 0) >> - goto err_suspend_usb3_phy; >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + ret = phy_power_on(dwc->usb2_generic_phy[i]); >> + if (ret < 0) { >> + /* Turn off prior ON'ed HS Phy's */ >> + for (j = 0; j < i; j++) >> + phy_power_off(dwc->usb2_generic_phy[j]); >> + goto err_suspend_usb3_phy; >> + } >> + } >> >> - ret = phy_power_on(dwc->usb3_generic_phy); >> - if (ret < 0) >> - goto err_power_off_usb2_phy; >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + ret = phy_power_on(dwc->usb3_generic_phy[i]); >> + if (ret < 0) { >> + /* Turn of prior ON'ed SS Phy's */ >> + for (j = 0; j < i; j++) >> + phy_power_off(dwc->usb3_generic_phy[j]); >> + goto err_power_off_usb2_phy; >> + } >> + } >> >> return 0; >> >> err_power_off_usb2_phy: >> - phy_power_off(dwc->usb2_generic_phy); >> + for (i = 0; i < dwc->num_usb2_ports; i++) >> + phy_power_off(dwc->usb2_generic_phy[i]); >> err_suspend_usb3_phy: >> usb_phy_set_suspend(dwc->usb3_phy, 1); >> usb_phy_set_suspend(dwc->usb2_phy, 1); >> @@ -794,8 +859,12 @@ static int dwc3_phy_power_on(struct dwc3 *dwc) >> >> static void dwc3_phy_power_off(struct dwc3 *dwc) >> { >> - phy_power_off(dwc->usb3_generic_phy); >> - phy_power_off(dwc->usb2_generic_phy); >> + int i; >> + >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + phy_power_off(dwc->usb3_generic_phy[i]); >> + phy_power_off(dwc->usb2_generic_phy[i]); >> + } >> >> usb_phy_set_suspend(dwc->usb3_phy, 1); >> usb_phy_set_suspend(dwc->usb2_phy, 1); >> @@ -1073,6 +1142,7 @@ static int dwc3_core_init(struct dwc3 *dwc) >> unsigned int hw_mode; >> u32 reg; >> int ret; >> + int i; >> >> hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); >> >> @@ -1116,15 +1186,19 @@ static int dwc3_core_init(struct dwc3 *dwc) >> if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && >> !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { >> if (!dwc->dis_u3_susphy_quirk) { >> - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); >> - reg |= DWC3_GUSB3PIPECTL_SUSPHY; >> - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); >> + for (i = 0; i < dwc->num_usb3_ports; i++) { >> + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i)); >> + reg |= DWC3_GUSB3PIPECTL_SUSPHY; >> + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg); >> + } >> } >> >> if (!dwc->dis_u2_susphy_quirk) { >> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); >> - reg |= DWC3_GUSB2PHYCFG_SUSPHY; >> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); >> + reg |= DWC3_GUSB2PHYCFG_SUSPHY; >> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); >> + } >> } >> } >> >> @@ -1281,6 +1355,42 @@ static int dwc3_core_init(struct dwc3 *dwc) >> return ret; >> } >> >> +static int dwc3_get_multiport_phys(struct dwc3 *dwc) >> +{ >> + int ret; >> + struct device *dev = dwc->dev; >> + int i; >> + char phy_name[11]; > > Minor minor nit. Can we reorder this as follow: > struct device *dev = dwc->dev; > char phy_name[11]; > int ret; > int i; > > >> + >> + /* >> + * Each port is at least HS capable. So loop over num_usb2_ports >> + * to get available phy's. >> + */ >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + sprintf(phy_name, "usb2-port%d", i); >> + dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name); >> + if (IS_ERR(dwc->usb2_generic_phy[i])) { >> + ret = PTR_ERR(dwc->usb2_generic_phy[i]); >> + if (ret == -ENOSYS || ret == -ENODEV) >> + dwc->usb2_generic_phy[i] = NULL; >> + else >> + return dev_err_probe(dev, ret, "usb2 phy: %s not configured\n", phy_name); >> + } >> + >> + sprintf(phy_name, "usb3-port%d", i); >> + dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name); >> + if (IS_ERR(dwc->usb3_generic_phy[i])) { >> + ret = PTR_ERR(dwc->usb3_generic_phy[i]); >> + if (ret == -ENOSYS || ret == -ENODEV) >> + dwc->usb3_generic_phy[i] = NULL; >> + else >> + return dev_err_probe(dev, ret, "usb3 phy: %s not configured\n", phy_name); >> + } >> + } >> + >> + return 0; >> +} >> + >> static int dwc3_core_get_phy(struct dwc3 *dwc) >> { >> struct device *dev = dwc->dev; >> @@ -1311,20 +1421,23 @@ static int dwc3_core_get_phy(struct dwc3 *dwc) >> return dev_err_probe(dev, ret, "no usb3 phy configured\n"); >> } >> >> - dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); >> - if (IS_ERR(dwc->usb2_generic_phy)) { >> - ret = PTR_ERR(dwc->usb2_generic_phy); >> + if (dwc->num_usb2_ports > 1) >> + return dwc3_get_multiport_phys(dwc); >> + >> + dwc->usb2_generic_phy[0] = devm_phy_get(dev, "usb2-phy"); >> + if (IS_ERR(dwc->usb2_generic_phy[0])) { >> + ret = PTR_ERR(dwc->usb2_generic_phy[0]); >> if (ret == -ENOSYS || ret == -ENODEV) >> - dwc->usb2_generic_phy = NULL; >> + dwc->usb2_generic_phy[0] = NULL; >> else >> return dev_err_probe(dev, ret, "no usb2 phy configured\n"); >> } >> >> - dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); >> - if (IS_ERR(dwc->usb3_generic_phy)) { >> - ret = PTR_ERR(dwc->usb3_generic_phy); >> + dwc->usb3_generic_phy[0] = devm_phy_get(dev, "usb3-phy"); >> + if (IS_ERR(dwc->usb3_generic_phy[0])) { >> + ret = PTR_ERR(dwc->usb3_generic_phy[0]); >> if (ret == -ENOSYS || ret == -ENODEV) >> - dwc->usb3_generic_phy = NULL; >> + dwc->usb3_generic_phy[0] = NULL; >> else >> return dev_err_probe(dev, ret, "no usb3 phy configured\n"); >> } >> @@ -1336,6 +1449,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) >> { >> struct device *dev = dwc->dev; >> int ret; >> + int i; >> >> switch (dwc->dr_mode) { >> case USB_DR_MODE_PERIPHERAL: >> @@ -1343,8 +1457,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) >> >> if (dwc->usb2_phy) >> otg_set_vbus(dwc->usb2_phy->otg, false); >> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE); >> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE); >> + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE); >> + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE); >> >> ret = dwc3_gadget_init(dwc); >> if (ret) >> @@ -1355,8 +1469,10 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) >> >> if (dwc->usb2_phy) >> otg_set_vbus(dwc->usb2_phy->otg, true); >> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST); >> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); >> + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); >> + } >> >> ret = dwc3_host_init(dwc); >> if (ret) >> @@ -2046,6 +2162,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc) >> >> static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) >> { >> + int i; >> unsigned long flags; >> u32 reg; >> >> @@ -2066,17 +2183,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) >> /* Let controller to suspend HSPHY before PHY driver suspends */ >> if (dwc->dis_u2_susphy_quirk || >> dwc->dis_enblslpm_quirk) { >> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); >> - reg |= DWC3_GUSB2PHYCFG_ENBLSLPM | >> - DWC3_GUSB2PHYCFG_SUSPHY; >> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); >> + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM | >> + DWC3_GUSB2PHYCFG_SUSPHY; >> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); >> + } >> >> /* Give some time for USB2 PHY to suspend */ >> usleep_range(5000, 6000); >> } >> >> - phy_pm_runtime_put_sync(dwc->usb2_generic_phy); >> - phy_pm_runtime_put_sync(dwc->usb3_generic_phy); >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]); >> + phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]); >> + } >> break; >> case DWC3_GCTL_PRTCAP_OTG: >> /* do nothing during runtime_suspend */ >> @@ -2105,6 +2226,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) >> { >> unsigned long flags; >> int ret; >> + int i; >> u32 reg; >> >> switch (dwc->current_dr_role) { >> @@ -2125,17 +2247,21 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) >> break; >> } >> /* Restore GUSB2PHYCFG bits that were modified in suspend */ >> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); >> - if (dwc->dis_u2_susphy_quirk) >> - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); >> + if (dwc->dis_u2_susphy_quirk) >> + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; >> >> - if (dwc->dis_enblslpm_quirk) >> - reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; >> + if (dwc->dis_enblslpm_quirk) >> + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; >> >> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); >> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); >> + } >> >> - phy_pm_runtime_get_sync(dwc->usb2_generic_phy); >> - phy_pm_runtime_get_sync(dwc->usb3_generic_phy); >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]); >> + phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]); >> + } >> break; >> case DWC3_GCTL_PRTCAP_OTG: >> /* nothing to do on runtime_resume */ >> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h >> index 21312703e053..0bba074b44e4 100644 >> --- a/drivers/usb/dwc3/core.h >> +++ b/drivers/usb/dwc3/core.h >> @@ -35,6 +35,9 @@ >> >> #define DWC3_MSG_MAX 500 >> >> +/* Number of ports supported by a multiport controller */ >> +#define MAX_PORTS_SUPPORTED 4 >> + >> /* Define XHCI Extcap register offsets for getting multiport info */ >> #define XHCI_HCC_PARAMS_OFFSET 0x10 >> #define DWC3_XHCI_HCSPARAMS1 0x04 >> @@ -1038,8 +1041,8 @@ struct dwc3_scratchpad_array { >> * @usb3_phy: pointer to USB3 PHY >> * @num_usb2_ports: number of usb2 ports. >> * @num_usb3_ports: number of usb3 ports. >> - * @usb2_generic_phy: pointer to USB2 PHY >> - * @usb3_generic_phy: pointer to USB3 PHY >> + * @usb2_generic_phy: pointer to array of USB2 PHY >> + * @usb3_generic_phy: pointer to array of USB3 PHY >> * @phys_ready: flag to indicate that PHYs are ready >> * @ulpi: pointer to ulpi interface >> * @ulpi_ready: flag to indicate that ULPI is initialized >> @@ -1177,9 +1180,8 @@ struct dwc3 { >> >> u32 num_usb2_ports; >> u32 num_usb3_ports; >> - >> - struct phy *usb2_generic_phy; >> - struct phy *usb3_generic_phy; >> + struct phy *usb2_generic_phy[MAX_PORTS_SUPPORTED]; >> + struct phy *usb3_generic_phy[MAX_PORTS_SUPPORTED]; >> >> bool phys_ready; >> >> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c >> index 039bf241769a..0377295717ab 100644 >> --- a/drivers/usb/dwc3/drd.c >> +++ b/drivers/usb/dwc3/drd.c >> @@ -328,6 +328,7 @@ static void dwc3_otg_device_exit(struct dwc3 *dwc) >> void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) >> { >> int ret; >> + int i; >> u32 reg; >> int id; >> unsigned long flags; >> @@ -386,9 +387,11 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) >> } else { >> if (dwc->usb2_phy) >> otg_set_vbus(dwc->usb2_phy->otg, true); >> - if (dwc->usb2_generic_phy) >> - phy_set_mode(dwc->usb2_generic_phy, >> - PHY_MODE_USB_HOST); >> + for (i = 0; i < dwc->num_usb2_ports; i++) { >> + if (dwc->usb2_generic_phy[i]) >> + phy_set_mode(dwc->usb2_generic_phy[i], >> + PHY_MODE_USB_HOST); >> + } >> } >> break; >> case DWC3_OTG_ROLE_DEVICE: >> @@ -400,8 +403,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) >> >> if (dwc->usb2_phy) >> otg_set_vbus(dwc->usb2_phy->otg, false); >> - if (dwc->usb2_generic_phy) >> - phy_set_mode(dwc->usb2_generic_phy, >> + if (dwc->usb2_generic_phy[0]) >> + phy_set_mode(dwc->usb2_generic_phy[0], >> PHY_MODE_USB_DEVICE); >> ret = dwc3_gadget_init(dwc); >> if (ret) >> -- >> 2.40.0 >> > > Thanks, > Thinh
On 5/2/2023 4:36 PM, Konrad Dybcio wrote: > > > On 1.05.2023 16:34, Krishna Kurapati wrote: >> Enable tertiary controller for SA8295P (based on SC8280XP). >> Add pinctrl support for usb ports to provide VBUS to connected peripherals. >> >> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 47 ++++++++++++++++++++++++ >> 1 file changed, 47 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts >> index fd253942e5e5..7e6061c43835 100644 >> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts >> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts >> @@ -584,6 +584,19 @@ &usb_1_qmpphy { >> status = "okay"; >> }; >> >> +&usb_2 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&usb2_en_state>, >> + <&usb3_en_state>, >> + <&usb4_en_state>, >> + <&usb5_en_state>; > This is misaligned. Also, please do property-n before property-names. > >> + status = "okay"; >> +}; >> + >> +&usb_2_dwc3 { >> + dr_mode = "host"; >> +}; >> + >> &usb_2_hsphy0 { >> vdda-pll-supply = <&vreg_l5a>; >> vdda18-supply = <&vreg_l7g>; >> @@ -729,3 +742,37 @@ wake-n-pins { >> }; >> }; >> }; >> + >> +&pmm8540c_gpios { >> + usb2_en_state: usb2-en-state { >> + pins = "gpio9"; >> + function = "normal"; >> + output-high; >> + power-source = <0>; > No drive-strength values? > > Konrad Hi Konrad, TBH, I didn't add the drive strength values as things worked out of the box with the current changes (may be the default value of drive strength is sufficient for us). Let me know if it is mandatory, I will add it up in the next version. Regards, Krishna, >> + }; >> +}; >> + >> +&pmm8540e_gpios { >> + usb3_en_state: usb3-en-state { >> + pins = "gpio5"; >> + function = "normal"; >> + output-high; >> + power-source = <0>; >> + }; >> +}; >> + >> +&pmm8540g_gpios { >> + usb4_en_state: usb4-en-state { >> + pins = "gpio5"; >> + function = "normal"; >> + output-high; >> + power-source = <0>; >> + }; >> + >> + usb5_en_state: usb5-en-state { >> + pins = "gpio9"; >> + function = "normal"; >> + output-high; >> + power-source = <0>; >> + }; >> +};
On Mon, May 01, 2023 at 08:04:41PM +0530, Krishna Kurapati wrote: > Currently the DWC3 driver supports only single port controller > which requires at most one HS and one SS PHY. > > But the DWC3 USB controller can be connected to multiple ports and > each port can have their own PHYs. Each port of the multiport > controller can either be HS+SS capable or HS only capable > Proper quantification of them is required to modify GUSB2PHYCFG > and GUSB3PIPECTL registers appropriately. > > Add support for detecting, obtaining and configuring phy's supported > by a multiport controller and limit the max number of ports > supported to 4. > > Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com> > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > --- > drivers/usb/dwc3/core.c | 262 +++++++++++++++++++++++++++++----------- > drivers/usb/dwc3/core.h | 12 +- > drivers/usb/dwc3/drd.c | 13 +- > 3 files changed, 209 insertions(+), 78 deletions(-) Note that this patch no longer applies and you need to rebase the series on mainline (e.g. including commit 1d72fab47656 ("USB: dwc3: refactor phy handling"). Johan
On 5/3/2023 4:40 PM, Johan Hovold wrote: > On Mon, May 01, 2023 at 08:04:41PM +0530, Krishna Kurapati wrote: >> Currently the DWC3 driver supports only single port controller >> which requires at most one HS and one SS PHY. >> >> But the DWC3 USB controller can be connected to multiple ports and >> each port can have their own PHYs. Each port of the multiport >> controller can either be HS+SS capable or HS only capable >> Proper quantification of them is required to modify GUSB2PHYCFG >> and GUSB3PIPECTL registers appropriately. >> >> Add support for detecting, obtaining and configuring phy's supported >> by a multiport controller and limit the max number of ports >> supported to 4. >> >> Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com> >> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> >> --- >> drivers/usb/dwc3/core.c | 262 +++++++++++++++++++++++++++++----------- >> drivers/usb/dwc3/core.h | 12 +- >> drivers/usb/dwc3/drd.c | 13 +- >> 3 files changed, 209 insertions(+), 78 deletions(-) > > Note that this patch no longer applies and you need to rebase the series > on mainline (e.g. including commit 1d72fab47656 ("USB: dwc3: refactor > phy handling"). > > Johan Hi Johan, This series is rebased on top of usb-next (on top of the above mentioned patch). Probably that is why its not applying on top of linux-next. Regards, Krishna,
On Wed, May 03, 2023 at 07:50:57PM +0530, Krishna Kurapati PSSNV wrote: > On 5/3/2023 4:40 PM, Johan Hovold wrote: > > On Mon, May 01, 2023 at 08:04:41PM +0530, Krishna Kurapati wrote: > >> Currently the DWC3 driver supports only single port controller > >> which requires at most one HS and one SS PHY. > >> > >> But the DWC3 USB controller can be connected to multiple ports and > >> each port can have their own PHYs. Each port of the multiport > >> controller can either be HS+SS capable or HS only capable > >> Proper quantification of them is required to modify GUSB2PHYCFG > >> and GUSB3PIPECTL registers appropriately. > >> > >> Add support for detecting, obtaining and configuring phy's supported > >> by a multiport controller and limit the max number of ports > >> supported to 4. > >> > >> Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com> > >> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > >> --- > >> drivers/usb/dwc3/core.c | 262 +++++++++++++++++++++++++++++----------- > >> drivers/usb/dwc3/core.h | 12 +- > >> drivers/usb/dwc3/drd.c | 13 +- > >> 3 files changed, 209 insertions(+), 78 deletions(-) > > > > Note that this patch no longer applies and you need to rebase the series > > on mainline (e.g. including commit 1d72fab47656 ("USB: dwc3: refactor > > phy handling"). > This series is rebased on top of usb-next (on top of the above > mentioned patch). Probably that is why its not applying on top of > linux-next. Indeed it is. Sorry about the noise. Let me go double check why it did not apply here. Perhaps I'm missing something else from usb-next. Johan
On Wed, May 03, 2023, Krishna Kurapati PSSNV wrote: > > > On 5/3/2023 3:41 AM, Thinh Nguyen wrote: > > On Mon, May 01, 2023, Krishna Kurapati wrote: > > > Currently the DWC3 driver supports only single port controller > > > which requires at most one HS and one SS PHY. > > > > > > But the DWC3 USB controller can be connected to multiple ports and > > > each port can have their own PHYs. Each port of the multiport > > > controller can either be HS+SS capable or HS only capable > > > Proper quantification of them is required to modify GUSB2PHYCFG > > > and GUSB3PIPECTL registers appropriately. > > > > > > Add support for detecting, obtaining and configuring phy's supported > > > by a multiport controller and limit the max number of ports > > > supported to 4. > > > > > > Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com> > > > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > > > > Are you a co-author or only Harsh is the main author of this patch? > > > Harsh began developing this series and pushed the first 3 RFC versions > (supporting both usb-phy / generic phy frameworks) until maintainers pointed > out that we only support generic phy changes. > > From then on I took it up and started pushing next versions. I would say > both of us are primary authors for this patch. But if there has to be only > one, I would say its Harsh. > > Regards, > Krishna, > I just want to check to give you proper credit for the patch's contribution. Since Harsh isn't the only one working on this you're not simply transporting this change. Perhaps you should add Co-developed-by tags. Thanks, Thinh
On 5/4/2023 3:25 AM, Thinh Nguyen wrote: > On Wed, May 03, 2023, Krishna Kurapati PSSNV wrote: >> >> >> On 5/3/2023 3:41 AM, Thinh Nguyen wrote: >>> On Mon, May 01, 2023, Krishna Kurapati wrote: >>>> Currently the DWC3 driver supports only single port controller >>>> which requires at most one HS and one SS PHY. >>>> >>>> But the DWC3 USB controller can be connected to multiple ports and >>>> each port can have their own PHYs. Each port of the multiport >>>> controller can either be HS+SS capable or HS only capable >>>> Proper quantification of them is required to modify GUSB2PHYCFG >>>> and GUSB3PIPECTL registers appropriately. >>>> >>>> Add support for detecting, obtaining and configuring phy's supported >>>> by a multiport controller and limit the max number of ports >>>> supported to 4. >>>> >>>> Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com> >>>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> >>> >>> Are you a co-author or only Harsh is the main author of this patch? >>> >> Harsh began developing this series and pushed the first 3 RFC versions >> (supporting both usb-phy / generic phy frameworks) until maintainers pointed >> out that we only support generic phy changes. >> >> From then on I took it up and started pushing next versions. I would say >> both of us are primary authors for this patch. But if there has to be only >> one, I would say its Harsh. >> >> Regards, >> Krishna, >> > > I just want to check to give you proper credit for the patch's > contribution. Since Harsh isn't the only one working on this you're not > simply transporting this change. Perhaps you should add Co-developed-by > tags. > > Thanks, > Thinh Sure, Let me put myself under Co-developed-by in the next version. Regards, Krishna,
On 3.05.2023 05:55, Krishna Kurapati PSSNV wrote: > > > On 5/2/2023 4:36 PM, Konrad Dybcio wrote: >> >> >> On 1.05.2023 16:34, Krishna Kurapati wrote: >>> Enable tertiary controller for SA8295P (based on SC8280XP). >>> Add pinctrl support for usb ports to provide VBUS to connected peripherals. >>> >>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> >>> --- >>> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 47 ++++++++++++++++++++++++ >>> 1 file changed, 47 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts >>> index fd253942e5e5..7e6061c43835 100644 >>> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts >>> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts >>> @@ -584,6 +584,19 @@ &usb_1_qmpphy { >>> status = "okay"; >>> }; >>> +&usb_2 { >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&usb2_en_state>, >>> + <&usb3_en_state>, >>> + <&usb4_en_state>, >>> + <&usb5_en_state>; >> This is misaligned. Also, please do property-n before property-names. >> >>> + status = "okay"; >>> +}; >>> + >>> +&usb_2_dwc3 { >>> + dr_mode = "host"; >>> +}; >>> + >>> &usb_2_hsphy0 { >>> vdda-pll-supply = <&vreg_l5a>; >>> vdda18-supply = <&vreg_l7g>; >>> @@ -729,3 +742,37 @@ wake-n-pins { >>> }; >>> }; >>> }; >>> + >>> +&pmm8540c_gpios { >>> + usb2_en_state: usb2-en-state { >>> + pins = "gpio9"; >>> + function = "normal"; >>> + output-high; >>> + power-source = <0>; >> No drive-strength values? >> >> Konrad > > Hi Konrad, > > TBH, I didn't add the drive strength values as things worked out of the box with the current changes (may be the default value of drive strength is sufficient for us). > > Let me know if it is mandatory, I will add it up in the next version. It's not, but it helps eliminate one more potential inconsistency Konrad > > Regards, > Krishna, > >>> + }; >>> +}; >>> + >>> +&pmm8540e_gpios { >>> + usb3_en_state: usb3-en-state { >>> + pins = "gpio5"; >>> + function = "normal"; >>> + output-high; >>> + power-source = <0>; >>> + }; >>> +}; >>> + >>> +&pmm8540g_gpios { >>> + usb4_en_state: usb4-en-state { >>> + pins = "gpio5"; >>> + function = "normal"; >>> + output-high; >>> + power-source = <0>; >>> + }; >>> + >>> + usb5_en_state: usb5-en-state { >>> + pins = "gpio9"; >>> + function = "normal"; >>> + output-high; >>> + power-source = <0>; >>> + }; >>> +};
Currently the DWC3 driver supports only single port controller which requires at most two PHYs ie HS and SS PHYs. There are SoCs that has DWC3 controller with multiple ports that can operate in host mode. Some of the port supports both SS+HS and other port supports only HS mode. This change primarily refactors the Phy logic in core driver to allow multiport support with Generic Phy's. Chananges have been tested on QCOM SoC SA8295P which has 4 ports (2 are HS+SS capable and 2 are HS only capable). Changes in v7: Added power event irq's for Multiport controller. Udpated commit text for patch-9 (adding DT changes for enabling first port of multiport controller on sa8540-ride). Fixed check-patch warnings for driver code. Fixed DT binding errors for changes in snps,dwc3.yaml Reabsed code on top of usb-next Changes in v6: Updated comments in code after. Updated variables names appropriately as per review comments. Updated commit text in patch-2 and added additional info as per review comments. The patch header in v5 doesn't have "PATHCH v5" notation present. Corrected it in this version. Changes in v5: Added DT support for first port of Teritiary USB controller on SA8540-Ride Added support for reading port info from XHCI Extended Params registers. Changes in RFC v4: Added DT support for SA8295p. Changes in RFC v3: Incase any PHY init fails, then clear/exit the PHYs that are already initialized. Changes in RFC v2: Changed dwc3_count_phys to return the number of PHY Phandles in the node. This will be used now in dwc3_extract_num_phys to increment num_usb2_phy and num_usb3_phy. Added new parameter "ss_idx" in dwc3_core_get_phy_ny_node and changed its structure such that the first half is for HS-PHY and second half is for SS-PHY. In dwc3_core_get_phy, for multiport controller, only if SS-PHY phandle is present, pass proper SS_IDX else pass -1. Link to v6: https://lore.kernel.org/all/20230405125759.4201-1-quic_kriskura@quicinc.com/ Link to v5: https://lore.kernel.org/all/20230310163420.7582-1-quic_kriskura@quicinc.com/ Link to RFC v4: https://lore.kernel.org/all/20230115114146.12628-1-quic_kriskura@quicinc.com/ Link to RFC v3: https://lore.kernel.org/all/1654709787-23686-1-git-send-email-quic_harshq@quicinc.com/#r Link to RFC v2: https://lore.kernel.org/all/1653560029-6937-1-git-send-email-quic_harshq@quicinc.com/#r Test results: Bus 3/4 represent multiport controller having 4 HS ports and 2 SS ports. / # dmesg |grep hub [ 0.029029] usbcore: registered new interface driver hub [ 1.372812] hub 1-0:1.0: USB hub found [ 1.389142] hub 1-0:1.0: 1 port detected [ 1.414721] hub 2-0:1.0: USB hub found [ 1.427669] hub 2-0:1.0: 1 port detected [ 2.931465] hub 3-0:1.0: USB hub found [ 2.935340] hub 3-0:1.0: 4 ports detected [ 2.948721] hub 4-0:1.0: USB hub found [ 2.952604] hub 4-0:1.0: 2 ports detected / # / # lsusb Bus 003 Device 001: ID 1d6b:0002 Bus 001 Device 001: ID 1d6b:0002 Bus 003 Device 005: ID 0b0e:0300 Bus 003 Device 002: ID 046d:c077 Bus 004 Device 001: ID 1d6b:0003 Bus 002 Device 001: ID 1d6b:0003 Bus 003 Device 004: ID 03f0:0024 Bus 003 Device 003: ID 046d:c016 Krishna Kurapati (9): dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport dt-bindings: usb: Add bindings for multiport properties on DWC3 controller usb: dwc3: core: Access XHCI address space temporarily to read port info usb: dwc3: core: Skip setting event buffers for host only controllers usb: dwc3: core: Refactor PHY logic to support Multiport Controller usb: dwc3: qcom: Add multiport controller support for qcom wrapper arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280 arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller .../devicetree/bindings/usb/qcom,dwc3.yaml | 21 ++ .../devicetree/bindings/usb/snps,dwc3.yaml | 13 +- arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 47 +++ arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 22 ++ arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 64 ++++ drivers/usb/dwc3/core.c | 352 ++++++++++++++---- drivers/usb/dwc3/core.h | 68 +++- drivers/usb/dwc3/drd.c | 13 +- drivers/usb/dwc3/dwc3-qcom.c | 28 +- 9 files changed, 533 insertions(+), 95 deletions(-)